Adsorption and visible-light photocatalytic degradation of organic pollutants by functionalized biochar: Role of iodine doping and reactive species

Application of Biochar-Based Materials for Effective Pollutant Removal in Wastewater Treatment

With the growth of the global population and the acceleration of industrialization, the problem of water pollution has become increasingly serious, posing a major threat to the ecosystem and human health. Traditional water treatment technologies make it difficult to cope with complex pollution, so the scientific community is actively exploring new and efficient treatment methods. Biochar (BC), as a low-cost, green carbon-based material, exhibits good adsorption and catalytic properties in water treatment due to its porous structure and abundant active functional groups. However, BC's pure adsorption or catalytic capacity is limited, and researchers have dramatically enhanced its performance through modification means, such as loading metals or heteroatoms. In this paper, we systematically review the recent applications of BC and its modified materials for water treatment in adsorption, Fenton-like, electrocatalytic, photocatalytic, and sonocatalytic systems, and discuss their adsorption/catalytic mechanisms. However, most of the research in this field is at the laboratory simulation stage and still needs much improvement before it can be applied in large-scale wastewater treatment. This review improves the understanding of the pollutant adsorption/catalytic properties and mechanisms of BC-based materials, analyzes the limitations of the current studies, and investigates future directions.

Magnetic composite photocatalyst NiFe₂O₄/ZnIn₂S₄/biochar for efficient removal of antibiotics in water under visible light: Performance, mechanism and pathway

The widespread presence of antibiotics in aquatic environments, resulting from excessive use and accumulation, has raised significant concerns. A NiFe₂O₄/ZnIn₂S₄/Biochar (NFO/ZIS/BC) magnetic nanocomposite was successfully synthesized, demonstrating significantly enhanced electron-hole separation properties. Comprehensive investigations were conducted to evaluate the impact of various parameters, including catalyst mass, pH, and the presence of co-existing ions on the composite's performance. The nanoparticles of NiFe₂O₄ (NFO) and ZnIn₂S₄ (ZIS) were found to improve the surface stability and sulfamethoxazole removal capabilities of porous biochar, while also demonstrating high total organic carbon removal efficiencies. •O₂⁻ and h⁺ were identified as the predominant reactive oxygen species (ROS) in NFO/ZIS/BC-4 during the degradation process. The degradation outcomes of sulfamethoxazole under natural sunlight and water conditions were consistent with laboratory findings, affirming the robust applicative potential of NFO/ZIS/BC. Density functional theory (DFT) calculations were performed to elucidate the photocatalytic mechanism and identify potential intermediate products. Additionally, the types of heterojunctions present in the system were characterized and discussed. After multiple iterations, NFO/ZIS/BC-4 maintained effective photodegradation capabilities through five cycles. This study presents an effective method for the treatment of antibiotics in aquatic environments, offering significant potential for environmental applications.

Microwave-assisted synthesis of Ni-doped europium hydroxide for photocatalytic degradation of 4-nitrophenol

Microwave-assisted synthesis method was used to prepare europium hydroxide (Eu(OH)3) and different percentages of 1, 5, and 10 % nickel-doped Eu(OH)3 (Ni-Eu(OH)3) nanorods (NRs). X-ray diffraction study showed a hexagonal phase with an average crystallite size in the range of 21 - 35 nm for Eu(OH)3 and Ni-Eu(OH)3 NRs. FT-IR and Raman studies also confirmed the synthesis of Eu(OH)3 and Ni-Eu(OH)3. The synthesized materials showed rod-like morphology with an average length and diameter between 27 - 50 nm and 8 - 13 nm, respectively. The band gap energies of Ni-Eu(OH)3 NRs were reduced (4.06 - 3.50 eV), which indicates that the doping of Ni2+ ions has influenced the band gap energy of Eu(OH)3. The PL study exhibited PL quenching with Ni doping. The photocatalytic degradation of 4-nitrophenol (4-NP) by the synthesized materials under UV light irradiation was investigated, in which 10 % Ni-Eu(OH)3 NRs showed the best response. A kinetic study was also conducted which shows pseudo-first-order kinetics. Based on this, Ni-Eu(OH)3 NRs have shown a potential to be a UV-light active material for photocatalysis.

Sorption of Iodine on Biochar Derived from the Processing of Urban Sludge and Garden Waste at Different Pyrolysis Temperatures

The United Nations proposed the Sustainable Development Goals with the aim to make human settlements in cities resilient and sustainable. The excessive discharge of urban waste including sludge and garden waste can pollute groundwater and lead to the emission of greenhouse gases (e.g., CH4). The proper recycling of urban waste is essential for responsible consumption and production, reducing environmental pollution and addressing climate change issues. This study aimed to prepare biochar with high adsorption amounts of iodine using urban sludge and peach wood from garden waste. The study was conducted to examine the variations in the mass ratio between urban sludge and peach wood (2/1, 1/1, and 1/2) as well as pyrolysis temperatures (300 °C, 500 °C, and 700 °C) on the carbon yield and adsorption capacities of biochar. Scanning electron microscopy, Brunauer-Emmett-Teller analysis, Fourier transform infrared spectrometry, powder X-ray diffraction, and elemental analysis were used to characterize the biochar produced at different pyrolysis temperatures and mass ratios. The results indicate that the carbon yield of biochar was found to be the highest (>60%) at a pyrolysis temperature of 300 °C across different pyrolysis temperatures. The absorbed amounts of iodine in the aqueous solution ranged from 86 to 223 mg g-1 at a mass ratio of 1:1 between urban sludge and peach wood, which were comparably higher than those observed in other mass ratios. This study advances water treatment by offering a cost-effective method by using biochar derived from the processing of urban sludge and garden waste.

Bio-based matrix photocatalysts for photodegradation of antibiotics

Antibiotics development during the last century permitted unprecedent medical advances. However, it is undeniable that there has been an abuse and misuse of antimicrobials in medicine and cosmetics, food production and food processing, in the last decades. The pay toll for human development and consumism is the emergence of extended antimicrobial resistance and omnipresent contamination of the biosphere. The One Health concept recognizes the interconnection of human, environmental and animal health, being impossible alter one without affecting the others. In this context, antibiotic decontamination from water-sources is of upmost importance, with new and more efficient strategies needed. In this framework, light-driven antibiotic degradation has gained interest in the last few years, strongly relying in semiconductor photocatalysts. To improve the semiconductor properties (i.e., efficiency, recovery, bandgap width, dispersibility, wavelength excitation, etc.), bio-based supporting material as photocatalysts matrices have been thoroughly studied, exploring synergetic effects as operating parameters that could improve the photodegradation of antibiotics. The present work describes some of the most relevant advances of the last 5 years on photodegradation of antibiotics and other antimicrobial molecules. It presents the conjugation of semiconductor photocatalysts to different organic scaffolds (biochar and biopolymers), then to describe hybrid systems based on g-C3N4 and finally addressing the emerging use of organic photocatalysts. These systems were developed for the degradation of several antibiotics and antimicrobials, and tested under different conditions, which are analyzed and thoroughly discussed along the work.

Adsorption-photocatalytic degradation abilities of γ-irradiated chitosan-ZnO-AgNP composite for organic dye removal and antibacterial activity

We synthesized a γ-irradiated chitosan-ZnO-AgNPs (ICZA) composite by using a simple hydrogels method. We evaluated its adsorption/photocatalytic degradation abilities for the removal of an organic dye and its antibacterial activity. The XRD, SEM, TEM, EDS, and FTIR techniques were used to characterize the obtained samples. Based on the adsorption and degradation of methylene blue (MB) in the dark and under UV light irradiation, the adsorption and the photocatalytic activity of the as-obtained samples were evaluated. The optimum conditions for synthesizing the composite were as follows: contact time of 210 min, a dosage of 2 g/L, MB concentration of 40 mg/L, and a solution pH of 8.0. The ICZA had a high adsorption capacity, which was suitable for removing MB from the aqueous solutions; it showed a maximum adsorption capacity (qm) of 92.59 mg/g. The fit of the adsorption isotherms with the Langmuir model was satisfactory. The photocatalytic degradation ability of the composite was also better than that of other catalysts in the presence of UV light, with an apparent rate constant (kapp) of 3.08 × 10-2. The synthesized ICZA also showed good antibacterial activity against Staphylococcus aureus, with a minimum inhibitory concentration (MIC) and a minimum bactericidal concentration (MBC) of 12.5 g/mL and 50 g/mL under light-incubation and dark-incubation conditions. Finally, we discussed the hypothesized mechanism of the adsorption/photocatalytic activity and antibacterial activity of the ICZA composite in this study.

Bamboo-based magnetic activated carbon for efficient removal of sulfadiazine: Application and adsorption mechanism

Due to increasing antibiotic pollution in the water environment, green and efficient adsorbents are urgently needed to solve this problem. Here we prepare magnetic bamboo-based activated carbon (MDBAC) through delignification and carbonization using ZnCl₂ as activator, resulting in production of an activated carbon with large specific surface area (1388.83 m² g^-1). The influencing factors, such as solution pH, initial sulfadiazine (SD) concentration, temperature, and contact time, were assessed in batch adsorption experiments. The Langmuir isotherm model demonstrated that MDBAC adsorption capacity on SD was 645.08 mg g^-1 at its maximum, being higher than majority of previously reported adsorbents. In SD adsorption, the kinetic adsorption process closely followed the pseudo-second kinetic model, and the thermodynamic adsorption process was discovered to be exothermic and spontaneous in nature. The MDBAC exhibited excellent physicochemical stability, facile magnetic recovery and acceptable recyclability properties. Moreover, the synergistic interactions between MDBAC and SD mainly involved electrostatic forces, hydrogen bonding, π-π stacking, and chelation. Within the benefits of low cost, ease of production and excellent adsorption performance, the MDBAC biosorbent shows promising utilization in removing antibiotic contaminants from wastewater.

Adsorption and photodegradation of reactive red 120 with nickel-iron-layered double hydroxide/biochar composites

Layered double hydroxide (LDH) materials were widely applied for adsorption and photodegradation of pollutants for wastewater treatment. New efficient LDH materials with adsorption and photodegradation abilities will be promising candidates for pollutants removal. Hence, a series of NiFe-LDH/biochar (NiFe/BC) were fabricated by the coprecipitation method for synergistic adsorption and photodegradation anionic dyes of reactive red 120 (RR120). The removal experiment showed that the addition of an appropriate amount of biochar into NiFe-LDH enhanced the adsorption capacity and its photocatalytic ability. The optimized NiFe/BC2 composite can remove 88.5 % of RR120 under visible light by adsorption and photocatalysis, which was much better than NiFe-LDH (63.3 %) and biochar (2.6 %). The photodegradation kinetic constant of the NiFe/BC2 composite was 3.1 and 104.8 times that of NiFe-LDH and BC. In addition, active species capture experiments and electron spin resonance (ESR) tests revealed the removal mechanisms of NiFe/BC composites for RR120 removal. This work affords a feasible strategy for preparing LDH-based photocatalyst with excellent adsorption and photocatalytic performance for wastewater treatment.

Porous adsorbent derived from acid activation of food waste biochar: A sustainable approach for novel removal chlorophenol in wastewater

In this study, porous biochar (PBC) was prepared by acid activation of biochar derived from food waste (FWBC) and used as a suitable approach for the removal of 4-chlorophenol (CP) in wastewater. The characterization of PBC and the influent of different experimental conditions are determined. After the acid activation process, the surface area, porosity, and functional groups of PBC were developed. The removal performances of CP (1 mg/L) by PBC and FWBC were archived at 97.8 and 82.1%, respectively. Adsorption kinetics and isotherms of CP were followed by the second-order and Langmuir models, respectively. The maximum capacities of CP uptake onto mono-layer of FWBC and PBC based on the Langmuir model were determined at 79.8 and 108.7 mg/g, respectively. Besides, PBC could remove more than 89% CP from wastewater within 45 min of reaction time and it is suitable to reuse 8 times with over 60% adsorption efficiency of CP. In addition, the adsorption mechanism and environmental impact were discussed in detail. This work could bring a sustainable approach to the treatment of CP in wastewater as well as the management of food waste in Vietnam.

An updated review on environmental occurrence, scientific assessment and removal of brominated flame retardants by engineered nanomaterials

Due to the extensive manufacturing and use of brominated flame retardants (BFRs), they are known to be hazardous, bioaccumulative, and recalcitrant pollutants in various environmental matrices. BFRs make flame-resistant items for industrial purposes (textiles, electronics, and plastics equipment) that are disposed of in massive amounts and leak off in various environmental matrices. The consumption of plastic items has expanded tremendously during the COVID-19 pandemic which has resulted into the increasing load of solid waste on land and water. Some BFRs, such as polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCDs), are no longer utilized or manufactured owing to their negative impacts, which promotes the utilization of new BFRs as alternatives. BFRs have been discovered worldwide in soil, sludge, water, and other contamination sources. Various approaches such as photocatalysis-based oxidation/reduction, adsorption, and heat treatment have been found to eradicate BFRs from the environment. Nanomaterials with unique properties are one of the most successful methodologies for removing BFRs via photocatalysis. These methods have been praised for being low-cost, quick, and highly efficient. Engineered nanoparticles degraded BFRs when exposed to light and either convert them into safer metabolites or completely mineralize. Scientific assessment of research taking place in this area during the past five years has been discussed. This review offers comprehensive details on environmental occurrence, toxicity, and removal of BFRs from various sources. Degradation pathways and different removal strategies related to data have also been presented. An attempt has also been made to highlight the research gaps prevailing in the current research area.

Nanomaterial-enabled photothermal-based solar water disinfection processes: Fundamentals, recent advances, and mechanisms

The pathogenic microorganisms in water pose a great threat to human health. Photothermal and photothermocatalytic disinfection using nanomaterials (NPs) has offered a promising and effective strategy to address the challenges in solar water disinfection (SODIS), especially in the point-of-use operations. This review aims at providing comprehensive and state-of-the-art knowledge of photothermal-based disinfection by NPs. The fundamentals and principles of photothermal-based disinfection were first introduced. Then, recent advances in developing photothermal/photothermocatalytic catalysts were systematically summarized. The light-to-heat conversion and disinfection performance of a large variety of photothermal materials were presented. Given the complicated mechanisms of photothermal-based disinfection, the attacks from reactive oxygen species and heat, the destruction of bacterial cells, and the antibacterial effects of released metal ions were highlighted. Finally, future challenges and opportunities associated with the development of cost-effective photothermal/photothermocatalytic disinfection systems were outlined. This review will provide guidance in designing future NPs and inspire more research efforts from environmental nano-communities to move towards practical water disinfection operations.

Effectively compound the heterojunction formed by flower-like Bi2S3 and g-C3N4 to enhance photocatalytic activity

In this study, the flower-shaped Bi₂S₃/g-C₃N₄-2.6 heterojunction obtained by solvothermal method and its photocatalytic degradation efficiency of rhodamine B (RhB) and tetracycline (TC) in aqueous solution within 40 min is as high as 98.8% and 94.6%. For RhB degradation, the photocatalytic reaction rate constant (k) of Bi₂S₃/g-C₃N₄-2.6 is approximately 1.8 and 45.5 times that of Bi₂S₃ and g-C₃N₄. For TC, k is 3.1 and 2.4 times that of Bi₂S₃ and g-C₃N₄, respectively. The key to determining the high catalytic activity of Bi₂S₃/g-C₃N₄ lies in the formation of a good heterojunction between Bi₂S₃ and g-C₃N₄, which accelerates the electron transfer rate between the heterojunction interface and effectively avoids electron-hole recombination. The effects of catalyst dosage, different pH values, inorganic anions, and capture agents on the photodegradation performance of RhB were investigated. The results show that the catalyst dosage is 1.33 g/L, and the solution pH is in the range of 5-9, which has the best removal effect on pollutants, and the isolation of holes (h⁺) with strong oxidizing ability promotes the collapse of pollutant molecules. Combined with electrochemical tests, a possible degradation mechanism was advised.

A modified flower pollen-based photothermocatalytic process for enhanced solar water disinfection: Photoelectric effect and bactericidal mechanisms

Solar disinfection (SODIS) is regarded as an affordable and effective point-of-use (POU) water disinfection treatment urgently needed in rural developing world. This work developed an enhanced SODIS scheme that utilized a novel flower pollen-based catalyst (Te-TRP). The bench-scale experiments demonstrated 100% photothermocatalytic inactivation of approximately 7-log E. coli K-12, Spingopyxis sp. BM1-1, or S. aureus bacterium by Te-TRP within 40-60 min. Moving toward practical device design, we constructed a flow-through reactor and demonstrated the outstanding water disinfection performance of Te-TRP. The in-depth mechanistic study revealed the synergetic effect between photocatalysis and photothermal conversion and identified the bacterial inactivation pathway. ¹O₂ and ·O₂^¯ were verified to be the dominant reactive oxygen species involved in the bacterial inactivation. The damage to bacterial cells caused by photothermocatalytic reactions was systematically investigated, demonstrating the cell membrane destruction, the loss of enzyme activity, the increased cell membrane permeability, and the complete inactivation of bacteria without the viable but nonculturable state cells. This work not only affords a facile approach to preparing biomaterial-based catalysts capable of efficient photothermocatalytic bacterial inactivation, but also proposes a prototype of POU water treatment, opening up an avenue for sustainable environmental remediation.

Adsorption-enhanced photocatalytic property of Ag-doped biochar/g-C3N4/TiO2 composite by incorporating cotton-based biochar

In this study, the biochar obtained from waste cotton fibers was introduced into the Ag-doped g-C3N4/TiO2 hybrid composite through a facile one-step hydrothermal process. The morphology, elemental composition, crystal structure, microstructure, specific surface area, chemical bonding state, energy band structure, and separation efficiency of photoinduced charge carriers of the resultant composite were examined using scanning electron microscope, energy dispersive X-ray spectrometer, X-ray diffractometer, transmission electron microscope, surface area analyzer, X-ray photoelectron spectroscope, Ultraviolet-visible spectrophotometer, ultraviolet photoelectron spectroscope, and photoluminescence spectroscope. The adsorption isotherms, kinetics and thermodynamics of the biochar, Ag-doped g-C3N4/TiO2 and Ag-doped biochar/g-C3N4/TiO2 were evaluated using the model methyl orange dye. The photoacatalytic degradation of the model pollutants including methyl orange, methylene blue, congo red, and tetracycline hydrochloride and the photocatalytic reduction of Cr(VI) ions were also assessed under visible light. Experimental results indicated that the photocatalytic property of the Ag-doped biochar/g-C3N4/TiO2 was significantly enhanced through the adsorption enhancement compared with the Ag-doped g-C3N4/TiO2. This was due to the uniform doping of multi-scale porous biochar with g-C3N4 nanosheet, Ag and TiO2 nanoparticles. The adsorptive enhancement induced by the biochar resulted in the narrowed band gap, suitable electronic energy band structure, and fast separation of photoinduced charge carriers of the Ag-doped biochar/g-C3N4/TiO2, which was probably due to the coexistence of multi-valence Ti+4/+3 and Ag0/+1 species and oxygen-containing groups of biochar. The major reactive species of the Ag-doped biochar/g-C3N4/TiO2 were 1O2 and h+. The MO dye adsorption onto the Ag-doped biochar/g-C3N4/TiO2 followed the Langmuir isotherm model, pseudo-first-order and pseudo-second-order kinetic models, and the adsorption process was an endothermic reaction with entropy reduction effects. As such, the Ag-doped biochar/g-C3N4/TiO2 exhibited a promising application for the treatment of wastewater containing multi-pollutants especially organic dyes and heavy metal ions.

Emerging Pollutants in Moroccan Wastewater: Occurrence, Impact, and Removal Technologies

The rapid growth of anthropogenic activities in recent decades has resulted in the appearance of numerous new chemical compounds in the environment, known as “emerging pollutants” (EPs) or “contaminants of emerging concern” (CECs). Although partially or not yet regulated or monitored, there is growing research interest in these EPs among the scientific community because of their bioaccumulation, persistence, and adverse effects. Among these, endocrine disruptors, pesticides, and pharmaceuticals can have harmful impacts on human health and the ecosystem. Conventional wastewater treatment technologies are not effective in removing these contaminants, allowing them to be released into the receiving environment. In order to improve the understanding of emerging pollutants, this review discusses the source, occurrence, and impacts of bisphenol A, atrazine, amoxicillin, and paracetamol as model molecules of emerging environmental pollutants, an issue that remains underrepresented in Morocco. Then, treatment methods for EPs are reviewed, including adsorption, advanced oxidation processes, biodegradation, and hybrid treatment. It is proposed that adsorption and photocatalysis can be used as simple, effective, and environmentally friendly technologies for their removal. Thus, we summarize some of the adsorbent and photocatalyst materials applied in recent work to control these pollutants. Towards the end of this paper, the development of inexpensive and locally available (Morocco) materials to remove these compounds from wastewater is considered.