Graphitic carbon nitride metal-free photocatalyst for the simultaneous removal of emerging pharmaceutical pollutants in wastewater

An approach for the treatment of chlorpyrifos and atrazine pesticides using graphitic carbon nitride photocatalyst

This study evaluated an effective approach for the removal of chlorpyrifos (Chp) and atrazine (Atz) pesticides using graphitic carbon nitride photocatalyst (g-CN). Experimental results showed that under solar light, g-CN was able to remove 82.4% of Chp and 73.6% of Atz at an initial concentration of 10 mg L-1. It also exhibited that the total organic carbon removal efficiency was 95.3% for Chp and 84.7% for Atz after 150 min. Besides, the removal of Chp and Atz is more effective under solar light, with a degradation efficiency of around 10% higher than that of visible light. The characterization results confirmed the high purity of the g-CN photocatalyst and its strong UV light absorption ability, with some extension into the visible region. In addition, recent methods used for the removal of Chp and Atz were discussed and evaluated. It showed that the photocatalytic process is the most widely used method for removing Chp and Atz compared to other techniques. However, the development of suitable photocatalytic materials based on g-CN should be further explored to enhance their efficiency under visible light.

Effective approach for removing antibiotic residues from wastewater using Bi2O3@C3N4 photocatalyst

This study explores the photocatalytic decomposition of antibiotic residues, including tetracycline (TCR) and amoxicillin (AMR), from wastewater using Bi2O3@C3N4 photocatalyst. The characterization findings revealed that Bi2O3@C3N4 exhibited significantly improved light absorption properties and enhanced charge separation efficiency. According to the experimental results, Bi2O3@C3N4 exhibited high degradation efficiencies of 77.6% for TCR and 83.2% for AMR in wastewater samples. It also displayed excellent reusability, with the removal efficiencies of TCR and AMR remaining at 71.3 and 78.8%, respectively, after five cycles. Additionally, the photodegradation of TCR and AMR using Bi2O3@C3N4 is suggested to follow the Z-scheme pathway. The results of this study could be utilized for removing antibiotic pollutants from wastewater, thereby reducing their impact on human health and the environment.

Origin, types, and contribution of emerging pollutants to environmental degradation and their remediation by physical and chemical techniques

The growing presence of emerging pollutants (EPs) in aquatic environments, as well as their harmful impacts on the biosphere and humans, has become a global concern. Recent developments and advancements in pharmaceuticals, agricultural practices, industrial activities, and human personal care substances have paved the way for drastic changes in EP concentrations and impacts on the ecosystem. As a result, it is critical to mitigate EP's harmful effects before they jeopardize the ecological equilibrium of the overall ecosystem and the sustainable existence of life on Earth. This review comprehensively documented the types, origins, and remediation strategies of EPs, and underscored the significance of this study in the current context. We briefly stated the major classification of EPs based on their organic and inorganic nature. Furthermore, this review systematically evaluates the occurrence of EPs due to the fast-changing ecological scenarios and their impact on human health. Recent studies have critically discussed the emerging physical and chemical processes for EP removal, highlighting the limitations of conventional remediation technologies. We reviewed and presented the challenges associated with EP remediation and degradation using several methods, including physical and chemical methods, with the application of recent technologies. The EP types and various methods discussed in this review help the researchers understand the nature of present-day EPs and utilize an efficient method of choice for EP removal and management in the future for sustainable life and development activities on the planet.

Recent advances and future trends in metal oxide photocatalysts for removal of pharmaceutical pollutants from wastewater: a comprehensive review

The rapid and widespread increase in pharmaceutical micropollutants (PMPs) poses a significant and immediate threat to ecosystems and human health globally. With the demand for clean water becoming increasingly critical, particularly amid escalating global water scarcity challenges, there is an urgent need for innovative approaches. Among the potential solutions, metal oxide photocatalysts such as titanium dioxide-based (TiB) and zinc oxide-based (ZnB) have garnered attention due to their cost-effectiveness, efficient photodegradation capabilities, and inherent stability. This comprehensive review explores recent advancements in the application of TiB and ZnB for the removal of PMPs from wastewater. It examines the multifaceted impacts of PMPs on environmental and public health, evaluates various techniques for their removal, and assesses design strategies aimed at maximizing the photocatalytic efficiency of TiB and ZnB. The mechanisms responsible for the photocatalytic degradation of pharmaceutical micropollutants using TiB and ZnB photocatalysts are comprehensively detailed. Finally, the review outlines the prospects and challenges associated with the use of TiB and ZnB photocatalysts for the removal of PMPs from wastewater. It emphasizes their potential to effectively mitigate PMP contaminants and make substantial contributions to sustainable water management practices in the face of escalating environmental and public health concerns.

Removal of bisphenol a micropollutants released from plastic waste using Pt-ZnO photocatalyst

Plastic pollution is becoming increasingly severe and is attracting global attention. One of its consequences is the recent discovery of micropollutant discharge into water, with Bisphenol A (BA-MP) being a typical example. This study utilizes an advanced oxidation process based on Pt-doped ZnO photocatalyst to remove BA-MP. Health concerns related to the release of BA-MP from plastic waste are discussed. Besides, the results of the photodegradation experiment show that the Pt-ZnO photocatalyst can remove 94.1% of BA-MP within 60 min when exposed to solar light. Moreover, after five reuse cycles, Pt-ZnO retains a high BA-MP removal efficiency of 71.2%, and its structure remains largely unchanged compared to the original material. The removal efficiency of BA-MP leaching from plastic waste was measured at 98.8%, confirming the suitability of Pt-ZnO for the treatment of micropollutants. Furthermore, this study also highlights the prospects and challenges of using Pt-ZnO for the treatment of micropollutants discharged from plastic waste.

Oxidation of antibiotic micropollutants in various water resources through integration of Bi2WO6 and g-C3N4

Recently, the hazardous effects of antibiotic micropollutants on the environment and human health have become a major concern. To address this challenge, semiconductor-based photocatalysis has emerged as a promising solution for environmental remediation. Our study has developed Bi2WO6/g-C3N4 (BWCN) photocatalyst with unique characteristics such as reactive surface sites, enhanced charge transfer efficiency, and accelerated separation of photogenerated electron-hole pairs. BWCN was utilized for the oxidation of tetracycline antibiotic (TCA) in different water sources. It displayed remarkable TCA removal efficiencies in the following order: surface water (99.8%) > sewage water (88.2%) > hospital water (80.7%). Further, reusability tests demonstrated sustained performance of BWCN after three cycles with removal efficiencies of 87.3, 71.2 and 65.9% in surface water, sewage, and hospital water, respectively. A proposed photocatalytic mechanism was delineated, focusing on the interaction between reactive radicals and TCA molecules. Besides, the transformation products generated during the photodegradation of TCA were determined, along with the discussion on the potential risk assessment of antibiotic pollutants. This study introduces an approach for utilizing BWCN photocatalyst, with promising applications in the treatment of TCA from various wastewater sources.

Exploring the potential of CoMoO4-modified graphitic carbon nitride to boost oxidation of amoxicillin micropollutants in hospital wastewater

This study investigates the removal of amoxicillin micropollutants (AM) from hospital wastewater using CoMoO4-modified graphitic carbon nitride (CMO/gCN). Consequently, CMO/gCN exhibits notable improvements in visible light absorption and electron-hole separation rates compared to unmodified gCN. Besides, CMO/gCN significantly enhances the removal efficiency of AM, attaining an impressive 96.5%, far surpassing the performance of gCN at 48.6%. Moreover, CMO/gCN showcases outstanding reusability, with AM degradation performance exceeding 70% even after undergoing six cycles of reuse. The removal mechanism of AM employing CMO/gCN involves various photoreactions of radicals (•OH, •O2-) and amoxicillin molecules under light assistance. Furthermore, CMO/gCN demonstrates a noteworthy photodegradation efficiency of AM from hospital wastewater, reaching 92.8%, with a near-complete reduction in total organic carbon levels. Detailed discussions on the practical applications of the CMO/gCN photocatalyst for removal of micropollutants from hospital wastewater are provided. These findings underline the considerable potential of CMO/gCN for effectively removing various pollutants in environmental remediation strategies.

Enhanced removal of pesticide micropollutant and bacteria using solar light-assisted Ag-doped TiO2: prospects for environmental and health impacts

Pesticide micropollutants like 4-chlorophenol (4CP) and E. coli bacteria represent a substantial hazard, impacting both the environment and human health. This study delves into the effectiveness of Ag-doped TiO2 (Ag@TiO2) in removing both 4CP and E. coli. Ag@TiO2 has demonstrated remarkable effectiveness in removing 4CP under both solar and visible light conditions, earning degradation efficiencies of 91.3% and 72.8%, respectively. Additionally, it demonstrates outstanding photodegradation efficiency for 4CP (98.8%) at an initial concentration of 1 mg L-1. Moreover, Ag@TiO2 exhibited substantially higher removal performance for 4CP (81.6%) compared to TiO2 (27.6%) in wastewater. Analysis of the radicals present during the photodegradation process revealed that ·O2- primarily drives the decomposition of 4CP, with h+ and ·OH also playing significant roles in the oxidation reactions of the pollutant. Interestingly, even under dark conditions, Ag@TiO2 exhibited the capability to eliminate approximately 20% of E. coli, a percentage that increased to over 96% under solar light. In addition, the prospects for environmental and health impacts of utilizing Ag@TiO2 for pesticide micropollutant removal and bacteria were discussed.

Valorization of the treatment of antibiotic and organic contents generated from an in-situ-RAS-like shrimp farming pond by using graphene-quantum-dots deposited graphitic carbon nitride photocatalysts

In this study, we investigated the possibility of a photocatalytic system that uses graphene-quantum-dot (GQD)-deposited graphitic carbon nitride (g-C3N4) to treat tetracycline (TC) and other organic compounds generated from an in-situ-recirculatory-aquaculture-system (RAS)-like shrimp farming pond. GQDs were successfully deposited on the exfoliated g-C3N4 base through a hydrothermal treatment. The results showed that the incorporation of GQDs into the g-C3N4 enhanced its porosity without aggregating its mesoporous structure. The GQDs-deposited g-C3N4 photocatalysts revealed sheet-like structures with nanopores on their surface that facilitate photocatalysis. More than 90% of the TC was removed by the photocatalysts under UV-LED irradiation. Low loadings of GQDs over g-C3N4 resulted in a faster and more effective photocatalysis of TC, mainly driven by.O2- radicals. The photocatalysts were also applicable in the degradation of organic compounds with 27% of the total organic compounds (TOC) being removed from the wastewater of a RAS-like shrimp farming pond.

Improved photocatalytic oxidation of micropollutant in wastewater by solar light: assisted palladium-doped graphitic carbon nitride

The escalating global industrial expansion has led to the extensive release of organic compounds into water bodies, resulting in substantial pollution and posing severe threats to both human health and the ecosystem. Among common micropollutants, bisphenol A (MP-BA) has emerged as a significant endocrine-disrupting chemical with potential adverse effects on human health and the environment. This study aims to develop an efficient photocatalyst, specifically by incorporating palladium-doped graphitic carbon nitride (Pd@GCN), to eliminate MP-BA pollutants present in industrial wastewater. The examination of optical properties and photoluminescence indicates that incorporating Pd into GCN enhances the visible light absorption spectra, which extends beyond 570 nm, and accelerates the separation rate of electron-hole pairs. The photocatalytic degradation efficiency of MP-BA increases from 81.7 to 98.8% as the solution pH rises from 5.0 to 9.0. Moreover, Pd@GCN significantly improves the removal rate of MP-BA in wastewater samples, reaching an impressive 92.8% after 60 min of exposure to solar light. Furthermore, the Pd@GCN photocatalyst exhibits notable reusability over six cycles of MP-BA degradation, indicating its promising potential for the treatment of organic pollutants in wastewater under solar light conditions.

Decoration of viscose fibers with silver nanoparticle-based titanium-organic framework for use in environmental applications

To effectively remove pharmaceuticals, nitroaromatic compounds, and dyes from wastewater, an efficient multifunctional material was created based on silver nanoparticles (Ag) and MIL-125-NH2 (MOF) immobilized on viscose fibers (VF) as a support substrate. Firstly, silver nanoparticles (Ag) were immobilized on the surface of viscose fibers (VF) via in situ synthesis using trisodium citrate (TSC) as a reducing agent to create (VF-Ag). Then, VF and VF-Ag were decorated with the titanium metal-organic framework MIL-125-NH2 (MOF) to create VF-MOF and VF-Ag-MOF. The influence of VF-Ag, VF-MOF, and VF-Ag-MOF on the sonocatalytic or sonophotocatalytic degradation of sulfa drugs was investigated. The results show that VF-Ag-MOF showed excellent sonocatalytic and sonophotocatalytic activity towards the degradation of sulfa drugs compared to VF-Ag and VF-MOF. Furthermore, sonophotodegradation showed a dramatic enhancement in the efficiency of degradation of sulfa drugs compared to sonodegradation. The sonophotodegradation degradation percentage of sulfanilamide, sulfadiazine, and sulfamethazine drugs in the presence of VF-Ag-MOF was 65, 90, and 95 after 45 min of ultrasonic and visible light irradiation. The catalytic activity of VF-Ag, VF-MOF, and VF-Ag-MOF was evaluated through the conversion of p-nitrophenol (4-NP) to p-aminophenol (4-AP). The results demonstrate that VF-Ag-MOF had the highest catalytic activity, followed by VF-Ag and VF-MOF. The conversion percentage of 4-NP to 4-AP was 69%. The catalytic or photocatalytic effects of VF-Ag, VF-MOF, and VF-Ag-MOF on the elimination of methylene blue (MB) dye were investigated. The results demonstrate that VF-Ag-MOF showed high efficiency in removing the MB dye through the reduction (65%) or photodegradation (71%) after 60 min. VF-Ag-MOF composites structure-activity relationships represent that doping within silver NPs enhanced the photocatalytic activity of MIL-125-NH2, which could be explained as follows: (i) Due to the formation of a Schottky barrier at the junction between MIL-125-NH2 and Ag NPs, the photogenerated electrons in the conduction band of MIL-125-NH2 were supposed to be quickly transferred to the valence band of the Ag NPs, and subsequently, the electrons were transferred to the conduction band of Ag NPs. This considerable electron transferring process, which is reported as Z scheme heterojunction, can efficiently suppress the recombination of electron/hole pairs in VF-Ag-MIL-125-NH2 composites. (ii) Sufficient separation between the photogenerated charge carriers (holes and electrons) and avoiding their recombination enhanced the photocatalytic activity of composites.

Enhanced generation of oxysulfur radicals by the BiOBr/Montmorillonite activated sulfite system: Performance and mechanism

The easily synthesized, cost-effective, and stable photocatalysts for sulfite activation are always required for the enhancement of organic contaminants degradation. Herein, the facile coprecipitation synthesis of Bismuth oxybromide (BiOBr)/Montmorillonite (MMT) was reported, which could activate sulfite (SO32-/HSO3-) under sunlight and accelerate the catalytic performance more effectively than pristine BiOBr. After adding sulfite to the photocatalysis system, the photodegradation efficiency of atrazine (ATZ) achieved 73.7% ± 1.5% after 5 min and 94.4% ± 1.6% after 30 min of sunlight irradiation with BiOBr/MMT. The BiOBr/MMT-sulfite system also presented remarkable photocatalytic performance to eliminate various contaminants, including ciprofloxacin, sulfadiazine, tetracycline, and carbamazepine. The various features of the photocatalyst materials were studied, including their surface morphology, structure, optical properties, and composition. The results illustrated that by adding MMT, the bandgap of the pristine BiOBr was reduced and the surface area was increased, which led to an increased ability to adsorb materials. Results of various influence factors showed this enhanced system had satisfactory and stable removal performance of ATZ in the pH range of 3.0-6.5, but HPO42- had a strong negative effect on the system performance. Oxysulfur radicals (SO5·- and SO4·-), h+, and 1O2 were discovered as the prevailing active species in the BiOBr/MMT-sulfite system. The proposed degradation mechanism of this photocatalyst-enhanced system revealed that sulfite adsorption on the surface of the photocatalyst played a vital role during the initial phase, and the degradation pathway of ATZ was discussed. This study provides a new synthesis strategy of a photocatalyst for sulfite activation and expands the potential uses of Bi-based photocatalysts in degrading difficult-to-remove organic pollutants.