Physical and antimicrobial properties of thyme oil emulsions stabilized by ovalbumin and gum arabic

Physicochemical Characterization, Rheological Properties, and Antimicrobial Activity of Sodium Alginate-Pink Pepper Essential Oil (PPEO) Nanoemulsions

Essential oils (EOs) have antimicrobial properties, but their low solubility in water and strong flavor pose challenges for direct incorporation into food, as they can negatively impact organoleptic properties. To overcome these issues, strategies such as oil-in-water (O/W) nanoemulsions have been developed to improve EO dispersion and protection while enhancing antimicrobial efficacy. The objective of this study was to create sodium alginate-pink pepper essential oil (PPEO) nanoemulsions using microfluidization. Various formulations were assessed for physicochemical, physical, and antimicrobial properties to evaluate their potential in food applications. The microfluidized emulsions and nanoemulsions had droplet sizes ranging from 160 to 443 nm, polydispersity index (PdI) ranging from 0.273 to 0.638, and zeta potential (ζ) ranging from -45.2 to 66.3 mV. The nanoemulsions exhibited Newtonian behavior and remarkable stability after 20 days of storage. Antimicrobial testing revealed effectiveness against Staphylococcus aureus and Listeria monocytogenes, with minimum inhibitory concentrations (MIC) of 200 µg/mL for both microorganisms and minimum bactericidal concentrations (MBC) of 800 µg/mL and 400 µg/mL, respectively, proving that encapsulation of PPEO in nanoemulsions significantly increased its antibacterial activity. These results present the possibility of using PPEO nanoemulsions as a more effective natural alternative to synthetic preservatives in food systems.

Chitosan-Oxidized Pullulan Hydrogels Loaded with Essential Clove Oil: Synthesis, Characterization, Antioxidant and Antimicrobial Properties

Emulsion hydrogels are promising materials for encapsulating and stabilizing high amounts of hydrophobic essential oils in hydrophilic matrices. In this work, clove oil-loaded hydrogels (CS/OP-C) are synthesized by combining covalent and physical cross-linking approaches. First, clove oil (CO) was emulsified and stabilized in a chitosan (CS) solution, which was further hardened by Schiff base covalent cross-linking with oxidized pullulan (OP). Second, the hydrogels were subjected to freeze-thaw cycles and, as a result, the clove oil was stabilized in physically cross-linked polymeric walls. Moreover, due to cryogelation, the obtained hydrogels exhibited sponge-like porous interconnected morphology (160-250 µm). By varying the clove oil content in the starting emulsion and the degree of cross-linking, the hydrogels displayed a high water retention capacity (swelling ratios between 1300 and 2000%), excellent elastic properties with fast shape recovery (20 s) after 70% compression, and controlled in vitro clove oil release in simulated skin conditions for 360 h. Furthermore, the prepared clove oil-loaded hydrogels had a strong scavenging activity of 83% and antibacterial and antifungal properties, showing a bacteriostatic effect after 48 and 72 h against S. aureus and E. coli. Our results recommend the new clove oil-embedded emulsion hydrogels as promising future materials for application as wound dressings.

Development and evaluation of eco-friendly carvacrol nanoemulsion as a sustainable biopesticide against bacterial leaf blight of cluster bean

BACKGROUND

The study of carvacrol plant antibacterial components has recently become a hot topic in modern farming. Carvacrol industrial applications are restricted by their physicochemical instability and partial solubility in water. In the present study, an ultrasonic emulsification method was used to prepare a carvacrol nanoemulsion (CAR-NE) employing nonionic surfactants. The CAR-NE was characterized using a dynamic light scattering (DLS) instrument and transmission electron microscopy (TEM). The goal of this work was nanoencapsulation of carvacrol to improve its aqueous solubility and preservation of the encapsulated compound against climatic conditions. Another aim of the present study was the evaluation of the growth-promoting effects and antibacterial potential of CAR-NE against bacterial leaf blight of cluster bean.

RESULTS

CAR-NE showed a hydrodynamic diameter, ZP and PDI index of 43.88 ± 4.30 nm, -47.8 ± 0.23 mV and 0.246 ± 0.04, respectively. The spherical shape morphology of CAR-NE was confirmed by TEM imaging. Minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) of the CAR-NE were 20 and 160 μL mL-1 (respectively) against Xanthomonas axonopodis pv. cyamopsidis. Additionally, the antibacterial potential of CAR-NE was evaluated for controlling bacterial blight of cluster bean in fields. The disease severity in the negative control plants (water) was 84%, but that in the CAR-NE 160 (μL mL-1 ) was remarkably low at 14%, nearly the same as the positive control (streptomycin sulfate).

CONCLUSION

The shelf-life of CAR-NE was 2 months at room temperature without any appreciable changes in hydrodynamic diameter and zeta potential. Consequently, plants treated with CAR-NE 160 showed substantial improvement in plant growth. © 2023 Society of Chemical Industry.

Potential Application of Ovalbumin Gel Nanoparticles Loaded with Carvacrol in the Preservation of Fresh Pork

Plant essential oil has attracted much attention in delaying pork spoilage due to its safety, but its low antibacterial efficiency needs to be solved by encapsulation. Our previous research had fabricated a type of ovalbumin gel nanoparticles loaded with carvacrol (OCGn-2) using the gel-embedding method, which had a high encapsulation rate and antibacterial activity. The main purpose of this study was to further evaluate the stability and slow-release characteristics of OCGn-2 and potential quality effects of the nanoparticles on the preservation of fresh pork pieces during 4 °C storage. The particle test showed that the nanoparticles had better heat stability below 85 °C and salt stability below 90 mM. The in vitro release study indicated that the carvacrol in OCGn-2 followed a Fickian release mechanism. The pork preservation test suggested that the OCGn-2 coating treatments could remarkably restrict the quality decay of pork slices compared to free carvacrol or a physical mixture of ovalbumin and carvacrol treatment. Nano-encapsulation of ovalbumin is beneficial to the sustained release, enhanced oxidation resistance, and improved antibacterial activity of carvacrol. The study suggested that ovalbumin gel nanoparticles embedded with carvacrol could be applied as an efficient bacterial active packaging to extend the storage life of pork.

Pickering emulsions stabilized by soybean protein isolate/chitosan hydrochloride complex and their applications in essential oil delivery

In this work, fabrication of soybean protein isolate (SPI)/chitosan hydrochloride (CHC) composite particles stabilized O/W Pickering emulsions using soybean oil as an oil phase was optimized by examining the effects of pH, SPI/CHC mass ratio, SPI/CHC composite particle concentration and oil phase fraction on the stability of the emulsions. The results showed that under the conditions of SPI/CHC mass ratio 1:1, pH 4 and particle concentration 2 %, the SPI/CHC composite particles could stabilize the emulsions with oil phase fraction up to 80 %. At an oil phase fraction of 60 %, the emulsions had a minimum particle size. The microstructure, storage and oxidation stabilities and rheological properties of the emulsions were determined. Using this SPI/CHC composite particle-stabilized Pickering emulsion template, citrus essential oil (CEO) Pickering emulsion (CEOP) was prepared. CEOP was found to markedly inhibit two food-related microorganisms, Staphylococcus aureus and Escherichia coli. In addition, the CEOP emulsion dilution (containing 4500 μL CEO/L) not only improved the water solubility of CEO, but also effectively retarded the browning and bacterial growth of fresh-cut apple. The SPI/CHC-stabilized Pickering emulsion template constructed in this work provides a promising alternative for the delivery of antimicrobial essential oils in the food industry.

Stabilization of Essential Oil: Polysaccharide-Based Drug Delivery System with Plant-like Structure Based on Biomimetic Concept

Essential oils (EOs) have stability problems, including volatility, oxidation, photosensitivity, heat sensitivity, humidity sensitivity, pH sensitivity, and ion sensitivity. A drug delivery system is an effective way to stabilize EOs, especially due to the protective effect of polymeric drug carriers. Polysaccharides are frequently employed as drug carrier materials because they are highly safe, come in a variety of forms, and have plentiful sources. Interestingly, the EO drug delivery system is based on the biomimetic concept since it corresponds to the structure of plant tissue. In this paper, we associate the biomimetic plant-like structures of the EO drug delivery system with the natural forms of EO in plant tissues, and summarize the characteristics of polysaccharide-based drug carriers for EO protection. Thus, we highlight the research progress on polysaccharides and their modified materials, including gum arabic, starch, cellulose, chitosan, sodium alginate, pectin, and pullulan, and their use as biomimetic drug carriers for EO preparations due to their abilities and potential for EO protection.

Exploring the influence of ultrasound on the antibacterial emulsification stability of lysozyme-oregano essential oil

A lysozyme-oregano essential oil (Lys-OEO) antibacterial emulsion was developed via ultrasonic treatment. Based on the general emulsion materials of ovalbumin (OVA) and inulin (IN), the addition of Lys and OEO successfully inhibited the growth of E. coli and S. aureus, two representatives of which were Gram-negative and Gram-positive bacteria respectively. The emulsion system in this study was designed to compensate for the limitation that Lys could only act on Gram-positive bacteria, and the stability of the emulsion was improved using ultrasonic treatment. The optimal amounts among OVA, Lys and OEO were found to be the mass ratio of 1:1 (Lys to OVA) and 20% (w/w) OEO. The ultrasonic treatment at the power of 200, 400, 600, and 800 W and time length of 10 min improved the stability of emulsion, in which the surface tension was below 6.04 mN/m and the Turbiscan stability index (TSI) did not exceed 10. The multiple light scattering showed that sonicated emulsions were less prone to delamination; salt stability and pH stability of emulsions were improved, CLSM image showed emulsion as oil-in-water type. In the meantime, the particles of the emulsions were found to become smaller and more uniform with ultrasonic treatment. The best dispersion and stability of the emulsion were both achieved at 600 W with a zeta potential of 7.7 mV, the smallest particle size and the most uniform particle distribution.

Impact of Geraniol and Geraniol Nanoemulsions on Botrytis cinerea and Effect of Geraniol on Cucumber Plants’ Metabolic Profile Analyzed by LC-QTOF-MS

In the present study, the bioactive substance geraniol was tested in vitro and in planta against B. cinerea on cucumber plants, and the changes in the metabolic profile of cucumber plants inoculated with the pathogen and/or treated with geraniol were monitored by a novel LC-QTOF-MS method employing target and suspect screening. The aforementioned treatments were also studied for their impact on membrane lipid peroxidation calculated as malondialdehyde (MDA) content. Additionally, geraniol-loaded nanoemulsions (GNEs) were synthesized and tested against B. cinerea as an integrated formulation mode of geraniol application. The EC₅₀ values calculated for geraniol and GNEs against B. cinerea were calculated at 235 μg/mL and 105 μg/mL, respectively. The in planta experiment on cucumber plants demonstrated the ability of geraniol and GNEs to significantly inhibit B. cinerea under greenhouse conditions. The LC-QTOF-MS analysis of the metabolic profile of the cucumber plants treated with geraniol demonstrated an increase in the concentration levels of myricetin, chlorogenic acid, and kaempferol rhamnoside, as compared to control plants and the presence of B. cinerea caused an increase in sinapic acid and genistein. These compounds are part of important biosynthetic pathways mostly related to responses against a pathogen attack.

Bioactive compounds: Application of albumin nanocarriers as delivery systems

Enriched products with bioactive compounds (BCs) show the capacity to produce a wide range of possible health effects. Most BCs are essentially hydrophobic and sensitive to environmental factors; so, encapsulation becomes a strategy to solve these problems. Many globular proteins have the intrinsic ability to bind, protect, encapsulate, and introduce BCs into nutraceutical or pharmaceutical matrices. Among them, albumins as human serum albumin (HSA), bovine serum albumin (BSA), ovalbumin (OVA) and α-lactalbumin (ALA) are widely abundant, available, and applied in many industrial sectors, becoming promissory materials to encapsulate BCs. Therefore, this review focuses on researches about the main groups of natural origin BCs (namely phenolic compounds, lipids, vitamins, and carotenoids), the different types of nanostructures based on albumins to encapsulate them and the main fields of application for BCs-loaded albumin systems. In this context, phenolic compounds (catechins, quercetin, and chrysin) are the most extensively BCs studied and encapsulated in albumin-based nanocarriers. Other extensively studied subgroups are stilbenes and curcuminoids. Regarding lipids and vitamins; terpenes, carotenoids (β-carotene), and xanthophylls (astaxanthin) are the most considered. The main application areas of BCs are related to their antitumor, anti-inflammatory, and antioxidant properties. Finally, BSA is the most used albumin to produced BCs-loaded nanocarriers.

Evaluation of filter media covered with spun fibres and containing thyme essential oil with antimicrobial properties

Inhalation of bioaerosols has been linked to many health problems. Filter media impregnated with antimicrobial material can provide effective removal and inactivation of bioaerosols. In this study, fibres were spun on a substrate by centrifugal spinning, obtaining filter media denoted 5THY and THY. Thyme essential oil was used as an antimicrobial agent. For 5THY, the thyme essential oil was added to the polyacrylonitrile (PAN) solution, while for THY, it was sprayed onto the medium after the fibres had been produced. The THY medium presented a higher collection efficiency, compared to the substrate or 5THY, with efficiencies of 99% for microparticles and 58% for nanoparticles. Using the plaque assay method, THY provided the highest reductions of the bacteria Escherichia coli and Staphylococcus aureus, with efficiency of 99.999%. The findings demonstrated that filter media covered with spun fibres and containing thyme essential oil provided excellent antimicrobial action and filtration performance.

Chemical Composition and Bioactivity of Essential Oil of Ten Labiatae Species

Using antibiotics as feed additives have been successively banned worldwide from 1986; therefore, it is an urgent task to finding safe and effective alternatives. As natural products of plant origin, essential oils (EOs) are an outstanding option due to their reported bioactivity. In this research, ten EOs of Labiatae species were extracted by steam distillation and its chemical constituents were identified by gas chromatography-mass spectrometry (GC-MS). A total of 123 chemical compounds, including alkenes, phenols, aldehydes and ketones, were identified. The results of antioxidant activity carried out through DPPH free radical scavenging (DPPH) and ferric reducing antioxidant power (FRAP), showing that EOs of Ocimum basilicum Linn. (ObEO), Thymus mongolicus Ronn. (TmEO), Origanum vulgare Linn. (OvEO) and Mosla chinensis Maxim. (McEO) have strong antioxidant activities. Their 50%-inhibitory concentration (IC₅₀) value was <1.00, 1.42, 1.47 and 1.92 μg/mL, respectively; and their FRAP value was 1536.67 ± 24.22, 271.84 ± 4.93, 633.71 ± 13.14 and 480.66 ± 29.90, respectively. The results of filter paper diffusion showing that McEO, OvEO and TmEO inhibition zone diameter (IZD) are all over 30 mm. The results of two-fold dilution method showed that McEO, OvEO and TmEO have strong antibacterial activities against Staphylococcus aureus (S. aureus) and their minimal inhibitory concentrations (MIC) value was 1 μL/mL, 2 μL/mL, and 2 μL/mL, respectively. In conclusion, the results in this work demonstrate the possibility for development and application of EOs as potential feed additives.

Essential oils microemulsions prepared with high-frequency ultrasound: physical properties and antimicrobial activity

Essential oils (EOs) have demonstrated antimicrobial activity against bacteria due to the effects of their major components. The direct application of EOs may present a rapid volatilization of its components and can decrease their effectiveness. Encapsulation by means of emulsification can provide protection to lipid compounds on a microscale. The aim of this study was to characterize microemulsions of cinnamon essential oil (CEO), oregano essential oil (OEO), and rosemary essential oil (REO) prepared by high-frequency ultrasound and evaluate their antimicrobial activities against Escherichia coli and Listeria monocytogenes. The microemulsions (oil-in-water, O/W) of EOs were prepared using high-frequency ultrasound, applying a wave amplitude of 84 µm for 15 min (REO and CEO) or 30 min (OEO). The antimicrobial activity was determined by inoculating 10⁸ CFU/mL of bacteria. Nonsurvival of the bacteria was confirmed by plate count in tryptic soy agar, determining the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC). The microemulsions exhibited droplet size diameters of 1.98 to 5.46 µm, showing high encapsulation efficiencies (79.91-81.97%) and low separation rates (2.50-6.67%). The MIC and MBC for the microemulsions for both bacteria were 20-75% less than values obtained for the non-encapsulated EOs. This study demonstrates that high-frequency ultrasound is a suitable technique for obtaining stable microemulsions to deliver natural antimicrobials that can be applied to control bacteria of high relevance in food safety.

Development of antibacterial nanoemulsions incorporating thyme oil: Layer-by-layer self-assembly of whey protein isolate and chitosan hydrochloride

The aim of this study was to develop a thyme oil emulsion with good physicochemical properties and antibacterial activity. Initially, oil-in-water emulsions containing whey protein-coated essential oil droplets were prepared by high-pressure homogenization. The double-layer emulsions were formed around the oil droplets by electrostatic deposition of cationic chitosan hydrochloride onto the anionic protein-coated droplets. Then, the structure, physicochemical properties, and storage stability of the emulsions were determined. Emulsions formulated using 1% v/v thyme oil, 0.7 wt% whey protein, and 0.25 wt% of chitosan hydrochloride contained relatively small cationic droplets. Moreover, the emulsions containing double-layer coatings were shear-thinning fluids. Storage tests indicated that double-layer emulsions had better stability than the single-layer. Antibacterial tests indicated that the double-layer emulsions exhibited prolonged antibacterial activity against two model food pathogens: E. coli and S. aureus. These results provide a scientific basis for the rational design of antimicrobial delivery systems for use in foods.

α-Cyclodextrins Polyrotaxane Loading Silver Sulfadiazine

As a drug carrier, polyrotaxane (PR) has been used for targeted delivery and sustained release of drugs, whereas silver sulfadiazine (SD-Ag) is an emerging antibiotic agent. PR was synthesized by the use of α-cyclodextrin (CD) and poly(ethylene glycol) (PEG), and a specific antibacterial material (PR-(SD-Ag)) was then prepared by loading SD-Ag onto PR with different mass ratios. The loading capacity and the encapsulation efficiency were 90% at a mass ratio of 1:1 of PR and SD-Ag. SD-Ag was released stably and slowly within 6 d in vitro, and its cumulative release reached more than 85%. The mechanism of PR loading SD-Ag might be that SD-Ag attached to the edge of α-CD through hydrogen bonding. PR-(SD-Ag) showed a higher light stability than SD-Ag and held excellent antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus).

Improving emulsion formation, stability and performance using mixed emulsifiers: A review

The formation, stability, and performance of oil-in-water emulsions may be improved by using combinations of two or more different emulsifiers, rather than an individual type. This article provides a review of the physicochemical basis for the ability of mixed emulsifiers to enhance emulsion properties. Initially, an overview of the most important physicochemical properties of emulsifiers is given, and then the nature of emulsifier interactions in solution and at interfaces is discussed. The impact of using mixed emulsifiers on the formation and stability of emulsions is then reviewed. Finally, the impact of using mixed emulsifiers on the functional performance of emulsifiers is given, including gastrointestinal fate, oxidative stability, antimicrobial activity, and release characteristics. This information should facilitate the selection of combinations of emulsifiers that will have improved performance in emulsion-based products.

Investigation into the physical stability of a eugenol nanoemulsion in the presence of a high content of triglyceride

Schematic stability mechanism of a eugenol emulsion in the presence of a high triglyceride content.