Photooxidation of phytosterols in oil matrix: Effects of the light, photosensitizers and unsaturation degree of the lipids

Current advances in phytosterol free forms and esters: Classification, biosynthesis, chemistry, and detection

Phytosterols are plant sterols that are important secondary plant metabolites with significant pharmacological properties. Their presence in the plant kingdom concerns many unrelated botanical families such as oleageneous plants and cereals. The structures of phytosterols evoke those of cholesterol. These molecules are composed of a sterane ring, also known as perhydrocyclopentanophenanthrene, along with a methyl or ethyl group at C-24 in their side chains, a hydroxyl group at C-3 on ring A, and one or two double bonds in the B ring. Phytosterols display different oxidation degrees at the sterane ring and at the side chain as well as varying numbers of carbons with complex stereochemistries. Fats and water solubilities of phytosterols have been achieved by physical, chemical and enzymatic esterifications to favor their bioavailability and to improve the sensory quality of food, and the efficiency of pharmaceutic and cosmetic products. This review aims to provide comprehensive information starting from the definition and structural classification of phytosterols, and exposes an update of their biogenic relationships. Next, the synthesis of phytosterol esters and their applications as well as their effective roles as hormone precursors are discussed. Finally, a concise exploration of the latest advancements in phytosterol / oxyphytosterols analysis techniques is provided, with a particular focus on modern hyphenated techniques.

Thermal degradation of stigmasterol under the deodorisation temperature exposure alone and in edible corn oil

Phytosterols are commonly found in vegetable oils and possess health benefits for humans. While investigating the chemical conversion of stigmasterol at deodorisation temperatures, gas chromatography-mass spectrometry (GC-MS) and ultra-high performance liquid chromatography coupled to high-resolution mass spectrometry (UHPLC-HRMS) experiments led to the identification of 5-ethyl-6-methyl-3-heptene-2-one, 3-hydoxy-steroid, 3-ketostigmasterol, and 3,7-diketostigmasterol as by-products. The identification of these compounds assisted in the interpretation of the stigmasterol oligomers characterised by high-pressure size exclusion chromatography (HPSEC). A similar analysis was conducted in stripped corn oil at the deodorisation temperatures. As such, 5-ethyl-6-methyl-3-heptene-2-one, 3-hydoxy-steroid, 3-ketostigmasterol and 3,7-diketostigmasterol were also detected in stripped corn oil, while the contents of 3-hydoxy-steroid and 5-ethyl-6-methyl-3-heptene-2-one were higher than those of 3-ketostigmasterol, as revealed by quantum chemical simulations. In addition, stripped corn oil exhibited the characteristic of preventing stigmasterol degradation below 200 °C, whereas it enhanced the chemical conversion (such as esterification and degradation) of stigmasterol at higher temperatures.

Thermal stability and pathways for the oxidation of four 3-phenyl-2-propene compounds

Cinnamaldehyde, cinnamyl alcohol, β-methylstyrene and cinnamic acid are four important biomass 3-phenyl-2-propene compounds. In the field of perfume and organic synthesis, their thermal stability and oxidation pathways deserve attention. This paper reports a new attempt to investigate the thermal stability and reactivity by a custom-designed mini closed pressure vessel test (MCPVT). The pressure and temperature behaviors were measured by MCPVT under nitrogen and oxygen atmosphere. The temperature of initial oxygen absorption (T a) and rapid oxidation (T R) were calculated. The results showed that four 3-phenyl-2-propene compounds were stable under nitrogen atmosphere. The T a of cinnamaldehyde, cinnamyl alcohol, β-methylstyrene, and cinnamic acid was 271.25 K, 292.375 K, 323.125 K, and 363.875 K, and their T R was 301.125 K, 332.75 K, 357.91 K, and 385.375 K, respectively. The oxidation reactivity order was derived to be cinnamaldehyde > cinnamyl alcohol > β-methylstyrene > cinnamic acid. The oxidation kinetics were determined using n versus time (n-t) plots, which showed a second-order reaction. Peroxide was determined by iodimetry, and the oxidation products were analyzed by gas chromatography-mass spectrometry (GC-MS). The results showed that the peroxide value of cinnamaldehyde, cinnamyl alcohol, β-methylstyrene, and cinnamic acid reached 18.88, 15.07, 9.62, and 4.24 mmol kg-1 at 373 K for 6 h, respectively. The common oxidation products of four 3-phenyl-2-propene compounds were benzaldehyde, benzoic acid, and epoxide, which resulted from the carbon-carbon double bond oxidation. The substituents' oxidation products were obtained from the oxidation of cinnamaldehyde, cinnamyl alcohol, and β-methylstyrene. In particular, the difference is that no oxidation products of the carboxyl group of cinnamic acid were detected. The common oxidation products of the four 3-phenyl-2-propene compounds were benzaldehyde, benzoic acid, and epoxide, which resulted from the carbon-carbon double bond oxidation. The substituents' oxidation products were caught in the oxidation of cinnamaldehyde, cinnamyl alcohol, and β-methylstyrene. In particular, the difference is that no oxidation products of the carboxyl group of cinnamic acid were detected. According to the complex oxidation products, important insights into the oxidation pathways were provided.

24(R, S)-Saringosterol - From artefact to a biological medical agent

Enhancing the cholesterol turnover in the brain via activation of liver x receptors can restore memory in a mouse model for Alzheimer's disease. The edible Asian brown alga Sargassum fusiforme (Hijiki) contains high amounts of oxysterols such as (3β, 24ξ)-stigmasta-5, 28-dien-3, 24-diol (24[R, S]-saringosterol) that are a potent liver x receptor agonists. We aimed to find native European seaweed species with contents of 24(R, S)-saringosterol that are comparable to those found in Sargassum fusiforme. Additionally, we hypothesize that seasonal variations modify the amount of 24(R, S)-saringosterol in seaweeds. Sterols and oxysterols were extracted with chloroform/methanol from various seaweed species harvested in the Eastern Scheldt in different seasons between October 2016 and September 2017. Identification and quantification of the lipids was performed by gas chromatography- mass spectrometry and gas chromatography- flame ionization detection. We confirmed that brown algae Undaria pinnatifida harvested in February and Sargassum muticum harvested in October contained the highest amounts of 24(R, S)-saringosterol (32.4 ± 15.25 μg/g, mean ± S.D. and 32.95 ± 2.91 μg/g, respectively) and its precursor fucosterol (1.48 ± 0.11 mg/g), higher than Sargassum fusiforme (20.94 ± 3.00 μg/g, mean ± S.D.), while Ascophyllum nodosum and Fucus vesiculosus and Fucus serratus contained amounts of 24(R, S)-saringosterol (22.09 ± 3.45 μg/g, 18.04 ± 0.52 μg/g and 19.47 ± 9.01 μg/g, mean ± S.D., respectively) comparable to Sargassum fusiforme. In other algae only minor amounts of these sterols were observed. The green algae Ulva lactuca contained only 0.29 mg/g fucosterol and 10.3 μg/g 24 (R, S)-saringosterol, while all investigated red algae did not contain any 24(R, S)-saringosterol or fucosterol. In the Eastern Scheldt algae harvested in September/October delivered the highest yield for 24(R, S)-saringosterol, with the exception of Undaria pinnatifida that showed the highest levels in February. We showed that exposure of lipid extracts of Ulva lactuca to sunlight at room temperature or in the presence of oxygen to UV-C light lead to the quantitative conversion of fucosterol into 24(R, S)-saringosterol. Exposing pure fucosterol to UV-light did not convert any fucosterol into 24(R, S)-saringosterol underscoring the requirement of seaweed constituents in the conversion of fucosterol into 24(R, S)-saringosterol. In conclusion, we showed that brown seaweeds harvested from the Eastern Scheldt contain amounts of 24(R, S)-saringosterol comparable to Sargassum fusiforme, varying per season and showing the highest amounts in spring. In accordance with these observations the amount of 24(R, S)-saringosterol in the brown seaweeds can be modulated by light.

Dynamics of heat transfer and moisture in beef jerky during hot air drying

The aim of this study was to investigate the surface temperature, moisture migration, muscle shrinkage and microstructure of beef jerky during hot air multi-stage drying. Temperatures were sequentially increased from 40 to 50 to 60 °C, and corresponding times were 0.5 h - 1 h - 2.5 h, 0.5 h - 2 h - 1.5 h, 1 h - 1 h - 2 h and 1 h - 2 h - 1 h in 4 groups. With increasing temperature, moisture content and diffusivity of the sample decreased, the surface temperature, moisture migration, muscle shrinkage and the gaps (spacing) between muscle fibres increased. The jerky in groups 3 and 4 attained high overall acceptability. The jerky dried at 40 °C for 1 h, 50 °C for 1 h and 60 °C for 2 h had highest quality. The results cover the range of temperature and time used in beef drying and can be used to optimize the drying process of beef.

The relationship between flavor formation, lipid metabolism, and microorganisms in fermented fish products

Traditional fermented fish products are favored due to their unique flavors. The fermentation process of fish is accompanied by the formation of flavor substances through a complex metabolic reaction of microorganisms, especially lipolysis and lipid oxidation. However, it is difficult to precisely control the reaction of microorganisms during the fermentation process in modern industrial production, and fermented fish products have lost their traditional characteristic flavors. The purpose of this review is to summarize the different kinds of fermented fish, core microorganisms in it, and flavor formation mechanisms, providing guidance for industrial cultural starters. Future research on the flavor formation mechanism is necessary to confirm the relationship between flavor formation, lipid metabolism, and microorganisms to ensure stable flavor and safety, and to elucidate the mechanism directly toward industrial application.

Food Protein Sterylation: Chemical Reactions between Reactive Amino Acids and Sterol Oxidation Products under Food Processing Conditions

Sterols, especially cholesterol and phytosterols, are important components of food lipids. During food processing, such as heating, sterols, like unsaturated fatty acids, can be oxidized. Protein modification by secondary products of lipid peroxidation has recently been demonstrated in food through a process called lipation. Similarly, this study was performed to assess, for the first time, the possibility of reactions between food proteins and sterol oxidation products in conditions relevant for food processing. Therefore, reaction models consisting of oxysterol (cholesterol 5α,6α-epoxide) and reactive amino acids (arginine, lysine, and methionine) were incubated in various conditions of concentration (0–8 mM), time (0–120 min), and temperature (30–180 °C). The identification of lysine adducts through thin-layer chromatography (TLC), high-performance liquid chromatography (HPLC) with a diode array detector (DAD), and electrospray ionization (ESI) mass spectrometry (MS) evidenced a reaction with lysine. Moreover, the HPLC-ESI with tandem mass spectrometry (MS/MS) analyses allowed observation of the compound, whose mass to charge ratio m/z 710.5 and fragmentation patterns corresponded to the reaction product [M + H]⁺ between cholesterol-5α,6α-epoxide and the ε-amino-group of N_α-benzoylglycyl-l-lysine. Moreover, kinetic studies between N_α-benzoylglycyl-l-lysine as a model for protein-bound lysine and cholesterol 5α,6α-epoxide were performed, showing that the formation of lysine adducts strongly increases with time, temperature, and oxysterol level. This preliminary study suggests that in conditions commonly reached during food processing, sterol oxidation products could react covalently with protein-bound lysine, causing protein modifications.

Formation of phytosterol photooxidation products: A chemical reaction mechanism for light-induced oxidation

Phytosterols (PS) are a group of sterols distributed in foods and plants, where it is prone to oxidation. In this work, we studied the reaction mechanism of phytosterols, using density functional theory (DFT) calculation and experimental methods to study the photooxidation of phytosterols. Under LED light illumination, experimental photooxidation of these phytosterols gives rise to the prior three kind oxides of phytosterol: 6α-OH, 7α-OH, and 7β-OH. The mechanistic investigations by DFT suggest that singlet oxygen (¹O₂)-mediated photooxidation (Type II mechanism) generated radical adds to the C5 and C6 on the B Ring of steroid nucleus and reaction in C7 initiated from C5 products through rearrangement pathway. Furthermore, the stereoselectivity at C5, C6 and C7 provides a mechanistic guide for phytosterols photooxidation. These efforts are expected to serve as an essential exploratory study for the oxidation mechanism of phytosterols in the complex food matrix and antioxidation technology for phytosterols.