Interface and composition engineering of vanadium doped cobalt nickel sulfide/phosphide heterostructure for efficient water splitting

Local electronic structure engineering of vanadium-doped nickel phosphide nanosheet arrays for efficient hydrogen evolution

Local electronic structure engineering is an effective approach for optimizing the catalytic performance of electrocatalysts. Herein, a dual-phase vanadium-doped nickel phosphide (NiVxP) catalyst supported on nickel foam (NF) was synthesized via a successive hydrothermal and phosphorization process with interconnected nanosheet structures and homogeneous distributions. The catalyst's stable phase and strong adhesion to the substrate ensure good electrochemical stability. The incorporation of V effectively promotes initial H2O adsorption and H* formation, leading to a lower overpotential. As a result, the fabricated NiVxP@NF demonstrates favorable hydrogen evolution reaction (HER) activity and stability, with only 85 mV overpotential needed to reach 10 mA·cm-2 and showing no significant increase in the overpotential during the long-term 78-hour stability test.

Transition Metal Phosphides: The Rising Star of Lithium-Sulfur Battery Cathode Host

Lithium-sulfur batteries (LSBs) with ultra-high energy density (2600 W h kg-1 ) and readily available raw materials are emerging as a potential alternative device with low cost for lithium-ion batteries. However, the insulation of sulfur and the unavoidable shuttle effect leads to slow reaction kinetics of LSBs, which in turn cause various roadblocks including poor rate capability, inferior cycling stability, and low coulombic efficiency. The most effective way to solve the issues mentioned above is to rationally design and control the synthesis of the cathode host for LSBs. Transition metal phosphides (TMPs) with good electrical conductivity and dual adsorption-conversion capabilities for polysulfide (PS) are regarded as promising cathode hosts for new-generation LSBs. In this review, the main obstacles to commercializing the LSBs and the development processes of their cathode host are first elaborated. Then, the sulfur fixation principles, and synthesis methods of the TMPs are briefly summarized and the recent progress of TMPs in LSBs is reviewed in detail. Finally, a perspective on the future research directions of LSBs is provided.

Metal organic framework-derived transition metal-doped CoSx nanocage for enhanced visible light-assisted methanol electrocatalytic oxidation

Designing noble metal-free anode catalysts for visible light-assisted direct methanol fuel cells still remains a significant challenge. In this study, combining the photocatalytic and electrocatalytic properties of CoSx, a visible light-assisted methanol electrocatalytic oxidation strategy was provided. Doping engineering was employed to adjust the electronic structure of CoSx and improve their photoassisted methanol electrocatalytic oxidation activity. Using ZIF-67 as precursor, transition metal-doped CoSx (M-CoSx, M = Zn, Cu, Ni, and Cd) nanocage was synthesized by cation exchange and L-cysteine-controlled etching. Cd doping not only widens the light adsorption to the visible region but also enhances the separation efficiency of photogenerated electron-hole pairs. The electrochemical and photochemical results indicated that the strong oxidative photogenerated hole, OH˙, and O2˙- are beneficial for methanol electrocatalytic oxidation. The synergistic electrocatalytic and photocatalytic effect will be a practical strategy for improving the methanol electrocatalytic oxidation activity of noble metal-free semiconductor catalysts.

Fine-tune d-band center of cobalt vanadium oxide nanosheets by N-doping as a robust overall water splitting electrocatalyst

Developing high-activity, long-durability, and noble metal-free oxygen evolution (OER) and hydrogen evolution (HER) cocatalysts are the bottlenecks for efficient overall water splitting (OWS). Here, novel cobalt vanadium oxides doped by nitrogen were synthesized by nitriding Co2V2O7@NF precursor at 300-450 °C for OER and HER reactions. N-Co2V2O7@NF (350 °C) and N-Co2VO4/VO2@NF (400 °C) show remarkable OER and HER performance with overpotentials of 310 mV and 224 mV at high current density (100 mA cm-2). Besides, they also revealed long-term solid stability even after 170 h and 700 h of continuous performance. Furthermore, the N-Co2V2O7@NF(+)||N-Co2VO4/VO2@NF(-) OWS device possesses a cell voltage of 1.93 V at 500 mA cm-2 better than RuO2@NF(+)||Pt/C@NF(-) (2.02 V) and can operate for 60 h with almost no degradation. This extraordinary performance can be attributed to the nanosheet structure, which can maximize the exposure of active sites and accelerate the mass transfer. Moreover, density functional theory (DFT) calculations suggest that N-doping can fine-tune the d-band center and band gap to facilitate intermediate adsorption and electron motion. The method presented here can be applied in other novel N-doped electrocatalysts for the energy field.

Spherical V-doped nickel-iron LDH decorated on Ni3S2 as a high-efficiency electrocatalyst for the oxygen evolution reaction

Due to the slow reaction kinetics of the oxygen evolution reaction (OER), the electrolysis rate of water is greatly limited. Therefore, it is of great significance to study stable and efficient non-noble metal based electrocatalysts. In this paper, three-dimensional (3D) spherical V-NiFe LDH@Ni₃S₂ was developed by exquisitely decorating ultra-thin V-doped NiFe layered dihydroxide (NiFe-LDH) on Ni₃S₂ nanosheets supported by nickel foam (NF). It is worth mentioning that V-NiFe LDH@Ni₃S₂ exhibits an excellent electrocatalytic performance and only 178 mV overpotential is required in 1 M KOH to achieve a current density of 10 mA cm^-2. Long-term chronoamperometry manifests its superior electrochemical stability. The combination of NiFe LDH and conductive substrate coupling can drastically afford abundant active sites and accelerate charge transfer, and V doping can markedly regulate the electronic structure. Therefore, the activity and durability of the electrocatalysts are greatly improved. This study may provide a new strategy for the preparation of efficient OER electrocatalysts.

Highly Effective Freshwater and Seawater Electrolysis Enabled by Atomic Rh-Modulated Co-CoO Lateral Heterostructures

Atomic metal-modulated heterostructures have been evidenced as an exciting solution to develop high-performance multifunctional electrocatalyst toward water splitting. In this research, a catalyst of continuous cobalt-cobalt oxide (Co-CoO) lateral heterostructures implanted with well-dispersed rhodium (Rh) atoms and shelled over conductive porous 1D copper (Cu) nano-supports for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both freshwater and seawater under alkaline condition is proposed. It is found that synergistic effects coming from uniform Rh atoms at doping level and Co-CoO heterostructures afford rich multi-integrated active sites and excellent charge transfer, thereby effectively promoting both HER and OER activities. The material requires overpotentials of 107.3 and 137.7 mV for HER and 277.7 and 260 mV for OER to reach an output of 10 mA cm^-1 in freshwater and mimic seawater, respectively, surpassing earlier reported catalysts. Compared to a benchmark a Pt/C//RuO₂ -based two-electrode electrolyzer, a device derived from the 1D-Cu@Co-CoO/Rh on copper foam delivers comparable cell voltages of 1.62, 1.60, and 1.70 V at 10 mA cm^-2 in freshwater, mimic seawater, and natural seawater, respectively, together with robust stability. These results evidence that 1D-Cu@Co-CoO/Rh is a promising catalyst for green hydrogen generation via freshwater and seawater electrolysis applications.