Remediation of heavy metal contaminated soil by biodegradable chelator-induced washing: Efficiencies and mechanisms

MGDA-assisted plant washing agent for improving the removal of Cd and Cu from farmland soils

Utilizing plant extracts for soil washing is a promising and cost-efficient strategy to permanently remove toxic metals from farmland soils. However, the efficiency of current plant extracts in heavy metals removal is constrained by the need of excessively high liquid-solid ratios (>10:1), which limits their practical application in the farmland soils. To address this challenge, we developed a novel binary washing agent consisting of Fructus mume residue extract (RPM) and methylglycinediacetate acid (MGDA). Through optimization experiments, we determined an optimal composition of 50 g L-1 RPM and 0.34 g L-1 MGDA (RPMG3), which exhibited a remarkable synergistic effect on the removal of Cd and Cu from two polluted farmland soils. Compared to the single use of RPM or MGDA, RPMG3 increased metal removal efficiency by 44.6%-303.8% in the alkaline dryland soil and 55.8%-141.9% in the slightly acidic paddy soil, at an optimum liquid-solid ratio of 2:1. The contents of soil Cd and Cu can be reduced to below the risk screening values via acid activation, metal ion exchange, and complexation of functional groups. Moreover, the potential ecological risks associated with Cd in the soils were significantly mitigated due to the decrease in exchangeable and reducible Cd fractions following RPMG3 washing. Additionally, RPM and RPMG3 washing led to enhancements in soil organic carbon and nutrient concentrations, as well as increased activities of soil enzymes including catalase, urease, and β-glucosidase. Notably, RPMG3 washing exhibited the most pronounced promotion effect on wheat seed germination and growth. Taken together, the binary complex of RPMG3 demonstrates potential as an environmentally friendly green washing agent capable of in reducing heavy metals from farmland soil with great efficiency, even at low liquid-solid ratios.

Remediation of cadmium contaminated soil using electrokinetic-phytoremediation system with rotary switching electrodes

Considering both electrokinetic remediation and phytoremediation have limitations, an electrokinetic phytoremediation (EP) system was constructed to obtain efficient and environmentally friendly remediation results. This study indicates that the electric field can promote the absorption of Cd by ryegrass with little impact on soil physicochemical properties under the condition of rotary switching electrodes, and the accumulation of Cd in the aboveground and underground parts of ryegrass increased by 145.2% and 93.7%, respectively. The DC electric field combined with ryegrass under rotary switching electrode mode proved to be the optimal condition for the remediation of Cd contaminated soil with a remediation efficiency of 66.7%. Moreover, the rotary switching of the electrodes alleviated the suppression of the growth of ryegrass by the DC electric field. During the EP remediation process, the electric field promoted the transformation of the residue state of Cd to the other forms, which accelerated the desorption rate of Cd from the soil and facilitated the migration of Cd into plants. In conclusion, EP is a green and efficient remediation technology for heavy metal contaminated soil with good application prospects.

Emerging technologies for the removal of pesticides from contaminated soils and their reuse in agriculture

Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large-scale.

Bio-chelate assisted leaching for enhanced heavy metal remediation in municipal solid waste compost

Municipal solid waste compost, the circular economy's closed-loop product often contains excessive amounts of toxic heavy metals, leading to market rejection and disposal as waste material. To address this issue, the study develops a novel approach based on: (i) utilizing plant-based biodegradable chelating agent, L-glutamic acid, N,N-diacetic acid (GLDA) to remediate heavy metals from contaminated MSW compost, (ii) comparative assessment of GLDA removal efficiency at optimal conditions with conventional nonbiodegradable chelator EDTA, and (iii) enhanced pre- and post-leaching to evaluate the mobility, toxicity, and bioavailability of heavy metals. The impact of treatment variables, such as GLDA concentration, pH, and retention time, on the removal of heavy metals was investigated. The process was optimized using response surface methodology to achieve the highest removal effectiveness. The findings indicated that under optimal conditions (GLDA concentration of 150 mM, pH of 2.9, retention time for 120 min), the maximum removal efficiencies were as follows: Cd-90.32%, Cu-81.96%, Pb-91.62%, and Zn-80.34%. This process followed a pseudo-second-order kinetic equation. Following GLDA-assisted leaching, the geochemical fractions were studied and the distribution highlighted Cd, Cu, and Pb's potential remobilization in exchangeable fractions, while Zn displayed integration with the compost matrix. GLDA-assisted leaching and subsequent fractions illustrated transformation and stability. Therefore, this process could be a sustainable alternative for industrial applications (agricultural fertilizers and bioenergy) and social benefits (waste reduction, urban landscaping, and carbon sequestration) as it has controlled environmental footprints. Hence, the proposed remediation strategy, chemically assisted leaching, could be a practical option for extracting heavy metals from MSW compost, thereby boosting circular economy.

Available heavy metals concentrations in agricultural soils: Relationship with soil properties and total heavy metals concentrations in different industries

Heavy metal (HM) pollution in agricultural soils has arisen sharply in recent years. However, the impact of main factors on available HMs concentrations in agricultural soils of the three main industries (smelting, chemical and mining industry) is unclear. Herein, soil properties (pH, cation exchange capacity (CEC) and texture (sand, slit, clay)), total and available concentrations were concluded based on the results of 165 research papers from 2000 to 2023 in Web of Science database. In the three industries, the correlation and redundancy analysis were used to study the correlation between main factors and available concentrations, and quantitatively analyzed the contribution of each factor to available concentrations with gradient boosting decision tree model. The results showed that different factors had varying degrees of impact on available metals in the three main industries, and the importance of same factors varied in each industry, as for soil pH, it was most important for available Pb and Zn in the chemical industry, but the total concentrations were most important in the smelting and mining industry. There was no significant correlation between total and available concentrations. Soil properties involved in this paper (especially soil pH) were negatively correlated with available concentrations. This study provides effective guidance for the formulation of soil pollution control and risk assessment standards based on industry classification in the three major industrial impact areas.

High-efficiency combination washing agents with eco-friendliness simultaneously removing Cd, Cu and Ni from soil of e-waste recycling site: A lab-scale experiment

Soil washing technology plays an important role in the removal of heavy metals, and the efficacy of this process depends on the washing agent used. Due to the difficulty in treating soils contaminated by multiple heavy metals, there is still a need for further exploration of efficient washing agents with low environmental impact. Although single washing agents, such as chelators, can also effectively remove heavy metals from soil, combining efficient washing agents and determining their optimal washing conditions can effectively improve their removal efficiency for multiple heavy metals in soil simultaneously. Based on the previous research, the present study was carried out to combine different types of washing agents to remediate contaminated soils at a commonly e-waste recycling site. The objectives were to investigate their efficient washing conditions and assess the impact of the washing process on the speciation distribution and pollution level associated with heavy metals in soil. The results showed that the combination of HEDP (1-hydroxyethylidene-1,1-diphosphonic acid) and FeCl3 at a ratio of 6:4 exhibited the most effective removal of Cd, Cu and Ni from the contaminated soil at an e-waste recycling site. Under optimal washing conditions, with a soil-to-liquid ratio of 1:20 and a washing time of 48 h, the removal rates of Cd, Cu and Ni were 96.72%, 69.91% and 76.08%, respectively. It needed to be emphasized that the combination washing agents were able to remove most of the acid-soluble, reducible and oxidizable fractions of heavy metals, and even the removal rates of the stable residual fraction (e.g., of Cd) was at a relatively high level. In addition, the washing process significantly reduced the pollution level associated with heavy metals in soil. This study aid in the development of combined efficient washing agents and explores optimal washing strategies for the remediation of Cd, Cu, and Ni-contaminated soil at e-waste recycling sites. The findings may play a role in enhancing the remediation capabilities for soils contaminated with multiple heavy metals, due to its characteristics of and high-efficiency and environmental friendliness.

Remediation of cadmium-contaminated soil: GLDA-assisted extraction and sequential FeCl3-CaO-based post-stabilization

Cadmium (Cd) contamination of farmland soils is a growing concern because of its highly toxic impact on ecosystems and human health. Chelator-assisted washing and chemical immobilization are effective remediation strategies for Cd-contaminated soils. Ethylenediaminetetraacetic acid (EDTA) has traditionally been used for soil washing, but its persistence in the environment and subsequent toxicity have raised significant ecological concerns. Consequently, biodegradable chelators have gained increasing attention as eco-friendly alternatives to the persistent chelator, EDTA. Therefore, this study evaluated the performance and efficacy of three biodegradable chelators: L-glutamate-N,N'-diacetic acid (GLDA), methylglycine-diacetic acid (MGDA), and 3-hydroxy-2,2'-iminodisuccinic acid (HIDS) in comparison to EDTA for remediating a real Cd-contaminated agricultural soil. The influence of treatment parameters, including chelator variants, washing time, chelator concentration, solution pH, and liquid-to-soil ratio (L/S) on Cd extraction was studied and optimized to attain the maximum removal rate. Following chelator-assisted washing, the efficacy of a stabilization preference combining FeCl3 and CaO in reducing the leaching potential of residual Cd in chelator-washed soil residues was also investigated. GLDA demonstrated comparable Cd extraction efficiency to EDTA, and the Cd extraction efficiency was found to be positively correlated with the soil washing parameters. However, under the optimized conditions (chelator concentration: 10 mmol L-1; washing time: 3 h; solution pH: 3; L/S ratio: 10:1), GLDA exhibited a higher Cd extraction rate than EDTA or the other chelators. Furthermore, a post-treatment process incorporating FeCl3 and CaO substantially diminished the water-leachable Cd content in the resultant soil residues. The proposed remediation strategy, which combines chemically assisted washing and stabilization, could be a practical option for extracting bulk Cd from soil and reducing the leaching potential of residual Cd.

Current technologies for heavy metal removal from food and environmental resources

Exposure to heavy metals in water and food poses a significant threat to human well-being, necessitating the efficient removal of these contaminants. The process of urban development exacerbates heavy metal pollution, thereby increasing risks to both human health and ecosystems. Heavy metals have the capacity to enter the food chain, undergo bioaccumulation and magnify, ultimately resulting in adverse effects on human health. Therefore, implementing effective pollution control measures and adopting sustainable practices are crucial for mitigating exposure and associated health risks. Various innovative approaches, including adsorption, ion exchange, and electrochemical technology, are currently being actively investigated to cope with the issue of heavy metal contamination. These innovative methods offer benefits such as efficient recycling, cost-effectiveness and environmental friendliness. In this review, we summarize recent advances for removing heavy metals from water, soil and food, providing valuable guidance for environmental engineers and researchers seeking to address contamination challenges.

Vermiremediation of heavy metals (HMs)-contaminated agricultural land: synergistic changes in soil enzyme activities and earthworm's growth parameters

In this investigation the heavy metals (Cu, Zn, Mn, Cr and Ni) remediation potential of Eisenia fetida was studied in the crude oil polluted soil. The potential of E. fetida was evaluated based on the decrease in concentrations of Cu, Zn, Mn, Cr and Ni, and improvement in the soil enzyme activities at the end of 90 days of experimental trials. Moreover, soil health quality, inter-relationship between the enzyme activities and the growth parameters of E. fetida and synergistic relation among the enzyme activities were also evaluated through G-Mean and T-QSI indices, chord plot analysis and principal component analysis (PCA) to confirm the performance of E. fetida during vermiremediation. The results revealed that the soil treated with E. fetida showed a reduction in the concentration of Cu, Zn, Mn, Cr and Ni by 17.4% 19.45%, 9.44%, 23.8% and 9.6% respectively by end of the experimental trials. The cellulase, amylase, polyphenol oxidase, peroxidase, urease, dehydrogenase and catalase activities in the E. fetida-treated soil were enhanced by 89.83%, 99.17%, 142%, 109.9%, 92.9%, 694.3% and 274.5% respectively. The results of SEM-EDS revealed enhancement in the O, K, Na, Mg and P content by 62.36%, 96.2%, 97.9%, 93.7% and 98.2% respectively by the end of the experimental trial. The G-Mean and T-QSI indices also confirmed the improvement in soil enzyme activities thereby indicating the positive influence of E. fetida on soil decontamination process. The chord plot indicated the interrelationship between the earthworm's growth parameters and enzyme activities of the soil as indicated by the high linkage between the nodes. Finally, the PCA confirmed the negative effect of the heavy metals on the soil enzyme activities and synergistic interrelationship between the enzyme activities during the vermiremediation process. Thus, this study demonstrated the changes in the soil enzyme activities and their interconnected influences during vermiremediation of crude oil sourced heavy metals from polluted soil.

Investigating the use of Aspergillus niger fermentation broth as a washing treatment for arsenic and antimony co-contaminated soil

High concentrations of arsenic and antimony contamination in soil are a potential risk to the ecological environment and human health. Soil washing can effectively and permanently reduce the soil contamination. This study used Aspergillus niger fermentation broth as a washing agent to remove As and Sb from contaminated soil. Characterization of organic acids in the fermentation broth by high-performance liquid chromatographic (HPLC) and chemically simulated leaching experiments revealed that oxalic acid played a significant role in removing As and Sb from the soil. The effect of washing conditions on the metal removal rate of Aspergillus niger fermentation broth was investigated by batch experiments, and the optimal conditions were determined: no dilution, pH 1, L/S ratio 15:1, and leaching at 25 °C for 3 h. The soils were washed three times under optimal conditions, with 73.78%, 80.84%, and 85.83% removal of arsenic and 65.11%, 76.39%, and 82.06% removal of antimony, respectively. The results of metal speciation distribution in the soil showed that the fermentation broth could effectively remove As and Sb on amorphous Fe/Al hydrous oxides in soil. The analysis of X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) of soils before and after washing showed that the washing of Aspergillus niger fermentation broth had a minor effect on the structural changes of soils. After washing, soil organic matter and soil enzyme activity were increased. Thus, Aspergillus niger fermentation broth shows excellent potential as a washing agent for removing As and Sb from soils.

A review on the clean-up technologies for heavy metal ions contaminated soil samples

The soil contamination with heavy metal ions is one of the grave intricacies faced worldwide over the last few decades by the virtue of rapid industrialization, human negligence and greed. Heavy metal ions are quite toxic even at low concentration a swell as non-biodegradable in nature. Their bioaccumulation in the human body leads to several chronic and persistent diseases such as lung cancer, nervous system break down, respiratory problems and renal damage etc. In addition to this, the increased concentration of these metal ions in soil, beyond the permissible limits, makes the soil unfit for further agricultural use. Hence it is our necessity, to monitor the concentration of these metal ions in the soil and water bodies and adopt some better technologies to eradicate them fully. From the literature survey, it was observed that three main types of techniques viz. physical, chemical, and biological were employed to harness the heavy metal ions from metal-polluted soil samples. The main goal of these techniques was the complete removal of the metal ions or the transformation of them into less hazardous and toxic forms. Further the selection of the remediation technology depends upon different factors such as process feasibility/mechanism of the process applied, nature and type of contaminants, type and content of the soil, etc. In this review article, we have studied in detail all the three technologies viz. physical, chemical and biological with their sub-parts, mechanism, pictures, advantages and disadvantages.

Characterization of ionic liquids removing heavy metals from electroplating sludge: Influencing factors, optimisation strategies and reaction mechanisms

The disposal of electroplating sludge (ES) is a common concern of researchers. Currently, it is difficult to achieve effective fixation of heavy metals (HMs) using traditional ES treatment. As green and effective HMs removal agents, ionic liquids can be used for the disposal of ES. In this study, 1-butyl-3-methyl-imidazole hydrogen sulphate ([Bmim]HSO₄) and 1-propyl sulphonic acid-3-methyl imidazole hydrogen sulphate ([PrSO₃Hmim]HSO₄) were used as washing solvents for the removal of Cr, Ni, and Cu from ES. In reaction with increased agent concentration, solid-liquid ratio, and duration, the amount of HMs eliminated from ES rises, whereas opposite patterns were shown in response to rising pH. The quadratic orthogonal regression optimisation analysis also revealed that the ideal washing specifications for [Bmim]HSO₄ were 60 g L^-1, 1:40, and 60 min, respectively, for agent concentration, solid-liquid ratio, and washing time, while those for [PrSO₃Hmim]HSO₄ were 60 g L^-1, 1:35, and 60 min, respectively. Under the optimal experimental conditions, the Cr, Ni, and Cu removal efficiencies for [Bmim]HSO₄ were 84.3, 78.6, and 89.7%, respectively, and those values for [PrSO₃Hmim]HSO₄ were 99.8, 90.1, and 91.3%, respectively. This was mainly attributed to that ionic liquids enhance metal desorption through acid solubilisation, chelation, and electrostatic attraction. Overall, ionic liquids are reliable washing reagents for ES contaminated by HMs.

Effect of Soil Washing with an Amino-Acid-Derived Ionic Liquid on the Properties of Cd-Contaminated Paddy Soil

To reduce contamination levels in Cd-contaminated paddy soil while retaining soil characteristics, we have studied the Cd-removing ability of 15 different amino acid-based ionic liquids, which are considered to be green solvents, as soil washing agents and their impact on soil. The results indicated that the glycine hydrochloride ([Gly][Cl]) removed the most Cd, and under optimized conditions could remove 82.2% of the total Cd. Encouragingly, the morphology of the soil had not been significantly changed by the washing process. After the soil was rinsed twice with water and the pH was adjusted to 6.2 by adding Ca(OH)₂, the germination index of the rice increased by 7.5%. The growth of the rice was also stimulated, with lengths and weights of the rice plants increasing by 56% and 32%, respectively, after two weeks. These experiments demonstrate that amino-acid-derived ionic liquids can be promising soil-washing agents of Cd-contaminated paddy soil.

Enhanced removal of arsenic and cadmium from contaminated soils using a soluble humic substance coupled with chemical reductant

Soil washing is an efficient, economical, and green remediation technology for removing several heavy metal (loid)s from contaminated industrial sites. The extraction of green and efficient washing agents from low-cost feedback is crucially important. In this study, a soluble humic substance (HS) extracted from leonardite was first tested to wash soils (red soil, fluvo-aquic soil, and black soil) heavily contaminated with arsenic (As) and cadmium (Cd). A D-optimal mixture design was investigated to optimize the washing parameters. The optimum removal efficiencies of As and Cd by single HS washing were found to be 52.58%-60.20% and 58.52%-86.69%, respectively. Furthermore, a two-step sequential washing with chemical reductant NH₂OH•HCl coupled with HS (NH₂OH•HCl + HS) was performed to improve the removal efficiency of As and Cd. The two-step sequential washing significantly enhanced the removal of As and Cd to 75.25%-81.53% and 64.53%-97.64%, which makes the residual As and Cd in soil below the risk control standards for construction land. The two-step sequential washing also effectively controlled the mobility and bioavailability of residual As and Cd. However, the activities of soil catalase and urease significantly decreased after the NH₂OH•HCl + HS washing. Follow-up measures such as soil neutralization could be applied to relieve and restore the soil enzyme activity. In general, the two-step sequential soil washing with NH₂OH•HCl + HS is a fast and efficient method for simultaneously removing high content of As and Cd from contaminated soils.

Polyaspartic acid assisted-phytoremediation of cadmium-contaminated farmland: Phytoextraction efficiency, soil quality, and rhizosphere microbial community

Cadmium is highly toxic and one of the most dangerous metal pollutants in soil, and poses a serious threat to human health through soil-crop-food chain transmission. Polyaspartic acid (PASP) is a biodegradable additive that is environment-friendly compared to traditional chelating agents. Current studies have explored its effect on auxiliary phytoextraction at a laboratory scale; however, the method is still rarely reported at the field scale. Therefore, this study used two ecotypes of Pennisetum sinese in a field experiment for 3 years in Jiaoxi Township, Liuyang City, Hunan Province, China, to understand the effect of PASP on the phytoremediation of Cd-contaminated soil and soil quality through long-term field studies. Moreover, because the soil microbial community responds well to the phytoremediation effect of heavy metal (including Cd)-contaminated soil, the changes in rhizosphere soil microbial community diversity and composition were analyzed. After 2 years of PASP-enhanced phytoremediation, the PASP application increased the total Cd reduction in soil by 237 % and 255 %, and the soil DTPA-extractable Cd content decreased to 0.092 and 0.087 mg kg^-1. When the application of PASP ceased in the third year, the two ecotypes of P. sinese obtained after harvest could achieve feed safety. Our study showed that the application of PASP could significantly increase the Cd extraction capacity and shoot biomass of P. sinese, and maintain soil health by optimizing the composition and structure of rhizosphere bacterial communities. The rhizosphere bacterial community structure was improved and dominated by Acidobacteriota, Proteobacteria, and Chloroflexi at the phylum level, and the increased abundance of Acetobacter, Enterobacter, Pseudomonas, and Stenotrophomonas at the genus level may promote heavy metal detoxification in soil, plant growth, and phytoremediation. Long-term field monitoring demonstrated that the low-cost and eco-friendly features of PASP made it a good candidate for enhancing phytoextraction efficiency and regulating soil microbial communities for remediation.

Green remediation of cadmium-contaminated soil by cellulose nanocrystals

Cellulose nanocrystals (CNC) were used as a novel, green eluent to remediate Cd-contaminated soil in this study. The influence of washing conditions on the removal of Cd, including CNC concentration, pH value, liquid/solid (L/S) ratio, contact time and temperature were investigated. The effect of CNC remediation of Cd-contaminated soil on soil health and the possible remediation mechanism were also explored. The results showed that CNC concentration, pH value and contact time had a significant effect on the removal efficiency of Cd. CNC rapidly removed heavy metals in soil within 30 min. When the pH value of the eluent was 9.0, the removal efficiency of Cd could reach 86.3 %. The eluent mainly removed exchangeable and reducible fractions of Cd, which could effectively reduce the bioavailability of heavy metals. CNC washing had no negative effects on seed growth, species abundance and Shannon index. C-O, -COO^- groups on CNC played an important role in the reaction between CNC and soil Cd, and other oxygen-containing functional groups on CNC could also assist in adsorption, ion exchange and chemical complexation processes. Therefore, cellulose nanocrystals had the potential to remediate heavy metal-contaminated soils in a green and efficient manner.

Effects of microwave and plastic content on the sulfur migration during co-pyrolysis of biomass and plastic

In order to reduce the risks of sulfur-containing contaminants present in biofuels, the effects of microwave and content of hydrogen donor on the cracking of C-S bonds and the migration of sulfur were studied by co-pyrolysis of biomass and plastic. The synergistic mechanism of microwave and hydrogen donor was explored from the perspective of deducing the evolution of sulfur-containing compounds based on microwave thermogravimetric analysis. By combining temperature-weight curves, it was found that microwaves and hydrogen radicals promoted the cracking of sulfur-containing compounds and increased the mass loss of biomass during pyrolysis. The mixing ratio of hydrogen donor (plastic) was the key parameter resulting in the removal of sulfur from oil. By adjusting the mixing ratio, the yield of co-pyrolyzed oil was three times higher than that of cow dung pyrolysis alone and the relative removal rate of sulfur reached 73.67%. The relative content of sulfur in the oil was reduced by 73.77% due to the escape of sulfur-containing gases (H₂S, COS and C₂H₅SH) and the formation of sulfate crystals in the char. Microwave selectively heated sulfur-containing organics and hydrogen radicals stimulated the breaking of C-S bonds, which improved the cracking efficiency of the oil. This breaking will provide a theoretical and technological reference for the environmentally friendly treatment of biomass and biofuels.

A novel bio-washing eluent obtained from fermentation of fruit wastes for removal of soil Pb: efficiency, mechanism, and risk assessment

Agricultural wastes are inexpensive materials for soil remediation. However, the direct water extracts from these wastes showed low efficiency for Pb removal, thus limiting their application. In this study, citrus pericarp (CP) and pineapple peel (PP), as the common agricultural wastes, were inoculated with lactic acid bacteria to produce fermentation liquors (FCP and FPP) for improving Pb removal efficiency. Results showed that the Pb removal rates by FCP and FPP reached 37.3 and 43.6%, and increased by almost 50.0% than those by CP and PP. The ecological risk of Pb reduced by 83.0-88.2% after five times continuous washing with FCP and FPP, and the Pb concentrations conformed to soil remediation standard of China. Moreover, soil organic carbon 1.5 times increased in the washed soils, while total potassium improved by 40.7-68.0%. The mechanisms of Pb removal by these wastes involved in adsorption-desorption of Pb²⁺, complexation with organic ligands, and co-precipitation of Pb complexes. The increase of low molecular organic acids during the fermentation promoted dissolution of Pb and provided more hydroxyl, carboxyl, and amine groups to interact with Pb²⁺, thus improving its removal rate. Therefore, fermentation liquid from fruit wastes is a novel, effective, and ecofriendly bio-washing eluent for Pb removal from contaminated soils.

Leaching and characterization studies of heavy metals in contaminated soil using sequenced reagents of oxalic acid, citric acid, and a copolymer of maleic and acrylic acid instead of ethylenediaminetetraacetic acid

In this work, the removal performance of three environmentally friendly reagents, oxalic acid (OA), citric acid (CA), and a copolymer of maleic and acrylic acid (PMAA), on heavy metals in polluted soil was studied at the optimum conditions and compared their sequenced performance. The results showed that the consecutive washing with the individual acids significantly improved the removal percentage of heavy metals in the soil compared to that of EDTA (10.2%, 71.3%, 29.8%, 61.6%, and 52.4% removal for As, Cd, Cu, Pb, and Zn, respectively). The removal of As, Cd, Cu, Pb, and Zn in the sequence of CA-OA was 65.6%, 79%, 59.1%, 64.6%, and 63.5%, respectively. In addition, the organic acids had little influence on the soil physicochemical properties after washing with slight reductions of acidity (pH) and soil organic matter (SOM), which are the major determinants of the usability of washed soils for plant growth. The germination rate of Sorghum bicolor in CA-OA-washed soils reached over 70% on the 7th day. CA-OA-washed soils collectively stand out in using washed soils for plant growth with the following advantages: simultaneous removal of cationic and anionic metals, less harmful impact on soil properties, and successful support for the germination of crops. Based on the findings, we recommend the CA-OA sequence as the best alternative to EDTA with higher metal removal efficiency and germination success.

Citric acid-based deep eutectic solvent (CA-DES) as a new soil detergent for the removal of cadmium from coking sites

In order to solve the problem of soil pollution caused by excess heavy metals, cadmium (Cd), a novel soil-washing agent organic chelating acid-based deep eutectic solvent (OCA-DES), was investigated for the removal of Cd from the contaminated soil of coking plant. Four kinds of OCA-DES were prepared by mixing choline chloride (Ch-Cl) with four organic chelating acids (citric acid, oxalic acid, tartaric acid, and malic acid), respectively, to compare their washing efficiency of Cd from soil. The effects of washing operation conditions on the Cd removal efficiency were investigated. Side effects of citric acid-based deep eutectic solvent (CA-DES) on soil were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR). The results showed that CA-DES had the best Cd removal efficiency and could reach as high as 93.75%, under ideal conditions. CA-DES mainly washed extractable and reducible Cd. The CA-DES washing process has less side effects on soil and hardly eroded the soil or changed the mineral structure of the soil. The main roles of CA-DES washing Cd include (1) hydrogen bonds capturing Cd; (2) the carboxyl group(-COOH) forming soluble chelate with Cd; and (3) releasing H⁺ ions in exchange for Cd. This study demonstrates that CA-DES, a novel soil-washing agent, has excellent removal of cadmium from soil and is environment-friendly.

Effect of multiple washing operations on the removal of potentially toxic metals from an alkaline farmland soil and the strategy for agricultural reuse

Few studies have carried out soil washing experiments using pot experiments to simulate in situ soil washing operations, particularly for alkaline soils. This study explored the effects of multiple washing operations using pot experiments on the removal efficiencies of potentially toxic metals (PTM) from alkaline farmland soil and the reuse strategy of washed soil for safe agricultural production. The results showed that the removal efficiencies of Cd, Pb, Cu, and Zn after seven washings with a mixed chelator (EDTA, GLDA, and citric acid) were 41.1%, 47.1%, 14.7%, and 26.5%, respectively, which was close to the results of the EDTA treatment. For the alkaline soil studied, the second washing with the mixed chelators most effectively removed PTM owing to the activation of them after the first washing operation. The mixed chelator more effectively increased the proportion of stable fraction of PTM and maintained soil nutrients (e.g., nitrogen content) than EDTA, indicating little disturbance of alkaline soil quality after washing with the mixed chelator. After the amendment of the washed soil, there was no visible difference in the biomass weight of crops from the soils washed with different agents, indicating that the inhibitory effect of both washing agents on plant growth was effectively alleviated. The Cd and Pb contents in Z. mays were below the threshold of Hygienical Standard for Feeds of China (GB 13078-2017) (1 and 30 mg·kg^-1). Moreover, after three cropping operations, the available concentrations of PTM in the soil washed with the mixed chelator were lower than those in the soil washed with EDTA, indicating the value and potential of agricultural reuse of alkaline farmland soil washed with the mixed chelator.

Polyaspartic acid enhances the Cd phytoextraction efficiency of Bidens pilosa by remolding the rhizospheric environment and reprogramming plant metabolism

The green soil chelator polyaspartic acid (PASP) can enhance heavy metal phytoextraction efficiency, but the potential mechanisms are not clearly understood from the whole soil-plant system. In this study, we explored the effects and potential mechanisms of PASP addition in soils on plant growth and cadmium (Cd) uptake in the Cd hyperaccumulator Bidens pilosa by analysing variations in chemical elements, rhizospheric microbial community, and plant metabolomics. The results showed that PASP significantly promoted the biomass yield and Cd concentration in B. pilosa, leading to an increase in the total accumulated Cd by 46.4% and 76.4% in shoots and 124.7% and 197.3% in roots under 3 and 6 mg kg^-1 PASP addition, respectively. The improved soil-available nutrients and enriched plant growth-promoting rhizobacteria (e.g., Sphingopyxis, Sphingomonas, Cupriavidus, Achromobacter, Nocardioides, and Rhizobium) were probably responsible for the enhanced plant growth after PASP addition. The increase in Cd uptake by plants could be due to the improved rhizosphere-available Cd, which was directly activated by PASP and affected by the induced rhizobacteria involved in immobilizing/mobilizing Cd (e.g., Sphingomonas, Cupriavidus, Achromobacter, and Rhizobium). Notably, PASP and/or these potassium (K)-solubilizing rhizobacteria (i.e., Sphingomonas, Cupriavidus, and Rhizobium) highly activated rhizosphere-available K to enhance plant growth and Cd uptake in B. pilosa. Plant physiological and metabolomic results indicated that multiple processes involving antioxidant enzymes, amino acids, organic acids, and lipids contributed to Cd detoxification in B. pilosa. This study provides novel insights into understanding how soil chelators drive heavy metal transfer in soil-plant systems.

Adsorption of Cd on Soils with Various Particle Sizes from an Abandoned Non-ferrous Smelting Site: Characteristics and Mechanism

Soil particle size could intensively impact the Cd adsorption in soils. The adsorption characteristics of Cd on miscellaneous fill (MF) and weathered slate (WS), collected from a zinc smelting site, were studied by batch experiments under conditions of different initial Cd concentrations and soil particle sizes. The results showed that the adsorption kinetics of Cd for soil particles from MF and WS were well fitted with the pseudo-first-order model, and the Cd adsorption isotherms well conformed to the Freundlich model. Soil particle size had an inconspicuous influence on adsorption rate, while the adsorption capacity decreased with particle size increase. The Cd adsorption on soil particles could be due to the exchange with Fe/Al, and -OH/C=O sites were the predominant adsorption sites. The MF may cause secondary pollution risk due to its low adsorption ability for Cd in smelting sites.

A review for recent advances on soil washing remediation technologies

Contaminated soils have caused serious harm to human health and the ecological environment due to the high toxicity of organic and inorganic pollutants, which has attracted extensive attention in recent years. Because of its low cost, simple operation and high efficiency, soil washing technology is widely used to permanently remove various pollutants in contaminated soils and is considered to be the most promising remediation technology. This review summarized the recent developments in the field of soil washing technology and discusses the application of conventional washing agents, advanced emerging washing agents, the recycling of washing effluents and the combination of soil washing and other remediation technologies. Overall, the findings provide a comprehensive understanding of soil washing technology and suggest some potential improvements from a scientific and practical point of view.

Removal of heavy metals from sewage sludge by chemical leaching with biodegradable chelator methyl glycine diacetic acid

The heavy metals (HMs) contained in sewage sludge are some of the largest obstacles that hamper the usage of sewage sludge in land application (e.g. fertilizer, soil improver). The conventional chelators, e.g., ethylenediaminetetraacetic acid (EDTA), were effective in the remediation of HMs polluted sewage sludge, but suffered from an evident drawback of low biodegradability. Therefore, the applicability of a new biodegradable chelator, methyl glycine diacetic acid (MGDA), to extract HMs from sewage sludge was carried out and compared with EDTA. The experimental parameters affecting the performance of MGDA were optimized. Leaching results showed that in general, MGDA exhibited higher Zn leaching efficiency and similar Cu, Ni and Cr leaching efficiencies with EDTA at same pH and dosage conditions. The maximum Zn, Cu, Ni and Cr leaching efficiencies of MGDA were 94.1% ± 4.5%, 58.2% ± 3.1%, 78.2% ± 2.3% and 54.6% ± 2.5%, respectively. The leaching efficiency plateaued within a reaction time of 4 h, but that of Cu and Ni showed a slightly decreasing trend during hours 4 to 10. In raw sewage sludge, the Zn and Cu were mainly presented in the organically bound fraction, i.e., 45.3 ± 3.2% of total Zn and 48.3 ± 1.4% of total Cu. The addition of MGDA and EDTA caused obvious distribution transformations in Zn and Cu from the organically bound fraction to soluble fraction. According to the reduced partition index calculation, the mobility of Zn, Cu, Ni, and Cr was not significantly lowered after the MGDA treatment. However, the HMs secondary pollution risk of the sludge was reduced due to the drop of the total HMs content after chelator leaching. Findings from this study suggest that MGDA could be a potential environment-friendly alternative for refractory chelators (e.g. EDTA) in the decontamination of HMs from sludge.

Co-high-efficiency washing agents for simultaneous removal of Cd, Pb and As from smelting soil with risk assessment

Soil washing is considered a highly efficient technology due to its higher removal rate of multiple heavy metals from contaminated soil. However, previous studies on Cd, Pb and As washing agents for soils with complex contaminations did not consider the differences in As and Cd/Pb properties, resulting in the lack of effective washing compounds and washing conditions for soils with complex contaminations. Moreover, most traditional washing agents can cause secondary pollution. In this study, HEDTA and lactic acid (LA) treatments resulted in a higher Cd and Pb removal, while 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) was more effective in As removal. Most importantly, a new washing strategy was proposed with a new combined high-efficiency washing agents consisting of HEDP + LA + FeCl₃ with a ratio of 6:3:1. Considering washing efficiency and consumption under optimal washing conditions, i.e. the soil/liquid (S/L) ratio of 1:20 and washing time of 48 h, the rates of Cd, Pb and As removal were 79.93%, 69.84% and 61.55%, respectively. In addition, washing process could influence the speciation of heavy metals, especially oxidizable and residual Cd and Pb fractions, as well as reducible As fraction. The washing process using the new washing agent can significantly reduce the pollution level and health risk of Cd, Pb and As contamination. The results of this study can provide an efficient washing agent for the remediation of heavy metal-contaminated soils at smelting sites, which will help protect human health.

Heavy metal removal using an advanced removal method to obtain recyclable paper incineration ash

Various agents, including ethylenediaminetetraacetic acid, oxalic acid, citric acid, and HCl, were applied to remove heavy metals from raw paper incineration ash and render the ash recyclable. Among these prepared agent solutions, ethylenediaminetetraacetic acid showed the highest efficiency for Pb removal, while oxalic acid showed the highest efficiencies for Cu, Cd, and As removal. Additionally, three modes of an advanced removal method, which involved the use of both ethylenediaminetetraacetic acid and oxalic acid, were considered for use at the end of the rendering process. Among these three modes of the advanced removal method, that which involved the simultaneous use of ethylenediaminetetraacetic acid and oxalic acid, i.e., a mixture of both solutions, showed the best heavy metal removal efficiencies. In detail, 11.9% of Cd, 10% of Hg, 28.42% of As, 31.29% of Cu, and 49.19% of Pb were removed when this method was used. Furthermore, the application of these three modes of the advanced removal method resulted in a decrease in the amounts of heavy metals eluted and brought about an increase in the CaO content of the treated incineration ash, while decreasing its Cl content. These combined results enhanced the solidification effect of the treated incineration ash. Thus, it was confirmed that the advanced removal method is a promising strategy by which recyclable paper incineration ash can be obtained.

Enhanced remediation of arsenic-contaminated excavated soil using a binary blend of biodegradable surfactant and chelator

The reclamation of geogenic As-contaminated excavated soils as construction additives can reduce the post-disposal impact on the ecosystem and space. Although retaining soil characteristics while reducing contaminant load is a challenging task, washing remediation with biodegradable surfactants or chelators is a promising alternative to non-biodegradable counterparts. In this study, newly synthesized biodegradable surfactants (SDG: sodium N-dodecanoyl-glycinate, SDBA: sodium N-dodecanoyl-β-alaninate, SDGBH: sodium N-dodecanoyl-α,γ-glutamyl-bis-hydroxyprolinate, SDT: sodium N-dodecanoyl-taurinate, and DCPC: N-dodecyl-3-carbamoyl-pyridinium-chloride) and biodegradable chelators (EDDS: ethylenediamine N,N'-disuccinic acid, GLDA: L-glutamate-N, N'-diacetic acid, and HIDS: 3-hydroxy-2,2'-imino disuccinic acid) are evaluated for the remediation of As-contaminated soil. The operating variables, such as washing duration, solution pH, and surfactant or chelator concentration, are optimized for maximum As extraction. SDT shows the highest As-extraction efficiency irrespective of solution pH and surfactant variants, while HIDS is the superior chelator under acidic or alkaline conditions. A binary blend of SDT and HIDS is evaluated for As extraction under varying operating conditions. The SDT-HIDS binary blend demonstrates 6.9 and 1.6-times higher As-extraction rates than the SDT and HIDS-only washing, respectively, under acidic conditions. The proposed approach with a binary blend of a biodegradable surfactant and chelator is a green solution for recycling As-contaminated excavated soils for geotechnical applications.

Enhanced remediation of Cd-contaminated soil using electrokinetic assisted by permeable reactive barrier with lanthanum-based biochar composite filling materials

Electrokinetic remediation (EK) combined with a permeable reactive barrier (PRB) is a relatively new technique for efficiently remediating Cd-contaminated soil in situ. Eupatorium adenophorum, which is a malignant invasive plant, was used to synthesise biochar and a novel lanthanum-based biochar composite (LaC). The biochar and LaC were used as cheap and environmentally benign PRB filling materials to remediate simulated and real Cd-contaminated soils. The pH and residual Cd concentration in the simulated contaminated soil during remediation gradually increased from the anode to the cathode used to apply an electric field to the EK-PRB system. However, the soil conductivity changed in the opposite way, and the current density first increased and then decreased. For simulated contaminated soils with initial Cd concentrations of 34.9 and 100.6 mg kg^-1, the mean Cd removal rates achieved using LaC were 90.6% and 89.3%, respectively, which were significantly higher than those of biochar (P < 0.05). Similar results were achieved using natural soils from mining area and polluted farmland, and the Cd removal rates were 66.9% and 72.0%, respectively. Fourier-transform infrared and X-ray photoelectron spectroscopy indicated that there were many functional groups on the LaC surfaces. The removal mechanism of EK-PRB for Cd in contaminated soil includes electromigration, electroosmotic flow, surface adsorption, and ion exchange. The results indicated that the LaC could be used in the EK-PRB technique as a cheap and 'green' material to efficiently decontaminate soil polluted with heavy metals.

Optimization of Carboniferous Egyptian Kaolin Treatment for Pharmaceutical Applications

This paper quantitatively determines the occurrences of potentially toxic elements in Carboniferous kaolin in southwestern Sinai, Egypt. This research describes, in detail, the experimental treatment optimization to be used in pharmaceutical applications. The concentrations of As, Co, Ni, Pb, and V in these kaolin deposits exceed the Permitted Concentrations of Elemental Impurities for oral use in pharmaceutical applications. Herein, six desorbing agents (acetic acid, citric acid, DTPA, EDDS, EDTA, and NTA) were utilized as extracting solutions in batch-wise extractions to select the proper reagents. Parameters such as the pH, the mixing speed and time, and the solid–solution ratio were varied to optimize the extraction conditions. The findings indicate that citric acid and EDTA were effective in the removal of the aforementioned elements. The results reveal that the optimum removal of potentially toxic elements from kaolin can be achieved using citric acid and EDTA concentrations of 0.2 M and 0.1 M, respectively, for the treatment of 5 g of kaolin, under a pH of 4 for citric acid, and a pH of 10 for EDTA. The ideal mixing speed and time are 500 rpm and 6 h, respectively. Using 1:10 S/L of citric acid and EDTA showed removal rates of 100% for all the investigated PTEs. We recommend this treatment for different kinds of kaolin showing various degrees of contamination.

Performance of biochar-supported nanoscale zero-valent iron for cadmium and arsenic co-contaminated soil remediation: Insights on availability, bioaccumulation and health risk

Simultaneous stabilization of cadmium (Cd) and arsenic (As) in co-contaminated soil is challenging in environmental remediation because of their opposite properties. In this study, biochar-supported nanoscale zero-valent iron (nZVI-BC) was designed for simultaneously decreasing the soil availability of Cd and As and their bioaccumulation in vegetables. It was found that nZVI-BC exhibited remarkable performance for the stabilization of Cd and As in soil, and their availability decreased by 34.93% and 32.64% compared to the control sample, respectively, under 1.00% nZVI-BC treatment. The increase of soil pH and complexation dominated the Cd remediation process, while the formation of precipitation together and surface complexes transformed labile As into stable forms. Pot experiments showed that nZVI-BC application inhibited the bioaccumulation of Cd and As in vegetables by 23.63-36.48% and 43.09-45.10%, respectively, and hence effectively decreased the cancer risks by 38.19-42.93% related with vegetable consumption (P < 0.05). This study revealed that nZVI-BC is a promising amendment for achieving the simultaneous remediation of Cd and As co-contaminated farmland soil.

A review of the new multifunctional nano zero-valent iron composites for wastewater treatment: Emergence, preparation, optimization and mechanism

Nano zero-valent iron (NZVI) with high chemical reactivity and environmental friendliness had recently become one of the most efficient technologies for wastewater restoration. However, the unitary NZVI system had not met practical requirements for wastewater treatments. Expectantly, the development of NZVI would prefer multifunctional NZVI-based composites, which could be prepared and optimized by the combined methods and technologies. Consequently, a systematic and comprehensive summary from the perspective of multifunctional NZVI-composite had been conducted. The results demonstrated that the advantages of various systems were integrated by multifunctional NZVI-composite systems with a more significant performance of pollutant removal than those of the bare NZVI and its composites. Simultaneously, characteristics of the product prepared by the incorporation of numerous methods were superior to those by a simple method, resulting in the increase of the entirety efficiency. By comparison with other preparation methods, the ball milling method with higher production and field application potential was worthy of attention. After combining multiple technologies, the effect of NZVI and its composite systems could be dramatically strengthened. Preparation technology parameters and treatment effect of contaminants could be further optimized using more comprehensive experimental designs and mathematical models. The mechanism of the multifunctional NZVI system for contaminants treatment was primarily focused on adsorption, oxidation, reduction and co-precipitation. Multiple techniques were combined to enhance the dispersion, alleviating passivation, accelerating electron transfer efficiency or mass transfer action for optimizing the effect of NZVI composites.

Thermodynamic Solution Properties of a Biodegradable Chelant (L-glutamic-N,N-diacetic Acid, L-GLDA) and Its Sequestering Ability toward Cd2

The thermodynamics of the interaction of L-glutamic-N,N-diacetic acid (GLDA) with protons was studied potentiometrically at different temperatures, ionic strengths and ionic media. Four protonation constants and corresponding enthalpy changes occurred at infinite dilution together with temperature and ionic strength coefficients. The medium effect was also interpreted in terms of the formation of weak complexes between the ligand and the cations of supporting electrolytes, resulting in a greater tendency of GLDA to chemically interact with Na+ rather than K+ and, in turn, (CH3)4N+. Formation constants of GLDA with Cd2+ were determined in NaCl(aq) at different ionic strength values. Five complex species were found, namely CdL2-, CdHL-, CdH2L0(aq), Cd2L0(aq), and Cd(OH)L3-, whose formation constant values at infinite dilution were log β = 12.68, 17.61, 20.76, 17.52, and 1.77, respectively. All the species results were relevant in the pH range of natural waters, although the Cd2L0(aq) was observed only for CCd ≥ CGLDA and concentrations of >0.1 mmol dm-3. The sequestering ability of GLDA toward Cd2+, evaluated by means of pL0.5, was maximum at pH~10, whereas the presence of a chloride containing a supporting electrolyte exerted a negative effect. Among new generation biodegradable ligands, GLDA was the most efficient in Cd2+ sequestration.

Remediation of zinc-contaminated soils by using the two-step washing with citric acid and water-soluble chitosan

Remediation of heavy metal contaminated soil with appropriate washing agents is crucial to the decline in the harmfulness of contaminated soil by heavy metals to the environment and human health. In this study, citric acid (CA) and water-soluble chitosan (WSCS) as natural and degradable washing agents were used to remove Zn in the soil by two-step washing method. Results indicated that the two-step washing with CA and WSCS were found to be suitable for the removal of Zn from the contaminated soils, which significantly decreased the total concentration of Zn in the soil. After the remediation process with two-step soil washing, the contents of Zn in different chemical species decreased, especially for the carbonate-bound fraction. Therefore, the two-step soil washing with CA and WSCS was advisable for the remediation of Zn-contaminated soils. The washing mechanism could include the acid dissolution, ion exchange and complexation reaction between zinc ions and functional groups such as hydroxyl, carboxyl, amine and amide groups. This study provided the theoretical support for the exploitation and application of suitable washing agents used for the remediation of contaminated soils by heavy metals.

Efficiency and comprehensive risk assessment of soil Pb and Cd by washing technique with three biodegradable eluents

Soil washing with environmentally friendly eluents is a rapid remediation technique for farmland polluted by heavy metals. In this study, polyepoxysuccinic acid (PESA), ethylenediamine tetra (methylene phosphonic acid) sodium (EDTMPS), and phosphonyl carboxylic acid copolymer (POCA) were applied to remedy paddy and arid soils polluted by Pb and Cd. At the same time, ethylenediaminetetraacetic acid (EDTA) was used as a control eluent. PESA showed comparable removal of soil Pb and Cd (over 80.0%) with EDTA, and EDTMPS and POCA removed two heavy metals by 35.2-50.3%. For labile fractions, PESA significantly removed Pb by 93.5-96.7% and Cd by 84.9-90.3% in two soils. EDTMPS and POCA removed Pb by 75.5-85.8% in two soils, while they only removed Cd by 11.7-42.2% in paddy soil, and 76.3-81.7% in arid soil. The risks of total heavy metal concentrations were reduced from the high risk to low risk in paddy soil, and to considerable risk in arid soil, while only dropped to considerable or even had no change by EDTMPS and POCA leaching. The risks of the two soils reduced from high to low or considerable level after PESA washing based on labile fraction change, and to considerable or high level after EDTMPS and POCA leaching, respectively. Therefore, PESA is an ecological benefit eluent for remediating the farmland polluted by heavy metals, and the risk assessment based on labile fraction more easily identifies the dynamic change of heavy metal during the washing process.

Cleanup of arsenic, cadmium, and lead in the soil from a smelting site using N,N-bis(carboxymethyl)-L-glutamic acid combined with ascorbic acid: A lab-scale experiment

Chemical washing has been carried out to remediate soil contaminated with heavy metals. In this study, the appropriate washing conditions for N,N-bis(carboxymethyl)-L-glutamic acid (GLDA) combined with ascorbic acid were determined to remove As, Cd, and Pb in the soil from the smelting site. The mechanism of heavy metal removal by the washing agent was also clarified. The results showed that heavy metals in the soil from the smelting site can be effectively removed. The removal percentages of As, Cd, and Pb in the soil from the smelting site were found to be 34.49%, 63.26%, and 62.93%, respectively, under optimal conditions (GLDA and ascorbic acid concentration ratio of 5:20, pH of 3, washing for 60 min, and the liquid-to-solid ratio of 10). GLDA combined with ascorbic acid efficiently removes As, Cd, and Pb from the soil through synergistic proton obstruction, chelation, and reduction. GLDA can chelate with iron and aluminum oxides while directly chelate with Cd and Pb. Ascorbic acid can reduce both Fe(III) to Fe(II) and As(III) to As⁰. The dissolution of As was promoted by indirectly preempting the binding sites of iron and aluminum in the soil while those of Cd and Pb were improved by directly interrupting the binding sites. This study suggested that GLDA combined with ascorbic acid is an effective cleanup technology to remove As, Cd, and Pb simultaneously from contaminated smelting site soils.

Polyaspartic acid alleviates cadmium toxicity in rapeseed leaves by affecting cadmium translocation and cell wall fixation of cadmium

Polyaspartic acid (PASP) is a macromolecule compound with carboxylic acid side chains which is polymerized by L-aspartic acid, has been used as a biodegradable and environmentally-friendly chelating agent to enhance the phytoremediation of heavy metal-contaminated soils. Cadmium (Cd) is a toxic element for plant growth, productivity, and food security. To reveal the responses of PASP to plant physiology and morphology under Cd stress, we comprehensively analyzed soil characteristics, cell ultrastructure, reactive oxygen species (ROS), antioxidant enzymes, Cd uptake, transport, subcellular distribution, cell wall compositions, and their Cd chelating capacity in rapeseed. The results showed PASP increased the content of total N, total P, and available P in soil by 3.4%, 28.6%, and 39.8%, respectively, but did not change soil pH and available Cd. Meanwhile, PASP promoted dry mass accumulation and increased photosynthetic pigment content in rapeseed leaves by maintaining the chloroplast structure. Lower malondialdehyde (MDA) content and hydrogen peroxide (H2O2) accumulation and activated antioxidant enzymes in leaves indicate that PASP contributed to relieving Cd-induced oxidative damage to cells of rapeseed leaves. The results indicated that PASP application increased the Cd distribution ratio in root cell walls from 47.4% to 62.3% and decreased the Cd content in xylem sap by 37.8%, which ultimately reduced Cd reallocation in leaves. Additionally, higher pectin content and Cd in pectin resulted in higher Cd retention in leaf cell walls while reducing its concentration in the organelle fraction. The results indicated that 0.3% PASP effectively alleviated Cd stress in rapeseed leaves by inhibiting Cd transportation from roots, activating antioxidant enzymes to scavenge ROS, and promoting Cd chelation by cell wall pectin in leaves.

Short-Term Soil Flushing with Tannic Acid and Its Effect on Metal Mobilization and Selected Properties of Calcareous Soil

Cadmium, Cu, Ni, Pb, and Zn removal via soil flushing with tannic acid (TA) as a plant biosurfactant was studied. The soil was treated for 30 h in a column reactor at a constant TA concentration and pH (3%, pH 4) and at variable TA flow rates (0.5 mL/min or 1 mL/min). In the soil leachates, pH, electrical conductivity (EC), total dissolved organic carbon, and metal concentrations were monitored. Before and after flushing, soil pH, EC, organic matter content, and cation exchange capacity (CEC) were determined. To analyze the organic matter composition, pyrolysis as well as thermally assisted hydrolysis and methylation coupled with gas chromatography-mass spectrometry were used. Metal fractionation in unflushed and flushed soil was analyzed using a modified sequential extraction method. The data on cumulative metal removal were analyzed using OriginPro 8.0 software (OriginLab Corporation, Northampton, MA, USA) and were fitted to 4-parameter logistic sigmoidal model. It was found that flushing time had a stronger influence on metal removal than flow rate. The overall efficiency of metal removal (expressed as the ratio between flushed metal concentration and total metal concentration in soil) at the higher flow rate decreased in this order: Cd (86%) > Ni (44%) > Cu (29%) ≈ Zn (26%) > Pb (15%). Metals were removed from the exchangeable fraction and redistributed into the reducible fraction. After flushing, the soil had a lower pH, EC, and CEC; a higher organic matter content; the composition of the organic matter had changed (incorporation of TA structures). Our results prove that soil flushing with TA is a promising approach to decrease metal concentration in soil and to facilitate carbon sequestration in soil.

Efficient simultaneous removal of heavy metals and polychlorobiphenyls from a polluted industrial site by washing the soil with natural humic surfactants

We evaluated the effectiveness of natural organic surfactants such as humic acids (HA) from lignite to simultaneously wash heavy metals (HM) and polychlorobiphenyls (PCB) from a heavily contaminated industrial soil of northern Italy. Supramolecular HA promote in solution a micelle-like structure, where recalcitrant apolar organic xenobiotics are repartitioned from surfaces of soil particles during soil washing process. Concomitantly, the HA acidic functional groups enable a simultaneous complexation of HM. A single soil washing with HA removed 68 and 75% of PCB congeners for 1:1 and 10:1 solution/soil ratios, respectively. The same HA washing simultaneously and efficiently removed a cumulative average of 47% of total HM, with a maximum of 57 and 67% for Hg and Cu, respectively. We showed that washing a highly polluted soil with HA solution not only is an effective and rapid soil remediation technique but also simultaneously removes both HM and persistent organic pollutants (POP). Soil washing by humic biosurfactants is also a sustainable and eco-friendly technology, since, contrary to synthetic surfactants and solvents used in conventional washing techniques, it preserves soil biodiversity, promotes natural attenuation of unextracted POP, and accelerates further soil reclamation techniques such as bio- or phytoremediation.

Remediation of Metal/Metalloid-Polluted Soils: A Short Review

The contamination of soil by heavy metals and metalloids is a worldwide problem due to the accumulation of these compounds in the environment, endangering human health, plants, and animals. Heavy metals and metalloids are normally present in nature, but the rise of industrialization has led to concentrations higher than the admissible ones. They are non-biodegradable and toxic, even at very low concentrations. Residues accumulate in living beings and become dangerous every time they are assimilated and stored faster than they are metabolized. Thus, the potentially harmful effects are due to persistence in the environment, bioaccumulation in the organisms, and toxicity. The severity of the effect depends on the type of heavy metal or metalloid. Indeed, some heavy metals (e.g., Mn, Fe, Co, Ni) at very low concentrations are essential for living organisms, while others (e.g., Cd, Pb, and Hg) are nonessential and are toxic even in trace amounts. It is important to monitor the concentration of heavy metals and metalloids in the environment and adopt methods to remove them. For this purpose, various techniques have been developed over the years: physical remediation (e.g., washing, thermal desorption, solidification), chemical remediation (e.g., adsorption, catalysis, precipitation/solubilization, electrokinetic methods), biological remediation (e.g., biodegradation, phytoremediation, bioventing), and combined remediation (e.g., electrokinetic–microbial remediation; washing–microbial degradation). Some of these are well known and used on a large scale, while others are still at the research level. The main evaluation factors for the choice are contaminated site geology, contamination characteristics, cost, feasibility, and sustainability of the applied process, as well as the technology readiness level. This review aims to give a picture of the main techniques of heavy metal removal, also giving elements to assess their potential hazardousness due to their concentrations.

Process design and validation of a new mixed eluent for leaching Cd, Cr, Pb, Cu, Ni, and Zn from heavy metal-polluted soil

Chemical leaching, an emerging technology for treating heavy metal-polluted soils, requires a design for reasonable and new eluent and an evaluation of its efficiency on the simultaneous removal of different elements. In this study, the leaching effect and biodegradability of chelating agents were compared, and ethylenediamine disuccinic acid (EDDS) was selected to combine with ferric chloride (FeCl₃) for the design of a mixed eluent (EDDS + FeCl₃). Through batch experiments, the influences of the eluent concentration and solution pH on leaching were revealed, and leaching efficiencies of EDDS, FeCl₃, and EDDS + FeCl₃ on six heavy metals Cd, Cr, Pb, Cu, Ni, and Zn in the soil were separately analyzed. Results indicated that EDDS + FeCl₃ showed advantages over both EDDS and FeCl₃ alone, and it presented an excellent effect, especially for simultaneously leaching multiple heavy metals from the soil. The highest leaching efficiencies for Cd, Cr, Pb, Cu, Ni, and Zn reached up to 71.36%, 21.29%, 31.14%, 30.25%, 34.05%, and 4.96%, respectively. According to different soil types and target elements, the concentration, pH condition, and mass ratio of EDDS + FeCl₃ could be adjusted for soil remediation. Fourier transform infrared spectroscopy proved that the better leaching effect of EDDS + FeCl₃ was attributed to changes in the number and strength of functional groups in the solution, which enhanced the chelating ability of the mixed eluent and heavy metal ions. Therefore, chemical leaching by EDDS + FeCl₃ for the remediation of multiple heavy metal-contaminated soil is a potential feasible strategy.

Removal of lead and other toxic metals in heavily contaminated soil using biodegradable chelators: GLDA, citric acid and ascorbic acid

In this study, we investigated the level of contamination of agricultural soil near an old recycling lead smelter in Vietnam and proposed an effective treatment for the remediation of the soil. The analysis of soil samples using an ICP-MS method revealed that the soil in the area was heavily contaminated by heavy metals, especially lead (Pb) with concentrations in surface soil of >3000 μg g^-1. High concentrations of metals, including Pb, copper (Cu) and zinc (Zn), were found in whole soil profile. The FE-EPMA and Laser-Raman spectrometer results suggested that iron minerals and carbon materials in the soil are the important hosts of the toxic metals. Subsequently, a series of washing experiment were performed on the soil using biodegradable chelators, including N, N-dicarboxymethyl glutamic acid tetrasodium salt (GLDA), ascorbic acid and citric acid. The results showed that the mixture of GLDA-ascorbic (100 mM: 100 mM) can be considered as a potential candidate for Pb and Zn removal, which removes approximately 90% of Pb and 70% of Zn. Meanwhile, a mixture of GLDA-citric would be preferred for Cu removal based on its greater extraction efficiency compared to other mixtures.

Pivotal effects of external Fe2+ on remediation of arsenite by zero-valent iron/persulfate: Efficiencies and mechanism

Persulfate could be activated by zero-valent iron (ZVI) leading to the rapid removal of various contaminants. However, quick consumption of Fe²⁺ largely constrained the removal (%) of target pollutants. Here it was reported that Na₂S₂O₈ (SP) combined with ZVI, as an external source of Fe²⁺, was activated by Fe²⁺ to quickly (minutes scale) and efficiently (more than 90%) remove As (III) from aqueous solution at an initial pH value from 1.0 to 9.0. As (III) removal was obviously improved by an increase of Fe²⁺ rather than Na₂S₂O₈ dosage. The removal of As (III) using Fe²⁺-SP-ZVI system followed the pseudo-second-order kinetic and pseudo-first-order kinetic expression. Fe²⁺ from ZVI oxidization could improve the efficient generation of , which obviously boosted ZVI corrosion. The production of could be manipulated by oxalic acid, ethylenediaminetetraacetic acid (EDTA), citric acid and phosphates through controlling the concentration of dissociative Fe²⁺, leading to an obvious repression on As (III) removal. The fitting of X-ray absorption fine structure (XAFS) spectra illustrated that the interatomic distance of As-O shell was located between As(III)-O and As(V)-O shell and external Fe²⁺ could promote the oxidation of As (III) to As (V) from 35.6% in 1.0 min-44.5% in 10.0 min. Goethite as the main component of iron oxyhydroxides might play a significant role of As (III) adsorption in Fe²⁺-SP-ZVI system. These findings are crucial for knowing the fate and transport of arsenic under permeable reactive barriers.