Carbamazepine degradation by visible-light-driven photocatalyst Ag3PO4/GO: Mechanism and pathway

In situ single iron atom doping on Bi2WO6 monolayers triggers efficient photo-fenton reaction

Developing an efficient photocatalytic system for hydrogen peroxide (H2O2) activation in Fenton-like processes holds significant promise for advancing water purification technologies. However, challenges such as high carrier recombination rates, limited active sites, and suboptimal H2O2 activation efficiency impede optimal performance. Here we show that single-iron-atom dispersed Bi2WO6 monolayers (SIAD-BWOM), designed through a facile hydrothermal approach, can offer abundant active sites for H2O2 activation. The SIAD-BWOM catalyst demonstrates superior photo-Fenton degradation capabilities, particularly for the persistent pesticide dinotefuran (DNF), showcasing its potential in addressing recalcitrant organic pollutants. We reveal that the incorporation of iron atoms in place of tungsten within the electron-rich [WO4]2- layers significantly facilitates electron transfer processes and boosts the Fe(II)/Fe(III) cycle efficiency. Complementary experimental investigations and theoretical analyses further elucidate how the atomically dispersed iron induces lattice strain in the Bi2WO6 monolayer, thereby modulating the d-band center of iron to improve H2O2 adsorption and activation. Our research provides a practical framework for developing advanced photo-Fenton catalysts, which can be used to treat emerging and refractory organic pollutants more effectively.

Bio-electrochemical degradation of carbamazepine (CBZ): A comprehensive study on effectiveness, degradation pathway, and toxicological assessment

Recent attention on the detrimental effects of pharmaceutically active compounds (PhACs) in natural water has spurred researchers to develop advanced wastewater treatment methods. Carbamazepine (CBZ), a widely recognized anticonvulsant, has often been a primary focus in numerous studies due to its prevalence and resistance to breaking down. This study aims to explore the effectiveness of a bio-electrochemical system in breaking down CBZ in polluted water and to assess the potential harmful effects of the treated wastewater. The results revealed bio-electro degradation process demonstrated a collaborative effect, achieving the highest CBZ degradation compared to electrodegradation and biodegradation techniques. Notably, a maximum CBZ degradation efficiency of 92.01% was attained using the bio-electrochemical system under specific conditions: Initial CBZ concentration of 60 mg/L, pH level at 7, 0.5% (v/v) inoculum dose, and an applied potential of 10 mV. The degradation pathway established by identifying intermediate products via High-Performance Liquid Chromatography-Mass Spectrometry, revealed the complete breakdown of CBZ without any toxic intermediates or end products. This finding was further validated through in vitro and in vivo toxicity assays, confirming the absence of harmful remnants after the degradation process.

Development of a novel LED-IoT photoreactor for enhanced removal of carbamazepine waste driven by solar energy

This study introduces an innovative LED-IoT photoreactor, representing a significant advancement in response to the demand for sustainable water purification. The integration of LED-IoT installations addresses the challenge of intermittent sunlight availability, employing LEDs with a spectrum mimicking natural sunlight. Passive Infra-Red (PIR) sensors and Internet of things (IoT) technology ensure consistent radiation intensity, with the LED deactivating in ample sunlight and activating in its absence. Utilizing a visible light-absorbing photocatalyst developed through sol-gel synthesis and mild-temperature calcination, this research demonstrates a remarkable carbamazepine removal efficiency exceeding 95% under LED-IoT system illumination, compared to less than 90% efficiency with sunlight alone, within a 6-h exposure period. Moreover, the designed photocatalytic system achieves over 60% mineralization of carbamazepine after 12 h. Notably, the photocatalyst demonstrated excellent stability with no performance loss during five further cycles. Furthermore, integration with renewable energy sources facilitated continuous operation beyond daylight hours, enhancing the system's applicability in real-world water treatment scenarios. A notable application of the LED-IoT system at an operating sewage treatment plant showed nearly 80% efficiency in carbamazepine removal from sewage in the secondary settling tank after 6 h of irradiation, coupled with nearly 40% mineralization efficiency. Additionally, physicochemical analyses such as XPS and STA-FTIR confirm that the carbamazepine photooxidation process does not affect the surface of the photocatalyst, showing no adsorption for degradation products.

Genomic, Phylogenetic and Physiological Characterization of the PAH-Degrading Strain Gordonia polyisoprenivorans 135

The strain Gordonia polyisoprenivorans 135 is able to utilize a wide range of aromatic compounds. The aim of this work was to study the features of genetic organization and biotechnological potential of the strain G. polyisoprenivorans 135 as a degrader of aromatic compounds. The study of the genome of the strain 135 and the pangenome of the G. polyisoprenivorans species revealed that some genes, presumably involved in PAH catabolism, are atypical for Gordonia and belong to the pangenome of Actinobacteria. Analyzing the intergenic regions of strain 135 alongside the "panIGRome" of G. polyisoprenivorans showed that some intergenic regions in strain 135 also differ from those located between the same pairs of genes in related strains. The strain G. polyisoprenivorans 135 in our work utilized naphthalene (degradation degree 39.43%) and grew actively on salicylate. At present, this is the only known strain of G. polyisoprenivorans with experimentally confirmed ability to utilize these compounds.

An insight into the role of experimental parameters in advanced oxidation process applied for pharmaceutical degradation

The advanced oxidation process (AOP) is an efficient method to treat recalcitrance pollutants such as pharmaceutical compounds. The essential physicochemical factors in AOP experiments significantly influence the efficiency, speed, cost, and safety of byproducts of the treatment process. In this review, we collected recent articles that investigated the elimination of pharmaceutical compounds by various AOP systems in a water medium, and then we provide an overview of AOP systems, the formation mechanisms of active radicals or reactive oxygen species (ROS), and their detection methods. Then, we discussed the role of the main physicochemical parameters (pH, chemical interference, temperature, catalyst, pollutant concentration, and oxidant concentration) in a critical way. We gained insight into the most frequent scenarios for the proper and improper physicochemical parameters for the degradation of pharmaceutical compounds. Also, we mentioned the main factors that restrict the application of AOP systems in a commercial way. We demonstrated that a proper adjustment of AOP experimental parameters resulted in promoting the treatment performance, decreasing the treatment cost and the treatment operation time, increasing the safeness of the system products, and improving the reaction stoichiometric efficiency. The outcomes of this review will be beneficial for future AOP applicants to improve the pharmaceutical compound treatment by providing a deeper understanding of the role of the parameters. In addition, the proper application of physicochemical parameters in AOP systems acts to track the sustainable development goals (SDGs).

Unraveling the impact of microwave-assisted techniques in the fabrication of yttrium-doped TiO2 photocatalyst

In this study, we investigate the role of microwave technology in the fabrication of yttrium-doped TiO2 through a comparative analysis of hydrothermal techniques. Microwave-assisted hydrothermal synthesis offers advantages, but a comprehensive comparison between microwave-assisted and conventional methods is lacking. Therefore, in our investigation, we systematically evaluate and compare the morphological, structural, and optical properties of yttrium-doped TiO2 samples synthesized using both techniques. The X-ray diffraction (XRD) patterns confirm the anatase tetragonal structure of the synthesized TiO2-Y systems, while the larger ion radius of yttrium (Y3+) compared to titanium (Ti4+) presents challenges for yttrium to incorporate into the TiO2 lattice. The X-ray Photoelectron Spectroscopy (XPS) revealed a significant difference in the atomic content of yttrium between the TiO2-Y systems synthesized using microwave-assisted and conventional methods. This finding suggests that the rapid microwave method is more effective in successfully doping TiO2 with rare earth metals such as yttrium. The photo-oxidation of carbamazepine (CBZ) using TiO2-Y systems demonstrated high efficiency under UV-LED light. Microwave-synthesized TiO2-Y demonstrates improved photo-oxidation efficiency of CBZ, attributed to enhanced absorption, charge transfer, surface area, and crystallite size. Overall, the microwave-synthesized TiO2-Y systems showed promising performance for the photo-oxidation of CBZ, with improved efficiency compared to conventional synthesis methods.

Experimental and theoretical revealing of piezo-photocatalyst Bi2O2CO3 for degradation of ciprofloxacin in water

In this report, we have attempted to experimentally and theoretically reveal a new piezo-photocatalyst Bi2O2CO3 for efficient removal of ciprofloxacin (CIP) from water. Bi2O2CO3 nanoplates were synthesized to evaluate their photocatalytic (irradiation source: simulated-sunlight), piezocatalytic (irradiation source: ultrasonic) and piezo-photocatalytic (irradiation source: simulated-sunlight and ultrasonic) performances for CIP elimination. Under the condition CCIP = 10 mg/L and Ccatalyst = 1 g/L, the piezo-photodegradation rate constant is obtained as kapp = 0.07811 min-1, which surpasses that of photocatalysis (kapp = 0.04686 min-1) and piezocatalysis (kapp = 0.01233 min-1); this phenomenon manifests an obvious piezo-enhanced photocatalytic behavior in terms of the "1 + 1 > 2" principle. The ultrasonic-induced piezoelectric behavior in Bi2O2CO3 nanoplates and involved piezo-photocatalytic mechanism were theoretically elucidated by density functional theory (DFT) and finite-element method (FEM) studies. Additionally, the effects of various factors on the CIP degradation, decomposition mechanism of CIP and toxicity of the decomposition intermediates were also analyzed.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

Photocatalytic synergistic biofilms enhance tetracycline degradation and conversion

Tetracyclines are refractory pollutants that cause persistent harm to the environment and human health. Therefore, it is urgently necessary to develop methods to promote the efficient degradation and conversion of tetracyclines in wastewater. This report proposes a photobiocatalytic synergistic system involving the coupling of GeO₂/Zn-doped phosphotungstic acid hydrate/TiO₂ (GeO₂/Zn-HPW/TiO₂)-loaded photocatalytic optical hollow fibers (POHFs) and an algal-bacterial biofilm. The GeO₂/Zn-HPW/TiO₂ photocatalyst exhibits a broad absorption edge extending to 1000 nm, as well as high-efficiency photoelectric conversion and electron transfer, which allow the GeO₂/Zn-HPW/TiO₂-coated POHFs to provide high light intensity to promote biofilm growth. The resulting high photocatalytic activity rapidly and stably reduces the toxicity and increases the biodegradability of tetracycline-containing wastewater. The biofilm enriched with Salinarimonas, Coelastrella sp., and Rhizobium, maintains its activity for the rapid photocatalytic degradation and biotransformation of intermediates to generate the O₂ required for photocatalysis. Overall, the synergistic photocatalytic biofilm system developed herein provides an effective and efficient approach for the rapid degradation and conversion of water containing high concentrations of tetracycline.

Supported photocatalyst for Cr (VI) conversion and removal of organic pollutants

The photocatalytic property of available semiconductor catalysts still suffers from some urgent problems, such as the high excitation energy, easy agglomeration of powders, or weak recycling property. Therefore, developing novel visible light-supported catalysts and catalyst loading have aroused great attention recently. In this work, a novel Ag₃PO₄/BiVO₄/MWCNTs@Cotton functional fabric was prepared by introducing Ag₃PO₄ as a plasma resonance photocatalyst and MWCNTs with cotton as composite substrates. Not only did the introduction of Ag₃PO₄ and MWCNTs effectively strengthen the application ability of BiVO₄, but also inhibited the recombination of carriers, and promoted the transport of carriers according to spectroscopic and electrochemical tests. Degradation tests remained that Ag₃PO₄/BiVO₄/MWCNTs @cotton retained the high photocatalytic efficiency of the powder catalyst, along with the degradation degree of active blue KN-R (50mg/L) as well as Cr (VI) (20mg/L) could reach more than 90% within 120 min. What's more, the functional fabric has gained excellent performance in degrading pollutants for 5 cycles. Meanwhile, the prepared BiVO₄ is consistent with the band structure and electron density calculated theoretically by the GGA-PBE function. Free radical trapping and scavenging experiments exhibited that functional fabrics could produce active substances such as h⁺,·O₂^-, and·OH, among which the first two are the main active substances in the reaction. To sum up, this study is an effective attempt based on the existing problems of photocatalysts together with providing some study directions for the development of photocatalytic technology in the future.

ABNO-Functionalized Silica as an Efficient Catalyst for Enhancing Permanganate Oxidation of Emerging Contaminants

Recent reports indicate that some soluble electron-shuttling compounds (or organic mediators) can accelerate reactions between permanganate (Mn(VII)) and contaminants of emerging concern. However, practical application is limited to homogeneous electron-shuttling compounds. This study reports on the development and application of a heterogeneous electron-shuttling catalyst for Mn(VII) reactions with bisphenol A (BPA). First, we screened a series of poly/monocyclic nitroxides, finding that 9-azabicyclo[3.3.1]nonane N-oxyl (ABNO) provides the most significant enhancement of Mn(VII)/BPA reaction kinetics, where Mn(VII) oxidizes ABNO to BPA-reactive ABNO⁺. Next, we immobilized ABNO onto silica (SiO₂) by covalent bonding of 9-azabicyclo[3,3,1]nonan-3-one-9-oxyl (keto-ABNO) via a 3-aminopropyltriethoxysilane bridge to yield an ABNO@SiO₂ heterogeneous catalyst. The performance of ABNO@SiO₂ in catalyzing Mn(VII)/BPA reactions is demonstrated, with BPA reaction kinetics being highly dependent on catalyst dosage and pH conditions. The stability of ABNO@SiO₂ was retained at pH 5.0 and decreased slightly at pH 7.0 over five successive Mn(VII)/BPA reaction cycles. Kinetics modeling shows that BPA reacts with immobilized ABNO⁺, Mn(VII), and in situ formed MnO₂. Moreover, ABNO⁺ can form via ABNO reactions with both Mn(VII) and the in situ formed MnO₂. These results indicate a promising strategy for developing practical heterogeneous catalysts for enhancing Mn(VII) reactivity and treatment applications.

Integrated Electro-Ozonation and Fixed-Bed Column for the Simultaneous Removal of Emerging Contaminants and Heavy Metals from Aqueous Solutions

In the current study, an integrated physiochemical method was utilized to remove tonalide (TND) and dimethyl phthalate (DMP) (as emerging contaminants, ECs), and nickel (Ni) and lead (Pb) (as heavy metals), from synthetic wastewater. In the first step of the study, pH, current (mA/cm2), and voltage (V) were set to 7.0, 30, and 9, respectively; then the removal of TND, DMP, Ni, and Pb with an electro-ozonation reactor was optimized using response surface methodology (RSM). At the optimum reaction time (58.1 min), ozone dosage (9.4 mg L−1), initial concentration of ECs (0.98 mg L−1), and initial concentration of heavy metals (28.9 mg L−1), the percentages of TND, DMP, Ni, and Pb removal were 77.0%, 84.5%, 59.2%, and 58.2%, respectively. For the electro-ozonation reactor, the ozone consumption (OC) ranged from 1.1 kg to 3.9 kg (kg O3/kg Ecs), and the specific energy consumption (SEC) was 6.95 (kWh kg−1). After treatment with the optimum electro-ozonation parameters, the synthetic wastewater was transferred to a fixed-bed column, which was filled with a new composite adsorbent (named BBCEC), as the second step of the study. BBCEC improved the efficacy of the removal of TND, DMP, Ni, and Pb to more than 92%.

Manganese oxide OMS-2 loaded on activated carbon fiber: a novel catalyst-assisted UV/PMS process for carbamazepine treatment in water

A novel catalyst was prepared by loading OMS-2 onto activated carbon fiber (ACF) via a one-step hydrothermal method, which was further adopted for carbamazepine treatment.