A data fusion model merging information from near infrared spectroscopy and X-ray fluorescence. Searching for atomic-molecular correlations to predict and characterize the composition of coffee blends

Combining Vis-NIR and NIR hyperspectral imaging techniques with a data fusion strategy for prediction of norfloxacin residues in mutton

Norfloxacin is an antibacterial compound that belongs to the fluoroquinolone family. Currently, hyperspectral imaging (HSI) for the detection of antibiotic residues focuses mostly on individual systems. Attempts to integrate different HSI systems with complementary spectral ranges are still lacking. This study investigates the feasibility of applying data fusion strategies with two HSI techniques (Visible near-infrared and near-infrared) in combination to predict norfloxacin residue levels in mutton. Spectral data from the two spectral techniques were analyzed using partial least squares regression (PLSR), support vector regression (SVR) and stochastic configuration networks (SCN), respectively, and the two data fusion strategies were fused at the data level (low-level fusion) and feature level (middle-level fusion, mid-level fusion). The results indicated that the modeling performance of the two fused datasets was better than that of the individual systems. Mid-level fusion data achieved the best model based on uninformative variable elimination (UVE) combined with SCN, in which the determination coefficient of prediction set (R2p) of 0.9312, (root mean square error of prediction set) RMSEP of 0.3316 and residual prediction deviation (RPD) of 2.7434, in comparison with all others. Therefore, two HSI systems with complementary spectral ranges, combined with data fusion strategies and feature selection, could be used synergistically to improve the detection of norfloxacin residues. This study may provide a valuable reference for the non-destructive detection of antibiotic residues in meat.

Gaussian process regression coupled with mRMR to predict adulterant concentration in cocaine

Street cocaine is often mixed with various substances that intensify its harmful effects. This paper proposes a framework to identify attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) intervals that best predict the concentration of adulterants in cocaine samples. Wavelengths are ranked according to their relevance through ReliefF and mRMR feature selection approaches, and an iterative process removes less relevant wavelengths based on the ranking suggested by each approach. Gaussian Process (GP) regression models are constructed after each wavelength removal and the prediction performance is evaluated using RMSE. The subset balancing a low RMSE value and a small percentage of retained wavelengths is chosen. The proposed framework was validated using a dataset consisting of 345 samples of cocaine with different amounts of levamisole, caffeine, phenacetin, and lidocaine. Averaged over the four adulterants, the GP regression coupled with the mRMR retained 1.07 % of the 662 original wavelengths, outperforming PLS and SVR regarding prediction performance.

Rapid Prediction of Adulteration Content in Atractylodis rhizoma Based on Data and Image Features Fusions from Near-Infrared Spectroscopy and Hyperspectral Imaging Techniques

Atractylodis rhizoma (AR) is an herb and food source with great economic, medicinal, and ecological value. Atractylodes chinensis (DC.) Koidz. (AC) and Atractylodes lancea (Thunb.) DC. (AL) are its two botanical sources. The commercial fraud of AR adulterated with Atractylodes japonica Koidz. ex Kitam (AJ) frequently occurs in pursuit of higher profit. To quickly determine the content of adulteration in AC and AL powder, two spectroscopic techniques, near-infrared spectroscopy (NIRS) and hyperspectral imaging (HSI), were introduced. The partial least squares regression (PLSR) algorithm was selected for predictive modeling of AR adulteration levels. Preprocessing and feature variable extraction were used to optimize the prediction model. Then data and image feature fusions were developed to obtain the best predictive model. The results showed that if only single-spectral techniques were considered, NIRS was more suitable for both tasks than HSI techniques. In addition, by comparing the models built after the data fusion of NIRS and HSI with those built by the single spectrum, we found that the mid-level fusion strategy obtained the best models in both tasks. On this basis, combined with the color-texture features, the prediction ability of the model was further optimized. Among them, for the adulteration level prediction task of AC, the best strategy was combining MLF data (at CARS level) and color-texture features (C-TF), at which time the R2T, RMSET, R2P, and RMSEP were 99.85%, 1.25%, 98.61%, and 5.06%, respectively. For AL, the best approach was combining MLF data (at SPA level) and C-TF, with the highest R2T (99.92%) and R2P (99.00%), as well as the lowest RMSET (1.16%) and RMSEP (2.16%). Therefore, combining data and image features from NIRS and HSI is a potential strategy to predict the adulteration content quickly, non-destructively, and accurately.

Direct Identification and Quantitation of Protein Peptide Powders Based on Multi-Molecular Infrared Spectroscopy and Multivariate Data Fusion

Given that protein peptide powders (PPPs) from different biological sources were inherited with diverse healthcare functions, which aroused adulteration of PPPs. A high-throughput and rapid methodology, united multi-molecular infrared (MM-IR) spectroscopy with data fusion, could determine the types and component content of PPPs from seven sources as examples. The chemical fingerprints of PPPs were thoroughly interpreted by tri-step infrared (IR) spectroscopy, and the defined spectral fingerprint region of protein peptide, total sugar, and fat was 3600-950 cm^-1, which constituted MIR finger-print region. Moreover, the mid-level data fusion model was of great applicability in qualitative analysis, in which the F1-score reached 1 and the total accuracy was 100%, and a robust quantitative model was established with excellent predictive capacity (R_p: 0.9935, RMSEP: 1.288, and RPD: 7.97). MM-IR coordinated data fusion strategies to achieve high-throughput, multi-dimensional analysis of PPPs with better accuracy and robustness which meant a significant potential for the comprehensive analysis of other powders in food as well.

SHS-GC-MS applied in Coffea arabica and Coffea canephora blend assessment

Considering the great economic significance of Coffea arabica (arabica) associated with the lower production cost of C. canephora (conilon), blends of these coffees are commercially available to reduce costs and combine sensory attributes. Thus, analytical tools are required to ensure consistency between real and labeled compositions. In this sense, chromatographic methods based on volatile analysis using static headspace-gas chromatography-mass spectrometry (SHS-GC-MS) and Fourier transform infrared (FTIR) spectroscopy associated with chemometric tools were proposed for the identification and quantification of arabica and conilon blends. The peak integration from the total ion chromatogram (TIC) and extracted ion chromatogram (EIC) was compared in multivariate and univariate scenarios. The optimized partial least squares (PLS) models with uninformative variable elimination (UVE) and chromatographic data (TIC and EIC) have similar accuracy according to a randomized test, with prediction errors between 3.3% and 4.7% and R_p² > 0.98. There was no difference between the univariate models for the TIC and EIC, but the FTIR model presented a lower performance than GC-MS. The multivariate and univariate models based on chromatographic data had similar accuracy. For the classification models, the FTIR, TIC, and EIC data presented accuracies from 96% to 100% and error rates from 0% to 5%. Multivariate and univariate analyses combined with chromatographic and spectroscopic data allow the investigation of coffee blends.

Internal reflectance cell fluorescence measurement combined with multi-way analysis to detect fluorescence signatures of undiluted honeys and a fusion of fluorescence and NIR to enhance predictability

Honey is a complex food matrix that contains diverse polyphenolic compounds. Some phenolics exhibit fluorescence signatures which can be used to evaluate honey quality, and authenticity and to determine botanical origin. Mānuka honey contains two unique fluorescence markers: Leptosperin (MM1) and Lepteridine^TM (MM2) that are derived from Leptospermum scoparium nectar. Fluorescence measurement of supersaturated solutions such as undiluted honeys can be challenged by complex inner filter effects. The current study shows the ability of internal reflectance cell fluorescence measurement and multi-way analysis to detect fluorophores in undiluted honeys. This study scanned honeys from different geographic districts generating excitation emission matrices (250-400/300-600 nm), and by near infrared (NIR) hyperspectral camera (547-1701 nm). PARAFAC and tri-PLS could track two fluorescence markers: MM1 (R² = 0.82 & RMSEP = 138.65) and MM2 (R² = 0.82 & RMSEP = 2.75) from undiluted honey fluorescence data with > 80 % accuracy. Classification of mono-floral, multi-floral and non-mānuka honeys achieved 90 % overall accuracy. Fusion of fluorescence data at ƛ_ex 270 & 330 nm and NIR hyperspectral data combined with multi-block PLS analysis enhances predictability of fluorescence markers further. The study revealed the potential of internal reflectance cell fluorescence measurement combined with chemometrics and data fusion for rapid evaluation of honey quality and botanical origin.

A Synergetic Strategy for Brand Characterization of Colla Corii Asini (Ejiao) by LIBS and NIR Combined with Partial Least Squares Discriminant Analysis

A synergetic strategy was proposed to address the critical issue in the brand characterization of Colla corii asini (Ejiao, CCA), a precious traditional Chinese medicine (TCM). In all brands of CCA, Dong'e Ejiao (DEEJ) is an intangible cultural heritage resource. Seventy-eight CCA samples (including forty DEEJ samples and thirty-eight samples from other different manufacturers) were detected by laser-induced breakdown spectroscopy (LIBS) and near-infrared spectroscopy (NIR). Partial least squares discriminant analysis (PLS-DA) models were built first considering individual techniques separately, and then fusing LIBS and NIR data at low-level. The statistical parameters including classification accuracy, sensitivity, and specificity were calculated to evaluate the PLS-DA model performance. The results demonstrated that two individual techniques show good classification performance, especially the NIR. The PLS-DA model with single NIR spectra pretreated by the multiplicative scatter correction (MSC) method was preferred as excellent discrimination. Though individual spectroscopic data obtained good classification performance. A data fusion strategy was also attempted to merge atomic and molecular information of CCA. Compared to a single data block, data fusion models with SNV and MSC pretreatment exhibited good predictive power with no misclassification. This study may provide a novel perspective to employ a comprehensive analytical approach to brand discrimination of CCA. The synergetic strategy based on LIBS together with NIR offers atomic and molecular information of CCA, which could be exemplary for future research on the rapid discrimination of TCM.

Spectroscopic technologies and data fusion: Applications for the dairy industry

Increasing consumer awareness, scale of manufacture, and demand to ensure safety, quality and sustainability have accelerated the need for rapid, reliable, and accurate analytical techniques for food products. Spectroscopy, coupled with Artificial Intelligence-enabled sensors and chemometric techniques, has led to the fusion of data sources for dairy analytical applications. This article provides an overview of the current spectroscopic technologies used in the dairy industry, with an introduction to data fusion and the associated methodologies used in spectroscopy-based data fusion. The relevance of data fusion in the dairy industry is considered, focusing on its potential to improve predictions for processing traits by chemometric techniques, such as principal component analysis (PCA), partial least squares regression (PLS), and other machine learning algorithms.

Multi critical quality attributes monitoring of Chinese oral liquid extraction process with a spectral sensor fusion strategy

The traditional Chinese medicine (TCM) extraction process is a complicated dynamic system with many variables and disturbance. Therefore, multi critical quality attributes (CQAs) monitoring is of great significance to understand the whole process. Spectroscopy is a powerful process analytical tool used for process understanding. However, single senor sometimes could not provide comprehensive information. Sensor fusion is a very practical method to overcome this deficiency. In this study, the extraction process of Xiao'er Xiaoji Zhike Oral Liquid (XXZOL) was carried out in pilot scale, where near infrared (NIR) spectroscopy and mid infrared (MIR) spectroscopy were collected to determine the concentrations of seven CQAs (synephrine, arecoline, chlorogenic acid, forsythoside A, naringin, hesperidin and neohesperidin) during extraction process. Based on fused data blocks, fusion partial least squares (PLS) models were established. Two fusion data blocks are obtained from the concatenation of original spectra (low-level data fusion) and the concatenation of characteristic variables based on band selection (mid-level data fusion) respectively. The results indicated that for all seven analytes, the mid-level data fusion models were superior to the single spectral models, with the prediction performance significantly improved. Specifically, the coefficients of determination (R_p² and R_t²) of NIR, MIR and fusion quantitative models were all higher than 0.95. The relative standard errors of prediction (RSEP) values were all within 10%, except for models of neohesperidin, which were 10.76%, 12.39%, 12.05%, 10.03% for NIR, MIR, low-level and mid-level models respectively. These results demonstrate that it is feasible to monitor the extraction process of Xiao'er Xiaoji Zhike Oral Liquid more accurately and rapidly by fusing NIR and MIR spectroscopy, and the proposed approach also has vital and valuable reference value for the rapid monitoring of the mixed decoction process of other TCM.

Challenges and Opportunities of Implementing Data Fusion in Process Analytical Technology-A Review

The release of the FDA's guidance on Process Analytical Technology has motivated and supported the pharmaceutical industry to deliver consistent quality medicine by acquiring a deeper understanding of the product performance and process interplay. The technical opportunities to reach this high-level control have considerably evolved since 2004 due to the development of advanced analytical sensors and chemometric tools. However, their transfer to the highly regulated pharmaceutical sector has been limited. To this respect, data fusion strategies have been extensively applied in different sectors, such as food or chemical, to provide a more robust performance of the analytical platforms. This survey evaluates the challenges and opportunities of implementing data fusion within the PAT concept by identifying transfer opportunities from other sectors. Special attention is given to the data types available from pharmaceutical manufacturing and their compatibility with data fusion strategies. Furthermore, the integration into Pharma 4.0 is discussed.

Hyperspectral imaging in combination with data fusion for rapid evaluation of tilapia fillet freshness

The potential of two different hyperspectral imaging systems (visible near infrared spectroscopy (Vis-NIR) and NIR) was investigated to determine TVB-N contents in tilapia fillets during cold storage. With Vis-NIR and NIR data, calibration models were established between the average spectra of tilapia fillets in the hyperspectral image and their corresponding TVB-N contents and optimized with various variable selection and data fusion methods. Superior models were obtained with variable selection methods based on low-level fusion data when compared with the corresponding methods based on single data blocks. Mid-level fusion data achieved the best model based on CARS, in comparison with all others. Finally, the respective optimized models of single Vis-NIR and NIR data were employed to visualize TVB-N contents distribution in tilapia fillets. In general, the results showed the great feasibility of hyperspectral imaging in combination with data fusion analysis in the nondestructive evaluation of tilapia fillet freshness.

A fast and effective approach for the discrimination of garlic origin using wooden-tip electrospray ionization mass spectrometry and multivariate classification

This paper presents the combination of wooden-tip electrospray ionization mass spectrometry (WTESI-MS) and multivariate pattern recognition methods (principal component analysis, PCA and partial least squares discriminant analysis, PLS-DA) for the rapid and reliable discrimination, via chemical fingerprints, of garlic origin. A total of 312 garlic samples grown in different countries (Brazil, China, Argentina, Spain, and Chile) were studied. The methodology was based on a direct sampling approach, which relies on loading the sample by penetrating the garlic cloves with a pre-wetted wooden tip, followed by direct prompt analysis by WTESI-MS. Thus, no sample preparation is needed, which prevents the degradation of important metabolites and increases the analytical throughput. Parameters that affects the WTESI were optimized and the best performance in terms of signal stability and intensity was achieved using the positive ion mode. Most of the ions in WTESI mass spectra were assigned to amino acids, sugars, organosulfur compounds, and lipids. The discriminative model showed good performance (accuracy rates between 81.9% and 98.6%) and enabled identifying diagnostic ions for garlic samples from different origins. The differentiation and classification of garlic origin is of major importance as this food flavoring product is widely consumed, with worldwide trade representing billions of dollars every year, and is very often the subject of fraud.