Ultrasound assisted extraction and characterization of pectin from tomato waste

Extraction optimization and characterization of durian (Durio zibethinus) rind pectin extracted by subcritical water

The subcritical water extraction (SWE) of pectin from durian rind was optimized using response surface methodology with Box-Behnken experimental design. The FTIR, SEM, and DSC analysis were used to examine the physicochemical, structural, thermal, and functional characteristics of the subcritical water-extracted pectin (SWEP) under optimum conditions and contrasted with the conventional acid-extracted pectin (CAEP). The optimum yield of pectin (5.43 %) was achieved under the temperature of 120 °C, time of 18.5 min, and sieve size of 100 μm. The comparative analysis reveals that the yield of SWEP was ∼2.07 % higher than the CAEP yield (3.36 %). Similarly, the equivalent weight, esterification degree, methoxy concentration, anhydrouronic acid content, water holding capacity, and oil holding capacity of SWEP were consistently higher than the CAEP. Therefore, SWE proved effective for obtaining high-quality pectin from durian rind and offers a simplified, cost-effective, and eco-friendly approach, which makes it a viable method for industrial application.

Extraction of pectin from watermelon rinds using sequential ultrasound-microwave technique: Optimization using RSM and ANN modeling and characterization

This study aimed to optimize pectin extraction from watermelon (Citrullus lanatus) rind using sequential ultrasound-microwave assisted extraction (UMAE) with artificial neural network (ANN) and response surface methodology (RSM). The effects of pH, sonication time, microwave power, and irradiation time on pectin yield were evaluated. The ANN model showed higher precision in predicting yield compared to the RSM model. The optimal yield was 32.11 % under the conditions of pH 2.01, sonication time 54.23 min, microwave power 900 watts, and irradiation time 6.34 min. This study evaluated the effects of different extraction techniques, including ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), and microwave-ultrasound-assisted extraction (MUAE), on pectin yield and their physicochemical properties under optimal UMAE conditions. The highest pectin yield was achieved with UMAE, followed by MUAE, MAE, and UAE. The Fourier transform infrared spectroscopy (FTIR) analysis confirmed the presence of homogalacturonan, galacturonic acid backbone, and methyl esters in the extracted pectin. The viscosity study revealed that the pectin solution showed pseudoplastic behavior at 0.2 % w/v. All extracted pectin in different methods had high-methoxy content ranging from 7.68 ± 0.56 % to 11.96 ± 1.29 % and a degree of esterification between 56.55 ± 0.68 % and 63.43 ± 1.54 %. However, UMAE showed significantly lower energy consumption and CO2 emissions, suggesting it as a sustainable approach for pectin extraction from watermelon rind.

Rheological property and thermodynamic parameters of Ficus carica Linn. pectin: A natural low-methoxyl pectin (LMP) with excellent pseudoplasticity

With the annual increase in the production of fig fruit (Ficus carica Linn.) in China, the processing and utilization of its by-products have become an important topic in fig research. In this study, a new type of natural low-methoxyl pectin (LMP) was obtained from figs by acid extraction (DE = 44.42 %). Fig pectin was an acidic heteropolysaccharide with a molecular weight of 75.9 kDa, and it was composed of galacturonic acid (248.09 mg/g), and neutral sugars including galactose (15.37 mg/g), arabinose (13.23 mg/g), rhamnose (6.74 mg/g), glucuronic acid (6.27 mg/g), xylose (0.78 mg/g), and fucose (0.26 mg/g). Shear-thinning behavior was shown at the concentration between 20 g/L - 60 g/L and the temperature between 5 °C - 50 °C of pectin solution, power law rheology model was used to describe the flow behavior of pectin solution. The apparent viscosity of pectin gradually raised with increasing concentration (at 25 °C, K is from 39.72 to 4140.39 Pa·sn, and n is from 0.85 to 0.42) and decreasing temperature (at 50 g/L, K is from 2233.55 to 17,549.48 Pa·sn, and n is from 0.37 to 0.47). Interestingly, pseudoplastic behavior was observed in all samples. Pectin solution exhibited thixotropic behavior, through the hysteresis loop through an up-down cycle in the shear rate-shear stress curve. The elastic modulus (G') and viscous modulus (G") of the pectin gradually reduced with decreasing concentration (20 g/L - 60 g/L) and increasing temperature (5°C - 50°C). Pectin exhibited a transition from elasticity (G' > G") to viscosity (G' < G") at higher concentration. The thermal degradation of pectin was mainly divided into three stages at different heating rate (5, 10, 15, 20 K-1). With the increasing of the heating rate, melt temperature (Tm) (240.66 °C - 250.69 °C) and enthalpy change (ΔH) (28.65 J/g - 90.43 J/g) increased. These results enriched understanding of the rheological property and thermodynamic parameters of fig pectin and were conducive to expanding the application of fig pectin in food processing.

Simultaneous analysis of PAEs in edible oil and dietary exposure assessment in Hubei

Phthalic acid esters (PAEs), widely used in food processing, pose significant risks to food safety and human health. A rapid and accurate method to simultaneously detect 18 PAEs in edible oil was developed and applied to evaluate daily exposures in Hubei. By using ultrasound-assisted extraction and GC-MS with deuterated isotopes, we improved extraction efficiency and detection accuracy. The method exhibited excellent linearity and low limits of quantification, with average recoveries ranging from 84.32 % to 115.80 % and relative standard deviations between 2.08 % and 12.82 %. Among 30 commercial edible oils analyzed, higher average levels of DBP, DEHP, and DINP were found at 0.207, 1.767, and 0.600 mg/kg, respectively. Dietary exposure assessment indicated that daily intakes were below health guideline values, but DEHP posed a relatively higher health risk. These findings provide a simple method and reference for assessing PAEs exposure and health risk in edible oil.

Optimization and characterization of physicochemical, morphological, structural, thermal, and rheological properties of microwave-assisted extracted pectin from Dillenia indica fruit

Microwave-assisted extraction of pectin from Dillenia indica (DI) fruit was optimized using Box-Behnken design to maximize yield and quality. Parameters such as solid:solvent (1:10-1:30), microwave power (200-600 W), and extraction time (4-10 min) were varied to determine the optimal conditions. Through experimentation, the optimized extraction parameters were identified as 1:23.66 solid:solvent, 400 W microwave power, and 7 min of extraction time, under which the predicted yield and equivalent weight were 19.68 % and 915.93, respectively. The optimized conditions were validated experimentally (yield:19.4 ± 0.35 %) and equivalent weight:914.57 ± 0.62), showing close agreement with predicted values. Physicochemical properties of the extracted pectin were determined, revealing an effective pore radius of 0.263 ± 0.005 mm and a swelling index order of: water(1) > pH 6(0.7) > HCl(0.3). Moisture content was measured as 7.23 ± 0.25 %, while ash content was found to be 2.23 ± 0.25 %. Further analysis included the determination of methoxyl value, anhydrouronic acid content, degree of esterification, and protein content, which were 9.61 ± 0.31 %, 73.56 ± 1.86 %, 74.15 ± 0.28 %, and 1.16 ± 0.16 %, respectively. Monosaccharide composition revealed presence of neutral sugars, glucose, arabinose and rhamnose and molecular weight was 71,489 g/mol. Morphological characteristics, assessed using scanning electron microscopy, showed a rough, irregular surface of DI fruit pectin. Fourier-transform infrared spectroscopy (FTIR) indicated similarity to standard high methoxyl pectin, while nuclear magnetic resonance (NMR) confirmed characteristic functional groups. Thermal behaviour, determined via differential scanning calorimetry (DSC), exhibited endothermic and exothermic transitions at 83.6 °C and 260.027 °C, respectively. Rheological and functional properties revealed DI fruit pectin solution as a non-Newtonian fluid with shear thinning behaviour, forming weak gels and that its emulsion capacity increased with increase in pectin concentration. Overall, this study provides a comprehensive characterization of microwave-assisted extracted pectin from Dillenia indica fruit, offering insights into its potential applications in food industries.

Extraction of cell wall pectins and hemicellulose from agro-industrial wastes: A sustainable alternative source

The efficient repurposing of agro-industrial waste has significantly enhanced the utilization of food resources. This study aims to propose a methodology for extracting cell wall polysaccharides from residues of mango (Mangifera indica), passion fruit (Passiflora edulis), and cashew (Anacardium occidentale). Polysaccharide fractions were obtained through sequential extraction protocols involving water, cyclohexane-trans-1,2-diamine tetracetate (CDTA), sodium carbonate:CDTA, and potassium hydroxide. These fractions were categorized as water-soluble pectin (WSP), CDTA-soluble pectin (CSP), sodium carbonate-soluble pectin (SSP), and hemicellulose (HC), respectively. Each polysaccharide fraction was characterized by Nuclear Magnetic Resonance (NMR) spectroscopy and Gel Permeation Chromatography (GPC). Monosaccharide composition was determined using Gas Chromatography-Mass Spectrometry (GC-MS). NMR spectra of WSP, CSP, and SSP fractions exhibited characteristic pectin features, while the HC fraction primarily comprised hemicellulose. Consequently, the proposed methodology demonstrates potential as a standardized protocol for the extraction of pectin and hemicellulose from various food sources.

Green technologies for extracting plant waste functional ingredients and new food formulation: A review

Nowadays, there is a growing interest in food waste recovery by both consumers and companies. Food waste of plant origin is a source of bioactive compounds, such as phenolic acids, anthocyanins, flavonoids, phytosterols, carotenoids, and tocopherols, with well-known antioxidant, anti-glycemic, and antimicrobial properties. The use of green and sustainable technologies to recover bioactive compounds from food waste is a possible solution to valorize waste following the principles of green chemistry. Furthermore, today's consumers are more attracted, informed, and aware of the benefits associated with the consumption of functional foods, and with this in mind, the use of extracts rich in beneficial compounds obtained by green technologies from food waste can be a valid alternative to prepare functional foods. In this review, the recovery of polyphenols and fibers with green technologies from food waste for the formulation of functional foods was presented.

Enzymatic production, physicochemical characterization, and prebiotic potential of pectin oligosaccharides from pisco grape pomace

The prebiotic capacity of Pectin Oligosaccharides (POS) is influenced by structural factors such as molecular size, composition, and degree of esterification, which affect their interaction with the gut microbiota. While existing literature has predominantly examined POS derived from apple and citrus pectins, the extrapolation of these findings to other pectin sources remains complex due to variations in their composition. This study focused on obtaining POS with prebiotic potential from pisco grape pomace through controlled enzymatic hydrolysis, resulting in three molecular size fractions: <3 kDa, 3-10 kDa, and > 10 kDa. The POS fractions were analyzed using FTIR, HPSEC, HPLC, and MALDI-TOF-MS techniques to characterize their physical-chemical properties. Each fraction presented distinct compositions, with the <3 kDa fraction showing a higher concentration of galacturonic acid and glucose, while the >10 kDa fraction was also composed of rhamnose and arabinose. Notably, the <3 kDa fraction supported greater biomass growth of the probiotic strain Lactobacillus casei ATCC 393 compared to the other fractions. In contrast, the non-probiotic strain Escherichia coli ATCC 25922 achieved the lowest biomass with this fraction. Consequently, the <3 kDa POS fraction exhibited the highest prebiotic index. This fraction, composed of oligomers from the rhamnogalacturonan region and arabino-oligosaccharides with a degree of polymerization between two and five, highlights its potential for further research and applications. Therefore, investigating other sources and optimizing extraction conditions could lead to developing novel prebiotic formulations that supply specific probiotic strains for a symbiotic product.

Downstream Processing of Crude Ultrasound-Extracted Pectin From Saba Banana (Musa acuminata x balbisiana (BBB Group) "Saba") Peel

Ultrasound-assisted extraction of pectin from Saba banana (Musa acuminata x balbisiana (BBB Group) "Saba") peels produced crude pectin that requires further purification. Two downstream processes (alcohol washing (AW) and acid demethylation (AD)) were compared. AW involved gelatinous precipitate washing with 85% alcohol and pressing to squeeze out liquids, while AD involved a sequential AW of the dried pectin with 60% acidified alcohol, and 60% and 95% alcohol solutions. Results showed that both methods produced low methoxyl pectins with similar color, yield, and moisture content, with no significant (p > 0.05) differences observed. AD, however, produced pectin with better quality in terms of ash content and anhydrouronic acid (AUA) content relative to the control. Fourier transform infrared spectra revealed that the samples contain -OH, C-H, COO-, COO, and C-O groups, but only AD has COO-R due to structural modification. Overall, AD has the potential to improve the quality of crude ultrasound-extracted pectin from Saba banana peels. Yet, pre-extraction processing methods are necessary to meet FAO color standards for pectin.

Exploring the potential of waste biomass-derived pectin and its functionalized derivatives for water treatment

Environmental pollution remains a constant challenge due to the indiscriminate use of fossil fuels, mining activities, chemicals, drugs, aromatic compounds, pesticides, etc. Many emerging pollutants with no fixed standards for monitoring and control are being reported. These have adverse impacts on human life and the environment around us. This alarms the wastewater management towards developing materials that can be used for bulk water treatment and are easily available, low cost, non-toxic and biodegradable. Waste biomass like pectin is extracted from fruit peels which are a discarded material. It is used in pharmaceutical and nutraceutical applications but its application as a material for water treatment is very limited in literature. The scientific gap in literature review reports are evident with discussion only on pectin based hydrogels or specific pectin derivatives for some applications. This review focuses on the chemistry, extraction, functionalization and production of pectin derivatives and their applications in water treatment processes. Pectin functionalized derivatives can be used as a flocculant, adsorbent, nano biopolymer, biochar, hybrid material, metal-organic frameworks, and scaffold for the removal of heavy metals, ions, toxic dyes, and other contaminants. The huge quantum of pectin biomass may be explored further to strengthen environmental sustainability and circular economy practices.

Pectins Rich in RG-I Extracted from Watermelon Peel: Physicochemical, Structural, Emulsifying, and Antioxidant Properties

RG-I pectin has excellent health benefits, but its raw materials are relatively scarce, and its complex structure often breaks down its side-chain structure during the extraction process. In this study, the physicochemical and antioxidant properties of a branched-chain-rich pectin gained from watermelon peel were demonstrated, and the structure-function relationships of RG-I-enriched pectin and emulsification properties were investigated. Fourier transform infrared spectroscopy, high-performance anion exchange chromatography, high-performance gel permeation chromatography, nuclear magnetic resonance spectroscopy, and methylation analyses reveal it as acetylated, low-methoxylated pectin, rich in RG-I side chains (MW: 1991 kDa, RG-I = 66.17%, methylation degree: 41.45%, (Ara + Gal)/Rha: 20.59%). RPWP outperforms commercial citrus pectin in emulsification and stability, significantly preventing lipid oxidation in emulsions. It also exhibits free radical scavenging abilities, contributing to its effectiveness in preventing lipid oxidation. Emulsions made with RPWP show higher viscosity and form a weak gel network (G' > G″), enhancing stability by preventing phase separation. These findings position watermelon peel as a good source of RG-I pectin and deepen our understanding of RPWP behavior in emulsion systems, which may be useful in the food and pharmaceutical fields.

Modification, biological activity, applications, and future trends of citrus fiber as a functional component: A comprehensive review

Citrus fiber, a by-product of citrus processing that has significant nutritional and bioactive properties, has gained attention as a promising raw material with extensive developmental potential in the food, pharmaceutical, and feed industries. However, the lack of in-depth understanding regarding citrus fiber, including its structure, modification, mechanism of action, and potential applications is holding back its development and utilization in functional foods and drugs. This review explores the status of extraction methods and modifications applied to citrus fiber to augment its health benefits. With the aim of introducing readers to the potential health benefits of citrus fibers, we have placed special emphasis on their regulatory mechanisms in the context of various conditions, including type 2 diabetes mellitus, cardiovascular disease, obesity, and cancer. Furthermore, this review highlights the applications and prospects of citrus fiber, aiming to provide a theoretical basis for the utilization and exploration of this valuable resource.

Enhancing pectin extraction from orange peel through citric acid-assisted optimization based on a dual response

Pectin is widely used in several products in the industry. Conventionally, strong and harmful acids are used for its extraction. This study optimized the extraction of orange peel's pectin using citric acid, considering yield and degree of esterification (DE) as response variables. Proximal analyses were performed, and the samples were subjected to a Box-Behnken design on three central points, considering as variables the temperature, time, and pH. The results of proximate analyses of the orange peels revealed 11.76 % moisture content, 87.26 % volatiles, 0.09 % ash, 50.45 % soluble carbohydrates, 70.60 % total carbohydrates, 0.89 % fixed carbon, 5.35 % lipids, and 36.75 mg GAE/g of phenolic compounds. The resulting second-order polynomial model described the relation of the input and output variables related to each other. The best performance to obtain a higher yield (18.18 %) of high methoxyl pectin (DE 50 %) was set at 100 °C/30 min/pH 2.48. Pectin showed antioxidant properties by ABTS and DPPH assays and similar thermal properties to the commercial polymer. Its equivalent weight was 1219.51 mol/g, and the methoxyl and anhydrouronic acid were 2.23 and 67.10 %, respectively. Hence, pectin extraction with citric acid results in a high-quality polymer and could be used as a gelling agent, stabilizer, or texturizer in food products.

Tailoring Pectin-PLA Bilayer Film for Optimal Properties as a Food Pouch Material

This study focuses on developing a biodegradable film using a novel hybrid citrus peel pectin. A bilayer approach with PLA was proposed and optimized using Response Surface Methodology (RSM) to complement pectin films' mechanical and barrier property limitations. The optimized film composition (2.90 g PLA and 1.96 g pectin) showed enhanced mechanical strength with a tensile strength (TS) of 7.04 MPa and an elongation at break (EAB) of 462.63%. In addition, it demonstrated lower water vapor (1.45 × 10-10 g/msPa), oxygen (2.79 × 10-7 g/ms) permeability, and solubility (23.53%). Compared to single-layer pectin films, the optimized bilayer film had a 25% increased thickness, significantly improved water barrier (3806 times lower) and oxygen barrier (3.68 times lower) properties, and 22.38 times higher stretchability, attributed to hydrogen bond formation, as confirmed by FTIR analysis. The bilayer film, effectively protected against UV and visible light, could be a barrier against light-induced lipid oxidation. Moreover, it demonstrated superior seal efficiency, ensuring secure sealing in practical applications. The bilayer pouch containing mustard dressing exhibited stable sealing with no leakage after immersion in hot water and ethanol, making it suitable for secure food pouch packaging.

Influence of Different Drying Processes on the Chemical and Texture Profile of Cucurbita maxima Pulp

The effects of hot air (HAD), vacuum (VAD) and conductive (CD) drying on the chemical and textural profiles of Cucurbita maxima pulp were investigated to find suitable drying conditions to avoid postharvest losses of pumpkin. The results showed that the drying methods had a significant effect (p < 0.05) on the chemical and textural profiles of pumpkin pulp. The ash content was lower in VAD (up to 7.65%) than in HAD (up to 9.88%) and CD pulp (up to 9.21%). The samples of HAD, CD and VAD had a higher fat content, up to 3.07, 2.66 and 2.51%, respectively, than fresh pulp (1.55%). The total fibre content is lower for VAD (up to 8.78%) than for HAD (up to 15.43%) and CD pulp (13.94%). HAD pulp at 70 °C (~15.51%) and VAD and CD pulp processed between 50 and 60 °C (~22%) are good sources of protein. HAD and CD pulp at 70 °C and VAD at 50 °C resulted in a high sugar content (up to 83.23%). In addition to drying, the extraction time of 40 min used in ultrasound-assisted extraction is optimal, especially for protein and sugar recovery in dried samples. Drying also led to strong changes in the textural properties of the pulp, so that an excellent dried intermediate product is the one obtained using HAD at a temperature of 70 °C and an airflow of 0.5 m/s.

Synthesizing pectin-crosslinked gum ghatti hydrogel for efficient adsorptive removal of malachite green

Pectin-crosslinked gum ghatti hydrogel (PGH) has been synthesized utilizing pectin and gum ghatti through an uncomplicated and inexpensive copolymerization method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM-elemental mapping), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS) characterization techniques have been employed to determine various structural, chemical and compositional characteristics of fabricated PGH. Three different weight ratios (1:1, 2:1, or 1:2 for pectin and gum ghatti, respectively) were employed to synthesize three distinct types of PGH. Swelling studies has been done to determine the best ratios for PGH fabrication. PGH has been assessed as an adsorbent for the removal of malachite green dye from aqueous solutions. The effects of PGH dosage (100-400 mg/L), dye concentration (10-160 mg/L), pH (2-9 pH), adsorption time (0-480 min), and temperature (25-55 °C) has been examined through batch solutions. According to Langmuir isotherm analysis, the maximum adsorption capacity is 658.1 mg/g. By using pseudo-second-order kinetics and the Freundlich adsorption isotherm, the adsorption process could be well explained. After five consecutive cycles, PGH had an adsorption percentage of 86.917 % for the malachite green dye. It is safe for the environment and may be used to remove malachite green (MG) dye from aqueous solutions.

Recent progress and treatment strategy of pectin polysaccharide based tissue engineering scaffolds in cancer therapy, wound healing and cartilage regeneration

Natural polymers and its mixtures in the form of films, sponges and hydrogels are playing a major role in tissue engineering and regenerative medicine. Hydrogels have been extensively investigated as standalone materials for drug delivery purposes as they enable effective encapsulation and sustained release of drugs. Biopolymers are widely utilised in the fabrication of hydrogels due to their safety, biocompatibility, low toxicity, and regulated breakdown by human enzymes. Among all the biopolymers, polysaccharide-based polymer is well suited to overcome the limitations of traditional wound dressing materials. Pectin is a polysaccharide which can be extracted from different plant sources and is used in various pharmaceutical and biomedical applications including cartilage regeneration. Pectin itself cannot be employed as scaffolds for tissue engineering since it decomposes quickly. This article discusses recent research and developments on pectin polysaccharide, including its types, origins, applications, and potential demands for use in AI-mediated scaffolds. It also covers the materials-design process, strategy for implementation to material selection and fabrication methods for evaluation. Finally, we discuss unmet requirements and current obstacles in the development of optimal materials for wound healing and bone-tissue regeneration, as well as emerging strategies in the field.

Application of ultrasound technology for the effective management of waste from fruit and vegetable

Food waste presents a continuous challenge for the food industry, leading to environmental pollution and economic issues. A substantial amount of waste, including by-products from fruits and vegetables, non-edible food items, and other waste materials, is produced throughout the food supply chain, from production to consumption. Recycling and valorizing waste from perishable goods is emerging as a key multidisciplinary approach within the circular bio-economy framework. This waste, rich in raw by-products, can be repurposed as a natural source of ingredients. Researchers increasingly focus on biomass valorization to extract and use components that add significant value. Traditional methods for extracting these bio-compounds typically require the use of solvents and are time-consuming, underscoring the need for innovative techniques like ultrasound (US) extraction. Wastes from the processing of fruits and vegetables in the food industry can be used to develop functional foods and edible coatings, offering protection against various environmental factors. This comprehensive review paper discusses the valorization of waste from perishable items like fruits and vegetables using US technology, not only to extract valuable components from waste but also to treat wastewater in the beverage industry. It also covers the application of biomolecules recovered from this process in the development of functional foods and packaging.

Physicochemical, structural, and functional characterization of pectin extracted from quince and pomegranate peel: A comparative study

Pectin's physicochemical, structural, and functional characteristics vary widely depending on the source of extraction. In this study, pectins were extracted from seedless quince and pomegranate peel, and their physicochemical, structural, and functional properties were investigated. A Box-Behnken Design with three factors and three levels was applied to optimize the pectin extraction yield from each matrix. As a result, the best extraction yields for quince pectin (QP) and pomegranate peel pectin (PPP) were 11.44 and 12.08 % (w/w), respectively. Both extracted pectins exhibit a linear structure, with the homogalacturonan domain dominating the rhamnogalacturonan I. Both pectins are highly methyl-esterified (DM > 69 %) with a higher degree of acetylation for PPP than QP, with 12 and 8 %, respectively. Unlike QP, PPP has a narrow, homogenous distribution and greater molecular weight (120 kDa). Regarding functionality, 1 g of QP could retain 4.92 g of water, and both pectin emulsions were more stable at room temperature than at 4 °C. When the concentration of QP is increased, rheological measurements demonstrate that it exhibits pseudoplastic behavior. Finally, QP can be used as a thickener, whereas PPP can be utilized as starting material for chemical changes to create multifunctional pectins.

Novel edible films fabricated with HG-type pectin extracted from different types of hybrid citrus peels: Effects of pectin composition on film properties

This study investigated the valorization of novel HG-type hybrid citrus pectins derived from three cultivars: Setoka (ST), Kanpei (KP), and Shiranui (SH), and their application as packaging materials. The physicochemical properties of these pectins and their corresponding films were evaluated and compared to commercial citrus pectin. Significant variations were observed in pectin yield (18.15-24.12 %) and other physicochemical characteristics, such as degree of esterification (DE), degree of methoxylation (DM), and monosaccharide composition, among the different cultivars. All hybrid citrus pectins were classified as high-methoxy pectin types (66.67-72.89 %) with typical structural configurations like commercial citrus pectin. However, hybrid citrus pectin films exhibited superior physical properties, including higher mechanical strength, flexibility, and lower water solubility than commercial citrus pectin film, while maintaining similar transparency and moisture content. Additionally, the films displayed smooth and uniform surface morphology, confirming their excellent film-forming properties. Correlation analysis revealed that DE positively influenced mechanical properties (r = 1.0). Furthermore, the monosaccharide composition of pectins showed strong relationships (r = 0.8-1.0) with the film's mechanical and barrier properties. These findings highlight the potential of hybrid citrus pectin as potential packaging material, and the knowledge of the structure-function relationship obtained in this study could be useful for the tailored modification of citrus pectin-based packages.

Comparisons of pulsed ultrasound-assisted and hot-acid extraction methods for pectin extraction under dual acid mixtures from onion (Allium cepa L.) waste

The aim of this study is to compare the physicochemical properties and yields of pectins extracted from onion waste under hot acid (HAE) and pulsed ultrasound-assisted extraction (PUAE) methods using different organic-inorganic acids, their mixtures, and pure water. The extraction temperature for experiments carried out under HAE was kept at 90°C for 90 min, whereas PUAE experiments were accomplished at RT in 15 min. In general, HAE gave better pectin yields compared with PUAE due to the significance of the increasing extraction temperature for the release of pectin from the plant matrix. While the maximum pectin yield from onion waste was 16.22% for HAE, the highest yield for PUAE was 9.83%. PUAE provides less time- and energy-consuming extraction of pectin within 15 min and thus seems to be more economic compared with the HAE. According to the physicochemical properties (equivalent weight (EW), degree of esterification (DE), methoxyl (MeO), and galacturonic acid (Gal-A) contents) of obtained pectins, extracted pectins were mostly high methoxy pectin. While the DE and MeO values of pectins extracted in organic acid conditions under HAE were higher, these values were found to be higher for pectins extracted in inorganic acids under PUAE. For acid mixtures, the DE and MeO values of pectins under HAE were mostly found to be lower than those under PUAE. Sequential PUAE and HAE methods for the extraction of pectin from onion waste were also found to be useful in terms of obtaining higher yields and better physicochemical properties. The highest pectin yield was 20.32% for the sequential PUAE and HAE methods. FT-IR analyses of the extracted pectins by both HAE and PUAE methods showed similar vibration bands compared with those of commercial citrus pectin.

Towards Valorization of Food-Waste-Derived Pectin: Recent Advances on Their Characterization and Application

Pectin, a natural biopolymer, can be extracted from food waste biomass, adding value to raw materials. Currently, commercial pectin is mostly extracted from citrus peels (85.5%) and apple pomace (14.0%), with a small segment from sugar beet pulp (0.5%). However, driven by high market demand (expected to reach 2.12 billion by 2030), alternative agro-industrial waste is gaining attention as potential pectin sources. This review summarizes the recent advances in characterizing pectin from both conventional and emerging food waste sources. The focus is the chemical properties that affect their applications, such as the degree of esterification, the neutral sugars' composition, the molecular weight, the galacturonic acid content, and technological-functional properties. The review also highlights recent updates in nutraceutical and food applications, considering the potential use of pectin as an encapsulating agent for intestinal targeting, a sustainable biopolymer for food packaging, and a functional and emulsifying agent in low-calorie products. It is clear from the considered literature that further studies are needed concerning the complexity of the pectin structure extracted from emerging food waste raw materials, in order to elucidate their most suitable commercial application.

Spectroscopic Analyses Highlight Plant Biostimulant Effects of Baker's Yeast Vinasse and Selenium on Cabbage through Foliar Fertilization

The main aim of this study is to find relevant analytic fingerprints for plants' structural characterization using spectroscopic techniques and thermogravimetric analyses (TGAs) as alternative methods, particularized on cabbage treated with selenium-baker's yeast vinasse formulation (Se-VF) included in a foliar fertilizer formula. The hypothesis investigated is that Se-VF will induce significant structural changes compared with the control, analytically confirming the biofortification of selenium-enriched cabbage as a nutritive vegetable, and particularly the plant biostimulant effects of the applied Se-VF formulation on cabbage grown in the field. The TGA evidenced a structural transformation of the molecular building blocks in the treated cabbage leaves. The ash residues increased after treatment, suggesting increased mineral accumulation in leaves. X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) evidenced a pectin-Iα-cellulose structure of cabbage that correlated with each other in terms of leaf crystallinity. FTIR analysis suggested the accumulation of unesterified pectin and possibly (seleno) glucosinolates and an increased network of hydrogen bonds. The treatment with Se-VF formulation induced a significant increase in the soluble fibers of the inner leaves, accompanied by a decrease in the insoluble fibers. The ratio of soluble/insoluble fibers correlated with the crystallinity determined by XRD and with the FTIR data. The employed analytic techniques can find practical applications as fast methods in studies of the effects of new agrotechnical practices, while in our particular case study, they revealed effects specific to plant biostimulants of the Se-VF formulation treatment: enhanced mineral utilization and improved quality traits.

Functional Characterization and Toxicity of Pectin from Red Chilto Fruit Waste (Peels)

BACKGROUND

Food and agricultural wastes constitute a rich source of functional ingredients for the food, pharmaceutical, and cosmetic industries. In this context, by-products from the red variety of Solanum betaceum fruits (chilto) from Northwestern Argentina are suitable sources for pectin extraction.

METHODS

In this study, pectin from the peels of red chilto fruits was extracted and characterized.

RESULTS

The recovery yield of red chilto peel pectin was about 24%, and it was co-extracted with 40.0 mg phenolic compounds, 6.5 mg anthocyanins, and 4.7 g proteins per 100 g of pectin. The pectin obtained from red chilto showed proper technological functionality displaying water and oil holding capacities of 4.2 and 2.0%, respectively, an emulsifying capacity of 83%, emulsion stability of 87.5%, foaming capacity of 21.1%, and foaming stability of 79.1%. The pectin displayed antioxidant activity with the ability to scavenge ABTS radical, superoxide anion, and H₂O₂. The polysaccharide exhibited in vitro hypoglycemic potential and inhibited the α-amylase enzyme, retarded glucose diffusion, and improved the cellular uptake of glucose in a Saccharomyces cerevisiae model. The extract was non-toxic on acute toxicity tests.

CONCLUSIONS

Red chilto pectin showed potential as a new and safe functional ingredient for the design of foods, health products, and cosmetics.

Exploring the effect of utilising organic acid solutions in ultrasound-assisted extraction of pectin from apple pomace, and its potential for biomedical purposes

Biomass resulting from food production represents valuable material to recover different biomolecules. In our study, we used apple pomace to obtain pectin, which is traditionally extracted using mineral acids. Our hypothesis consisted of carrying out extractions with organic acids, assisted by ultrasound, by varying processing parameters including time, temperature, and type of acid. The analytical determinations of galacturonic acid content, methoxylation and esterification degree, ζ-potential and extraction yield were used as pectin quality indicators. Pectins extracted using treatment conditions with better performance were assessed biologically in vitro for their potential to be used in biomedical applications. Overall, the extracted pectin presented a galacturonic acid content, methoxylation and esterification degree ranged from 19.7 to 67%, 26.8-41.4% and 58-65.2% respectively, and were negatively charged (-24.1 to -13.2 mV). It was found that factors of time and temperature greatly influenced the response variables excepting the esterification degree, while the acid type influenced the ζ-potential, methoxylation and esterification degrees. Additionally, it was seen that the longer extraction time (50 min) and higher temperature (50 °C) exhibited the better extraction yield (∼10.9%). Finally, the selected pectin showed high cytocompatibility up to 500 μg/mL of concentration when seeded with Neonatal Normal Human Dermal Fibroblasts.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

Valorization of polyphenolic compounds from food industry by-products for application in polysaccharide-based nanoparticles

In the last decades, evidence has indicated the beneficial properties of dietary polyphenols. In vitro and in vivo studies support that the regular intake of these compounds may be a strategy to reduce the risks of some chronic non-communicable diseases. Despite their beneficial properties, they are poorly bioavailable compounds. Thus, the main objective of this review is to explore how nanotechnology improves human health while reducing environmental impacts with the sustainable use of vegetable residues, from extraction to the development of functional foods and supplements. This extensive literature review discusses different studies based on the application of nanotechnology to stabilize polyphenolic compounds and maintain their physical-chemical stability. Food industries commonly generate a significant amount of solid waste. Exploring the bioactive compounds of solid waste has been considered a sustainable strategy in line with emerging global sustainability needs. Nanotechnology can be an efficient tool to overcome the challenge of molecular instability, especially using polysaccharides such as pectin as assembling material. Complex polysaccharides are biomaterials that can be extracted from citrus and apple peels (from the juice industries) and constitute promising wall material stabilizing chemically sensitive compounds. Pectin is an excellent biomaterial to form nanostructures, as it has low toxicity, is biocompatible, and is resistant to human enzymes. The potential extraction of polyphenols and polysaccharides from residues and their inclusion in food supplements may be a possible application to reduce environmental impacts and constitutes an approach for effectively including bioactive compounds in the human diet. Extracting polyphenolics from industrial waste and using nanotechnology may be feasible to add value to food by-products, reduce impacts on nature and preserve the properties of these compounds.

A Review on the Potential Bioactive Components in Fruits and Vegetable Wastes as Value-Added Products in the Food Industry

The food production industry is a significant contributor to the generation of millions of tonnes of waste every day. With the increasing public concern about waste production, utilizing the waste generated from popular fruits and vegetables, which are rich in high-added-value compounds, has become a focal point. By efficiently utilizing food waste, such as waste from the fruit and vegetable industries, we can adopt a sustainable consumption and production pattern that aligns with the Sustainable Development Goals (SDGs). This paper provides an overview of the high-added-value compounds derived from fruit and vegetable waste and their sources. The inclusion of bioactive compounds with antioxidant, antimicrobial, and antibrowning properties can enhance the quality of materials due to the high phenolic content present in them. Waste materials such as peels, seeds, kernels, and pomace are also actively employed as adsorbents, natural colorants, indicators, and enzymes in the food industry. Therefore, this article compiles all consumer-applicable uses of fruit and vegetable waste into a single document.

Thermosonication Applied to Kiwi Peel: Impact on Nutritional and Microbiological Indicators

The peels of many fruits are rich sources of nutrients, although they are not commonly consumed. If they are properly decontaminated, they can be used as healthy food ingredients reducing food waste. The objective was to apply thermosonication processes to kiwi peel and evaluate the impact on Listeria innocua survival (a non-pathogenic surrogate of L. monocytogenes) and key nutrients and quality indicators: proteins, fibers, minerals (Ca, K, Mg, Na, and P), chlorophylls, and phenolic contents. Kiwi peels were artificially inoculated with L. innocua and thermal and thermosonication treatments were performed at 55 °C and 60 °C for 30 and 15 min maximum, respectively. Bacteria were enumerated through treatment time, and quality indicators were assessed before and at the end of treatments. A Weibull model with a decimal reduction time (D-value) was successfully used in L. innocua survival data fits. Results showed that coupling temperature to ultrasound had a synergistic effect on bacteria inactivation with significant decreases in D-values. Thermosonication at 60 °C was the most effective in terms of protein, fiber, chlorophylls, and phenolics retention. Minerals were not significantly affected by all treatments. Applying thermosonication to kiwi peel was more effective for decontamination than thermal treatments at the same temperature while allowing the retention of healthy compounds.

A Comprehensive Overview of Tomato Processing By-Product Valorization by Conventional Methods versus Emerging Technologies

The tomato processing industry can be considered one of the most widespread food manufacturing industries all over the world, annually generating considerable quantities of residue and determining disposal issues associated not only with the wasting of invaluable resources but also with the rise of significant environmental burdens. In this regard, previous studies have widely ascertained that tomato by-products are still rich in valuable compounds, which, once recovered, could be utilized in different industrial sectors. Currently, conventional solvent extraction is the most widely used method for the recovery of these compounds from tomato pomace. Nevertheless, several well-known drawbacks derive from this process, including the use of large quantities of solvents and the difficulties of utilizing the residual biomass. To overcome these limitations, the recent advances in extraction techniques, including the modification of the process configuration and the use of complementary novel methods to modify or destroy vegetable cells, have greatly and effectively influenced the recovery of different compounds from plant matrices. This review contributes a comprehensive overview on the valorization of tomato processing by-products with a specific focus on the use of "green technologies", including high-pressure homogenization (HPH), pulsed electric fields (PEF), supercritical fluid (SFE-CO₂), ultrasounds (UAE), and microwaves (MAE), suitable to enhancing the extractability of target compounds while reducing the solvent requirement and shortening the extraction time. The effects of conventional processes and the application of green technologies are critically analyzed, and their effectiveness on the recovery of lycopene, polyphenols, cutin, pectin, oil, and proteins from tomato residues is discussed, focusing on their strengths, drawbacks, and critical factors that contribute to maximizing the extraction yields of the target compounds. Moreover, to follow the "near zero discharge concept", the utilization of a cascade approach to recover different valuable compounds and the exploitation of the residual biomass for biogas generation are also pointed out.

Novel zero waste tactics for commercial vegetables – recent advances

Commercial vegetables include tomatoes, potatoes, onions, and eggplant due to their surplus production, availability, and affordability. The valorisation of the massive wastage of commercial vegetables and providing a long-term solution has been challenging. The review addresses the implications of biowastes on the environment and fosters the recent investigations into valorising commercial vegetable waste to develop multiple value-added products. It discussed the outcomes of the multiple technologies, majorly on green chemistry extraction, while outlining other methods such as fermentation, enzymatic treatments, 3D printing foods, high-pressure homogenisation, microencapsulation, bio-absorption method, and pyrolysis for their respective vegetable wastes. Agri-residues can be a valuable source for formulating functional ingredients, natural additives, biodiesel, dyes, and animal feed. This comprehensive review proposes a strategy to upcycle low-cost biowaste to boost the economic and ecological benefits. The current review captures the interests and great collaborations between researchers, industrialists, policymakers, waste management bodies, and eco-activists.

Recovery of Antioxidants from Tomato Seed Industrial Wastes by Microwave-Assisted and Ultrasound-Assisted Extraction

Tomato seed (TS) wastes are obtained in large amounts from the tomato processing industry. In this work, microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) of antioxidant compounds from TS were optimized by using response surface methodology. The effect of MAE and UAE main extraction parameters was studied on total phenolic content (TPC) and antioxidant activity (DPPH) responses. Antioxidant, structural, morphological, and thermal properties of MAE and UAE extracts were evaluated. A great influence of ethanol concentration was observed in both extraction methods. Optimal MAE conditions were determined as 15 min, 80 °C, 63% ethanol and 80 mL, with a desirability value of 0.914, whereas 15 min, 61% ethanol and 85% amplitude (desirability = 0.952) were found as optimal conditions for UAE. MAE extracts exhibited higher TPC and antioxidant activity values compared to UAE (1.72 ± 0.04 and 1.61 ± 0.03 mg GAE g TS⁻¹ for MAE and UAE, respectively). Thermogravimetric analysis (TGA) results suggested the presence of some high molecular weight compounds in UAE extracts. Chlorogenic acid, rutin and naringenin were identified and quantified by HPLC-DAD-MS as the main polyphenols found by MAE and UAE, showing MAE extracts higher individual phenolics content (1.11–2.99 mg 100 g TS⁻¹). MAE and UAE have shown as effective green techniques for extracting bioactive molecules with high antioxidant activity from TS with high potential to be scaled-up for valorizing of TS industrial wastes.

Production of biopolymers from food waste: Constrains and perspectives

Food is an essential commodity for the survival of any form of life on earth. Yet generation of plethora of food waste has significantly elevated the global concern for food scarcity, human and environment deterioration. Also, increasing use of polymers derived from petroleum hydrocarbons has elevated the concerns towards the depletion of this non-renewable resource. In this review, the use of waste food for the production of bio-polymers and their associated challenges has been thoroughly investigated using scientometric analysis. Various categories of food waste including fruit, vegetable, and oily waste can be employed for the production of different biopolymers including polyhydroxyalkanoates, starch, cellulose, collagen and others. The advances in the production of biopolymers through chemical, microbial or enzymatic process that increases the acceptability of these biopolymers has been reviewed. The comprehensive compiled information may assist researchers for addressing and solving the issues pertaining to food wastage and fossil fuel depletion.

Characterization of Pectin from Grape Pomace: A Comparison of Conventional and Pulsed Ultrasound-Assisted Extraction Techniques

The yield, physicochemical and rheological parameters of grape pomace pectin (Fetească Neagră and Rară Neagră) obtained by conventional extraction (CE) were compared to those acquired by pulsed ultrasound-assisted extraction (PUAE). Extraction temperature (70–90 °C), pH (1–3) and time (1–3 h) were considered as independent variables for CE, while amplitude (20–100%), pH (1–3) and time (20–60 min) for PUAE. The optimal conditions for maximum yield and physicochemical parameters of pectin samples extracted by CE were temperature of 90 °C, pH 1.9 for 164 min (9.96% yield, 79.91 g/100 g of galacturonic acid (GalA) content, 81.28% of degree of esterification (DE) and 5.52 × 10⁴ g/mol of molecular weight (M_w) for Fetească Neagră (FN) pectin; 11.08% yield, 80.05 g/100 g of GalA content, 80.86% of DE and 5.59 × 10⁴ g/mol of M_w for Rară Neagră (RN) pectin), while for PUAE they were amplitude of 100%, pH 1.8 for 60 min (8.83% yield, 80.24 g/100 g of GalA content, 81.07% of DE and 4.19 × 10⁴ g/mol of M_w for FN pectin; 8.94% yield, 78.64 g/100 g of GalA content, 80.04% of DE and 4.23 × 10⁴ g/mol of M_w for RN pectin). The yield and physicochemical parameters of CE pectin were higher than PUAE pectin. The FT-IR spectra of pectin samples revealed the occurrence of polysaccharide compound, while rheology characteristics confirming its application in different food products.

High-Intensity Ultrasound-Assisted Extraction of Pectin from Mango Wastes at Different Maturity

Valorisation of food processing by-products is a welcome and developing area. The mango processing industry produces 40% to 60% of the fruit as solid waste, in which components of industrial interest, such as pectin, are lost. This study reports on energy-efficient high-intensity ultrasound-assisted extraction (HIUAE) to extract pectin from mango peels. The analysis considered the ripening stage of the fruit (0, 2, and 4), HIUAE frequency (37 kHz and 80 kHz), and extraction time (20 min, 25 min, and 30 min). Extractions of pectin from mango peels with HIUAE have been fairly studied. However, this work differs from those studies in including mango maturity grade as a factor. Pectin extraction yields ranged from 13% to 30%, with no influence (p > 0.05) of time, and the highest yields were obtained at the lowest maturity stage (0) and lowest frequency (37 kHz). This latest condition (37 kHz) also yielded pectin with the highest gel strength, purity, and quality. This work demonstrated that the mango maturity stage influenced pectin extraction yield. Ultrasound-assisted extraction of pectin from mango peels could be an efficient approach toward waste valorisation and extraction of pectin with high yield and good quality attributes for the food industry.

Chain conformations and steady-shear viscosity properties of pectic polysaccharides from apple and tomato

In this study, apple pectin (AP) and tomato pectin (TP) were demonstrated to be a high-ester (74.8%) polysaccharide with the weight-average molecular weight (Mw ) of ∼ 243 kDa and a low-ester (45.9%) polysaccharide with the Mw of ∼ 19 kDa, respectively. The semi-rigid chain conformations of pectic polysaccharides in NaNO3 aqueous solution were deduced according to the Smidsrød "B values" of AP (0.025) and TP (0.029), while AP and TP exhibited higher stiffness in water due to the electric repulsion of carboxyl groups, which was visually observed by AFM images. Under steady shear, the shear-thickening behaviors of AP and TP in NaNO3 aqueous solutions were observed in the shear rate range of < 1 s-1, which were attributed to the disruption of the ordered arrangement induced by semi-rigid pectin chains into randomly entangled structure by weak shear force. AP exhibited stronger shear-thickening behavior due to the formation of more entanglements resulted from the higher Mw and longer side chains highly branched at rhamngalacturonan region. This study provides the scientific basis for the construction of the relationship of steady-shear property with chain conformation and molecular weight of pectin.

Valorization Potential of Tomato (Solanum lycopersicum L.) Seed: Nutraceutical Quality, Food Properties, Safety Aspects, and Application as a Health-Promoting Ingredient in Foods

The tomato is a member of the Solanaceae family and is a crop that is widely cultivated around the world due to its sweet, sour, salty, juicy, and nutritious berries. The processing of tomatoes generates a significant amount of waste in the form of tomato pomace, which includes seeds and skin. Tomato seeds are reservoirs of various nutrients, such as proteins, carbohydrates, lipids, minerals, and vitamins. These components make tomato seeds an important ingredient for application in food matrices. This review discusses the functional food properties of tomato seeds and their scope of utilization as major ingredients in the functional food industry. In addition, this review describes the development of tomato seeds as a potential nutritional and nutraceutical ingredient, along with recent updates on research conducted worldwide. This is the first review that demonstrates the nutritional profile of tomato seeds along with its diverse functional food properties and application as a functional food ingredient.

Challenges and solutions of extracting value-added ingredients from fruit and vegetable by-products: a review

Every year, huge amounts of fruit and vegetable by-products in the food processing factories are produced. These by-products have great potential to be used for different targets especially the extraction of value-added ingredients. The target of this study is to review the challenges of extraction of value-added ingredients from fruit and vegetable by-products on the industrial scale and to describe current trends in solving these problems. In addition, some strategies such as multi-component extraction as well as application of fermentation before or after the extraction process, and production of biofuel, organic fertilizers, animal feeds, etc. on final residues after extraction of value-added ingredients are discussed in this review paper. In fact, simultaneous extraction of different value-added ingredients from fruit and vegetable by-products can increase the extraction efficiency and reduce the cost of value-added ingredients as well as the final volume of these by-products. After extraction of value-added ingredients, the residues can be used to produce biofuels, or they can be used to produce organic fertilizers, animal feeds, etc. Therefore, the application of several appropriate strategies to treat the fruit and vegetable by-products can increase their application, protect the environment, and improve the food economy.

Effect of Ultrasound-Assisted, Microwave-Assisted and Ultrasound-Microwave-Assisted Extraction on Pectin Extraction from Industrial Tomato Waste

This work aimed to study the effect of ultrasound-assisted (UAE), microwave-assisted (MAE), and ultrasound-microwave-assisted (UMAE) methods for pectin extraction from industrial tomato waste. The overall performance index from the fuzzy analytical method with three criteria, pectin yield, galacturonic acid, and lycopene content, was applied to evaluate the best extraction conditions by using the weight of 75, 20, and 5, respectively. The UAE conditions was performed at a temperature of 80 °C for 20 min with the variations in the extraction pH and the solid liquid (SL) ratio. The best UAE conditions with high pectin yield, and high total carboxyl group, as well as a lycopene content, was the pH of 1.5 and the SL ratio of 1:30. The MAE conditions was performed with variations in the microwave powers and times. The results showed that the best MAE conditions were 300 W for 10 min, which gave high pectin yield with high galacturonic acid and lycopene content. Various conditions of UMAE at the best conditions of MAE and UAE were performed and exhibited that the UAE had more positively affected the pectin yield. However, the FTIR spectra of obtained pectins from different extraction techniques showed a similar pectin structure.

Effect of Extraction Procedures with Ultrasound and Cellulolytic Enzymes on the Structural and Functional Properties of Citrus grandis Osbeck Seed Mucilage

The structural and functional properties of Citrus grandis Osbeck (CGO) seed mucilage by different extraction practices, including conventional citrate buffer, ultrasonic-assisted (UAE), enzymatic-assisted extraction (EAE) with cellulase or Celluclast® 1.5 L and various ultrasonic-assisted enzymatic extraction (UAEE) procedures were investigated. It was found that CGO seed from agricultural and processing byproducts is an excellent new source of high methoxyl pectin with quite high intrinsic viscosity (about 108.64 dL/g) and molecular weight (about 1.9 × 106) as compared with other pectin sources. UAEE with Celluclast® 1.5 L enhanced the extraction yield most pronouncedly (about 2.3 times). Moreover, the monosaccharide composition of CGO seed mucilage is least affected by EAE with Celluclast® 1.5 L. In contrast, EAE with cellulase dramatically reduces the galacturonic acid (GalA) content to less than 60 molar%, and increases the glucose (Glc) content pronouncedly (to about 40 molar%), which may be considered as an adverse effect in terms of pectin purity. Though extraction procedures involved with ultrasound and cellulolytic enzymes generally show a decrease in GalA contents, weight average molar mass and intrinsic viscosity, EAE with Celluclast® 1.5 L is least affected, followed by UAE and UAEE with Celluclast® 1.5 L. These features can be leveraged in favor of diversified applications.