The toxicology of indium oxide

State-of-the-art Investigation on the Role of Indium, Terbium, Yttrium, and Lanthanum in Recurrent Pregnancy Loss

We aimed to explore the role of Indium (In), Terbium (Tb), Yttrium (Y), and Lanthanum (La) in the serum of women with recurrent pregnancy loss (RPL) and compare them to controls. Additionally, the study aimed to examine the relationship between REE levels and oxidative DNA damage, to identify potential risk factors contributing to RPL. This case-control study included 30 RPL cases and 30 controls with uncomplicated pregnancy. Inductively Coupled Plasma Mass Spectrometer was used to evaluate levels of In, Tb, Y, and La in the serum samples in both groups. The relationship between REE levels, Total Antioxidant Capacity (TAC), and DNA damage was studied by correlation analysis. There was a significant increase in levels of In, Tb, Y, and La in the serum of the RPL group in contrast to the control group (P < 0.001). Furthermore, a negative correlation was observed between increased Y, Tb, La, and TAC in RPL cases (significant at P < 0.05), indicative of weakened antioxidant defenses. Moreover, increased levels of Y, Tb, and La exhibited a positive correlation with the DNA damage marker, statistically significant at P < 0.05. These findings highlight the potential role of oxidative stress-induced DNA damage and metal intoxication in the development of RPL, underscoring the importance of further research to clarify underlying mechanisms and develop preventive strategies.

Ethyl 3-aminobenzo[b]thiophene-2-carboxylate Derived Ratiometric Schiff Base Fluorescent Sensor for the Recognition of In3+ and Pb2

An ethyl 3-aminobenzo[b]thiophene-2-carboxylate derived ratiometric Schiff base fluorescent sensor R was devised and synthesized. R exhibited a highly sensitive and selective ratiometric response to In3+ in DMF/H2O tris buffer solution. R exhibited a colorimetric/fluorescent dual-channel response to In3+. More importantly, R can distinguish In3+ from Ga3+ and Al3+ in less than 5 min. R exhibited a good linear correlation with the concentration of In3+ in the 5-25 μM range and the limit of detection for In3+ was found to be 8.36 × 10-9 M. According to the job`s plot and MS spectra, R formed a complex with In3+ at 1:2 with a complexation constant of 8.24 × 109 M2. Based on Gaussian theory calculations, the response mechanism of R to In3+ can be explained by photo-induced electron transfer (PET) and intramolecular charge transfer (ICT) mechanisms. In addition, R can be used for the detection of indium in tap water with satisfactory recoveries. Meanwhile, R displayed a linear relationship to micromolar concentrations (0-50 μM) of Pb2+ and recognized Pb2+ in a ratiometric response with a detection limit of 8.3 × 10-9 M.

Release of indium from In2O3 nanoparticles in model solutions and synthetic seawater

Indium oxide (In2O3) nanoparticles (NPs) are used in electronic devices, from which indium (as its nanoparticulate form or as other generated chemical species) can be released to natural waters. To assess for the impacts of such releases (e.g. toxic effects), information on the kinetics and thermodynamics of the In2O3 dissolution processes is key. In this work, the evolution with time of the dissolution process was followed with the technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) by measuring the free indium concentration ([In3+]). AGNES can determine the free ion concentration in the presence of nanoparticles without a prior separation step, as shown in the case of ZnO nanoparticles, a procedure that is more accurate than the typical sequence of centrifugation+filtration+elemental analysis. Excess of indium oxide NPs were dispersed in 0.1 mol L-1 KNO3 at various pH values ranging from 2 to 8. Additional dispersions with bulk In2O3 at pH 3 or NPs in synthetic seawater at pH 8 were also prepared. The temperature was carefully fixed at 25 °C. The dispersions were continuously stirred and samples were taken from time to time to measure free indium concentration with AGNES. 180-day contact of In2O3 to solutions at pH 2 and 3 was not enough to reach equilibrium. The dissolution of the NPs at pH 3 was faster than that of the bulk (i.e. non nanoparticulate) material. Equilibrium of the NPs with the solution was reached at pH 4 and 5 in KNO3 and at pH 8 in seawater, in shorter times for higher pH values, with free indium concentrations decreasing by a factor of 1000 for each increase in one pH unit. The solubility products of In(OH)3 and In2O3 were compared. Equilibration of NPs with synthetic seawater took <18 days, with an average free [In3+] (up to 196 days) of 1.03 amol L-1.

Determination of indium by adsorptive stripping voltammetry at the bismuth film electrode using combined electrode system facilitating medium exchange

A novel method of determining indium has been described in this article which uses adsorptive stripping voltammetry (AdSV) and 4-(2-pyridylazo)-resorcinol (PAR) as a chelating agent or as the preconcentration agent. The measurements were performed using square-wave voltammetry by using a combined electrode system, which allows for preconcentration and stripping without opening the circuit. Ex situ plated bismuth film electrode (BiFE) was used as the working electrode. A potential-time program was developed for the inversion cycle stages based on the various factors that affect the magnitude of the inversion signal. The calibration curve was linear in a concentration range of 2·10-7 to 4·10-6 М when the pH is 4.8, accumulation potential is -700 mV, and PAR concentration is 1·10-4 M. The detection limit for the 3σ criterion with an accumulation time of 120 s was 3.5·10-9 М. Several interferences caused by Tl(I), Zn(II), Cu(II), Pb(II), Co(II), Ni(II), Mn(II), Fe(III), Cr(III) ions have been studied, and it has been shown that medium exchange procedure can effectively eliminate some interferences. It was demonstrated that the method can be applied to the determination of indium in tap water and in ITO glass sample.

The route for commercial photoelectrochemical water splitting: a review of large-area devices and key upscaling challenges

Green-hydrogen is considered a "key player" in the energy market for the upcoming decades. Among currently available hydrogen (H2) production processes, photoelectrochemical (PEC) water splitting has one of the lowest environmental impacts. However, it still presents prohibitively high production costs compared to more mature technologies, such as steam methane reforming. Therefore, the competitiveness of PEC water splitting must rely on its environmental and functional advantages, which are strongly linked to the reactor design, to the intrinsic properties of its components, and to their successful upscaling. This review gives special attention to the engineering aspects and categorizes PEC devices into four main types, according to the configuration of electrodes and strategies for gas separation: wired back-to-back, wireless back-to-back, wired side-by-side, and wired separated electrode membrane-free. Independently of the device architecture, the use of concentrated sunlight was found to be mandatory for achieving competitive green-H2 production. Additionally, feasible strategies for upscaling the key components of PEC devices, especially photoelectrodes, are urgently needed. In a pragmatic context, the way to move forward is to accept that PEC devices will operate close to their thermodynamic limits at large-scale, which requires a solid convergence between academics and industry. Research efforts must be redirected to: (i) build and demonstrate modular devices with a low-cost and highly recyclable embodiment; (ii) optimize thermal and power management; (iii) reduce ohmic losses; (iv) enhance the chemical stability towards a thousand hours; (v) couple solar concentrators with PEC devices; (vi) boost PEC-H2 production through the use of organic compounds; and (vii) reach consensual standardized methods for evaluating PEC devices, at both environmental and techno-economic levels. If these targets are not met in the next few years, the feasibility of PEC-H2 production and its acceptance by industry and by the general public will be seriously compromised.

Operando monitoring of a room temperature nanocomposite methanol sensor

The sensing of volatile organic compounds by composites containing metal oxide semiconductors is typically explained via adsorption-desorption and surface electrochemical reactions changing the sensor's resistance. The analysis of molecular processes on chemiresistive gas sensors is often based on indirect evidence, whereas in situ or operando studies monitoring the gas/surface interactions enable a direct insight. Here we report a cross-disciplinary approach employing spectroscopy of working sensors to investigate room temperature methanol detection, contrasting well-characterized nanocomposite (TiO2@rGO-NC) and reduced-graphene oxide (rGO) sensors. Methanol interactions with the sensors were examined by (quasi) operando-DRIFTS and in situ-ATR-FTIR spectroscopy, the first paralleled by simultaneous measurements of resistance. The sensing mechanism was also studied by mass spectroscopy (MS), revealing the surface electrochemical reactions. The operando and in situ spectroscopy techniques demonstrated that the sensing mechanism on the nanocomposite relies on the combined effect of methanol reversible physisorption and irreversible chemisorption, sensor modification over time, and electron/O2 depletion-restoration due to a surface electrochemical reaction forming CO2 and H2O.

Biomonitorization of concentrations of 28 elements in serum and urine among workers exposed to indium compounds

Many studies have documented the abnormal concentrations of metals/metalloids in serum or urine of occupational workers, but no works systematically analysed the concentrations of elements in serum or urine of indium-exposed workers. This study was aimed to assess 28 elements in serum and urine from 57 individuals with occupational exposure to indium and its compounds. Control subjects were 63 workers without metal exposure. We collected information on occupation and lifestyle habits by questionnaire. Biological samples were collected to quantify elements by inductive coupled plasma-mass spectrometer. Air in the breathing zones was drawn at flow rates of 1.5-3 L/min for a sampling period of 6 to 8 h, using a Model BFC-35 pump. The average ambient indium level was 0.078 mg/m3. Serum/urine Indium levels were significantly higher in indium-exposed workers than in controls (P < 0.01). Moreover, serum/urine indium concentrations in the group with 6-14 years and ≥15 years of employment were significantly higher than those with ≤5 employment years(P < 0.05). Ten of the other 27 elements/metals measured were higher in serum/urine in indium-exposed workers compared to the controls (aluminum, beryllium, cadmium, cesium, chromium, lithium, manganese, magnesium, molybdenum and vanadium). Zinc levels in serum/urine were significantly decreased in the indium-exposed workers. Additionally, other elements/metals were higher in one specimen (serum or urine) but lower in the other (Selenium was lower in serum but higher in urine in the indium-exposed workers compared with the controls; likewise Thallium and Rubidium were higher in serum but lower in urine). Linear regression analyses, revealed significant correlations between serum and urine for indium, aluminum, arsenic, barium, cadmium, cesium, cobalt, selenium, silver, and zinc (P < 0.05). These data suggest that occupational exposure to indium and its compounds may disturb the homeostasis of trace elements in systemic circulation, indium concentrations in serum or urine appear reflective of workers' exposure to ambient indium and their years of working, respectively. The serum/urine levels of essential metals are modified by exposure to indium in occupationally exposed workers. Further studies including larger sample size and more kinds of biological sample are needed to validate our findings.

Enrichment Mechanisms of Gallium and Indium in No. 9 Coals in Anjialing Mine, Ningwu Coalfield, North China, with a Preliminary Discussion on Their Potential Health Risks

To provide a comprehensive insight into the enrichment mechanism of gallium and indium in No. 9 coals, eighteen samples were collected from Anjialing mine, Ningwu Coalfield, Shanxi Province for coal petrological, mineralogical and geochemical analyses. The results suggested that Ga and In enrichment mainly hosted in the top horizons, with average concentration coefficients of 8.99 and 2.73 respectively, compared with the rest of horizons (2.46 for Ga and 1.69 for In). Source apportionment indicated that Ga and In were mainly derived from bauxite of Benxi Formation in Yinshan Oldland, while In could originate from felsic magmatic rocks in Yinshan Oldland as well. In addition, weak oxidation condition, medium to intensive weathering, transgression and input of terrestrial higher plants had positive effects on Ga and In enrichment. With the rapid expansion of emerging electronics manufacturing, Ga and In, of which potential risks on human health were neglected previously, were recently considered as hazardous elements. Therefore, this paper also discussed the potential pathways that these elements threatened human health. We suggested that potential risks on environment and human health caused by Ga and In enrichment in coals and coal-related products should be taken into account besides their economic value.

A link between nanoparticles and Parkinson's disease. Which nanoparticles are most harmful?

Nowadays, different kinds of nanoparticles (NPs) are produced around the world and used in many fields and products. NPs can enter the body and aggregate in the various organs including brain. They can damage neurons, in particular dopaminergic neurons in the substantia nigra (SN) and striatal neurons which their lesion is associated with Parkinson's disease (PD). So, NPs can have a role in PD induction along with other agents and factors. PD is the second most common neurodegenerative disease in the world, and in patients, its symptoms progressively worsen day by day through different pathways including oxidative stress, neuroinflammation, mitochondrial dysfunction, α-synuclein increasing and aggregation, apoptosis and reduction of tyrosine hydroxylase positive cells. Unfortunately, there is no effective treatment for PD. So, prevention of this disease is very important. On the other hand, without having sufficient information about PD inducers, prevention of this disease would not be possible. Therefore, we need to have sufficient information about things we contact with them in daily life. Since, NPs are widely used in different products especially in consumer products, and they can enter to the brain easily, in this review the toxicity effects of metal and metal oxide NPs have been evaluated in molecular and cellular levels to determine potential of different kinds of NPs in development of PD.

The toxicology of gallium oxide in comparison with gallium arsenide and indium oxide

Gallium arsenide (GaAs) and indium oxide (In₂O₃) are used in electronic industries at high and increasing tonnages since decades. Gallium oxide (Ga₂O₃) is an emerging wide-bandgap transparent conductive oxide with as yet little industrial use. Since GaAs has received critical attention due to the arsenic ion, it seemed reasonable to compare its toxicology with the respective endpoints of Ga₂O₃ and In₂O₃ toxicology in order to find out if and to what extent arsenic contributes. In addition, the toxicology of Ga₂O₃ has not yet been adequately reviewed, Therefore, this review provides the first evaluation of all available toxicity data on Ga₂O₃. The acute toxicity of all three compounds is rather low. Subchronic inhalation studies in rats and mice revealed persistent pulmonary alveolar proteinosis (PAP) and/or alveolar histiocytic infiltrates down to the lowest tested concentration in rats and mice, i.e. 0.16 mg Ga₂O₃/m³. These are also the predominant effects after GaAs and In₂O₃ exposure at similarly low levels, i.e. 0.1 mg/m³ each. Subchronic Ga₂O₃ exposure caused a minimal microcytic anemia with erythrocytosis in rats (at 6.4 mg/m³ and greater) and mice (at 32 and 64 mg/m³), a decrease in epididymal sperm motility and concentration as well as testicular degeneration at 64 mg/m³. At comparable concentrations the hematological effects and male fertility of GaAs were much stronger. The stronger effects of GaAs are due to its better solubility and presumed higher bioavailability. The database for In₂O₃ is too small and subchronic testing was at very low levels to allow conclusive judgements if blood/blood forming or degrading and male fertility organs/tissues would also be targets.

Low-Cost, High-Performance Spray Pyrolysis-Grown Amorphous Zinc Tin Oxide: The Challenge of a Complex Growth Process

Transparent conductive oxides (TCOs) are important materials for a wide range of optoelectronic devices. Amorphous zinc tin oxide (a-ZTO) is a TCO and one of the best nontoxic, low-cost replacements for more expensive amorphous indium-gallium-zinc oxide. Here, we employ spray pyrolysis (SP), an inexpensive and versatile chemical vapor deposition-based technique, to synthesize a-ZTO with an as-deposited conductivity of ≈300 S/cm-the highest value hitherto among the reported solution-processed films. Compositional analysis via X-ray photoelectron spectroscopy reveals a nonstoichiometric transfer of Zn and Sn from the dissolved precursors into the film, with the best electrical properties achieved at a film composition of x_film = 0.38 ± 0.04 ((ZnO)_x(SnO₂)_1-x (0 < x < 1)). The morphology of these films is compared to films synthesized by physical vapor deposition (PVD), and a strong correlation between morphology and electrical properties is revealed. The granular nature of the SP-grown films, which seems like a drawback at first glance, brings about the prospect of using a-ZTO in ink-jet-printed films from a nanoparticle suspension for the room-temperature deposition. Brief post-anneal cycles in N₂ gas improve the conductivity of the films by means of grain boundary (GB) passivation.

Case reports of indium lung disease in Taiwan

The production of indium-tin oxide has increased in the past decades due to the increased manufacture of liquid crystal displays (LCD). Taiwan is one of the highest indium-consuming countries worldwide. After repeated inhalation, indium oxide (In₂O₃) particles would accumulate in the lungs, resulting in severe lung effects. We report two workers of an LCD producing facility with elevated serum indium level up to 149 and 73.8 μg/L (normal value <3.5 μg/L), which was much higher than that observed in previous case reports in Taiwan. We collected their detailed working history, symptoms, pulmonary function, radiologic findings, and followed up for more than one year. We also performed workplace evaluation of the facility. We observed that sandblasters who clean components of ITO thin-film production machinery by sandblasting with aluminum oxide tend to have higher indium exposure with worse pulmonary functions and HRCT findings.

Evaluation of cytotoxicity, apoptosis, and genotoxicity induced by indium chloride in macrophages through mitochondrial dysfunction and reactive oxygen species generation

Due to rapid advances in the era of electronic technologies, indium has played the important material for the production of liquid crystal display screens in the semiconductor and optoelectronic industries. The present study focuses on evaluating the toxic effects and related mechanisms of indium chloride (InCl3) on RAW264.7 macrophages. Cytotoxicity was induced by InCl3 in a concentration- and time-dependent manner. InCl3 had the ability to induce macrophage death through apoptosis rather than through necrosis. According to the cytokinesis-block micronucleus assay and alkaline single-cell gel electrophoresis assay, InCl3 induced DNA damage, also called genotoxicity, in a concentration-dependent manner. Cysteine-dependent aspartate-directed protease (caspase)-3, -8, and -9 were activated by InCl3 in a concentration-dependent manner. Mitochondria dysfunction and cytochrome c release from the mitochondria were induced by InCl3 in a concentration-dependent manner. Downregulation of BCL2 and upregulation of BAD were induced by InCl3 in a concentration-dependent manner. More, we proposed that InCl3 treatment generated reactive oxygen species (ROS) in a concentration-dependent manner. In conclusion, the current study revealed that InCl3 induced macrophage cytotoxicity, apoptosis, and genotoxicity via a mitochondria-dependent apoptotic pathway and ROS generation.

The early onset and persistent worsening pulmonary alveolar proteinosis in rats by indium oxide nanoparticles

Workplace inhalation exposure to indium compounds has been reported to produce 'indium lung disease' characterized by pulmonary alveolar proteinosis (PAP), granulomas, and pulmonary fibrosis. However, there is little information about the pulmonary toxicity of nano-sized indium oxide (In₂O₃), which is widely used in various applications such as liquid crystal displays. In this study, we evaluated the time-course and dose-dependent lung injuries by In₂O₃ nanoparticles (NPs) after a single intratracheal instillation to rats. In₂O₃ NPs were instilled to female Wistar rats at 7.5, 30, and 90 cm²/rat and lung injuries were evaluated at day 1, 3, 7, 14, 30, 90, and 180 after a single intratracheal instillation. Treatment of In₂O₃ NPs induced worsening diverse pathological changes including PAP, persistent neutrophilic inflammation, type II cell hyperplasia, foamy macrophages, and granulomas in a time- and dose-dependent manner. PAP was induced from day 3 and worsened throughout the study. The concentrations of interleukin-1β, tumor necrosis factor-α, and monocyte chemoattractant protein-1 in bronchoalveolar lavage fluid (BALF) showed dose- and time-dependent increases and the levels of these inflammatory mediators are consistent with the data of inflammatory cells in BALF and progressive lung damages by In₂O₃ NPs. This study suggests that a single inhalation exposure to In₂O₃ NPs can produce worsening lung damages such as PAP, chronic active inflammation, infiltration of foamy macrophages, and granulomas. The early onset and persistent PAP even at the very low dose (7.5 cm²/rat) implies that the re-evaluation of occupational recommended exposure limit for In₂O₃ NPs is urgently needed to protect workers.

Importance of Local Bond Order to Conduction in Amorphous, Transparent, Conducting Oxides: The Case of Amorphous ZnSnOy

In this report, reactive and nonreactive sputtering of amorphous ZnSnO_y (a-ZnSnO_y) was investigated, and extensive composition maps have been measured by X-ray photoelectron spectroscopy. The comprehensive analysis of the ((ZnO)_x(SnO₂)_1-x) composition reveals that the best Zn/Sn ratio for high conductivity of the material can vary depending on the deposition technique utilized. Best conductivities of 225 S/cm were found to occur at x = 0.32 for reactive sputtering of a Sn target and x = 0.27 for nonreactive sputtering of a SnO₂ target. These values correspond to unstable polymorphs of a-ZnSnO_y, ZnSn₂O₅, and ZnSn₃O₇. Distinct local bonding arrangements have been confirmed by Raman spectroscopy.

Metal(loid) oxide (Al2O3, Mn3O4, SiO2 and SnO2) nanoparticles cause cytotoxicity in yeast via intracellular generation of reactive oxygen species

In this work, the physicochemical characterization of five (Al₂O₃, In₂O₃, Mn₃O₄, SiO₂ and SnO₂) nanoparticles (NPs) was carried out. In addition, the evaluation of the possible toxic impacts of these NPs and the respective modes of action were performed using the yeast Saccharomyces cerevisiae. In general, in aqueous suspension, metal(loid) oxide (MOx) NPs displayed an overall negative charge and agglomerated; these NPs were practically insoluble (dissolution < 8%) and did not generate detectable amounts of reactive oxygen species (ROS) under abiotic conditions. Except In₂O₃ NPs, which did not induce an obvious toxic effect on yeast cells (up to 100 mg/L), the other NPs induced a loss of cell viability in a dose-dependent manner. The comparative analysis of the loss of cell viability induced by the NPs with the ions released by NPs (NPs supernatant) suggested that SiO₂ toxicity was mainly caused by the NPs themselves, Al₂O₃ and SnO₂ toxic effects could be attributed to both the NPs and the respective released ions and Mn₃O₄ harmfulness could be mainly due to the released ions. Al₂O₃, Mn₃O₄, SiO₂ and SnO₂ NPs induced the loss of metabolic activity and the generation of intracellular ROS without permeabilization of plasma membrane. The co-incubation of yeast cells with MOx NPs and a free radical scavenger (ascorbic acid) quenched intracellular ROS and significantly restored cell viability and metabolic activity. These results evidenced that the intracellular generation of ROS constituted the main cause of the cytotoxicity exhibited by yeasts treated with the MOx NPs. This study highlights the importance of a ROS-mediated mechanism in the toxicity induced by MOx NPs.