Characterisation of binding of iron to sodium caseinate and whey protein isolate

Reduced allergenicity of hydrolysed whey protein concentrate complexed with iron: the effect of different enzymes, degree of hydrolysis and ascorbic acid

Cow's milk allergy is a hypersensitivity reaction to bovine milk proteins and is immune-related. β-lactoglobulin, the primary allergenic protein found in milk, is a whey protein with a higher biological value than casein. The study aimed to develop a hypoallergenic fortified supplement, with hydrolysed whey proteins as a channel for iron fortification. A degree of hydrolysis (DH) of upto five per cent was selected for better functional properties. The allergenicity of eleven treatments including protein hydrolysates, iron complexed protein hydrolysates, at both 3% and 5% degree of hydrolysis and all complexes with added ascorbic acid were analyzed by direct ELISA based on the ability to bind the specific IgE antibody coated plates.The antibodies specific to the whey protein allergen β-lactoglobulin were used in the present study. Allergy studies revealed a reduction in the allergenicity of iron-complexed whey protein (23%) and iron-complexed hydrolysates (28.27-59%). Allergenicity was further reduced (53.59-60.63%) when protein hydrolysate was complexed with iron in the presence of ascorbic acid. Statistical analysis at 0.01level of significance (P value 0.001) revealed significant differences among all treatments.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-024-06085-y.

Iron-based microbial interactions: the role of iron metabolism in the cheese ecosystem

Iron is involved in various microbial metabolisms and interactions and is an essential micronutrient for most microorganisms. This review focuses on the cheese ecosystem, in which iron is sparse (median concentration of 2.9 mg/kg based on a literature survey) and of limited bioavailability due to the presence of various metal-binding agents in the cheese matrix. Cheese microorganisms overcome this low bioavailability of iron by producing and/or importing ferric iron-specific chelators called siderophores. We introduce these siderophores and their specific transporters, which play a key role in ecological interactions and microbial metabolism. We discuss the impact of iron on all the major taxa (fungi, bacteria, and viruses) and functional groups (starters, ripening microorganisms, and pathogens) present and interacting in cheese, from the community to individual levels. We describe the ways in which cheese-ripening microorganisms use iron and the effects of iron limitation on major metabolic pathways, including the tricarboxylic acid (TCA) cycle and amino-acid biosynthesis. The cheese ecosystem is a relevant in situ model for improving our understanding of iron biochemistry and its putative role in microbe-microbe interactions. Yet, this review highlights critical gaps in our understanding of iron's role in cheese from fundamental ecological and biochemical perspectives to applied microbiology, with broader implications for the quality, safety, and organoleptic properties of cheese.

Lactoferrin thermal stabilization and iron(II) fortification through ternary complex fabrication with succinylated sodium caseinate

A thermally stable co-delivery system for lactoferrin (LF) and iron(II) was developed to address iron deficiency anemia. Complexes were formed between LF, succinylated sodium caseinate (S.NaCas) and FeSO4 with high yield (∼85%). LF-S.NaCas-Fe complexes achieved loading capacities for iron(II) between 2.5 and 12 mg g-1and LF loading capacities between 250 and 690 mg g-1, depending upon initial Fe2+ concentrations and LF ratios. The LF-S.NaCas complex mixtures appeared as smooth cubic particles in SEM, and gradually aggregated to amorphous particles as th iron(II) concentration increased due to iron-facilitated cross-linking. The complexation significantly improved LF thermal stability and addressed the poor solubility of iron(II) under neutral pH. After thermal treatment (95 °C, 5 min), the rehydrated complexes retained 68%-90% LF, with <10% iron(II) release. Circular dichroism spectra showed the secondary structure of the complexed LF was well retained during thermal treatment. This thermally stable system showed great potential in LF thermal protection and iron(II) fortification.

Effect of different iron ratios on interaction and thermodynamic stability of bound whey protein isolate

Whey protein isolates (WPI) are known to have mineral-binding capacity to promote iron absorption. The aim of this study was to investigate the effect of iron ratio on the conformational structure of iron-bound whey protein isolate (WPI-Fe) and its thermodynamic stability. It was shown that the iron to protein ratio affects both the iron binding capacity of WPI and the iron valence state on the surface of WPI-Fe complexes. As the iron content increases, aggregation between protein molecules occurs. In addition, WPI-Fe nanoparticles have thermodynamic stability and Fe2+ has a high affinity with WPI for spontaneous exothermic reactions. This study demonstrates that WPI-Fe complexes can be used to efficiently deliver high-quality iron source (Fe2+) for future iron supplements.

Comparative Analysis of Spray-Dried Porcine Plasma and Hydrolyzed Porcine Protein as Animal-Blood-Derived Protein Ingredients for Pet Nutrition

Spray-dried porcine plasma (SDPP) and hydrolyzed porcine protein (HPP) are promising animal protein ingredients sourced from healthy animal blood that are rich in biomolecules, including immunoglobulins, and can be an appropriate and valuable animal protein ingredient to supply the growing need for ingredients that meet the natural needs of carnivorous pets. The aim of this preliminary study was to analyze the chemical composition and mineral profile of a novel HPP compared with results for SDPP. The basic composition analysis followed AOAC guidelines, and the elemental analysis utilized atomic absorption spectrometry. Statistical comparisons employed an independent Student's t-test (p < 0.05). Both SDPP and HPP are low in moisture (<4.3%) and rich in protein, with SDPP significantly exceeding HPP (75.4% vs. 71.4%). They boast mineral richness indicated by crude ash content (12.7% and 12.5%), featuring Na, K, P, and the trace elements Mo, Fe, and Zn. Notably, SDPP contains elevated molybdenum levels (51.39 mg/100 g vs. 10.93 mg/100 g in HPP), an essential element for diverse animal functions. Quantifying these elements in raw materials aids in achieving optimal nutrient levels in the final product. The study underscores SDPP as an excellent protein source, confirming that its nutritional value is similar to or better than other protein components in pet food.

Recent advances in iron encapsulation and its application in food fortification

Iron (Fe) is an important element for our body since it takes part in a huge variety of metabolic processes. However, the direct incorporation of Fe into food fortification causes a number of problems along with undesirable organoleptic properties. Thus, encapsulation has been suggested to alleviate this problem. This study first sheds more light on the Fe encapsulation strategies and comprehensively explains the results of Fe encapsulation studies in the last decade. Then, the latest attempts to use Fe (in free or encapsulated forms) to fortify foods such as bakery products, dairy products, rice, lipid-containing foods, salt, fruit/vegetable-based products, and infant formula are presented. Double emulsions are highly effective at keeping their Fe content and display encapsulation efficiency (EE) > 88% although it decreases upon storage. The encapsulation by gel beads possesses several advantages including high EE, as well as reduced and great Fe release in gastric and duodenal conditions, respectively. Cereals, particularly bread and wheat, are common staple foods globally; they are very suitable for food fortification by Fe derivatives. Nevertheless, the majority of Fe in flour is available as salts of phytic acid (IP6) and phytates, reducing Fe bioavailability in the human body. The sourdough process degrades IP6 completely while Chorleywood Bread Making Process and conventional processes decrease it by 75% in comparison with whole meal flour.

Chemical Composition and Functional Properties of Spray-Dried Animal Plasma and Its Contributions to Livestock and Pet Health: A Review

Spray-dried animal plasma (SDAP) is a functional ingredient derived from healthy animal blood, used as a nutritional additive in livestock and pet nutrition. SDAP is rich in macronutrients, micronutrients, and bioactive compounds such as immunoglobulins, albumin, growth factors, peptides, transferrin, and enzymes. This review focuses on the chemical composition of SDAP from porcine, bovine, and poultry sources, including protein quality and mineral profile. SDAP enhances performance and health in monogastric farm animals, aquaculture, and pets. It promotes growth rates and feed intake due to its high digestibility and superior amino acid profile compared to other protein sources. In pigs, SDAP's positive effects stem from tissue-specific actions in the gastrointestinal tract, impacting digestion, immunity, and barrier function. For poultry, SDAP shows promise as a substitute for antibiotic growth promoters, particularly in chick starter diets. SDAP contains functional proteins that regulate immune response, enhance intestinal health, and aid in stress conditions. It is also used as a binder in pet food, providing high protein content and other desirable properties. SDAP meets the dietary requirements of carnivorous pets, appealing to owners seeking animal-derived protein sources. Additionally, SDAP may help prevent cognitive impairment in senior dogs and cats.

Designing ultra-stable linseed oil-in-water Mickering emulsions using whey protein isolate cold-set microgels containing marjoram aqueous extract: Effect of pH and extract on rheological, physical, and chemical properties

In this study, whey protein isolate (WPI) cold-set microgels containing marjoram (Origanum majorana) aqueous extract (MAE) were prepared at different pHs (4.0, 5.0, and 6.0). After characterization, the microgel dispersion was used to stabilize linseed oil-in-water Mickering emulsions (MEs). The resultant MEs were then characterized in terms of physicochemical and rheological properties under the effect of pH and MAE addition. The morphology, particle size, zeta potential, and interfacial tension of microgels were affected by pH and MAE. XRD patterns showed the amorphous structure. Microgel-stabilized MEs did not reveal any significant sign of instability under gravity during 6 months of storage. All MEs had dominant elastic character. Despite the lowest zeta potential values, MEs prepared at pH 4 showed the highest physical stability against gravity but the lowest centrifugal stability against oiling off, which indicated that both viscous and elastic components are required for MEs stability. This sample had the highest apparent viscosity and the strongest viscoelastic properties. Rheological data were best fitted with Herschel-Bulkley and Power Law models. An increase in pH and presence of MAE improved the oxidative stability of MEs. The results of this study showed that WPI microgels are appropriate candidate for long-term stabilization of linseed oil-in-water MEs. The presence of MAE is useful in designing special emulsions in which the aqueous phase is partially replaced by the aqueous extract of medicinal plants.

Development of iron-vitamin multilayer encapsulates using 3 fluid nozzle spray drying

Considering the growing concern of iron and folic acid deficiency, encapsulation of these nutrients and fortification into foods is emerging as an effective counter-strategy. The present work focuses on a scalable approach for the production of iron, ascorbic acid, and folic acid core-shell encapsulates using novel 3-fluid nozzle (3FN) spray drying with whey protein as core and either pectin or hydroxypropyl methylcellulose (HPMC) as shell polymers. The effect of shell formation was observed by comparing core-shell encapsulates with conventional 2-fluid nozzle (2FN) encapsulates. Also, the effect of pH of whey protein on the color of encapsulates is noteworthy; reducing the pH to 4.0 significantly improved the lightness value (52.91 ± 0.13) when compared with the encapsulates with native pH (38.91 ± 0.58). Furthermore, sample with pectin as shell polymer exhibited fair flowability with lowest values of Hausner ratio (1.25 ± 0.04) and Carr's index (20.06 ± 2.71) and highest encapsulation efficiency for folic acid (86.07 ± 5.24%). Whereas, encapsulates having HPMC as shell polymer showed highest lightness value (60.80 ± 0.32) and highest encapsulation efficiency for iron (87.28 ± 4.15%). The formation of core-shell structure was confirmed by evaluation of the surface composition which showed reduced amine bonds and increased aliphatic and carbonyl bonds in the encapsulates prepared by 3FN spray drying. The encapsulates prepared without adjusting whey protein pH showed the least release (∼51 % in 24 h) and bioaccessibility (∼56%) of iron indicating the iron-whey protein complex formation. Based on appearance, smooth surface morphology, flowability, and release behavior, a combination of whey protein and pectin is recommended for co-encapsulation of iron, folic acid and ascorbic acid.

Effect of the Emulsifier Used in Dunaliella salina-Based Nanoemulsions Formulation on the β-Carotene Absorption and Metabolism in Rats

SCOPE

Microalgae such as Dunaliella salina are a potential sustainable source of natural β-carotene due to their fast growth and high adaptability to environmental conditions. This work aims to evaluate the effect of the incorporation of β-carotene from this alga into different emulsifier-type nanoemulsions (soybean lecithin [SBL], whey protein isolate [WPI], sodium caseinate [SDC]) on its absorption, metabolization, and biodistribution in rats.

METHODS AND RESULTS

Nanoemulsions formulated with different emulsifiers at 8% concentration are obtained by five cycles of microfluidization at 130 mPa, then expose to an in vitro digestion or orally administer to rats. Feeding rats with nanoemulsions improves β-carotene uptake compared to control suspension, especially using SDC and WPI as emulsifiers. A greater presence of β-carotene and retinol in the intestine, plasma, and liver is observed, being the liver the tissue that shows the highest accumulation. This fact can be a consequence of the smaller droplets that protein-nanoemulsions present compared to that with SBL in the intestine of rats, which promote faster digestibility and higher β-carotene bioaccessibility (35%-50% more) according to the in vitro observations.

CONCLUSIONS

Nanoemulsions, especially those formulated with protein emulsifiers, are effective systems for increasing β-carotene absorption, as well as retinol concentration in different rat tissues.

Plant Protein versus Dairy Proteins: A pH-Dependency Investigation on Their Structure and Functional Properties

Plant proteins are constantly gaining attention as potential substitutes for dairy proteins, due to their suitable functionality and nutritional value. This study was designed to compare the structural and functional responses of different plant protein isolates (soy, pea, lentil, and chickpea) with two commonly used dairy protein (whey protein isolates and sodium caseinate) under different pH treatments (pH 3.0, 5.0, 7.0, and 9.0). The results showed that pH had a different alteration on the structural, surface properties and functional properties of plant and dairy proteins. Plant protein generally possessed a darker color, lower solubility, emulsifying properties, and foaming capacity, whereas their foaming stability and water holding capacity were higher than those of dairy proteins. Soy protein isolates were characterized by its comparable proportion of β-turn and random coils, zeta-potential, emulsifying (30.37 m²/g), and water-holding capacity (9.03 g/g) at alkaline conditions and chickpea protein isolates showed good oil-holding capacity (3.33 g/g at pH 9) among plant proteins. Further analysis confirmed that pH had a greater influence on the structural and functional properties of proteins as compared to protein sources, particularly at acidic conditions. Overall, this study might help processors select the appropriate plant protein as dairy alternatives for their target application in plant-based food products.

Physicochemical and rheological characterizations of a novel exopolysaccharide EPSKar1 and its iron complex EPSKar1-Fe: Towards potential iron-fortification applications

Iron is a micronutrient essential for human health and physiology. Iron-deficiency anemia, the most common form of anemia, may occur from an iron homeostasis imbalance. Iron fortification is a promising and most sustainable and affordable solution to tackle the global prevalence of this anemia. Herein, we investigate physicochemical, rheological and stability characteristics of a novel exopolysaccharide 'EPSKar1' (derived from Lacticaseibacillus rhamnosus strain Kar1) and its iron complex 'EPSKar1-Fe (II)'. Our findings demonstrate that EPSKar1 is a high molecular-weight (7.8 × 10⁵ Da) branched-chain heteropolysaccharide composed of galactose, N-acetylglucosamine, and mannose in a molar ratio of 8:4:1, respectively, and exhibits strong emulsifying and water-holding capacities. We find that EPSKar1 forms strong complexes with Fe, wherein the interactions between EPSKar1-Fe (II) complexes are mediated by sulfate, carboxyl, and hydroxyl groups. The rheological analyses reveal that the EPSKar1 and EPSKar1-Fe (II) complexes exhibited shear thickening and thinning properties in skim milk and water, respectively; however, the suspension of EPSKar1 in skim milk is viscoelastic with predominantly elastic response (G'>G" and tan δ < 1). In comparison, EPSKar1-Fe (II) complex exhibits remarkable stability under various processing conditions, highlighting its usefulness for the development of fortified dairy products. Together, these findings underpin considerable prospects of EPSKar1-Fe (II) complex as a novel iron-fortifier possessing multifarious rheological benefits for food applications.

Effects of Proteins and Mineral Ions on the Physicochemical Properties of 1,3-Dioleoyl-2-Palmitoylglycerol Emulsion to Mimic a Liquid Infant Formula

Proteins and minerals in infant formula not only serve as nutrients, but also have important effects on the physical and chemical stability of emulsions. In this study, calcium carbonate (0 or 9.08 mM) and potassium chloride (0 or 15.96 mM), as representatives of divalent and monovalent minerals, were added to 1,3-dioleoyl-2-palmitoylglycerol (OPO) emulsions in different ratios (10:0, 9:1, 6:4, 5:5, and 0:10) of whey protein isolate (WPI) and sodium caseinate (CN). The influence of proteins and minerals on emulsion stability was investigated by analyzing particle size, zeta potential, creaming index, rheological properties, storage stability, and lipid oxidation. 1,3-dioleoyl-2-palmitoylglycerol (OPO) emulsions could be destabilized by adding Ca²⁺, as shown by the increase in particle size index, creaming index, and the decrease in zeta potential magnitude. Divalent ions could affect the electrostatic interactions between lipid droplets and the interactive effects of ion surface adsorption. In addition, the effect of different protein ratios on the physical stability of emulsions was not significant under the same ion-type conditions. In terms of chemical stability, higher oxidized values were found in emulsions stabilized with only CN than in those containing WPI. Our study showed that protein ratios and minerals played an important role in the stability of OPO emulsions, which might provide a reference for the development and utilization of liquid infant formula.

Preparation and characterization of iron-chelating peptides from whey protein: An alternative approach for chemical iron fortification

Iron fortification of staple food is a strategy utilized worldwide to address the concern of dietary iron deficiency. However, traditional salt-based fortification methods have limitations with gastrointestinal stability and bioavailability. Iron chelating peptides from easily available and scalable proteins such as whey protein have been proposed as promising candidates to circumvent the above mentioned limitations by enhancing iron absorption and bioavailability. In this study, we report methods to produce whey protein derived iron-chelating peptides and describe their physicochemical characteristics. Peptides derived from whey proteins prepared by ultrafiltration of whey followed by hydrolysation were iron chelated to produce peptide-iron complexes. These complexes had a size of 422.9 ± 3.41 nm, chelated iron content of 36.42 µg/ mg protein, and a low zeta potential (-10.80 mV) compared to whey peptides. Spectra analysis using ultraviolet-visible absorption and Fourier transform infrared spectroscopy showed structural transformation indicating iron chelation. Mass spectrometric analysis using LC-MS/MS confirmed the presence of both hydrophilic and hydrophobic peptides in the complexes with sizes ranging from 275 Da to 1916 Da. Furthermore, reduction in the antioxidant property of peptides following iron complexing indicates iron chelation. Our results suggest that whey protein derived peptide-iron complexes can be used as a potential alternative for chemical iron fortificants for food products and also as iron supplements.

Iron-caseinglycomacropeptide complexes: Characterization and application in beverages

Complexing iron with organic compounds has been considered an alternative strategy to mitigate the problems associated with the level of bioavailable iron and the acceptability of products supplemented with this mineral. CMP contains specific amino acids associated with iron binding. The present study aims to optimize the conditions of Fe/CMP complex formation and understand the molecular basis of interactions between CMP and iron ions. Results showed that CMP can bind ferrous iron in a 1:1.5 M ratio, forming a stable peptide-iron complex, where CMP assembles in a tetrameric form. FTIR spectra indicated that iron binding altered the secondary structures of CMP. The iron-binding sites of CMP corresponded primarily to acid residues of Glu, Asp and sialic acid. Moreover, Fe/CMP complex remained stable in a wide pH range (2.0-6.5), suggesting the adequacy to be efficiently added in food or beverages and to keeping complexed in the digestion environment. Finally, Fe/CMP complex was added to a commercial beverage (2 mg of Fe per serving of beverage) and no changes were observed in their colour during storage. A model to explain the binding between CMP and iron is proposed. These results suggest a potential application of this peptide for iron fortification.

Peptide-metal complexes: obtention and role in increasing bioavailability and decreasing the pro-oxidant effect of minerals

Bioactive peptides derived from food protein sources have been widely studied in the last years, and scientific researchers have been proving their role in human health, beyond their nutritional value. Several bioactivities have been attributed to these peptides, such as immunomodulatory, antimicrobial, antioxidant, antihypertensive, and opioid. Among them, metal-binding capacity has gained prominence. Mineral chelating peptides have shown potential to be applied in food products so as to decrease mineral deficiencies since peptide-metal complexes could enhance their bioavailability. Furthermore, many studies have been investigating their potential to decrease the Fe pro-oxidant effect by forming a stable structure with the metal and avoiding its interaction with other food constituents. These complexes can be formed during gastrointestinal digestion or can be synthesized prior to intake, with the aim to protect the mineral through the gastrointestinal tract. This review addresses: (i) the amino acid residues for metal-binding peptides and their main protein sources, (ii) peptide-metal complexation prior to or during gastrointestinal digestion, (iii) the function of metal (especially Fe, Ca, and Zn)-binding peptides on the metal bioavailability and (iv) their reactivity and possible pro-oxidant and side effects.

Fish Oil Emulsions Stabilized with Caseinate Glycated by Dextran: Physicochemical Stability and Gastrointestinal Fate

Incorporation of fish oil containing ω-3 polyunsaturated fatty acids (PUFAs) into functional foods remains challenging. In this study, caseinate and glycoconjugates (CD6, CD40, CD70, CD100) of caseinate to dextrans of different molecular weights (D6, D40, D70, D100 kDa) were used to stabilize fish oil emulsions, and the impact on physicochemical stability and gastrointestinal fate was investigated. The glycoconjugate of CD6 exhibited significantly higher conjugation efficiency, lower surface hydrophobicity ( H0), and lower surface activity than other glycoconjugates. The glycoconjugate of CD70 displayed the best emulsifying activity and emulsion stability. Except CD6 stabilized emulsions, all other emulsions showed fine storage stability over 14 d at 22 ± 1 °C. The glycoconjugate stabilized emulsions exhibited significantly lower peroxide value (PV) ( P < 0.05) than that of the caseinate stabilized one. During in vitro gastrointestinal tract digestion, the glycation of caseinate with dextrans changed the ζ-potential, average particle size ( D₃₂), and particle size distribution of the emulsions, which influenced flocculation and coalescence of droplets, as demonstrated by confocal microscopy. Caseinate after glycation with dextrans significantly retarded the release of free fatty acids from emulsions ( P < 0.05) during in vitro lipolysis. These results suggested that the dextrans attached to caseinate by glycation played a vital role in physicochemical stability and gastrointestinal fate of emulsions, mainly by its steric hindrance to effectively prevent flocculation and coalescence of droplets.

Microencapsulation of Phosphorylated Human-Like Collagen-Calcium Chelates for Controlled Delivery and Improved Bioavailability

The bioavailability of Phosphorylated Human-like Collagen-calcium chelates (PHLC-Ca) as calcium supplement is influenced by the extremely low pH and proteolytic enzymes in the gastrointestinal tract. This study addresses these issues by microencapsulation technology using alginate (ALG) and chitosan (CS) as wall materials. The different ratio of ALG to PHLC-Ca on microcapsules encapsulation efficiency (EE) and loading capacity (LC) was evaluated and 1:1/2 was selected as the optimal proportion. The microcapsules were micron-sized and spherical in shape. PHLC-Ca was successfully entrapped into the matrix of ALG through forming intermolecular hydrogen bonding or other interactions. The confocal laser scanning microscopy (CLSM) indicated that CS was coated on ALG microspheres. The MTT assay exhibited that CS/ALG-(PHLC-Ca) microcapsules extracts were safe to L929. The animal experiment showed that CS/ALG-(PHLC-Ca) microcapsules was superior to treating osteoporosis than PHLC-Ca. These results illustrated that the bioavailability of PHLC-Ca was improved by microencapsulated.

Analysis of the pH-Dependent Fe(III) Ion Chelating Activity of Anthocyanin Extracted from Black Soybean [Glycine max (L.) Merr.] Coats

The Fe(III) chelating activity of anthocyanin extracted from black soybean coats was investigated at pH 3.0, 5.0, 6.5, 7.0, and 7.4 with fluorescence spectroscopy and microscale thermophoresis (MST). Cyanidin-3-glucoside (C3G) was determined to be 98% of the total anthocyanin by high-performance liquid chromatography. The binding affinity (Ka) exhibited significant pH-dependent behavior: Ka was 9.7167 × 104, 1.0837 × 104, 1.4284 × 104, 5.4550 × 104, and 3.0269 × 104 M-1 at pH 3.0, 5.0, 6.5, 7.0, and 7.4, respectively (p < 0.05). The MST data showed that ΔG < 0 and ΔH < 0, demonstrating that chelation is spontaneous and exothermic. Because both ΔH and ΔS < 0, the chelation involves hydrogen bonds and/or van der Waals forces for pH 3.0, 5.0, and 6.5. Electrostatic interactions contributed to chelation at pH 7.0 and 7.4 with ΔH < 0 and ΔS > 0. With the formation of chelates, C3G improved the solubility of Fe(III) at pH 6.5, 7.0, and 7.4 to enhance the ferric ion bioavailability, except for aggregation observed at pH 5.0.

Synthesis of whey peptide-iron complexes: Influence of using different iron precursor compounds

Iron-binding peptides are an alternative for increasing the bioavailability of iron and to decreasing its pro-oxidant effect. This study aimed to synthesize and characterize peptide-iron complexes using FeCl₂ or FeSO₄ as the iron precursor compounds. Whey protein isolate (WPI), WPI hydrolyzed with pancreatin, and its fractions obtained via ultrafiltration (cut-off 5kDa) were used as ligands. The fluorescence intensity of the ligands significantly decreased as the iron concentration increased as a result of metal coordination with the iron-binding sites, which may have led to changes in the microenvironment of tryptophan. For both iron precursor compounds, the primary iron-binding site was carboxylate groups, and the linkage occurred via a bidentate coordination mode with two vibrational modes assigned to the COOFe linkage. However, infrared spectroscopy and thermal analysis results showed that the dynamics of the interaction is different for the iron precursor. The iron source may be of great importance because it may impact iron absorption and the pro-oxidant effect of the mineral.

Effects of Protein-Iron Complex Concentrate Supplementation on Iron Metabolism, Oxidative and Immune Status in Preweaning Calves

The objective of this study was to determine the effects of feeding protein-iron complex (PIC) on productive performance and indicators of iron metabolism, hematology parameters, antioxidant and immune status during first 35 days of a calf’s life. Preparation of the complex involved enzymatic hydrolysis of milk casein (serine protease from Yarrowia lipolytica yeast). Iron chloride was then added to the hydrolyzate and lyophilizate. Calves were divided into treated groups: LFe (low iron dose) 10 g/day calf of protein-iron complex, HFe (height iron dose) 20 g/day calf, and control group. Dietary supplements containing the lower dose of concentrate had a significant positive effect on iron metabolism, while the higher dose of concentrate resulted in increase of total iron binding capacity (TIBC), saturation of transferrin and decrease of and unsaturated iron binding capacity (UIBC), which suggest iron overload. Additionally, treatment with the lower dose of iron remarkably increased the antioxidant parameters, mainly total antioxidant (TAS) and glutathione peroxidase activity (GPx). Higher doses of PIC were related to lower total antioxidant status. IgG, IgM, insulin, glucose, TNFα and IGF-1 concentration did not change significantly in either group after supplementation. In practice, the use of protein-iron complex concentrate requires taking into account the iron content in milk replacers and other feedstuffs.

The adsorption of orthophosphate onto casein-iron precipitates

This study explored the interactions of orthophosphate with casein-iron precipitates. Casein-iron precipitates were formed by adding ferric chloride at ≥10mM to sodium caseinate solutions ranging in concentration from 1 to 3%(w/v). The addition of different concentrations of orthophosphate solution to the casein-iron precipitates resulted in gradual adsorption of the orthophosphate, causing re-dispersion of the casein-iron complexes. The interactions of added orthophosphate with iron in the presence and absence of caseins are postulated, and new mechanisms are proposed. The re-dispersed soluble complexes of casein-iron-orthophosphate generated using this process could be used as novel iron fortificants.

Short communication: Identification of iron-binding peptides from whey protein hydrolysates using iron (III)-immobilized metal ion affinity chromatography and reversed phase-HPLC-tandem mass spectrometry

Peptides with iron-binding capacity obtained by hydrolysis of whey protein with Alcalase (Novozymes, Araucaria, PR, Brazil), pancreatin, and Flavourzyme (Novozymes) were identified. Hydrolysates were subjected to iron (III)-immobilized metal ion affinity chromatography, and the bound peptides were sequenced by mass spectrometry. Regardless of the enzyme used, the domains f(42-59) and f(125-137) from β-lactoglobulin enclosed most of identified peptides. This trend was less pronounced in the case of peptides derived from α-lactalbumin, with sequences deriving from diverse regions. Iron-bound peptides exhibited common structural characteristics, such as an abundance of Asp, Glu, and Pro, as revealed by mass spectrometry and AA analysis. In conclusion, this characterization of iron-binding peptides helps clarify the relationship between peptide structure and iron-chelating activity and supports the promising role of whey protein hydrolysates as functional ingredients in iron supplementation treatments.

Impact of Lipid and Protein Co-oxidation on Digestibility of Dairy Proteins in Oil-in-Water (O/W) Emulsions

Enrichment of polyunsaturated fatty acids (PUFAs) is a growing trend in the food industry. However, PUFAs are known to be susceptible to lipid oxidation. It has been shown that oxidizing lipids react with proteins present in the food and that as a result polymeric protein complexes are produced. Therefore, the aim of this work was to investigate the impact of lipid and protein co-oxidation on protein digestibility. Casein and whey protein (6 mg/mL) based emulsions with 1% oil with different levels of PUFAs were subjected to respectively autoxidation and photo-oxidation. Upon autoxidation at 70 °C, protein digestibility of whey protein based emulsions containing fish oil decreased to 47.7 ± 0.8% after 48 h, whereas in the controls without oil 67.8 ± 0.7% was observed. Upon photo-oxidation at 4 °C during 30 days, mainly casein-based emulsions containing fish oil were affected: the digestibility amounted to 43.9 ± 1.2%, whereas in the control casein solutions without oil, 72.6 ± 0.2% of the proteins were digestible. Emulsions containing oils with high PUFA levels were more prone to lipid oxidation and thus upon progressive oxidation showed a higher impact on protein digestibility.