Application of response surface methodology to optimise extraction of flavonoids from fructus sophorae

A comprehensive review on fructosyl peptide oxidase as an important enzyme for present hemoglobin A1c assays

Glycated proteins are generated by binding of glucose to the proteins in blood stream through a nonenzymatic reaction. Hemoglobin A1c (HbA1c) is a glycated protein with glucose at the N-terminal of β-chain. HbA1c is extensively used as an indicator for assessing the blood glucose concentration in diabetes patients. There are different conventional clinical methods for the detection of HbA1c. However, enzymatic detection method has newly obtained great attention for its high precision and cost-effectiveness. Today, fructosyl peptide oxidase (FPOX) plays a key role in the enzymatic measurement of HbA1c, and different companies have marketed HbA1c assay systems based on FPOX. Recent investigations show that FPOX could be used in assaying HbA1 without requiring HbA1c primary digestion. It could also be applied as a biosensor for HbA1c detection. In this review, we have discussed the recent improvements of FPOX properties, different methods of FPOX purification, solubility, and immobilization, and also the use of FPOX in HbA1c biosensors.

Metabolic profiling and antibacterial activity of tree wood extracts obtained under variable extraction conditions

INTRODUCTION

Tree bacterial diseases are a threat in forestry due to their increasing incidence and severity. Understanding tree defence mechanisms requires evaluating metabolic changes arising during infection. Metabolite extraction affects the chemical diversity of the samples and, therefore, the biological relevance of the data. Metabolite extraction has been standardized for several biological models. However, little information is available regarding how it influences wood extract's chemical diversity.

OBJECTIVES

This study aimed to develop a methodological approach to obtain extracts from different tree species with the highest reproducibility and chemical diversity possible, to ensure proper coverage of the trees' metabolome.

METHODS

A full factorial design was used to evaluate the effect of solvent type, extraction temperature and number of extraction cycles on the metabolic profile, chemical diversity and antibacterial activity of four tree species.

RESULTS

Solvent, temperature and their interaction significantly affected the extracts' chemical diversity, while the number of extraction cycles positively correlated with yield and antibacterial activity. Although 60% of the features were recovered in all the tested conditions, differences in the presence and abundance of specific chemical classes per tree were observed, including organooxygen compounds, prenol lipids, carboxylic acids, and flavonoids.

CONCLUSIONS

Each tree species has a unique metabolic profile, which means that no single protocol is universally effective. Extraction at 50 °C for three cycles using 80% methanol or chloroform/methanol/water showed the best results and is suggested for studying wood metabolome. These observations highlight the need to tailor extraction protocols to each tree species to ensure comprehensive metabolome coverage for metabolic profiling.

Cloning and Expression Analysis of Key Enzyme Gene CoGPPS Involved in Iridoid Glycoside Synthesis in Cornus officinalis

Cornus iridoid glycosides (CIGs), including loganin and morroniside, are the main active components of Cornus officinalis. As one of the key enzymes in the biosynthesis of CIGs, geranyl pyrophosphate synthase (GPPS) catalyzes the formation of geranyl pyrophosphate, which is the direct precursor of CIGs. In this study, the C. officinalis geranyl pyrophosphate synthase (CoGPPS) sequence was cloned from C. officinalis and analyzed. The cDNA sequence of the CoGPPS gene was 915 bp (GenBank No. OR725699). Phylogenetic analysis showed that CoGPPS was closely related to the GPPS sequence of Actinidia chinensis and Camellia sinensis, but relatively distantly related to Paeonia lactiflora and Tripterygium wilfordii. Results from the quantitative real-time PCR showed the spatiotemporal expression pattern of CoGPPS; that is, CoGPPS was specifically expressed in the fruits. Subcellular localization assay proved that CoGPPS was specifically found in chloroplasts. Loganin and morroniside contents in the tissues were detected by high-performance liquid chromatography, and both compounds were found to be at higher levels in the fruits than in leaves. Thus, this study laid the foundation for further studies on the synthetic pathway of CIGs.

Ultrasound-assisted extraction and analysis of maidenhairtree polysaccharides

The maidenhairtree polysaccharides (MTPs) have important application prospects. So, the extraction, purification, structure, derivatization and biological activities of polysaccharides from leaves, fruits, and testae of maidenhairtree were disscussed. Polysaccharides were extracted by collaborative extraction methods such as ultrasound-assisted extraction and microwave-assisted extraction. The ultrasound-assisted extraction had higher content and higher efficiency. The structural characteristics and structure-activity relationship of maidenhairtree polysaccharides were studied in order to provide theoretical basis and technical support for the further development and utilization of maidenhairtree polysaccharides.

Optimization of Extraction Process of Polysaccharides MAP-2 from Opuntia Milpa Alta by Response Surface Methodology and Evaluation of Its Potential as α-Glucosidase Inhibitor

The α-glucosidase inhibitors play an important role in blood glucose control in patients with type 2 diabetes. At present, the development of new α-glucosidase inhibitors is an urgent clinical need. Our previous studies have found that the polysaccharide MAP-2 in the cactus Opuntia Milpa Alta has significantly better activity than acarbose (one of the most widely used first-line α-glucosidase inhibitors in clinical practice), but its optimal extraction process parameters and inhibition kinetic characteristics are not clear, and whether it has the potential to become a new α-glucosidase inhibitors is also unclear. In this study, based on previous research, we used the combination of single factor experiments and the response surface method (RSM) to identify the optimal extraction conditions for MAP-2 as follows: solid-liquid ratio 1:4, extraction temperature 90 °C, extraction time 1 h. Under these conditions, the extraction yield of MAP-2 was 3.47 ± 0.062%. When the concentration of MAP-2 was 16 mg/mL, the inhibition rate of α-glucosidase was 91.13 ± 0.62%. In addition, the results of inhibition kinetics showed that the inhibition rate of MAP-2 on α-glucosidase was the highest at pH 7.4 for 30 min, and showed a good dose-effect relationship, which was a reversible competitive inhibition. Meanwhile, we also compared the activities of MAP-2 and acarbose on the side effects of acarbose related enzymes. Compared with acarbose, MAP-2 not only had a better activation effect on lactase, but also inhibited the activity of hyaluronidase, and the activation and inhibition rate were positively correlated with the concentration. However, under the same conditions, the effect of acarbose on hyaluronidase was opposite to that of MAP-2. At low concentration, acarbose had a certain activation effect on lactase, but gradually attained an inhibitory effect with the increase in concentration. In contrast, MAP-2 not only activates lactase activity, improves diarrhea, abdominal distension, and abdominal pain, but also inhibits hyaluronidase activity, to solve the side effects of allergic reactions, suggesting that MAP-2 has the potential to become a novel and effective inhibitor of α-glucosidase with fewer side effects.

Response surface methodology-optimized extraction of flavonoids with antioxidant and antimicrobial activities from the exocarp of three genera of coconut and characterization by HPLC-IT-TOF-MS/MS

Response surface methodology optimization based on central composite design was applied to extract flavonoids from the exocarp of three coconut genera. The antioxidant and antimicrobial activities and structures of the flavonoids were determined. The results indicated that the optimal extraction conditions were ethanol concentration, 60%; temperature, 50 ℃; time, 90 min; liquid/material ratio, 40 mL/g; ultrasonic power, 150 W. Under these conditions, the yields of green, red and yellow coconut exocarp were 366.03 ± 7.57, 596.38 ± 10.32, and 403.78 ± 5.56 mg rutin/g powder, respectively. The flavonoids exhibited eminent DPPH and ABTS radical scavenging activities with IC₅₀ values of 0.01-0.02 mg/mL. At a concentration of 2 mg/mL, they exhibited antimicrobial activity against Vibrio parahaemolyticus, Listeria monocytogenes, Escherichia coli, Staphylococcus aureus, Salmonella and Pseudomonas aeruginosa. In total, 17 flavonoids and 5 phenolic acids were characterized by UPLC-IT-TOF-MS/MS; among them, catechin, kaempferol, and quercetin were abundant. Yellow coconut had a distinct flavonoid spectrogram from other genera and contained more methoxy flavonoids.

Antioxidants from Hyeronima macrocarpa Berries Loaded on Nanocellulose: Thermal and Antioxidant Stability

This study investigated the effect of different storage temperatures (35-55 °C) on the bioactive substances and antioxidant properties of Hyeronima macrocarpa berries loaded on nanocellulose. NC was extracted from banana pseudo-stems and presented an interesting surface and porosity properties. The acidified ethanol extract showed better anthocyanin extraction (1317 mg C3G eq./100 g FW) and was used for the preparation of the powdered product, which presented an intense and uniform magenta color, with CIELAB parameters of L* = 59.16, a* = 35.61, and b* = 7.08. The powder exhibited significant stability at storage temperatures of 35 and 45 °C, in which there was no significant loss of anthocyanins or a decrease in antioxidant capacity. In addition, the color was stable for up to 4 months without adding any preservative agent. The anthocyanin-rich extract of H. macrocarpa reached an estimated shelf-life of 315 days (stored at 35 °C), as a result of the impregnation process between the extract and NC, with the ability to protect the bioactives from degradation, due to NC surface properties.

Optimization of Sporulation Conditions for Bacillus subtilis BSNK-5

Bacillus subtilis spores have important biological applications; however, high spore-cell densities and sporulation efficiencies in fermentation is poorly reported. This study systematically analyzed the spore densities and formation efficiency of B. subtilis BSNK-5 in different culture substrates. A response surface regression equation was established based on the results of single factor and Box–Behnken experimental designs. The optimal medium formulation, as predicted from the equation, consisted of soluble starch at 3 g·L−1, soybean flour at 12 g·L−1, and MgSO4 at 5 g·L−1. The spore yield reached 2.43 × 109 CFU·mL−1, and the sporulation rate was 83.3%, which was nearly three times higher than before optimization using an optimized medium at 36 °C and 200 rpm for 60 h.

In situ net fishing of α-glucosidase inhibitors from evening primrose (Oenothera biennis) defatted seeds by combination of LC-MS/MS, molecular networking, affinity-based ultrafiltration, and molecular docking

Defatted seeds of evening primrose (DSEP), the by-product of evening primrose oil manufacture, exhibit potential α-glucosidase inhibitory activity; however, presently they are routinely discarded as waste. In this study, an in situ net fishing strategy was proposed for rapid recognition of α-glucosidase inhibitors from DSEP. Firstly, the DSEP extraction method was optimized employing a response surface methodology for the recovery of α-glucosidase inhibitors, just like "finding a good fishery before net fishing". Then, molecular networks of DSEP were generated by GNPS-based molecular networking after LC-MS/MS analysis, just like "casting tight nets in the fishery". Subsequently, affinity-based ultrafiltration was carried out for fishing the "hit" together with its structural analogues according to the molecular networks, just like "hauling the specific net fishing". Finally, molecular docking analysis was performed to rapidly verify α-glucosidase inhibitory activities of the potential bioactive components and predict their inhibition mechanisms. In the results, DSEP displayed significant inhibitory effects against yeast and rat intestinal α-glucosidase, and the results of an oral starch tolerance test suggested that DSEP showed postprandial blood-glucose-lowering activity. Moreover, 1-galloyl-glucose, gallic acid, methyl gallate, 1,6-digalloyl-β-D-glucose, and 1,3,6-trigalloylglucose were rapidly identified as potential α-glucosidase inhibitors present in DSEP.

Treatment and high value utilization of glutamic acid wastewater

Glutamate wastewater has a high yield in the world and is difficult to be treated due to its high acidity, high COD (chemical oxygen demand, reflecting the pollution degree of reduced substances in the water) and high ammonia nitrogen characteristics. In this study, Bacillus licheniformis M 2020051 was used to treat organic wastewater to ferment polyglutamic acid, which reduced the pollution of industrial wastewater and produced polyglutamic acid at a low cost. Firstly, a strain with high salt tolerance and high polyglutamic acid production was isolated from saline soil, and the mechanism of salt tolerance and polyglutamic acid production were also analyzed. Then Single-factor experiment and Response surface methodology (RSM) were used to determine the appropriate fermentation conditions to achieve maximum γ-polyglutamic acid production. After optimization, the yield of polyglutamic acid was increased to 6.91 g·L^-1 by shaking fermentation, an increase of 7.13%. Finally, the agronomic experiments were carried out, and the results showed that γ-polyglutamic acid could significantly increase the germination rate of corn seeds and the growth of rapeseed. These studies will lay the foundation for reducing industrial wastewater pollution and exploring the production model of γ-polyglutamic acid.

Response Surface Methodology (RSM)-Based Optimization of Ultrasound-Assisted Extraction of Sennoside A, Sennoside B, Aloe-Emodin, Emodin, and Chrysophanol from Senna alexandrina (Aerial Parts): HPLC-UV and Antioxidant Analysis

In this study, ultrasound-assisted extraction conditions were optimized to maximize the yields of sennoside A, sennoside B, aloe-emodin, emodin, and chrysophanol from S. alexandrina (aerial parts). The three UAE factors, extraction temperature (S₁), extraction time (S₂), and liquid to solid ratio (S₃), were optimized using response surface methodology (RSM). A Box–Behnken design was used for experimental design and phytoconstituent analysis was performed using high-performance liquid chromatography-UV. The optimal extraction conditions were found to be a 64.2 °C extraction temperature, 52.1 min extraction time, and 25.2 mL/g liquid to solid ratio. The experimental values of sennoside A, sennoside B, aloe-emodin, emodin, and chrysophanol (2.237, 12.792, 2.457, 0.261, and 1.529%, respectively) agreed with those predicted (2.152, 12.031, 2.331, 0.214, and 1.411%, respectively) by RSM models, thus demonstrating the appropriateness of the model used and the accomplishment of RSM in optimizing the extraction conditions. Excellent antioxidant properties were exhibited by S. alexandrina methanol extract obtained using the optimized extraction conditions with a DPPH assay (IC50 = 59.7 ± 1.93, µg/mL) and ABTS method (47.2 ± 1.40, µg/mL) compared to standard ascorbic acid.

Statistical Optimization of Flavonoid and Antioxidant Recovery from Macerated Chinese and Malaysian Lotus Root (Nelumbo nucifera) Using Response Surface Methodology

In this study, the combination of parameters required for optimal extraction of anti-oxidative components from the Chinese lotus (CLR) and Malaysian lotus (MLR) roots were carefully investigated. Box–Behnken design was employed to optimize the pH (X₁: 2–3), extraction time (X₂: 0.5–1.5 h) and solvent-to-sample ratio (X₃: 20–40 mL/g) to obtain a high flavonoid yield with high % DPPH_sc free radical scavenging and Ferric-reducing power assay (FRAP). The analysis of variance clearly showed the significant contribution of quadratic model for all responses. The optimal conditions for both Chinese lotus (CLR) and Malaysian lotus (MLR) roots were obtained as: CLR: X₁ = 2.5; X₂ = 0.5 h; X₃ = 40 mL/g; MLR: X₁ = 2.4; X₂ = 0.5 h; X₃ = 40 mL/g. These optimum conditions gave (a) Total flavonoid content (TFC) of 0.599 mg PCE/g sample and 0.549 mg PCE/g sample, respectively; (b) % DPPH_sc of 48.36% and 29.11%, respectively; (c) FRAP value of 2.07 mM FeSO₄ and 1.89 mM FeSO₄, respectively. A close agreement between predicted and experimental values was found. The result obtained succinctly revealed that the Chinese lotus exhibited higher antioxidant and total flavonoid content when compared with the Malaysia lotus root at optimum extraction condition.

Optimizing the acceleration of Cheddar cheese ripening using response surface methodology by microbial protease without altering its quality features

Cheddar cheese proteolysis were accelerated employing Penicillium candidum PCA1/TT031 protease into cheese curd. In the present study, several of the significant factors such as protease purification factor (PF), protease concentration and ripening time were optimized via the response surface methodology (RSM). The ideal accelerated Cheddar cheese environment consisted of 3.12 PF, 0.01% (v/v) protease concentration and 0.6/3 months ripening time at 10 °C. The RSM models was verified to be the most proper methodology for the maintain of chosen Cheddar cheese. Under this experimental environment, the pH, acid degree value (ADV), moisture, water activity (a_w), soluble nitrogen (SN)%, fat and overall acceptability were found to be 5.4, 6.6, 35%, 0.9348, 18.8%, 34% and 13.6, respectively of ideal Cheddar cheese. Furthermore, the predicted and experimental results were in significant agreement, which confirmed the validity and reliability of the suggested method. In spite of the difference between the ideal and commercial Cheddar cheese in the concentration of some of amino acids and free fatty acids, the sensory evaluation did not show any significant difference in aroma profile between them.

Partitioning of Recombinant Pseudomonas putida POS-F84 Proline Dehydrogenase in Aqueous Two-Phase Systems: Optimization Using Response Surface Methodology

Empirical modeling the partition behavior and recovery of a recombinant Pseudomonas putida POS-F84 proline dehydrogenase (ProDH) in aqueous two-phase systems (ATPS) was carried out by response surface methodology (RSM). Polyethylene glycol 1000 (PEG-1000) concentration, sodium carbonate concentration, and pH, which were the most important factors, were chosen for modeling the partition feature of enzyme. The adequacy of the models was investigated by means of variance analysis. Also, to confirm the efficiency of the ATPS in partition and purification of recombinant ProDH, purity and enzymatic activity was studied. After numerical optimization, an optimal ATPS composed of 14.33% PEG-1000 and 11.79% sodium carbonate at pH 7.48 was achieved. Yield, purification factor, and recovery were 81.41%, 60.82, and 270.82%, respectively. Purified recombinant ProDH was found as a single protein band into the upper PEG-rich phase and the specific activity was calculated to be 46.23 ± 2.1 U/mg. Collectively, our data showed that the RSM could be an appropriate and powerful tool to define the best ATPS system for recovery and purification of P. putida ProDH.

Multiresponse Optimization of Ultrasonic-Assisted Extraction for Aurantii Fructus to Obtain High Yield of Antioxidant Flavonoids Using a Response Surface Methodology

Aurantii fructus (zhiqiao, ZQ) is a traditional Chinese medicine (TCM) and raw material of TCM healthcare food (TCM-HF), mainly focused on the regulation of gastrointestinal disorders and the abundant application of antioxidants. Pharmacological investigations of ZQ flavonoids have identified them as the main bioactive components in recent years, but little has been reported on the extraction processes of antioxidant flavonoids (AFs). The aim of this study was to establish an efficient ultrasonic-assisted extraction (UAE) method for the extraction of AFs from ZQ using a response surface methodology (RSM), analyze the composition of AFs, and develop a qualitative evaluation method for ZQ. Flavonoid yield and antioxidant ability were selected as the responses to optimize the extraction of AFs, and the multiple effects of independent variables were investigated. The optimized conditions for the extraction of AFs based on the Box-Behnken design (BBD) were as follows: ethanol concentration, 58%; extraction temperature, 70 °C; and extraction time, 17 min. The flavonoid yield and antioxidant activity reached 241.70 mg/g and 59.42%, respectively, which matched the predicted values. Furthermore, optimized UAE processes were first established for the efficient and fast extraction of AFs. Flavanones and polymethoxyflavonoids (PMFs) were identified as potential AFs using time-of-flight mass spectrometry. Meanwhile, the quality of ZQ was evaluated using the criteria importance through intercriteria correlation (CRITIC) method for the first time, and Yuanjiang ZQ was considered as an excellent raw material of TCM-HF.

Optimization of Flavonoid Extraction from Red and Brown Rice Bran and Evaluation of the Antioxidant Properties

Recently, the quality-by-design concept has been widely implemented in the optimization of pharmaceutical processes to improve batch-to-batch consistency. As flavonoid compounds in pigmented rice bran may provide natural antioxidants, extraction of flavonoid components from red and brown rice bran was optimized using central composite design (CCD) and response surface methodology (RSM). Among the solvents tested, ethanol was most efficient for extracting flavonoids from rice bran. The examined parameters were temperature, solvent percentage, extraction time, and solvent-to-solid ratio. The highest total flavonoid content (TFC) in red rice bran was predicted as 958.14 mg quercetin equivalents (QE)/100 g dry matter (DM) at 58.5 °C, 71.5% (v/v), 36.2 min, and 7.94 mL/g, respectively, whereas the highest TFC in brown rice bran was predicted as 782.52 mg QE/100 g DM at 56.7 °C, 74.4% (v/v), 36.9 min, and 7.18 mL/g, respectively. Verification experiment results under these optimized conditions showed that the TFC values for red and brown rice bran were 962.38 and 788.21 mg QE/100 g DM, respectively. No significant differences were observed between the predicted and experimental TFC values, indicating that the developed models are accurate. Analysis of the extracts showed that apigenin and p-coumaric acid are abundant in red and brown rice bran. Further, red rice bran with its higher flavonoid content exhibited higher nitric oxide and 2,2-diphenyl-1-picrylhydrazyl scavenging activities (EC₅₀ values of 41.3 and 33.6 μg/mL, respectively) than brown rice bran. In this study, an extraction process for flavonoid compounds from red and brown rice bran was successfully optimized. The accuracy of the developed models indicated that the approach is applicable to larger-scale extraction processes.

Optimization of ultrasound-assisted extraction of glycyrrhizic acid from licorice using response surface methodology

BACKGROUND

The present study optimized ultrasound-assisted extraction conditions to maximize extraction yields of glycyrrhizic acid from licorice.

METHODS

The optimal extraction temperature (X1), extraction time (X2), and methanol concentration (X3) were identified using response surface methodology (RSM). A central composite design (CCD) was used for experimental design and analysis of the results to obtain the optimal processing parameters.

RESULTS

Statistical analyses revealed that three variables and the quadratic of X1, X2, and X3 had significant effects on the yields and were followed by significant interaction effects between the variables of X2 and X3 (p < 0.01). A 3D response surface plot and contour plots derived from the mathematical models were applied to determine the optimal conditions. The optimum ultrasound-assisted extraction conditions were as follows: extraction temperature, 69 °C; extraction time, 34 min; and methanol concentration, 57%. Under these conditions, the experimental yield of glycyrrhizic acid was 3.414%, which agreed closely with the predicted value (3.406%).

CONCLUSION

The experimental values agreed with those predicted by RSM models, thus indicating the suitability of the model employed and the success of RSM in optimizing the extraction conditions.

Variation of loganin content in Cornus officinalis fruits at different extraction conditions and maturation stages

Efficient preparation of loganin from Cornus officinalis fruits was investigated. First, effect of extraction conditions on loganin yield was measured. The loganin content in C. officinalis extract was greatly affected by ethanol concentration and extraction time whereas extraction temperature exerted relatively little effect. Response surface methodology with Box-Behnken design suggested optimized extraction condition for maximum loganin yield as ethanol concentration, 32.0%; temperature 46.2 °C and extraction time, 46.7 min, which yielded 10.4 μg loganin/mg dried fruit. Next, the effect of maturation stage of C. officinalis fruits on loganin content was investigated. The loganin content in the extract of C. officinalis fruits was decreased as the maturation process. The loganin content in the unripe fruits was 18.0 μg/mg extract whereas reduced to 13.3 μg/mg extract for ripe fruits. Taken together, our present study suggested the importance of extraction condition and maturation stages for efficient preparation of loganin from C. officinalis fruits.

Response Surface Methodology Modelling of an Aqueous Two-Phase System for Purification of Protease from Penicillium candidum (PCA 1/TT031) under Solid State Fermentation and Its Biochemical Characterization

Penicillium candidum (PCA 1/TT031) synthesizes different types of extracellular proteases. The objective of this study is to optimize polyethylene glycol (PEG)/citrate based on an aqueous two-phase system (ATPS) and Response Surface Methodology (RSM) to purify protease from Penicillium candidum (PCA 1/TT031). The effects of different PEG molecular weights (1500-10,000 g/mol), PEG concentration (9%-20%), concentrations of NaCl (0%-10%) and the citrate buffer (8%-16%) on protease were also studied. The best protease purification could be achieved under the conditions of 9.0% (w/w) PEG 8000, 5.2% NaCl, and 15.9% sodium citrate concentration, which resulted in a one-sided protease partitioning for the bottom phase with a partition coefficient of 0.2, a 6.8-fold protease purification factor, and a yield of 93%. The response surface models displayed a significant (p ≤ 0.05) response which was fit for the variables that were studied as well as a high coefficient of determination (R²). Similarly, the predicted and observed values displayed no significant (p > 0.05) differences. In addition, our enzyme characterization study revealed that Penicillium candidum (PCA 1/TT031) produced a slight neutral protease with a molecular weight between 100 and 140 kDa. The optimal activity of the purified enzyme occurred at a pH of 6.0 and at a temperature of 50 °C. The stability between different pH and temperature ranges along with the effect of chemical metal ions and inhibitors were also studied. Our results reveal that the purified enzyme could be used in the dairy industry such as in accelerated cheese ripening.

Optimization of Supercritical Fluid Extraction of Total Alkaloids, Peimisine, Peimine and Peiminine from the Bulb of Fritillaria thunbergii Miq, and Evaluation of Antioxidant Activities of the Extracts

Supercritical fluid extraction (SFE) was used to extract total alkaloids, peimisine, peimine and peiminine from the bulb of Fritillaria thunbergii Miq. The antioxidant capacity of the extracts was evaluated by DPPH radical scavenging activity (DPPH-RSA), ABTS radical scavenging activity (ABTS-RSA) and ferric reducing capacity (FRAP) assay. A central composite design (CCD) with four variables and five levels was employed for optimization of process parameters, and response surface plots were constructed in accordance with a second order polynomial model. Under optimal conditions of 3.0 h, 60.4 °C, 26.5 MPa and 89.3% ethanol, the highest yields were predicted to be 3.8 mg/g for total alkaloids, 0.5 mg/g for peimisine, 1.3 mg/g for peimine and 1.3 mg/g for peiminine, and the antioxidant capacity of extracts displayed EC_{50, DPPH} value of 5.5 mg/mL, EC_{50, ABTS} value of 0.3 mg/mL and FRAP value of 118.2 mg ascorbic acid equivalent (AAE)/100 g.

Optimization and in vitro antiproliferation of Curcuma wenyujin's active extracts by ultrasonication and response surface methodology

Background

Curcuma wenyujin, a member of the genus Curcuma, has been widely prescribed for anti-cancer therapy. Multiple response surface optimization has attracted a great attention, while, the research about optimizing three or more responses employing response surface methodology (RSM) was very few.

Results

RSM and desirability function (DF) were employed to get the optimum ultrasonic extraction parameters, in which the extraction yields of curdione, furanodienone, curcumol and germacrone from C. wenyujin were maximum. The yields in the extract were accurately quantified using the validated high performance liquid chromatography method with a good precision and accuracy. The optimization results indicated that the maximum combined desirability 97.1 % was achieved at conditions as follows: liquid–solid ratio, 8 mL g⁻¹; ethanol concentration, 70 % and ultrasonic time, 20 min. The extraction yields gained from three verification experiments were in fine agreement with those of the model’s predictions. The surface morphologies of the sonication-treated C. wenyujin were loose and rough. The extract of C. wenyujin presented obvious antiproliferative activities against RKO and HT-29 cells in vitro.

Conclusion

Response surface methodology was successfully applied to model and optimize the ultrasonic extraction of four bioactive components from C. wenyujin for antiproliferative activitiy.Graphical abstract

Polysaccharide extraction from Sphallerocarpus gracilis roots by response surface methodology

The extraction process of Sphallerocarpus gracilis root polysaccharides (SGRP) was optimized using response surface methodology with two methods [hot-water extraction (HWE) and ultrasonic-assisted extraction (UAE)]. The antioxidant activities of SGRP were determined, and the structural features of the untreated materials (HWE residue and UAE residue) and the extracted polysaccharides were compared by scanning electron microscopy. Results showed that the optimal UAE conditions were extraction temperature of 81°C, extraction time of 1.7h, liquid-solid ratio of 17ml/g, ultrasonic power of 300W and three extraction cycles. The optimal HWE conditions were 93°C extraction temperature, 3.6h extraction time, 21ml/g liquid-solid ratio and three extraction cycles. UAE offered a higher extraction yield with a shorter time, lower temperature and a lower solvent consumption compared with HWE, and the extracted polysaccharides possessed a higher antioxidant capacity. Therefore, UAE could be used as an alternative to conventional HWE for SGRP extraction.

Antiproliferative activity of Curcuma phaeocaulis Valeton extract using ultrasonic assistance and response surface methodology

The objective of the study was to optimize the ultrasonic-assisted extraction of curdione, furanodienone, curcumol, and germacrone from Curcuma phaeocaulis Valeton (Val.) and investigate the antiproliferative activity of the extract. Under the suitable high-performance liquid chromatography condition, the calibration curves for these four tested compounds showed high levels of linearity and the recoveries of these four compounds were between 97.9 and 104.3%. Response surface methodology (RSM) combining central composite design and desirability function (DF) was used to define optimal extraction parameters. The results of RSM and DF revealed that the optimum conditions were obtained as 8 mL g^-1 for liquid-solid ratio, 70% ethanol concentration, and 20 min of ultrasonic time. It was found that the surface structures of the sonicated herbal materials were fluffy and irregular. The C. phaeocaulis Val. extract significantly inhibited the proliferation of RKO and HT-29 cells in vitro. The results reveal that the RSM can be effectively used for optimizing the ultrasonic-assisted extraction of bioactive components from C. phaeocaulis Val. for antiproliferative activity.

Seasonal variation and gender pattern of phenolic and flavonoid contents in Pistacia chinensis Bunge inflorescences and leaves

Pistacia chinensis Bunge (P. chinensis) is a deciduous and dioecious perennial arbor of the family Anacardiaceae that flowers from March to April and bears fruit from September to October. There are three rapidly growing stages in the annual growth process of P. chinensis. However, the knowledge of the secondary metabolites related to P. chinensis gender and growth season remains scant. In this study, HPLC was used to qualitatively and quantitatively determine the content of the catechin hydrate, rutin, quercetin, and kaempferol contents in male and female tree inflorescences and leaves. Total phenolics and flavonoids were also detected using a spectrophotometer. The results indicated that the contents of these compounds fluctuated with seasons and they reached the highest levels in nascent leaves. The fluctuations of these compounds followed different pathways of evolution, by increasing or decreasing in male and female trees throughout the whole growth process because they had their own biological functions. Moreover, the extracts exhibited DPPH radical scavenging bioactivity and showed no significant cytotoxicity towards 3T3-L1 preadipocytes. Together, these results demonstrated that P. chinensis has great potential as an antioxidant medicine, and the best harvest time is in the spring.

Optimization of Extraction Condition of Bee Pollen Using Response Surface Methodology: Correlation between Anti-Melanogenesis, Antioxidant Activity, and Phenolic Content

Bee pollen is flower pollen with nectar and salivary substances of bees and rich in essential components. Bee pollen showed antioxidant and tyrosinase inhibitory activity in our assay system. To maximize the antioxidant and tyrosinase inhibitory activity of bee pollen, extraction conditions, such as extraction solvent, extraction time, and extraction temperature, were optimized using response surface methodology. Regression analysis showed a good fit of this model and yielded the second-order polynomial regression for tyrosinase inhibition and antioxidant activity. Among the extraction variables, extraction solvent greatly affected the activity. The optimal condition was determined as EtOAc concentration in MeOH, 69.6%; temperature, 10.0 °C; and extraction time, 24.2 h, and the tyrosinase inhibitory and antioxidant activity under optimal condition were found to be 57.9% and 49.3%, respectively. Further analysis showed the close correlation between activities and phenolic content, which suggested phenolic compounds are active constituents of bee pollen for tyrosinase inhibition and antioxidant activity. Taken together, these results provide useful information about bee pollen as cosmetic therapeutics to reduce oxidative stress and hyperpigmentation.