Chemical speciation and distribution of potentially toxic elements in soilless cultivation of cucumber with sewage sludge biochar addition

Paper-based sap enrichment device combined with laser-induced breakdown spectroscopy for the minimally invasive detection of Cd(Ⅱ) and Pb(Ⅱ) in plants

Detecting heavy metals in plants is highly important for diagnosing plant health and understanding the stress mechanisms induced by heavy metals. However, the minimally invasive detection of heavy metals in plants remains a challenge. A novel paper-based sap enrichment device (PBSED), combined with laser-induced breakdown spectroscopy (LIBS) was proposed for the minimally invasive detection of Cd(Ⅱ) and Pb(Ⅱ) in plants. The PBSED included a stainless-steel capillary and heavy metal ion enrichment filter paper (HMIE-FP). The stainless-steel capillary was inserted into the plant stem, where plant sap was transported onto the paper substrate through capillary action. The heavy metal ions (HMIs) in the plants were enriched on the HMIE-FP, and LIBS was used to detect Cd(Ⅱ) and Pb(Ⅱ) on the HMIE-FP to determine the Cd(Ⅱ) and Pb(Ⅱ) concentration within the plant. COMSOL simulations were employed to analyse the flow dynamics of plant sap within the PBSED. To increase the heavy metal enrichment amount, the HMIE-FP was modified with AuAg bimetallic nanoparticles (AuAgBNPs). The PBSED-LIBS method was applied to detect Cd(Ⅱ) and Pb(Ⅱ) in cucumber plants, and the results were strongly correlated with the inductively coupled plasma mass spectrometry (ICP-MS) results (R² = 0.99 for Cd(Ⅱ) and 0.96 for Pb(Ⅱ)). The proposed PBSED-LIBS method demonstrated high sensitivity and minimal invasiveness; thus, it is suitable for rapid, in vivo detection of HMIs in plants. These findings provide valuable insights for the development of efficient, nondestructive tools for environmental applications.

Magnetic biochar enhanced copper immobilization in agricultural lands: Insights from adsorption precipitation and redox

Biochar has exceeded expectations for heavy metal immobilization and has been prepared from widely available sources and inexpensive materials. In this research, coconut shell biochar (CSB), bamboo biochar (BC), magnetic coconut shell charcoal (MCSB), and magnetic bamboo biochar (MBC) were manufactured via co-pyrolysis, and their adsorption properties were tested. The pseudo-secondary (R2 = 0.980-0.985) adsorption kinetic fittings for the four biochas were superior to the pseudo-primary kinetics (R2 = 0.969-0.982). Unmodified biochar adsorption isotherms were more consistent with the Freundlich model, while magnetic biochar fitted Langmuir models better. The maximum adsorption capacity of MCSB for Cu(Ⅱ) reached 371.50 mg g-1. The adsorption mechanisms quantitatively analysis of the biochar indicated that chemical precipitation and ion exchange contributed to the adsorption, in which the magnetic biochar metal-π complexation also enhanced the adsorption. The pot experiment revealed that MCSB (2.0 %DW) significantly enhanced the biomass of lettuce, and facilitated the immobilization of DTPA-Cu (p < 0.05). SEM-EDS, XPS, and FTIR were utilized for morphological characterization and functional group identification, and the increased active adsorption sites (-OH, -COOH, CO, and Fe-O) of MCSB enhanced chemisorption and π-π EDA complexation with Cu(Ⅱ). EEM-PARAFAC and RDA analysis further elucidated that magnetic biochar immobilized copper and reduced biotoxicity (efficiency: 76.12%) by adjusting soil pH, phosphate, and SOM release (negative correlation). The presence of iron oxides (FeOx) promoted in situ adsorption of metallic copper and offered new insights into soil remediation.

Cultivating Food Safety Together: Insights About the Future of Produce Safety in the U.S. Controlled Environment Agriculture Sector

Controlled environment agriculture (CEA) is a rapidly growing sector that presents unique challenges and opportunities in ensuring food safety. This manuscript highlights critical gaps and needs to promote food safety in CEA systems as identified by stakeholders (n=47) at the Strategizing to Advance Future Extension andResearch (S.A.F.E.R.) CEA conference held in April 2023 at The Ohio State University's Ohio CEA Research Center. Feedback collected at the conference was analyzed using an emergent thematic analysis approach to determine key areas of focus. Research-based guidance is specific to the type of commodity, production system type, and size. Themes include the need for improved supply chain control, cleaning, and sanitization practices, pathogen preventive controls and mitigation methods and training and education. Discussions surrounding supply chain control underscored the significance of the need for approaches to mitigate foodborne pathogen contamination. Effective cleaning and sanitization practices are vital to maintaining a safe production environment, with considerations such as establishing standard operating procedures, accounting for hygienic equipment design, and managing the microbial communities within the system. Data analysis further highlights the need for risk assessments, validated pathogen detection methods, and evidence-based guidance in microbial reduction. In addition, training and education were identified as crucial in promoting a culture of food safety within CEA. The development of partnerships between industry, regulatory, and research institutions are needed to advance data-driven guidance and practices across the diverse range of CEA operations and deemed essential for addressing challenges and advancing food safety practices in CEA. Considering these factors, the CEA industry can enhance food safety practices, foster consumer trust, and support its long-term sustainability.

Effect of biochar derived from co-pyrolysis of sewage sludge and rice straw on cadmium immobilization in paddy soil

The remediation of cadmium (Cd) contaminated cropland has been related to food safety and public health. While biochar derived from sewage sludge (SS) has been widely used for soil remediation due to its high efficiency of Cd immobilization, it has a low specific surface area and the ecological risk of heavy metals. Co-pyrolysis of straws and SS could resolve these issues. To date, little is known about the effect of biochar from SS/rice straw (RS) on Cd immobilization in soils. Here, we explored the soil remediation efficiency and mechanism of biochar derived from different mixing ratios (1:0, 3:1, 2:1, 1:1, 1:2, 1:3 and 0:1) of RS and SS named as RBC, R3S1, R2S1, R1S1, R1S2, R1S3 and SBC. It was shown that R1S2 amendment had the most efficiency of Cd immobilization among all amendments, which decreased the bioavailable Cd by 85.61% and 66.89% compared with RBC and SBC amendments. Results of biochar after soil remediation revealed that cation-π interaction, complexation, ion exchange and precipitation were the key mechanisms of Cd immobilization by biochar. All biochar amendments indirectly promoted Cd immobilization through increasing soil pH values, cation exchange capacity (CEC), soil organic carbon (SOC) and available phosphorous (AP). Compared with RBC, R1S2 reduced bioavailable Cd mainly through the increased soil pH, CEC and AP. However, the enhanced efficiency of Cd immobilization in R1S2 amendment than that in SBC amendment because of the more developed pore structure, functional groups and larger specific surface area of R1S2. Overall, our study showed a new type of biochar for the effective remediation of Cd-contaminated soil.

Impact of physiochemical properties, microbes and biochar on bioavailability of toxic elements in the soil: a review

The pollution of toxic elements (TEs) in the ecosystem exhibits detrimental effects on the human health. In this paper, we debated remediation approaches for TEs polluted soils via immobilization methods employing numerous amendments with reverence to type of soil and metals, and amendment, immobilization competence, fundamental processes and field applicability. We argued the influence of pH, soil organic matter, textural properties, microbes, speciation and biochar on the bioavailability of TEs. All these properties of soil, microbes and biochar are imperative for effective and safe application of these methods in remediation of TEs contamination in the ecosystem. Further, the application of physiochemical properties, microbes and biochar as amendments has significant synergistic impacts not only on absorption of elements but also on diminution of toxic elements.

PPCPs and heavy metals from hydrothermal sewage sludge-derived biochar: migration in wheat and physiological response

Once the sludge was directly used in the farmland, it will have a negative impact on human health through the food chain because sludge contains pollutants. Sewage sludge pyrolysis into biochar is an effective way to realize sludge harmless and resourceful utilization. This research used hydrothermal carbonization method to convert sludge into sludge biochar (SLBC) to reduce the types and contents of pharmaceuticals and personal care products (PPCPs) and available heavy metals. Furthermore, migration of the residual caffeine (Caf), acetaminophen (Ace), and heavy metals (Cr, Pb, Cu, Zn) released from the SLBC in the wheat was assessed. The results showed that the levels of Caf, Ace, Pb, Cu, and Zn accumulated in the shoots were lower than the limit regulated by Drug and Food Additive Use Standard in China (Caf: 150 mg/kg; Ace: 2.5 ~ 5 mg/kg; Pb: 0.3 mg/kg; Cu: 10 mg/kg; Zn: 20 mg/kg). The migration of Cr from roots to shoots was also significantly controlled by SBLC. SBLC delayed the germination time of wheat seeds with increasing in hydrothermal temperature, the germination rate and root length showed a decreasing trend. Evans blue and O₂^- fluorescence staining of root tips also confirmed this conclusion. When the wheat was exposed to the low temperature and dose of SLBC, the chlorophyll contents and growth of wheat can be significantly increased; the oxidative damage of cell plasma membrane and net photosynthetic rate were reduced. However, 0.8 g/L of SLBC made plants suffer abiotic stress and caused oxidative damage to plants, and decreased membrane system stability. The study provides some parameters for sludge to realize resource utilization in the agricultural system.

Molecular composition and biotoxicity effects of dissolved organic matters in sludge-based carbon: Effects of pyrolysis temperature

Sludge pyrolysis carbonization has shown potential to convert sludge biomass into multifunctional carbon materials. However, ecological risks of dissolved organic matters (DOMs) with obscure molecular characteristics retaining in sludge-based carbons (SBCs) have received little attention. This study investigated the impact of pyrolysis temperatures on the molecular conversion and biotoxicity effects of DOMs in SBCs. The results revealed that DOMs in SBCs_300-400 were mainly derived from depolymerization of biopolymers and the polycondensation and cyclization of small intermediate molecules, which mainly consisted of aromatic CHON compounds with 1-3 N atoms, featuring high unsaturation and molecular weights. High-temperature pyrolysis (500-800 °C) promoted the decomposition and ring-opening of aromatic CHON compounds into saturated aliphatic CHO compounds with 2-4 O atoms in SBCs_500-800. Noteworthily, SBCs_300-400-derived DOMs showed relatively strong biotoxicity on the growth and development of wild-type zebrafish embryos, pakchoi seeds, and Vibrio qinghaiensis Q67, which was significantly related to aromatic amines, phenols, and heterocyclic-N compounds in DOMs of SBCs_300-400. SBCs_500-800-derived DOMs were mainly straight-chain fatty acids and showed no observable acute biotoxicity. This study highlights the negative impact of DOMs in SBCs on the ecological environment, and provides the theoretical basis for controlling toxic byproducts in sludge pyrolysis process.

Food-waste anaerobic digestate as a fertilizer: The agronomic properties of untreated digestate and biochar-filtered digestate residue

Anaerobic digestion produces large quantities of digestate as a by-product, which can potentially be applied as an organic fertilizer, but untreated anaerobic digestate (AD) may contain phytotoxins and the large volume of AD makes transportation and storage difficult. This study explored two relatively inexpensive processing methods to improve the agronomic performance of AD as a fertilizer via vegetable cultivation experiments. We first investigated the effect of dilution on AD's performance using four leafy vegetables (Chinese spinach, water spinach, Chinese cabbage and lettuce). The optimal concentrations of the AD were 20-40% (v/v in 250 mL applications per single-plant pot) for all four vegetables based on shoot fresh weight and comparable to the control treatment using commercial fertilizer. AD application also introduced Synergistetes bacteria into the growing medium, but the overall bacterial diversity and composition were similar to those of the control treatment. Considering the nutrient separation in the liquid and solid fractions of AD and the need to reduce the volume, we then experimented with the recovery of nutrients from both the liquid and solid fractions by filtering AD using two types of wood-based biochar (100 g biochar: 1 L AD) before applying the AD-biochar residues as side dressing at 1% (w/w). Both types of biochar achieved yields comparable to the treatment using a commercial fertilizer for the three vegetables tested (kale, lettuce and rocket salad). Our results show that dilution and biochar filtration can improve the agronomic performance of AD, making it a sustainable substitute for commercial fertilizer.

Multi-functional biochar preparation and heavy metal immobilization by co-pyrolysis of livestock feces and biomass waste

Biomass waste is a desirable additive in livestock feces biochar preparation due to its easy access, better moisture adjustment, and abundant organic content. In the present study, co-pyrolysis of livestock feces (PM: pig manure, CM: chicken manure) and biomass wastes (WC: wood chips, BS: bamboo sawdust, RH: rice husk, and CH: chaff) with different blending ratios was conducted at 600 °C to investigate the biochar characteristic and Cu/Zn immobilization performances. The results showed that WC and BS have more significant effect on the increase in fixed carbon content and heating value and the decrease in ash content of biochar. The biochar with lower pH and electrical conductivity is obtained from co-pyrolysis of manure with RH and CH. Compared with CM-based biochar, PM-based biochar presented better potential as fuel and soil remediation considering the higher heating value and lower aromatic H/C ratio. Specially, the residual fractions of Cu and Zn in PM biochar increased from 73.09% and 65.54% to 90.68% and 72.31% after 10 wt% BS addition and those in CM biochar increased from 81.07% and 73.57% to 88.87% and 84.11% after 10 wt% WC addition, which induced the lowest environmental risk of biochar. This work provided a strategy and direction for targeted enhancement in biochar characteristics with selective biomass addition during manure pyrolysis, which is beneficial to the local treatment and utilization of farm wastes.

Comprehensive evaluation of different strategies to recover methanogenic performance in ammonia-stressed reactors

In this study, strategies for recovery of ammonia-stressed AD reactors were attempted, by addition of preserved bioaugmentation consortium in gel (BioG), fresh consortium in liquid medium (BioL), woodchip biochar (BW), and straw biochar (BS). In comparison to control group with ammonia, effective treatments, i.e., BioG, BioL, BW and BS raised the maximum methane production rate by 77%, 23%, 35%, and 24%, respectively. BW possibly acted as interspecies electrical conduits for Direct Electron Transfer based on conductivity and SEM analysis. BioG facilitated slow release of bioaugmentation inocula from gel into the AD system, which protected them from a direct environmental shock. According to microbial analysis, both BioG, BioL and BW resulted in increased relative abundance of Methanothermobacter thermautotrophicus; and BS induced selective raise of Methanosarcina thermophila. The increase of methanogens via these strategies led to the faster recovery of the AD process.

Pyrolysis of Solid Digestate from Sewage Sludge and Lignocellulosic Biomass: Kinetic and Thermodynamic Analysis, Characterization of Biochar

This study investigates the pyrolysis behavior and reaction kinetics of two different types of solid digestates from: (i) sewage sludge and (ii) a mixture of sewage sludge and lignocellulosic biomass—Typha latifolia plant. Thermogravimetric data in the temperature range 25–800 °C were analyzed using Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose kinetic methods, and the thermodynamic parameters (ΔH, ΔG, and ΔS) were also determined. Biochars were characterized using different chemical methods (FTIR, SEM–EDS, XRD, heavy metal, and nutrient analysis) and tested as soil enhancers using a germination test. Finally, their potential for biosorption of NH4+, PO43−, Cu2+, and Cd2+ ions was studied. Kinetic and thermodynamic parameters revealed a complex degradation mechanism of digestates, as they showed higher activation energies than undigested materials. Values for sewage sludge digestate were between 57 and 351 kJ/mol, and for digestate composed of sewage sludge and T. latifolia between 62 and 401 kJ/mol. Characterizations of biochars revealed high nutrient content and promising potential for further use. The advantage of biochar obtained from a digestate mixture of sewage sludge and lignocellulosic biomass is the lower content of heavy metals. Biosorption tests showed low biosorption capacity of digestate-derived biochars and their modifications for NH4+ and PO43− ions, but high biosorption capacity for Cu2+ and Cd2+ ions. Modification with KOH was more efficient than modification with HCl. The digestate-derived biochars exhibited excellent performance in germination tests, especially at concentrations between 6 and 10 wt.%.

Insight into metal immobilization and microbial community structure in soil from a steel disposal dump phytostabilized with composted, pyrolyzed or gasified wastes

The soil system is a key component of the environment that can serve as a sink of pollutants. Using processed waste for aided phytostabilization of metals (HMs) in contaminated soils is an attractive phytoremediation technique that integrates waste utilization and recycling. In this study, we evaluated the effect of biologically and thermally processed wastes, i.e. sewage sludge compost (CSS), poultry feather ash (AGF) and willow chip biochar (BWC), on phytostabilization of contaminated soil from a steel disposal dump. Greenhouse experiments with Lupinus luteus L. and amendments (dosage: 3.0%, w/w) were conducted for 58 days. Soil toxicity was evaluated with Ostracodtoxkit and Phytotoxkit tests. At the end of the experiment, soil pH, plant biomass yield, and HM accumulation in plant tissues were determined. HM distribution, HM stability (reduced partition index) and potential environmental risk (mRI index) in the soil were assessed. During phytostabilization, changes in the diversity of the rhizospheric bacterial community were monitored. All amendments significantly increased soil pH and biomass yield and decreased soil phytotoxicity. AGF and BWC increased accumulation of individual HMs by L. luteus roots better than CSS (Cu and Cr, and Ni and Zn, respectively). The soil amendments did not improve Pb accumulation by the roots. Improvements in HM stability depended on amendment type: Ni and Pb stability were improved by all amendments; Zn stability, by AGF, and BWC; Cd stability, by AGF; and Cr stability, by BWC. AGF reduced the mRI most effectively. Microbial diversity in amended soils increased with time of phytostabilization and was up to 9% higher in CSS amended soil than in control soil. AGF application favored the abundance of the genera Arenimonas, Brevundimonas, Gemmatimonas and Variovorax, whose metabolic potential could have contributed to the better plant growth and lower mRI in that soil. In conclusion, AGF and BWC have great potential for restoring steel disposal dump areas, and the strategies researched here can contribute to achieving targets for sustainable development.