Microstructure changes of sodium carbonate-soluble pectin of peach by AFM during controlled atmosphere storage

Atomic force microscopy in food preservation research: New insights to overcome spoilage issues

A higher level of food safety is required due to the fast-growing human population along with the increased awareness of healthy lifestyles. Currently, a large percentage of food is spoiled during storage and processing due to enzymes and microbial activity, causing huge economic losses to both producers and consumers. Atomic force microscopy (AFM), as a powerful scanning probe microscopy, has been successfully and widely used in food preservation research. This technique allows a non-invasive examination of food products, providing high-resolution images of surface structure and individual polymers as well as the physical properties and adhesion of single molecules. In this paper, detailed applications of AFM in food preservation are reviewed. AFM has been used to provide comprehensive information in food preservation by evaluating the spoilage with its related structure modification. By utilizing AFM imaging and force measurement function, the main mechanisms involved in the loss of food quality and preservation technologies development can be further elucidated. It is also capable of exploring the activities of enzymes and microbes in influencing the quality of food products during storage. AFM provides comprehensive solutions to overcome spoilage issues with its versatile functions and high-throughput outcomes. Further research and development of this novel technique in order to solve integrated problems in food preservation are necessary.

Effects of Controlled Atmosphere on the Storage Quality and Aroma Compounds of Lemon Fruits Using the Designed Automatic Control Apparatus

‘Eureka' lemon fruits were stored under four controlled atmosphere- (CA-) combinations at 8°C for 20 days to investigate the effects on weight loss (WL), total soluble solids (TSS), titratable acidity (TA), vitamin C (VC), total phenolic content (TPC), sodium carbonate-soluble pectin (SSP), malondialdehyde (MDA), and volatile compounds. Results showed that the contents of TSS, TA, VC, and SSP in the stored fruits reduced during the storage period, while the WL and MDA increased. Fruit stored under CA2-combination (6 % O₂+8 % CO₂) showed the lower contents of WL and MDA and the higher content of TSS, TA, TPC, and VC than that of other treated fruits. The main volatile compounds present in the lemons were terpenoids, aldehydes, alcohols, and esters. In addition, both the terpenoid and aldehyde content are substantially higher in lemons exposed to CA2 conditions. In contrast, the alcohols and esters displayed elevated levels in the regular air (RA) stored fruit. In conclusion, CA with the suitable conditions proves to be better than RA as a storage regimen to keep the quality of lemons. These results indicated that the application of 6% O₂+8% CO₂ CA conditions could maintain the quality of ‘Eureka' lemon fruit during the storage time of 20 days and should be the optimal storage environment for postharvest Eureka lemons.

Role of Melatonin in Cell-Wall Disassembly and Chilling Tolerance in Cold-Stored Peach Fruit

Melatonin reportedly increases chilling tolerance in postharvest peach fruit during cold storage, but information on its effects on cell-wall disassembly in chilling-injured peaches is limited. In this study, we investigated the role of cell-wall depolymerization in chilling-tolerance induction in melatonin-treated peaches. Treatment with 100 μM melatonin alleviated chilling symptoms (mealiness) characterized by a decrease in fruit firmness and increase in juice extractability in treated peaches during storage. The loss of neutral sugars, such as arabinose and galactose, in both the 1,2-cyclohexylenedinitrilotetraacetic acid (CDTA)- and Na₂CO₃-soluble fractions was observed at 7 days in treated peaches, but the contents increased after 28 days of storage. Atomic-force-microscopy (AFM) analysis revealed that the polysaccharide widths in the CDTA- and Na₂CO₃-soluble fractions in the treated fruit were mainly distributed in a shorter range, as compared with those in the control fruit. In addition, the expression profiles of a series of cell-wall-related genes showed that melatonin treatment maintained the balance between transcripts of PpPME and PpPG, which accompany the up-regulation of several other genes involved in cell-wall disassembly. Taken together, our results suggested that the reduced mealiness by melatonin was probably associated with its positive regulation of numerous cell-wall-modifying enzymes and proteins; thus, the depolymerization of the cell-wall polysaccharides in the peaches treated with melatonin was maintained, and the treated fruit could soften gradually during cold storage.

Fruit softening and pectin disassembly: an overview of nanostructural pectin modifications assessed by atomic force microscopy

BACKGROUND

One of the main factors that reduce fruit quality and lead to economically important losses is oversoftening. Textural changes during fruit ripening are mainly due to the dissolution of the middle lamella, the reduction of cell-to-cell adhesion and the weakening of parenchyma cell walls as a result of the action of cell wall modifying enzymes. Pectins, major components of fruit cell walls, are extensively modified during ripening. These changes include solubilization, depolymerization and the loss of neutral side chains. Recent evidence in strawberry and apple, fruits with a soft or crisp texture at ripening, suggests that pectin disassembly is a key factor in textural changes. In both these fruits, softening was reduced as result of antisense downregulation of polygalacturonase genes. Changes in pectic polymer size, composition and structure have traditionally been studied by conventional techniques, most of them relying on bulk analysis of a population of polysaccharides, and studies focusing on modifications at the nanostructural level are scarce. Atomic force microscopy (AFM) allows the study of individual polymers at high magnification and with minimal sample preparation; however, AFM has rarely been employed to analyse pectin disassembly during fruit ripening.

SCOPE

In this review, the main features of the pectin disassembly process during fruit ripening are first discussed, and then the nanostructural characterization of fruit pectins by AFM and its relationship with texture and postharvest fruit shelf life is reviewed. In general, fruit pectins are visualized under AFM as linear chains, a few of which show long branches, and aggregates. Number- and weight-average values obtained from these images are in good agreement with chromatographic analyses. Most AFM studies indicate reductions in the length of individual pectin chains and the frequency of aggregates as the fruits ripen. Pectins extracted with sodium carbonate, supposedly located within the primary cell wall, are the most affected.

The applications of nanotechnology in food industry

Nanotechnology has the potential of application in the food industry and processing as new tools for pathogen detection, disease treatment delivery systems, food packaging, and delivery of bioactive compounds to target sites. The application of nanotechnology in food systems will provide new methods to improve safety and the nutritional value of food products. This article will review the current advances of applications of nanotechnology in food science and technology. Also, it describes new current food laws for nanofood and novel articles in the field of risk assessment of using nanotechnology in the food industry.

Rheological and microstructural investigation of oat β-glucan isolates varying in molecular weight

The rheological properties and microstructure of aqueous oat β-glucan solutions varying in molecular weight were investigated. The structural features and molecular weights (MW) were characterized by (13)C NMR spectroscopy and high performance size-exclusion chromatography (HPSEC), respectively. The microstructure of the β-glucans dispersions was also examined by atomic force microscopy (AFM). The samples with β-glucan content between 78 and 86% on a dry weight basis had MW, intrinsic viscosity ([η]) and critical concentration (c*) in the range of 142-2800×10(3)g/mol, 1.7-7.2dl/g and 0.25-1.10g/dl, respectively. The flow and viscoelastic behaviour was highly dependent on MW and on the concentration of the β-glucans dispersions. Pseudoplastic behaviour was exhibited at high concentrations and Newtonian behaviour was evident at low concentrations. At the same concentration, the viscosity was higher for higher MW samples. The Cox-Merz rule was applicable for the lower molecular weight samples at higher concentrations whereas the high molecular weight sample deviated at concentrations greater than 1.0%, w/v. The mechanical spectra with variation of both MW and concentration were typical of entangled biopolymer solutions. AFM images revealed the formation of clusters or aggregates linked via individual polymer chains scattered heterogeneously throughout the system. The aggregate size increased with the molecular weight of the samples investigated and has been linked to the rheological behaviour of the samples.

Advances in research on structural characterisation of agricultural products using atomic force microscopy

Atomic force microscopy (AFM) has many unique features compared with other conventional microscopies, such as high magnification with high resolution, minimal sample preparation, acquiring 2D and 3D images at the same time, observing ongoing processes directly, the possibility of manipulating macromolecules, etc. As a nanotechnology tool, AFM has been used to investigate the nanostructure of materials in many fields. This mini-review focuses mainly on its latest application to characterise the macromolecular nanostructure and surface topography of agricultural products. First the fundamentals of AFM are briefly explained. Then the macromolecular nanostructure information on agricultural products from AFM images is introduced by exploring the structure-function relationship in three aspects: agricultural product processing, agricultural product ripening and storage, and genetic and environmental factors. The surface topography characterisation of agricultural products using AFM is also discussed. The results reveal that AFM could be a powerful nanotechnology tool to acquire a deeper understanding of the mechanisms of structure and quality variations of agricultural products, which could be instructive in improving processing and storage technologies, and AFM is also helpful to reveal the essential nature of a product at nanoscale.

Identification of extensin protein associated with sugar beet pectin

Several studies have suggested that the emulsification properties associated with pectin obtained from sugar beet (Beta vulgaris) are due to the presence of a protein-pectin complex. Nevertheless, the identity of the protein has remained elusive. Pectin, extracted from sugar beet pulp by microwave-assisted extraction, and a commercial sample were both subjected to protease digestion with trypsin. The resulting peptides were separated from the pectin solution by ultrafiltration using a 3 kDa molecular weight cutoff (MWCO) membrane and analyzed using matrix-assisted laser desorption ionization with tandem time-of-flight mass spectrometry. The partial sequences derived from the mass spectrometry analyses of the resulting tryptic peptides are found to be highly consistent with extensin protein matched from the B. vulgaris Genetic Index database and also correspond to previously reported extensin peptides found in sugar beet cell suspension cultures. Further attempts were made to disassociate the protein from pectin using 1 M NaCl and a 100 kDa MWCO membrane; however, no peptides were observed following trypsin digestion of the permeate solution. This evidence suggests the existence of a complex between the pectin and extensin that is not due to ionic interactions. Trypsin digestion of commercial sugar beet pectin also produced the peptide profile observed with the microwave-assisted extracted pectin sample. Atomic force microscopy established that the number of rod-like elements decreased following protease treatment compared to the untreated sample.

Global Structures of High Methoxyl Pectin from Solution and in Gels

Images of high methoxyl orange pectin deposited from solution and high methoxyl sugar acid gels (HMSAG) were obtained by atomic force microscopy (AFM) in the tapping mode. For the first time, images of pectin deposited from water revealed that the transition from pectin networks to individual molecules or aggregates thereof occurred at concentrations between 6.5 and 13.1 microg/mL. At 6.5 microg/mL, shapes included rods, segmented rods, kinked rods, rings, branched molecules, and dense circular areas. At 13.1 microg/mL, all of these shapes were integrated into networks. These same structures were discernible in pectin high methoxyl sugar acid gels. Thus one might consider pectin networks in water at concentrations in excess of 10 microg/mL to be separate fluid precursors of networks in high methoxyl sugar acid gels. Examination of AFM images revealed that gels with "uniform" distribution of strands and pores between strands had higher gel strengths as measured by a penetrometer than gels in which strands were nonuniformly distributed and were separated by large and small spaces.