Solar biosupercapacitor

Built-In Piezoelectric Nanogenerators Promote Sustainable and Flexible Supercapacitors: A Review

Energy storage devices such as supercapacitors (SCs), if equipped with built-in energy harvesters such as piezoelectric nanogenerators, will continuously power wearable electronics and become important enablers of the future Internet of Things. As wearable gadgets become flexible, energy items that can be fabricated with greater compliance will be crucial, and designing them with sustainable and flexible strategies for future use will be important. In this review, flexible supercapacitors designed with built-in nanogenerators, mainly piezoelectric nanogenerators, are discussed in terms of their operational principles, device configuration, and material selection, with a focus on their application in flexible wearable electronics. While the structural design and materials selection are highlighted, the current shortcomings and challenges in the emerging field of nanogenerators that can be integrated into flexible supercapacitors are also discussed to make wearable devices more comfortable and sustainable. We hope this work may provide references, future directions, and new perspectives for the development of electrochemical power sources that can charge themselves by harvesting mechanical energy from the ambient environment.

A Nano-Biohybrid-Based Bio-Solar Cell to Regulate the Electrical Signal Transmission to Living Cells for Biomedical Application

Bio-solar cells are studied as sustainable and biocompatible energy sources with significant potential for biomedical applications. However, they are composed of light-harvesting biomolecules with narrow absorption wavelengths and weak transient photocurrent generation. In this study, a nano-biohybrid-based bio-solar cell composed of bacteriorhodopsin, chlorophyllin, and Ni/TiO2 nanoparticles is developed to overcome the current limitations and verify the possibility of biomedical applications. Bacteriorhodopsin and chlorophyllin are introduced as light-harvesting biomolecules to broaden the absorption wavelength. As a photocatalyst, Ni/TiO2 nanoparticles are introduced to generate a photocurrent and amplify the photocurrent generated by the biomolecules. The developed bio-solar cell absorbs a broad range of visible wavelengths and generates an amplified stationary photocurrent density (152.6 nA cm-2 ) with a long lifetime (up to 1 month). Besides, the electrophysiological signals of muscle cells at neuromuscular junctions are precisely regulated by motor neurons excited by the photocurrent of the bio-solar cell, indicating that the bio-solar cell can control living cells by signal transmission through other types of living cells. The proposed nano-biohybrid-based bio-solar cell can be used as a sustainable and biocompatible energy source for the development of wearable and implantable biodevices and bioelectronic medicines for humans.

Stimuli-Responsive Regulation of Biocatalysis through Metallic Nanoparticle Interaction

The remote control of biocatalytic processes in an extracellular medium is an exciting idea to deliver innovative solutions in the biocatalysis field. With this purpose, metallic nanoparticles (NPs) are great candidates, as their inherent thermal, electric, magnetic, and plasmonic properties can readily be manipulated upon external stimuli. Exploring the unique NP properties beyond an anchoring platform for enzymes brings up the opportunity to extend the efficiency of biocatalysts and modulate their activity through triggered events. In this review, we discuss a set of external stimuli, such as light, electricity, magnetism, and temperature, as tools for the regulation of nanobiocatalysis, including the challenges and perspectives regarding their use. In addition, we elaborate on the use of combined stimuli that create a more refined framework in terms of a multiresponsive system. Finally, we envision this review might instigate researchers in this field of study with a set of promising opportunities in the near future.

Photosynthetic Nanomaterial Hybrids for Bioelectricity and Renewable Energy Systems

Harvesting solar energy in the form of electricity from the photosynthesis of plants, algal cells, and bacteria has been researched as the most environment-friendly renewable energy technology in the last decade. The primary challenge has been the engineering of electrochemical interfacing with photosynthetic apparatuses, organelles, or whole cells. However, with the aid of low-dimensional nanomaterials, there have been many advances, including enhanced photon absorption, increased generation of photosynthetic electrons (PEs), and more efficient transfer of PEs to electrodes. These advances have demonstrated the possibility for the technology to advance to a new level. In this article, the fundamentals of photosynthesis are introduced. How PE harvesting systems have improved concerning solar energy absorption, PE production, and PE collection by electrodes is discussed. The review focuses on how different kinds of nanomaterials are applied and function in interfacing with photosynthetic materials for enhanced PE harvesting. Finally, the review analyzes how the performance of PE harvesting and stand-alone systems have evolved so far and its future prospects.

Supercapacitive biofuel cells

Supercapacitive biofuel cells' (SBFCs) most recent advancements are herein disclosed. In conventional SBFCs the biocomponent is employed as the pseudocapacitive component, while in self-charging biodevices it also works as the biocatalyst. The performance of different types of SBFCs are summarized according to the categorization based on the biocatalyst employed: supercapacitive microbial fuel cells (s-MFCs), supercapacitive biophotovoltaics (SBPV) and supercapacitive enzymatic fuel cells (s-EFCs). SBFCs could be considered as promising 'alternative' energy devices (low-cost, environmentally friendly, and technically undemanding electric power sources etc.) being suitable for powering a new generation of miniaturized electronic applications.

Miniature microbial solar cells to power wireless sensor networks

Conventional wireless sensor networks (WSNs) powered by traditional batteries or energy storage devices such as lithium-ion batteries and supercapacitors have challenges providing long-term and self-sustaining operation due to their limited energy budgets. Emerging energy harvesting technologies can achieve the longstanding vision of self-powered, long-lived sensors. In particular, miniature microbial solar cells (MSCs) can be the most feasible power source for small and low-power sensor nodes in unattended working environments because they continuously scavenge power from microbial photosynthesis by using the most abundant resources on Earth; solar energy and water. Even with low illumination, the MSC can harvest electricity from microbial respiration. Despite the vast potential and promise of miniature MSCs, their power and lifetime remain insufficient to power potential WSN applications. In this overview, we will introduce the field of miniature MSCs, from early breakthroughs to current achievements, with a focus on emerging techniques to improve their performance. Finally, challenges and perspectives for the future direction of miniature MSCs to self-sustainably power WSN applications will be given.

Highly sensitive and stable fructose self-powered biosensor based on a self-charging biosupercapacitor

Herein, we present an alternative approach to obtain a highly sensitive and stable self-powered biosensor that was used to detect D-fructose as proof of concept.In this platform, we perform a two-step process, viz. self-charging the biosupercapacitor for a constant time by using D-fructose as fuel and using the stored charge to realize the detection of D-fructose by performing several polarization curves at different D-fructose concentrations. The proposed BSC shows an instantaneous power density release of 17.6 mW cm^-2 and 3.8 mW cm^-2 in pulse mode and at constant load, respectively. Moreover, the power density achieved for the self-charging BSC in pulse mode or under constant load allows for an enhancement of the sensitivity of the device up to 10 times (3.82 ± 0.01 mW cm^-2 mM^-1, charging time = 70 min) compared to the BSC in continuous operation mode and 100 times compared to the normal enzymatic fuel cell. The platform can potentially be employed as a self-powered biosensor in food or biomedical applications.

Recent Progress in Applications of Enzymatic Bioelectrocatalysis

Bioelectrocatalysis has become one of the most important research fields in electrochemistry and provided a firm base for the application of important technology in various bioelectrochemical devices, such as biosensors, biofuel cells, and biosupercapacitors. The understanding and technology of bioelectrocatalysis have greatly improved with the introduction of nanostructured electrode materials and protein-engineering methods over the last few decades. Recently, the electroenzymatic production of renewable energy resources and useful organic compounds (bioelectrosynthesis) has attracted worldwide attention. In this review, we summarize recent progress in the applications of enzymatic bioelectrocatalysis.

Scalable Fabrication of Biophotoelectrodes by Means of Automated Airbrush Spray-Coating

The fabrication and electrochemical evaluation of transparent photoelectrodes consisting of Photosystem I (PSI) or Photosystem II (PSII) is described, which are embedded and electrically wired by a redox polymer. The fabrication process is performed by an automated airbrush-type spray coating system, which ensures controlled and scalable electrode preparation. As proof of concept, electrodes with a surface area of up to 25 cm² were prepared. The macro-porous structure of the indium tin oxide electrodes allows a high loading of the photoactive protein complexes leading to enhanced photocurrents, which are essential for potentially technologically relevant solar-powered devices. In addition, we show that unpurified crude PSII extracts, which can be provided in comparatively high yields for electrode modification, are suitable for photoelectrode fabrication with comparable photocurrent densities.

The emerging science of electrosynbionics

Dramatic changes in electricity generation, use and storage are needed to keep pace with increasing demand while reducing carbon dioxide emissions. There is great potential for application of bioengineering in this area. We have the tools to re-engineer biological molecules and systems, and a significant amount of research and development is being carried out on technologies such as biophotovoltaics, biocapacitors, biofuel cells and biobatteries. However, there does not seem to be a satisfactory overarching term to describe this area, and I propose a new word-'electrosynbionics'. This is to be defined as: the creation of engineered devices that use components derived from or inspired by biology to perform a useful electrical function. Here, the phrase 'electrical function' is taken to mean the generation, use and storage of electricity, where the primary charge carriers may be either electrons or ions. 'Electrosynbionics' is distinct from 'bioelectronics', which normally relates to applications in sensing, computing or electroceuticals. Electrosynbionic devices have the potential to solve challenges in electricity generation, use and storage by exploiting or mimicking some of the desirable attributes of biological systems, including high efficiency, benign operating conditions and intricate molecular structures.

A self-charging cyanobacterial supercapacitor

Microliter-scale photosynthetic microbial fuel cells (micro-PMFC) can be the most suitable power source for unattended environmental sensors because the technique can continuously generate electricity from microbial photosynthesis and respiration through day-night cycles, offering a clean and renewable power source with self-sustaining potential. However, the promise of this technology has not been translated into practical applications because of its relatively low performance. By creating an innovative supercapacitive micro-PMFC device with maximized bacterial photoelectrochemical activities in a well-controlled, tightly enclosed micro-chamber, this work established innovative strategies to revolutionize micro-PMFC performance to attain stable high power and current density (38 μW/cm² and 120 μA/cm²) that then potentially provides a practical and sustainable power supply for the environmental sensing applications. The proposed technique is based on a 3-D double-functional bio-anode concurrently exhibiting bio-electrocatalytic energy harvesting and charge storing. It offers the high-energy harvesting functionality of micro-PMFCs with the high-power operation of an internal supercapacitor for charging and discharging. The performance of the supercapacitive micro-PMFC improved significantly through miniaturizing innovative device architectures and connecting multiple miniature devices in series.