Reduction of off-flavours and the impact on the functionalities of lentil protein isolate by acetone, ethanol, and isopropanol treatments

Sunflower seed protein: defatting, structural characterization and property analysis

The preparation method and protein purity are crucial factors influencing the use of sunflower seed proteins in the food industry. In this study, sunflower seed press cake was defatted using subcritical butane, isopropyl alcohol and n-hexane, producing meal protein, protein concentrate, and protein isolate. A systematic analysis of the structural and functional properties of these proteins revealed that the subcritical butane and isopropyl alcohol extracted protein yield and color, protein structure was relatively loose, denaturation temperature was higher, the prepared sunflower seed protein solubility and other functional properties were better than traditional hexane extraction. Additionally, the protein isolate demonstrated superior solubility (46.38-52.34 %), emulsification stability (31.76-41.97 %), and oil holding capacity. The protein concentrate exhibited significant advantages in gel properties and water holding capacity. These findings supported the development of green, efficient, and sustainable methods for the optimal utilization of sunflower seed proteins at different purity levels.

Profiles of aroma volatile components in textured vegetable proteins using headspace solid phase microextraction-gas chromatography-mass spectrometry

Textured vegetable protein (TVP) is a significant alternative to meat, with its primary raw materials being soybeans, peas, rice, and wheat proteins. While advancements in technology have successfully replicated the unique texture of meat in plant-based proteins, research on the aroma profiles of these key raw materials remains limited. The subtle differences in aroma between meat and meat substitutes are yet to be fully addressed. In this study, we employed headspace solid-phase microextraction (HS-SPME) combined with gas chromatography-mass spectrometry (GC-MS), a specialized technique for the analysis of volatile aromatic compounds, to examine the volatile profiles of soybean, pea, rice, and wheat proteins. The identified volatile compounds included alcohols, aldehydes, carboxylic acids, ethers, furans, indoles, ketones, phenols, pyrans, and sulfur compounds. Based on prior research, eight compounds (hexanal, nonanal, 2-nonenal, 3-methylbutanal, benzaldehyde, 1-octen-3-ol, 3-octen-2-one, and 2-pentylfuran) were classified as off-flavors. Hexanal, a key marker, was found in the following order: rice showed the highest levels, followed by soybeans, peas, and wheat. Other major volatile components exhibited distinct ratios across the samples. These findings could assist in refining the next generation of TVPs and minimizing aroma heterogeneity.

A comprehensive review of processing, functionality, and potential applications of lentil proteins in the food industry

There is a pressing need for sustainable sources of proteins to address the escalating food demands of the expanding global population, without damaging the environment. Lentil proteins offer a more sustainable alternative to animal-derived proteins (such as those from meat, fish, eggs, or milk). They are abundant, affordable, protein rich, nutritious, and functional, which makes them highly appealing as ingredients in the food, personal care, cosmetics, pharmaceutical and other industries. In this article, the chemical composition, nutritional value, and techno-functional properties of lentil proteins are reviewed. Then, recent advances on the extraction, purification, and modification of lentil proteins are summarized. Hurdles to the widespread utilization of lentil proteins in the food industry are highlighted, along with potential strategies to surmount these challenges. Finally, the potential applications of lentil protein in foods and beverages are discussed. The intention of this article is to offer an up-to-date overview of research on lentil proteins, addressing gaps in the knowledge related to their potential nutritional benefits and functional advantages for application within the food industry. This includes exploring the utilization of lentil proteins as nanocarriers for bioactive compounds, emulsifiers, edible inks for 3D food printing, meat analogs, and components of biodegradable packaging.

Exploring Volatile Profiles and De-Flavoring Strategies for Enhanced Acceptance of Lentil-Based Foods: A Review

Lentils are marketed as dry seeds, fresh sprouts, flours, protein isolates, and concentrates used as ingredients in many traditional and innovative food products, including dairy and meat analogs. Appreciated for their nutritional and health benefits, lentil ingredients and food products may be affected by off-flavor notes described as "beany", "green", and "grassy", which can limit consumer acceptance. This narrative review delves into the volatile profiles of lentil ingredients and possible de-flavoring strategies, focusing on their effectiveness. Assuming that appropriate storage and processing are conducted, so as to prevent or limit undesired oxidative phenomena, several treatments are available: thermal (pre-cooking, roasting, and drying), non-thermal (high-pressure processing, alcohol washing, pH variation, and addition of adsorbents), and biotechnological (germination and fermentation), all of which are able to reduce the beany flavor. It appears that lentil is less studied than other legumes and more research should be conducted. Innovative technologies with great potential, such as high-pressure processing or the use of adsorbents, have been not been explored in detail or are still totally unexplored for lentil. In parallel, the development of lentil varieties with a low LOX and lipid content, as is currently in progress for soybean and pea, would significantly reduce off-flavor notes.

Biopurification using non-growing microorganisms to improve plant protein ingredients

Securing a sustainable global food supply for a growing population requires a shift toward a more plant-based diet. The application of plant-based proteins is therefore increasing, but unpleasant off-flavors complicate their use. Here, we screened 97 microorganisms for their potential to remove off-flavors in a process with limiting amounts of fermentable sugar. This allowed the production of a more neutral-tasting, purified food ingredient while limiting microbial growth and the production of typical fermentation end products. We demonstrate that various lactic acid bacteria (LAB) and yeasts remove "green" aldehydes and ketones. This conversion can be carried out in less than one hour in almond, pea, potato, and oat proteins. Heterofermentative LAB was best at aldehyde and ketone neutralization with minimum de novo formation of microbial volatiles such as ethylacetate (sweet, fruity) or alpha-diketones (butter- and cheese-like). While sensory properties were improved, changes in protein solubility, emulsification, foaming, and in vitro digestibility were limited.

Development of Novel Nanocarriers by Ultrasound and Ethanol-Assisted Soy Protein Isolate: Enhancing the Resistance of Lutein to Environmental Stress

The aim of this work was to investigate the effects of the processing sequence of ultrasound and ethanol on the physicochemical properties of soy protein isolate (SPI), which were further evaluated for the morphology and stability of SPI-lutein coassembled nanoparticles. The results showed that the sequence of ultrasound followed by ethanol treatment was the optimal one. The samples were subjected to ultrasonication followed by subunit disassembly and reassembly induced by 40% (v/v) ethanol, with the resulting molecular unfolding and subsequent aggregation being attributed to intramolecular hydrogen bonds. The recombined nanoparticles had smaller particle size (142.43 ± 2.91 nm) and turbidity (0.16 ± 0.01), and the exposure of more hydrophobic groups (H0 = 6221.00 ± 130.20) induced a shift of SPI structure toward a more ordered direction. The homogeneous and stable particle provided excellent stability for the loading of lutein. The bioaccessibility (from 25.48 ± 2.35 to 65.85 ± 1.78%) and release rate of lutein were modulated in gastrointestinal digestion experiments. Our discoveries provide a new perspective for the development of combined physicochemical modification of proteins as nanocarriers in functional foods.

Unraveling the Role of Flavor Structure and Physicochemical Properties in the Binding Phenomenon with Commercial Food Protein Isolates

Food protein-flavor binding influences flavor release and perception. The complexity of the binding phenomenon lies in the flavor and protein properties. Thus, molecular interactions between commercial whey- or plant-based protein isolates (PI) such as pea, soy, and lupin, with carbonyl and alcohol flavor compounds were assessed by static headspace (HS) GC-MS. HS results showed that not only the displacement of the carbonyl group from the inner part of the flavor structure toward the edge promoted binding up to 52.76% ± 4.65 but also the flavor's degree of unsaturation. Similarly, thermal treatment led to a slight increase in hexanal-protein binding because of possible protein conformational changes. Protein's residual fat (<1%) seemed insufficient to promote significant flavor binding to PI. Despite the complexity of commercial food protein isolates, the results displayed that binding is predominantly influenced by the flavor structure and physicochemical properties, with the protein source and residual fat playing a secondary role.

Flavour by design: food-grade lactic acid bacteria improve the volatile aroma spectrum of oat milk, sunflower seed milk, pea milk, and faba milk towards improved flavour and sensory perception

BACKGROUND

The global market of plant-based milk alternatives is continually growing. Flavour and taste have a key impact on consumers' selection of plant-based beverages. Unfortunately, natural plant milks have only limited acceptance. Their typically bean-like and grassy notes are perceived as "off-flavours" by consumers, while preferred fruity, buttery, and cheesy notes are missing. In this regard, fermentation of plant milk by lactic acid bacteria (LAB) appears to be an appealing option to improve aroma and taste.

RESULTS

In this work, we systematically studied LAB fermentation of plant milk. For this purpose, we evaluated 15 food-approved LAB strains to ferment 4 different plant milks: oat milk (representing cereal-based milk), sunflower seed milk (representing seed-based milk), and pea and faba milk (representing legume-based milk). Using GC‒MS analysis, flavour changes during anaerobic fermentations were studied in detail. These revealed species-related and plant milk-related differences and highlighted several well-performing strains delivered a range of beneficial flavour changes. A developed data model estimated the impact of individual flavour compounds using sensory scores and predicted the overall flavour note of fermented and nonfermented samples. Selected sensory perception tests validated the model and allowed us to bridge compositional changes in the flavour profile with consumer response.

CONCLUSION

Specific strain-milk combinations provided quite different flavour notes. This opens further developments towards plant-based products with improved flavour, including cheesy and buttery notes, as well as other innovative products in the future. S. thermophilus emerged as a well-performing strain that delivered preferred buttery notes in all tested plant milks. The GC‒MS-based data model was found to be helpful in predicting sensory perception, and its further refinement and application promise enhanced potential to upgrade fermentation approaches to flavour-by-design strategies.

Recent innovations and emerging technological advances used to improve quality and process of plant-based milk analogs

The worldwide challenges related to food sustainability are presently more critical than ever before due to the severe consequences of climate change, outbreak of epidemics, and wars. Many consumers are shifting their dietary habits toward consuming more plant-based foods, such as plant milk analogs (PMA) for health, sustainability, and well-being reasons. The PMA market is anticipated to reach US$38 billion within 2024, making them the largest segment in plant-based foods. Nevertheless, using plant matrices to produce PMA has numerous limitations, including, among others, low stability and short shelf life. This review addresses the main obstacles facing quality and safety of PMA formula. Moreover, this literature overview discusses the emerging approaches, e.g., pulsed electric field (PEF), cold atmospheric plasma (CAP), ultrasound (US), ultra-high-pressure homogenization (UHPH), ultraviolet C (UVC) irradiation, ozone (O3), and hurdle technology used in PMA formulations to overcome their common challenges. These emerging technologies have a vast potential at the lab scale to improve physicochemical characteristics, increase stability and extend the shelf-life, decrease food additives, increase nutritional and organoleptic qualities of the end product. Although the PMA fabrication on a large scale using these technologies can be expected in the near future to formulate novel food products that can offer green alternatives to conventional dairy products, further development is still needed for wider commercial applications.

Sensory characterization of yellow pea and ground chicken hybrid meat burgers using static and dynamic methodologies

To reduce animal protein consumption, new food products need to be created. Furthermore, there is a growing number of consumers who consciously act to reduce their meat consumption. Hybrid meat products (HMP) are food items that combine both plant and animal proteins. The objective of this study was to create a hybrid meat burger (HMB) using yellow pea and chicken and to evaluate the sensory properties of the new product using static (check-all-that-apply [CATA]) and dynamic (temporal check-all-that-apply [TCATA]) methods. Yellow pea flour was added to a chicken burger at 0% (control), 10%, 20%, 30%, and 40%. A sensory trial asked participants (n = 69) to evaluate the HMBs using hedonic scales and CATA. A second sensory trial asked experienced panelists (n = 14) to evaluate the items using TCATA. The addition of the yellow pea flour decreased the liking of the burgers, except for the 10% formulation. The burgers made with higher amounts of yellow pea were associated with off-flavors (beany and nutty; significantly different from the control) during both CATA and TCATA tasks and detracted from consumers' liking. Juicy, moist, meaty, salty, and soft attributes increased the consumers' liking. The study identified that the addition of yellow pea to chicken burgers is only acceptable to consumers in small quantities (10%). In addition, the yellow peas contributed off-flavors and a dry texture that was disliked by the consumers. PRACTICAL APPLICATION: The environmental impacts of livestock production have created a need to incorporate more plant-based proteins into consumers' diets to increase sustainability. The market for meat alternatives, including hybrid meat products, is expanding; however, current products do not always meet consumers' expectations. Chicken is the fastest-growing meat sector in North America, and therefore this study's objective was to determine the sensory properties of a burger made from chicken and pulses (yellow pea). It was found that if 10% of chicken in a burger was substituted with yellow pea, then the sensory properties and consumer liking were not significantly affected.

Surmounting the off-flavor challenge in plant-based foods

Plant-based food products have been receiving an astronomical amount of attention recently, and their demand will most likely soar in the future. However, their unpleasant, intrinsic flavor and odor are the major obstacles limiting consumer's acceptance. These off-flavors are often described as "green," "grassy," "beany," "fatty" and "bitter." This review highlights the presence and formation of common off-flavor volatiles (aldehydes, alcohols, ketones, pyrazines, furans) and nonvolatiles (phenolics, saponins, peptides, alkaloids) from a variety of plant-based foods, including legumes (e.g. lentil, soy, pea), fruits (e.g. apple, grape, watermelon) and vegetables (e.g. carrot, potato, radish). These compounds are formed through various pathways, including lipid oxidation, ethanol fermentation and Maillard reaction (and Strecker degradation). The effect of off-flavor compounds as received by the human taste receptors, along with its possible link of bioactivity (e.g. anti-inflammatory effect), are briefly discussed on a molecular level. Generation of off-flavor compounds in plants is markedly affected by the species, cultivar, geographical location, climate conditions, farming and harvest practices. The effects of genome editing (i.e. CRISPR-Cas9), various processing technologies, such as antioxidant supplementation, enzyme treatment, extrusion, fermentation, pressure application, and different storage and packaging conditions, have been increasingly studied in recent years to mitigate the formation of off-flavors in plant foods. The information presented in this review could be useful for agricultural practitioners, fruits and vegetables industry, and meat and dairy analogue manufacturers to improve the flavor properties of plant-based foods.

Flavor challenges in extruded plant-based meat alternatives: A review

Demand for plant-based meat alternatives has increased in recent years due to concerns about health, ethics, the environment, and animal welfare. Nevertheless, the market share of plant-based meat alternatives must increase significantly if they are to support sustainable food production and consumption. Flavor is an important limiting factor of the acceptability and marketability of plant-based meat alternatives. Undesirable chemosensory perceptions, such as a beany flavor, bitter taste, and astringency, are often associated with plant proteins and products that use them. This study reviewed 276 articles to answer the following five research questions: (1) What are the volatile and nonvolatile compounds responsible for off-flavors? (2) What are the mechanisms by which these flavor compounds are generated? (3) What is the influence of thermal extrusion cooking (the primary structuring technique to transform plant proteins into fibrous products that resemble meat in texture) on the flavor characteristics of plant proteins? (4) What techniques are used in measuring the flavor properties of plant-based proteins and products? (5) What strategies can be used to reduce off-flavors and improve the sensory appeal of plant-based meat alternatives? This article comprehensively discusses, for the first time, the flavor issues of plant-based meat alternatives and the technologies available to improve flavor and, ultimately, acceptability.

Pea protein composition, functionality, modification, and food applications: A review

The demand for proteins continues to increase due to their nutritional benefits, the growing world population, and rising protein deficiency. Plant-based proteins represent a sustainable source to supplement costly animal proteins. Pea (Pisum sativum L.) is one of the most produced plant legume crops in the world and contributes to 26% of the total pulse production. The average protein content of pea is about 20%-25%. The commercial utilization of pea proteins is limited, partially due to its less desirable functionalities and beany off-flavor. Protein modification may change these properties and broaden the application of pea proteins in the food industry. Functional properties such as protein solubility, water and oil holding capacity, emulsifying/foaming capacity and stability, and gelation can be altered and improved by enzymatic, chemical, and physical modifications. These modifications work by affecting protein chemical structures, hydrophobicity/hydrophilicity balance, and interactions with other food constituents. Modifiers, reaction conditions, and degree of modifications are critical variables for protein modifications and can be controlled to achieve desirable functional attributes that may meet applications in meat analogs, baking products, dressings, beverages, dairy mimics, encapsulation, and emulsions. Understanding pea protein characteristics will allow us to design better functional ingredients for food applications.

Structural changes and exposed amino acids of ethanol-modified whey proteins isolates promote its antioxidant potential

Whey protein isolates (WPI) were treated with different ethanol level (20, 40, 60, and 80%, v/v) to promote structural unfolding and subsequent aggregation. In general, protein aggregation gradually increased with increasing ethanol level in a dose-dependent manner, which was implied by notably increased turbidity and gradually decreased solubility. The formation of aggregates, which were confirmed by the results of circular dichroism spectrum and total sulfhydryl content, were promoted mainly through disulfide bonds and intra-molecular hydrogen bonds. Moreover, ethanol treated WPI (E-WPI) had significantly enhanced antioxidant activities over native WPI, which was mainly attribute to the higher contents of specific amino acids (such as hydrophobic amino acids, aromatic amino acids, and sulfur-containing amino acids), and E-WPI prepared with moderate ethanol concentration (40% in our present study) exhibited the highest antioxidant activities. These results reveal that antioxidant activities of WPI can be increased by ethanol treatment and are possibly achieved through molecular unfolding of native WPI.

•

Ethanol treatment caused unfolding and aggregation of whey protein isolate (WPI).

•

Aggregation enhanced with increasing ethanol concentration (EC).

•

Medium EC (40%, v/v) rendered the highest antioxidant activities of WPI.

Development of Hydrolysis and Defatting Processes for Production of Lowered Fishy Odor Hydrolyzed Collagen from Fatty Skin of Sockeye Salmon (Oncorhynchus nerka)

Lipid oxidation has a negative impact on application and stability of hydrolyzed collagen (HC) powder from fatty fish skin. This study aimed to produce fat-free HC powder from salmon skin via optimization of one-step hydrolysis using mixed proteases (papain and Alcalase) at different levels. Fat removal processes using disk stack centrifugal separator (DSCS) for various cycles and subsequent defatting of HC powder using isopropanol for different cycles were also investigated. One-step hydrolysis by mixed proteases (3% papain and 4% Alcalase) at pH 8 and 60 °C for 240 min provided HC with highest degree of hydrolysis. HC powder having fat removal with DSCS for 9 cycles showed the decreased fat content. HC powder subsequently defatted with isopropanol for 2 cycles (HC-C9/ISP2) had no fat content with lowest fishy odor intensity, peroxide value, and thiobarbituric acid reactive substances than those without defatting and with 1-cycle defatting. HC-C9/ISP2 had high L*-value (84.52) and high protein (94.72%). It contained peptides having molecular weight less than 3 kDa. Glycine and imino acids were dominant amino acid. HC-C9/ISP2 had Na, Ca, P, and lowered odorous constituents. Combined processes including hydrolysis and defatting could therefore render HC powder free of fat and negligible fishy odor.

Characteristics of Soy Protein Prepared Using an Aqueous Ethanol Washing Process

Currently, the predominant process for soy protein concentrate (SPC) production is aqueous ethanol washing of hexane-extracted soy meal. However, the use of hexane is less desired, which explains the increased interest in cold pressing for oil removal. In this study, cold-pressed soy meal was used as the starting material, and a range of water/ethanol ratios was applied for the washing process to produce SPCs. Washing enriched the protein content for the SPCs, regardless of the solvent used. However, we conclude that washing with water (0% ethanol) or solvents with a high water/ethanol ratio (60% and above) can be more advantageous. Washing with a high water/ethanol ratio resulted in the highest yield, and SPCs with the highest protein solubility and water holding capacity. The water-only washed SPC showed the highest viscosity, and formed gels with the highest gel strength and hardness among all the SPCs at a similar protein concentration. The variations in the functionality among the SPCs were attributed to protein changes, although the effects of non-protein constituents such as sugar and oil might also be important. Overall, the aqueous ethanol washing process combined with cold-pressed soy meal created SPCs comparable to commercial SPC in terms of composition, but with varied functionalities that are relevant for novel soy-food developments.

Supercritical Carbon Dioxide + Ethanol Extraction to Improve Organoleptic Attributes of Pea Flour with Applications of Sensory Evaluation, HS-SPME-GC, and GC-Olfactory

Supercritical carbon dioxide + ethanol (SC-CO2+EtOH) extraction, was employed as a deflavoring method to improve the sensory properties of pea flours. Furthermore, the impacts of particle size along with extraction on volatile profile and sensory attributes of pea flours were investigated using multiple approaches. These included headspace solid-phase microextraction-gas chromatography (HS-SPME-GC), GC-olfactometry (GC-O), and quantitative descriptive analysis (QDA) using a trained sensory panel. Total volatile contents of non-deflavored and deflavored whole pea flour and its fractions were in the range of 7.1 ± 0.3 to 18.1 ± 1.0 µg/g and 0.4 ± 0.1 to 2.7 ± 0.4 µg/g, respectively. The GC-O system showed that the total volatile intensity was in the range of 14.5 to 22.0 and 0 to 3.5, for non-deflavored and deflavored pea flours, respectively. Volatile analyses indicated that 1-hexanol, 1-octanol, 1-nonanol, nonanal, and 2-alkyl methoxypyrazines were major off-aroma compounds. Most off-aroma compounds were not detected in deflavored pea flours. QDA revealed less pea intensity and bitterness of deflavored pea flours. The larger particle size of flours resulted in less off-aroma compounds based on the GC data but more bitterness based on QDA. The SC-CO2+EtOH extraction at optimum conditions and particle size modifications can be a potential technology to improve the organoleptic properties of pulse ingredients.

Impact of alcohol washing on the flavour profiles, functionality and protein quality of air classified pea protein enriched flour

In this study the potential of aqueous solvent washing on removing off-flavours in air classified pea protein-enriched flour (PPEF) was investigated. Unpleasant flavour compounds are one of the main deterrents to the application of pulses. PPEF was treated with ethanol or isopropanol at three different concentrations (20%, 50%, and 80%) to remove the volatiles related to unpleasant beany, earthy and astringent flavours. Headspace solid phase microextraction followed by GC-MS was used to identify the flavour compounds in untreated and treated PPEF. Besides the flavour profile, changes to their proximate composition, colour, functionality and protein quality were compared among untreated and treated samples. Higher concentrations of ethanol and isopropanol (50% and 80%) showed greater effectiveness in removing flavour compounds by reducing the total peak area by 82%-94%. Protein content in all treated samples (58.2%-64.3% d.b.) increased compared to untreated PPEF (55.5%) as a result of purification due to the decrease in ash, lipid and carbohydrate content. However, alcohol treatment reduced the protein solubility and oil holding capacity in all samples by 38.3%-75.9%, and 16.7%-30.2%, respectively. Although in vitro protein digestibility was improved with the solvent treatments, the amino acid scores of those samples became lower (i.e., reduced levels of methionine, cysteine or tryptophan) resulting in up to a 27.8% reduction in in vitro protein digestibility correct amino acid scores. Both ethanol and isopropanol at 50% and 80% concentration proved to be effective in removing flavour compounds in PPEF with some modifications on the chemical compositions, protein functionalities and quality.

Seed Protein of Lentils: Current Status, Progress, and Food Applications

Grain legumes are widely recognized as staple sources of dietary protein worldwide. Lentil seeds are an excellent source of plant-based proteins and represent a viable alternative to animal and soybean proteins for food processing formulations. Lentil proteins provide not only dietary amino acids but are also a source of bioactive peptides that provide health benefits. This review focuses on the current knowledge of seed protein, extraction and isolation methods, bioactive peptides, and food applications of lentil protein. Lentil is the most rapidly expanding crop for direct human consumption, and has potential for greater impact as a protein source for food processing applications. Improvements in lentil protein quality, amino acid composition, and processing fractions will enhance the nutritional quality of this rapidly expanding crop globally.