Microplastic pollution in the Weser estuary and the German North Sea

Unveiling high concentrations of small microplastics (11-500 μm) in surface water samples from the southern Weddell Sea off Antarctica

Recent studies have highlighted the prevalence of microplastic (MP) pollution in the global marine environment and these pollutants have been found to contaminate even remote regions, including the Southern Ocean south of the polar front. Previous studies in this region have mostly focused on MPs larger than 300 μm, potentially underestimating the extent of MP pollution. This study is the first to investigate MPs in marine surface waters south of the polar front, with a focus on small MPs 500-11 μm in size. Seventeen surface water samples were collected in the southern Weddell Sea using an in-house-designed sampling system. The analysis of the entire sample using micro-Fourier transform infrared spectroscopy (μFTIR) with focal plane array (FPA) detection revealed the presence of MPs in all samples, with the vast majority of the MPs detected being smaller than 300 μm (98.3 %). The mean concentration reached 43.5 (± 83.8) MPs m-3, with a wide range from 0.5 to 267.2 MPs m-3. The samples with the highest concentrations differed from the other samples in that they were collected north of the continental slope and the Antarctic Slope Current. Sea ice conditions possibly also influenced these varying concentrations. This study reports high concentrations of MPs compared to other studies in the region. It emphasizes the need to analyze small MPs, down to a size of 11 μm or even smaller, in the Antarctic Treaty Area to gain a more comprehensive understanding of MP pollution and its potential ecological impacts.

Analysing micro- and nanoplastics with cutting-edge infrared spectroscopy techniques: a critical review

The escalating prominence of micro- and nanoplastics (MNPs) as emerging anthropogenic pollutants has sparked widespread scientific and public interest. These minuscule particles pervade the global environment, permeating drinking water and food sources, prompting concerns regarding their environmental impacts and potential risks to human health. In recent years, the field of MNP research has witnessed the development and application of cutting-edge infrared (IR) spectroscopic instruments. This review focuses on the recent application of advanced IR spectroscopic techniques and relevant instrumentation to analyse MNPs. A comprehensive literature search was conducted, encompassing articles published within the past three years. The findings revealed that Fourier transform infrared (FTIR) spectroscopy stands as the most used technique, with focal plane array FTIR (FPA-FTIR) representing the cutting edge in FTIR spectroscopy. The second most popular technique is quantum cascade laser infrared (QCL-IR) spectroscopy, which has facilitated rapid analysis of plastic particles. Following closely is optical photothermal infrared (O-PTIR) spectroscopy, which can furnish submicron spatial resolution. Subsequently, there is atomic force microscopy-based infrared (AFM-IR) spectroscopy, which has made it feasible to analyse MNPs at the nanoscale level. The most advanced IR instruments identified in articles covered in this review were compared. Comparison metrics encompass substrates/filters, data quality, spatial resolution, data acquisition speed, data processing and cost. The limitations of these IR instruments were identified, and recommendations to address these limitations were proposed. The findings of this review offer valuable guidance to MNP researchers in selecting suitable instrumentation for their research experiments, thereby facilitating advancements in research aimed at enhancing our understanding of the environmental and human health risks associated with MNPs.

How many microplastics do you need to (sub)sample?

Analysis of microplastics in the environment requires polymer characterization as a confirmation step for suspected microplastic particles found in a sample. Material characterization is costly and can take a long time per particle. When microplastic particle counts are high, many researchers cannot characterize every particle in their sample due to time or monetary constraints. Moreover, characterizing every particle in samples with high plastic particle counts is unnecessary for describing the sample properties. We propose an a priori approach to determine the number of suspected microplastic particles in a sample that should be randomly subsampled for characterization to accurately assess the polymer distribution in the environmental sample. The proposed equation is well-founded in statistics literature and was validated using published microplastic data and simulations for typical microplastic subsampling routines. We report values from the whole equation but also derive a simple way to calculate the necessary particle count for samples or subsamples by taking the error to the power of negative two. Assuming an error of 0.05 (5 %) with a confidence interval of 95 %, an unknown expected proportion, and a sample with many particles (> 100k), the minimum number of particles in a subsample should be 386 particles to accurately characterize the polymer distribution of the sample, given the particles are randomly characterized from the full population of suspected particles. Extending this equation to simultaneously estimate polymer, color, size, and morphology distributions reveals more particles (620) would be needed in the subsample to achieve the same high absolute error threshold for all properties. The above proposal for minimum subsample size also applies to the minimum count that should be present in samples to accurately characterize particle type presence and diversity in a given environmental compartment.

The seasonal distribution of plasticizers in estuarine system: Controlling factors, storage and impact on the ecosystem

Plasticizers such as phthalate esters (PAEs) are commonly used in various consumer and industrial products. This widespread use raises valid concerns regarding their ubiquity in the environment and potential negative impacts. The present study investigates the distribution of eight common plasticizers in the largest European lagoon (Curonian Lagoon) located in the SE Baltic Sea. The concentration levels of plasticizers in the water column, containing both the dissolved and particulate-bound phases, and in sediments were evaluated to reveal seasonal patterns in distribution and potential effects on the lagoon ecosystem. A total of 24 water samples and 48 sediment samples were collected across all four seasons from the two dominant sedimentary areas within the lagoon. The average concentration of total PAEs in the water column ranged from 1 to 21 μg L-1, whereas sediment concentration varied from 5.0 to 250 ng g-1. The distribution of plasticizers was influenced by the patterns in hydrodynamics and water circulation within the lagoon. The confined south-central area contained a higher amount of PAEs in sediments, accounting for most of the lagoon's plasticizer accumulation. More than 7 tons of plasticizers are stored in the 5 upper centimetres of sediment, with over 3 tons persisting for more than five years. Di(2-ethylhexyl) phthalate (DEHP), Diisobutyl phthalate (DiBP), and Dibutyl phthalate (DnBP) were the most abundant PAE congeners, with DEHP posing the highest risk quotient to algae, based on water column concentration. Several other congeners demonstrated medium to high-risk levels for organisms living in the lagoon.

Generation of macro- and microplastic databases by high-throughput FTIR analysis with microplate readers

FTIR spectral identification is today's gold standard analytical procedure for plastic pollution material characterization. High-throughput FTIR techniques have been advanced for small microplastics (10-500 µm) but less so for large microplastics (500-5 mm) and macroplastics (> 5 mm). These larger plastics are typically analyzed using ATR, which is highly manual and can sometimes destroy particles of interest. Furthermore, spectral libraries are often inadequate due to the limited variety of reference materials and spectral collection modes, resulting from expensive spectral data collection. We advance a new high-throughput technique to remedy these problems using FTIR microplate readers for measuring large particles (> 500 µm). We created a new reference database of over 6000 spectra for transmission, ATR, and reflection spectral collection modes with over 600 plastic, organic, and mineral reference materials relevant to plastic pollution research. We also streamline future analysis in microplate readers by creating a new particle holder for transmission measurements using off-the-shelf parts and fabricating a nonplastic 96-well microplate for storing particles. We determined that particles should be presented to microplate readers as thin as possible due to thick particles causing poor-quality spectra and identifications. We validated the new database using Open Specy and demonstrated that additional transmission and reflection spectra reference data were needed in spectral libraries.

Vertical distribution and risk assessment of pharmaceuticals and other micropollutants in southern North Sea coastal waters

Pharmaceutical compounds are micropollutants of emerging concern, as well as other classes of chemicals such as UV filters and artificial sweeteners. They enter marine environments via wastewater treatment plants, aquaculture runoff, hospital effluents, and shipping activities. While many studies have investigated the presence and distribution of these pollutants in numerous coastal areas, our study is the first to focus on their occurrence, spatial distribution, and vertical distribution in the sea surface microlayer (SML) and the near-surface layer of marine environments. We analyzed 62 pharmaceutical compounds, one UV filter, and six artificial sweeteners from the SML to the corresponding underlying water (0 cm, 20 cm, 50 cm, 100 cm, and 150 cm) at four stations in the southern North Sea. One station is the enclosed Jade Bay, one is the Weser estuary at Bremerhaven, and the other two stations (NS_7 and NS_8) are in the open German Bight. Jade Bay receives pollutants from surrounding wastewater treatment plants, while the Weser estuary receives pollutants from cities like Bremerhaven, which has dense populations and industrial activities. Concentrations of pharmaceutical compounds were higher in the upper water layers (from the SML to 20 cm). Eleven pharmaceutical compounds (caffeine, carbamazepine, gemfibrozil, ibuprofen, metoprolol, salicylic acid, clarithromycin, novobiocin, clindamycin, trimethoprim, and tylosin) were detected in >95 % of our samples. One UV filter (benzophenone-4) was found in 83 % and three artificial sweeteners (acesulfame, saccharin, and sucralose) in 100 % of all our samples. All artificial sweeteners posed high risks to the freshwater invertebrate Daphnia magna. Understanding the spatial and vertical distribution of pharmaceuticals and other micropollutants in marine environments may be essential in assessing their dispersal and detection in other aquatic environments.

Hydro-geomorphic perspectives on microplastic distribution in freshwater river systems: A critical review

Freshwater river systems are commonly defined as the main transport paths of microplastics (MP) from land into the seas. A shift in research interest from oceans to rivers can be observed, as a large number of i) case studies, ii) review papers and iii) experimental studies in this field have been published recently. Still, studies often lack an in-depth consideration of quantification, as units are mostly based on item numbers. Spatiotemporal aspects are often neglected. Transport paths linking MP sources and sinks in the environment are insufficiently understood and only recently the awareness increased that sustainable management of the MP pollution cannot be addressed without a sound knowledge of water- and sediment-driven MP transport. Within this review paper, we therefore i) reviewed 92 MP case-studies, with a special focus on spatiotemporal aspects and ii) gathered and compared global load-estimation data from these studies. We then outlined the key processes determining MP movement in rivers on the basis of existing laboratory experiments and theoretical approaches. A procedure to effectively compare units of MP in the water column and in riverine sediments was developed on the basis of i) an extensive MP-dataset in German waterways and ii) suspended sediment concentrations (SSC) of nearest monitoring stations of the German water and shipping authority. Our analysis indicates that relating MP in water samples to SSC reduces the often stated large difference between MP concentrations in the water column and bed sediments and therefore relativizes the importance of river beds as a major "MP sink". As for a quantification of MP fluxes, the use of MP masses as unit is crucial, we applied an approach to convert MP items to masses with the help of i) a power-law distribution of MP-particle size, triangular distributions of ii) form-ratios and iii) polymer densities. An evaluation with an own, extensive dataset of MP-particles showed reasonable results. Therefore, we translated global load data from item numbers to mass values for further analysis. Values were within a reasonable range, especially when considering the respective catchment size of each river at the sampling site.

Journey to the deep: plastic pollution in the hadal of deep-sea trenches

The global increase of plastic production, linked with an overall plastic misuse and waste mismanagement, leads to an inevitable increase of plastic debris that ends up in our oceans. One of the major sinks of this pollution is the deep-sea floor, which is hypothesized to accumulate in its deepest points, the hadal trenches. Little is known about the magnitude of pollution in these trenches, given the remoteness of these environments, numerous factors influencing the input and sinking behavior of plastic debris from shallower environments. This study represents to the best of our knowledge the largest survey of (macro)plastic debris sampled at hadal depths, down to 9600 m. Industrial packaging and material assignable to fishing activities were the most common debris items in the Kuril Kamchatka trench, most likely deriving from long-distance transport by the Kuroshio extension current (KE) or from regional marine traffic and fishing activities. The chemical analysis by (Attenuated Total Reflection Fourier transform infrared (ATR-FTIR) spectroscopy revealed that the main polymers detected were polyethylene (PE), polypropylene (PP) and nylon. Plastic waste is reaching the depths of the trench, although some of the items were only partially broken down. This finding suggests that complete breakdown into secondary microplastics (MP) may not always occur at the sea surface or though the water column. Due to increased brittleness, plastic debris may break apart upon reaching the hadal trench floor where plastic degrading factors were thought to be, coming off. The KKT's remote location and high sedimentation rates make it a potential site for high levels of plastic pollution, potentially making it one of the world's most heavily contaminated marine areas and an oceanic plastic deposition zone.

Identification of the driving factors of microplastic load and morphology in estuaries for improving monitoring and management strategies: A global meta-analysis

Estuaries are one of the primary pathways for transferring microplastics (MPs) from the land to the ocean. A comprehensive understanding of the load, morphological characteristics, driving factors, and potential risks of MPs in estuaries is imperative to inform reliable management in this critical transboundary area. Extracted from 135 publications, a global meta-analysis comprising 1477 observations and 124 estuaries was conducted. MP abundance in estuaries was tremendously variable, reaching a mean of 21,342.43 ± 122,557.53 items/m3 in water and 1312.79 ± 6295.73 items/kg in sediment. Fibers and fragments take up a majority proportion in estuaries. Polyester, polypropylene, and polyethylene are the most detected MP types. Around 68.73% and 85.51% of MPs detected in water and sediment are smaller than 1 μm. The redundancy analysis revealed that the explanatory factors influencing the morphological characteristics of MPs differed between water and sediment. Regression analysis shows that MP abundance in water is significantly inversely correlated with mesh/filter size, per capita plastic waste, and the Human Development Index, whereas it is significantly positively correlated with population density and share of global mismanaged plastic waste. MP abundance in sediment significantly positively correlated with aridity index and probability of plastic entering the ocean, while significantly negatively correlated with mesh/filter size. Analysis based on Geodector identified that the extraction method, density of flotation fluid, and sampling depth are the top three explanatory factors for MP abundance in water, while the share of global mismanaged plastic waste, the probability of plastic being emitted into the ocean, and population density are the top three explanatory factors for MP abundance in sediment. In the studied estuaries, 46.75% of the water and 2.74% of the sediment are categorized into extremely high levels of pollution, while 73.08% of the water and 43.48% of the sediment belong to class V of the potential ecological index.

Developing and testing a workflow to identify microplastics using near infrared hyperspectral imaging

The analysis of microplastics (MP) is time-consuming which limits our capacity to monitor and mitigate plastic pollution. Here, near infrared (1000-2500 nm) hyperspectral imaging (NIR-HSI) offers an advantage over other spectroscopic techniques because it can rapidly image large areas relative to other systems. While NIR-HSI can successfully detect MP, accuracy and limitations of the method have not been fully explored. In addition, lack of open databases and analysis pipelines increases the barrier to use. In this work, we developed a spectral database containing preproduction pellets, consumer products and marine plastic debris, imaged using a Hyspex SWIR-320me imager. A SIMCA model identified four polymer types: polypropylene, polyethylene, polyethylene terephthalate and polystyrene (PP, PE, PET, PS) to identify MP in hyperspectral images. We determined the accuracy of size estimates for PS MP > 1000 μm using fluorescence microscopy and tested the impact of photooxidation on detection of plastics by NIR-HSI (PE, PP, PS, PET) and subsequent prediction by the SIMCA model. The model performed well across all polymers as shown by high specificity, sensitivity, and accuracy for internal cross validation (>88%), and sensitivity >80% for external validation. PS MP < 500 μm Feret diameter were not consistently detected by NIR-HSI when compared with fluorescence microscopy. However, estimates for Feret diameter were consistent for PS MP > 1000 μm. Analysis by NIR-HSI showed no spectral changes and SIMCA showed no decreased precision with increased photooxidation across polymer types. Recall varied across polymer type and photooxidation stage with no clear trends. This study shows that NIR-HSI is a rapid method which can accurately identify MP of the four most relevant polymer types, precluding the need to analyze particles one at a time. NIR-HSI can be a key technology for environmental monitoring of plastic debris where rapid analysis of multiple samples is required.

The complexity of micro- and nanoplastic research in the genus Daphnia - A systematic review of study variability and a meta-analysis of immobilization rates

In recent years, the number of publications on nano- and microplastic particles (NMPs) effects on freshwater organisms has increased rapidly. Freshwater crustaceans of the genus Daphnia are widely used in ecotoxicological research as model organisms for assessing the impact of NMPs. However, the diversity of experimental designs in these studies makes conclusions about the general impact of NMPs on Daphnia challenging. To approach this, we systematically reviewed the literature on NMP effects on Daphnia and summarized the diversity of test organisms, experimental conditions, NMP properties and measured endpoints to identify gaps in our knowledge of NMP effects on Daphnia. We use a meta-analysis on mortality and immobilization rates extracted from the compiled literature to illustrate how NMP properties, study parameters and the biology of Daphnia can impact outcomes in toxicity bioassays. In addition, we investigate the extent to which the available data can be used to predict the toxicity of untested NMPs based on the extracted parameters. Based on our results, we argue that focusing on a more diverse set of NMP properties combined with a more detailed characterization of the particles in future studies will help to fill current research gaps, improve predictive models and allow the identification of NMP properties linked to toxicity.

Comparison of two rapid automated analysis tools for large FTIR microplastic datasets

One of the biggest issues in microplastic (MP, plastic items  <5 mm) research is the lack of standardisation and harmonisation in all fields, reaching from sampling methodology to sample purification, analytical methods and data analysis. This hampers comparability as well as reproducibility among studies. Concerning chemical analysis of MPs, Fourier-transform infrared (FTIR) spectroscocopy is one of the most powerful tools. Here, focal plane array (FPA) based micro-FTIR (µFTIR) imaging allows for rapid measurement and identification without manual preselection of putative MP and therefore enables large sample throughputs with high spatial resolution. The resulting huge datasets necessitate automated algorithms for data analysis in a reasonable time frame. Although solutions are available, little is known about the comparability or the level of reliability of their output. For the first time, within our study, we compare two well-established and frequently applied data analysis algorithms in regard to results in abundance, polymer composition and size distributions of MP (11-500 µm) derived from selected environmental water samples: (a) the siMPle analysis tool (systematic identification of MicroPlastics in the environment) in combination with MPAPP (MicroPlastic Automated Particle/fibre analysis Pipeline) and (b) the BPF (Bayreuth Particle Finder). The results of our comparison show an overall good accordance but also indicate discrepancies concerning certain polymer types/clusters as well as the smallest MP size classes. Our study further demonstrates that a detailed comparison of MP algorithms is an essential prerequisite for a better comparability of MP data.

Pelagic microplastics in the North Pacific Subtropical Gyre: A prevalent anthropogenic component of the particulate organic carbon pool

Due to its ever-increasing ocean inputs, fossil-based microplastics (MP) comprise a considerable constituent in the particulate organic carbon (POC) pool, which is instrumental in ocean biogeochemical cycling. Their distribution within the oceanic water column and the underpinning processes, however, remain unclear. Here we show that MP prevail throughout the water column of the eastern North Pacific Subtropical Gyre, comprising 334 #/m3 (84.5% of plastic particles &lt;100 µm), with exponential relationships between concentrations and water depth in the upper 500-m layer and marked accumulation below this layer. Our results suggest that the biological carbon pump (BCP) strongly contributes to the water column MP redistribution in terms of polymer type, material density and particle size, which in turn could influence the efficiency of organic matter export to the deep sea. We further show that 14C-depleted plastic particles predictably are an emerging nonneglectable perturbation to radiocarbon signatures in the deep ocean through depletion of the 14C/C ratio in the POC pool. Our data provide insight into vertical MP flux and highlight the potential role of MP in alternating the marine particulate pool and interactions with the BCP.

Numerical modeling of microplastic interaction with fine sediment under estuarine conditions

Microplastic (MP) pollution is an important challenge for human life which has consequently affected the natural system of other organisms. Mismanagement and also careless handling of plastics in daily life has led to an accelerating contamination of air, water and soil compartments with MP. Under estuarine conditions, interactions with suspended particulate matter (SPM) like fine sediment in the water column play an important role on the fate of MP. Further studies to better understand the corresponding transport and accumulation mechanisms are required. This paper aims at providing a new modeling approach improving the MP settling velocity formulation based on higher suspended fine sediment concentrations, as i.e. existent in estuarine turbidity zones (ETZ). The capability of the suggested approach is examined through the modeling of released MP transport in water and their interactions with fine sediment (cohesive sediment/fluid mud). The model results suggest higher concentrations of MP in ETZ, both in the water column as well as the bed sediment, which is also supported by measurements. The key process in the modeling approach is the integration of small MP particles into estuarine fine sediment aggregates. This is realized by means of a threshold sediment concentration, above which the effective MP settling velocity increasingly approaches that of the sediment aggregates. The model results are in good agreement with measured MP mass concentrations. Moreover, the model results also show that lighter small MP particles can easier escape the ETZ towards the open sea.

Microplastic contamination in seawater across global marine protected areas boundaries

Despite the relatively rich literature on the omnipresence of microplastics in marine environments, the current status and ecological impacts of microplastics on global Marine Protected Areas (MPAs) are still unknown. Their ubiquitous occurrence, increasing volume, and ecotoxicological effects have made microplastic an emerging marine pollutant. Given the critical conservation roles of MPAs that aim to protect vulnerable marine species, biodiversity, and resources, it is essential to have a comprehensive overview of the occurrence, abundance, distribution, and characteristics of microplastics in MPAs including their buffer zones. Here, extensive data were collected and screened based on 1565 peer-reviewed literature from 2017 to 2020, and a GIS-based approach was applied to improve the outcomes by considering boundary limits. Microplastics in seawater samples were verified within the boundaries of 52 MPAs; after including the buffer zones, 1/3 more (68 MPAs) were identified as contaminated by microplastics. A large range of microplastic levels in MPAs was summarized based on water volume (0-809,000 items/m³) or surface water area (21.3-1,650,000,000 items/km²), which was likely due to discrepancy in sampling and analytical methods. Fragment was the most frequently observed shape and fiber was the most abundant shape. PE and PP were the most common and also most abundant polymer types. Overall, 2/3 of available data reported that seawater microplastic levels in MPAs were higher than 12,429 items/km², indicating that global MPAs alone cannot protect against microplastic pollution. The current limitations and future directions were also discussed toward the post-2020 Global Biodiversity Framework goals.

A monitoring and data analysis method for microplastics in marine sediments

In Europe, policy frameworks demand the monitoring of microplastics in marine sediments. Here we provide a monitoring and data analysis method for microplastic particles designed to be used in the context of Marine Strategy Framework Directive (MSFD) and OSPAR policy frameworks. Microplastics were analysed in marine sediments at four different locations in Dutch coastal and transitional waters using replicate sampling to investigate micro-spatial variation. Particle size distribution followed a power law with slope 3.76. Thirteen polymers were identified, with their composition varying between sediments near densely populated West coast areas versus the more rural Wadden Sea area. We quantify differences in the micro-spatial variation of microplastic concentrations between locations using the relative standard error of the mean (RSEM). This metric provides an opportunity to optimize the sensitivity of trend detection in microplastic monitoring networks by selecting locations with relatively low micro-spatial variation. We provide a method to optimize the number of replicate samples for a given location using its relationship with the RSEM. Two replicate samples appear to be cost-effective for relatively homogenous locations, whereas more heterogenous locations require four replicates.

No evidence of microplastic ingestion in emperor penguin chicks (Aptenodytes forsteri) from the Atka Bay colony (Dronning Maud Land, Antarctica)

Microplastic (<5 mm; MP) pollution has been an emerging threat for marine ecosystems around the globe with increasing evidence that even the world's most remote areas, including Antarctica, are no longer unaffected. Few studies however, have examined MP in Antarctic biota, and especially those from Antarctic regions with low human activity, meaning little is known about the extent to which biota are affected. The aim of this study was to investigate, for the first time, the occurrence of MP in the emperor penguin (Aptenodytes forsteri), the only penguin species breeding around Antarctica during the austral winter, and an endemic apex predator in the Southern Ocean. To assess MP ingestion, the gizzards of 41 emperor penguin chicks from Atka Bay colony (Dronning Maud Land, Antarctica), were dissected and analyzed for MP >500 μm using Attenuated Total Reflection Fourier-transform Infrared (ATR-FTIR) spectroscopy. A total of 85 putative particles, mostly in the shape of fibers (65.9 %), were sorted. However, none of the particles were identified as MP applying state-of-the-art methodology. Sorted fibers were further evidenced to originate from contamination during sample processing and analyses. We find that MP concentrations in the local food web of the Weddell Sea and Dronning Maud Land coastal and marginal sea-ice regions; the feeding grounds to chick-rearing emperor penguin adults, are currently at such low levels that no detectable biomagnification is occurring via trophic transfer. Being in contrast to MP studies on other Antarctic and sub-Antarctic penguin species, our comparative discussion including these studies, highlights the importance for standardized procedures for sampling, sample processing and analyses to obtain comparable results. We further discuss other stomach contents and their potential role for MP detection, as well as providing a baseline for the long-term monitoring of MP in apex predator species from this region.

Theoretical investigation on the interactions of microplastics with a SARS-CoV-2 RNA fragment and their potential impacts on viral transport and exposure

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes the coronavirus disease-19 (COVID-19) pandemic spread across the world and remains difficult to control. Environmental pollution and habitat conditions do facilitate SARS-CoV-2 transmission as well as increase the risk of exposure to SARS-CoV-2. The coexistence of microplastics (MPs) with SARS-CoV-2 affects the viral behavior in the indoor and outdoor environment, and it is essential to study the interactions between MPs and SARS-CoV-2 because they both are ubiquitously present in our environment. To determine the mechanisms underlying the impact of MPs on SARS-CoV-2, we used molecular dynamic simulations to investigate the molecular interactions between five MPs and a SARS-CoV-2 RNA fragment at temperatures ranging from 223 to 310 K in vacuum and in water. We furthermore compared the interactions of MPs and SARS-CoV-2 RNA fragment to the performance of SARS-CoV-1 and Hepatitis B virus (HBV) RNA fragments in interacting with the MPs. The interaction affinity between the MPs and the SARS-CoV-2 RNA fragment was found to be greater than the affinity between the MPs and the SARS-CoV-1 or HBV RNA fragments, independent of the environmental media, temperature, and type of MPs. The mechanisms of the interaction between the MPs and the SARS-CoV-2 RNA fragment involved electrostatic and hydrophobic processes, and the interaction affinity was associated with the inherent structural parameters (i.e., molecular volume, polar surface area, and molecular topological index) of the MPs monomers. Although the evidence on the infectious potential of SARS-CoV-2 RNA is not fully understood, humans are exposed to MPs via their lungs, and the strong interaction with the gene materials of SARS-CoV-2 likely affects the exposure of humans to SARS-CoV-2.

Human footprints at hadal depths: interlayer and intralayer comparison of sediment cores from the Kuril Kamchatka trench

Microplastic (MP) pollution affects almost all ecosystems on Earth. Given the increasing plastic production worldwide and the durability of these polymers, concerns arise about the fate of this material in the environment. A candidate to consider as a depositional final sink of MP is the sea floor and its deepest representatives, hadal trenches, as ultimate sinks. In this study, 13 sediment samples were collected with a multiple-corer at depths between 5740 and 9450 m from the Kuril Kamchatka trench (KKT), in the Northwest (NW) Pacific Ocean. These samples were analysed for MP presence in the upper sediment layer, by slicing the first 5 cm of sediment cores into 1 cm horizontal layers. These were compared against each other and between the sampling areas, in order to achieve a detailed picture of the depositional system of the trench and small-scale perturbations such as bioturbation. The analyses revealed the presence of 215 to 1596 MP particles per kg ^-1 sediment (dry weight), with a polymer composition represented by 14 polymer types and the prevalence of particles smaller than 25 μm. A heterogeneous microplastic distribution through the sediment column and different microplastic concentration and polymer types among sampling stations located in different areas of the trench reflects the dynamics of this environment and the numerous forces that drive the deposition processes and the in situ recast of this pollutant at the trench floor.

Microplastic pollution in fragile coastal ecosystems with special reference to the X-Press Pearl maritime disaster, southeast coast of India

Microplastics (MPs) are a global environmental concern and pose a serious threat to marine ecosystems. This study aimed to determine the abundance and distribution of MPs in beach sediments (12 beaches), marine biota (6 beaches) and the influence of microbes on MPs degradation in eco-sensitive Palk Bay and Gulf of Mannar coast. The mean MP abundance 65.4 ± 39.8 particles/m² in beach sediments; 0.19 ± 1.3 particles/individual fish and 0.22 ± 0.11 particles g^-1 wet weight in barnacles. Polyethylene fragments (33.4%) and fibres (48%) were the most abundant MPs identified in sediments and finfish, respectively. Histopathological examination of fish has revealed health consequences such as respiratory system damage, epithelial degradation and enterocyte vacuolization. In addition, eight bacterial and seventeen fungal strains were isolated from the beached MPs. The results also indicated weathering of MPs due to microbial interactions. Model simulations helped in tracking the fate and transboundary landfall of spilled MPs across the Indian Ocean coastline after the X-Press Pearl disaster. Due to regional circulations induced by the monsoonal wind fields, a potential dispersal of pellets has occurred along the coast of Sri Lanka, but no landfall and ecological damage are predicted along the coast of India.

30 years trends of microplastic pollution: Mass-quantitative analysis of archived mussel samples from the North and Baltic Seas

Microplastics (MP) are ubiquitous throughout the environment as a result of an ongoing, increasing, but also lavish use, of plastics over time and its inherent persistence. In contrast, there are almost no data that allow drawing conclusions about the evolution of plastic pollution in the environment over the past decades. This study investigates the MP load in blue mussels from the North and Baltic Sea archived by the German Environmental Specimen Bank in a time series covering almost 30 years. Samples were enzymatically and chemically oxidative digested for MP extraction and subsequent analyzed mass-quantitatively for nine common polymer clusters by pyrolysis gas chromatography-mass spectrometry. Seven polymer clusters were detected in mussel tissue. Summed MP levels were at ppm levels (<20 μg/g mussel, dry weight). North Sea samples reflected a gradual increase from the 1980s/90s to the 2000s whereas those from Baltic Sea showed consistently higher, rather constant MP levels similar to the North Sea site later than 2000. Polymer composition of both sites stood out by cluster (C) of C-PVC and C-PET at both sites. Mussels from Baltic Sea site had larger C-PE and C-PP proportions. Opposed polymer- and site-specific trends indicated both regional and trans-regional MP sources for different polymer clusters. The MP composition of mussels showed strong similarities with adjacent sediment and water samples. The study introduces a relevant dataset addressing the temporal development of MP pollution. It emphasizes a high indicative potential of environmental MP composition/loads received by mussels but raises the necessity on adequate control materials accompany such kind of studies.

Tracing microplastics from raw water to drinking water treatment plants in Busan, South Korea

The increasing amount of plastic waste has raised concerns about microplastics (MPs) in aquatic environments. MPs can be fragmented into nanoplastics that can pass through water treatment processes and into tap water; potentially threatening human health because of their high adsorption capacity for hazardous organic materials and their intrinsic toxicity. This case study investigates the identification, fate, and removal efficiency of MPs in Korean drinking water treatment plants. Two sites on the Nakdong River, two lake reservoirs (raw water sources), and four corresponding drinking water treatment plants were targeted to trace the amounts, types, and sizes of MPs throughout the treatment process. Monthly quantitative and qualitative analyses were conducted by chemical image mapping using micro-Fourier-transform infrared spectroscopy. MPs larger than 20 μm were detected, and their sizes and types were quantified using siMPle software. Overall, the number of MPs in the river sites (January to April and October to November) exceeded those in the reservoirs, but only slight differences in the number of MPs between rivers and lake reservoirs were detected from June to October. The annual average number of MPs in River A, B and Lack C and D was not distinctively different (2.65, 2.48, 2.46 and 1.87 particles/L, respectively). The majority of MPs found in raw waters were polyethylene (PE)/polypropylene (PP) (> 60%) and polyethylene terephthalate (PET)/poly(methyl methacrylate) (PMMA) (20%), in addition to polyamide (<10%) in the river and polystyrene (<10%) in the lake reservoirs. Approximately 70-80% of the MPs were removed by pre-ozonation/sedimentation; 81-88% of PE/PP was removed by this process. PET/PMMA was removed by filtration. Correlation of MPs with water quality parameters showed that the Mn concentration was moderately correlated with the MP abundance in rivers and lake reservoirs, excluding the lake with the lowest Mn concentration, while the total organic carbon was negatively correlated with the MP abundance in both rivers (A and B) and lake reservoir C.

Fishing in troubled waters: Limited stress response to natural and synthetic microparticles in brown shrimp (Crangon crangon)

Marine invertebrates inhabiting estuaries and coastal areas are exposed to natural suspended particulate matter (SPM) like clay or diatom shells but also to anthropogenic particles like microplastics. SPM concentrations may reach 1 g per liter and more, comprising hundreds of millions of items in the size range of less than 100 μm. Suspension feeders and deposit feeders involuntarily ingest these particles along with their food. We investigated whether natural and anthropogenic microparticles at concentrations of 20 mg L^-1, which correspond to natural environmental SPM concentrations in coastal marine waters, are ingested by the brown shrimp Crangon crangon and whether these particles induce an oxidative stress response in digestive gland tissue. Shrimp were exposed to clay, silica, TiO₂, polyvinyl chloride (PVC), or polylactide microplastics (PLA) for 6, 12, 24, and 48 h, respectively. The activities of the anti-oxidative enzymes superoxide dismutase (SOD), glutathione peroxidase (GPx), and glutathione reductase (GR) were measured. All five particle types were ingested by the shrimp along with food. The presence of the particles in the shrimp stomach was verified by scanning electron microscopy. The activities of the anti-oxidative enzymes did not vary between animals exposed to different types of microparticles and control animals that did not receive particles. The temporal activity differed between the three enzymes. The lack of a specific biochemical response may reflect an adaptation of C. crangon to life in an environment where frequent ingestion of non-digestible microparticles is unavoidable and continuous maintenance of inducible biochemical defense would be energetically costly. Habitat characteristics as well as natural feeding habits may be important factors to consider in the interpretation of hazard and species-specific risk assessment.

Microplastics in two German wastewater treatment plants: Year-long effluent analysis with FTIR and Py-GC/MS

Microplastics (MP) have been recorded in various environments around the globe. For a better understanding of distribution patterns and for providing a basis for risk assessments, detailed data on MP concentrations and polymer compositions are required. This study investigated the effluents of two German wastewater treatment plants (WWTP) monthly over one year, in order to better understand their temporal input of MP into the receiving river systems. MP item data down to 11 μm were obtained by means of Fourier Transform Infrared (FTIR) spectroscopy under the application of an improved polymer database. Complementary mass data were obtained by pyrolysis gas chromatography-mass spectrometry (Py-GC/MS) (for one WWTP). Both FTIR and Py-GC/MS analysis revealed a homogeneous polymer composition over the year, with a general dominance of polyolefins. Elevated MP item and mass concentrations (maximum: 3 × 10⁴ items m^-3 and 3.8 × 10³ μg m^-3) were observed during winter months and were accompanied by either heavy rainfall (increased discharge and total organic carbon) or elevated turbidity values. These observations emphasize the need for the assessment of background parameters in future MP monitoring studies. By providing monthly data over one year on MP items and masses in WWTP effluents, this study helps enhancing the understanding of temporal MP dynamics and can act as a valuable reference point for future assessments.