Characterization of Rheum ribes with ZnO nanoparticle and its antidiabetic, antibacterial, DNA damage prevention and lipid peroxidation prevention activity of in vitro

Phytogenic-Mediated Zinc Oxide Nanoparticles Using the Seed Extract of Citrullus lanatus and Its Integrated Potency against Multidrug Resistant Bacteria

In the current research study, zinc oxide nanoparticles (ZnO-NPs) were synthesized via a green synthesis technique using the seed extract of Citrullus lanatus. The study further intended to evaluate the potential synergistic effects of ZnO-NPs with antibiotics against multidrug resistant (MDR) bacteria. It was observed that C. lanatus seed extracts obtained by n-hexane and methanolic solvents revealed the presence of constituents, such as tannins, flavonoids, and terpenoids. Furthermore, the extract of n-hexane displayed the strongest antibacterial activity against Yersinia species (17 ± 1.2 mm) and Escherichia coli (17 ± 2.6 mm), while the methanolic extract showed the maximum antibacterial activity against E. coli (17 ± 0.8 mm). Additionally, the ZnO-NP synthesis was confirmed by ultraviolet-visible analysis with a characteristic absorption peak at 280 nm. The Fourier transform infrared spectroscopy analysis suggested the absorption peaks in the 500-3800 cm-1 range, which corresponds to various groups of tertiary alcohol, aldehyde, amine, ester, aromatic compounds, thiol, amine salt, and primary amine. The scanning electron microscopy spectra of ZnO-NPs demonstrated the presence of zero-dimensional spherical particles with well-dispersed character. Moreover, encapsulation with ZnO-NPs improved the antimicrobial activity of antibiotics against the panel of MDR bacteria, and the increases in the effectiveness of particular antibiotics against MDR bacteria were significant (P = 0.0005). In essence, the synthesized ZnO-NPs have the potential as drug carriers with powerful bactericidal properties that work against MDR bacterial strains. These outcomes are an indication of such significance in pharmaceutical science, giving possibilities for further research and development in this field.

Preparation of bio-synthesized Ag nanoparticles and assessment of their antidiabetic and antioxidant potential against STZ-induced diabetic albino rats

Bio-synthesized silver nanoparticles (AgNPs) were successfully obtained using the leaf extract from Ventilago maderaspatana. Extensive analysis was conducted to evaluate the physical and chemical characteristics of the bioderived AgNPs. XRD analysis confirmed their cubic structure, and revealed a well-defined size distribution with average crystallite size of 11.7  nm. FE-SEM and TEM images visually supported the observed size range. The presence of plant-mediated phytochemicals on the surface of AgNPs was confirmed through DLS, FTIR, and TGA/DTA studies. To assess their antidiabetic potential, rats were induced with streptozotocin, resulting in elevated levels of biochemical parameters associated with diabetes. Conversely, serum insulin levels (2.50 ± 0.55) and glucokinase activity (64.50 ± 8.66) decreased. However, treatment with AgNPs demonstrated a dose-dependent reduction in blood glucose, total protein, albumin, and HbA1c levels, effectively restoring them to normal ranges. Moreover, the treatment significantly increased insulin levels (7.55 ± 0.63) and glucokinase activity (121.50 ± 4.60), indicating the antidiabetic potential of V. maderaspatana-mediated AgNPs. Notably, the exitance of phytochemicals, like flavonoids and phenols, on the surface of AgNPs facilitated their ability to neutralize reactive oxygen species (ROS) through electron donation. This property enhanced their overall antidiabetic efficiency.

Perspectives on Usage of Functional Nanomaterials in Antimicrobial Therapy for Antibiotic-Resistant Bacterial Infections

The clinical applications of nanotechnology are emerging as widely popular, particularly as a potential treatment approach for infectious diseases. Diseases associated with multiple drug-resistant organisms (MDROs) are a global concern of morbidity and mortality. The prevalence of infections caused by antibiotic-resistant bacterial strains has increased the urgency associated with researching and developing novel bactericidal medicines or unorthodox methods capable of combating antimicrobial resistance. Nanomaterial-based treatments are promising for treating severe bacterial infections because they bypass antibiotic resistance mechanisms. Nanomaterial-based approaches, especially those that do not rely on small-molecule antimicrobials, display potential since they can bypass drug-resistant bacteria systems. Nanoparticles (NPs) are small enough to pass through the cell membranes of pathogenic bacteria and interfere with essential molecular pathways. They can also target biofilms and eliminate infections that have proven difficult to treat. In this review, we described the antibacterial mechanisms of NPs against bacteria and the parameters involved in targeting established antibiotic resistance and biofilms. Finally, yet importantly, we talked about NPs and the various ways they can be utilized, including as delivery methods, intrinsic antimicrobials, or a mixture.

Superhydrophilic quaternized calcium alginate based aerogel membrane for oil-water separation and removal of bacteria and dyes

In recent years, frequent oil spills and increasing industrial wastewater discharge have caused serious water pollution problems. In addition, there are often microbial and dye pollutants in oil-containing wastewater. The development of materials that can simultaneously treat these three pollutants is very important for the safe treatment and recovery of wastewater. In this work, a modified calcium alginate-based aerogel membrane (CTW) was prepared through sol spraying, Ca²⁺ crosslinking and freeze drying by using tetrabutylammonium hydroxide (TBA) quaternary ammonium salt modified sodium alginate (SA) as raw material and waterborne polyurethane (WPU) as adhesive. The results show that CTW membrane has super hydrophilic and underwater super-oleophobic properties, and can realize the separation oil-water emulsions under gravity, with the separation efficiency of >99 %. CTW membrane can also remove bacteria and dye such as Congo red from water by filtration, with removal rates of 100 % and 99 % respectively. The filtration results of mixed wastewater show that CTW membrane can realize one-step separation of oil, bacteria and dye in wastewater, and can also be recycled, having potential application prospect.

Chitosan-Salicylic acid and Zinc sulphate nano-formulations defend against yellow rust in wheat by activating pathogenesis-related genes and enzymes

Stripe rust instigated by Puccinia striiformis f. sp. tritici causes major yield loss in wheat. In this study, disease resistance was induced in wheat by pre-activation of pathogenesis related (PR) genes using two different nano-formulations (NFs) i.e. Chitosan- Salicylic acid (SA) NFs (CH-NFs) and Zinc sulphate NFs (Zn-NFs). These NFs were synthesized using green approach and were characterized using various techniques. Both NFs effectively controlled stripe rust in wheat genotypes (WH 711 and WH 1123) by significantly increasing activities of phenylalanine ammonia lyase, tyrosine ammonia lyase and polyphenol oxidase enzymes when compared with disease free-control and diseased plants. Total soluble sugar (TSS) level was highest in CH-NF treated plants. TSS was also relatively higher in diseased plants than disease free-control as well as Zn-NF treated plants. Both CH-NFs and Zn-NFs induced the expression of PR genes. In CH-NF treated plants, the relative expression of PR genes was higher on the 3rd day after spraying (DAS) of NFs as compared to diseased and Zn-NF treated plants in both the genotypes. While in case of Zn-NF treated plants, relative expression of PR genes was higher on 5th DAS as compared to diseased and disease free-control plants. Early rise in expression of PR genes due to NF treatments was responsible for disease resistance in both the wheat genotypes as evidenced by a lower average coefficient of infection. These NFs can be synthesized easily with low cost input, are eco-friendly and can be effectively used against yellow rust as well as other wheat diseases.

Efficient green photocatalyst of silver-based palladium nanoparticles for methyle orange photodegradation, investigation of lipid peroxidation inhibition, antimicrobial, and antioxidant activity

Nanotechnology is an interdisciplinary study that has been developing worldwide in recent years and has a serious impact on human life. The fact that the nanoparticles of plant origin are clean, non-toxic, and biocompatible has enabled new fields of study. The Hibiscus sabdariffa (H. sabdariffa) plant has been attracted by scientists because of its impact on health and many other areas. The lipid peroxidation inhibiting activity, antioxidant properties, and antimicrobial properties of H. sabdariffa plant with Ag-Pd metal was ditermined. For the total phenolic component, gallic acid was used as the standard and quarcetin was used for the total flavonoid. The lipid peroxidation inhibition activity of Ag-Pd NPs in ethanol extract was found to be very well compared to the positive control (BHA). The lowest and highest concentrations of DPPH radical scavenging activity were 82.178-97.357%, whereas for BHA these values were found to be 84.142-94.142%. The highest concentration of Ag-Pd NPs at 200 μg/mL the DPPH radical quenching activity was higher than BHA. Ag-Pd NPs showed a good antimicrobial activity against certain pathogenic microorganisms such as Bacillus subtilis, Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Candida albicans, which are the causative agents of various diseases in humans. The photodegradation activity of Ag-Pd NPs also investigated against Methyl orange dye (MO) under sunlight irradiation for 120 min and was found to be as 67.88.

Current Research on Zinc Oxide Nanoparticles: Synthesis, Characterization, and Biomedical Applications

Zinc oxide nanoparticles (ZnO-NPs) have piqued the curiosity of researchers all over the world due to their extensive biological activity. They are less toxic and biodegradable with the capacity to greatly boost pharmacophore bioactivity. ZnO-NPs are the most extensively used metal oxide nanoparticles in electronic and optoelectronics because of their distinctive optical and chemical properties which can be readily modified by altering the morphology and the wide bandgap. The biosynthesis of nanoparticles using extracts of therapeutic plants, fungi, bacteria, algae, etc., improves their stability and biocompatibility in many biological settings, and its biofabrication alters its physiochemical behavior, contributing to biological potency. As such, ZnO-NPs can be used as an effective nanocarrier for conventional drugs due to their cost-effectiveness and benefits of being biodegradable and biocompatible. This article covers a comprehensive review of different synthesis approaches of ZnO-NPs including physical, chemical, biochemical, and green synthesis techniques, and also emphasizes their biopotency through antibacterial, antifungal, anticancer, anti-inflammatory, antidiabetic, antioxidant, antiviral, wound healing, and cardioprotective activity. Green synthesis from plants, bacteria, and fungus is given special attention, with a particular emphasis on extraction techniques, precursors used for the synthesis and reaction conditions, characterization techniques, and surface morphology of the particles.

Physicochemical Properties and Antibacterial Activity of Gellan Gum Incorporating Zinc Oxide/Carbon Nanotubes Bionanocomposite Film for Wound Healing

Wound healing dressing based on a natural polymer of gellan gum incorporating zinc oxide nanoparticles and multiwall carbon nanotubes (GG/ZnONP + MWCNT) bionanocomposite film was fabricated via the solution casting method. The physicochemical properties of the film were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). Moreover, the antibacterial properties of the bionanocomposite film were investigated for wound healing applications. The characterization results confirmed the reinforcement of the gellan gum (GG) matrix with zinc oxide nanoparticles (ZnONP) and multiwall carbon nanotubes (MWCNT), as an amorphous GG/ZnONP + MWCNT bionanocomposite film was obtained. SEM morphological analysis shows that the addition of ZnONP and MWCNT nanofillers changed the film microstructure into a sponge-like structure that is more suitable for fluid uptake and thus more useful for wound healing. The GG/ZnONP + MWCNT bionanocomposite film demonstrated good antibacterial activity against all strains tested. Furthermore, macroscopic analysis shows that the wound treated with GG/ZnONP + MWCNT bionanocomposite film recovered completely (100%) in 14 days, compared to pure GG film (90.76%) and negative control (77.40%). As a result, the GG/ZnONP + MWCNT bionanocomposite film could be a promising wound dressing material.

Green synthesis, characterizations of silver nanoparticles using sumac (Rhus coriaria L.) plant extract and their antimicrobial and DNA damage protective effects

Today, antimicrobial resistance against bacteria has become an important global public health problem. In this sense, the development of new biomedical solutions is becoming increasingly important. Especially plant-based nanoparticles produced by green synthesis are used in many fields. AgNPs have an important place in nanoscience and nanotechnology, especially in nanomedicine. Therefore, the present study was conducted to synthesize AgNPs using the medicinal plant extract sumac and to characterize them using advanced techniques and to determine the antibacterial activity of some bacteria that cause disease. Nanoparticles produced by green synthesis are used in a wide area around the world due to their many advantages such as environmentally friendly, economically and non-toxically. In this study, AgNPs were biosynthesized using sumac extract and evaluated for their antibacterial potency against Bacillus cereus, Bacillus subtilis, Enterococcus faecalis, Pseudomonas aeruginos, and Candida albicans. UV-Vis spectroscopy of the prepared sumac-mediated silver solution showed the absorption maximum at about 400 nm. According to the TEM results obtained, it was observed that the particles were spherical, approximately 4 nm in size, and showed a homogeneous distribution. The sizes of nanoparticles formed by XRD pattern were supported and silver nanoparticles were obtained. According to the obtained XRD results, the crystal nature of nanoparticles in face-centered cubic structure was confirmed by the peaks in the XRD model corresponding to the planes (111) (200) (220) and (311). It was observed that the synthesized AgNPs provided a strong protection against plasmid DNA damage. It was determined that the inhibition zone diameters of biosynthesized nanoparticles measured in terms of antibacterial activity were between 10 and 14 mm. As a result, the study revealed significant antibacterial activity of the synthesized AgNPs due to extensive membrane damage.

Antibacterial and plant growth-promoting properties of novel Fe3O4/Cu/CuO magnetic nanoparticles

In this work, an Fe₃O₄/Cu/CuO (FC) antibacterial nano-agent was synthesized in a “one-pot” approach using copper sulfate and ferric chloride as raw materials, and it was studied using TEM, XRD, XPS, UV-vis, and VSM methods. The antibacterial activity and mechanism of FC were studied, using a commercially available Bordeaux mixture as a control. The effects of an FC on mung bean development and its toxicity to human mammary epithelial cells were also investigated. The results revealed that FC could break the cell walls of E. coli and S. aureus, quadrupling the antibacterial activity of the Bordeaux combination. Furthermore, it was shown that FC might improve the germination, root development, and chlorophyll content of mung bean seeds while being 1/8 as hazardous to human mammary epithelial cells as the Bordeaux combination. The as-prepared FC can replace the Bordeaux combination in the management of agroforestry pathogens.

In this work, an Fe₃O₄/Cu/CuO (FC) antibacterial nano-agent was synthesized in a “one-pot” approach using copper sulfate and ferric chloride as raw materials, and it was studied using TEM, XRD, XPS, UV-vis, and VSM methods.

Development of electrochemical aptasensors detecting phosphate ions on TMB substrate with epoxy-based mesoporous silica nanoparticles

This study, it is aimed to develop an electrochemical aptasensor that can detect phosphate ions using 3.3'5.5' tetramethylbenzidine (TMB). It is based on the principle of converting the binding affinity of the target molecule phosphate ion (PO₄^3-) into an electrochemical signal with specific aptamer sequences for the aptasensor to be developed. The aptamer structure served as a gate for the TMB to be released and was used to trap the TMB molecule in mesoporous silica nanoparticles (MSNPs). The samples for this study were characterized by transmission electron spectroscopy (TEM), Brunner-Emmet-Teller, dynamic light scattering&electrophoretic light scattering, and induction coupled plasma atomic emission spectroscopy. According to TEM analysis, MSNPs have a morphologically hexagonal structure and an average size of 208 nm. In this study, palladium-carbon nanoparticles (Pd/C NPs) with catalytic reaction were used as an alternative to the biologically used horseradish peroxidase (HRP) enzyme for the release of TMB in the presence of phosphate ions. The limit of detection (LOD) was calculated as 0.983 μM, the limit of determination (LOQ) was calculated as 3.276 μM, and the dynamic linear phosphate range was found to be 50-1000 μM. The most important advantage of this bio-based aptasensor assembly is that it does not contain molecules such as a protein that cannot be stored for a long time at room temperature, so its shelf life is very long compared to similar systems developed with antibodies. The proposed sensor shows good recovery in phosphate ion detection and is considered to have great potential among electrochemical sensors.