Quaternary Ammonium Compound in Anolyte without Functionalization Accelerates the Startup of Bioelectrochemical Systems using Real Wastewater

Dynamic membrane filtration accelerates electroactive biofilms in bioelectrochemical systems

Bioelectrochemical systems (BES) have emerged as a dual-function technology for treating wastewater and recovering energy. A vital element of BES is the rapid formation and maintenance of electroactive biofilms (EABs). Previous attempts to accelerate EAB formation and improve electroactivities focused on enhancing the bacterial adhesion process while neglecting the rate-limiting step of the bacterial transport process. Here, we introduce membrane filtration into BES, establishing a dynamic membrane filtration system that enhances overall performance. We observed that optimal membrane flux considerably reduced the startup time for EAB formation. Specifically, EABs established under a 25 L m-2 h-1 flux (EAB25 LMH) had a formation time of 43.8 ± 1.3 h, notably faster than the 51.4 ± 1.6 h in the static state (EAB0 LMH). Additionally, EAB25 LMH exhibited a significant increase in maximum current density, approximately 2.2 times higher than EAB0 LMH. Pearson correlation analysis indicated a positive relationship between current densities and biomass quantities and an inverse correlation with startup time. Microbial analysis revealed two critical findings: (i) variations in maximum current densities across different filtration conditions were associated with redox-active substances and biomass accumulation, and (ii) the incorporation of a filtration process in EAB formation enhanced the proportion of viable cells and encouraged a more diverse range of electroactive bacteria. Moreover, the novel electroactive membrane demonstrated sustained current production and effective solid-liquid separation during prolonged operation, indicating its potential as a viable alternative in membrane-based systems. This approach not only provides a new operational model for BES but also holds promise for expanding its application in future wastewater treatment solutions.

Response of electroactive biofilms from real wastewater to metal ion shock in bioelectrochemical systems

The electrochemical activity of bioelectrochemical systems (BESs) was proven to be dependent on the stability of electroactive biofilms (EABs), but the response of EABs based on real wastewater to external disturbances is not fully known. Herein, we used real wastewater (beer brewery wastewater) as a substrate for culturing EABs and found that current generation, biomass, redox activity and extracellular polymeric substances (EPS) content in those EABs were lower as compared to EABs cultured with synthetic wastewaters (acetate and glucose). However, the EABs from the beer brewery wastewater showed moderate anti-shock resistance capability. The proteins and humic acid in loosely bound EPS (LB-EPS) exhibited a positive linear relationship with current recovery after Ag⁺ shock, indicating the importance of LB-EPS for protecting the EABs. Fluorescence and Fourier transform infrared spectroscopy integrated with two-dimensional correlation spectroscopy verified that the spectra of the protein-like region of LB-EPS changed considerably under the interference of Ag⁺ concentration and the CO group of humic acid or proteins was mainly responsible for binding with Ag⁺ to attenuate its toxicity to the EABs. This is the first study revealing the underlying molecular mechanism of EABs cultured with real wastewater against external heavy metal shock and provides useful insights into enhancing the application of BESs in future water treatment.

Role of bioelectrochemical systems for the remediation of emerging contaminants from wastewater: A review

Bioelectrochemical systems (BESs) are a unique group of wastewater remediating technology that possesses the added advantage of valuable recovery with concomitant wastewater treatment. Moreover, due to the application of robust microbial biocatalysts in BESs, effective removal of emerging contaminants (ECs) can be accomplished in these BESs. Thus, this review emphasizes the recent demonstrations pertaining to the removal of complex organic pollutants of emerging concern present in wastewater through BES. Owing to the recalcitrant nature of these pollutants, they are not effectively removed through conventional wastewater treatment systems and thereby are discharged into the environment without proper treatment. Application of BES in terms of ECs removal and degradation mechanism along with valuables that can be recovered are discussed. Moreover, the factors affecting the performance of BES, like biocatalyst, substrate, salinity, and applied potential are also summarized. In addition, the present review also elucidates the occurrence and toxic nature of ECs as well as future recommendations pertaining to the commercialization of this BES technology for the removal of ECs from wastewater. Therefore, the present review intends to aid the researchers in developing more efficient BESs for the removal of ECs from wastewater.

Efficient decolorization of azo dye wastewater with polyaniline/graphene modified anode in microbial electrochemical systems

Azo dye pollution has become a worldwide issue, and the current treatment methods can hardly meet the expected emission standards. Microbial electrochemical systems (MESs) show promising applications for decolorization, but their performance critically depends on the microorganisms. Electrode modification is an interesting method of improving decolorization performance. However, the mechanisms of how the modification can affect microbial communities and the decolorization process remain unclear. Here, a modified anode with polyaniline (PANI) and graphene was fabricated via electro-deposition. Consequently, the highest decolorization efficiency was obtained. The Congo red (CR) decolorization rate of the MESs with the PANI/graphene-modified electrode (PG) reached 90% at 54 h. By contrast, the CR decolorization rates of the MESs with the PANI-modified electrode (P) and those of the MESs with the unmodified electrode (C) only reached 68% and 79%, respectively. Results of the microbial community analysis showed abundant Methanobrevibacter arboriphilus in PG (11%), which was 5.5 times that in C (2%) at 18 h. This phenomenon may be related to the rapid decolorization. The upregulated metabolism pathways, including arginine and proline metabolism, purine metabolism, arginine biosynthesis, and riboflavin metabolism, provided more electron shuttles and redox mediators that facilitated the extracellular electron transfer. Therefore, the PG-modified electrode facilitated the decolorization by altering certain metabolic pathways. This study can help to improve the guideline on the potential application of MESs for wastewater treatment.

Insight of bacteria and archaea in Feammox community enriched from different soils

Anaerobic ammonium oxidation coupled to Fe(III) reduction, known as Feammox, is a newly discovered nitrogen-cycling process, which serves an important role in the pathways of nitrogen loss in the environment. However, the specific types of microorganisms involved in Feammox currently remain unclear. In this study, we selected two groups of soil samples (paddy and mine), from considerably different habitats in South China, to acclimate Feammox colonies. The Paddy Group had a shorter lag period than the Mine Group, while the ammonium transformation rate was nearly equal in both groups in the mature period. The emergence of the Feammox activity was found to be associated with the increased abundance of iron-reducing bacteria, especially Clostridium_sensu_stricto_12, Desulfitobacterium, Thermoanaerobaculum, Anaeromyxobacter and Geobacter. Ammonium oxidizing archaea and methanogens were dominant among the known archaea. These findings extend our knowledge of the microbial community composition of the potential Feammox microbes from soils under different environmental conditions, which broadens our understanding of this important Fe/N transformation process.

A promising destiny for Feammox: From biogeochemical ammonium oxidation to wastewater treatment

Ammonium is one of the most common forms of nitrogen that exists in wastewater, and it can cause severe pollution when it is discharged without treatment. New technologies must be developed to effectively remove ammonium because conventional nitrification-denitrification methods are limited by the lack of organic carbon. Anaerobic ammonium oxidation coupled to Fe(III) reduction is known as Feammox, and is a recently discovered nitrogen cycling process. Feammox can proceed under autotrophic or anaerobic conditions and effectively transforms ammonium to stable, innocuous dinitrogen gas, using the ferric iron as an electron acceptor. This method is cost-effective, environmentally friendly, and conducive to joint application with other nitrogen removal reactions in low-C/N municipal wastewater treatments. This review provides a comprehensive survey of Feammox mechanistic investigations and presents studies regarding the functional microorganism colonies. The potential for Feammox to be applied for the removal of nitrogen from various polluted water sources and the combination of the Feammox process with other frontier environmental technologies are also discussed. In addition, future perspectives for removing ammonium using Feammox are presented.

Excessive extracellular polymeric substances induced by organic shocks accelerate electron transfer of oxygen reducing biocathode

Electrotrophic bacteria on cathodes are promising substitutes to precious metals as oxygen reduction reaction catalysts in bioelectrochemical systems (BESs). Leading the anodic effluent to the biocathode has additional benefits of neutralizing pH and removing residual pollutants. However, the overflow of excessive organic pollutants inhibits the activity of autotrophic biocathodes. Adding glucose as an organic shock, we confirm that the startup time of biocathodes is initially prolonged by 1.2 times with a decrease in current. However, the currents inversely surpass the control in glucose-added BESs when the biofilm is mature, and the maximum current density increase by 5.5 times with a relatively stable performance. This increase is mainly attributed to the production of agglomerates dominated by polysaccharides and proteins as extracellular polymeric substances. These agglomerates wrap additional redox shuttles that accelerated the electron transfer between electrotrophic bacteria and the cathode. This study demonstrates for the first time that organic shocks enhance the electroactivity of autotrophic biocathodes and provides insights into the feedback mechanisms of electrotrophic microbial community to environmental changes.

Anode potential-dependent protection of electroactive biofilms against metal ion shock via regulating extracellular polymeric substances

Extracellular polymeric substances (EPS) have been considered as a barrier for toxic species penetration into the cells, but their function in protecting electroactive biofilms (EABs) had been rarely revealed. In this study, the anode potential was used to regulate the EPS quantity and components in mixed-culture EABs, where their resistance to Ag⁺ shock was assessed. The results showed that the EAB grown at 0 V showed the highest anti-shock capability by the Ag⁺ exposure compared to those grown at -0.2, 0.2, and 0.4 V. The EAB produced at 0 V had both of the highest amounts of loosely bound EPS (LB-EPS; 61.9 mg-EPS/g-VSS) and tightly bound EPS (TB-EPS; 74.8 mg-EPS/g-VSS) than those grown under other potentials, where proteins and humic acid were the predominated components. The abundance of genes associated with EPS biosynthesis were also confirmed to be related with the applied anode potentials, based on the metagenomic analysis. Considering proteins and humic acid in LB-EPS showed positive linearity with the current recovery and viability of the EABs, these two main components might play important roles in reducing the Ag⁺ toxicity. Synchronous fourier transform infrared (FTIR) spectroscopy integrated two-dimensional correlation spectroscopy (2D-COS) analyses further confirmed that the oxygen and nitrogen moieties (i.e. amide, carbonyl CO, phenolic, and C-O-C) in proteins and humic acid of the LB-EPS were response for the binding with the Ag⁺ to prevent the penetration into the cells. The underlying molecular mechanisms of EPS in protecting EABs from the Ag⁺ shock explored in this study can provide implications for developing new methods to construct highly stable EABs.

Acetate limitation selects Geobacter from mixed inoculum and reduces polysaccharide in electroactive biofilm

Bioelectrochemical systems (BESs) are widely investigated as a promising technology to recover bioenergy or synthesize value-added products from wastewaters. The performance of BES depends on the activity of electroactive biofilm (EAB). As the core of BES, it is still unclear how the EAB is formed from mixed inoculum, and how exoelectrogens compete with non-exoelectrogens. Here we confirmed that microbial community composition and the morphology of EAB on the electrode including the thickness and porosity of the biofilm are critical for the performance of BES, and these properties can be simply controlled by the substrate concentration during EAB formation. The EAB formed with 0.1 g/L of acetate (EAB-0.1) exhibited a 90% higher current density than that formed with 1.0 g/L acetate (EAB-1.0). EAB-0.1 had a 50% higher electroactivity per biomass and a 20% thinner thickness than EAB-1.0, which was partly due to the 54% decrease of insulative polysaccharide in biofilm. Limited acetate also imposed a selective pressure to enrich Geobacter up to 88% compared to 72% when acetate was abundant. Our findings demonstrate that a highly active EAB can be formed by limiting substrate concentration, providing a broader understanding of the EAB formation process, the ecology of interspecies competitions and potential applications for bioenergy recovery and trace toxicant detection in the future.

Optimal set of electrode potential enhances the toxicity response of biocathode to formaldehyde

The autotrophic biocathode was promising as a broad spectrum, rapid-responding and sensitive sensing element for the early warning of toxicants in water. However, we found that the baseline current and the responsivity strongly relied on the cathode potential. Here we poised cathode potentials at 0, -0.2 and -0.4 V to investigate the effect of electrode potential on the sensor responsivity. With formaldehyde as the tested toxicant, the biocathode poised at -0.2 V had the highest baseline current (118.2 ± 10.7 A m^-2) and the lowest toxicity response concentration (0.00148%), which exhibited a 6-64 times higher response ratio (1.4 × 10⁴ A%^-1 m^-3) than those controlled at 0 V (2.3 × 10³ A%^-1 m^-3) and -0.4 V (2.2 × 10² A%^-1 m^-3). First derivative of cyclic voltammetries revealed that the biocathode acclimated at -0.2 V had a highest main peak centered at 0.301 ± 0.006 V and several minor peaks between -0.2 to 0.2 V. Bacterial community analysis showed that Proteobacteria and Bacteroidetes families closely related to the sensing performance. Interestingly, Nitrospirae was obviously acclimated at -0.2 V, indicating that bacteria belonging to this phylum possibly contributed to the highest responsivity as well. Our findings revealed that the optimal set of electrode potential was critical to promote the toxicity responses of biocathode to the formaldehyde, and the differences were mainly from the microbial communities selected by different cathode potentials.

Swift Acid Rain Sensing by Synergistic Rhizospheric Bioelectrochemical Responses

Acid rain poses significant threats to crops and causes a decline in food production, but current monitoring and response to acid rain damage is either slow or expensive. The direct damage observation on plants can take several hours to days when the damage is irreversible. This study presents a real time bioelectrochemical monitoring approach that can detect acid rain damage within minutes. The rhizospheric bioelectrochemical sensor (RBS) takes advantage of the fast chain responses from leaves to roots, and then to the microbial electrochemical reactions in the rhizosphere. Immediate and repeatable current fluctuations were observed within 2 min after acid rain, and such changes were found to correspond well to the changes in rhizospheric organic concentration and electrochemical responses. Such correlation not only can be observed during acid rain events that can be remedied via rinsing, but it was also validated when such damage is irreversible, resulted in zero current, photosynthetic efficiency, and electrochemical signals. The alanine, aspartate, and glutamate metabolism and galactose metabolism in leaves and roots were inhibited by the acid rain, which resulted in the decrease of rhizodeposits such as fumaric acid, d-galactose, and d-glucose. These changes resulted in reduced electroactivity of anodic microorganisms, which was confirmed by a reduced redox current, a narrower spectrum in differential pulse voltammetry, and the loss of peak in the Bode plot. These findings indicate that the RBS process can be a simple, swift, and low-cost monitoring tool for acid rain that allows swift remediation measures, and its potential may be broadened to other environmental monitoring applications.

Syntrophic Growth of Geobacter sulfurreducens Accelerates Anaerobic Denitrification

Nitrate is considered as a contamination since it's over discharging to water incurs environmental problems. However, nitrate is an ideal electron sink for anaerobic pollutant degraders desiring electron acceptors due to the high redox potential. Unfortunately, not all degraders can directly reduce nitrate, and the anaerobic direct interspecies electron transfer (DIET) between degraders and denitrifiers has not been confirmed yet. Here we demonstrated that syntrophic growth of Geobacter sulfurreducens PCA with denitrifying microbial community at anaerobic condition eliminated the lag phase of 15 h and improved the denitrification rate by 13∼51% over a broad C/N ratio of 0.5 to 9. Quantitative PCR revealed that G. sulfurreducens selectively enhanced the expression of nirS coding for a cytochrome cd1-nitrite reductase, resulting in a fast and more complete denitrification. Geobacter also selectively enriched its potential denitrifying partners - Diaphorobacter, Delftia, and Shinella - to form spherical aggregates. More studies of the binary culture system need to be carried out to confirm the syntrophic mechanism of Geobacter and denitrifiers in the future. These findings extend our knowledge on understanding the anaerobic bacterial interspecies electron transfer in the denitrification process, which has broader implications in fast selection and stabilization of denitrifiers in wastewater treatment plant, and general understanding of ecology for nitrogen and metal cycling.

Subminimal inhibitory concentration (sub-MIC) of antibiotic induces electroactive biofilm formation in bioelectrochemical systems

Electroactive biofilms (EABs) generated from mixed inocula are attractive due to their unique direct extracellular electron transfer abilities and potential use in water pollution control. In this study, for the first time, we identified a chemical that can be used for EAB regulation (both inhibition and promotion). We confirmed that tobramycin, an antibiotic previously demonstrated to inhibit the activity of EABs, is an agonist of EAB formation at subminimal inhibitory concentrations (sub-MICs). Compared to the control, at tobramycin concentrations of 0.05 (1/80 MIC) and 0.1 mg/L (1/40 MIC), the time required to reach 3 A/m² was shorter, and the limiting current densities increased by 17%. The enhanced EAB activity was primarily attributed to the 50% increase in biomass density from 289 ± 21 to 434 ± 12 μg protein/cm² and the increased biofilm thickness from 28 ± 1 to 37 ± 0.5 μm. Geobacter species in the microbial communities were selectively increased from 76% to 82%, and their abundance was estimated to increase by 1.63-fold. The accelerated growth was further confirmed using the model strain G. sulfurreducens PCA. Transcriptomic analysis revealed that 0.05 mg/L of tobramycin led to a significant upregulation of genes related to cytochromes and the type IV pilus, suggesting a possible mechanism for the observed current enhancement. These findings extend our knowledge of the regulation of EAB formation by antibiotics and the selective enrichment of Geobacter from a mixed culture, with broader implications on the potential impact of trace antibiotics on the dissimilatory metal reduction process in water environment.

Syntrophic association and performance of Clostridium, Desulfovibrio, Aeromonas and Tetrathiobacter as anodic biocatalysts for bioelectricity generation in dual chamber microbial fuel cell

Anode chamber of a dual chamber microbial fuel cell (MFC) having raw landfill leachate was inoculated with consortium of sulphate-reducing bacteria (SRB) and sulphide-oxidizing bacteria (SOB) to study the phylogenetic architecture, function and mutualism of anolyte community developed in the reactor. Enriched microbial community was analysed with the help of Illumina MiSeq and indicated the dominance of Firmicutes (41.4%), Clostridia (36.4%) and Clostridium (12.9%) at phylum, class and genus level, respectively. Clostridium was associated with fermentation as well as transfer of electrons to the electrode mediated by ferredoxin. Desulfovibrio (6.7%), Aeromonas (6.6%) and Tetrathiobacter (9.8%) were SRB-SOB associated with direct electron transfer to the electrode. Community analysis disclosed a syntrophic association among novel Firmicutes and Proteobacteria species for bioelectricity generation and degradation of organic matter. Complete removal of chemical oxygen demand was observed from landfill leachate within 3 days of inoculation. Lower oxidative slope and polarization resistance revealed from Tafel analysis backed the feasibility of electron transfer from microbes to anodic electrode and thus development of efficient anode-respiring community. Following enrichment and stabilization of the anodic community, maximum power density achieved was 9.15 W/m³ and volumetric current density was 16.17 A/m³. Simultaneous feeding with SRB-SOB and landfill leachate led to the enrichment of a novel, mutually interdependent microbial community capable of synchronized bioremediation of effluents rich in carbon, sulphate, nitrate and aromatic compounds.

Alternating Current Influences Anaerobic Electroactive Biofilm Activity

Alternating current (AC) is known to inactivate microbial growth in suspension, but how AC influences anaerobic biofilm activities has not been systematically investigated. Using a Geobacter dominated anaerobic biofilm growing on the electrodes of microbial electrochemical reactors, we found that high frequency AC ranging from 1 MHz to 1 kHz (amplitude of 5 V, 30 min) showed only temporary inhibition to the biofilm activity. However, lower frequency (100 Hz, 1.2 or 5 V) treatment led to 47 ± 19% permanent decrease in limiting current on the same biofilm, which is attributed to the action of electrohydrodynamic force that caused biofilm damage and loss of intercellular electron transfer network. Confocal microscopy images show such inactivation mainly occurred at the interface between the biofilm and the electrode. Reducing the frequency further to 1 Hz led to water electrolysis, which generated gas bubbles that flushed all attached cells out of the electrode. These findings provide new references on understanding and regulating biofilm growth, which has broader implications in biofouling control, anaerobic waste treatment, energy and product recovery, and general understanding of microbial ecology and physiology.