In-situ growth of hollow NiCo layered double hydroxide on carbon substrate for flexible supercapacitor

Engineering intervention to disrupt the evolution of ZIF-67: Ultra-fast synthesis of arrayed Co(OH)2@ZIF-L in dozens of seconds for high-energy charge storage

Designing rational heterostructures of high-performance electroactive materials on conductive substrates with hierarchical structures is critical for advancing electrochemical energy storage technologies. In this study, a unique spatial structure is fabricated by vertically aligning two-dimensional (2D) structures of Co-ZIF-L on conductive nickel foam (NF) substrate through interruption of ZIF-67 formation. This is followed by an innovative electrochemical synthesis method that disrupts unstable surface coordination bonds in Co-ZIF-L, enabling the in-situ generation of Co(OH)2. The resulting Co(OH)2@ZIF-L/NF binder-free electrodes feature a hierarchical spatial structure and are synthesized in approximately 30 s. These electrodes showcase exceptional area capacity of 3.1 C cm-2 at 1 mA cm-2, attributed to their high specific surface area and layered architecture that promotes electrolyte penetration. Density Functional Theory (DFT) calculations reveal that the Co(OH)2@ZIF-L nanostructures have superior electrical conductivity compared to the individual components. Furthermore, a hybrid supercapacitor (HSC) based on Co(OH)2@ZIF-L/NF//AC exhibits an impressive energy density of 42 Wh kg-1 at a power density of 184.7 W kg-1. This research provides new insights into the efficient synthesis of high-performance electroactive materials with unique spatial structures and expands the potential applications of ZIF materials.

Hierarchical CoMn-LDH and Heterostructured Composites for Advanced Supercapacitors and Electrocatalysis Applications

In the present study, self-assembled hierarchical CoMn-LDH, CoMn@CuZnS, and CoMn@CuZnFeS heterostructured composites were synthesized for bifunctional applications. As an electrode for a supercapacitor, CoMn-LDH demonstrated superior areal and specific capacitance of 5.323 F cm-2 (279.49 mAh/g) at 4 mA cm-2, comparable to or even higher than other LDHs. The assembled AC//CoMn-LDH hybrid supercapacitor device further demonstrated better stability with 63% original capacitance over 20,000 cycles. Later, as a catalyst, CoMn-LDH, CoMn@CuZnS, and CoMn@CuZnFeS electrodes revealed better performance, with overpotentials of 340, 350, and 366 and -199, -215, and -222 mV to attain 10 mA cm-2 of current density for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. Moreover, for CoMn-LDH, small Tafel slopes of 102 and 128 mV/dec were noticed for OER and HER with good stability compared to heterostructured electrodes.

One-Step Synthesis of NiCo-LDH@Ni(OH)2 Heterostructure Foams on Biomass-Derived Porous Carbon for High-Performance Supercapacitors

Layered double hydroxides (LDHs) have attracted much attention as pseudocapacitor supercapacitor electrodes because of their high theoretical specific capacity. However, LDHs have drawbacks such as poor electrical conductivity, and their specific capacities are lower than the theoretical values. In this work, NNCLDH@OPC electrodes are constructed via in situ synthesis of heterostructure foams (NNCLDH) consisting of NiCo-LDH and Ni(OH)2 on pomelo peel-derived porous carbon (OPC) through a one-step solvothermal method using ZIF-67 as a template. Owing to the synergistic effect of the 3D nanofoam structure and the multicomponent heterostructure as well as the conductive porous carbon support, the NNCLDH/OPC exhibited ultrahigh electrochemical performance as well as excellent cycling stability: a specific capacity of 3290 F g-1 at 1 A g-1 and a capacitance retention of 77.8% after 4000 cycles at a current density of 10 A g-1. In addition, the assembled NNCLDH@OPC//OPC asymmetric supercapacitor (ASC) has a maximum energy density of 51 Wh kg-1 with a power density of 812 W kg-1 and a maximum power density of 16 kW kg-1 at a current density of 20 A g-1. These results demonstrate the significant application potential of NNCLDH/OPC composites in supercapacitor electrodes.

Laser-Induced Graphene Decorated with MOF-Derived NiCo-LDH for Highly Sensitive Non-Enzymatic Glucose Sensor

Designing and fabricating a highly sensitive non-enzymatic glucose sensor is crucial for the early detection and management of diabetes. Meanwhile, the development of innovative electrode substrates has become a key focus for addressing the growing demand for constructing flexible sensors. Here, a simple one-step laser engraving method is applied for preparing laser-induced graphene (LIG) on polyimide (PI) film, which serves as the sensor substrate. NiCo-layered double hydroxides (NiCo-LDH) are synthesized on LIG as a precursor, utilizing the zeolitic imidazolate framework (ZIF-67), and then reacted with Ni(NO3)2 via solvent-thermal methods. The sensitivity of the non-enzymatic electrochemical glucose sensor is significantly improved by employing NiCo-LDH/LIG as the sensing material. The porous and interconnected structure of NiCo-LDH, derived from ZIF-67, enhances the accessibility of electrochemically active sites, while the incorporation of LIG ensures exceptional conductivity. The combination of NiCo-LDH with LIG enables efficient electron transport, leading to an increased electrochemically active surface area and enhanced catalytic efficiency. The fabricated electrode achieves a low glucose detection limit of 0.437 μM and demonstrates a high sensitivity of 1141.2 and 631.1 μA mM-2 cm-2 within the linear ranges of 0-770 μM and 770-1970 μM, respectively. Furthermore, the NiCo-LDH/LIG glucose sensor demonstrates superior reliability and little impact from other substances. A flexible integrated LIG-based non-enzymatic glucose sensor has been developed, demonstrating high sensitivity and suggesting a promising application for LIG-based chemical sensors.

Supercapattery-Diode: Using Layered Double Hydroxide Nanosheets for Unidirectional Energy Storage

The supercapacitor-diode (CAPode) is a device that integrates the functionality of an ionic diode with that of a conventional supercapacitor. The unique combination of energy storage and rectification properties in CAPodes is relevant for iontronics, alternate current rectifiers, logic operations, grid stabilization, and even biomedical applications. Here, we propose a novel aqueous-phase supercapattery-diode with excellent energy storage [total specific capacity (CT) = 162 C g-1, energy density = 34 W h kg-1 at 1.0 A g-1] as well as rectifying properties [rectification ratio I (RRI) of 23, and rectification ratio II (RRII) of 0.98]; the unidirectional energy storage is achieved by the utilization of an ion-selective redox reaction of battery-type layered double hydroxide (LDH) nanosheets serving as the electroactive material as well as asymmetric device configuration of supercapattery-diode in the KOH electrolyte. This work expands the types of CAPodes and importantly exemplifies the significance of integrating battery-type LDH and their redox chemistry, allowing a simultaneous increase in charge storage and rectification properties.

Effect of synthesis temperature on the structural morphology of a metal-organic framework and the capacitor performance of derived cobalt-nickel layered double hydroxides

Three-dimensional interconnected nickel-cobalt layered double hydroxides (NiCo-LDHs) were prepared on nickel foam by ion exchange using a cobalt-based metal-organic framework (Co-MOF) as a template at different temperatures. The effects of the Co-MOF preparation temperature on the growth, mass, morphology, and electrochemical properties of the Co-MOF and derived NiCo-LDH samples were studied. The synthesis temperature from 30 to 50 °C gradually increased the mass of the active material and the thickness of the Co-MOF sheets grown on the nickel foam. The higher the temperature is, the larger the proportion of Co3+. β-Cobalt hydroxide (β-Co(OH)2) sheets were generated above 60 °C. The morphology and mass loading pattern of the derived flocculent layer clusters of NiCo-LDH were inherited from metal-organic frameworks (MOFs). The areal capacitance of NiCo-LDH shows an inverted U-shaped curve trend with increasing temperature. The electrode material synthesized at 50 °C had a tremendous specific capacitance of 7631 mF·cm-2 at a current density of 2 mA·cm-2. The asymmetric supercapacitor assembled with the sample and active carbon (AC) achieved an energy density of 55.0 Wh·kg-1 at a power density of 800.0 W·kg-1, demonstrating the great potential of the NiCo-LDH material for energy storage. This work presents a new strategy for designing and fabricating advanced green supercapacitor materials with large power and energy densities.

Advanced High-Energy All-Solid-State Hybrid Supercapacitor with Nickel-Cobalt-Layered Double Hydroxide Nanoflowers Supported on Jute Stick-Derived Activated Carbon Nanosheets

Developing efficient, lightweight, and durable all-solid-state supercapacitors is crucial for future energy storage systems. The study focuses on optimizing electrode materials to achieve high capacitance and stability. This study introduces a novel two-step pyrolysis process to synthesize activated carbon nanosheets from jute sticks (JAC), resulting in an optimized JAC-2 material with a high yield (≈24%) and specific surface area (≈2600 m2 g-1). Furthermore, an innovative in situ synthesis approach is employed to synthesize hybrid nanocomposites (NiCoLDH-1@JAC-2) by integrating JAC nanosheets with nickel-cobalt-layered double hydroxide nanoflowers (NiCoLDH). These nanocomposites serve as positive electrode materials and JAC-2 as the negative electrode material in all-solid-state asymmetric hybrid supercapacitors (HSCs), exhibiting remarkable performance metrics. The HSCs achieve a specific capacitance of 750 F g-1, a specific capacity of 209 mAh g-1 (at 0.5 A g-1), and an energy density of 100 Wh kg-1 (at 250 W kg-1) using PVA/KOH solid electrolyte, while maintaining outstanding cyclic stability. Importantly, a density functional theory framework is utilized to validate the experimental findings, underscoring the potential of this novel approach for enhancing HSC performance and enabling the large-scale production of transition metal-based layered double hydroxides.

Constructing a 3D Ion Transport Channel-Based CNF Composite Film with an Intercalated Structure for Superior Performance Flexible Supercapacitors

The weak stiffness, huge thickness, and low specific capacitance of commonly utilized flexible supercapacitors hinder their great electrochemical performance. Learning from a biomimetic interface strategy, we design flexible film electrodes based on functional intercalated structures with excellent electrochemical properties and mechanical flexibility. A composite film with high strength and flexibility is created using graphene (reduced graphene oxide (rGO)) as the plane layer, layered double metal hydroxide (LDH) as the support layer, and cellulose nanofiber (CNF) as the connection agent and flexible agent. The interlayer height can be adjusted by the ion concentration. The highly interconnected network enables excellent electron and ion transport channels, facilitating rapid ion diffusion and redox reactions. Moreover, the high flexibility and mechanical properties of the film achieve multiple folding and bending. The CNF-rGO-NiCoLDH film electrode exhibits high capacitance performance (3620.5 mF cm-2 at 2 mA cm-2), excellent mechanical properties, and high flexibility. Notably, flexible all-solid assembled CNF-rGO-NiCoLDH//rGO has an extremely high area energy density of 53.5 mWh cm-2 at a power density of 1071.2 mW cm-2, along with cycling stability of 89.8% retention after 10 000 charge-discharge cycles. This work provides a perspective for designing high-performance energy storage materials for flexible electronics and wearable devices.

Etching-induced ion exchange engineering of two-dimensional layered NiFeCo-based hydroxides for high energy charge storage

Efficient and rapid synthesis of transition metal-based hydroxides with tailored microstructures has emerged as a promising approach to fabricate high-performance electrode materials for energy storage devices. However, many conventional synthesis methods are cumbersome, expensive and time-consuming, and the microstructures of electrode materials are usually uncontrollable. Herein, we propose a fast and cost-effective approach to electrochemically in situ grow NiFeCo-based ternary hydroxides (NiFeCo-THs) with layered nanosheet structures on pretreated nickel foam (NF). The in situ grown NiFeCo-THs were in direct contact with the NF to form a monolithic electrode as NiFeCo/NF. By engineering the ion exchange process for controlling the ionic ratio, the monolithic Ni1(Fe/Co = 1/1)0.5/NF electrode was fabricated and found to show the optimum electrochemical behavior with a specific capacitance of 2.32 C cm-2 at 2 mA cm-2 as a result of its characteristic microstructures. Furthermore, a hybrid supercapacitor was constructed utilizing the monolithic Ni1(Fe/Co = 1/1)0.5/NF electrode and activated carbon as the cathode and anode, respectively, and it was found to have an energy density of 81.1 μW h cm-2 at a power density of 808.8 μW cm-2. After 5000 cycles, 84.0% of the initial capacitance of the hybrid supercapacitor was maintained, and the monolithic Ni1(Fe/Co = 1/1)0.5/NF electrode still retained the arrayed nanosheet structure.

Precise design and in situ synthesis of hollow Co9S8@CoNi-LDH heterostructure for high-performance supercapacitors

Layered double hydroxides (LDHs) and metal sulfides (MSs) have been widely used as promising electrode materials for supercapacitors, and the rational architectural design of MS/LDH heterogeneous structures is critical to optimize large energy storage. Herein, a precisely designed hollow Co9S8 nanotubes@CoNi-LDH nanosheet heterostructure on Ni foam, facilely prepared by an ingenious in situ strategy in this Co9S8 nanoarray was first used as the self-sacrificing template and metal source to in situ synthesize Co-ZIF-67 polyhedron to form the Co9S8@ZIF-67 heterostructure, and then Co9S8@ZIF-67 was in situ etched successfully using Ni2+ ions to form the final Co9S8@CoNi-LDH/NF core-shell nanoarray. This in situ synthetic strategy to fabricate the heterostructure is conducive to boosting the structural stability, modifying the electric structure and regulating the interfacial charge transfer. Due to the synergistic effect and tight heterogeneous interface, Co9S8@CoNi-LDH/NF displayed an outstanding capacitance of 9.65 F cm-2 at a current density of 2 mA cm-2 and excellent capacitance retention rate of 91.7% after 5000 cycles. In addition, the ASC device assembled with AC has an extremely high energy density of 1.0 mW h cm-2 at 2 mA cm-2 and maintains 96.9% capacitance retention after 5000 cycles. This work provides a skillful strategy for the precise design and in situ synthesis of MS/LDH heterostructures with fascinating features for electrochemical energy storage applications.

Road Map for In Situ Grown Binder-Free MOFs and Their Derivatives as Freestanding Electrodes for Supercapacitors

Among several electrocatalysts for energy storage purposes including supercapacitors, metal-organic frameworks (MOFs), and their derivatives have spurred wide spread interest owing to their structural merits, multifariousness with tailor-made functionalities and tunable pore sizes. The electrochemical performance of supercapacitors can be further enhanced using in situ grown MOFs and their derivatives, eliminating the role of insulating binders whose "dead mass" contribution hampers the device capability otherwise. The expulsion of binders not only ensures better adhesion of catalyst material with the current collector but also facilitates the transport of electron and electrolyte ions and remedy cycle performance deterioration with better chemical stability. This review systematically summarizes different kinds of metal-ligand combinations for in situ grown MOFs and derivatives, preparation techniques, modification strategies, properties, and charge transport mechanisms as freestanding electrode materials in determining the performance of supercapacitors. In the end, the review also highlights potential promises, challenges, and state-of-the-art advancement in the rational design of electrodes to overcome the bottlenecks and to improve the capability of MOFs in energy storage applications.

3D hollow NiCo LDH nanocages anchored on 3D CoO sea urchin-like microspheres: A novel 3D/3D structure for hybrid supercapacitor electrodes

The research on the structure of advanced electrode materials is significant in the field of supercapacitors. Herein, for the first time, we propose a novel 3D/3D composite structure by a multi-step process, in which 3D hollow NiCo LDH nanocages are immobilized on 3D sea urchin-like CoO microspheres. Results show that the 3D CoO acts as an efficient and stable channel for ion diffusion, while the hollow NiCo LDH provides abundant redox-active sites. The calculated results based on density function theory (DFT) show that the CoO@NiCo LDH heterostructure has an enhanced density of states (DOS) near the Fermi level and strong adsorption capacity for OH^-, indicating its excellent electrical conductivity and electrochemical reaction kinetics. As a result, the CoO@NiCo LDH electrode has an areal specific capacity of 4.71C cm^-2 at a current density of 3 mA cm^-2 (440.19C g^-1 at 0.28 A g^-1) and can still maintain 88.76 % of the initial capacitance after 5000 cycles. In addition, the assembled hybrid supercapacitor has an energy density of 5.59 mWh cm^-3 at 39.54 mW cm^-3.

Metal organic framework derived P-doping CoS@C with sulfide defect to boost high-performance asymmetric supercapacitors

Cobalt sulfide (CoS) is a promising battery-type material for electrochemical energy storage. However, the poor conductivity and slow charge transfer kinetics as well as the deficiency of electrochemically active sites seriously limit their applications. Herein, a class of the P-doping induced hexagonal CoS nanosheets with S defects (P-CoS_1-x) derived from Co-based metal organic frameworks (MOFs) supported on carbon nanotube film (CNT) is designed and prepared. The density functional theory (DFT) simulations show the higher conductivity of the P-CoS_1-x electrode than CoS. Taking advantage of the synergistic effects of the high conductive P-CoS nanosheets with rich S defects and the flexible CNT, the P-CoS_1-x/CNT electrode exhibits a high reversible capacity of 4.3F cm^-2, remarkable rate capability, and outstanding long-term cyclability. Impressively, the flexible asymmetric supercapacitor (ASC) based on P-CoS_1-x//CoS@PPy achieves a satisfying energy density of 0.18 mWh cm^-2 and high bending stability. The electrocatalytic result suggests that the P-CoS_1-x possesses the lowest overpotential and the smallest Tafel slope. This vacancy engineering strategy also provides a new insight into active materials and should be beneficial for the design of the next generation of energy storage devices.

Insight into the decay mechanism of cycling capacitance for layered double hydroxides at subnanometer scale

The application of layered double hydroxides (LDHs) in supercapacitors is encouraged by their high capacitances but still limited by deficient cycling stability. The remarkable capacitance decay of LDHs during cycling mainly results from the narrowing of the interlayer distance due to the interlayer anion replacement. A polymer encapsulation strategy is developed to improve the cycling stability of LDHs by inhibiting the anion exchange, opening a new avenue to develop stable LDH-based supercapacitor materials.

Polypyrrole Nanotunnels with Luminal and Abluminal Layered Double Hydroxide Nanosheets Grown on a Carbon Cloth for Energy Storage Applications

The structural design of transition metal-based electrode materials with gigantic energy storage capabilities is a crucial task. In this work, we report an assembly of thin layered double hydroxide (LDH) nanosheets arrayed throughout the luminal and abluminal parts of polypyrrole tunnels fastened onto both sides of a carbon cloth as a battery-type energy storage system. Electron microscopy images reveal that the resulting electrode (NiCo-LDH@H-PPy@CC, where H-PPy@CC represents carbon cloth-supported hollow polypyrrole fibers) is constructed by combining luminal and abluminal NiCo-LDH nanosheets onto a long polypyrrole tunnel on a carbon cloth. The primary sample shows an excellent specific capacity of 149.16 mAh g-1 at 1.0 mA cm-2, a remarkable rate capability of 80.45%, and comprehensive cyclic stability (93.4%). The improved performance is mainly attributed to the strategic organization of the electrode materials with superior Brunauer-Emmett-Teller (BET) surface area and conductivity. Moreover, an asymmetric supercapacitor device assembled with NiCo-LDH@H-PPy@CC and vanadium phosphate-incorporated carbon nanofiber (VPO@CNFs900) electrodes contributes a specific energy density of 32.42 Wh kg-1 at 3 mA cm-2 with a specific power density of 359.16 W kg-1. When the current density is increased by 6-fold, the specific power density reaches 1999.89 W kg-1 at a specific energy density of 20.06 Wh kg-1. This is a simple, cost-effective, and convenient synthetic strategy for the synthesis of porous nanosheet arrays assimilated into hollow fiber architectures, which can illuminate the ideal approach for the fabrication of novel materials with an immense potential for energy storage.

Nanosheet-assembled NiCo-LDH hollow spheres as high-performance electrodes for supercapacitors

Layered double hydroxides (LDHs) have been considered as favorable pseudocapacitive electrode materials for supercapacitors due to their tunable layered structure/compositions and low cost. Here, we report the NiCo-LDH hollow spheres prepared with Co-glycerate as the sacrificial template and cobalt source. The hollow spheres are assembled with frizzy NiCo-LDH nanosheets, where the hollow structure can inhibit agglomeration of the LDH nanosheets to expose more active sites and shorten the diffusion path of electrolyte ions. The prepared NiCo-LDH hollow spheres show a high specific capacitance of 1962 F g^-1 at 1 A g^-1 and good capacitance retention rate of 66.4 % at 30 A g^-1. The asymmetric supercapacitors fabricated using NiCo-LDH hollow spheres as positive electrode yields a large energy density 62.9 Wh kg^-1 at the power density of 0.8 kW kg^-1. This research may develop a facile synthesis way to prepare LDH hollow spheres for supercapacitors.

Controllable synthesis of NiCo layered double hydroxide sheets on laser-induced graphene as electrodes for high-performance supercapacitors

NiCo-LDH@P12-LIG electrodes are prepared using the laser-induced graphene under hydrothermal conditions, showing an areal specific capacitance of 2072 mF cm−2.

Promoting electrocatalytic overall water splitting by sulfur incorporation into CoFe-(oxy)hydroxide

The design and fabrication of highly cost-effective electrocatalysts with high activity, and stability to enhance the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been considered to be one of the most promising approaches toward overall water splitting. In this study, sulfur-incorporated cobalt-iron (oxy)hydroxide (S-(Co,Fe)OOH) nanosheets were directly grown on commercial iron foam via galvanic corrosion and hydrothermal methods. The incorporation of sulfur into (Co,Fe)OOH results in superior catalytic performance and high stability in both the HER and OER conducted in 1 M KOH. The incorporation of sulfur enhanced the electrocatalytic activity by modifying the electronic structure and chemical states of (Co,Fe)OOH. An alkaline water electrolyzer for overall water splitting was fabricated using a two-electrode configuration utilizing the S-(Co,Fe)OOH bifunctional electrocatalyst in both the HER and OER. The fabricated electrolyzer outperformed a precious metal-based electrolyzer using Pt/C as the HER electrocatalyst and IrO2 as the OER electrocatalyst, which are the benchmark catalysts. This electrolyzer provides a lower potential of 1.641 V at 10 mA cm-2 and maintains 98.4% of its performance after 50 h of durability testing. In addition, the S-(Co,Fe)OOH-based electrolyzer successfully generated hydrogen under natural illumination upon its combination with a commercial silicon solar cell and exhibited a solar to hydrogen (STH) efficiency of up to 13.0%. This study shows that S-(Co,Fe)OOH is a promising candidate for application in the future renewable energy industry due to its high cost-effectiveness, activity, and stability during overall water splitting. In addition, the combination of a commercial silicon solar cell with an alkaline water electrolyzer has great potential for the production of hydrogen.

NiCo LDH in situ derived NiCoP 3D nanoflowers coupled with a Cu3P p-n heterojunction for efficient hydrogen evolution

With the extensive consumption of non-renewable energy sources, storing solar energy as chemical energy has aroused people's wide concern. In this study, we successfully developed a novel Cu₃P@NiCoP composite photocatalyst to produce hydrogen by splitting water under visible light irradiation. Both the building of a p-n heterojunction between Cu₃P and NiCoP and the three-dimensional nanoflower structure of NiCoP play a vital role in improving the performance of the catalyst. On the one hand, the coupling of Cu₃P and NiCoP built a p-n heterojunction at the photocatalyst interface, and the heterojunction could promote the separation efficiency of photogenerated carriers and prolong the life span of charges, therefore enhancing the photocatalytic hydrogen production activity. On the other hand, the excellent catalytic performance of the photocatalyst was benefited by the flower-like microsphere structure of NiCoP, which could provide abundant active sites and a large specific surface area, and promote the adsorption of protons by the photocatalyst. Besides, the phosphating degree of the precursors and the ratio of Cu₃P and NiCoP were adjusted to get the best photocatalyst for hydrogen production, and the H₂ production of the optimal catalyst could reach 8897.44 μmol h^-1 g^-1. This work provides a new understanding for the rational design of heterojunction photocatalysts for outstanding hydrogen production performance.

Construction of a Tl(I) voltammetric sensor based on ZIF-67 nanocrystals: optimization of operational conditions via response surface design

An electroanalytical sensor was constructed constituted on a carbon paste electrode (CPE) with a ZIF-67 modifier and devoted to the quantification of Tl(I). Several characterization tests including XRD, BET, FT-IR, SEM/EDS/mapping, TEM, impedance spectroscopy (EIS), and cyclic voltammetry (CV) were performed on the synthesized ZIF-67 nanocrystals and CPE matrix. Central composite design (CCD) was used to assess the impact of variables affecting the sensor response, including the weight percent of ZIF-67 (14%), the pH of the thallium accumulation solution (6.4), and accumulation time (315 s) as well as the accumulation potential (-1.2 V). The direct linear relationship between the sensor response and the concentration of Tl(I) is in the interval of 1.0×10^-10 to 5.0×10^-7 M (coefficient of determination = 0.9994). The detection limit is approximately 1.0 × 10^-11 M. The right selection of the MOF makes this sensor highly resistant to the interference of other ions. High selectivity against common interferences in the measurement of thallium (such as Pb(II) and Cd(II)) is an important feature of this sensor. To confirm the performance of the prepared sensor, the amount of thallium in the real sample was determined.

The implementation of graphene-based aerogel in the field of supercapacitor

Graphene and graphene-based hybrid materials have emerged as an outstanding supercapacitor electrode material primarily because of their excellent surface area, high electrical conductivity, and improved thermal, mechanical, electrochemical cycling stabilities. Graphene alone exhibits electric double layer capacitance (EDLC) with low energy density and high power density. The use of aerogels in a supercapacitor is a pragmatic approach due to its extraordinary properties like ultra-lightweight, high porosity and specific surface area. The aerogels encompass a high volume of pores which leads to easy soak by the electrolyte and fast charge-discharge process. Graphene aerogels assembled into three-dimensional (3D) architecture prevent there stacking of graphene sheets and maintain the high surface area and hence excellent cycling stability and rate capacitance. However, the energy density of graphene aerogels is limited due to EDLC type of charge storage mechanism. Consequently, 3D graphene aerogel coupled with pseudocapacitive materials such as transition metal oxides, metal hydroxides, conducting polymers, nitrides, chalcogenides show an efficient energy density and power density performance due to the presence of both types of charge storage mechanisms. This laconic review focuses on the design and development of graphene-based aerogel in the field of the supercapacitor. This review is an erudite article about methods, technology and electrochemical properties of graphene aerogel.

Template-Sacrificing Synthesis of Ni-Co Layered Double Hydroxides Polyhedron as Advanced Anode for Lithium Ions Battery

The novel hollowed Ni-Co layered double hydroxide polyhedron (H-(Ni, Co)-LDHP) is synthesized via a template-sacrificing approach using ZIF-67 as template. The morphology, crystallinity, porous texture, and chemical state of H-(Ni, Co)-LDHP are examined. It demonstrates that the H-(Ni, Co)-LDHP not only provides rich redox sites but also promotes the kinetics due to presence of numerous rational channels. As a result, the H-(Ni, Co)-LDHP manifests the desirable lithium ions storage performance when employed as anode. This study paves a new way for preparing hollowed nanostructure toward advanced electrochemical applications.

The Application of a Y-Modified Lanthanum Zirconate Flexible Thin Film for a High-Performance Flexible Supercapacitor

With the rapid development of wearable electronics devices, there is increasing demand for the development of new flexible energy storage devices with high security, and this has become a hot research topic. Although flexible supercapacitors are considered to be high-performance energy-storage equipment because of their fast charging/discharging ability, long cycle life, good reliability, wide operating temperature range, and so on, there are still many drawbacks that need to be overcome. Herein, the La₂ Zr₂ O₇ (LZO) thin film is synthesized as a new energy-storage material by using a facile electrospinning method and calcination at low temperature. In addition, the mechanism of producing the flexibility of this film is determined by TG, IR, and XRD analyses. As previous studies have suggested that the charge storage of the LZO film can be attributed to the mechanism of oxygen intercalation, the Y element is doped into the LZO film to increase the concentration of oxygen vacancies. The changes in structural and electrochemical properties of La₂ Y_x Zr_2-x O₃ (0≤x≤0.5) nanofibers (LNF-x) with increasing Y content are studied carefully to obtain the best doping sample. The LNF-0.1 sample shows the highest areal capacitance of 605.3 mF cm^-2 at 2 mA cm^-2 , so a symmetrical flexible device is fabricated with LNF-0.1 electrodes. This device has a high energy density (76.7 μW h cm^-2 at 2 mW cm^-2 ), good cycling stability, and excellent mechanical flexibility. This study thus provides a new research trend for portable and wearable electronics.

The Application of Metal-Organic Frameworks and Their Derivatives for Supercapacitors

Supercapacitors (SCs), one of the most popular types of energy-storage devices, present lots of advantages, such as large power density and fast charge/discharge capability. Being the promising SCs electrode materials, metal-organic frameworks (MOFs) and their derivatives have gained ever-increasing attention due to their large specific surface area, controllable porous structure and rich diversity. Herein, the recent development of MOFs-based materials and their application in SCs as the electrode are reviewed and summarized. The preparation method, the morphology of the materials and the electrical performance of various MOFs and their derivatives (such as carbon, metal oxide/hydroxide and metal sulfide) are briefly discussed. Most of recent works concentrate on Ni-, Co- and Mn-MOFs and their composites/derivatives. Conclusions and our outlook for the researches are also given, which would be a valuable guideline for the rational design of MOFs materials for SCs in the near future.

Boosting the capacitive property of nickel cobalt aluminum layered double hydroxide in neutral electrolyte

Layered double hydroxide (LDH) has shown great potential for energy storage due to their high theoretical specific capacitance, relatively low cost and eco-friendliness. LDH, however, always works in alkali aqueous electrolyte for supercapacitors, which brings serious environmental pollution. In this work, a reduced graphite oxide/Fe(CN)₆^3-- nickel cobalt aluminum LDH (RGO/Fe(CN)₆^3--LDH) composite has been prepared via ion-exchange reaction using RGO/LDH as precursor. RGO/Fe(CN)₆^3--LDH electrode provides a specific capacitance of 221 F g^-1 in a wide potential window of -1 ~ 0.8 V vs. SCE in Na₂SO₄ aqueous electrolyte, and which is much higher than that of LDH electrode (3.56 F g^-1). Owing to the wide potential window of RGO/Fe(CN)₆^3--LDH electrode, a symmetrical solid supercapacitor device (RGO/Fe(CN)₆^3--LDH//RGO/Fe(CN)₆^3--LDH) with a high voltage of 2.0 V can deliver a high specific energy of 25.2 Wh kg^-1 at a specific power of 250 W kg^-1, and a capacitance retention of 75% after galvanostatic charging/discharging at 5 A g^-1 for 5000 times. This work supplies enlightenment for boosting the capacitive performance of LDHs in neutral electrolyte.