Antibiotic resistance genes, bacterial communities, and functions in constructed wetland-microbial fuel cells: Responses to the co-stresses of antibiotics and zinc

Performance optimization for Pb(II) -containing wastewater treatment in constructed wetland-microbial fuel cell triggered by biomass dosage and Pb(II) level

Three identical sets of constructed wetland-microbial fuel cells (CW-MFCs) fabricated with biomass carbon source addition were constructed and underwent the short- and long-term experiments. For this, the efficacy of biomass dosage and Pb(II) concentration towards Pb(II) removal and concurrent bioelectricity production of CW-MFCs were systematically explored. From the perspective of integrated capabilities and economic benefits, the solid biomass carbon sources equivalent to 500 mg/L COD was regarded as the optimal dosage, and the corresponding device was labeled as CW-MFC-2. For the short-term experiment, the closed-circuit CW-MFC-2 produced maximum output voltages and power densities in a range of 386-657 mV and 1.55 × 103-6.31 × 103 mW/m2 with the increasing Pb(II) level, respectively. Also, Pb(II) removal up to 94.4-99.6% was obtained in CW-MFC-2. With respect to long-term experiment, Pb(II) removal, the maximum output voltage, and power density of CW-MFC-2 ranged from 98.7 to 99.2%, 322 to 387 mV, and 3.28 × 102 to 2.26 × 103 mW/m2 upon 200 mg/L Pb(II) level, respectively. The migration results confirmed the potential of substrate and biomass for Pb(II) adsorption and fixation. For the cathode, Pb(II) was fixed and removed via binding to O. This study enlarges our knowledge of effective modulation of CW-MFCs for the treatment of high-level Pb(II)-containing wastewater and bioelectricity generation via adopting desirable biomass dosage.

Machine Learning in Bioelectrocatalysis

At present, the global energy crisis and environmental pollution coexist, and the demand for sustainable clean energy has been highly concerned. Bioelectrocatalysis that combines the benefits of biocatalysis and electrocatalysis produces high-value chemicals, clean biofuel, and biodegradable new materials. It has been applied in biosensors, biofuel cells, and bioelectrosynthesis. However, there are certain flaws in the application process of bioelectrocatalysis, such as low accuracy/efficiency, poor stability, and limited experimental conditions. These issues can possibly be solved using machine learning (ML) in recent reports although the combination of them is still not mature. To summarize the progress of ML in bioelectrocatalysis, this paper first introduces the modeling process of ML, then focuses on the reports of ML in bioelectrocatalysis, and ultimately makes a summary and outlook about current issues and future directions. It is believed that there is plenty of scope for this interdisciplinary research direction.

Effects of pH on simultaneous Cr(VI) and p-chlorophenol removal and electrochemical performance in Leersia hexandra constructed wetland-microbial fuel cell

Cr(VI) and p-chlorophenol (4-CP) are common pollutants in the aquatic environment but are difficult to degrade and have complex toxic effects. A downflow Leersia hexandra microbial fuel cell (DLCW-MFC) system was constructed to purify Cr(VI) and 4-CP polluted wastewater, as well as to investigate the effects of different pHs on Cr(VI) and 4-CP removal, electrochemical performance, physiological and biochemical responses, and Cr enrichment status of L. hexandra. The results showed that the DLCW-MFC had the highest Cr(VI) and 4-CP removal rates at pH 6.5, which were 99.0% and 78.6%, respectively. At the same time, 543 mV output voltage and 72.25 mW/m2 power density of the system were generated at pH 6.5, which were better than those at pH 7.4 and pH 5.8. The electrochemical performance result showed that pH 6.5 enhanced charge transfer ability and ion diffusion ability of the system. pH 6.5 also promoted growth and photosynthesis, and enhanced the Cr enrichment capacity (4.56 mg/10 plants) of L. hexandra. These results demonstrate that pH 6.5 was the optimum pH for the DLCW-MFC synchronous treatment of Cr(VI) and 4-CP as well as the generation of electricity. The DLCW-MFC designed in this study will provide a reference for purifying polluted wastewater and generating electricity.

Zinc effects on bacteria: insights from Escherichia coli by multi-omics approach

IMPORTANCE

A long-term exposure of bacteria to zinc oxide and zinc oxide nanoparticles leads to major alterations in bacterial morphology and physiology. These included biochemical and physiological processes promoting the emergence of strains with multi-drug resistance and virulence traits. After the removal of zinc pressure, bacterial phenotype reversed back to the original state; however, certain changes at the genomic, transcriptomic, and proteomic level remained. Why is this important? The extensive and intensive use of supplements in animal feed effects the intestinal microbiota of livestock and this may negatively impact the health of animals and people. Therefore, it is crucial to understand and monitor the impact of feed supplements on intestinal microorganisms in order to adequately assess and prevent potential health risks.

Biofilm electrode reactor coupled manganese ore substrate up-flow microbial fuel cell-constructed wetland system: High removal efficiencies of antibiotic, zinc (II), and the corresponding antibiotic resistance genes

A coupled system comprised of a biofilm electrode reactor (BER) and a manganese ore substrate microbial fuel cell-constructed wetland (MFC-CW) system was used to remove co-exposed antibiotic and Zn (II), as well as simultaneously reduce copies of antibiotic resistance genes (ARGs) in the current study. In this system, BER primarily reduced the concentrations of antibiotics and Zn (II), and the effluent was used as the input to the MFC-CW, thereby providing electricity to BER. Co-exposure to a high concentration of Zn (II) decreased the relative abundances (RAs) of ARGs in the BER effluent, whereas the remaining sub-lethal concentration of Zn (II) increased the RAs of ARGs in the MFC-CW effluent. Even though the absolute copies of ARGs in the effluents increased during co-exposure, the total number of target ARG copies in the effluent of MFC-CW was significantly lower than that of BER. Moreover, BER pre-treatment eliminated most of Zn (II), which improved the electrical power generation characteristic of the MFC-CW unit. Correspondingly, the bacterial community and the ARGs hosts were analyzed to demonstrate the mechanism. In conclusion, the coupled system demonstrates significant potential to reduce antibiotics, Zn (II) and environmental risks posed by ARGs.

Enhanced degradation of ibuprofen in an integrated constructed wetland-microbial fuel cell: treatment efficiency, electrochemical characterization, and microbial community dynamics

Over the past few decades, there has been a growing concern regarding the fate and transport of pharmaceuticals, particularly antibiotics, as emerging contaminants in the environment. It has been proposed that the presence of antibiotics at concentrations typically found in wastewater can impact the dynamics of bacterial populations and facilitate the spread of antibiotic resistance. The efficiency of currently-used wastewater treatment technologies in eliminating pharmaceuticals is often insufficient, resulting in the release of low concentrations of these compounds into the environment. In this study, we addressed these challenges by evaluating how different influent ibuprofen (IBU) concentrations influenced the efficiency of a laboratory-scale, integrated constructed wetland-microbial fuel cell (CW-MFC) system seeded with Eichhornia crassipes, in terms of organic matter removal, electricity generation, and change of bacterial community structure compared to unplanted, sediment MFC (S-MFC) and abiotic S-MFC (AS-MFC). We observed that the addition of IBU (5 mg L-1) resulted in a notable decrease in chemical oxygen demand (COD) and electricity generation, suggesting that high influent IBU concentrations caused partial inhibition for the electroactive microbial community due to its complexity and aromaticity. However, CW-MFC could recover from IBU inhibition after an acclimation period compared to unplanted S-MFC, even though the influent IBU level was increased up to 20 mg L-1, suggesting that plants in CW-MFCs have a beneficial role in relieving the inhibition of anode respiration due to the presence of high levels of IBU; thus, promoting the metabolic activity of the electroactive microbial community. Similarly, IBU removal efficiency for CW-MFC (i.e., 49-62%) was much higher compared to SMFC (i.e., 29-42%), and AS-MFC (i.e., 20-22%) during all experimental phases. In addition, our high throughput sequencing revealed that the high performance of CW-MFCs compared to S-MFC was associated with increasing the relative abundances of several microbial groups that are closely affiliated with anode respiration and organic matter fermentation. In summary, our results show that the CW-MFC system demonstrates suitability for high removal efficiency of IBU and effective electricity generation.

Comparative study on the treatment of swine wastewater by VFCW-MFC and VFCW: Pollutants removal, electricity generation, microorganism community

Swine wastewater, characterized by high organic and nutrient content, poses significant environmental challenges. This study aims to compare the effectiveness of two treatment technologies, namely Vertical Flow Constructed Wetland-Microbial Fuel Cell (VFCW-MFC) and Vertical Flow Constructed Wetland (VFCW), in terms of pollutant removal, electricity generation, and microorganism community dynamics. The results showed that the average removal efficiencies of chemical oxygen demand (COD), ammonia nitrogen, total nitrogen (TN), total phosphorus (TP) and sulfadiazine antibiotics (SDZ) by VFCW-MFC were as high as 94.15%, 95.01%, 42.24%, 97.16% and 82.88%, respectively, which were all higher than that by VFCW. Both VFCW-MFC and VFCW have good tolerance to SDZ. In addition, VFCW-MFC has excellent electrical performance, with output voltage, power density, coulombic efficiency and net energy recovery up to 443.59 mV, 51.2 mW/m³, 52.91% and 2.04 W/(g·s), respectively, during stable operation. Moreover, the microbial community diversity of VFCW-MFC was more abundant, and the species abundance distribution in cathode region was more rich and even than in anode region. At phylum level, the dominant microorganisms in VFCW-MFC included Proteobacteria, Bacteroidota, Firmicutes and Actinobacteriota, which showed good degradation effect on SDZ. Proteobacteria and Firmicutes are also involved in electricity production. Chloroflexi, Proteobacteria and Bacteroidota play a major role in nitrogen reduction.

The dynamics and transmission of antibiotic resistance associated with plant microbiomes

Antibiotic resistance genes (ARGs) have been widely found and studied in soil and water environments. However, the propagation of ARGs in plant microbiomes has attracted insufficient attention. Plant microbiomes, especially the rhizosphere microorganisms, are closely connected with water, soil, and air, which allows ARGs to spread widely in ecosystems and pose a threat to human health after entering the human body with bacteria. Therefore, it is necessary to deeply understand and explore the dynamics and the transmission of ARGs in rhizosphere microorganisms and endophytes of plants. In this review, the transmission and influencing factors of ARGs in the microorganisms associated with plants, especially the influence of root exudates on plant microbiomes, are analyzed. Notably, the role of intrinsic genes of plants in determining root exudates and their potential effects on ARGs are proposed and analyzed. The important role of phyllosphere microorganisms and endophytes in the transmission of ARGs and co-resistance of antibiotics and other substances are also emphasized. The proliferation and transmission of ARGs associated with plant microbiomes addressed in this review is conducive to revealing the fate of ARGs in plant microorganisms and alleviating ARG pollution.

Impact of antibiotics on microbial community in aquatic environment and biodegradation mechanism: a review and bibliometric analysis

Antibiotic residues in aquatic environments pose a potential hazard, and microbes, which play important roles in aquatic ecosystems, are vulnerable to the impacts of antibiotics. This study aimed to analyze the research progress, trends, and hot topics of the impact of antibiotics on microbial community and biodegradation mechanism using bibliometric analysis. An in-depth analysis of the publication characteristics of 6143 articles published between 1990 and 2021 revealed that the number of articles published increased exponentially. The research sites have been mainly concentrated in the Yamuna River, Pearl River, Lake Taihu, Lake Michigan, Danjiangkou Reservoir, etc., illustrating that research around the world is not even. Antibiotics could change the diversity, structure, and ecological functions of bacterial communities, stimulate a widespread abundance of antibiotic-resistant bacteria and antibiotic-resistant genes, and increase the diversity of eukaryotes, thus triggering the shift of food web structure to predatory and pathogenic. Latent Dirichlet allocation theme model analysis showed three clusters, and the research hotspots mainly included the effect of antibiotics on the denitrification process, microplastics combined with antibiotics, and methods for removing antibiotics. Furthermore, the mechanisms of microbe-mediated antibiotic degradation were unraveled, and importantly, we provided bottlenecks and future research perspectives on antibiotics and microbial diversity research.

Enhanced nickel removal and synchronous bioelectricity generation based on substrate types in microbial fuel cell coupled with constructed wetland: performance and microbial response

In this study, an attempt was made to clarify the impact of substrates on the microbial fuel cell coupled with constructed wetland (CW-MFC) towards the treatment of nickel-containing wastewater. Herein, zeolite (ZEO), coal cinder (COA), ceramsite (CER), and granular activated carbon (GAC) were respectively introduced into lab-scaled CW-MFCs to systematically investigate the operational performances and microbial community response. GAC was deemed as the most effective substrate, and the corresponding device yielded favorable nickel removal efficiencies over 99% at different initial concentrations of nickel. GAC-CW-MFC likewise produced a maximum output voltage of 573 mV, power density of 8.95 mW/m², and internal resistance of 177.9 Ω, respectively. The strong adsorptive capacity of nickel by GAC, accounting for 54.5% of total contaminant content, was mainly responsible for the favorable nickel removal performances of device GAC-CW-MFC. The high-valence Ni²⁺ was partially reduced to elemental Ni⁰ on the cathode, which provided evidence for the removal of heavy metals via the cathodic reduction of CW-MFC. The microbial community structure varied considerably as a result of substrates addition. For an introduction of GAC into the CW-MFC, a remarkably enriched population of genera Thermincola, norank_f__Geobacteraceae, Anaerovorax, Bacillus, etc. was noted. This study was dedicated to providing a theoretical guidance for an effective regulation of CW-MFC treatment on nickel-containing wastewater and accompanied by bioelectricity generation via the introduction of optimal substrate.

Structure, mechanism, and toxicity in antibiotics metal complexation: Recent advances and perspectives

Antibiotic-metal complexes (AMCs) formed by antibiotics and metal ions have attracted considerable attentions in recent years. Although different removal methods for AMCs have been reported in the literature, very few investigations have focused on the mechanisms and toxic effects of antibiotic-metal coordination. This review briefly describes the structural characteristics of various commonly used antibiotics and the coordination mechanisms with metal ions. Considering the complexity of the real environment, various environmental factors affecting AMC formation are highlighted. The effects of AMCs on microbial community structure and the role of metal ions in influencing resistant genes from the molecular perspective are of interest within this work. The toxicities and mechanisms of AMCs on different species of biota are also discussed. These findings underline the need for more targeted detection and analysis methods and more suitable toxicity markers to verify the combination of antibiotics with metal ions and reveal environmental toxicities in future. This review presents an innovative idea that antibiotics combined with metal ions will change the toxicity and environmental behavior of antibiotics.

Maximizing electron flux, microbial diversity and gene abundance in MFC powered electro-Fenton system by optimizing co-addition of lysozyme and 2-bromoethanesulfonate

In this study, a microbial fuel cell powered electro-Fenton system (MFCⓅEFs) was established in order to overcome the shortcomings of low electron flux and unexpected methane production, while simultaneously treating excess sludge (ES, substrate) and refractory syringic acid (SA). A strategy of co-adding lysozyme (LZ, as ES degradation catalyst) and 2-bromoethanesulfonate (BES, as methane inhibitor) into ES was optimized in MFCⓅEFs to maximize electron flux, microbial community diversity and functional gene abundance. The removal of sludge total chemical oxygen demand (TCOD) achieved 81.69% in 25 d under an optimal co-addition strategy (40.41 mg/gSS of LZ, 27.03 mmol/L of BES, adding on 22.8 h of the7th day), with a simultaneous high degradation of SA (99.30% in 25 h). Correspondingly, a maximum power density of 3.35 W/m³ was achieved (only 0.62 W/m³ from the control), which effectively realizes in-situ micro-electricity generation and utilization for bioelectric Fenton processes. Moreover, 42.25% of the total charges were employed for bio-electricity generation. The electricigens of Pseudomonas, Acinetobacter and Chlorobium showed effective enrichment, while the abundance of methanogenesis archaea was extremely decreased. Functional genes associated with methanogenesis including mtaA, hdra, and mcrA were effectively inhibited. The life cycle assessment along with an optimized co-addition strategy illustrated a beneficial environmental effect, particularly in terms of ecosystem quality and climate change. Above all, an enhanced synchronous degradation of excess sludge and refractory pollutants had been realized in a green and environmentally friendly way.

Fate of resistome components and characteristics of microbial communities in constructed wetlands and their receiving river

Currently, most researches focus on that constructed wetlands (CWs) achieve desirable removal of antibiotics, antibiotic resistance genes (ARGs) and human pathogens. However, few studies have assessed the fate of resistome components, especially the behavior and cooccurrence of ARGs, mobile genetic elements (MGEs) and virulence factors (VFs). Therefore, characteristics of microbial communities (MCs) in CWs and their receiving rivers also deserve attention. These factors are critical to water ecological security. This study used two CWs to explore the fate of resistome components and characteristics of MCs in the CWs and their receiving river. Eleven samples were collected from the two CWs and their receiving river. High-throughput profiles of ARGs and microbial taxa in the samples were characterized. 31 ARG types consisting of 400 subtypes with total relative abundance 42.63-84.94× /Gb of sequence were detected in CWs, and 62.07-88.08× /Gb of sequence in river, evidencing that ARG pollution covered CWs and the river, and implying huge potential risks from ARGs. MGEs and VFs were detected, and tnpA, IS91 and intI1 were the three dominant MGEs, while Flagella. Type IV pili and peritrichous flagella were main VFs. Both CWs can remove ARGs, MGEs and VFs efficiently. However, some ARGs were difficult to remove, such as sul1 and sul2, and certain ARGs remained in the effluent of the CWs. The co-occurrence of ARGs, MGEs, and VFs implies the risk of antibiotic resistance and dissemination of ARGs. Eighty-five types of human pathogen were detected in the river samples, particularly Pseudomonas aeruginosa, Bordetella bronchiseptica, Aeromonas hydrophila and Helicobacter pylori. Correlation analysis indicated that MCs had significant effects on the profiles of ARGs in the water environment. This study reveals potential risks of the reuse of reclaimed water, and illustrates the removal ability of ARGs and related elements by CWs. This study will be helpful for monitoring and managing resistomes in water environments.

A review on antibiotics removal: Leveraging the combination of grey and green techniques

Antibiotics are currently a major source of concern around the world due to the serious risks posed to human health and the environment. The performance of the secondary wastewater treatment processes/technologies (representing grey process) and constructed wetlands (CWs) (typical green process) in removing antibiotics and antibiotic resistance genes (ARG) was reviewed. The result showed that the grey process mainly removes antibiotics, but does not significantly remove ARG, and some processes may even cause ARG enrichment. The overall treatment in CWs is better than WWTPs, especially for ARG. Vertical subsurface flow CWs (VFCWs) are more conductive to antibiotics removal, while horizontal subsurface flow CWs (HFCWs) have a better ARG removal. More importantly, this review admits and suggests that the combination of grey process with green process is an effective strategy to remove antibiotics and ARG. The most advantage of the combination lies in realizing complementary advantages, i.e. the grey process as the primary treatment while CWs as the polishing stage. The efficiency of such the hybrid system is much higher than either single treatment process.

Current Progress in Natural Degradation and Enhanced Removal Techniques of Antibiotics in the Environment: A Review

Antibiotics are used extensively throughout the world and their presence in the environment has caused serious pollution. This review summarizes natural methods and enhanced technologies that have been developed for antibiotic degradation. In the natural environment, antibiotics can be degraded by photolysis, hydrolysis, and biodegradation, but the rate and extent of degradation are limited. Recently, developed enhanced techniques utilize biological, chemical, or physicochemical principles for antibiotic removal. These techniques include traditional biological methods, adsorption methods, membrane treatment, advanced oxidation processes (AOPs), constructed wetlands (CWs), microalgae treatment, and microbial electrochemical systems (such as microbial fuel cells, MFCs). These techniques have both advantages and disadvantages and, to overcome disadvantages associated with individual techniques, hybrid techniques have been developed and have shown significant potential for antibiotic removal. Hybrids include combinations of the electrochemical method with AOPs, CWs with MFCs, microalgal treatment with activated sludge, and AOPs with MFCs. Considering the complexity of antibiotic pollution and the characteristics of currently used removal technologies, it is apparent that hybrid methods are better choices for dealing with antibiotic contaminants.

Current Concentrations of Zn, Cu, and As in Piggery Wastewater Compromise Nutrient Removals in Microalgae–Bacteria Photobioreactors Due to Altered Microbial Communities

Simple Summary

Photobioreactor systems based on consortia of microalgae and bacteria are a promising, efficient and sustainable alternative for treatment of wastewaters with high nitrogen content, such as piggery wastewater. In these biological systems, microorganisms play a key role in wastewater treatment by degradation of organic matter and accumulation of nutrients into the generated biomass. However, these wastewaters often contain high concentrations of zinc, copper and arsenic, which can severely affect the activity and growth of microorganisms, and so, the wastewater treatment performance. This article studies the effect of high concentrations of zinc, copper and arsenic on microbial communities, specifically microalgae and bacteria, in photobioreactors treating piggery wastewater, with the aim of elucidating their impact on wastewater treatment performance. For this purpose, the growth of microalgae and the composition and structure of bacterial communities exposed to these pollutants were studied. The performance of the reactors was also evaluated by determining the removal of nutrients, zinc, copper and arsenic. The results showed that high concentrations of zinc, copper and arsenic in piggery wastewater significantly affect the microbiome of the reactors without recovery after exposure to these contaminants, resulting in poorer performance of the reactors and compromising the environmental and health impact of treated effluents.

Abstract

The treatment of pig manure is a major environmental issue, and photobioreactors containing consortia of microalgae and bacteria have proven to be a promising and sustainable treatment alternative. This work studies the effect of Cu, Zn and As, three toxic elements frequently present in piggery wastewater, on the performance and microbiome of photobioreactors. After dopage with Zn (100 mg/L), Cu (100 mg/L), and As (500 µg/L), the high biomass uptake of Zn (69–81%) and Cu (81–83%) decreased the carbon removal in the photobioreactors, inhibited the growth of Chlorella sp., and affected heterotrophic bacterial populations. The biomass As uptake result was low (19%) and actually promoted microalgae growth. The presence of Cu and As decreased nitrogen removal, reducing the abundance of denitrifying bacterial populations. The results showed that metal(loid)s significantly affected 24 bacterial genera and that they did not recover after exposure. Therefore, this study makes an important contribution on the impact of the presence of metal(loid)s in piggery wastewater that compromises the overall performance of PBRs, and so, the environmental and health impact of treated effluents.

Effects of heavy metals pollution on the co-selection of metal and antibiotic resistance in urban rivers in UK and India

Heavy metal pollution and the potential for co-selection of resistance to antibiotics in the environment is growing concern. However, clear associations between heavy metals and antibiotic resistance in river systems have not been developed. Here we investigated relationships between total and bioavailable heavy metals concentrations; metal resistance gene (MRG) and antibiotic resistance gene (ARG) abundances; mobile genetic elements; and the composition of local bacterial communities in low and high metal polluted rivers in UK and India. The results indicated that MRGs conferring resistance to cobalt (Co) and nickel (Ni) (rcnA), and Co, zinc (Zn), and cadmium (Cd) (czcA), and ARGs conferring resistance to carbapenem and erythromycin were the dominating resistant genes across the samples. The relative MRGs, ARGs, and integrons abundances tended to increase at high metal polluted environments, suggesting high metals concentrations have a strong potential to promote metal and antibiotic resistance by horizontal gene transmission and affecting bacterial communities, leading to the development of multi-metal and multi-antibiotic resistance. Network analysis demonstrated the positive and significant relationships between MRGs and ARGs as well as the potential for integrons playing a role in the co-transmission of MRGs and ARGs (r > 0.80, p < 0.05). Additionally, the major host bacteria of various MRGs and ARGs that could be accountable for greater MRGs and ARGs levels at high metal polluted environments were also identified by network analysis. Spearman's rank-order correlations and RDA analysis further confirm relationships between total and bioavailable heavy metals concentrations and the relative MRG, ARG, and integron abundances, as well as the composition of related bacterial communities (r > 0.80 (or < -0.80), p < 0.05). These findings are critical for assessing the possible human health concerns associated with metal-driven antibiotic resistance and highlight the need of considering metal pollution for developing appropriate measures to control ARG transmission.

Elucidating the beneficial effects of diatomite for reducing abundances of antibiotic resistance genes during swine manure composting

Diatomite (DE) has been used for nitrogen conservation during the composting of feces but its effects on antibiotic resistance genes (ARGs) and the associated mechanisms are still unclear. In this study, DE was added at three different proportions (0%, 4%, and 8%) to swine manure during composting. The results showed that adding DE helped to reduce the abundances of ARGs and the maximum decrease (88.99%) occurred with the highest dose. DE amendment promoted the transformation of reducible copper into a more stable form, i.e., the residual fraction, which reduced the selective pressure imposed by copper and further decreased the abundances of ARGs. Tn916/1545 and intI1 were critical genetic components related to ARGs, and thus the reductions in the abundances of ARGs may be attributed to the suppression of horizontal transfer due to the decreased abundances of mobile genetic elements (MGEs). The microbial community structure (bacterial abundance and diversity) played key role in the evolution of ARGs. DE could enhance the competition between hosts and non-hosts of ARGs by increasing the bacterial community diversity. Compared with CK, DE amendment optimized the bacterial community by reducing the abundances of the potential hosts of ARGs and pathogens such as Corynebacterium, thereby improving the safety of the compost product. In addition, KEGG function predictions revealed that adding DE inhibited the metabolic pathway and genes related to ARGs. Thus, composting with 8% DE can reduce the risk of ARG transmission and improve the practical value for agronomic applications.

Enhanced removal of heavy metals and metalloids by constructed wetlands: A review of approaches and mechanisms

Constructed wetlands (CWs) are increasingly employed to remediate heavy metal and metalloid (HMM)-polluted water. However, the disadvantages of HMM removal by conventional CWs (without enhancement), such as an unstable and unpredictable removal efficiency, hinder the reliability of this technology. The objective of this study was to review research on enhanced CWs for HMM removal. In particular, we performed a bibliometric analysis to evaluate research trends, critical literature, and keyword evolution in recent years. Subsequently, we reviewed various enhanced approaches for the application of CWs for the removal of HMMs, including the use of improved substrates, aquatic macrophytes, microorganisms, bioelectrochemical coupling systems, hybrid CW, external additives, and operation parameters. Furthermore, the main mechanisms underlying HMM removal by these approaches are summarized. Our review clearly reveals that research on the remediation of HMM-polluted water via CW technology is receiving increased attention, with no apparent trends in topics. The selection of appropriate enhanced approaches or operation parameters as well as methodological improvements should be based on the dominant environmental conditions of the CW column and removal mechanisms for the targeted HMMs. Based on the established literature, several suggestions are proposed to guide the optimization of the design and operation of efficient CWs for the treatment of HMM-polluted water.

A Review of Stand-Alone and Hybrid Microbial Electrochemical Systems for Antibiotics Removal from Wastewater

The growing concern about residual antibiotics in the water environment pushes for innovative and cost-effective technologies for antibiotics removal from wastewater. In this context, various microbial electrochemical systems have been investigated as an alternative to conventional wastewater technologies that are usually ineffective for the adequate removal of antibiotics. This review article details the development of stand-alone and hybrid or integrated microbial electrochemical systems for antibiotics removal from wastewater. First, technical features, antibiotics removal efficiencies, process optimization, and technological bottlenecks of these systems are discussed. Second, a comparative summary based on the existing reports was established to provide insights into the selection between stand-alone and hybrid systems. Finally, research gaps, the relevance of recent progress in complementary areas, and future research needs have been discussed.

Response behavior of antibiotic resistance genes to zinc oxide nanoparticles in cattle manure thermophilic anaerobic digestion process: A metagenomic analysis

This work investigated the metagenomics-based behavior of antibiotic resistance genes (ARGs) during cattle manure anaerobic digestion with zinc oxide nanoparticles (ZnO NPs) that are commonly used as animal feed additives. The 6.6% decrease in total ARGs abundance while remained unchanged ARGs diversity with ZnO NPs (5 mg/g total solid), suggested ZnO NPs may mitigate ARGs risk by abundance. Also, ZnO NPs affected ARGs with mechanisms specifically of antibiotic inactivation and antibiotic target change, and declined potential hosts' abundance (bacterial genus Ruminiclostridium, Riminococcus, and Paenibacillus) which mainly contributed to the decreased ARGs' abundance. Besides, microbial chemotaxis decreased by 17% with ZnO NPs compared to that without nanoparticles indicated a depression on potential hosts, who could develop the mechanism to adapt to altered digestion conditions, which probably inhibited the ARGs' propagation. These findings are important to promote understanding of the potential ARGs risks in treatments of livestock wastes containing animal feed additives.

High removal efficiencies of antibiotics and low accumulation of antibiotic resistant genes obtained in microbial fuel cell-constructed wetlands intensified by sponge iron

Using microbial fuel cells with constructed wetlands (MFC-CWs) for eliminating antibiotics has recently attracted extensive attention. However, antibiotic removal efficiencies in MFC-CWs must be enhanced, and the accumulation of antibiotic resistant genes (ARGs) remains an unmanageable issue. This study tries to enhance the antibiotic removal in synthetic wastewater and reduce ARGs by adding sponge iron (s-Fe⁰) and calcium peroxide to the anode and cathode of MFC-CWs, respectively, and/or simultaneously. The results demonstrated that adding s-Fe⁰ and calcium peroxide to MFC-CWs could improve the removal efficiencies of sulfamethoxazole (SMX) and tetracycline (TC) by 0.8-1.3% and 6.0-8.7%. Therein, s-Fe⁰ also significantly reduced 84.10-94.11% and 49.61-60.63% of total sul and tet genes, respectively. Furthermore, s-Fe⁰ improved the voltage output, power density, columbic efficiency, and reduced the internal resistance of reactors. The intensification to the electrode layers posed a significant effect on the microbial community composition and functions, which motivated the shift of antibiotic removal, accumulation of ARGs and bioelectricity generation in MFC-CWs. Given the overall performance of MFC-CWs, adding s-Fe⁰ to the anode region of MFC-CWs was found to be an effective strategy for removing antibiotics and reducing the accumulation of ARGs.

Rapid removal of chloramphenicol via the synergy of Geobacter and metal oxide nanoparticles

The wide use of chloramphenicol and its residues in the environments are an increasing threat to human beings. Electroactive microorganisms were proven with the ability of biodegradation of chloramphenicol, but the removal rate and efficiency need to be improved. In this study, a model electricigens, Geobacter metallireducens, was supplied with and Fe₃O₄ and MnO₂ nanoparticles. Five times higher chloramphenicol removal rate (0.71 d^-1) and two times higher chloramphenicol removal efficiency (100%) was achieved. Fe₃O₄ and MnO₂ nanoparticles highly increased the current density and NADH-quinone oxidoreductase expression. Fe₃O₄ nanoparticles enhanced the expression of alcohol dehydrogenase and c-type cytochrome, while MnO₂ nanoparticles increased the transcription of pyruvate dehydrogenase and Type IV pili assembly genes. Chloramphenicol was reduced to a type of dichlorination reducing product named CPD3 which is a benzene ring containing compound. Collectively, Fe₃O₄ and MnO₂ nanoparticles increased the chloramphenicol removal capacity in MFCs by enhancing electron transfer efficiency. This study provides new enhancing strategies for the bioremediation of chloramphenicol in the environments.

In-situ formation/decomposition of deep eutectic solvent during solidification of floating organic droplet-liquid-liquid microextraction method for the extraction of some antibiotics from honey prior to high performance liquid chromatography-tandem mass spectrometry

A new liquid-liquid microextraction approach by applying a deep eutectic solvent was adopted for the extraction of four antibiotics (penicillin G, dihydrostreptomycin, enrofloxacin, and ciprofloxacin) from honey samples. The enriched analytes were analyzed by HPLC-MS/MS. The procedure was carried out by synthesis of tetrabutylammonium chloride: p-cresol deep eutectic solvent in the sample solution and then its decomposition in the presence of an acid. In-solution formation of deep eutectic solvent provided wide contact areas among the extractant and sample solution, and accelerated sample preparation. Also, its decomposition enabled collection of the final extraction phase without centrifugation. Low LODs (0.55-0.79 ng/g) and LOQs (1.9-2.6 ng/g), high ERs (70-92%), and suitable RSDs (≤ 6.9%) were obtained. After performing the method on real samples, dihydrostreptomycin was found in several honey samples.

A review of the bioelectrochemical system as an emerging versatile technology for reduction of antibiotic resistance genes

Antibiotic contamination and the resulting resistance genes have attracted worldwide attention because of the extensive overuse and abuse of antibiotics, which seriously affects the environment as well as human health. Bioelectrochemical system (BES), a potential avenue to be explored, can alleviate antibiotic pollution and reduce antibiotic resistance genes (ARGs). This review mainly focuses on analyzing the possible reasons for the good performance of ARG reduction by BESs and potential ways to improve its performance on the basis of revealing the generation and transmission of ARGs in BES. This system reduces ARGs through two pathways: (1) the contribution of BES to the low selection pressure of ARGs caused by the efficient removal of antibiotics, and (2) inhibition of ARG transmission caused by low sludge yield. To promote the reduction of ARGs, incorporating additives, improving the removal rate of antibiotics by adjusting the environmental conditions, and controlling the microbial community in BES are proposed. Furthermore, this review also provides an overview of bioelectrochemical coupling systems including the BES coupled with the Fenton system, BES coupled with constructed wetland, and BES coupled with photocatalysis, which demonstrates that this method is applicable in different situations and conditions and provides inspiration to improve these systems to control ARGs. Finally, the challenges and outlooks are addressed, which is constructive for the development of technologies for antibiotic and ARG contamination remediation and blocking risk migration.

Ecological impact of antibiotics on bioremediation performance of constructed wetlands: Microbial and plant dynamics, and potential antibiotic resistance genes hotspots

Constructed wetlands (CWs) are nature-based solutions for treating domestic and livestock wastewater which may contain residual antibiotics concentration. Antibiotics may exert selection pressure on wetland's microbes, thereby increasing the global antibiotics resistance problems. This review critically examined the chemodynamics of antibiotics and antibiotics resistance genes (ARGs) in CWs. Antibiotics affected the biogeochemical cycling function of microbial communities in CWs and directly disrupted the removal efficiency of total nitrogen, total phosphorus, and chemical oxygen demand by 22%, 9.3%, and 24%, respectively. Since changes in microbial function and structure are linked to the emergence and propagation of antibiotic resistance, antibiotics could adversely affect microbial diversity in CWs. The cyanobacteria community seemed to be particularly vulnerable, while Proteobacteria could resist and persist in antibiotics contaminated wetlands. Antibiotics triggered excitation responses in plants and increased the root activities and exudates. Microbes, plants, and substrates play crucial roles in antibiotic removal. High removal efficiency was exhibited for triclosan (100%) > enrofloxacin (99.8%) > metronidazole (99%) > tetracycline (98.8%) > chlortetracycline (98.4%) > levofloxacin (96.69%) > sulfamethoxazole (91.9%) by the CWs. This review showed that CWs exhibited high antibiotics removal capacity, but the absolute abundance of ARGs increased, suggesting CWs are potential hotspots for ARGs. Future research should focus on specific bacterial response and impact on microbial interactions.

Bioenergy generation and nitrogen removal in a novel ecological-microbial fuel cell

A novel ecological-microbial fuel cell (E-MFC) was constructed based on the mutualistic symbiosis relationship among wetland plants Ipomoea aquatic, benthic fauna Tubifex tubifex (T. tubifex) and microorganisms. The maximum power densities of sediment MFC (S-MFC), wetland plant MFC (WP-MFC) and E-MFC were 6.80 mW/m², 10.60 mW/m² and 15.59 mW/m², respectively. Ipomoea aquatic roots secreted organic matter as electricigens' fuel for electricity generation, while T. tubifex decomposed decaying leaves and roots into soluble organic matter and plant nutrients, forming a co-dependent and mutually beneficial system, which was conducive to bioelectricity production. The E-MFC obtained the highest nitrogen removal, and the removal efficiencies of NH₄⁺-N and NO₃^--N were 90.4% and 96.5%, respectively. Hydraulic retention time (HRT), cathodic aeration and T. tubifex abundance had significant effects on E-MFC power generation. The performeance boost of E-MFC was closely related to anodic microbial community change caused by the introduction of T. tubifex.

Removal of sulfamethoxazole and tetracycline in constructed wetlands integrated with microbial fuel cells influenced by influent and operational conditions

Constructed wetlands integrated with microbial fuel cells (MFC-CWs) have been recently developed and tested for removing antibiotics. However, the effects of carbon source availability, electron transfer flux and cathode conditions on antibiotics removal in MFC-CWs through co-metabolism remained unclear. In this study, four experiments were conducted in MFC-CW microcosms to investigate the influence of carbon source species and concentrations, external resistance and aeration duration on sulfamethoxazole (SMX) and tetracycline (TC) removal and bioelectricity generation performance. MFC-CWs supplied with glucose as carbon source outperformed other carbon sources, and moderate influent glucose concentration (200 mg L^-1) resulted in the best removal of both SMX and TC. Highest removal percentages of SMX (99.4%) and TC (97.8%) were obtained in MFC-CWs with the external resistance of 700 Ω compared to other external resistance treatments. SMX and TC removal percentages in MFC-CWs were improved by 4.98% and 4.34%, respectively, by increasing the aeration duration to 12 h compared to no aeration. For bioelectricity generation performance, glucose outperformed sodium acetate, sucrose and starch, with the highest voltages of 386 ± 20 mV, maximum power density (MPD) of 123.43 mW m^-3, and coulombic efficiency (CE) of 0.273%. Increasing carbon source concentrations from 100 to 400 mg L^-1, significantly (p < 0.05) increased the voltage and MPD, but decreased the internal resistance and CE. The highest MPD was obtained when the external resistance (700 Ω) was close to the internal resistance (600.11 Ω). Aeration not only improved the voltage and MPD, but also reduced the internal resistance. This study demonstrates that carbon source species and concentrations, external resistances and aeration duration, all play vital roles in regulating SMX and TC removal in MFC-CWs.