Electrophoretic deposition of bacterial cells

Electropatterning-Contemporary developments for selective particle arrangements employing electrokinetics

The selective positioning and arrangement of distinct types of multiscale particles can be used in numerous applications in microfluidics, including integrated circuits, sensors and biochips. Electrokinetic (EK) techniques offer an extensive range of options for label-free manipulation and patterning of colloidal particles by exploiting the intrinsic electrical properties of the target of interest. EK-based techniques have been widely implemented in many recent studies, and various methodologies and microfluidic device designs have been developed to achieve patterning two- and three-dimensional (3D) patterned structures. This review provides an overview of the progress in electropatterning research during the last 5 years in the microfluidics arena. This article discusses the advances in the electropatterning of colloids, droplets, synthetic particles, cells, and gels. Each subsection analyzes the manipulation of the particles of interest via EK techniques such as electrophoresis and dielectrophoresis. The conclusions summarize recent advances and provide an outlook on the future of electropatterning in various fields of application, especially those with 3D arrangements as their end goal.

A Brief Insight to the Electrophoretic Deposition of PEEK-, Chitosan-, Gelatin-, and Zein-Based Composite Coatings for Biomedical Applications: Recent Developments and Challenges

Electrophoretic deposition (EPD) is a powerful technique to assemble metals, polymer, ceramics, and composite materials into 2D, 3D, and intricately shaped implants. Polymers, proteins, and peptides can be deposited via EPD at room temperature without affecting their chemical structures. Furthermore, EPD is being used to deposit multifunctional coatings (i.e., bioactive, antibacterial, and biocompatible coatings). Recently, EPD was used to architect multi-structured coatings to improve mechanical and biological properties along with the controlled release of drugs/metallic ions. The key characteristics of EPD coatings in terms of inorganic bioactivity and their angiogenic potential coupled with antibacterial properties are the key elements enabling advanced applications of EPD in orthopedic applications. In the emerging field of EPD coatings for hard tissue and soft tissue engineering, an overview of such applications will be presented. The progress in the development of EPD-based polymeric or composite coatings, including their application in orthopedic and targeted drug delivery approaches, will be discussed, with a focus on the effect of different biologically active ions/drugs released from EPD deposits. The literature under discussion involves EPD coatings consisting of chitosan (Chi), zein, polyetheretherketone (PEEK), and their composites. Moreover, in vitro and in vivo investigations of EPD coatings will be discussed in relation to the current main challenge of orthopedic implants, namely that the biomaterial must provide good bone-binding ability and mechanical compatibility.

Electrophoretic deposition of photocatalytic materials

Powdered photocatalytic materials have been successfully applied for the degradation of organic and inorganic pollutants as well as for hydrogen production and CO₂ photo-reduction. However, the development of strategies for the preparation of photoactive coatings is a hot topic since it is a promising step for its use in photocatalytic reactors on an industrial scale. Electrophoretic deposition is a versatile technique capable to produce coatings of nanoparticles at a relative low cost and with an excellent quality and control of the deposited material. This work summarizes the fundamental aspects of the electrophoretic deposition process, as well as the latest contributions in the deposition of several photocatalytic materials including TiO₂ and other UV-photocatalysts like ZnO, ZnS, SrTiO₃ and PbMoO₄ in addition to visible-light-driven photocatalysts such as Bi₂O₃, CdS, CdSe, g-C₃N₄, among others. Furthermore, the morphological features of the coatings along with the repercussion in the photocatalytic performance are issues discussed in the present review, based on the effect of the multiple parameters of the electrophoretic process such as the applied voltage, the deposition time, the inter-electrode distance, the concentration of the particles, the solvents and additives.

Colloidal Materials for 3D Printing

In recent years, 3D printing has led to a disruptive manufacturing revolution that allows complex architected materials and structures to be created by directly joining sequential layers into designed 3D components. However, customized feedstocks for specific 3D printing techniques and applications are limited or nonexistent, which greatly impedes the production of desired structural or functional materials. Colloids, with their stable biphasic nature, have tremendous potential to satisfy the requirements of various 3D printing methods owing to their tunable electrical, optical, mechanical, and rheological properties. This enables materials delivery and assembly across the multiple length scales required for multifunctionality. Here, a state-of-the-art review on advanced colloidal processing strategies for 3D printing of organic, ceramic, metallic, and carbonaceous materials is provided. It is believed that the concomitant innovations in colloid design and 3D printing will provide numerous possibilities for the fabrication of new constructs unobtainable using traditional methods, which will significantly broaden their applications.

Alternating Current Electrophoretic Deposition for the Immobilization of Antimicrobial Agents on Titanium Implant Surfaces

One prominent cause of implant failure is infection; therefore, research is focusing on developing surface coatings that render the surface resistant to colonization by micro-organisms. Permanently attached coatings of antimicrobial molecules are of particular interest because of the reduced cytoxicity and lower risk of developing resistance compared to controlled release coatings. In this study, we focus on the chemical grafting of bioactive molecules on titanium. To concentrate the molecules at the metallic implant surface, we propose electrophoretic deposition (EPD) applying alternating current (AC) signals with an asymmetrical wave shape. We show that for the model molecule bovine serum albumin (BSA), as well as for the clinically relevant antifungal lipopeptide caspofungin (CASP), the deposition yield is drastically improved by superimposing a DC offset in the direction of the high-amplitude peak of the AC signal. Additionally, in order to produce immobilized CASP coatings, this experimental AC/DC-EPD method is combined with an established surface activation protocol. Principle component analysis (PCA) of time-of-flight secondary ion mass spectrometry (ToF-SIMS) data confirm the immobilization of CASP with higher yield as compared to a diffusion-controlled process, and higher purity than the clinical CASP starting suspensions. Scratch testing data indicate good coating adhesion. Importantly, the coatings remain active against the fungal pathogen C. albicans as shown by in vitro biofilm experiments. In summary, this paper delivers a proof-of-concept for the application of AC-EPD as a fast grafting tool for antimicrobial molecules without compromising their activities.

Alternating Current Electrophoretic Deposition of Bovine Serum Albumin onto Magnesium

Magnesium and magnesium alloys are gaining considerable attention for use in biomedical applications due to their capability to completely resorb in the human body without noticeable side effects. For structural biomedical applications however, the resorption rate is too large. In order to decrease this rate researchers are investigating magnesium alloys with an increased corrosion resistance and/or biodegradable coatings, such as dense protein layers, which retard the resorption.In this work, we demonstrate the electrophoretic deposition of Bovine Serum Albumin (BSA) directly onto pure magnesium substrates using unbalanced alternating fields (AC-EPD). The effect of the obtained coatings on the corrosion behavior of the substrates was evaluated by potentiodynamic polarization. The results show that an albumin layer deposited by AC-EPD from a 50/50 ethanol/H2O medium significantly reduces the corrosion rate.

Measurement of Bacterial Bioluminescence Intensity and Spectrum: Current Physical Techniques and Principles

: Bioluminescence is light production by living organisms, which can be observed in numerous marine creatures and some terrestrial invertebrates. More specifically, bacterial bioluminescence is the "cold light" produced and emitted by bacterial cells, including both wild-type luminescent and genetically engineered bacteria. Because of the lively interplay of synthetic biology, microbiology, toxicology, and biophysics, different configurations of whole-cell biosensors based on bacterial bioluminescence have been designed and are widely used in different fields, such as ecotoxicology, food toxicity, and environmental pollution. This chapter first discusses the background of the bioluminescence phenomenon in terms of optical spectrum. Platforms for bacterial bioluminescence detection using various techniques are then introduced, such as a photomultiplier tube, charge-coupled device (CCD) camera, micro-electro-mechanical systems (MEMS), and complementary metal-oxide-semiconductor (CMOS) based integrated circuit. Furthermore, some typical biochemical methods to optimize the analytical performances of bacterial bioluminescent biosensors/assays are reviewed, followed by a presentation of author's recent work concerning the improved sensitivity of a bioluminescent assay for pesticides. Finally, bacterial bioluminescence as implemented in eukaryotic cells, bioluminescent imaging, and cancer cell therapies is discussed.

Electrophoretic deposition of biomaterials

Electrophoretic deposition (EPD) is attracting increasing attention as an effective technique for the processing of biomaterials, specifically bioactive coatings and biomedical nanostructures. The well-known advantages of EPD for the production of a wide range of microstructures and nanostructures as well as unique and complex material combinations are being exploited, starting from well-dispersed suspensions of biomaterials in particulate form (microsized and nanoscale particles, nanotubes, nanoplatelets). EPD of biological entities such as enzymes, bacteria and cells is also being investigated. The review presents a comprehensive summary and discussion of relevant recent work on EPD describing the specific application of the technique in the processing of several biomaterials, focusing on (i) conventional bioactive (inorganic) coatings, e.g. hydroxyapatite or bioactive glass coatings on orthopaedic implants, and (ii) biomedical nanostructures, including biopolymer-ceramic nanocomposites, carbon nanotube coatings, tissue engineering scaffolds, deposition of proteins and other biological entities for sensors and advanced functional coatings. It is the intention to inform the reader on how EPD has become an important tool in advanced biomaterials processing, as a convenient alternative to conventional methods, and to present the potential of the technique to manipulate and control the deposition of a range of nanomaterials of interest in the biomedical and biotechnology fields.

Do oral biofilms influence the wear and corrosion behavior of titanium?

The main aim of this work was to study the simultaneous wear-corrosion of titanium (Ti) in the presence of biofilms composed of Streptococcus mutans and Candida albicans. Both organisms were separately grown in specific growth media, and then mixed in a medium supplemented with a high sucrose concentration. Corrosion and tribocorrosion tests were performed after 48 h and 216 h of biofilm growth. Electrochemical corrosion tests indicated a decrease in the corrosion resistance of Ti in the presence of the biofilms although the TiO(2) film presented the characteristics of a compact oxide film. While the open circuit potential of Ti indicated a tendency to corrosion in the presence of the biofilms, tribocorrosion tests revealed a low friction on biofilm covered Ti. The properties of the biofilms were similar to those of the lubricant agents used to decrease the wear rate of materials. However, the pH-lowering promoted by microbial species, can lead to corrosion of Ti-based oral rehabilitation systems.