Development of high methoxyl pectin-surfactant-pea protein isolate ternary complexes: Fabrication, characterization and delivery of resveratrol

Improvement of interfacial, antioxidant, and emulsifying properties of pectin by grafting surfactin

The changes in structural, interfacial, antioxidant, and emulsifying properties of pectin after grafting surfactin were investigated. Surfactin-pectin conjugate exhibited the highest surface hydrophobicity, approximately 130-fold of surfactin and 1.4-fold of pectin, accompanied by changed FTIR spectra. IC50 for surfactin-pectin to remove DPPH and ABTS radicals was 14.307 and 4.205 mg/mL, lower by 28.32 % and 28.28 % than pectin, respectively. In addition to its strong adsorption capacity at the oil-water interface, surfactin-pectin conjugate demonstrated excellent emulsifying capabilities with EAI and ESI of 62.25 m2/g and 476.20 min, compared to 50.31 m2/g and 381.88 min for pectin, respectively. Grafting surfactin also reduced the particle size of pectin emulsion, thereby improving its stability. The free fat acids release rate of surfactin-pectin conjugate emulsion increased with simulated digestion time, reaching 89.63 % at the end of digestion, much higher than pectin emulsion (35.52 %). Furthermore, surfactin grafting effectively mitigated lipid oxidation in pectin emulsions, as evidenced by a lower peroxide value (74.02 μmol/L) and malondialdehyde content (21.91 mmol/L) after 96 h of storage, compared to 91.8 μmol/L and 26.42 mmol/L for pectin emulsion. These findings highlight surfactin modification as a promising strategy to improve the physicochemical and functional properties of pectin, thereby broadening its potential application.

Anti-solvent precipitation for encapsulation of oyster protein hydrolysate nanoparticles: Effect on off-flavor elimination and bioaccessibility

In this study, to investigate the potential for delivering bioactive substances, various cereal proteoglycan nanoparticles were prepared using anti-solvent precipitation for the delivery of oyster protein hydrolysate (OPH). The hydrogen bonding and hydrophobic interaction were the driving forces for OPH embedding. OPH-Loaded Zein/NaCas/Gum Arabic composite nanoparticles could self-assemble into spherical (191 nm) particles with strong stability, uniform distribution (about PDI = 0.2), and high negative charge (about -28 mV). The secondary structure of OPH-Loaded zein was converted from α-helix to random coil with heat treatment. The off-flavor, including (E, E)-2,4-heptadienal, octadecane, and 1-octanol in OPH-Loaded Zein nanoparticles significantly decreased. Furthermore, these nanoparticles containing OPH had excellent oxidation resistance, in vitro digestibility, and non-toxicity in Caco-2 and HT-29 cells. Overall, this work provides an efficient strategy for OPH delivery, suggesting that OPH could be ingested as a nutraceutical in powder form while also promoting the development of high-flavor-quality oyster products.

Encapsulation of luteolin by self-assembled Rha/SSPS/SPI nano complexes: Characterization, stability, and gastrointestinal digestion in vitro

Luteolin has anti-inflammatory, antioxidant, and anti-tumor functions, but its poor water solubility and stability limit its applications in foods as a functional component. In this study, the nanocomposites loading luteolin (Lut) with soybean protein isolate (SPI), soluble soybean polysaccharide (SSPS) and/or rhamnolipid (Rha) were prepared by layer-by-layer shelf assembly method, and their properties were also evaluated. The results showed that Rha/SPI/Lut had the smallest particle size (206.24 nm) and highest loading ratio (8.03 μg/mg) while Rha/SSPS/SPI/Lut had the highest encapsulation efficiency (82.45 %). Rha interacted with SPI through hydrophobic interactions as the main driving force, while SSPS attached to SPI with only hydrogen bonding. Furthermore, the synergistic effect between Rha and SSPS was observed in Rha/SSPS/SPI/Lut complex, in consequence, it had the best thermal and storage stability, and the slowest release in gastrointestinal digestion. Thus, this approach provided an alternative way for the application of luteolin in functional foods.

Fabrication, Functional Properties, and Potential Applications of Mixed Gellan-Polysaccharide Systems: A Review

Gellan, an anionic heteropolysaccharide synthesized by Sphingomonas elodea, is an excellent gelling agent. However, its poor mechanical strength and high gelling temperature limit its application. Recent studies have reported that combining gellan with other polysaccharides achieves desirable properties for food- and biomaterial-related applications. This review summarizes the fabrication methods, functional properties, and potential applications of gellan-polysaccharide systems. Starch, pectin, xanthan gum, and konjac glucomannan are the most widely used polysaccharides in these composite systems. Heating-cooling and ionic-induced cross-linking approaches have been used in the fabrication of these systems. Composite gels fabricated using gellan and various polysaccharides exhibit different functional properties, possibly because of their distinct molecular interactions. In terms of applications, mixed gellan-polysaccharide systems have been extensively used in texture modification, edible coatings and films, bioactive component delivery, and tissue-engineering applications. Further scientific studies, including structural determinations of mixed systems, optimization of processing methods, and expansion of applications in food-related fields, are needed.

Pectin-coated whey protein isolate/zein self-aggregated nanoparticles as curcumin delivery vehicles: Effects of heating, pH, and adding sequence

In this work, pectin was employed as a coating material to fabricate zein/whey protein isolate (WPI)/pectin complex nanoparticles via a pH-adjusted and heat-induced electrostatic adsorption process for potential oral administration applications of curcumin. Factors such as the order of raw material addition, heating temperature and pH, and zein concentration were comprehensively examined. In addition to electrostatic interactions, Fourier transform infrared and fluorescence spectroscopy indicated that hydrophobic interactions and hydrogen bonds were also involved in the development of complex nanoparticles. The complex nanoparticles obtained not only improved the antioxidant activity of curcumin in aqueous phase, but also contributed to its controlled release under gastrointestinal conditions. Our findings revealed that the heating pH and adding sequence of raw materials had a notable impact on the properties of complex nanoparticles, and that pectin coating had an exceptional stabilizing effect on complex nanoparticles under gastrointestinal circumstances. This study provides novel insights and perspectives for the preparation of polysaccharide-protein complex nanoparticles, signifying the potential use of zein/WPI/pectin complex nanoparticles as delivery vehicles in the functional food and pharmaceutical industries.

Recent advances in oral delivery systems of resveratrol: foreseeing their use in functional foods

Herein, we review the current state-of-the-art on the use of micro- and nano-delivery systems, a possible solution to some of the drawbacks associated with the incorporation of resveratrol in foods. Specifically, we present an overview of a wide range of micro-nanostructures, namely, lipidic and polymeric, used for the delivery of resveratrol. Also, the gastrointestinal fate of resveratrol-loaded micro-nanostructures, as a critical parameter for their use as functional food, is explored in terms of stability, bioaccessibility, and bioavailability. Different micro-nanostructures are of interest for the development of functional foods given that they can provide different advantages and properties to these foods and even be tailor-made to address specific issues (e.g., controlled or targeted release). Therefore, we discuss a wide range of micro-nanostructures, namely, lipidic and polymeric, used to deliver resveratrol and aimed at the development of functional foods. It has been reported that the use of some production methodologies can be of greater interest than others, for example, emulsification, solvent displacement and electrohydrodynamic processing (EHDP) enable a greater increase in bioaccessibility. Additionally, the use of coatings facilitates further improvements in bioaccessibility, which is likely due to the increased gastric stability of the coated micro-nanostructures. Other properties, such as mucoadhesion, can also help improve bioaccessibility due to the increase in gut retention time. Additionally, cytotoxicity (e.g., biocompatibility, antioxidant, and anti-inflammatory) and possible sensorial impact of resveratrol-loaded micro- and nano-systems in foods are highlighted.

An overview of tea saponin as a surfactant in food applications

The residue of Camellia seeds after oil extraction contains many bioactive ingredients, including tea saponin. Tea saponin has many pharmacological effects and is an excellent nonionic surfactant. The development of natural surfactants has become a hot topic in food research. This review gathers the applications of tea saponin as a surfactant in food. It focuses on the application of tea saponin in emulsions, delivery systems, extraction and fermentation, as well as the challenges and development prospects in food applications. Tea saponin shows great potential as a surfactant in food applications, which can replace some synthetic surfactants. The full utilization of tea saponin improves the comprehensive utilization value of Camellia seed residue, contributes to the sustainable development of Camellia industry and avoids resource waste.

Properties of curcumin-loaded zein-tea saponin nanoparticles prepared by antisolvent co-precipitation and precipitation

The properties of nutraceutical-loaded biopolymer nanoparticles fabricated by antisolvent co-precipitation (ASCP) and precipitation (ASP) were compared. Curcumin-loaded zein-tea saponin nanoparticles were fabricated using both methods and then their structural and physicochemical properties were characterized. The diameter of the nanoparticles prepared by ASCP were smaller (120-130 nm) than those prepared by ASP (140-160 nm). The encapsulation efficiency of the ASCP-nanoparticles (80.0%) was higher than the ASP-ones (71.0%) at a zein-to-curcumin mass ratio of 3:1, which was also higher than previous studies. The storage and light stability of curcumin was higher in zein-saponin nanoparticles than in zein nanoparticles. All nanoparticles had good water dispersibility after freeze-drying and rehydration. This study shows that nanoparticles produced by antisolvent co-precipitation have superior properties to those produced by antisolvent precipitation. The co-precipitation method leads to a higher encapsulation efficiency, smaller particle size, and greater storage stability, which may be advantageous for some applications.

Fabrication and Characterization of Chitosan-Pea Protein Isolate Nanoparticles

Chitosan (CS) and pea protein isolate (PPI) were used as raw materials to prepare nanoparticles. The structures and functional properties of the nanoparticles with three ratios (1:1, 1:2 1:3, CS:PPI) were evaluated. The particle sizes of chitosan-pea protein isolate (CS-PPI) nanoparticles with the ratios of 1:1, 1:2, and 1:3 were 802.95 ± 71.94, 807.10 ± 86.22, and 767.75 ± 110.10 nm, respectively, and there were no significant differences. Through the analysis of turbidity, endogenous fluorescence spectroscopy and Fourier transform infrared spectroscopy, the interaction between CS and PPI was mainly caused by electrostatic mutual attraction and hydrogen bonding. In terms of interface properties, the contact angles of nanoparticles with the ratio of 1:1, 1:2, and 1:3 were 119.2°, 112.3°, and 107.0°, respectively. The emulsifying activity (EAI) of the nanoparticles was related to the proportion of protein. The nanoparticle with the ratio of 1:1 had the highest potential and the best thermal stability. From the observation of their morphology by transmission electron microscopy, it could be seen that the nanoparticles with a ratio of 1:3 were the closest to spherical. This study provides a theoretical basis for the design of CS-PPI nanoparticles and their applications in promoting emulsion stabilization and the delivery of active substances using emulsions.

Encapsulation of resveratrol-loaded Pickering emulsions in alginate/pectin hydrogel beads: Improved stability and modification of digestive behavior in the gastrointestinal tract

In this study, alginate/pectin hydrogel beads were prepared with different mixing ratios (9:1, 8:2, 7:3, 6:4, and 5:5) to encapsulate resveratrol-loaded Pickering emulsions using Ca²⁺ crosslinking. The system with a suitable ratio of pectin and alginate can enhance the encapsulation efficiency and loading capacity. Scanning electron microscopy (SEM) study confirmed that the hydrogel beads were spherical, in which Pickering emulsion was distributed evenly within the polymer network. Fourier Transform Infrared Spectroscopy (FTIR) study indicated that the hydrogel beads were formed by physical cross-linking. X-ray diffraction (XRD) study demonstrated that resveratrol existed in hydrogel beads with an amorphous or dissolved form. Besides, the stability and antioxidant capacity suggested that hydrogel beads could offer protection to resveratrol by preventing degradation through environmental stresses, while maintaining its antioxidant capacity. Importantly, hydrogels significantly reduced the release of free fatty acids and resveratrol during in vitro digestion compared to emulsions, especially with the appropriate ratio of sodium alginate and pectin. Overall, Pickering emulsions-loaded alginate/pectin hydrogel beads could offer a novel option for the preparation of low-calorie foods and a potential substitute model for controlling the release of free fatty acids contributing to the transportation of resveratrol.

Hesperetin (citrus peel flavonoid aglycone) encapsulation using pea protein-high methoxyl pectin electrostatic complexes: complex optimization and biological activity

BACKGROUND

Orange pomace polyphenols have potential for use as nutraceutical ingredients in functional foods and beverages. However, owing to their low water solubility and bioaccessibility, they are not being utilized to their full potential. The goal of this research is to assess the impact of encapsulation on hesperetin (HT - a model orange polyphenol) water solubility, antioxidant activity, and in vitro bioaccessibility.

RESULTS

In this study, a citrus flavonoid aglycone, HT, was encapsulated within water-dispersible colloidal complexes (d = 350 ± 8 nm) formed by electrostatic attraction of pea protein isolate and high-methoxyl pectin at a mixing ratio of 1:1 (v/v) and pH 4. The maximum amount of HT that could be dispersed in water was much higher for the encapsulated form (99 ± 7 μg mL^-1 ) than the non-encapsulated form (<10 μg mL^-1 ). The radical scavenging activity of the encapsulated HT (>90%, pH 4) was much higher than the non-encapsulated form (<15% at pH 4 or 7). The in vitro bioaccessibility of encapsulated HT (27 ± 7%) was also much higher than the non-encapsulated form (<7%).

CONCLUSION

These results suggest that a well-designed, biopolymer-based delivery system may improve the effective incorporation of HT, and potentially other orange pomace polyphenols, into food and beverage products. This could provide an additional high-value use for orange juicing by-products while introducing a new nutraceutical product to the food and beverage industry. © 2022 Society of Chemical Industry.

Preparation of protamine-hyaluronic acid coated core-shell nanoparticles for enhanced solubility, permeability, and oral bioavailability of decoquinate

Decoquinate (DQ) has low oral bioavailability owing to its poor water solubility. In this study, a DQ solid dispersion (DQ-SD) was fabricated using mechanochemical technology to encapsulate DQ and improve its oral bioavailability. DQ-SD is easily generated via self-assembly in the aqueous phase to form micelles consisting of disodium glycyrrhizinate (Na₂GA) nanoparticles with a protamine (PRM) and anionic hyaluronic acid (HA) layers. The spherical DQ nanoparticles with an average diameter of 114.95 nm were obtained in an aqueous phase with a critical micelle concentration of 0.157 mg/mL, zeta potential of -38.38 mV, polydispersity index of 0.200, and drug loading of 5.66 %. The dissolution rate and cumulative release of DQ-SD were higher than those of pure DQ. Furthermore, the bioavailability of DQ-SD was approximately 6.3 times higher than that of pure DQ. Pharmacokinetic and biodistribution studies indicated that DQ-SD possessed a significantly higher concentration in the blood and preferential liver tissue accumulation, than that of pure DQ. The developed DQ-SD exhibited considerable potential for developing old DQ for a new application as a hematogenous parasite drug and provides a reference for developing more efficient delivery systems for hydrophobic bioactive agents.

Interaction mechanism between soybean protein isolate and citrus pectin

In this study, citrus pectin (CP) and soybean protein isolate (SPI) were used as raw materials to prepare a complex. The interaction mechanism and structural changes between SPI and CP were deeply studied by fluorescence spectroscopy and Fourier infrared spectroscopy. The results show that CP has a strong quenching effect on SPI's endogenous fluorescence, and with the addition of CP, the endogenous fluorescence intensity of SPI decreased from 13,565.2 to 6067.3. The CP quenching of SPI is static quenching, and the number of combined bits is 1.26. The results of three-dimensional fluorescence spectra showed that the addition of CP reduced the polarity of SPI amino acid residue microenvironment and changed the protein structure. Hydrophobic interaction exists between CP and SPI. The results of three-dimensional fluorescence spectra showed that the addition of CP reduced the polarity of the amino acid residue microenvironment of SPI and changed the protein structure. Fourier transform infrared spectroscopy shows that CP could change the secondary structure of SPI by decreasing the α-helix and β-sheet, increasing β-rotation and irregular curl, destroying the ordered structure of SPI and increasing the polarity of the amino acids exposed to the solution. The microstructure analysis shows that SPI-CP composite system has honeycomb structure and dense pores. From the perspective of reaction thermodynamics, it was found that the addition of CP could improve the thermal stability of SPI and increase the denaturation temperature of SPI from 119.73 to 132.97°C. This study can provide a theoretical basis for the preparation of protein-pectin complexes and provides reference for their application in food grade gels and Pickering emulsions.

Effects of different surfactants on the conjugates of soybean protein-polyphenols for the preparation of β-carotene microcapsules

In this study, we investigated the spray-drying microencapsulation of β-carotene in oil co-stabilized by soy protein isolate-epigallocatechin-3-gallate conjugate (SPE) and small molecule surfactants [sodium dodecyl sulfate (SDS), hexadecyl trimethyl ammonium bromide (CTAB), and tea saponin (TS)] of different concentrations [0.1, 0.5, and 1.0% (w/v)], as a prospective approach to stabilize β-carotene. The results show that different surfactant types and concentrations significantly affect the encapsulation efficiency, water dispersibility, microstructure, and digestion of the microcapsules. Interactions between the surfactants and the SPE at the interface were found to include both synergistic and competitive effects, and they depended on the surfactant type and concentration. Moreover, the addition of SDS and TS before spray drying significantly improved the microencapsulation performance of the microcapsules and the water dispersion behavior of the corresponding spray-dried powders. The highest encapsulation efficiency was achieved for the SPE-0.1TS-encapsulated β-carotene microcapsules. In contrast, the addition of CTAB was not conducive to microcapsule formation, resulting in poor encapsulation efficiency, water dispersibility, thermal stability, β-carotene retention rate, and oxidation stability. In vitro gastrointestinal digestion results revealed that the addition of CTAB promotes the release of β-carotene and improves the bioaccessibility of β-carotene. In contrast, except for SPE-1.0SDS, the addition of SDS and TS inhibited β-carotene release and reduced β-carotene bioaccessibility. This study demonstrated that this novel β-carotene encapsulation formulation can overcome stability limitations for the development of β-carotene supplements with a high bioaccessibility.

Impact of calcium ions and degree of oxidation on the structural, physicochemical, and in-vitro release properties of resveratrol-loaded oxidized gellan gum hydrogel beads

Oxidized gellan gum (OGG) hydrogel beads as delivery systems for resveratrol were fabricated by ionic cross-linking with calcium chloride (CaCl₂). The degree of oxidation (DO) and CaCl₂ concentration had significant influences on the formation and functional properties of hydrogel beads. The resveratrol encapsulation efficiency (66.43%-79.84%) and loading capacity (4.15%-5.05%) of OGG hydrogel beads were enhanced as DO increased. The hydrogel beads exhibited a uniform spherical shape as observed by scanning electron microscope. Fourier transform infrared spectroscopy analysis confirmed that hydrogen bonds and ionic interaction participated in the formation of hydrogel beads. X-ray diffraction analysis revealed that the physical state of resveratrol was changed from crystalline to amorphous form after encapsulation. Furthermore, the physical stability and antioxidant capacity evaluation demonstrated that the hydrogel bead fabricated with DO80 OGG and CaCl₂ concentration of 1.0 M could provide high protection for resveratrol against degradation by environmental stresses and maintain its antioxidant capacity. The DO and CaCl₂ concentrations could modulate the in-vitro release behaviors of hydrogel beads and obtain a good small intestinal-targeted release of resveratrol at high DO and medium CaCl₂ concentration. These findings suggested that a promising delivery system for encapsulating bioactive ingredients can be fabricated by rational design.

Encapsulation of phenolic compounds within food-grade carriers and delivery systems by pH-driven method: a systematic review

In comparison to conventional encapsulation methods of phenolic compounds (PCs), pH-driven method is green, simple and requires low energy consumption. It has a huge potential for industrial applications, and can overcome more effectively the aqueous solubility, stability and bioavailability issues related to PCs by changing pH to induce the encapsulation of PCs. This review aims to shed light on the use of pH-driven method for encapsulating PCs. The preparation steps and principles governing pH-driven method using various carriers and delivery systems are provided. A comparison of pH-driven with other methods is also presented. To circumvent the drawbacks of pH-driven method, improvement strategies are proposed. The essence of pH-driven method relies simultaneously on alkalization and acidification to bind PCs and carriers. It is used for the development of nanoemulsions, liposomes, edible films, nanoparticles, nanogels and functional foods. As a result of pH-driven method, PCs-loaded carriers may have smaller size, high encapsulation efficiency, more sustained-release and good bioavailability, due mainly to effects of pH change on the structure and properties of PCs as well as carriers. Finally, modification of wall materials and type of acidifier are considered as efficient approaches to improve the pH-driven method.

Improvement of stability and bioaccessibility of β-carotene by curcumin in pea protein isolate-based complexes-stabilized emulsions: Effect of protein complexation by pectin and small molecular surfactants

The impact of different complexes on the properties of β-carotene-loaded emulsions was investigated by measuring the droplet size, encapsulation efficiency, droplet morphology, and physical stability. The photo and thermal stability of β-carotene and its bioaccessibility during digestion were also analyzed. Comparing to the emulsions stabilized by other complexes, the emulsion stabilized by the high methoxyl pectin-rhamnolipid-pea protein isolate-curcumin (HMP-Rha-PPI-Cur) complex had the smallest droplet size (17.53 ± 0.15 μm) and the maximum encapsulation efficiency for curcumin (90.33 ± 0.03 %) and β-carotene (92.16 ± 0.01 %). The emulsion stabilized by the HMP-Rha-PPI-Cur complex exhibited better physical stability against creaming. The retention rate of β-carotene in the HMP-Rha-PPI-Cur complex-stabilized emulsion was 17.75 ± 0.02 and 33.64 ± 0.02 % after UV irradiation and thermal treatment. The HMP-Rha-PPI-Cur complex-stabilized emulsion also had a higher level of free fatty acid released (43.67 %) and higher bioaccessibility of β-carotene (32.35 ± 0.02 %).

In vitro antioxidant and antitumor study of zein/SHA nanoparticles loaded with resveratrol

Resveratrol (RES) loaded Zein-SHA (low-molecular-weight sodium hyaluronate) nanoparticles with average diameter of about 152.13 nm and polydispersity index (PDI) of 0.122, which can be used to encapsulate, protect and deliver resveratrol. By measuring ABTS free radical scavenging ability and iron (III) reducing power, it was determined that encapsulated resveratrol has higher in vitro antioxidant activity than free resveratrol. When tested with murine breast cancer cells 4T1, the encapsulated resveratrol also showed higher antiproliferative activity than free resveratrol, with IC50 values of 14.73 and 17.84 μg/ml, respectively. The colloidal form of resveratrol developed in this research may be particularly suitable for functional foods and beverages, as well as dietary supplements and pharmaceutical products.

Innovative Delivery Systems Loaded with Plant Bioactive Ingredients: Formulation Approaches and Applications

Plants constitute a rich source of diverse classes of valuable phytochemicals (e.g., phenolic acids, flavonoids, carotenoids, alkaloids) with proven biological activity (e.g., antioxidant, anti-inflammatory, antimicrobial, etc.). However, factors such as low stability, poor solubility and bioavailability limit their food, cosmetics and pharmaceutical applications. In this regard, a wide range of delivery systems have been developed to increase the stability of plant-derived bioactive compounds upon processing, storage or under gastrointestinal digestion conditions, to enhance their solubility, to mask undesirable flavors as well as to efficiently deliver them to the target tissues where they can exert their biological activity and promote human health. In the present review, the latest advances regarding the design of innovative delivery systems for pure plant bioactive compounds, extracts or essential oils, in order to overcome the above-mentioned challenges, are presented. Moreover, a broad spectrum of applications along with future trends are critically discussed.

Fabrication of soy protein isolate/cellulose nanocrystal composite nanoparticles for curcumin delivery

In this study, we developed novel complex nanoparticles as carriers for curcumin (Cur) delivery by using soy protein isolate (SPI) and cellulose nanocrystals (CNC) as polymer matrices. We found that the SPI-to-CNC mass ratio influenced the stability and physical properties of the SPI-CNC complex nanoparticles. Moreover, SPI-CNC complex nanoparticles had a relatively small size (197.7 ± 0.2 nm) and low polydispersity index (0.14) at a 6:1 mass ratio. The nanosystem was relatively stable at different pH values (3-9), temperatures (30-90 °C), and salt concentrations (0-40 mmol/L). Furthermore, the complex nanoparticles exhibited a high encapsulation efficiency (88.3%) and sustained release during simulated gastrointestinal digestion. Therefore, SPI-CNC complex nanoparticles are a promising delivery system for hydrophobic bioactive compounds.