Oxidative potential and chemical composition of PM2.5 in office buildings across Europe - The OFFICAIR study

The Influence of Different Protocols on the Application of the Dithiothreitol Assay in Determining the Oxidative Potential of Ambient Particles

Environmental particulate matter (PM) exposure has been widely recognized for its significant adverse effects on human health. Monitoring PM levels is one of the essential parameters of air quality assessment. However, PM mass concentration alone does not sufficiently explain its toxicological impacts and effects on health. This study highlights the importance of oxidative potential (OP) as a promising metric for evaluating PM toxicity. It focuses on standardizing the dithiothreitol (DTT) assay as a tool for OP measurement. In order to investigate the impact of various extraction techniques, reagent concentrations, and assay conditions, four previously established protocols were tested without modification, while a novel protocol was introduced based on an extensive literature review. Results revealed strong positive correlations between the new and most established protocols. These findings highlight the significance of the new protocol in advancing the development of standardized methodologies for applying the DTT assay and demonstrating its reliability and relevance. While developing a standardized DTT assay involves addressing numerous parameters-from filter extraction to assay application-this research provides a solid base for achieving consistency in OP measurements and overcoming this critical issue.

Supporting the investigation of health outcomes due to airborne emission by different approaches: current evidence for the waste incineration sector

Life cycle assessment (LCA) along with a survey on epidemiologic and oxidative potential studies was used for analysing the current evidence of the impact of airborne emissions from municipal solid waste incineration (MSWI) on human health. The correspondence among investigated health outcomes and pollutants was discussed based on the Chemical Abstract Service (CAS) and the International Agency for Research on Cancer (IARC). LCA indicated the ability of MSWI in avoiding human health impact, about - 2 × 10-4 DALY/tonne together with avoided emissions of particulate matter (PM) and resource depletion, about - 2.5 × 10-3 kg Sbeq/tonne and about - 0.11 kg PM2.5 eq/tonne, respectively. Positive emissions were detected for greenhouses (about 900 kg CO2eq/tonne) and ecotoxicity (about 15,000 CTUe/tonne). Epidemiologic studies performed on population exposed to MSWI reported quite contrasting results. In some of these, hazard ratio (HR) ranging from about 0.7 to 2.2 was reported concerning the incidence of stomach, liver, breast and bladder cancer. Larger agreement was detected concerning the incidence of larynx and lung cancer with HR ranging from about 1 to about 2.6. Direct causal nexuses were not definitively identified. Oxidative potential of PM was characterized by a high Pearson correlation > 0.8 to the presence of CrVI, Cu and Zn. These heavy metals were also identified by both CAS and IARC as toxic (i.e. Cu and Zn) and cancerous (i.e. CrVI) substances affecting the organs of both respiratory and digestive apparatus. In general, even if more research is necessary, LCA, oxidative potential and the epidemiologic survey results showed a high level of accordance. This suggests their integrated exploitation for supporting the investigation of both direct and indirect consequences on environment and health related to waste incineration for both retrospective and predictive studies.

In vitro assessment of acute airway effects from real-life mixtures of ozone-initiated oxidation products of limonene and printer exhaust

In indoor air the reaction of ozone (O3) with terpenes may lead to the formation of irritating gas-phase products which may induce acute airway effects (i.e. sudden, short-term changes or symptoms related to the respiratory system). We aimed to perform an in vitro study on possible health effects of products from the O3-initiated reaction of limonene with printer exhaust, representing real-life mixtures in offices. Human bronchial epithelial cells were exposed for 1 hour (h) to limonene and O3, combined with printer exhaust. The resulting concentrations represented 34% and 6% of the generated initial concentrations of limonene (400 µg/m³) and O3 (417 µg/cm³), respectively, which were in range of high end realistic indoor concentrations. We observed that the reaction of limonene with O3 generated an increase of ultrafine particles within 1 h, with a significant increase of secondary reaction products 4-oxopentanal and 3-isopropenyl-6-oxo-heptanal at high end indoor air levels. Simultaneous printing activity caused the additional release of micron-sized particles and a further increase in reaction products. Relevant cellular endpoints to evaluate the possible induction of acute airway effects were measured. However, none of the test atmospheres representing office air was observed to induce these effects.

Oxidative potential associated with reactive oxygen species of size-resolved particles: The important role of the specific sources

Oxidative potential (OP) is a predictor of particulate matter (PM) toxicity. Size-resolved PM and its components that influence OP values can be generated from several sources. However, There is little research have attempted to determine the PM toxicity generated from specific sources. This paper studied the OP characterization and reactive oxygen species (ROS) formation of particles from specific sources and their effects on human health. OP associated with ROS of size-resolved particles was analyzed by using dithiothreitol (DTT) method and electron paramagnetic resonance (EPR) spectroscopy technology. And OP and ROS deposition of specific source PM were calculated for health through the Multi-path particle deposition (MPPD) model. The results evidenced that the highest water-soluble OP (OPws) from traffic sources (OPm: 104.50 nmol min-1·ug-1; OPv: 160.15 nmol min-1·m-3) and the lowest from ocean sources (OPm: 22.25 nmol⋅min-1⋅ug-1; OPv: 54.16 nmol min-1·m-3). The OPws allocation in PM from different sources all have a unimodal pattern range from 0.4 to 3.2 μm. ROS (·OH) displayed the uniform trend as PM OPws, indicating that PM< 3.2 is the major contributor to adverse health impacts for size-resolved PM because of its enhanced oxidative activity compared with PM> 3.2. Furthermore, this study predicted the DTT consumption of PM were assigned to different components. Most DTT losses are attributed to the transition metals. For specific sources, transition metals dominates DTT losses, accounting for 38%-80% of DTT losses from different sources, followed by Hulis-C, accounting for 1%-10%. MPPD model calculates that over 66% of pulmonary DTT loss comes by PM< 3.2, and over 71% of pulmonary ROS generation from PM< 3.2. Among these sources of pollution, traffic emissions are the primary contributors to reactive oxygen species (ROS) in environmental particulate matter (PM). Therefore, emphasis should be placed on controlling traffic emissions, especially in coastal areas.

Variations of oxidative potential of PM2.5 in a medium-sized residential city in South Korea measured using three different chemical assays

Although it is evident that PM2.5 has serious adverse health effects, there is no consensus on what the biologically effective dose is. In this study, the intrinsic oxidative potential (OPm) and the extrinsic oxidative potential (OPv) of PM2.5 were measured using three chemical assays including dithiothreitol (DTT), ascorbic acid (AA), and reduced glutathione (GSH), along with chemical compositions of PM2.5 in South Korea. Among the three chemical assays, only OPmAA showed a statistically significant correlation with PM2.5 while OPmGSH and OPmDTT were not correlated with PM2.5 mass concentration. When the samples were categorized by PM2.5 mass concentrations, the variations in the proportion of Ni, As, Mn, Cd, Pb, and Se to PM2.5 mass closely coincided with changes in OPm across all three assays, suggesting a potential association between these elements and PM2.5 OP. Multiple linear regression analysis identified the significant PM components affecting the variability in extrinsic OPv. OPvAA was determined to be significantly influenced by EC, K+, and Ba while OC and Al were common significant factors for OPvGSH and OPvDTT. It was also found that primary OC was an important variable for OPvDTT while secondary OC significantly affected the variability of OPvGSH.

Indoor-Outdoor Oxidative Potential of PM2.5 in Wintertime Fairbanks, Alaska: Impact of Air Infiltration and Indoor Activities

The indoor air quality of a residential home during winter in Fairbanks, Alaska, was investigated and contrasted with outdoor levels. Twenty-four-hour average indoor and outdoor filter samples were collected from January 17 to February 25, 2022, in a residential area with high outdoor PM2.5 concentrations. The oxidative potential of PM2.5 was determined using the dithiothreitol-depletion assay (OPDTT). For the unoccupied house, the background indoor-to-outdoor (I/O) ratio of mass-normalized OP (OPmDTT), a measure of the intrinsic health-relevant properties of the aerosol, was less than 1 (0.53 ± 0.37), implying a loss of aerosol toxicity as air was transported indoors. This may result from transport and volatility losses driven by the large gradients in temperature (average outdoor temperature of -19°C/average indoor temperature of 21 °C) or relative humidity (average outdoor RH of 78%/average indoor RH of 11%), or both. Various indoor activities, including pellet stove use, simple cooking experiments, incense burning, and mixtures of these activities, were conducted. The experiments produced PM2.5 with a highly variable OPmDTT. PM2.5 from cooking emissions had the lowest OP values, while pellet stove PM2.5 had the highest. Correlations between volume-normalized OPDTT (OPvDTT), relevant to exposure, and indoor PM2.5 mass concentration during experiments were much lower compared to those in outdoor environments. This suggests that mass concentration alone can be a poor indicator of possible adverse effects of various indoor emissions. These findings highlight the importance of considering both the quantity of particles and sources (chemical composition), as health metrics for indoor air quality.

The biological interplay between air pollutants and miRNAs regulation in cancer

Air pollution, especially fine particulate matter (PM2.5, with an aerodynamic diameter of less than 2.5 μm), represents a risk factor for human health. Many studies, regarding cancer onset and progression, correlated with the short and/or long exposition to PM2.5. This is mainly mediated by the ability of PM2.5 to reach the pulmonary alveoli by penetrating into the blood circulation. This review recapitulates the methodologies used to study PM2.5 in cellular models and the downstream effects on the main molecular pathways implicated in cancer. We report a set of data from the literature, that describe the involvement of miRNAs or long noncoding RNAs on the main biological processes involved in oxidative stress, inflammation, autophagy (PI3K), cell proliferation (NFkB, STAT3), and EMT (Notch, AKT, Wnt/β-catenin) pathways. microRNAs, as well as gene expression profile, responds to air pollution environment modulating some key genes involved in epigenetic modification or in key mediators of the biological processes described below. In this review, we provide some scientific evidences about the thigh correlation between miRNAs dysregulation, PM2.5 exposition, and gene pathways involved in cancer progression.

Construction and evaluation of hourly average indoor PM2.5 concentration prediction models based on multiple types of places

Background

People usually spend most of their time indoors, so indoor fine particulate matter (PM2.5) concentrations are crucial for refining individual PM2.5 exposure evaluation. The development of indoor PM2.5 concentration prediction models is essential for the health risk assessment of PM2.5 in epidemiological studies involving large populations.

Methods

In this study, based on the monitoring data of multiple types of places, the classical multiple linear regression (MLR) method and random forest regression (RFR) algorithm of machine learning were used to develop hourly average indoor PM2.5 concentration prediction models. Indoor PM2.5 concentration data, which included 11,712 records from five types of places, were obtained by on-site monitoring. Moreover, the potential predictor variable data were derived from outdoor monitoring stations and meteorological databases. A ten-fold cross-validation was conducted to examine the performance of all proposed models.

Results

The final predictor variables incorporated in the MLR model were outdoor PM2.5 concentration, type of place, season, wind direction, surface wind speed, hour, precipitation, air pressure, and relative humidity. The ten-fold cross-validation results indicated that both models constructed had good predictive performance, with the determination coefficients (R2) of RFR and MLR were 72.20 and 60.35%, respectively. Generally, the RFR model had better predictive performance than the MLR model (RFR model developed using the same predictor variables as the MLR model, R2 = 71.86%). In terms of predictors, the importance results of predictor variables for both types of models suggested that outdoor PM2.5 concentration, type of place, season, hour, wind direction, and surface wind speed were the most important predictor variables.

Conclusion

In this research, hourly average indoor PM2.5 concentration prediction models based on multiple types of places were developed for the first time. Both the MLR and RFR models based on easily accessible indicators displayed promising predictive performance, in which the machine learning domain RFR model outperformed the classical MLR model, and this result suggests the potential application of RFR algorithms for indoor air pollutant concentration prediction.

Mechanisms of Biochanin A Alleviating PM2.5 Organic Extracts-Induced EMT of A549 Cells through the PI3K/Akt Pathway

Epithelial-mesenchymal transition (EMT) is an important step in tumor progression, which enables tumor cells to acquire migration and invasion characteristics. The aim of this study was to investigate the mechanism of biological biochanin A (BCA) in ameliorating fine particulate matter (PM2.5) lung injury. The results showed that PM2.5 could induce spindle-like changes in cell morphology, causing the ability of migration and invasion. However, they were significantly inhibited by BCA treatment (10/20/30 μm). After BCA treatment, the release and transcription of chemokine CXCL12 and its receptor gene CXCR4 were inhibited, and the release of growth inducer TGF-β1 was significantly reduced. In addition, BCA promoted the transcription of E-cadherin and β-catenin, inhibiting the expression of N-cadherin, vimentin, and fibronectin, and down-regulated the expression of MMP-2/9. We found that BCA effectively interfered with the PI3K/Akt signaling pathway activated by PM2.5. In conclusion, PM2.5 can induce EMT in lung cancer cells, and BCA may reverse this process by activating the PI3K/Akt signaling pathway.

Particulate Matter Concentration in Selected Facilities as an Indicator of Exposure to Their Service Activities

In recent years, the correlation between the concentration of pollutants in the atmosphere and inside buildings has been reported as high. The air inside living quarters and public utility buildings or the interiors of public transport vehicles, as well as the relationship between the internal and external sources of particulate matter (PM) and gaseous pollutants, have underwent sufficient research. On the other hand, non-production rooms, i.e., offices, restaurants, beauty salons, etc. remain very poorly recognized in this respect. For the above reasons, the aim of this work is to determine the difference in the total dust (TSP) and respirable PM (PM4) concentrations in selected rooms, i.e., offices and beauty centers, in relation to their outdoor concentrations. They were measured at six locations in accordance with the standard for the conditions at workplaces by means of PM aspirators. Indoor concentrations of TSP and PM4 were much higher than those in the external surroundings of the facilities. There were no significant relationships between the TSP and PM4 concentrations inside and outside tested rooms. Although the characteristic of the internal PM essentially depends on the characteristics of the external PM migrating to the interior of the premises, considering some types of non-production premises, internal emissions fundamentally changed the characteristics of PM.

Investigation of indoor air quality in university libraries in terms of gaseous and particulate pollutants in Bartin, Turkey

Indoor air quality (IAQ) was investigated in two libraries of Bartin University. Particle matter, TVOC, and CH₂O were measured simultaneously in different rooms of the libraries. Measurements were made by PCE-RCM 11 measuring device. They were conducted monthly between September 2019 and October 2020 for 2 weeks for each library. TVOC mean concentration was higher than the limit value reported by Seifert et al. (1999). PM_2.5 and PM₁₀ concentrations were higher in winter unlike TVOC and CH₂O concentrations. The indoor seconder blowing dust was detected to be the most important source of particulate matter in the indoor environment. On the other hand, it was thought that the pollutants in the gas phase were affected by indoor and outdoor air temperature, indoor/outdoor air exchange rate, and indoor/outdoor pollutant sources. The parameters changed during the day and in different rooms of the libraries. Pollutants did not pose any hazard on human health, since the calculated HQ and HI ≤ 1 for both exposure groups. The indoor air of the libraries was detected to be slightly polluted and bad according to the IAQI and IEI, respectively. On the other hand, the indoor air quality of the libraries was good in terms of all parameters according to the IAQC.

Environmental and human health impact of different powertrain passenger cars in a life cycle perspective. A focus on health risk and oxidative potential of particulate matter components

Different powertrains passenger cars, homologate in compliance with Euro 6 standard, were compared in a life cycle perspective for assessing both environmental and human health impacts. For this latter aspect, some correlation between the emission of heavy metals, elemental carbon, organic carbon, the oxidative potential of particulate matter and the adverse effect on human health were also analyzed and discussed. Battery electric vehicle (BEV) showed the lower greenhouse gases emissions, from 0.1 kgCO_2eq/km to 0.2 kgCO_2eq/km but were charged by the higher emissions of freshwater eutrophication and freshwater ecotoxicity, about 6 × 10^-6 kgP_eq/km and 4 CTUe/km, respectively. Lower resource depletion was detected for cars powered by internal combustion and hybrid powertrains. Amount of particulate matter (PM) emitted resulted lower for petrol-hybrid electric vehicles (Petrol-HEV), of about 5 × 10^-5 kgPM_2.5eq/km. BEV were charged by the higher values of human toxicity cancer, from about 2 × 10^-5 CTU_h/km to about 5 × 10^-5 CTU_h/km whereas Petrol-HEV were credited by the lower impact on human health (DALY/km). The large contribution to PM emission from all the analyzed cars was from tyre and brake wear. Main PM components were elemental (ElC) and organic carbon (OC) compounds. ElC is also a specific marker of PM emitted from traffic. Both ElC and OC were characterized by a strong correlation with the oxidative potential of PM, indicating a threat for human respiratory tract only marginally decreased by the transition from conventional to electric poweretrains vehicles.

Indoor concentrations of PM2.5 and associated water-soluble and labile heavy metal fractions in workplaces: implications for inhalation health risk assessment

PM2.5 (i.e., particles with aerodynamic diameters less than 2.5 μm) and the associated water-soluble, dissolved, and labile fractions of heavy metals (Cu, Pb, Mn, Ni, Co, Zn, Cr, and Cd) were determined in indoor air of twenty workplaces in Alexandroupolis (Northeastern Greece). PM2.5 concentrations exhibited significant variance across the workplaces ranging from 11.5 μg m-3 up to 276 μg m-3. The water-soluble metal concentrations varied between 0.67 ± 2.52 ng m-3 for Co and 27.8 ± 19.1 ng m-3 for Ni exhibiting large variations among the different workplaces. The water-soluble metal fractions were further treated to obtain the labile metal fraction (by binding with Chelex 100-chelating resin) that might represent a higher potential for bioaccessibility than the total water-soluble fraction. The largest labile (chelexed) fractions (48-67% of the corresponding water-soluble concentrations) were found for Cd, Mn, Cu, and Ni, while the labile fractions of Pb, Cr, Co, and Zn were relatively lower (34-42% of the corresponding water-soluble concentrations). Water-soluble and labile concentrations of heavy metals were further used to calculate cancer and non-cancer risks via inhalation of the PM2.5-bound metals. To our knowledge, this is the first study estimating the health risks due to the inhalation of water-soluble and labile metal fractions bound to indoor PM.

The Effects of Ventilation and Filtration on Indoor PM2.5 in Office Buildings in Four Countries

Fine particulate matter (PM2.5) is an airborne pollutant associated with negative acute and chronic human health outcomes. Although the majority of PM2.5 research has focused on outdoor exposures, people spend the majority of their time indoors, where PM2.5 of outdoor origin can penetrate. In this work, we measured indoor PM2.5 continuously for one year in 37 urban commercial offices with mechanical or mixed-mode ventilation in China, India, the United Kingdom, and the United States. We found that indoor PM2.5 concentrations were generally higher when and where outdoor PM2.5 was elevated. In India and China, mean workday indoor PM2.5 levels exceeded the World Health Organization's 24-hour exposure guideline of 25 µg/m3 about 17% and 27% of the time, respectively. Our statistical models found evidence that the operation of mechanical ventilation systems could mitigate the intrusion of outdoor PM2.5: during standard work hours, a 10 µg/m3 increase in outdoor PM2.5 was associated with 19.9% increase in the expected concentration of indoor PM2.5 (p<0.0001), compared to a larger 23.4% increase during non-work hours (p<0.0001). Finally, our models found that using filters with ratings of MERV 13-14 or MERV 15+ was associated with a 30.9% (95% CI: -55.0%, +6.2%) or 39.4% (95% CI: -62.0%, -3.4%) reduction of indoor PM2.5, respectively, compared to filters with lower MERV 7-12 ratings. Our results demonstrate the potential efficacy of mechanical ventilation with efficient filtration as a public health strategy to protect workers from PM2.5 exposure, particularly where outdoor levels of PM2.5 are elevated.

Exposure interval to ambient fine particulate matter (PM2.5) collected in Southwest China induced pulmonary damage through the Janus tyrosine protein kinase-2/signal transducer and activator of transcription-3 signaling pathway both in vivo and in vitro

PM2.5 is a well-known air pollutant threatening public health. Studies confirmed that exposure to the particles could impair pulmonary function, cause chronic obstructive pulmonary disease, and increase the incidence of lung cancer. The characteristic of PM2.5 varies across regions. The toxic function of PM2.5 in southwest China remains to be elucidated. This study aimed to investigate lung injury and its mechanisms induced by PM2.5 collected in Chengdu. Rats were administered with PM2.5 by intratracheal instillation for 4 weeks. Biochemical, cell count, and inflammation-related parameters were measured. Lung tissues were obtained for hematoxylin and eosin and Masson's trichrome staining. The expression levels of vascular endothelial growth factor (VEGF), Janus tyrosine protein kinase-2 (JAK-2), and signal transducer and activator of transcription-3 (STAT-3) were detected by immunohistochemistry assays. Meanwhile, A549 cells were treated with the PM2.5. The cell cycle, and apoptosis were measured by flow cytometry. mRNA and protein expressions of JAK-2, STAT-3, p-STAT-3, and VEGFA were detected using qPCR and Western blot analysis respectively. Results of in vivo study showed that PM2.5 induced lung pathological injury, aggravated the accumulation of inflammatory cells, and increased the serum levels of inflammatory factors. In vitro experiments showed that PM2.5 disrupted the cell growth cycle and increased cell apoptosis through the activation of the JAK-2/STAT-3 signaling pathway. Taken together, this study provided convincing experimental evidence that PM2.5 collected in southwest China could induce pulmonary injury as manifested by inflammatory response and lung fibrosis, possibly through the modulation of the JAK-2/STAT-3 signaling pathway.

Polycyclic aromatic hydrocarbon exposure, oxidative potential in dust, and their relationships to oxidative stress in human body: A case study in the indoor environment of Guangzhou, South China

A comparative study of internal and external exposure is a good method to comprehensively understand human exposure to environmental contaminants that may trigger oxidative stress in human body. Information is limited regarding the influences of reactive oxygen species (ROS) on human health from the environment. In addition, data on the contribution of polycyclic aromatic hydrocarbons (PAHs) from indoor environments, especially air, to total human exposure are still insufficient. The present study measured PAHs in paired indoor dust (n = 101), gas (polyurethane foams, n = 100), and particle samples (quartz fiber filters, n = 100) and their hydroxy metabolites (OH-PAHs) in 205 urine samples from 101 families in Guangzhou, South China. The oxidative potential (OP) in dust samples was quantified with a dithiothreitol (DTT) assay to reflect the oxidizability of ROSs, and explore the relationship between environmental ROSs and oxidative stress in humans (using urinary 8-hydroxy-2'-deoxyguanosine (8-OHdG) as a biomarker). The estimated daily intakes (EDIs) of Σ₁₆PAH via air inhalation were much higher than those from gas dermal contact, dust dermal contact, and dust ingestion (mean: 19.5 > 4.27 > 3.75 > 1.60 ng/kg_bw/day). Generally, approximately 16% of naphthalene, 28% of fluorene, 9% of phenanthrene, and 3% of pyrene were derived from indoor environments for all residents when compared with the total PAH exposure amount from all sources. Significantly positive relationships were found between OH-PAHs and 8-OHdG (coefficients β: 0.129-0.366, p < 0.05) checked by linear mixed effect models, and males seemed to be more susceptible than females to the DNA oxidative damage related to PAH exposure. The mean OP value in dust was 7.14 ± 6.68 pmol/(min·μg). Individual PAHs in dust gradually intensified the oxidizability of dust particles as their molecular weight increased. A potential but not significant dose-relationship was found between dusty OP and urinary 8-OHdG. Further work should determine the impact of chemical profiles on OP in different environmental media and continuously explore the potential to use OP as a useful indicator to reflect the total oxidizability of several groups of environmental pollutants.

Vulnerability and Burden of All-Cause Mortality Associated with Particulate Air Pollution during COVID-19 Pandemic: A Nationwide Observed Study in Italy

BACKGROUND

Limited evidence is available on the health effects of particulate matter (PM including PM2.5 with an aerodynamic diameter ≤ 2.5 μm; PM10, ≤ 10 μm; PM2.5-10, 2.5-10 μm) during the pandemic of COVID-19 in Italy. The aims of the study were to examine the associations between all-cause mortality and PM in the pandemic period and compare them to the normal periods (2015-2019).

METHODS

We collected daily data regarding all-cause mortality (stratified by age and gender), and PM concentrations for 107 Italian provinces from 1 January 2015 to 31 May 2020. A time-stratified case-cross design with the distributed lag non-linear model was used to examine the association between PM and all-cause mortality. We also compared the counts and fractions of death attributable to PM in two periods.

RESULTS

Italy saw an increase in daily death counts while slight decreases in PM concentrations in pandemic period. Each 10 µg/m3 increase in PM was associated with much higher increase in daily all-cause mortality during the pandemic period compared to the same months during 2015-2019 (increased mortality rate: 7.24% (95%CI: 4.84%, 9.70%) versus 1.69% (95%CI: 1.12%, 2.25%) for PM2.5; 3.45% (95%CI: 2.58%, 4.34%) versus 1.11% (95%CI: 0.79%, 1.42%) for PM10; 4.25% (95%CI: 2.99%, 5.52%) versus 1.76% (95%CI: 1.14%, 2.38%) for PM2.5-10). The counts and fractions of deaths attributable to PM were higher in 2020 for PM2.5 (attributable death counts: 20,062 versus 3927 per year in 2015-2019; attributable fractions: 10.2% versus 2.4%), PM10 (15,112 versus 3999; 7.7% versus 2.5%), and PM2.5-10 (7193 versus 2303; 3.7% versus 1.4%).

CONCLUSION

COVID-19 pandemic increased the vulnerability and excess cases of all-cause mortality associated with short-term exposure to PM2.5, PM2.5-10, and PM10 in Italy, despite a decline in air pollution level.

Association of subjective health symptoms with indoor air quality in European office buildings: The OFFICAIR project

The aim of this study was to explore the association between the building-related occupants' reported health symptoms and the indoor pollutant concentrations in a sample of 148 office rooms, within the framework of the European OFFICAIR research project. A large field campaign was performed in 37 office buildings among eight countries, which included (a) 5-day air sampling of volatile organic compounds (VOCs), aldehydes, ozone, and NO₂ (b) collection of information from 1299 participants regarding their personal characteristics and health perception at workplace using online questionnaires. Stepwise and multilevel logistic regressions were applied to investigate associations between health symptoms and pollutant concentrations considering personal characteristics as confounders. Occupants of offices with higher pollutant concentrations were more likely to report health symptoms. Among the studied VOCs, xylenes were associated with general (such as headache and tiredness) and skin symptoms, ethylbenzene with eye irritation and respiratory symptoms, a-pinene with respiratory and heart symptoms, d-limonene with general symptoms, and styrene with skin symptoms. Among aldehydes, formaldehyde was associated with respiratory and general symptoms, acrolein with respiratory symptoms, propionaldehyde with respiratory, general, and heart symptoms, and hexanal with general SBS. Ozone was associated with almost all symptom groups.

Seasonal Variations in the Chemical Composition of Indoor and Outdoor PM10 in University Classrooms

In the VIEPI project (Integrated evaluation of the exposure to indoor particulate matter) framework, we carried out a 1-year study of the concentration and chemical composition of particulate matter (PM) in a 5 story building in the Sapienza University of Rome (Italy). Each sampling had a duration of 1 month and was carried out indoors and outdoors in six classrooms. The chemical analyses were grouped to obtain information about the main PM sources. Micro-elements in their soluble and insoluble fractions were used to trace additional sources. Indoor PM composition was dominated by soil components and, to a lesser extent, by the organics, which substantially increased when people crowded the sites. The penetration of PM components was regulated by their chemical nature and by the dimensions of the particles in which they were contained. For the first time in crowded indoor environments, three different chemical assays aimed to determine PM redox properties complemented chemical composition measurements. These preliminary tests showed that substantially different redox properties characterised atmospheric particles in indoor and outdoor sites. The innovative characteristics of this study (time duration, number of considered environments) were essential to obtain relevant information about PM composition and sources in indoor academic environments and the occupants’ role.

Genotoxicity induced in vitro by water-soluble indoor PM2.5 fractions in relation to heavy metal concentrations

The aim of the present study was to examine the genotoxicity induced by water-soluble fractions of particulate matter (PM) and its potential relation with heavy metals. For this purpose, the genotoxicity induced on human peripheral lymphocytes by water-soluble PM_2.5 (particles with aerodynamic diameter ≤ 2.5 μm) collected from the indoor air of various workplaces in Greece (n = 20), was examined by the Sister Chromatid Exchange (SCE) induction assay and assessed in relation to the concentrations of the heavy metals Cu, Pb, Mn, Ni, Co, Zn, Cr, and Cd. The number of SCEs per metaphase (SCEs/metaphase), as an indicator of genotoxicity, the proliferation rate index (PRI), as an indicator of cytostaticity, and the mitotic index (MI), as an indicator of cytotoxicity, were measured and assessed in three water-soluble fractions of PM_2.5: the total water-soluble fraction WS_A (filtered through 0.45 μm), the dissolved fraction WS_B (filtered through 0.22 μm), and the non-chelexed dissolved fraction WS_C (filtered through Chelex-100 resin). Results showed statistically significant number of SCEs/metaphase in all water-soluble PM_2.5 fractions in relation to the control with large variabilities across the workplaces as a result of variations in indoor conditions, sources, and/or activities. The concentrations of genotoxicity were evaluated in terms of mass-normalized genotoxicity (SCEs/mg PM_2.5), that represents the genotoxic potency of particles, and air volume-normalized genotoxicity (SCEs/m³ air), that reflects the inhalation risk for people working or spending much time in these microenvironments. Correlation and linear regression analyses were further employed in order to investigate the potential relationships between genotoxicity and the water-soluble concentrations of PM_2.5-bounded heavy metals. According to the results, the highest mass-normalized genotoxicity values were found for PM_2.5 from the photocopying center, whereas the highest air volume-normalized genotoxicity was found in tavern-2. Significant positive correlations between the genotoxicity and water-soluble metals were derived, highlighting the role that heavy metals play in the genotoxicity of indoor PM_2.5. Among the targeted metals, Zn and Pb were found to be good predictors of the genotoxicity of water-soluble PM_2.5.

MicroRNAs and Their Influence on the ZEB Family: Mechanistic Aspects and Therapeutic Applications in Cancer Therapy

Molecular signaling pathways involved in cancer have been intensively studied due to their crucial role in cancer cell growth and dissemination. Among them, zinc finger E-box binding homeobox-1 (ZEB1) and -2 (ZEB2) are molecules that play vital roles in signaling pathways to ensure the survival of tumor cells, particularly through enhancing cell proliferation, promoting cell migration and invasion, and triggering drug resistance. Importantly, ZEB proteins are regulated by microRNAs (miRs). In this review, we demonstrate the impact that miRs have on cancer therapy, through their targeting of ZEB proteins. MiRs are able to act as onco-suppressor factors and inhibit the malignancy of tumor cells through ZEB1/2 down-regulation. This can lead to an inhibition of epithelial-mesenchymal transition (EMT) mechanism, therefore reducing metastasis. Additionally, miRs are able to inhibit ZEB1/2-mediated drug resistance and immunosuppression. Additionally, we explore the upstream modulators of miRs such as long non-coding RNAs (lncRNAs) and circular RNAs (circRNAs), as these regulators can influence the inhibitory effect of miRs on ZEB proteins and cancer progression.

PM2.5 and ozone in office environments and their potential impact on human health

It is important to have good indoor air quality, especially in indoor office environments, in order to enhance productivity and maintain good work performance. This study investigated the effects of indoor office activities on particulate matter of less than 2.5 μm (PM_2.5) and ozone (O₃) concentrations, assessing their potential impact on human health. Measurements of indoor PM_2.5 and O₃ concentrations were taken every 24 h during the working days in five office environments located in a semi-urban area. As a comparison, the outdoor concentrations were derived from the nearest Continuous Air Quality Monitoring Station. The results showed that the average 24 h of indoor and outdoor PM_2.5 concentrations were 3.24 ± 0.82 μg m^-3 and 17.4 ± 3.58 μg m^-3 respectively, while for O₃ they were 4.75 ± 4.52 ppb and 21.5 ± 5.22 ppb respectively. During working hours, the range of PM_2.5 concentrations were 1.00 μg m^-3 to 6.10 μg m^-3 while for O₃ they were 0.10 ppb to 38.0 ppb. The indoor to outdoor ratio (I/O) for PM_2.5 and O₃ was <1, thus indicating a low infiltration of outdoor sources. The value of the hazard quotient (HQ) for all sampling buildings was <1 for both chronic and acute exposures, indicating that the non-carcinogenic risks are negligible. Higher total cancer risk (CR) value for outdoors (2.67E-03) was observed compared to indoors (4.95E-04) under chronic exposure while the CR value for acute exposure exceeded 1.0E-04, thus suggesting a carcinogenic PM_2.5 risk for both the indoor and outdoor environments. The results of this study suggest that office activities, such as printing and photocopying, affect indoor O₃ concentrations while PM_2.5 concentrations are impacted by indoor-related contributions.

Ambient particulate matter oxidative potential: Chemical determinants, associated health effects, and strategies for risk management

Exposure to ambient air pollution has an adverse influence on human health. There is increasing evidence that oxidative potential (OP), the capacity of airborne pollutants to oxidize target molecules by generating redox oxidizing species, is a plausible metric for particulate matter (PM) toxicity. Here we describe the commonly used acellular techniques for measuring OP (respiratory tract lining fluid, dithiothreitol, ascorbic acid, and electron paramagnetic resonance assays) and review the PM chemical constituents that have been identified to drive the OP response. We further perform a review of the epidemiologic literature to identify studies that reported an association between exposure to ambient PM and a health outcome in a human population, and in which exposure was measured by both PM mass concentration and OP. Laboratory studies have shown that specific redox-active metals and quinones are able to contribute OP directly. However, interactions among PM species may alter the redox properties of PM components. In ambient PM measurements, all OP assays were found to be correlated with metals (Fe, Cu) and organic species (photochemically aged organics). Across the epidemiological studies reviewed, associations between fine PM (PM_2.5) mass and cardio-respiratory outcomes were found to be stronger at elevated OP levels but findings varied across the different OP measurement techniques. Future work should aim to identify specific situations in which PM OP can improve air pollution exposure assessment and/or risk management. This may be particularly useful in countries with low PM_2.5 mass concentrations over broad spatial scales where such information may greatly improve the efficiency of risk management activities.

Analysis of model PM2.5-induced inflammation and cytotoxicity by the combination of a virtual carbon nanoparticle library and computational modeling

Health risks induced by PM2.5 have become one of the major concerns among living populations, especially in regions facing serious pollution such as China and India. Furthermore, the composition of PM2.5 is complex and it also varies with time and locations. To facilitate our understanding of PM2.5-induced toxicity, a predictive modeling framework was developed in the present study. The core of this study was 1) to construct a virtual carbon nanoparticle library based on the experimental data to simulate the PM2.5 structures; 2) to quantify the nanoparticle structures by novel nanodescriptors; and 3) to perform computational modeling for critical toxicity endpoints. The virtual carbon nanoparticle library was developed to represent the nanostructures of 20 carbon nanoparticles, which were synthesized to simulate PM2.5 structures and tested for potential health risks. Based on the calculated nanodescriptors from virtual carbon nanoparticles, quantitative nanostructure-activity relationship (QNAR) models were developed to predict cytotoxicity and four different inflammatory responses induced by model PM2.5. The high predictability (R2 > 0.65 for leave-one-out validations) of the resulted consensus models indicated that this approach could be a universal tool to predict and analyze the potential toxicity of model PM2.5, ultimately understanding and evaluating the ambient PM2.5-induced toxicity.

Indoor gaseous air pollutants determinants in office buildings-The OFFICAIR project

The aim of this study was to identify determinants of aldehyde and volatile organic compound (VOC) indoor air concentrations in a sample of more than 140 office rooms, in the framework of the European OFFICAIR research project. A large field campaign was performed, which included (a) the air sampling of aldehydes and VOCs in 37 newly built or recently retrofitted office buildings across 8 European countries in summer and winter and (b) the collection of information on building and offices' characteristics using checklists. Linear mixed models for repeated measurements were applied to identify the main factors affecting the measured concentrations of selected indoor air pollutants (IAPs). Several associations between aldehydes and VOCs concentrations and buildings' structural characteristic or occupants' activity patterns were identified. The aldehyde and VOC determinants in office buildings include building and furnishing materials, indoor climate characteristics (room temperature and relative humidity), the use of consumer products (eg, cleaning and personal care products, office equipment), as well as the presence of outdoor sources in the proximity of the buildings (ie, vehicular traffic). Results also showed that determinants of indoor air concentrations varied considerably among different type of pollutants.

Investigation of the PM2.5, NO2 and O3 I/O ratios for office and school microenvironments

Differentiation of the exposure to PM_2.5 (particulate matter less than 2.5 μm in aerodynamic diameter), NO₂ and O₃ i.e. pollutants of outdoor origin, due to the occupation of office and school microenvironments, was investigated through the quantification of the respective Indoor to Outdoor (I/O) ratios, in simple statistical terms. For that cause, indoor and outdoor observation data were retrieved from the HEALS EDMS database, and more specifically the data from the OFFICAIR and the SINPHONIE EU projects. The I/O ratios were produced and were statistically analyzed in order to be able to study the influence of the indoor environment against the pollutants coming from outdoors. The present statistical approach highlighted also the differences of I/O ratios between the two studied microenvironments for each pollutant. For exposure estimation to the above-mentioned pollutants, the probability and cumulative distribution function (pdf/cdf) empirical approximations led to the conclusion that for offices the I/O ratios of PM_2.5 follow a normal distribution, while NO₂ and O₃ a gamma distribution. Respectively, for schools the I/O ratios of all pollutants follow a lognormal distribution.

Seasonal Variations and Chemical Predictors of Oxidative Potential (OP) of Particulate Matter (PM), for Seven Urban French Sites

Epidemiological studies suggest that the main part of chronic effects from air pollution is likely to be linked with particulate matter (PM). Oxidative potential (OP) of PM is gaining strong interest as a promising health exposure metric. This study combined atmospheric detailed composition results obtained for seven different urban background environments over France to examine any possible common feature in OP seasonal variations obtained using two assays (acid ascorbic (AA) and dithiothreitol (DTT)) along a large set of samples ( N > 700 ). A remarkable homogeneity in annual cycles was observed with a higher OP activity in wintertime at all investigated sites. Univariate correlations were used to link the concentrations of some major chemical components of PM and their OP. Four PM components were identified as OP predictors: OC, EC, monosaccharides and Cu. These species are notably emitted by road transport and biomass burning, targeting main sources probably responsible for the measured OP activity. The results obtained confirm that the relationship between OP and atmospheric pollutants is assay- and location-dependent and, thus, the strong need for a standardized test, or set of tests, for further regulation purposes.

Review of PM Oxidative Potential Measured with Acellular Assays in Urban and Rural Sites across Italy

This work is an overview of the oxidative potential (OP) values up to date measured in Italy, with the aim to provide a picture of the spatial and seasonal variability of OP in the various geographical areas across Italy. The summarized works used the common acellular assays-based dithiothreitol (OPDTT), ascorbic acid (OPAA), glutathione (OPGSH), and 2',7'-dichlorodfluorescein (OPDCFH) assays. The paper describes the association of OP responses with PM chemical composition, the sensitivity of various acellular OP assays to PM components and emission sources, and PM size distribution of the measured OP values. Our synthesis indicates that crustal and transition metals (e.g., Fe, Ni, Cu, Cr, Mn, Zn, and V), secondary ions and carbonaceous components (elemental carbon, EC, organic carbon, OC and water soluble carbon, WSOC) show significant correlations with OP across different urban and rural areas and size ranges. These chemical species are mainly associated with various PM sources, including residual/fuel oil combustion, traffic emissions, and secondary organic aerosol formation. Although the OP assays are sensitive to the same redox-active species, they differ in the association with PM chemical components. The DDT assay is mainly sensitive to the organic compounds that are mostly accumulated in the fine PM fraction, i.e., tracers of burning sources, and redox active organics associated with other markers of photochemical aging. In contrast, OPAA and OPGSH were mostly responsive to metals, mainly those related to non-exhaust traffic emissions (Cu, Zn, Cr, Fe, Ni, Mn, Sn, Cd, Pb), that are mainly accumulated in the coarse PM. Among the investigated sites, our synthesis shows larger OP values in Trentino region and the Po Valley, that may be explained by the high density of anthropogenic sources, and the orographic and meteorological characteristics, that favor the pollutants accumulation and aerosol photo-oxidative aging.

The Use of the Internet of Things for Estimating Personal Pollution Exposure

This paper proposes a framework for an Air Quality Decision Support System (AQDSS), and as a proof of concept, develops an Internet of Things (IoT) application based on this framework. This application was assessed by means of a case study in the City of Madrid. We employed different sensors and combined outdoor and indoor data with spatiotemporal activity patterns to estimate the Personal Air Pollution Exposure (PAPE) of an individual. This pilot case study presents evidence that PAPE can be estimated by employing indoor air quality monitors and e-beacon technology that have not previously been used in similar studies and have the advantages of being low-cost and unobtrusive to the individual. In future work, our IoT application can be extended to include prediction models, enabling dynamic feedback about PAPE risks. Furthermore, PAPE data from this type of application could be useful for air quality policy development as well as in epidemiological studies that explore the effects of air pollution on certain diseases.

Personal Control of the Indoor Environment in Offices: Relations with Building Characteristics, Influence on Occupant Perception and Reported Symptoms Related to the Building—The Officair Project

Personal control over various indoor environment parameters, especially in the last decades, appear to have a significant role on occupants’ comfort, health and productivity. To reveal this complex relationship, 7441 occupants of 167 recently built or retrofitted office buildings in eight European countries participated in an online survey about personal/health/work data as well as physical/psycho-social information. The relationship between the types of control available over indoor environments and the perceived personal control of the occupants was examined, as well as the combined effect of the control parameters on the perceived comfort using multilevel statistical models. The results indicated that most of the occupants have no or low control on noise. Half of the occupants declared no or low control on ventilation and temperature conditions. Almost one-third of them remarked that they do not have satisfactory levels of control for lighting and shading from sun conditions. The presence of operable windows was shown to influence occupants’ control perception over temperature, ventilation, light and noise. General building characteristics, such as floor number and floor area, office type, etc., helped occupants associate freedom positively with control perception. Combined controlling parameters seem to have a strong relation with overall comfort, as well as with perception regarding amount of privacy, office layout and decoration satisfaction. The results also indicated that occupants with more personal control may have less building-related symptoms. Noise control parameter had the highest impact on the occupants’ overall comfort.

A comparative study on arsenic fractions in indoor/outdoor particulate matters: a case in Baoding, China

The distribution and bioavailability of arsenic (As) in indoor/outdoor total suspended particulates (TSP), inhalable particulate matters (PM₁₀), and fine particulate matters (PM_2.5) in Baoding, China were investigated. The average I/O ratios for TSP, PM₁₀, and PM_2.5 were 0.52, 0.66, and 0.96, respectively. There was no significant correlation between indoor/outdoor TSP, PM₁₀, and PM_2.5. The indoor/outdoor concentrations of As surpassed the limited value of As. I/O ratios of arsenic in TSP, PM₁₀, and PM_2.5 were 0.52, 0.58, and 0.55, respectively. The contents of arsenic in different fractions were mainly affected by the total concentrations of arsenic in particulate matters (PM) rather than the particle sizes for TSP and PM₁₀. Arsenic was mainly in non-specifically sorbed fraction (F1) in both indoor and outdoor PM_2.5. The evaluated carcinogenic risk (CR) was within the safe level. The bioavailability of As increased with particle size decreasing for both indoor and outdoor PM. The potential bioavailability of As in outdoor particles was higher than that of indoor particles with the same size, especially PM_2.5.

LncRNA MALAT1, an lncRNA acting via the miR-204/ZEB1 pathway, mediates the EMT induced by organic extract of PM2.5 in lung bronchial epithelial cells

Extensive cohort studies have explored the hazards of particulate matter with aerodynamic diameter 2.5 μm or smaller (PM2.5) to human respiratory health; however, the molecular mechanisms for PM2.5 carcinogenesis are poorly understood. Long non-coding RNAs (lncRNAs) are involved in various pathophysiological processes. In the present study, we investigated the effect of PM2.5 on the epithelial-mesenchymal transition (EMT) in lung bronchial epithelial cells and the underlying mechanisms mediated by an lncRNA. Organic extracts of PM2.5 from Shanghai were used to treat human bronchial epithelial cell lines (HBE and BEAS-2B). The PM2.5 organic extracts induced the EMT and cell transformation. High levels of metastasis-associated lung adenocarcinoma transcript 1 (MALAT1), mediated by NF-κB, were involved in the EMT process. For both cell lines, there was a similar response. In addition, MALAT1 interacted with miR-204 and reversed the inhibitory effect of its target gene, ZEB1, thereby contributing to the EMT and malignant transformation. In sum, these findings show that NF-κB transcriptionally regulates MALAT1, which, by binding with miR-204 and releasing ZEB1, promotes the EMT. These results offer an understanding of the regulatory network of the PM2.5-induced EMT that relates to the health risks associated with PM2.5.

NF-κB-regulation of miR-155, via SOCS1/STAT3, is involved in the PM2.5-accelerated cell cycle and proliferation of human bronchial epithelial cells

Air pollution, especially fine particulate matter (PM_2.5, particles <2.5 μm in size), induces adverse health effects on the respiratory system. Uncontrolled proliferation of bronchial epithelial cells, resulting from deregulated cell cycle progression, contributes to pulmonary homeostatic imbalance. Although dysregulation of miRNAs is involved in a variety of pathophysiologic processes, the role of miRNAs in lung injury caused by PM_2.5 is unclear. In the present study, we found that different concentrations of PM_2.5 caused a biphasic effect on proliferation of human bronchial epithelial (HBE) cells. PM_2.5 induced an aberrant cell cycle and proliferation of HBE cells, and up-regulated miR-155 levels with a concentration-dependent manner. High miR-155 expression, mediated by NF-κB activation, produced an accelerated G1/S phase and cell proliferation though the STAT3 pathway, which targeted SOCS1. These findings indicate that NF-κB-mediated miR-155 induces an altered cell cycle through epigenetic modulation of the SOCS1/STAT3 signaling pathway and provide a mechanism for the biphasic effect of different concentrations of PM_2.5 in inducing respiratory injury.

The mechanisms for lung cancer risk of PM2.5 : Induction of epithelial-mesenchymal transition and cancer stem cell properties in human non-small cell lung cancer cells

Fine particulate matter (PM_2.5 ) is a major component of air pollutions that are closely associated with increased risk of lung cancer. However, the role of PM_2.5 in the etiology of lung cancer is largely unknown. In this study, we performed acute (24 hours) and chronic (five passages) exposure models to investigate the carcinogenetic mechanisms of PM_2.5 by targeting the induction of epithelial-mesenchymal transition (EMT) and cancer stem cells (CSC) properties in human non-small cell lung cancer cell line A549. We found that both acute and chronic PM_2.5 exposure enhanced cell migration and invasion, decreased mRNA expression of epithelial markers and increased mRNA expression of mesenchymal markers. Chronic PM_2.5 exposure further induced notable EMT morphology and CSC properties, indicating the developing process of cell malignant behaviors from acute to chronic PM_2.5 exposure. CSC properties induced by chronic PM_2.5 exposure characterized with increased cell-surface markers (CD44, ABCG2), self-renewal genes (SOX2 and OCT4), side population cells and neoplastic capacity. Furthermore, the levels of three stemness-associated microRNAs, Let-7a, miR-16 and miR-34a, were found to be significantly downregulated by chronic PM_2.5 exposure, with microarray data analysis from TCGA database showing their lower expression in human lung adenocarcinoma tissues than that in the adjacent normal lung tissues. These data revealed that the induction of EMT and CSC properties were involved in the lung cancer risk of PM_2.5 , and implicated CSC properties and related microRNAs as possible biomarkers for carcinogenicity prediction of PM_2.5 .

Spatial and temporal variation of particulate matter characteristics within office buildings - The OFFICAIR study

In the frame of the OFFICAIR project, office buildings were investigated across Europe to assess how the office workers are exposed to different particulate matter (PM) characteristics (i.e. PM_2.5 mass concentration, particulate oxidative potential (OP) based on ascorbate and reduced glutathione depletion, trace element concentration and total particle number concentration (PNC)) within the buildings. Two offices per building were investigated during the working hours (5 consecutive days; 8h per day) in two campaigns. Differences were observed for all parameters across the office buildings. Our results indicate that the monitoring of the PM_2.5 mass concentration in different offices within a building might not reflect the spatial variation of the health relevant PM characteristics such as particulate OP or the concentration of certain trace elements (e.g., Cu, Fe), since larger differences were apparent within a building for these parameters compared to that obtained for the PM_2.5 mass concentration in many cases. The temporal variation was larger for almost all PM characteristics (except for the concentration of Mn) than the spatial differences within the office buildings. These findings indicate that repeated or long-term monitoring campaigns are necessary to have information about the temporal variation of the PM characteristics. However, spatial variation in exposure levels within an office building may cause substantial differences in total exposure in the long term. We did not find strong associations between the investigated indoor activities such as printing or windows opening and the PNC values. This might be caused by the large number of factors affecting PNC indoors and outdoors.

Sources, health effects and control strategies of indoor fine particulate matter (PM2.5): A review

Indoor air quality is directly influenced by indoor PM_2.5. Short-term and long-term exposure of PM_2.5 in the micro environment would severely detriment the health of both humans and animals. The researches both at home and abroad dating from 2000 were analyzed and summarized mainly in the following 3 sections: source apportionment, health effects and control methods. Health effects were illustrated in both epidemiology and toxicology. The epidemiology was explicated in morbidity and mortality, the toxicology was illuminated in inflammatory reaction, oxidative stress, genotoxicity, mutagenicity and carcinogenicity. Control methods were showed in two aspects (sources and means of transmission), of which each was resolved by corresponding control strategy. Abundant investigations indicated that comprehensive control strategies were needed for sources decrement and health burden mitigation of indoor PM_2.5. Based on the increasingly wide research of indoor PM_2.5, the concept of indoors was essentially expanded, and on the basis of the summary of all the aspects mentioned above, both the scope and depth of indoor PM_2.5 research were found insufficiently. Meantime, the potential direction of development in indoor PM_2.5 research were projected, in hope of contributing to further relevant study of engineers in ambient environment and building environment.

Assessment of indoor and outdoor particulate air pollution at an urban background site in Iran

The relationship between indoor and outdoor particulate air pollution was investigated at an urban background site on the Payambar Azam Campus of Mazandaran University of Medical Sciences in Sari, Northern Iran. The concentration of particulate matter sized with a diameter less than 1 μm (PM_1.0), 2.5 μm (PM_2.5), and 10 μm (PM₁₀) was evaluated at 5 outdoor and 12 indoor locations. Indoor sites included classrooms, corridors, and office sites in four university buildings. Outdoor PM concentrations were characterized at five locations around the university campus. Indoor and outdoor PM measurements (1-min resolution) were conducted in parallel during weekday mornings and afternoons. No difference found between indoor PM₁₀ (50.1 ± 32.1 μg/m³) and outdoor PM₁₀ concentrations (46.5 ± 26.0 μg/m³), indoor PM_2.5 (22.6 ± 17.4 μg/m³) and outdoor PM_2.5 concentration (22.2 ± 15.4 μg/m³), or indoor PM_1.0 (14.5 ± 13.4 μg/m³) and outdoor mean PM_1.0 concentrations (14.2 ± 12.3 μg/m³). Despite these similar concentrations, no correlations were found between outdoor and indoor PM levels. The present findings are not only of importance for the potential health effects of particulate air pollution on people who spend their daytime over a period of several hours in closed and confined spaces located at a university campus but also can inform regulatory about the improvement of indoor air quality, especially in developing countries.

Assessment of indoor air quality in office buildings across Europe - The OFFICAIR study

The European project OFFICAIR aimed to broaden the existing knowledge regarding indoor air quality (IAQ) in modern office buildings, i.e., recently built or refurbished buildings. Thirty-seven office buildings participated in the summer campaign (2012), and thirty-five participated in the winter campaign (2012-2013). Four rooms were investigated per building. The target pollutants were twelve volatile organic compounds, seven aldehydes, ozone, nitrogen dioxide and particulate matter with aerodynamic diameter <2.5μm (PM_2.5). Compared to other studies in office buildings, the benzene, toluene, ethylbenzene, and xylene concentrations were lower in OFFICAIR buildings, while the α-pinene and d-limonene concentrations were higher, and the aldehyde, nitrogen dioxide and PM_2.5 concentrations were of the same order of magnitude. When comparing summer and winter, significantly higher concentrations were measured in summer for formaldehyde and ozone, and in winter for benzene, α-pinene, d-limonene, and nitrogen dioxide. The terpene and 2-ethylhexanol concentrations showed heterogeneity within buildings regardless of the season. Considering the average of the summer and winter concentrations, the acetaldehyde and hexanal concentrations tended to increase by 4-5% on average with every floor level increase, and the nitrogen dioxide concentration tended to decrease by 3% on average with every floor level increase. A preliminary evaluation of IAQ in terms of potential irritative and respiratory health effects was performed. The 5-day median and maximum indoor air concentrations of formaldehyde and ozone did not exceed their respective WHO air quality guidelines, and those of acrolein, α-pinene, and d-limonene were lower than their estimated thresholds for irritative and respiratory effects. PM_2.5 indoor concentrations were higher than the 24-h and annual WHO ambient air quality guidelines.