Comparison of near and medium infrared spectroscopy to predict fatty acid composition on fresh and thawed milk

A Portable Infrared Attenuated Total Reflection Spectrometer for Food Analysis

The analytical performance of a compact infrared attenuated total reflection spectrometer using a pyroelectric detector array has been evaluated and compared to a conventional laboratory Fourier transform infrared system for applications in food analysis. Analytical characteristics including sensitivity, repeatability, linearity of the calibration functions, signal-to-noise ratio, and spectral resolution have been derived for both approaches. Representative analytes of relevance in food industries (i.e., organic solvents, fatty acids, and mycotoxins) have been used for the assessment of the performance of the device and to discuss the potential of this technology in food and feed analysis.

Discrimination of Milk Freshness Based on Synchronous Two-Dimensional Visible/Near-Infrared Correlation Spectroscopy Coupled with Chemometrics

Milk is one of the preferred beverages in modern healthy diets, and its freshness is of great significance for product sales and applications. By combining the two-dimensional (2D) correlation spectroscopy technique and chemometrics, a new method based on visible/near-infrared (Vis/NIR) spectroscopy was proposed to discriminate the freshness of milk. To clarify the relationship be-tween the freshness of milk and the spectra, the changes in the physicochemical indicators of milk during storage were analyzed as well as the Vis/NIR spectra and the 2D-Vis/NIR correlation spectra. The threshold-value method, linear discriminant analysis (LDA) method, and support vector machine (SVM) method were used to construct the discriminant models of milk freshness, and the parameters of the SVM-based models were optimized by the grid search method and particle swarm optimization algorithm. The results showed that with the prolongation of storage time, the absorbance of the Vis/NIR spectra of milk gradually increased, and the intensity of autocorrelation peaks and cross peaks in synchronous 2D-Vis/NIR spectra also increased significantly. Compared with the SVM-based models using Vis/NIR spectra, the SVM-based model using 2D-Vis/NIR spectra had a >15% higher prediction accuracy. Under the same conditions, the prediction performances of the SVM-based models were better than those of the threshold-value-based or LDA-based models. In addition, the accuracy rate of the SVM-based model using the synchronous 2D-Vis/NIR autocorrelation spectra was >97%. This work indicates that the 2D-Vis/NIR correlation spectra coupled with chemometrics is a great pattern to rapidly discriminate the freshness of milk, which provides technical support for improving the evaluation system of milk quality and maintaining the safety of milk product quality.

Establishment and Validation of Fourier Transform Infrared Spectroscopy (FT–MIR) Methodology for the Detection of Linoleic Acid in Buffalo Milk

Buffalo milk is a dairy product that is considered to have a higher nutritional value compared to cow’s milk. Linoleic acid (LA) is an essential fatty acid that is important for human health. This study aimed to investigate and validate the use of Fourier transform mid-infrared spectroscopy (FT-MIR) for the quantification of the linoleic acid in buffalo milk. Three machine learning models were used to predict linoleic acid content, and random forest was employed to select the most important subset of spectra for improved model performance. The validity of the FT-MIR methods was evaluated in accordance with ICH Q2 (R1) guidelines using the accuracy profile method, and the precision, the accuracy, and the limit of quantification were determined. The results showed that Fourier transform infrared spectroscopy is a suitable technique for the analysis of linoleic acid, with a lower limit of quantification of 0.15 mg/mL milk. Our results showed that FT-MIR spectroscopy is a viable method for LA concentration analysis.

Adaptive Spectral Model for abnormality detection based on physiological status monitoring of dairy cows

This research study developed milk spectral data-driven approach, called Adaptive Spectral Model for Abnormality Detection - ASMAD, for detection of physiological abnormalities of individual dairy cows. The algorithm is based on the logic that milk spectra of each individual cow is highly animal-specific, which means it could be used as a respective individual marker for identification. When the algorithm fails to recognize the milk spectra as coming from a certain animal, instead of being treated as a mistake, this outcome is accepted as a deviation of the respective individual marker, and a potential indicator of abnormal physiological state. For the purpose of ASMAD development, near infrared spectra of milk of seven dairy cows have been collected daily during 1-year period. The abnormality detection model is built using supervised recognition method Soft Independent Modeling of Class Analogies - SIMCA, and optimized with respect to spectral pre-processing, choice of the wavelength region and size of the time-window when developing the adaptive model. The sensitivity and specificity of ASMAD were dependent on the animal, and in the ranges 40.00-64.29% and 87.23-98.86%, respectively. Considering significant level of day-to-day spectral variation and multitude of physiological and environmental factors influence on milk constituents and spectra, these results represent a significant potential for creating a health-status monitoring and detection of abnormal physiological states in dairy animals. The adaptive modeling based on the time series of spectral data collected from the individual organism utilized in this work for monitoring physiological status and abnormality detection in dairy cows, has a good potential to be used for similar purposes in other animals and humans.

New research development on trans fatty acids in food: Biological effects, analytical methods, formation mechanism, and mitigating measures

The trans fatty acids (TFAs) in food are mainly generated from the ruminant animals (meat and milk) and processed oil or oil products. Excessive intake of TFAs (>1% of total energy intake) caused more than 500,000 deaths from coronary heart disease and increased heart disease risk by 21% and mortality by 28% around the world annually, which will be eliminated in industrially-produced trans fat from the global food supply by 2023. Herein, we aim to provide a comprehensive overview of the biological effects, analytical methods, formation and mitigation measures of TFAs in food. Especially, the research progress on the rapid, easy-to-use, and newly validated analytical methods, new formation mechanism, kinetics, possible mitigation mechanism, and new or improved mitigation measures are highlighted. We also offer perspectives on the challenges, opportunities, and new directions for future development, which will contribute to the advances in TFAs research.

Determination of nutritional health indexes of fresh bovine milk using near infrared spectroscopy

Bovine milk is one of the most complete foods that exist. During the last decades, milk FA have shown to improve human health due to the reduction in risk of cardiovascular disease and related pathologies. The aim of this study was to evaluate the feasibility of near infrared spectroscopy (NIRS) reflectance analysis to predict the nutritional value, fatty acid (FA) composition, and health index of fresh milk from dairy cows of pastoral systems. The prediction of Atherogenicity and Thrombogenicity indexes, along with other FA ratios in fresh milk samples by NIRS were precise and accurate. In addition, the calibration model obtained by NIRS provides an opportunity for the routine quantification of milk’s healthy FA such as omega-3 and conjugated linoleic acid (CLA), with applications in the dairy industry for food labeling, and at the farm level for management of the dairy cow’s diet.

Data Science in the Food Industry

Food safety is one of the main challenges of the agri-food industry that is expected to be addressed in the current environment of tremendous technological progress, where consumers' lifestyles and preferences are in a constant state of flux. Food chain transparency and trust are drivers for food integrity control and for improvements in efficiency and economic growth. Similarly, the circular economy has great potential to reduce wastage and improve the efficiency of operations in multi-stakeholder ecosystems. Throughout the food chain cycle, all food commodities are exposed to multiple hazards, resulting in a high likelihood of contamination. Such biological or chemical hazards may be naturally present at any stage of food production, whether accidentally introduced or fraudulently imposed, risking consumers' health and their faith in the food industry. Nowadays, a massive amount of data is generated, not only from the next generation of food safety monitoring systems and along the entire food chain (primary production included) but also from the Internet of things, media, and other devices. These data should be used for the benefit of society, and the scientific field of data science should be a vital player in helping to make this possible.

Real-Time Monitoring of Yogurt Fermentation Process by Aquaphotomics Near-Infrared Spectroscopy

Automated quality control could have a substantial economic impact on the dairy industry. At present, monitoring of yogurt production is performed by sampling for microbiological and physicochemical measurements. In this study, Near-Infrared Spectroscopy (NIRS) is proposed for non-invasive automated control of yogurt production and better understanding of lactic acid bacteria (LAB) fermentation. UHT (ultra-high temperature) sterilized milk was inoculated with Bulgarian yogurt and placed into a quartz cuvette (1 mm pathlength) and test-tubes. Yogurt absorbance spectra (830-2500 nm) were acquired every 15 min, and pH, in the respective test-tubes, was measured every 30 min, during 8 h of fermentation. Spectral data showed substantial baseline and slope changes with acidification. These variations corresponded to respective features of the microbiological growth curve showing water structural changes, protein denaturation, and coagulation of milk. Moving Window Principal Component Analysis (MWPCA) was applied in the spectral range of 954-1880 nm to detect absorbance bands where most variations in the loading curves were caused by LAB fermentation. Characteristic wavelength regions related to the observed physical and multiple chemical changes were identified. The results proved that NIRS is a valuable tool for real-time monitoring and better understanding of the yogurt fermentation process.

The recent advances of near-infrared spectroscopy in dairy production-a review

One of the major issues confronting the dairy industry is the efficient evaluation of the quality of feed, milk and dairy products. Over the years, the use of rapid analytical methods in the dairy industry has become imperative. This is because of the documented evidence of adulteration, microbial contamination and the influence of feed on the quality of milk and dairy products. Because of the delays involved in the use of wet chemistry methods during the evaluation of these products, rapid analytical techniques such as near-infrared spectroscopy (NIRS) has gained prominence and proven to be an efficient tool, providing instant results. The technique is rapid, nondestructive, precise and cost-effective, compared with other laboratory techniques. Handheld NIRS devices are easily used on the farm to perform quality control measures on an incoming feed from suppliers, during feed preparation, milking and processing of cheese, butter and yoghurt. This ensures that quality feed, milk and other dairy products are obtained. This review considers research articles published in reputable journals which explored the possible application of NIRS in the dairy industry. Emphasis was on what quality parameters were easily measured with NIRS, and the limitations in some instances.

Rapid Analysis of Milk Using Low-Cost Pocket-Size NIR Spectrometers and Multivariate Analysis

The miniaturisation of analytical devices, reduction of analytical data acquisition time, or the reduction of waste generation throughout the analytical process are important requirements of modern analytical chemistry, and in particular of green analytical chemistry. Green analytical chemistry has fostered the development of a new generation of miniaturized near-infrared spectroscopy (NIR) spectrometric systems. However, one of the drawbacks of these systems is the need for a compromise between the performance parameters (accuracy and sensitivity) and the aforementioned requirements of green analytical chemistry. In this paper, we evaluated the capabilities of two recently developed portable NIR instruments (SCiO and NeoSpectra) to achieve a rapid, simple and low-cost quantitative determination of commercial milk macronutrients. Commercial milk samples from Italy, Switzerland and Spain were chosen, covering the maximum range of variability in protein, carbohydrate and fat content, and multivariate calibration was used to correlate the recorded spectra with the macronutrient content of milk. Both SCiO and NeoSpectra can provide a fast and reliable analysis of fats in commercial milk, and they are able to correctly classify milk according to fat level. SCiO can also provide predictions of protein content and classification according to presence or absence of lactose.

Comparison of Fatty Acid Proportions Determined by Mid-Infrared Spectroscopy and Gas Chromatography in Bulk and Individual Milk Samples

Simple Summary

Information about fatty acid proportions in milk fat is important for many purposes, such as animal breeding, animal health control, as well as human nutrition. The routine methods for determining fatty acid proportions (e.g., mid-infrared spectroscopy) are rapid and relatively cheap, but there is a need to compare them with the reference analytical method (gas chromatography) to ensure their validity and suitability for various milk samples. The aim of this study is to compare the proportions of single fatty acids and their sums determined by utilizing both of these analytical methods and the resulting correlation coefficients. Our results show that the mid-infrared spectroscopy method is more appropriate (both for bulk and individual milk samples) for fatty acids present in high proportions of the total fat and for the sum of fatty acids (such as saturated and unsaturated) than for fatty acids with low proportions.

Abstract

Rapid analytical methods can contribute to the expansion of milk fatty acid determination for various important practical purposes. The reliability of data resulting from these routine methods plays a crucial role. Bulk and individual milk samples (60 and 345, respectively) were obtained from Czech Fleckvieh and Holstein dairy cows in the Czech Republic. The correlation between milk fatty acid (FA) proportions determined by the routine method (infrared spectroscopy in the mid-region in connection with Fourier transformation; FT-MIR) and the reference method (gas chromatography; GC) was evaluated. To validate the calibration of the FT-MIR method, a linear regression model was used. For bulk milk samples, the correlation coefficients between these methods were higher for the saturated (SFAs) and unsaturated FAs (UFAs) (r = 0.7169 and 0.9232; p < 0.001) than for the trans isomers of UFAs (TFAs) and polyunsaturated FAs (PUFAs) (r = 0.5706 and 0.6278; p < 0.001). Similar results were found for individual milk samples: r = 0.8592 and 0.8666 (p < 0.001) for SFAs and UFAs, 0.1690 (p < 0.01) for TFAs, and 0.3314 (p < 0.001) for PUFAs. The correlation coefficients for TFAs and PUFAs were statistically significant but too low for practical analytical application. The results indicate that the FT-MIR method can be used for routine determination mainly for SFAs and UFAs.

Comparison of the Potential Abilities of Three Spectroscopy Methods: Near-Infrared, Mid-Infrared, and Molecular Fluorescence, to Predict Carotenoid, Vitamin and Fatty Acid Contents in Cow Milk

The objective of this work is to compare the ability of three spectroscopy techniques: molecular fluorescence, near-infrared (NIR), and mid-infrared with attenuated total reflectance (MIR-ATR) spectroscopy to predict the concentrations of 8 carotenoids, 6 vitamins and 22 fatty acids (FA) in cow’s milk. A dataset was built through the analysis of 242 frozen milk samples from different experiments. The milk compounds were analysed using reference methods and by NIR, MIR-ATR, and fluorescence to establish different predictive models. NIR spectroscopy allowed for better prediction of cis9-β-carotene, β-cryptoxanthin and the sum of carotenoids than the other techniques, with a coefficient of cross-validation in calibration (R²CV) > 0.60 and a coefficient of determination in validation (R²V) > 0.50. Their standard errors of prediction (SEP) were equal to 0.01, except for the sum of carotenoids (SEP = 0.15). However, MIR-ATR and fluorescence seem usable for the prediction of lutein and all-trans-β-carotene, respectively. These three spectroscopy methods did not allow us to predict (R²CV < 0.30) vitamin contents except, for vitamin A (the best R²CV = 0.65 with NIR and SEP = 0.15) and α-tocopherol (the best R²CV = 0.56 with MIR-ATR and SEP = 0.41), but all R²V were <0.30. NIR spectroscopy yielded the best prediction of the selected milk FA.

The characterisation of Mozzarella cheese microstructure using high resolution synchrotron transmission and ATR-FTIR microspectroscopy

Synchrotron Fourier transform infrared (S-FTIR) microspectroscopy allows the label-free examination of material microstructure but has not been widely applied to dairy products. Here, S-FTIR microspectroscopy was applied to observe the microstructure of Mozzarella cheese and assess the protein and lipid distribution within individual cheese blocks. High lipid and high protein areas were identified in transmission and attenuated total reflectance (ATR) analysis modes and the secondary structures of cheese proteins determined. Hierarchical cluster analysis and principal component analysis identified variation in random coil, water content, lipid carbonyl and methylene stretching across the sampled area. Similar spectral features were obtained in both analysis modes; spatial resolution was higher with ATR and small differences were noted, potentially as a result of differences in sample preparation. S-FTIR is a useful microscopy tool that can detect structural alterations that may affect product properties and may assist reverse engineering of a range of dairy products.

Applications of Raman spectroscopic techniques for quality and safety evaluation of milk: A review of recent developments

Milk is a complete nutrient source for humans. The quality and safety of milk are critical for both producers and consumers, thereby the dairy industry requires rapid and nondestructive methods to ensure milk quality and safety. However, conventional methods are time-consuming and laborious, and require complicated preparation procedures. Therefore, the exploration of new milk analytical methods is essential. This current review introduces the principles of Raman spectroscopy and presents recent advances since 2012 of Raman spectroscopic techniques mainly involving surface-enhanced Raman spectroscopy (SERS), fourier-transform (FT) Raman spectroscopy, near-infrared (NIR) Raman spectroscopy, and micro-Raman spectroscopy for milk analysis including milk compositions, microorganisms and antibiotic residues in milk, as well as milk adulterants. Additionally, some challenges and future outlooks are proposed. The current review shows that Raman spectroscopic techniques have the promising potential for providing rapid and nondestructive detection of milk parameters. However, the application of Raman spectroscopy on milk analysis is not common yet since some limitations of Raman spectroscopy need to be overcome before making it a routine tool for the dairy industry.

Prediction of Congou Black Tea Fermentation Quality Indices from Color Features Using Non-Linear Regression Methods

Fermentation is the key process to produce the special color of congou black tea. The machine vision technology is applied to detect the color space changes of black tea's color in RGB, Lab and HSV, and to find out its relevance to black tea's fermentation quality. And then the color feature parameter is used as input to establish physicochemical indexes (TFs, TRs, and TBs) and sensory features' linear and non-linear quantitative evaluation model. Results reveal that color features are significantly correlated to quality indices. Compared with the other two color models (RGB and HSV), CIE Lab model can better reflect the dynamic variation features of quality indices and foliage color information of black tea. The predictability of non-linear models (RF and SVM) is superior to PLS linear model, while RF model presents a slight advantage over the classic SVM model since RF model can better represent the quantitative analytical relationship between image information and quality indices. This research has proved that computer image color features and non-linear method can be used to quantitatively evaluate the changes of quality indices (e.g. sensory quality) and the pigment during black tea's fermentation. Besides, the test is simple, fast, and nondestructive.

Prediction of Moisture Content for Congou Black Tea Withering Leaves Using Image Features and Nonlinear Method

Withering is the first step in the processing of congou black tea. With respect to the deficiency of traditional water content detection methods, a machine vision based NDT (Non Destructive Testing) method was established to detect the moisture content of withered leaves. First, according to the time sequences using computer visual system collected visible light images of tea leaf surfaces, and color and texture characteristics are extracted through the spatial changes of colors. Then quantitative prediction models for moisture content detection of withered tea leaves was established through linear PLS (Partial Least Squares) and non-linear SVM (Support Vector Machine). The results showed correlation coefficients higher than 0.8 between the water contents and green component mean value (G), lightness component mean value (L^*) and uniformity (U), which means that the extracted characteristics have great potential to predict the water contents. The performance parameters as correlation coefficient of prediction set (Rp), root-mean-square error of prediction (RMSEP), and relative standard deviation (RPD) of the SVM prediction model are 0.9314, 0.0411 and 1.8004, respectively. The non-linear modeling method can better describe the quantitative analytical relations between the image and water content. With superior generalization and robustness, the method would provide a new train of thought and theoretical basis for the online water content monitoring technology of automated production of black tea.

Could predicting fatty acid profile by mid-infrared reflectance spectroscopy be used as a method to increase the value added by milk production chains?

The aims of this work were (1) to develop prediction equations from mid-infrared spectroscopy (MIRS) to establish a detailed fatty acid (FA) composition of milk; (2) to propose a milk FA index, utilizing MIRS-developed equations, in which the precision of the FA-prediction equations is taken into account to increase the value of milk; and (3) to show application examples. A total of 651 bulk cow milk samples were collected from 245 commercial farms in northwest Italy. The results of the 651 gas chromatography analyses were used to establish (421 samples) and to validate (230 samples) the outcomes of the FA composition prediction that had been obtained by MIRS. A class-based approach, in which the obtained MIRS equations were used, was proposed to define a milk classification. The method provides a numerical index [milk FA index (MFAI)] that allows a premium price to be quantified to increase the value of a favorable FA profile of milk. Ten FA were selected to calculate MFAI, according to their relevance for human health and potential cheese sensory properties, and animal welfare and environmental sustainability were also considered. These factors were selected as dimensions of MFAI. A statistical analysis and expert judgment aggregation were performed on the selected FA by weighting the FA and normalizing the dimensions to reduce redundancy. A class approach was applied, using the precision of the MIRS equations to establish the classes. The median FA concentration of the data set was set as a reference value of class 0. The width, number, and limits of classes above and below the median were calculated using the 95% confidence level of the standard error of prediction, corrected with the bias of each FA. A progressive number and a positive or negative sign were assigned to each FA class above or below the median according to their role in the above mentioned dimensions. The sum of the numbers of each class, associated with its sign for each FA, was used to generate MFAI. The MFAI was applied to dairy farms characterized by different feeding strategies, all of which deliver milk to a commercial dairy plant. The MFAI values ranged from 0.7 to 4.2, and large variations, which depended on the cows' diet and forage quality, were observed for each feeding system. The proposed method has been found to be flexible and adaptable to several contexts on both intensive and extensive dairy farms.

The potential of Fourier transform infrared spectroscopy of milk samples to predict energy intake and efficiency in dairy cows

Knowledge of animal-level and herd-level energy intake, energy balance, and feed efficiency affect day-to-day herd management strategies; information on these traits at an individual animal level is also useful in animal breeding programs. A paucity of data (especially at the individual cow level), of feed intake in particular, hinders the inclusion of such attributes in herd management decision-support tools and breeding programs. Dairy producers have access to an individual cow milk sample at least once daily during lactation, and consequently any low-cost phenotyping strategy should consider exploiting measureable properties in this biological sample, reflecting the physiological status and performance of the cow. Infrared spectroscopy is the study of the interaction of an electromagnetic wave with matter and it is used globally to predict milk quality parameters on routinely acquired individual cow milk samples and bulk tank samples. Thus, exploiting infrared spectroscopy in next-generation phenotyping will ensure potentially rapid application globally with a negligible additional implementation cost as the infrastructure already exists. Fourier-transform infrared spectroscopy (FTIRS) analysis is already used to predict milk fat and protein concentrations, the ratio of which has been proposed as an indicator of energy balance. Milk FTIRS is also able to predict the concentration of various fatty acids in milk, the composition of which is known to change when body tissue is mobilized; that is, when the cow is in negative energy balance. Energy balance is mathematically very similar to residual energy intake (REI), a suggested measure of feed efficiency. Therefore, the prediction of energy intake, energy balance, and feed efficiency (i.e., REI) from milk FTIRS seems logical. In fact, the accuracy of predicting (i.e., correlation between predicted and actual values; root mean square error in parentheses) energy intake, energy balance, and REI from milk FTIRS in dairy cows was 0.88 (20.0MJ), 0.78 (18.6MJ), and 0.63 (22.0MJ), respectively, based on cross-validation. These studies, however, are limited to results from one research group based on data from 2 contrasting production systems in the United Kingdom and Ireland and would need to be replicated, especially in a range of production systems because the prediction equations are not accurate when the variability used in validation is not represented in the calibration data set. Heritable genetic variation exists for all predicted traits. Phenotypic differences in energy intake also exists among animals stratified based on genetic merit for energy intake predicted from milk FTIRS, substantiating the usefulness of such FTIR-predicted phenotypes not only for day-to-day herd management, but also as part of a breeding strategy to improve cow performance.

Prediction of methane emission from lactating dairy cows using milk fatty acids and mid-infrared spectroscopy

Enteric methane (CH4 ) production is among the main targets of greenhouse gas mitigation practices for the dairy industry. A simple, robust and inexpensive measurement technique applicable on a large scale to estimate CH4 emission from dairy cattle would therefore be valuable. Milk fatty acids (MFA) are related to CH4 production because of the common biochemical pathway between CH4 and fatty acids in the rumen. A summary of studies that investigated the predictive power of MFA composition for CH4 emission indicated good potential, with predictive power ranging between 47% and 95%. Until recently, gas chromatography (GC) was the principal method used to determine the MFA profile, but GC is unsuitable for routine analysis. This has led to the application of mid-infrared (MIR) spectroscopy. The major advantages of using MIR spectroscopy to predict CH4 emission include its simplicity and potential practical application at large scale. Disadvantages include the inability to predict important MFA for CH4 prediction, and the moderate predictive power for CH4 emission. It may not be sufficient to predict CH4 emission based on MIR alone. Integration with other factors, like feed intake, nutrient composition of the feed, parity, and lactation stage may improve the prediction of CH4 emission using MIR spectra. © 2016 Society of Chemical Industry.

Fatty acids and fat-soluble vitamins in ewe's milk predicted by near infrared reflectance spectroscopy. Determination of seasonality

The aim of the present work was to determine the fatty acid and fat-soluble vitamin composition and the season of ewe's milk production using NIR spectroscopy. 219 ewe's milk samples from different breeds and feeding regimes were taken each month over one year. Fatty acids were analyzed by gas chromatography, and retinol and α-, and γ-tocopherol by liquid chromatography. The results showed that the quantification was more accurate for the milk dried on paper, except for vitamins. Calibration statistical descriptors on milk dried on paper were good for capric, lauric, myristic, palmitoleic, stearic and oleic acids, and acceptable for caprilic, undecanoic, 9c, 11tCLA, ΣCLA, PUFA, ω3, ω6, retinol and α-tocopherol. The equations for the discrimination of seasonality was obtained using the partial least squares discriminant analysis (PLSDA) algorithm. 93% of winter samples and 89% of summer samples were correctly classified using the NIR spectra of milk dried on paper.

Building global models for fat and total protein content in raw milk based on historical spectroscopic data in the visible and short-wave near infrared range

A large set of fresh cow milk samples collected from many suppliers over a large geographical area in Russia during a year has been analyzed by optical spectroscopy in the range 400-1100 nm in accordance with previously developed scatter-based technique. The global (i.e. resistant to seasonal, genetic, regional and other variations of the milk composition) models for fat and total protein content, which were built using partial least-squares (PLS) regression, exhibit satisfactory prediction performances enabling their practical application in the dairy. The root mean-square errors of prediction (RMSEP) were 0.09 and 0.10 for fat and total protein content, respectively. The issues of raw milk analysis and multivariate modelling based on the historical spectroscopic data have been considered and approaches to the creation of global models and their transfer between the instruments have been proposed. Availability of global models should significantly facilitate the dissemination of optical spectroscopic methods for the laboratory and in-line quantitative milk analysis.