Bioresorbable electrospun mats of poly(D, L)-lactide/poly[(R, S)-3-hydroxybutyrate] blends for potential use in the treatment of difficult-to-heal skin wounds

Designing of Drug Delivery Systems to Improve the Antimicrobial Efficacy in the Periodontal Pocket Based on Biodegradable Polyesters

Delivery systems for biologically active substances such as proanthocyanidins (PCANs), produced in the form of electrospun nonwoven through the electrospinning method, were designed using a polymeric blend of poly(L-lactide-co-glycolide) (PLGA)and poly[(R,S)-3-hydroxybutyrate] ((R,S)-PHB). The studies involved the structural and thermal characteristics of the developed electrospun three-dimensional fibre matrices unloaded and loaded with PCANs. In the next step, the hydrolytic degradation tests of these systems were performed. The release profile of PCANs from the electrospun nonwoven was determined with the aid of UV-VIS spectroscopy. Approximately 30% of the PCANs were released from the tested electrospun nonwoven during the initial 15-20 days of incubation. The chemical structure of water-soluble oligomers that were formed after the hydrolytic degradation of the developed delivery system was identified through electrospray ionization mass spectrometry. Oligomers of lactic acid and OLAGA oligocopolyester, as well as oligo-3-hydroxybutyrate terminated with hydroxyl and carboxyl end groups, were recognized as degradation products released into the water during the incubation time. It was also demonstrated that variations in the degradation rate of individual mat components influenced the degradation pattern and the number of formed oligomers. The obtained results suggest that the incorporation of proanthocyanidins into the system slowed down the hydrolytic degradation process of the poly(L-lactide-co-glycolide)/poly[(R,S)-3-hydroxybutyrate] three-dimensional fibre matrix. In addition, in vitro cytotoxicity and antimicrobial studies advocate the use of PCANs for biomedical applications with promising antimicrobial activity.

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV))/Bacterial Cellulose (BC) Biocomposites for Potential Use in Biomedical Applications

The aim of this study was to obtain biocomposites consisting of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), bacterial cellulose (BC) and α-tocopherol by a melt processing technique for potential use in biomedical applications. The melt processing and roughness of biocomposites were evaluated and compared to sample without BC. The degradation rate of PHBV/BC biocomposites was measured in phosphate buffer saline (PBS) by determining the mass variation and evidencing of thermal and structural changes by differential scanning calorimetry (DSC) and attenuated total reflectance-Fourier transformed infrared spectrometry (ATR-FTIR). The cell viability, cell morphology, cell cycle distribution and total collagen content were investigated on murine NCTC fibroblasts. Overall, the adding of BC to polyester matrix led to an adequate melt processing of biocomposites and increased surface roughness and cytocompatibility, allowing the cells to secrete the extracellular matrix (collagen) and stimulate cell proliferation. Results showed that the PHBV/BC biocomposites were favorable for long-term degradation and could be used for the design of medical devices with controlled degradability.

Susceptibility to Degradation in Soil of Branched Polyesterurethane Blends with Polylactide and Starch

A very important method of reducing the amount of polymer waste in the environment is the introduction to the market of polymers susceptible to degradation under the influence of environmental factors. This paper presents the results of testing the susceptibility to degradation in soil of branched polyesterurethane (PUR) based on poly([R,S]-3-hydroxybutyrate) (R,S-PHB), modified with poly([D,L]-lactide) (PLA) and starch (St). Weight losses of samples and changes in surface morphology (SEM, OM and contact angle system) with simultaneously only slight changes in molecular weight (GPC), chemical structure (FTIR and ¹HNMR) and thermal properties (DSC) indicate that these materials are subject to enzymatic degradation caused by the presence of microorganisms in the soil. Chemical modification of branched polyesterurethanes with R,S-PHB and their physical blending with small amounts of PLA and St resulted in a slow but progressive degradation of the samples.

Special Features of Polyester-Based Materials for Medical Applications

This article presents current possibilities of using polyester-based materials in hard and soft tissue engineering, wound dressings, surgical implants, vascular reconstructive surgery, ophthalmology, and other medical applications. The review summarizes the recent literature on the key features of processing methods and potential suitable combinations of polyester-based materials with improved physicochemical and biological properties that meet the specific requirements for selected medical fields. The polyester materials used in multiresistant infection prevention, including during the COVID-19 pandemic, as well as aspects covering environmental concerns, current risks and limitations, and potential future directions are also addressed. Depending on the different features of polyester types, as well as their specific medical applications, it can be generally estimated that 25–50% polyesters are used in the medical field, while an increase of at least 20% has been achieved since the COVID-19 pandemic started. The remaining percentage is provided by other types of natural or synthetic polymers; i.e., 25% polyolefins in personal protection equipment (PPE).

Copper metal-organic framework embedded carboxymethyl chitosan-g-glutathione/polyacrylamide hydrogels for killing bacteria and promoting wound healing

Bacterial infection and its induced oxidative stress as major clinical challenge during wound healing call for an urgent response for the development of medical dressings with multi-functions, such as antioxidant and antibacterial. To meet this demand, copper metal organic framework nanoparticles (HKUST NPs) and carboxymethyl chitosan-g-glutathione (CMCs-GSH) were synthesized and characterized. By embedding HKUST NPs into PAM/CMCs-GSH hydrogel (AOH), we developed a novel hydrogel dressing (HKUST-Hs) with dual effects of antibacterial and antioxidant. The morphology, swelling behavior, oxidation resistance and antibacterial properties of HKUST-Hs were investigated as well as the slow-release behavior of copper ions. Full-thickness cutaneous wound model of rats was created to assess the promoting effect of HKUST-Hs on wound healing. We found that HKUST NPs could be well dispersed in HKUST-Hs by shielding the positive charge of copper ions, and thus copper ions released were uniformly distributed and chelated with CMCs-GSH to promote the swelling stability of HKUST-Hs. Also, HKUST-Hs exhibited good free radical scavenging ability in vitro antioxidant assay. Meanwhile, a gradient sustained-release system of copper ions was formed in HKUST-Hs owing to the inhibition of HKUST NPs to copper release and the chelation of CMCs-GSH, which effectively inhibited the explosive release of copper ions and prolonged the release period, thereby reducing cytotoxicity. In vitro antibacterial test demonstrated there was synergistic antibacterial effect between the slow-released copper ions and CMCs-GSH, which improved the antibacterial activity and antibacterial persistence of HKUST-Hs. Finally, HKUST-Hs accelerated wound healing in vivo by continuously killing bacteria and inhibiting oxidative stress.