A single-step fabrication of CoTe2 nanofilm electrode toward efficient overall water splitting

2D Ferromagnetic M3GeTe2 (M = Ni/Fe) for Boosting Intermediates Adsorption toward Faster Water Oxidation

In this work, 2D ferromagnetic M3GeTe2 (MGT, M = Ni/Fe) nanosheets with rich atomic Te vacancies (2D-MGTv) are demonstrated as efficient OER electrocatalyst via a general mechanical exfoliation strategy. X-ray absorption spectra (XAS) and scanning transmission electron microscope (STEM) results validate the dominant presence of metal-O moieties and rich Te vacancies, respectively. The formed Te vacancies are active for the adsorption of OH* and O* species while the metal-O moieties promote the O* and OOH* adsorption, contributing synergistically to the faster oxygen evolution kinetics. Consequently, 2D-Ni3GeTe2v exhibits superior OER activity with only 370 mV overpotential to reach the current density of 100 mA cm-2 and turnover frequency (TOF) value of 101.6 s-1 at the overpotential of 200 mV in alkaline media. Furthermore, a 2D-Ni3GeTe2v-based anion-exchange membrane (AEM) water electrolysis cell (1 cm2) delivers a current density of 1.02 and 1.32 A cm-2 at the voltage of 3 V feeding with 0.1 and 1 m KOH solution, respectively. The demonstrated metal-O coordination with abundant atomic vacancies for ferromagnetic M3GeTe2 and the easily extended preparation strategy would enlighten the rational design and fabrication of other ferromagnetic materials for wider electrocatalytic applications.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Bimetallic Zn/Co telluride spinel with enhanced metal-tellurium covalency for efficient water oxidation

A telluride-spinel ZnCo₂Te₄/NF catalyst delivered an overpotential (η) of only 370 mV to achieve a current density of 100 mA cm^-2 and displayed no significant degradation of performance during 50 h of operation. By virtue of in situ synchrotron infrared spectroscopic detection, an accumulation of key OOH* intermediates over the active site was observed, suggesting that the reaction followed the efficient adsorbate evolution mechanism (AEM) for water oxidation.

Boosting cobalt ditelluride quantum-rods anode materials for excellent potassium-ion storage via hierarchical physicochemical encapsulation

The exploration of anode materials that can store large-sized K-ion to solve the poor kinetics and large volume expansion issues has become the key scientific bottlenecks hindering the development of potassium-ion batteries (PIBs). Herein, ultrafine CoTe₂ quantum rods physiochemically encapsulated by graphene and nitrogen-doped carbon (CoTe₂@rGO@NC) are regarded as anode electrodes for PIBs. Dual physicochemical confinement and quantum size effect not only enhance electrochemical kinetics but also restrain large lattice stress during repeated K-ion insertion/extraction process. Superior electronic conductivity, K-ion adsorption, and diffusion ability can be acquired for CoTe₂@rGO@NC, confirmed through first-principles calculations and kinetics study. K-ion insertion/extraction proceeds via a typical conversion mechanism relying on Co as the redox site, where the robust chemical bond of COCo plays an important role in maintaining the electrode stability. Accordingly, CoTe₂@rGO@NC contributes a high initial capacity of 237.6 mAh·g^-1 at 200 mA·g^-1, a long lifetime over 500 cycles with low-capacity decay of 0.10% per cycle. This research will lay the materials science foundation for the construction of quantum-rod electrodes.

Dual Integrating Oxygen and Sulphur on Surface of CoTe Nanorods Triggers Enhanced Oxygen Evolution Reaction

The bottleneck of large-scale implementation of electrocatalytic water-splitting technology lies in lacking inexpensive, efficient, and durable catalysts to accelerate the sluggish oxygen evolution reaction kinetics. Owing to more metallic features, transition metal telluride (TMT) with good electronic conductivity holds promising potential as an ideal type of electrocatalysts for oxygen evolution reaction (OER), whereas most TMTs reported up to now still show unsatisfactory OER performance that is far below corresponding sulfide and selenide counterparts. Here, the activation and stabilization of cobalt telluride (CoTe) nanoarrays toward OER through dual integration of sulfur (S) doping and surface oxidization is reported. The as-synthesized CoO@S-CoTe catalyst exhibits a low overpotential of only 246 mV at 10 mA cm^-2 and a long-term stability of more than 36 h, outperforming commercial RuO₂ and other reported telluride-based OER catalysts. The combined experimental and theoretical results reveal that the enhanced OER performance stems from increased active sites exposure, improved charge transfer ability, and optimized electronic state. This work will provide a valuable guidance to release the catalytic potential of telluride-based OER catalysts via interface modulating engineering.

Chrysanthemum-like FeS/Ni3S2 heterostructure nanoarray as a robust bifunctional electrocatalyst for overall water splitting

The development of a scalable strategy to prepare highly efficient and stable bifunctional electrocatalysts is the key to industrial electrocatalytic water splitting cycles to produce clean hydrogen. Here, a simple and quick one-step hydrothermal method was used to successfully fabricate a three-dimensional core chrysanthemum-like FeS/Ni₃S₂ heterogeneous nanoarray (FeS/Ni₃S₂@NF) on a porous nickel foam skeleton. Compared with the monomer Ni₃S₂@NF, the chrysanthemum-like FeS/ Ni₃S₂@NF heterostructure nanomaterials have improved catalytic performance in alkaline media, showing low overpotentials of 192 mV (η₁₀) and 130 mV (η_-10) for OER and HER, respectively. This study attests that integrated interface engineering and precise morphology control are effective strategies for activating the Ni³⁺/Ni²⁺ coupling, promoting charge transfer and improving the intrinsic activity of the material to accelerate the OER reaction kinetics and promote the overall water splitting performance. The scheme can be reasonably applied to the design and development of transition metal sulfide-based electrocatalysts to put into industrial practice of electrochemical water oxidation.

Electrocatalyst Design for Conversion of Energy Molecules: Electronic State Modulation and Mass Transport Regulation

Electrocatalytic conversions of energy molecules are involved in many energy conversion processes. Improving the activity of electrocatalyst is critical for increasing the efficiency of these energy conversion processes. However, the...

CoTe2–NiTe2 heterojunction directly grown on CoNi alloy foam for efficient oxygen evolution reaction

One-step fabrication of a self-supported CoTe2–NiTe2 heterojunction electrocatalyst directly grown on CoNi foam for efficient and durable oxygen evolution reactions.

Tuning the Intrinsic Activity and Electrochemical Surface Area of MoS2 via Tiny Zn Doping: Toward an Efficient Hydrogen Evolution Reaction (HER) Catalyst

Molybdenum sulfide (MoS₂ ) is considered as an alternative material for commercial platinum catalysts for electrocatalytic hydrogen evolution reaction (HER). Improving the apparent HER activity of MoS₂ to a level comparable to that of Pt is an essential premise for the commercial use of MoS₂ . In this work, a Zn-doping strategy is proposed to enhance the HER performance of MoS₂ . It is shown that tiny Zn doping into MoS₂ leads to the enhancement of the electrochemical surface area, increases in proportion of HER active 1T phase in the material and formation of catalytic sites of higher intrinsic activity. These benefits result in a high-performance HER electrocatalyst with a low overpotential of 190 mV(@10 mA cm^-2 ) and a low Tafel slope of 58 mV dec^-1 . The origin for the excellent electrochemical performance of the doped MoS₂ is rationalized with both experimental and theoretical investigations.

Orthorhombic Cobalt Ditelluride with Te Vacancy Defects Anchoring on Elastic MXene Enables Efficient Potassium-Ion Storage

The fast and reversible potassiation/depotassiation of anode materials remains an elusive yet intriguing goal. Herein, a class of the P-doping-induced orthorhombic CoTe₂ nanowires with Te vacancy defects supported on MXene (o-P-CoTe₂ /MXene) is designed and prepared, taking advantage of the synergistic effects of the conductive o-P-CoTe₂ arrays with rich Te vacancy defects and the elastic MXene sheets with self-autoadjustable function. Consequently, the o-P-CoTe₂ /MXene superstructure exhibits boosted potassium-storage performance, in terms of high reversible capacity (373.7 mAh g^-1 at 0.2 A g^-1 after 200 cycles), remarkable rate capability (168.2 mAh g^-1 at 20 A g^-1 ), and outstanding long-term cyclability (0.011% capacity decay per cycle over 2000 cycles at 2 A g^-1 ), representing the best performance in transition-metal-dichalcogenides-based anodes to date. Impressively, the flexible full battery with o-P-CoTe₂ /MXene anode achieves a satisfying energy density of 275 Wh kg^-1 and high bending stability. The kinetics analysis and first-principles calculations reveal superior pseudocapacitive property, high electronic conductivity, and favorable K⁺ ion adsorption and diffusion capability, corroborating fast K⁺ ion storage. Especially, ex situ characterizations confirm o-P-CoTe₂ /MXene undergoes reversible evolutions of initially proceeding with the K⁺ ion insertion, followed by the conversion reaction mechanism.

Phase Transitions and Water Splitting Applications of 2D Transition Metal Dichalcogenides and Metal Phosphorous Trichalcogenides

2D layered materials turn out to be the most attractive hotspot in materials for their unique physical and chemical properties. A special class of 2D layered material refers to materials exhibiting phase transition based on environment variables. Among these materials, transition metal dichalcogenides (TMDs) act as a promising alternative for their unique combination of atomic-scale thickness, direct bandgap, significant spin-orbit coupling and prominent electronic and mechanical properties, enabling them to be applied for fundamental studies as catalyst materials. Metal phosphorous trichalcogenides (MPTs), as another potential catalytic 2D phase transition material, have been employed for their unusual intercalation behavior and electrochemical properties, which act as a secondary electrode in lithium batteries. The preparation of 2D TMD and MPT materials has been extensively conducted by engineering their intrinsic structures at the atomic scale. In this study, advanced synthesis methods of preparing 2D TMD and MPT materials are tested, and their properties are investigated, with stress placed on their phase transition. The surge of this type of report is associated with water-splitting catalysis and other catalytic purposes. This study aims to be a guideline to explore the mentioned 2D TMD and MPT materials for their catalytic applications.

Activating the hydrogen evolution activity of Pt electrode via synergistic interaction with NiS2

Electrocatalytic hydrogen evolution reaction (HER) is a green approach to produce high-quality hydrogen fuel. Developing efficient electrocatalyst is the key to realize cost-effective HER. Pt is the state-of-the-art HER catalyst so far. However, the use of Pt for HER is limited by its high cost. Thus, it is essential to lower down the usage of Pt in the electrocatalyst by improving the intrinsic activity of Pt. In this work, we propose to achieve this goal by introducing synergistic interaction between Pt and substrate material (NiS₂). The favorable synergy interaction can modify the d band structure of Pt (111) facet and modulate the hydrogen adsorption on Pt (111), which enhances the intrinsic electrocatalytic activity of Pt. The effectiveness of this strategy is demonstrated with both experimental and theoretical investigations.

Self-supported cobalt–nickel bimetallic telluride as an advanced catalyst for the oxygen evolution reaction

The Ni-doped Co@CoTe2 electrode exhibits an outstanding OER activity and excellent long-term stability and outperforms most of the well-studied Co-based dichalcogenides.

Antiblocking Heterostructure to Accelerate Kinetic Process for Na-Ion Storage

Heterostructures are attracting increasing attention in the field of sodium-ion batteries. However, it is still unclear whether any two monophase components can be used to construct a high-performance heterostructure for sodium-ion batteries, as well as the kind of heterostructures that can boost electrochemical performances. In this study, based on classical semiconductor theories on antiblocking and blocking interfaces, attempts are made to answer the abovementioned queries. For this purpose, NiTe₂ -ZnTe antiblocking and CoTe₂ -ZnTe blocking heterostructures are synthesized through a bimetal-hexamine framework-derived strategy. The NiTe₂ -ZnTe antiblocking heterostructure exhibits excellent high-rate and cycling performances, while the CoTe₂ -ZnTe blocking heterostructure performs poorly, even compared to their monophase components. Further, kinetic measurements and theoretical calculation confirm that antiblocking heterointerfaces can boost Na-ion diffusion efficiency and decrease the diffusion barrier, which can be attributed to the highly conductive antiblocking heterointerfaces generated due to electron transfer from NiTe₂ to ZnTe. Therefore, this study provides a new perspective to design heterostructures more efficiently, with significantly better Na-ion storage performance.

Metal-Organic Framework-Derived Fe-Doped Co1.11 Te2 Embedded in Nitrogen-Doped Carbon Nanotube for Water Splitting

A rational design is reported of Fe-doped cobalt telluride nanoparticles encapsulated in nitrogen-doped carbon nanotube frameworks (Fe-Co_1.11 Te₂ @NCNTF) by tellurization of Fe-etched ZIF-67 under a mixed H₂ /Ar atmosphere. Fe-doping was able to effectively modulate the electronic structure of Co_1.11 Te₂ , increase the reaction activity, and further improve the electrochemical performance. The optimized electrocatalyst exhibited superior hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performances in an alkaline electrolyte with low overpotentials of 107 and 297 mV with a current density of 10 mA cm^-2 , in contrast to the undoped Co_1.11 Te₂ @NCNTF (165 and 360 mV, respectively). The overall water splitting performance only required a voltage of 1.61 V to drive a current density of 10 mA cm^-2 . Density function theory (DFT) calculations indicated that the Fe-doping not only afforded abundant exposed active sites but also decreased the hydrogen binding free energy. This work provided a feasible way to study non-precious-metal catalysts for an efficient overall water splitting.

Surface vacancy on PtTe2 for promoting CO oxidation through efficiently activating O2

Platinum group metal dichalcogenides (PtTe₂) with controllable thickness have been synthesized and confirmed to be promising electric and spintronic materials. Here, using the first-principles calculations, we demonstrate the potential application of PtTe₂ as catalyst substrate. Taking CO oxidation as model reaction, the importance of surface vacancy is clarified. It is found that surface vacancy on PtTe₂ could improve the stability and catalytic activity of the supported Pt atom. The details of CO oxidation processes indicate that surface vacancy could weaken the adsorption of reactants and speed up the formation and decomposition of OOCO intermediate on Pt catalysts. The underlying mechanisms for the improved activity are unveiled through comprehensively analyzing the charge transfer, density of states, and charge density difference. We hope that the current findings were beneficial for the research and development of efficient catalysts by collocating various single atom/cluster catalysts with different platinum group metal dichalcogenides.

One-step fabrication of a self-supported Co@CoTe2 electrocatalyst for efficient and durable oxygen evolution reactions

The optimal hydrothermal synthesis of a Co@CoTe₂-240 electrode needs an overpotential of 286 mV to achieve a current density of 10 mA cm⁻² and is able to sustain galvanostatic OER electrolysis for 16 hours with little degradation of less than 20 mV.