A new straightforward uncalcined approach for morphology modulating to enhance the electrical capacity performance of Co-MOF

Development of MOF-derived Co3O4 microspheres composed of fiber stacks for simultaneous electrochemical detection of Pb2+ and Cu2

As an ideal transition metal oxide, Co3O4 is a P-type semiconductor with excellent electrical conductivity, non-toxicity and low cost. This work reports the successful construction of Co3O4 materials derived from metal-organic frameworks (MOFs) using a surfactant micelle template-solvothermal method. The modified electrodes are investigated for their ability to electrochemically detect Pb2+ and Cu2+ in aqueous environments. By adjusting the mass ratios of alkaline modifiers, the morphological microstructures of Co3O4-X exhibit a transition from distinctive microspheres composed of fiber stacks to rods. The results indicate that Co3O4-1(NH4F/CO(NH2)2 = 1:0) has a distinctive microsphere structure composed of stacked fibers, unlike the other two materials. Co3O4-1/GCE is used as the active material of the modified electrode, it shows the largest peak response currents to Pb2+ and Cu2+, and efficiently detects Pb2+ and Cu2+ in the aqueous environment individually and simultaneously. The linear response range of Co3O4-1/GCE for the simultaneous detection of Pb2+ and Cu2+ is 0.5-1.5 μM, with the limits of detection (LOD, S/N = 3) are 9.77 nM and 14.97 nM, respectively. The material exhibits a favorable electrochemical response, via a distinctive Co3O4-1 microsphere structure composed of stacked fibers. This structure enhances the number of active adsorption sites on the material, thereby facilitating the adsorption of heavy metal ions (HMIs). The presence of oxygen vacancies (OV) can also facilitate the adsorption of ions. The Co3O4-1/GCE electrode also exhibits excellent anti-interference ability, stability, and repeatability. This is of great practical significance for detecting Pb2+ and Cu2+ in real water samples and provides a new approach for developing high-performance metal oxide electrochemical sensors derived from MOFs.

Improved supercapacitors and water splitting performances of Anderson-type manganese(III)-polyoxomolybdate through assembly with Zn-MOF in a host-guest structure

Enhancing performance through the combination of polyoxometalates (POMs) clusters with metal-organic frameworks (MOFs) that contain various transition metals is a challenging task. In this study, we synthesized a polyoxometalate-based metal-organic framework (POMOF) named HRBNU-5 using a solvothermal method. HRBNU-5 is composed of Zn[N(C4H9)4][MnMo6O18{(OCH2)3CNH2}2]@Zn3(C9H3O6)2·6C3H7NO, which includes two components: Zn[N(C4H9)4][MnMo6O18{(OCH2)3CNH2}2]·3C3H7NO ({Zn[MnMo6]}) and Zn3(C9H3O6)2·3C3H7NO (Zn-BTC). Structural characterization confirmed the host-guest structure, with Zn-BTC encapsulating {Zn[MnMo6]}. In a three-electrode system, HRBNU-5 exhibited a specific capacitance of 851.3 F g-1 at a current density of 1 A/g and retained high stability (97.2 %) after 5000 cycles. Additionally, HRBNU-5 performed well in aqueous-symmetric/asymmetric supercapacitors (SSC/ASC) in terms of energy density and power density in a double-electrode system. Moreover, it demonstrated excellent catalytic performance in a 1.0 M KOH solution, with low overpotentials and Tafel slopes for hydrogen and oxygen evolution reactions: 177.1 mV (η10 HER), 126.9 mV dec-1 and 370.3 mV (η50 OER), 36.3 mV dec-1, respectively, surpassing its precursors and most reported studies. HRBNU-5's positive performance is attributed to its host-guest structure, high electron-transfer conductivity, and porous structure that enhances efficient mass transport. This work inspires the design of Anderson-type POMOF electrode materials with multiple active sites and a well-defined structure.

From 1D to 2D: Controllable Preparation of 2D Ni-MOFs for Supercapacitors

Controllable modulation strategies between one-dimensional (1D) and two-dimensional (2D) structures have been rarely reported for metal-organic frameworks (MOFs). Here, 1D, 1D/2D, and 2D Ni-MOFs can be facilely prepared by adjusting the ratio of Ni²⁺ and the pyromellitic acid linker. A low-dimensional structure can shorten the transmission distance, while MOFs with a high Ni²⁺ content can supply rich active sites for oxidation-reduction reactions. The 2D structure Ni-MOF with an optimized Ni²⁺/pyromellitic acid ratio presents a good performance of 1036 F g^-1 at a current density of 1 A g^-1 with a comparable rate performance of 62% at 20 A g^-1. The study may offer a facile design to control the structure of MOFs for employing in electrochemical energy storage.

Conductive Metal-Organic Frameworks for Supercapacitors

As a class of porous materials with crystal lattices, metal-organic frameworks (MOFs), featuring outstanding specific surface area, tunable functionality, and versatile structures, have attracted huge attention in the past two decades. Since the first conductive MOF is successfully synthesized in 2009, considerable progress has been achieved for the development of conductive MOFs, allowing their use in diverse applications for electrochemical energy storage. Among those applications, supercapacitors have received great interest because of their high power density, fast charging ability, and excellent cycling stability. Here, the efforts hitherto devoted to the synthesis and design of conductive MOFs and their auspicious capacitive performance are summarized. Using conductive MOFs as a unique platform medium, the electronic and molecular aspects of the energy storage mechanism in supercapacitors with MOF electrodes are discussed, highlighting the advantages and limitations to inspire new ideas for the development of conductive MOFs for supercapacitors.

Architecting Nanostructured Co-BTC@GO Composites for Supercapacitor Electrode Application

Herein, we present an innovative graphene oxide (GO)-induced strategy for synthesizing GO-based metal-organic-framework composites (Co-BTC@GO) for high-performance supercapacitors. 1,3,5-Benzene tricarboxylic acid (BTC) is used as an inexpensive organic ligand for the synthesis of composites. An optimal GO dosage was ascertained by the combined analysis of morphology characterization and electrochemical measurement. The 3D Co-BTC@GO composites display a microsphere morphology similar to that of Co-BTC, indicating the framework effect of Co-BTC on GO dispersion. The Co-BTC@GO composites own a stable interface between the electrolyte and electrodes, as well as a better charge transfer path than pristine GO and Co-BTC. A study was conducted to determine the synergistic effects and electrochemical behavior of GO content on Co-BTC. The highest energy storage performance was achieved for Co-BTC@GO 2 (GO dosage is 0.02 g). The maximum specific capacitance was 1144 F/g at 1 A/g, with an excellent rate capability. After 2000 cycles, Co-BTC@GO 2 maintains outstanding life stability of 88.1%. It is expected that this material will throw light on the development of supercapacitor electrodes that hold good electrochemical properties.

CNTs support 2D NiMOF nanosheets for asymmetric supercapacitors with high energy density

The NiMOF/CNTs composite with NiMOF nanosheets grows along the CNTs is synthesized with a one-step solvothermal method, and the NiMOF/CNTs//AC asymmetric supercapacitors provide a high energy density of 113.8 Wh kg−1 at 800.0 W kg−1.

Gas-solid phase flow synthesis of Cu-Co-1,3,5-benzenetricarboxylate for electrocatalytic oxygen evolution

Using an environmentally friendly method to produce a stable and highly catalytically active electrocatalyst for the oxygen evolution reaction (OER) is becoming increasingly urgent. Herein, a novel bimetallic metal-organic framework (MOF), specifically a copper-cobalt 1, 3, 5-benzenetricarboxylate (Cu-Co-BTC) MOF, was successfully prepared by employing the gas-solid two-phase flow (GSF) synthetic technique. The as-prepared Cu-Co-BTC with its multiple active sites afforded a current density of 10 mA cm^-2 at 239 mV for the OER in a 1 mol L^-1 KOH solution, and showed a better electrocatalytic performance than did single-metal-containing Cu-BTC and Co-BTC materials. This work provides a new idea, one involving using novel gas-solid phase reactions for the preparation of electrocatalysts in large quantities.

{BW12O40} Hybrids Modified by in Situ Synthesized Rigid Ligand with Supercapacitance and Photocatalytic Properties

Organic rigid ligand-modified polyoxometalate-based materials possess complex and diverse structures, promising electrochemical energy storage properties and outstanding photocatalytic capabilities. Hence, two new [BW₁₂O₄₀]^5-(abbreviated as {BW₁₂O₄₀})-based inorganic-organic hybrids [{Cu(en)₂(H₂O)}][{Cu(pdc)(en)}{Cu(en)₂}(BW₁₂O₄₀)]·2H₂O (1) and [{Cu^I₅(pz)₆(H₂O)₄}(BW₁₂O₄₀)] (2) (pdc = 2-picolinate, en = ethylenediamine, pz = pyrazine) were successfully synthesized through a hydrothermal method. Among them, pdc and pz were obtained by in situ transformation from 2,6-pyridinedicarboxylic acid (H₂ pydc) and 2,3-pyrazinedicarboxylic acid (H₂pzdc), respectively. In compound 1, the {BW₁₂O₄₀} clusters as an intermediate junction connect with {Cu(pdc)(en)}{Cu(en)₂} and {Cu(en)₂(H₂O)} to form monomers, which in turn form supramolecular chains, sheets, and space network via hydrogen bonding. The {BW₁₂O₄₀} clusters are packed into copper-pyrazine frameworks in compound 2, and a unique polyoxometalate-based metal organic frameworks (POMOFs) structure with a new topology of {12}₂{6.12³.14²}₂{6².12.14².18}{6².12³.16}{6}₆ is formed via covalent bonds. When used as electrode materials for supercapacitors, the values of specific capacitance are 651.56 F g^-1 for 1-GCE and 584.43 F g^-1 for 2-GCE at a current density of 2.16 A g^-1 and good cycling stability (90.94%, 94.81% of the initial capacity after 5000 cycles at 15.12 A g^-1, respectively). The kinetic analysis reveals that surface capacitance plays a major role. Furthermore, both compounds can effectively degrade Rhodamine B (RhB) and Methylene blue (MB), showing the outstanding photocatalytic performance.

Fabrication of Vertical-Standing Co-MOF Nanoarrays with 2D Parallelogram-like Morphology for Aqueous Asymmetric Electrochemical Capacitors

Metal organic frameworks (MOFs) have been considered as one of the most promising electrode materials for electrochemical capacitors due to their large specific surface area and abundant pore structure. Herein, we report a Co-MOF electrode with a vertical-standing 2D parallelogram-like nanoarray structure on a Ni foam substrate via a one-step solvothermal method. The as-prepared Co-MOF on a Ni foam electrode delivered a high area-specific capacitance of 582.0 mC cm⁻² at a current density of 2 mA cm⁻² and a good performance rate of 350.0 mC cm⁻² at 50 mA cm⁻². Moreover, an asymmetric electrochemical capacitor (AEC) device (Co-MOF on Ni foam//AC) was assembled by using the as-prepared Co-MOF on a Ni foam as the cathode and a active carbon-coated Ni foam as the anode to achieve a maximum energy density of 0.082 mW cm⁻² at a power density of 0.8 mW cm⁻², which still maintained 0.065 mW cm⁻² at a high power density of 11.94 mW cm⁻². Meanwhile, our assembled device exhibited an excellent cycling stability with a capacitance retention of nearly 100% after 1000 cycles. Therefore, this work provides a simple method to prepare MOF-based material for the application of energy storage and conversion.