Volatile aldehyde emissions from "sub-ohm" vaping devices

Physical and chemical characterizations of a reference e-cigarette used in animal testing

A minimal necessary condition for preclinical studies to contribute to risk assessments of e-cigarettes (ECs) is the ability to expose laboratory animals to an appropriate dosage of aerosols. In this study, we examined the fulfilment of this essential consistency condition for the ECX-Joyetech E-Vic Mini (ECX), a piece of computerized exposure equipment manufactured by SCIREQ, which has been employed by numerous in vivo testing. We began by calibrating the customary Evic VTC mini device mod and the 4 coils available, reproducing in the laboratory the operation of the ECX in the power-control and temperature-control modes, using puffing parameters recommended by its documentation. We then conducted the following tests for each coil: (1) verifying whether the generated aerosols satisfy an optimal operational regime, free from overheating, as determined by a linear relation between the mass of vaporized e-liquid vs. supplied power and (2) obtaining the mean yields of aldehydes for each of the tested power settings and coils. The results of these tests show that, under the main conditions used in in vivo testing, the ECX equipment fails to comply with these consistency requirements, especially for coils with low subohm resistance, a shortcoming that can be corrected by applying much larger airflows for these coils. Therefore, the outcomes of preclinical studies using the ECX equipment should be examined with great scepticism and subjected to further testing.

Making Every Single Puff Count-Simple and Sensitive E-Cigarette Aerosol Sampling for GCxIMS and GC-MS Analysis

The analysis of the aerosol from tobaccoless electronic cigarettes (e-cigarettes) is an important part of understanding their impact on human health, yet sampling aerosol from e-cigarettes is still considered a challenge. It lacks a standard method for research and quality control and there are a variety of methods. However, few are simple and inexpensive, and none have been suggested for the use with gas chromatography coupled ion mobility spectrometry (GCxIMS). This work presents and evaluates such a setup made from standard lab equipment to quickly collect a quantitative sample from the aerosol of a single puff (5 s totaling 125 mL). The aerosol condensates directly in the cooled headspace (HS) vial, which is analyzed in the HS-GCxIMS or mass spectrometer (HS-GC-MS). The combined use of GC-MS and GCxIMS allows the simple and sensitive identification of unknown substances in complex mixtures and the identification of degradation products in the aerosols. A calibration of 26 flavor compounds (0.2-20 µg/g) was created using single puffs of a spiked, flavorless commercial refill solution and 2-alkanones as internal standards. This sensitive but easily reproducible setup enables a wide range of further investigations, even for labs that were previously unable to afford it.

Carbonyls and Aerosol Mass Generation from Vaping Nicotine Salt Solutions Using Fourth- and Third-Generation E-Cigarette Devices: Effects of Coil Resistance, Coil Age, and Coil Metal Material

Aerosol formation and production yields from 11 carbonyls (carbonyl concentration per aerosol mass unit) were investigated (1) from a fourth-generation (4th gen) e-cigarette device at different coil resistances and coil age (0-5000 puffs) using unflavored e-liquid with 2% benzoic acid nicotine salt, (2) between a sub-ohm third-generation (3rd gen) tank mod at 0.12 Ω and a 4th gen pod at 1.2 Ω using e-liquid with nicotine salt, together with nicotine yield, and (3) from 3rd gen coils of different metals (stainless steel, kanthal, nichrome) using e-liquid with freebase nicotine. Coil resistance had an inverse relationship with coil temperature, and coil temperature was directly proportional to aerosol mass formation. Trends in carbonyl yields depended on carbonyl formation mechanisms. Carbonyls produced primarily from thermal degradation chemistry (e.g., formaldehyde, acetaldehyde, acrolein, propionaldehyde) increased per aerosol mass with higher coil resistances, despite lower coil temperature. Carbonyls produced primarily from chemistry initiated by reactive oxygen species (ROS) (e.g., hydroxyacetone, dihydroxyacetone, methylglyoxal, glycolaldehyde, lactaldehyde) showed the opposite trend. Coil age did not alter coil temperature nor aerosol mass formation but had a significant effect on carbonyl formation. Thermal carbonyls were formed optimally at 500 puffs in our study and then declined to a baseline, whereas ROS-derived carbonyls showed a slow rise to a maximum trend with coil aging. The 3rd gen versus 4th gen device comparison mirrored the trends in coil resistance. Nicotine yields per aerosol mass were consistent between 3rd and 4th gen devices. Coil material did not significantly alter aerosol formation nor carbonyl yield when adjusted for wattage. This work shows that sub-ohm coils may not necessarily produce higher carbonyl yields even when they produce more aerosol mass. Furthermore, carbonyl formation is dynamic and not generalizable during the coil's lifetime. Finally, studies that compare data across different e-cigarette devices, coil age, and coil anatomy should account for the aerosol chemistry trends that depend on these parameters.

Multi-omic assessment shows dysregulation of pulmonary and systemic immunity to e-cigarette exposure

Electronic cigarette (Ecig) use has become more common, gaining increasing acceptance as a safer alternative to tobacco smoking. However, the 2019 outbreak of Ecig and Vaping-Associated Lung Injury (EVALI) alerted the community to the potential for incorporation of deleterious ingredients such as vitamin E acetate into products without adequate safety testing. Understanding Ecig induced molecular changes in the lung and systemically can provide a path to safety assessment and protect consumers from unsafe formulations. While vitamin E acetate has been largely removed from commercial and illicit products, many Ecig products contain additives that remain largely uncharacterized. In this study, we determined the lung-specific effects as well as systemic immune effects in response to exposure to a common Ecig base, propylene glycol and vegetable glycerin (PGVG), with and without a 1% addition of phytol, a diterpene alcohol that has been found in commercial products. We exposed animals to PGVG with and without phytol and assessed metabolite, lipid, and transcriptional markers in the lung. We found both lung-specific as well as systemic effects in immune parameters, metabolites, and lipids. Phytol drove modest changes in lung function and increased splenic CD4 T cell populations. We also conducted multi-omic data integration to better understand early complex pulmonary responses, highlighting a central enhancement of acetylcholine responses and downregulation of palmitic acid connected with conventional flow cytometric assessments of lung, systemic inflammation, and pulmonary function. Our results demonstrate that Ecig exposure not only leads to changes in pulmonary function but also affects systemic immune and metabolic parameters.

Critical Review of the Recent Literature on Organic Byproducts in E-Cigarette Aerosol Emissions

We review the literature on laboratory studies quantifying the production of potentially toxic organic byproducts (carbonyls, carbon monoxide, free radicals and some nontargeted compounds) in e-cigarette (EC) aerosol emissions, focusing on the consistency between their experimental design and a realistic usage of the devices, as determined by the power ranges of an optimal regime fulfilling a thermodynamically efficient process of aerosol generation that avoids overheating and "dry puffs". The majority of the reviewed studies failed in various degrees to comply with this consistency criterion or supplied insufficient information to verify it. Consequently, most of the experimental outcomes and risk assessments are either partially or totally unreliable and/or of various degrees of questionable relevance to end users. Studies testing the devices under reasonable approximation to realistic conditions detected levels of all organic byproducts that are either negligible or orders of magnitude lower than in tobacco smoke. Our review reinforces the pressing need to update and improve current laboratory standards by an appropriate selection of testing parameters and the logistical incorporation of end users in the experimental design.

E-Cigarettes Use Behaviors in Japan: An Online Survey

Electronic cigarette (e-cigarette) use has become increasingly widespread throughout the world, including in Japan. However, little is known about how e-cigarettes are used in Japan, a country with heavy restrictions on nicotine-containing e-liquids and/or vaping products. This study examined e-cigarette use (e-cigarette use duration, frequency of use, device type, electrical resistance, nicotine use, favorite e-liquid flavors) among users in Japan, through an online survey using a web-based self-reported questionnaire which included questions about sex, age, combustible cigarette and heated tobacco product (HTP) use behaviors. Of 4689 e-cigarettes users analyzed, 93.5% were men and 52.9% had been using e-cigarettes for 1–3 years. Over 80% used e-cigarettes every day; 62.3% used nicotine liquid, and half of the nicotine liquid users used nicotine salt. The most popular liquid flavor was fruit (prevalence: 68.1%), followed by tobacco (prevalence: 48.4%). While 50.9% were e-cigarette single users, 35.2% were dual users (e-cigarettes and cigarettes or HTPs) and 13.8% were triple user (e-cigarettes, cigarettes and HTPs). This is the first comprehensive survey of Japanese e-cigarette users and our finding suggest more than half use nicotine liquid, although e-cigarettes containing nicotine liquid have been prohibited by the Pharmaceutical Affairs Act since 2010 in Japan. The study also showed 49.1% of participants used cigarettes and/or HTPs concurrently (dual or triple users).