The effect of monovalent (Na+, K+) and divalent (Ca2+, Mg2+) cations on rapeseed oleosome (oil body) extraction and stability at pH 7

Fat substitute in salad dressing: The role of soybean oil body self-aggregates in enhancing texture and rheological property

Salad dressing have become a popular condiment in many countries. However, their high fat content may contribute to obesity and related health issues. In this study, mild and extensive purification were used to extract soybean oil body (SOB) with different protein compositions, and further modulated the interfacial charge interactions, thereby producing SOB self-aggregates for fat substitute in salad dressing. Mild purification of SOB increased extrinsic protein content, while extensive purification reduced extrinsic protein content. The mild purification system showed the largest particle size and segregated network structure close to the isoelectric point. However, the extensively purified system exhibited a charge reversal from negative to positive, forming a compact network. Both self-aggregates exhibited shear thinning and elastic properties. Increasing SOB self-aggregate concentration enhanced brightness, electrostatic repulsion and steric hindrance in salad dressing. SOB self-aggregates prepared with extensive purification at pH 5.0, formed a dense network structure that facilitated droplet arrangement, thereby imparting optimal viscoelasticity, enhanced interactions, and thixotropic recovery to salad dressing. This work presents a method based on different protein composition and charge modulation for incorporating oil body as ingredients in spreadable condiments without thickener as label-free products.

Structural characteristics and stability analysis of coconut oil body and its application for loading β-carotene

In this work, we investigated structural characteristics and stability analysis of the coconut oil body (COB) and its application for loading β-carotene (β-CA). The COB contained neutral lipids (81.1 ± 2.1 %), membrane proteins (0.6 ± 0.0 %), and moistures (18.3 ± 3.2 %), in which the molecular weights of membrane proteins ranged from 12 kDa to 40 kDa, as analyzed by the SDS-PAGE. The COB exhibited a small droplet diameter (5.1 ± 0.3 µm) with a monomodal diameter distribution, as reflected by the dynamic light scattering. The COB showed stable states at alkaline pH values (pH 8-10) and instability against ionic strengths (50-200 mmol/L) and thermal treatment (30-90℃) after analyzing the instability indexes. COB-based emulsions were favorable for the loading and retention of β-CA, as reflected by free fatty acids release rates and bioaccessibility in the simulated gastrointestinal digestion. This study will contribute to using the coconut oil bodies for loading bioactive nutraceuticals to enhance their bioaccessibility.

Electrostatics Choreographs the Aggregation Dynamics of Full-Length TDP-43 via a Monomeric Amyloid Precursor

TDP-43 is a ubiquitously expressed, multidomain functional protein that is distinctively known to form aggregates in many fatal neurodegenerative disorders. However, the information for arresting TDP-43 aggregation is missing due to a lack of understanding of the molecular mechanism of the aggregation and structural properties of TDP-43. TDP-43 is inherently prone to aggregation and has minimal protein solubility. Multiple studies have been performed on the smaller parts of TDP-43 or the full-length protein attached to a large solubilization tag. However, the presence of co-solutes or solubilization tags is observed to interfere with the molecular properties and aggregation mechanism of full-length TDP-43. Notably, this study populated and characterized the native, dimeric state of TDP-43 without the interference of co-solutes or protein modifications. We observed that the electrostatics of the local environment is capable of the partial unfolding and monomerization of the native dimeric state of TDP-43 into an amyloidogenic molten globule. By employing the tools of thermodynamics and kinetics, we reveal the structural characteristics and temporal order of the early intermediates and transition states during the transition of the molten globule to β-rich, amyloid-like aggregates of TDP-43, which is governed by the electrostatics of the environment. The current advanced understanding of the nature of native and early aggregation-prone intermediates, early steps, and the influence of electrostatics in TDP-43 aggregation is essential for drug design.

Unveiling the applications of membrane proteins from oil bodies: leading the way in artificial oil body technology and other biotechnological advancements

Oil bodies (OBs) function as organelles that store lipids in plant seeds. An oil body (OB) is encased by a membrane composed of proteins (e.g., oleosins, caleosins, and steroleosins) and a phospholipid monolayer. The distinctive protein-phospholipid membrane architecture of OBs imparts exceptional stability even in extreme environments, thereby sparking increasing interest in their structure and properties. However, a comprehensive understanding of the structure-activity relationships determining the stability and properties of oil bodies requires a more profound exploration of the associated membrane proteins, an aspect that remains relatively unexplored. In this review, we aim to summarize and discuss the structural attributes, biological functions, and properties of OB membrane proteins. From a commercial perspective, an in-depth understanding of the structural and functional properties of OBs is important for the expansion of their applications by producing artificial oil bodies (AOB). Besides exploring their structural intricacies, we describe various methods that are used for purifying and isolating OB membrane proteins. These insights may provide a foundational framework for the practical utilization of OB membrane proteins in diverse applications within the realm of AOB technology, including biological and probiotic delivery, protein purification, enzyme immobilization, astringency detection, and antibody production.

In vitro release modeling of beta-carotene from Bene oleosome and electrosprayed Quince seed hydrocolloids loaded with oleosomes containing beta-carotene

This research aimed to extract oleosome from the Bene kernel as a carrier of beta-carotene (3, 5, and 10 % w/w) and then use oleosomes in the Quince seed gum (QSG) electrosprayed nanoparticles for the sustained release of beta-carotene in food simulant. Oleosomes loaded with 5 % w/w beta-carotene had the highest encapsulation efficiency (94.53 % ± 1.23 %) and were used at 1, 3, and 5 % w/w in the QSG electrosprayed nanoparticles. Electrospray feed solutions containing 5 % oleosomes loaded with beta-carotene had the highest zeta potential (-34.45 ± 0.58 mV) and the lowest surface tension (23.47 ± 1.10 mN/m). FESEM images showed that with the increase of oleosomes up to 3 % w/w, the average size of the electrosprayed particles decreases. The Fourier transform infrared (FTIR) test proved the presence of protein in the oleosomes and their successful extraction from Bene seeds. Differential scanning calorimetry (DSC) and FTIR proved the successful entrapment of beta-carotene in the oleosomes structure and the successful placement of oleosomes containing beta-carotene in the electrosprayed nanoparticles. The predominant driving force involving the release of beta-carotene from the designed structures in food simulants was the Fickian release mechanism. The Peleg model was introduced as the best model describing the beta-carotene release.

Flaxseed oleosomes: Responsiveness to physicochemical stresses, tribological shear and storage

This study aimed to extract oleosomes (OLs) from flaxseeds and assess their response to environmental conditions during storage (pH and ionic strengths), shear and tribological stresses. Our hypothesis was that a shear-induced instability will enable OLs to exhibit favourable lubrication performance. During storage, OLs exhibited resistance to droplet aggregation for up to 6 weeks owing to the proteins (3.5-152.8 kDa molecular weights) stabilizing the OL droplets. However, presence of divalent (Ca2+) ions induced destabilization with marked increase in droplet size (p < 0.05). OLs demonstrated shear thinning behaviour, displaying an order of magnitude higher viscosity than flaxseed oil (FSO) at low shear rates (<10 s-1). Strikingly, OLs mirrored the frictional profile of FSO regardless of entrainment speeds, due to droplet coalescence, validating the hypothesis. Such kinetic stability with shear-induced coalescing feature of OLs hold strong potential for future plant-based food development, particularly in achieving desired mouthfeel characteristics.

Pectin polysaccharide contribution to oleosome extraction after wet milling of rapeseed

Oleosomes are lipid composites providing energy storage in oilseeds. They possess a unique structure, comprised of a triglyceride core stabilized by a phospholipid-protein membrane, and they have shown potential to be used as ingredients in several food applications. Intact oleosomes are extracted by an aqueous process which includes soaking, milling, and gravitational separation. However, the details of the complexes formed between oleosomes, proteins and pectin polysaccharides during this extraction are not known. It was hypothesized that pectins play an important role during the oleosome separation, and different proteins will be complexed on the surface of the oleosomes, depending on the pH of extraction. Rapeseed extracts were treated with and without pectinase (Pectinex Ultra SP-L) and extracted at pH 5.7 or 8.5, as this will affect electrostatic complexation. Acidic conditions led to co-extraction of storage proteins, structured as dense oleosome emulsions, stabilized by a network of proteins and polysaccharides. Pectinase intensified this effect, highlighting pectic polysaccharides' role in bridging interactions among proteins and oleosomes under acidic conditions. The presence of this dense interstitial layer around the oleosomes protected them from coalescence during extraction. Conversely, under alkaline conditions, the extraction process yielded more purified oleosomes characterized by a larger particle size, most likely due to coalescence. Nevertheless, pectinase addition at pH 8.5 mitigated coalescence tendencies. These results contribute to a better understanding of the details of the colloidal complexes formed during extraction and can be used to modulate the composition of the extracted fractions, with significant consequences not only for yields and purity but also for the functional properties of the ingredients produced.

Mild Fractionation for More Sustainable Food Ingredients

With the rising problems of food shortages, energy costs, and raw materials, the food industry must reduce its environmental impact. We present an overview of more resource-efficient processes to produce food ingredients, describing their environmental impact and the functional properties obtained. Extensive wet processing yields high purities but also has the highest environmental impact, mainly due to heating for protein precipitation and dehydration. Milder wet alternatives exclude, for example, low pH-driven separation and are based on salt precipitation or water only. Drying steps are omitted during dry fractionation using air classification or electrostatic separation. Benefits of milder methods are enhanced functional properties. Therefore, fractionation and formulation should be focused on the desired functionality instead of purity. Environmental impact is also strongly reduced by milder refining. Antinutritional factors and off-flavors remain challenges in more mildly produced ingredients. The benefits of less refining motivate the increasing trend toward mildly refined ingredients.

Plant oil bodies and their membrane components: new natural materials for food applications

Plants store triacylglycerols in the form of oil bodies (OBs) as an energy source for germination and subsequent seedling growth. The interfacial biomaterials from these OBs are called OB membrane materials (OBMMs) and have several applications in foods, e.g., as emulsifiers. OBMMs are preferred, compared with their synthetic counterparts, in food applications as emulsifiers because they are natural, i.e., suitable for clean label, and may stabilize bioactive components during storage. This review focuses mainly on the extraction technologies for plant OBMMs, the functionality of these materials, and the interaction of OB membranes with other food components. Different sources of OBs are evaluated and the challenges during the extraction and use of these OBMMs for food applications are addressed.

Physiochemical characteristics and rheological investigations of camellia oil body emulsions stabilized by gum tragacanth as a coating layer

In this work, gum tragacanth (GT) was coated on the camellia oil body (OB) emulsions using an electrostatic deposition technique, and effects were investigated over a wide range of pH values, ionic strengths, temperatures, and freeze-thaw cycles. Special attention has been paid to the rheological features as a function of hydrocolloid concentration, thixotropy (hysteresis loop and in-shear structure recovery), temperature, and frequency. The electrostatic GT-OB surface protein interactions, confirmed by ζ-potential and confocal laser scanning microscopy measurements, led to the reduction of flocculation effects and enhancement of steric stabilization due to the adsorption of polysaccharides to OB surfaces. The activation energy values (E_a) appeared in the range of 21.92 to 8.02 kJ/mol at pH 4 as GT concentration increased from 0 to 1 wt%. The OBs are soft droplets with the degree of structure recovery (DSR) ranged from 0.451 to 0.533; however, GT coating showed synergistic effect on the DSR.

Economic purification of recombinant uricase by artificial oil bodies

Rasburicase is an expensive treatment used to control hyperuricemia caused by tumour lysis syndrome (TLS). In this study, a non-chromatographic method was designed based on nano-oil bodies for convenient and economical purification of the recombinant uricase. For this purpose, two chimaeras were synthesized with a different arrangement of the uricase, caleosin and intein fragments. After confirming the protein expression by measuring the uricase activity at 293 nm, purification was conducted through oil-body construction. The results were resolved on the 12% SDS-PAGE gel. Finally, the stability of the oil bodies was examined against different salts, surfactants, temperatures, and pH values. According to our results, the overexpression of uricase-caleosin chimaera under the T7 promoter in Escherichia coli led to the production of soluble protein, which was successfully purified by artificial oil bodies. The active uricase was subsequently released through the self-splicing of intein. Further investigations highlighted the importance of the free C-terminus of caleosin in constructing artificial oil bodies. Moreover, surfactants and low temperature, in contrast to salts, improved the stability of oil bodies. In conclusion, caleosins are an efficient purification tag reducing the cost of purification compared to conventional chromatography methods.

Impact of replacing pork backfat with rapeseed oleosomes - Natural pre-emulsified oil - On technological properties of meat model systems

The application of natural oil droplets called oleosomes (OSs) as a potential fat replacer in comminuted meat products was investigated by evaluating the influence of rapeseed OS incorporation at 0, 25, 50, 75 and 100% pork fat substitution levels on the technological properties of meat model systems. The moisture content, pH, L* and b* of meat model systems increased while the fat content and a* decreased with the increasing levels of fat replacement. Treatments prepared with OSs showed improvements in emulsion and oxidative stability of meat batters. Texture profile analysis revealed the production of softer, less gummy and less chewy meat systems, whereas micrographs showed smaller-sized fat globules within compact protein matrices as OS levels were increased. Sensory evaluation results exhibited that treatments with partial replacement (≤ 50%) of pork fat by OSs were generally acceptable. The results demonstrate the possibility of maintaining or improving certain technological properties of meat systems with the use of OSs as fat replacer.