Dual modification of various starches: Synthesis, properties and applications

Impact of hydrodynamic cavitation-assisted microbubble with N2, CO2, and air on pasting, morphological, and thermal properties of starches from different botanical origins

Microbubble-assisted starch modification (MASM) using different gases (N2, CO2 and air) was employed to assess the effects of hydrodynamic cavitation (HC) on various botanical starches, including potato, wheat, corn and rice. SEM showed that N2- and CO2- microbubbles created more pronounced holes and cracks on the starch surfaces than air-microbubbles. The hydrodynamic cavitation-assisted microbubble (HCAM) treatment significantly reduced the amorphous and crystalline structures in potato and wheat starches, with less impact observed in corn and rice. This structural reduction was consistent with the observed decrease in the ratio 1047 /1022 cm- 1 after HCAM treatment. According to RVA, the increased viscosity of the starch samples following HCAM was consistent with their enhanced swelling power. The effect of MASM on starch structures decreased as N2-MASM > CO2-MASM > air-MASM, likely due to the microbubbles' higher stability and ζ potential. DSC indicated a significantly lower gelatinization temperature and enthalpy in HASM-treated samples, suggesting substantial disruption of the granular starch structures. The digestibility index depicted that rapidly digesting starch (RDS) enhanced after HCAM. Hydrodynamic cavitation demonstrates as considerable potential in modifying a variety of botanical starches, making it highly suitable for large-scale food industries. Additionally, it can enhance starch's functional properties in food and non-food products, broadening its application range.

Multiscale insights into the role of water content in the extrusion-crosslinked starch

Water content is a key factor in the extrusion-crosslinking process, profoundly influencing the modification and structural properties of starch. The specific effects of water content have not been sufficiently emphasized in the extrusion-crosslinking process, limiting the high-value utilization of starch. This study elucidates the mechanisms of extrusion crosslinking under varying water contents through multiscale analysis, revealing that water content directly affects starch modification. As water content increases, starch crystallinity and molecular degree of order decrease, while the proportion of short-chain structures increases. Higher water content (≥45 %) improves starch melt fluidity and molecular chain mobility, promotes crosslinking, and results in starch gels with superior viscoelastic properties. However, excessive water content (85 %) decreases gel strength and crosslinking efficiency. Molecular simulations complemented the experimental results, showing that water modulates hydrogen bonding and starch molecular mobility. At 65 % moisture content, the crosslinking bonds exhibited the highest and narrowest peak, indicating a higher proportion of crosslinking bonds and greater bond stability. This multiscale analysis highlights the importance of combining molecular simulations and experimental methods to better understand the role of water in starch modification. These results provide insights into the optimization of starch processing and guidance for the sustainable use of starch applications.

Physical modification of corn and potato starches using soaking, freezing, and drying

Effects of continuous soaking, freezing, and drying on physicochemical properties of corn and potato starches were investigated to prove potentials of sequential physical modification method. High temperature soaking showed the higher swelling power than low temperature soaking in both starches right after soaking. Freezing did not significantly rearrange the molecular structure of both starches. Drying greatly change the physicochemical properties of both starches in the order of freeze, air and spray dryings. Consequently, sequential treatment of soaking, freezing, and drying lowered RVA pasting characteristics (peak viscosity, breakdown, setback) as well as amylopectin melting transition temperature compared to native starch. Particularly, potato starch showed more significant change than corn starch, possibly due to the differences in water absorption, amylose content, crystallinity, granule size, etc. Overall, high temperature soaking and freeze drying significantly change the RVA, DSC and XRD characteristics in the sequential treatment of soaking, freezing and drying of starches.

Effect of strengthening agents on properties of dual-modified cassava starch-based degradable films

Insufficient hydrophobicity and mechanical properties pose significant challenges in the development of starch-based degradable films. This study prepared modified (crosslinked, acetylated, and crosslinked & acetylated) cassava starch films, and different concentrations of strengthening agents (polyvinyl alcohol, sodium alginate, gelatin, and hyaluronic acid) were added to produce modified starch composite films. The physical properties, structure characteristics, and degradability of these films were systematically evaluated. The dual-modified (crosslinked & acetylated) starch film exhibited superior hydrophobic properties (contact angle = 90.04°), and the addition of strengthening agents significantly enhanced the tensile strength of the composite films (p < 0.05). Fourier transform infrared spectra confirmed that the strengthening agents interacted with starch through hydrogen bonding. Additionally, the hyaluronic acid-starch composite film exhibited the most rapid degradation in soil (53 % weight loss after 30 days of storage) and achieved the highest comprehensive score for physical properties. This film combined exceptional hydrophobicity and mechanical properties, making it an ideal candidate for food packaging applications. These findings suggest that the hyaluronic acid-starch composite film has broad potential applications in the field of degradable food packaging films.

Effects of Fermentation Modification and Combined Modification with Heat-Moisture Treatment on the Multiscale Structure, Physical and Chemical Properties of Corn Flour and the Quality of Traditional Fermented Corn Noodles

This study investigates the effects of fermentation modification and combined modification with heat-moisture treatment (HMT) on the multiscale structure, physical and chemical properties, and quality of corn flour in the production of traditional fermented corn noodles (TFCNs). The results indicate that after fermentation modification, the starch granule size decreased while the amylopectin proportion increased. Fermentation also enhanced the relative crystallinity and short-range order of the starch, along with an increase in resistant digestion components and ester content in the noodles. After combined modification with HMT, starch granules lost their spherical, intact structure, underwent melting and reorganization, and displayed an increase in particle size. These changes led to a significant improvement in the thermal stability and textural properties of corn flour, resulting in noodles with enhanced cooking quality. Furthermore, the combined modification significantly increased the contents of flavor compounds such as aldehydes, acids, and alcohols in the noodles while reducing olefin and alkane levels, thus contributing to improved flavor development. These findings demonstrate that fermentation modification and combined modification with HMT play a crucial role in enhancing the multiscale structure and physical and chemical properties of corn starch, thereby improving the quality of TFCN.

Effects of color protection and enzymatic hydrolysis on the microstructure, digestibility, solubility and swelling degree of chestnut flour

Chestnuts, despite their nutritional value, pose challenges in starch processing, digestion, and absorption. This study employed various color-fixing formulations and processing methods to simulate the in vitro digestion of both untreated and enzymatically hydrolyzed chestnut flour. Changes in starch properties, digestion characteristics, and estimated glycemic index (eGI) were analyzed to understand how enzymatic hydrolysis affects chestnut flour properties. The results showed that the browning of chestnut flour was the least when the mass ratio of vitamin C, citric acid, and EDTA-Na2 was 9:1:0.3. Following treatment with pullulanase and glucoamylase, the content of rapidly digestible starch decreased to 10 %, while the content of slowly digestible starch and resistant starch increased to 62 % and 27 %, respectively. The eGI value of chestnut flour after enzymatic hydrolysis increased to 61.85-65.14, the hydrolysis rate was 78.37 %-89.20 %, the water holding capacity was 5.3-8.6, the solubility was 51.33 %-58.33 %, and the swelling degree decreased to 2.21-3.33 mL/g.

Combined role of stearic acid and maleic anhydride in the development of thermoplastic starch-based materials with ultrahigh ductility and durability

The diverse properties reported for starch-based materials indicate their potential for use in the preparation of biodegradable flexible actuators. However, their natural brittleness and lack of durability after modification limit their practical application. Therefore, we propose a strategy for preparing flexible starch-based composites. The results of macro/micro property characterizations and molecular dynamics simulations indicated that using starch, maleic anhydride, and stearic acid (SA), the mobility of the starch chains was enhanced and retrogradation was inhibited through the synergistic effects induced by chain breaking, complex formation with SA, and esterification of the starch molecules. In addition, the elongation at break of the modified starch (MS) reached 2070 %, and considerable ductility (>1000 %) as well as well-complexed structure were maintained after six months. Furthermore, the MS was able to undergo self-healing after fracture or a temperature-controlled stiffness transition. Moreover, it underwent complete degradation in soil within 30 d. Finally, an actuator was prepared by doping the MS with nano-Fe3O4 particles to realize a dual magnetic and optical response. Dynamic monitoring was also achieved based on the electrical signal, thereby demonstrating the broad application scope of this material in the development of biodegradable flexible actuators.

Resistant starch from yam: Preparation, nutrition, properties and applications in the food sector

Yam is a significant staple food and starch source, particularly in tropical and subtropical regions, holding the fourth position among the world's top ten tuber crops. Yam tubers are rich in essential nutrients and a diverse range of beneficial plant compounds, which contribute to their multifaceted beneficial functions. Furthermore, the abundant starch and resistant starch (RS) content in yam can fulfil the market demand for RS. The inherent and modified properties of yam starch and RS make them versatile ingredients for a wide range of food products, with the potential to become one of the most cost-effective raw materials in the food industry. In recent years, research on yam RS has experienced progressive expansion. This article provides a comprehensive summary of the latest research findings on yam starch and its RS, elucidating the feasibility of commercial RS production and the technology's impact on the physical and chemical properties of starch. Yam has emerged as a promising reservoir of tuber starch for sustainable RS production, with thermal, chemical, enzymatic and combination treatments proving to be effective manufacturing procedures for RS. The adaptability of yam RS allows for a wide range of food applications.

Plant mucus-derived microgels: Blood-triggered gelation and strong hemostatic adhesion

Arrest of bleeding usually applies clotting agents to trigger coagulation procedures or adhesives to interrupt blood flow through sealing the vessel; however, the efficiency is compromised. Here, we propose a concept of integration of hemostasis and adhesion via yam mucus's microgels. The mucus microgels exhibit attractive attributes of hydrogel with uniform size and shape. Their shear-thinning, self-healing and strong adhesion make them feasible as injectable bioadhesion. Exceptionally, the blood can trigger the microgels' gelation with the outcome of super extensibility, which leads to the microgels a strong hemostatic agent. We also found a tight gel adhesive layer formed upon microgels' contacting the blood on the tissue, where there is the coagulation factor XIII triggered to form a dense three-dimensional fibrin meshwork. The generated structures show that the microgels look like hard balls in the dispersed phase into the blood-produced fibrin mesh of a soft net phase. Both phases work together for a super-extension gel. We demonstrated the microgels' fast adhesion and hemostasis in the livers and hearts of rabbits and mini pigs. The microgels also promoted wound healing with good biocompatibility and biodegradability.

Enhancing starch functionality through synergistic modification via sequential treatments with cold plasma and electron beam irradiation

The impact of dual sequential modifications using radio-frequency (RF) plasma and electron beam irradiation (EBI) on starch properties was investigated and compared with single treatments within an irradiation dose range of 5-20 kGy. Regardless of sequence, dual treatments synergistically affected starch properties, increasing acidity, solubility, and paste clarity, while decreasing rheological features with increasing irradiation dose. The molecular weight distribution was also synergistically influenced. Amylopectin distribution broadened particularly below 10 kGy. Amylose narrowed its distribution across all irradiation doses. This was due to dominating EBI-induced degradation and molecular rearrangements from RF plasma. With the highest average radiation-chemical yield (G) and degradation rate constant (k) of (2.12 ± 0.14) × 10-6 mol·J-1 and (3.43 ± 0.23) × 10-4 kGy-1, respectively, upon RF plasma pre-treatment, amylose underwent random chain scission. In comparison to single treatments, dual modification caused minor alterations in spectral characteristics and crystal short-range order structure, along with increased granule aggregation and surface irregularities. The synergistic effect was dose-dependent, significant up to 10 kGy, irrespective of treatment sequence. The highest synergistic ratio was observed when RF plasma preceded irradiation, demonstrating the superior efficiency of plasma pre-treatment in combination with EBI. This synergy has the potential to lower costs and extend starch's technological uses by enhancing radiation sensitivity and reducing the irradiation dose.

Characterizations and film-forming properties of different fractionated high-amylose maize starches subjected to hydroxypropylation

Dual-modifications of jet milling and hydroxypropylation were used to improve the functional properties of maize starch (HM, containing 67 % amylose). The fractions obtained in three sizes (HM-S, HM-M, HM-L) were further treated with 10 % and 30 % propylene oxide (PO10 and PO30). The infrared peak of starch at 2794 cm-1 indicated the successful introduction of hydroxypropyl groups. The molar degree of substitution (MS) increased with the degree of jet milling. The MS of HM-L-PO10 is 0.4, that of HM-M-PO10 is 0.7, and that of HM-S-PO10 is 0.9. The crystallinity of dual-modified HM increased, but the crystal type remained unchanged, still being B-type. Dual-modification significantly improved the performance of starch, and the higher the degree of modification, the better the optimization effect. The lowest enthalpy changes of gelatinization (ΔH = 3.49 J/g), the best freeze-thaw stability, the highest elongation at break (110.42 %) and transmittance (81.22 %) were shown in HM-S-PO30. The present study confirms that HM-S-PO30 films have the best physicochemical and mechanical properties, which provide new insights into optimizing starch-based packaging materials.

Effect of dynamic high-pressure treatments on the multi-level structure of starch macromolecule and their techno-functional properties: A review

Over the past decades, dynamic high-pressure treatment (DHPT) executed by high-pressure homogenization (HPH) or microfluidization (DHPM) technology has received humongous research attention for starch macromolecule modification. However, the studies on starch multi-level structure alterations by DHPT have received inadequate attention. Furthermore, no review comprehensively covers all aspects of DHPT, explicitly addressing the combined effects of both technologies (HPH or DHPM) on starch's structural and functional characteristics. Hence, this review focused on recent advancements concerning the influences of DHPT on the starch multi-level structure and techno-functional properties. Intense mechanical actions induced by DHPT, such as high shear and impact forces, hydrodynamic cavitation, instantaneous pressure drops, and turbulence, altered the multi-level structure of starch for a short duration. The DHPT reduces the starch molecular weight and degree of branching, destroys short-range ordered and long-range crystalline structure, and degrades lamellar structure, resulting in partial gelatinization of starch granules. These structural changes influenced their techno-functional properties like swelling power and solubility, freeze-thaw stability, emulsifying properties, retrogradation rate, thermal properties, rheological and pasting, and digestibility. Processing conditions such as pressure level, the number of passes, inlet temperature, chamber geometry used, starch types, and their concentration may influence the above changes. Moreover, dynamic high-pressure treatment could form starch-fatty acids/polyphenol complexes. Finally, we discuss the food system applications of DHPT-treated starches and flours, and some limitations.

Recent advances in modified starch based biodegradable food packaging: A review

This study reviews the importance of resistant starch (RS) as the polymer of choice for biodegradable food packaging and highlights the RS types and modification methods for developing RS from native starch (NS). NS is used in packaging because of its vast availability, low cost and film forming capacity. However, application of starch is restricted due to its high moisture sensitivity and hydrophilic nature. The modification of NS into RS improves the film forming characteristics and extends the applications of starch into the formulation of packaging. The starch is blended with other bio-based polymers such as guar, konjac glucomannan, carrageenan, chitosan, xanthan gum and gelatin as well as active ingredients such as nanoparticles (NPs), plant extracts and essential oils to develop hybrid biodegradable packaging with reduced water vapor permeability (WVP), low gas transmission, enhanced antimicrobial activity and mechanical properties. Hybrid RS based active packaging is well known for its better film forming properties, crystalline structures, enhanced tensile strength, water resistance and thermal properties. This review concludes that RS, due to its better film forming ability and stability, can be utilized as polymer of choice in the formulation of biodegradable packaging.

Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from Dioscorea remotiflora Tubers

Biocomposites were fabricated utilizing polylactic acid (PLA) combined with native starch sourced from mountain's yam (Dioscorea remotiflora Knuth), an underexplored tuber variety. Different starch compositions (7.5, 15.0, 22.5, and 30.0 wt.%) were blended with PLA in a batch mixer at 160 °C to produce PLA/starch biocomposites. The biocomposites were characterized by analyzing their morphology, particle size distribution, thermal, X-ray diffraction (XDR), mechanical, and dynamic mechanical (DMA) properties, water absorption behavior, and color. The results showed that the amylose content of Dioscorea remotiflora starch was 48.43 ± 1.4%, which corresponds to a high-amylose starch (>30% of amylose). Particle size analysis showed large z-average particle diameters (Dz0) of the starch granules (30.59 ± 3.44 μm). Scanning electron microscopy (SEM) images showed oval-shaped granules evenly distributed throughout the structure of the biocomposite, without observable agglomeration or damage to its structure. XDR and DMA analyses revealed an increase in the crystallinity of the biocomposites as the proportion of the starch increased. The tensile modulus (E) underwent a reduction, whereas the flexural modulus (Eflex) increased with the amount of starch incorporated. The biocomposites with the highest Eflex were those with a starch content of 22.5 wt.%, which increased by 8.7% compared to the neat PLA. The water absorption of the biocomposites demonstrated a higher uptake capacity as the starch content increased. The rate of water absorption in the biocomposites followed the principles of Fick's Law. The novelty of this work lies in its offering an alternative for the use of high-amylose mountain's yam starch to produce low-cost bioplastics for different applications.

Structure and functional properties of taro starch modified by dry heat treatment

Taro starch (TS) was modified by dry heat treatment (DHT) for different periods (1, 3, 5, and 7 h at 130 °C) and temperatures (90, 110, 130, and 150 °C for 5 h) to expand its applications in food and other industries. The structure and functional properties of DHT-modified TS were characterized. It was found that TS granules became agglomerated after DHT, and the particle size, amylose content, solubility, and retrogradation enthalpy change of TS increased with increasing dry heating time and temperature, whereas the relative crystallinity, molecular weight, swelling power, gelatinization temperature, and enthalpy change decreased. The absorbance ratio of 1047 cm-1/1022 cm-1 for DHT-modified TS (except at 7 h) was higher than that of native TS. DHT increased the contact angle of TS in a time- and temperature-dependent manner. At a moderate strength, DHT increased the pasting viscosity, relative setback value, and storage modulus but decreased the relative breakdown value. Moreover, DHT (except at 150 °C) caused a decrease in the rapid digestive starch content and estimated glycemic index of TS. These results suggested that DHT-modified TS could be used in foods with high viscosity requirements, gel foods, and low-glycemic index starch-based foods.

Application and functional properties of millet starch: Wet milling extraction process and different modification approaches

In the past decade, the demand and interest of consumers have expanded for using plant-based novel starch sources in different food and non-food processing. Therefore, millet-based value-added functional foods are acquired spare attention due to their excellent nutritional, medicinal, and therapeutic properties. Millet is mainly composed of starch (amylose and amylopectin), which is primary component of the millet grain and defines the quality of millet-based food products. Millet contains approximately 70 % starch of the total grain, which can be used as a, ingredient, thickening agent, binding agent, and stabilizer commercially due to its functional attributes. The physical, chemical, and enzymatic methods are used to extract starch from millet and other cereals. Numerous ways, such as non-thermal physical processes, including ultrasonication, HPP (High pressure processing) high-pressure, PEF (Pulsed electric field), and irradiation are used for modification of millet starch and improve functional properties compared to native starch. In the present review, different databases such as Scopus, Google Scholar, Research Gate, Science Direct, Web of Science, and PubMed were used to collect research articles, review articles, book chapters, reports, etc., for detailed study about millet starch, their extraction (wet milling process) and modification methods such as physical, chemical, biological. The impact of different modification approaches on the techno-functional properties of millet starch and their applications in different sectors have also been reviewed. The data and information created and aggregated in this study will give users the necessary knowledge to further utilize millet starch for value addition and new product development.

Ultrasound-assisted starch hydrolyzing by alpha-amylase: Implementation of computational fluid dynamics, acoustic field determination, and rheology modeling

The study aimed to optimize the ultrasonic-assisted modification (UAM) of corn and potato starch by assessing the influence of ultrasound geometry, power, and frequency on the fluid flow for sonicated starch to achieve porous starch with a higher degree of hydrolyzing by α-amylase. This assessment was conducted through mathematical modeling and 3D computational fluid dynamics (CFD) simulations. The ultrasonic pressure field is determined by the solution of the non-linear Westervelt equation in the frequency domain. Then, the obtained field is utilized to simulate the dissipated power and flow field characteristics. According to the results obtained from the Rapid Visco Analyzer (RVA), it was observed that the peak and final viscosity of hydrolyzed sonicated starch were less than hydrolyzed native starch. This decrease in viscosity indicates a breakdown of the starch structure, leading to a more fluid-like consistency. The shear rate and shear stress data are used for rheology modeling. The fluid's viscosity is represented based on three models of Herschel-Bulkley, Casson, and Power law (Ostwald-de Waele). The magnitude of yield shear stress at low shear rates, the shear-thinning behavior, and the nearly Newtonian fluid nature at high shear rates are extracted from the viscosity models. The surfaces of the starch granules were analyzed using scanning electron microscopy (SEM) revealed that sonication treatments caused damage, cracks, and porosity on the surfaces of the starch granules which were prone to amylolytic enzymes. This indicates that the structural integrity of the granules was compromised and facilitated enzyme penetration. This study proposes that ultrasonication can be utilized to produce damaged starch, which is susceptible to hydrolysis by α-amylase. This approach holds the potential for reducing enzyme consumption in various industries.

Effect of Konjac Glucomannan on Structure, Physicochemical Properties, and In Vitro Digestibility of Yam Starch during Extrusion

In this study, the effect of konjac glucomannan (KGM, 0-5%) on the structure, physicochemical properties, and in vitro digestibility of extruded yam starch (EYS) was investigated. The EYS became rougher on the surface and the particle size increased as observed using scanning electron microscopy and particle size analysis. X-ray diffraction and Raman results revealed that the relative crystallinity (18.30% to 22.30%) of EYS increased, and the full width at half maxima at 480 cm-1 decreased with increasing KGM content, indicating the increment of long-range and short-range ordered structure. Differential scanning calorimetry and rheological results demonstrated that KGM enhanced thermal stability and the gel strength of EYS due to enhanced interaction between KGM and YS molecules. Additionally, a decrease in the swelling power and viscosity of EYS was observed with increased KGM content. The inclusion of KGM in the EYS increased the resistant starch content from 11.89% to 43.51%. This study provides a dual-modified method using extrusion and KGM for modified YS with high thermal stability, gel strength, and resistance to digestion.

Structural and property changes of starch derivatives under microwave field: A review

Native starches are commonly modified for desired properties because of their limited applications. Among various modifications, microwave irradiation has been gaining strong interests and becoming a focal area to transform starch during the last few years. Such interests reside in microwave irradiation's high heating rates, lesser extent of loss in nutritional qualities, and so on when compared with other approaches. This review summaries the effects of microwave field on the structural (e.g. morphology characteristic, lamellae structure, crystallinity, and molecular structure) and physicochemical properties (e.g. pasting properties and gelatinization) of naturally existing starch derivatives. Different microwave-assisted chemical derivatizations can directly or indirectly affect starch structure from the macroscopic to the microscopic level, thereby resulting in various functionalities. Moreover, conventional starch modification processes can be optimized by applying microwave irradiation to obtain modified starch with high degree of substitution and low viscosity. The future research will help to better understand the structural changes of microwave-assisted starch chemical derivatization and thereby creating a wide range of functionalities.

Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects

Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.

Regulating the physicochemical, structural characteristics and digestibility of potato starch by complexing with different phenolic acids

The effects of ferulic acid (FA), protocatechuic acid (PA), and gallic acid (GA) on the physicochemical characteristics, structural properties, and in vitro digestion of gelatinized potato starch (PS) were investigated. Rapid viscosity analysis revealed that the gelatinized viscosity parameters of PS decreased after complexing with different phenolic acids. Dynamic rheology results showed that phenolic acids could reduce the values of G' and G″ of PS-phenolic acid complexes, demonstrating that the addition of phenolic acids weakened the viscoelasticity of starch gel. Fourier-transform infrared spectra and X-ray diffraction results elucidated that phenolic acids primarily reduced the degree of short-range ordered structure of starch through non-covalent interactions. The decrease in thermal stability and the more porous microstructure of the complexes confirmed that phenolic acids could interfere with the gel structure of the starch. The addition of different phenolic acids decreased the rapidly digestible starch (RDS) content and increased the resistant starch (RS) content, with GA exhibiting the best inhibitory capacity on starch in vitro digestibility, which might be associated with the number of hydroxy groups in phenolic acids. These results revealed that phenolic acids could affect the physicochemical characteristics of PS and regulate its digestion and might be a potential choice for producing slow digestibility starch foods.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

Fabrication and study on dually modified starch embedded in alginate hydrogel as an encapsulation system for Satureja essential oil

This study aimed to investigate how the types and order of modifications influence the structure and physicochemical characteristics of modified porous starch. The work focuses on the encapsulation of essential oil in hydrophobic microcapsules embedded in sodium alginate hydrogels. FTIR spectra indicated successful esterification of starch with OSA. 1047:1022 cm-1 and 1022:995 cm-1 band ratios of FTIR spectra revealed increased crystallinity due to enzymatic modification, supported by XRD patterns. Porous-OSA (PO) starch had 1.5 times higher degree of substitution (DS) than OSA-porous (OP) starch, confirmed by the intense peak at 0.85 ppm in 1H NMR spectra. SEM images displayed larger particles and smaller pore diameter in OP compared to PO and porous starch, indicating amylolytic enzyme inhibition by OSA. Loading efficiency (LE) showed no significant difference between OP and PO microcapsules (≈70 %), both significantly higher other starch microcapsules. OP and PO microcapsules exhibited sustained release, with enhanced antibacterial activity. Alginate hydrogels preserved about 60 % antioxidant and 90 % antibacterial activities of SEO against 2 h of UV radiation. These findings suggest that the order of modification could not affect the functional properties of final microcapsules. Additionally, the importance of alginate hydrogels as the protective and second wall material was disclosed.

Enzymes Immobilized into Starch- and Gelatin-Based Hydrogels: Properties and Application in Inhibition Assay

The present work is a review of the research on using hydrogels based on natural biodegradable polymers, starch, and gelatin for enzyme immobilization. This review addresses the main properties of starch and gelatin that make them promising materials in biotechnology for producing enzyme preparations stable during use and storage and insensitive to chemical and physical impacts. The authors summarize their achievements in developing the preparations of enzymes immobilized in starch and gelatin gels and assess their activity, stability, and sensitivity for use as biorecognition elements of enzyme inhibition-based biosensors.

Characterization and Evaluation of Heat-Moisture-Modified Black and Red Rice Starch: Physicochemical, Microstructural, and Functional Properties

This study sought to evaluate starch from black and red rice modified by heat-moisture, investigating the extraction yield, starch and amylose content, color, and phenolic compounds. The water and oil absorption capacity, whole milk and zero lactose absorption index, syneresis index, and texture were also analyzed. Microstructural analysis included Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The heat-moisture treatment (HMT) reduced the extraction yield and the starch and amylose content, with native black rice starch having the highest values for these parameters. The modification also affected the color and phenolic compounds of the starch, making it darker and changing its appearance. The modification improved the absorption of water, oil, and milk, reducing syneresis and increasing stability during storage. The starch surface was altered, especially for modified black rice starch, with larger agglomerates. The type of starch also changed from A to Vh, with lower relative crystallinity. The textural properties of modified red rice starch were also significantly altered. The HMT proved to be a viable and economical option to modify the analyzed parameters, influencing the texture and physicochemical properties of pigmented rice starch, expanding its applications, and improving its stability during storage at temperatures above 100 °C.

Chemically Modified Starches as Food Additives

Starch is a renewable and multifunctional polysaccharide biopolymer that is widely used both in the food industry and other areas of the economy. However, due to a number of undesirable properties in technological processes, it is subjected to various modifications. They improve its functional properties and enable the starch to be widely used in various industries. A modified starch is a natural starch that has been treated in a way that changes one or more of its initial physical and/or chemical properties. Chemical modification consists of the introduction of functional groups into starch molecules, which result in specific changes in the physicochemical and functional properties of starch preparations. The bases of chemical modifications of starch are oxidation, esterification or etherification reactions. In terms of functionality, modified preparations include cross-linked and stabilized starches. These starches have the status of allowed food additives, and their use is strictly regulated by relevant laws. Large-scale scientific research is aimed at developing new methods of starch modification, and the use of innovative technological solutions allows for an increasingly wider use of such preparations. This paper characterizes chemically modified starches used as food additives, including the requirements for such preparations and the directions of their practical application. Health-promoting aspects of the use of chemically modified starches concerning resistant starch type RS4, encapsulation of bioactive ingredients, starch fat substitutes, and carriers of microelements are also described. The topic of new trends in the use of chemically modified starches, including the production of biodegradable films, edible coatings, and nanomaterials, is also addressed.

Modification of Starches and Flours by Acetylation and Its Dual Modifications: A Review of Impact on Physicochemical Properties and Their Applications

Various modification treatments have been carried out to improve the physicochemical and functional properties of various types of starch and flour. Modification by acetylation has been widely used to improve the quality and stability of starch. This review describes the effects of acetylation modification and its dual modifications on the physicochemical properties of starch/flour and their applications. Acetylation can increase swelling power, swelling volume, water/oil absorption capacity, and retrogradation stability. The dual modification of acetylation with cross-linking or hydrothermal treatment can improve the thermal stability of starch/flour. However, the results of the modifications may vary depending on the type of starch, reagents, and processing methods. Acetylated starch can be used as an encapsulant for nanoparticles, biofilms, adhesives, fat replacers, and other products with better paste stability and clarity. A comparison of various characteristics of acetylated starches and their dual modifications is expected to be a reference for developing and applying acetylated starches/flours in various fields and products.

Native and modified starches from underutilized seeds: Characteristics, functional properties and potential applications

Seeds represent a potential source of starch, containing at least 60-70% of total starch, however many of them are treated as waste and are usually discarded. The review aim was to analyze the characteristics, functional properties, and potential applications of native and modified starches from underutilized seeds such as Sorghum bicolor L. Moench (WSS), Chenopodium quinoa, Wild. (QSS), Mangifera indica L. (MSS), Persea americana Mill. (ASS), Pouteria campechiana (Kunth) Baehni (PCSS), and Brosimum alicastrum Sw. (RSS). A systematic review of scientific literature was carried out from 2014 to date. Starch from seeds had yields above 30%. ASS had the higher amylose content and ASS and RSS showed the highest values in water absorption capacity and swelling power, contrary to MSS and PCSS while higher thermal resistance, paste stability, and a lower tendency to retrograde were observed in MSS and RSS. Functional properties such as water solubility, swelling power, thermal stability, low retrogradation tendency, and emulsion stability were increased in RSS, WSS, QSS, and MSS with chemical modifications (Oxidation, Oxidation-Crosslinking, OSA, DDSA, and NSA) and physical methods (HMT and dry-heat). Digestibility in vitro showed that WSS and QSS presented high SDS fraction, while ASS, MSS, PCSS, and HMT-QSS presented the highest RS content. Native or modified underutilized seed starches represent an alternative and sustainable source of non-conventional starch with potential applications in the food industry and for the development of healthy foods or for special nutritional requirements.

White finger millet starch: Hydrothermal and microwave modification and its characterisation

White finger millet (WFM) starch was modified by hydrothermal (HS) and microwave (MS) methods. Modification methods had a significant change in the b* value observed in the HS sample, and it caused the higher chroma (∆C) value. The treatments have not significantly changed the chemical composition and water activity (aw) of native starch (NS) but reduced the pH value. The gel hydration properties of modified starch enhanced significantly, especially in the HS sample. The least NS gelation concentration (LGC) of 13.63 % increased to 17.74 % in HS and 16.41 % in MS. The pasting temperature of the NS got reduced during the modification process and altered the setback viscosity. The starch samples exhibit the shear thinning behavior and reduce starch molecules' consistency index (K). FTIR results exhibit that the modification process highly altered the short-range order of starch molecules more than the double helix structure. A significant reduction in relative crystallinity was observed in the XRD diffractogram, and the DSC thermogram depicts the significant change in the hydrogen bonding of starch granules. It can be inferred that the HS and MS modification method significantly alters the properties of starch, which can increase the food applications of WFM starch.

The role and mechanism of electron beam irradiation in glutaric anhydride esterified proso millet starch: Multi-scale structure and physicochemical properties

To investigate the effect of electron beam irradiation (EBI) pretreatment on the multiscale structure and physicochemical properties of esterified starch, this study used EBI pretreatment to prepare glutaric anhydride (GA) esterified proso millet starch. GA starch did not show the corresponding distinct thermodynamics peaks. However, it had a high pasting viscosity and transparency (57.46-74.25 %). EBI pretreatment increased the degree of glutaric acid esterification (0.0284-0.0560) and changed its structure and physicochemical properties. EBI pretreatment disrupted its short-range ordering structure, reducing the crystallinity, molecular weight and pasting viscosity of glutaric acid esterified starch. Moreover, it produced more short chains and increased the transparency (84.28-93.11 %) of glutaric acid esterified starch. This study could offer a rationale for using EBI pretreatment technology to maximize the functional properties of GA modified starch and enlarge its implementation in modified starch.

Debranching facilitates malate esterification of waxy maize starch and decreases the digestibility

In this study, the debranching followed by malate esterification was employed to prepare malate debranched waxy maize starch (MA-DBS) with a high degree of substitution (DS) and low digestibility using malate waxy maize starch (MA-WMS) as the control. The optimal esterification conditions were obtained using an orthogonal experiment. Under this condition, the DS of MA-DBS (0.866) was much higher than that of MA-WMS (0.523). A new absorption peak was generated at 1757 cm^-1 in the infrared spectra, indicating the occurrence of malate esterification. Compared with MA-WMS, MA-DBS had more particle aggregation, resulting in an increase in the average particle size from scanning electron microscopy and particle size analysis. The X-ray diffraction results showed that the relative crystallinity decreased after malate esterification, in which the crystalline structure of MA-DBS almost disappeared, which was consistent with the decrease of decomposition temperature by thermogravimetric analysis and the disappearance of the endothermic peak by differential scanning calorimeter. In vitro digestibility tests showed an order: WMS > DBS > MA-WMS > MA-DBS. The MA-DBS showed the highest content of resistant starch (RS) of 95.77 % and the lowest estimated glycemic index of 42.27. In a word, pullulanase debranching could produce more short amylose, promoting malate esterification and improving the DS. The presence of more malate groups inhibited the formation of starch crystals, increased particle aggregation, and enhanced resistance to enzymolysis. The present study provides a novel protocol for producing modified starch with higher RS content, which has potential application in functional foods with a low glycemic index.

Effects of high-speed shear and double-enzymatic hydrolysis on the structural and physicochemical properties of rice porous starch

This study aimed to investigate the physicochemical properties of the rice porous starch (HSS-ES) prepared by high-speed shear combined with double-enzymatic (α-amylase and glucoamylase) hydrolysis, and to reveal their mechanism. The analyses of ¹H NMR and amylose content showed that high-speed shear changed the molecular structure of starch and increased the amylose content (up to 20.42 ± 0.04 %). FTIR, XRD and SAXS spectra indicated that high-speed shear did not change the starch crystal configuration but caused a decrease in short-range molecular order and relative crystallinity (24.42 ± 0.06 %), and a loose semi-crystalline lamellar, which were beneficial to the followed double-enzymatic hydrolysis. Therefore, the HSS-ES displayed a superior porous structure and larger specific surface area (2.962 ± 0.002 m²/g) compared with double-enzymatic hydrolyzed porous starch (ES), resulting in the increase of water and oil absorption from 130.79 ± 0.50 % and 109.63 ± 0.71 % to 154.79 ± 1.14 % and 138.40 ± 1.18 %, respectively. In vitro digestion analysis showed that the HSS-ES had good digestive resistance derived from the higher content of slowly digestible and resistant starch. The present study suggested that high-speed shear as an enzymatic hydrolysis pretreatment significantly enhanced the pore formation of rice starch.

Potentially Health-Promoting Spaghetti-Type Pastas Based on Doubly Modified Corn Starch: Starch Oxidation via Wet Chemistry Followed by Organocatalytic Butyrylation Using Reactive Extrusion

Extruded spaghetti-type pasta systems were obtained separately either from native or oxidized starch prepared via wet chemistry with the aim of evaluating the effect of oxidation modification of starch. In addition to this, the butyrylation reaction (butyrate (Bu) esterification-short-chain fatty acid) using native or oxidized starch was analyzed under reactive extrusion (REx) conditions with and without the addition of a green food-grade organocatalyst (l(+)-tartaric acid) with the purpose of developing potentially health-promoting spaghetti-type pasta systems in terms of increasing its resistant starch (RS) values. These would be due to obtaining organocatalytic butyrylated starch or not, or the manufacture of a doubly modified starch (oxidized-butyrylated-starch oxidation followed by organocatalytic butyrylation) or not. To this end, six pasta systems were developed and characterized by solid-state ¹³C cross-polarization magic angle spinning nuclear magnetic resonance (CP MAS NMR) spectroscopy, degree of substitution (DS), attenuated total reflectance Fourier transform infrared (ATR/FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), pancreatic digestion, free Bu content analysis and in vitro starch digestibility. The results obtained here suggest that starch oxidation hydrolytically degrades starch chains, making them more susceptible to enzymatic degradation by α-amylase. However, the oxidized starch-based pasta systems, once esterified by Bu mainly on the amylose molecules (doubly modified pasta systems) increased their RS values, and this was more pronounced with the addition of the organocatalyst (maximum RS value = ~8%). Interestingly, despite the checked chemical changes that took place on the molecular structure of starch upon butyrylation or oxidation reactions in corn starch-based spaghetti-type pasta systems, and their incidence on starch digestibility, the orthorhombic crystalline structure (A-type starch) of starch remained unchanged.

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.

Phosphorylation and citration of normal corn starch by dry heating with phytic acid and citric acid

Normal corn starch was subjected to dry heating in the presence of phytic acid (PA, 2 %, starch basis) and citric acid (CA, 5 % and 10 %) for modification. Dual treatment with PA and CA induced structural and physicochemical changes in normal corn starch. Phosphorus concentration, degree of substitution, FTIR, and ³¹P NMR analyses confirmed esterification of starch by dry heating with PA and CA. Both phosphorylation and citration by esterification with PA and CA were observed in PA + 5CA starch, but high CA concentration inhibited covalent interaction between PA and starch in PA + 10CA starch. The degree of phosphorylation and citration resulted in different physicochemical properties in starch treated with PA and CA. The treatment with only PA did not change the crystalline regions of PA starch, but CA treatment induced the disruption of the crystalline structure of PA + 5CA and PA + 10CA starch. PA starch showed high solubility (46.41 %) and transmittance (90.51 %), but dual treatment of PA and CA induced significant decrease in solubility (3.23 %) and transmittance (2.18 %) of PA + 10CA starch. CA treatment increased the fraction of resistant starch in non-cooked (72.44 %) and cooked PA + 10CA starch (42.76 %). Therefore, dual treatment with PA and CA had potential to control physicochemical and functional properties of starch by phosphorylation and citration of starch.

Effect of single and dual modifications with cross-linking and octenylsuccinylation on physicochemical, in-vitro digestibility, and emulsifying properties of cassava starch

Native cassava starch (NCS) was chemically modified by cross-linking (CL), octenylsuccinylation (OS), CL followed by OS, and OS followed by CL. The modified cassava starches (MCS) were determined for physicochemical, in-vitro digestibility, and emulsifying properties. For the dual modifications, the functional groups introduced in the first modification were partially replaced by the ones that introduced in the second modification. The X-ray diffraction pattern and relative crystallinity of cassava starch did not change by both modifications, indicating that both reactions occurred predominantly in amorphous regions as well as on the surface of starch granules and did not alter the crystalline pattern in the granules. The physicochemical and emulsifying properties of the dual MCS were predominantly affected by the functional groups introduced in the second modification. For the in-vitro digestibility, the dual MCS exhibited the highest resistant starch content of 19.48-22.00% in comparison with the NCS (6.05%) and the single MCS (10.76-14.49%), possibly due to a synergistic effect of the functional groups introduced in the first and second modifications.

A study on the uptake of methylene blue by biodegradable and eco-friendly carboxylated starch grafted polyvinyl pyrrolidone

This study is based on the removal of methylene blue (MB) from aqueous solution by cost effective and biodegradable adsorbent carboxymethyl starch grafted polyvinyl pyrolidone (Car-St-g-PVP). The Car-St-g-PVP was synthesized by grafting vinyl pyrolidone onto carboxymethyl starch by free radical polymerization reaction. The structure and different properties of Car-St-g-PVP were determined by ¹H NMR, FT-IR, XRD, TGA and SEM. A series of batch experiments were conducted for the removal of MB, The adsorption affecting factors such as temperature, contact time, initial concentration of MB dye, dose of Car-St-g-PVP and pH were studied in detail. The other parameters like the thermodynamic study, kinetics and isothermal models were fitted to the experimental data. The results showed that pseudo 2^nd order kinetics and Langmuir's adsorption isotherms were best fitted to experimental data with regression coefficient R² viz. 0.99 and 0.97. The kinetic study showed that the adsorption mechanism favored chemisorption. The Gibbs free energy (ΔG°) for the adsorption process was found to be -7.31 kJ/mol, -8.23 kJ/mol, -9.00 kJ/mol and -10.10 kJ/mol at 25 °C, 35 °C, 45 °C and 55 °C respectively. The negative values of ΔG° suggested the spontaneous nature of the adsorption process. Similarly, the positive values of entropy (ΔS°) and enthalpy (ΔH°) 91.27 J/k.mol and 19.90 kJ/mol showed the increasing randomness and endothermic nature of the adsorption process. The value of separation factor (R_L) was found to be less than one (RL < 1), which supported the feasibility of the adsorption process. The maximum MB removal percentage (% R) was found to be 98.6%. So, these findings show that Car-St-g-PVP can be meritoriously used for the treatment of MB from wastewater.

Physical modification of maize starch by gelatinizations and cold storage

The effects of gelatinization at three selected temperatures (DSC characteristic peaks temperature: TO, TP, and TC) and subsequent cold storage (CS) treatment on structural characteristics, pasting, and rheological properties of maize starch (MS) were investigated. The pasting, rheological properties of MS was changed with the increase of gelatinization temperature from TO to TC, but were not further significantly changed if the gelatinization temperature was higher than TC. Pasting and thermal properties analysis suggested that gelatinization at TC (TC treatment) significantly increased the gelatinization and pasting temperature of MS. Moreover, TC treatment decreased breakdown viscosity by 8.49 times and setback viscosity by 2.53 times. Dynamic rheological measurements revealed that the TC treatment caused the lower G' and G" of MS, and decreased the thickening coefficient by 55.17 %. These results indicated that TC treatment could enhance the thermal stability properties of MS, inhibiting the shear and short-term retrogradation, the shear-thinning behavior of MS. Interestingly, the CS treatment further inhibited the shear and short-term retrogradation and the shear-thinning behavior of MS. The leaked starch molecules aggregate to form a harder structure after gelatinization and starch molecules were further aggregated after CS treatment, these all were hypothesized to be responsible for these results.

Effect of dual modification with citric acid combined with ultrasonication on hydrolysis kinetics, morphology and structure of corn starch dispersions

Corn starch dispersions (CSD) were hydrolyzed with citric acid and compared with CSD co-treated with citric acid combined with ultrasonication for 1 to 18 days, which are designated as single modification (CSD-SM) and dual modification (CSD-DM), respectively. The logistic functions monitor the dynamics of the hydrolysis advance (%) of the CSD-SM and CSD-DM as a function of time, where the zones most vulnerable to the single-treatment and/or co-treatment of the corn starch granules (CSG) are the amorphous or disordered regions. The characterization results of CSD-DM suggest that the structural changes caused by dual modification affected the morphology, sequence, and microstructure of the CSG. The heterogeneous changes caused by the dual modification changed the configuration of the CSG, generating a kind of destemming of the amorphous lamellae (depolymerization), an increase in the percentage of relative crystallinity of the CSD-DM and an active rearrangement of the intralamellar chains that promoted the relative amount of double helix for 18 days of double modification. The synergistic effect of the dual modification for CSD by the sequential combination of a chemical treatment followed by a physical one improved the hydrolyzed advance by 12 %, the relative crystallinity by 10 %, and the promotion of double helices by 25 % during 18 days of co-treatment.

Physical, Chemical and Biochemical Modification Approaches of Potato (Peel) Constituents for Bio-Based Food Packaging Concepts: A Review

Potatoes are grown in large quantities and are mainly used as food or animal feed. Potato processing generates a large amount of side streams, which are currently low value by-products of the potato processing industry. The utilization of the potato peel side stream and other potato residues is also becoming increasingly important from a sustainability point of view. Individual constituents of potato peel or complete potato tubers can for instance be used for application in other products such as bio-based food packaging. Prior using constituents for specific applications, their properties and characteristics need to be known and understood. This article extensively reviews the scientific literature about physical, chemical, and biochemical modification of potato constituents. Besides short explanations about the modification techniques, extensive summaries of the results from scientific articles are outlined focusing on the main constituents of potatoes, namely potato starch and potato protein. The effects of the different modification techniques are qualitatively interpreted in tables to obtain a condensed overview about the influence of different modification techniques on the potato constituents. Overall, this article provides an up-to-date and comprehensive overview of the possibilities and implications of modifying potato components for potential further valorization in, e.g., bio-based food packaging.

Effect of pH on the Redox and Sorption Properties of Native and Phosphorylated Starches

Starch is a common biopolymer that can be used for removing heavy metal ions from aqueous solutions. A valuable property of starch is its functional diversity, which can be enhanced by chemical modification. Hydroxyl groups enclosed in the starch and formed during hydrolysis act as reducing agents of Cr(VI). The sorption properties of native starch depend mainly on the presence of carboxyl groups formed during redox processes and basic centers created during acid hydrolysis, while the superiority of phosphorylated starch is related to the presence of phosphate groups binding Cr(III) ions. The effectiveness of starch depends on a series of equilibria established in its aqueous suspension and chromate ions solution, where the pH is the driving force for these processes. In this article, a systematic discussion of pH changes being the consequence of chemical reactions unraveling the extraordinary functionalities of starch was given. It also explained the influence of establishing equilibria and chemical modifications of starch on the efficiency of chromium ion removal. This allowed for the development of a comprehensive mechanism for the interaction of Cr(VI) and Cr(III) ions with native and phosphorylated starch.

Effect of enzymatic hydrolysis on digestibility and morpho-structural properties of hydrothermally pre-treated red rice starch

The objective of this work was to evaluate the effects of enzymatic hydrolysis on digestibility and morphological and structural properties of hydrothermally pre-treated (HPT) red rice starch. The pre-treatments were performed in autoclave and cooking for the modification of rice grains and native starch. In vitro starch digestibility was performed consecutively and semi-simultaneously using α-amylase and amyloglucosidase. A first-order mathematical model was used to adjust the hydrolysis kinetic data, which made it possible to calculate the surface area, hydrolysis index, and glycemic index of the starch. Scanning electron microscopy images (SEM), Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD) were also performed to investigate the characteristics of the post-hydrolysis starch samples. The autoclaved starch HSS-A3, which was subjected to 121 °C/1.08 bar for 10 min, showed the highest in vitro digestibility values (80.08 %). Both starch samples showed increase of particle size and enzymatic digestibility after HPT. FTIR spectra of the starch samples showed that there was no appearance of new functional groups. However, XRD evidenced that HPT changed the intensity of the peaks and the type of crystallinity was changed for autoclaved starch (A3) from type A to Vh, with crystallinity ranging from 21.71 % to 26.42 %. The semi-simultaneous approach showed more advantages due to the highest in vitro digestibility as well as reducing the processing time and use of reagents.

Effects of single and dual modifications through electron beam irradiation and hydroxypropylation on physicochemical properties of potato and corn starches

In this study, electron beam irradiation (EBI; 2, 4, 6, 8 and 10 kGy), hydroxypropylation (HP) and dual modification of EBI-HP were applied to modify corn and potato starches. The results showed that the molar substitution (MS) of EBI-HP modified corn and potato starches were in the range of 0.060-0.087 and 0.080-0.124, respectively. After modifications, amylose content of corn (30.0 %) and potato (31.2 %) starches were declined to 24.2-28.1 % and 26.1-29.5 %, respectively, and relative crystallinity was reduced from 35.5 to 30.0 % for corn and 34.1 to 20.2 % for potato. Pasting properties decreased significantly in both starch sources with increasing irradiation dose. EBI decreased springiness, enthalpy of retrograded starch (ΔHr) and percentage of retrogradation (R%) on corn starches, which were different from those effects observed on potato starches. Meanwhile, HP increased peak viscosity up to 312.6 RVU and 1359.3 RVU for corn and potato starches, respectively. Moreover, EBI-HP was highly responsible for the decreases in the textural, gelatinization and retrogradation properties and relative crystallinity in both corn and potato starches. These results enhance the understanding of starch functionality modified by using both physical and chemical methods, and provide further insights on food and non-food applications.

Starch as edible ink in 3D printing for food applications: a review

Three-dimensional (3D) printing has attracted more attention in food industry because of its potential advantages, including the ability to create customized products according to individual's sensory or nutritional requirements. However, the production of high-quality 3D printed foods requires the availability of edible bio-inks with the required physicochemical and sensory attributes. Starch, as one of the important sources of dietary energy, is widely used in food processing and is considered as one kind of versatile polymers. It is not only because starch has low prices and abundant sources, but also because desirable modified starch can be obtained by altering its physicochemical properties through physical, chemical and enzymatic methods. This article focuses on the utilization of starch as materials to create food-grade bio-inks. Initially, several kinds of commonly used 3D printers are discussed. The factors affecting the printing quality of starch-based materials and improvement methods are then reviewed, as well as areas where future researches are required. The applications of 3D printed starch-based materials in food industry are also introduced. Overall, starch appears to be one kind of useful substances for creating edible bio-inks that can be utilized within 3D food printing applications to create a wide variety of food products.

Dual Modification of Starch by Physical Methods Based on Corona Electrical Discharge and Ionizing Radiation: Synergistic Impact on Rheological Behavior

The present paper focuses on evaluating the synergistic effects of dual modification with corona electric discharge (CED) and electron beam irradiation (EBI) on the rheological behavior of starch. Combined treatments were applied successively (CED/EBI and EBI/CED) and compared with single treatments. The outcomes showed that the rheological features of starch were altered by the dual modification in correlation with the irradiation dose mainly as a result of radiation-induced degradation. Decreases in apparent viscosity were described by exponential-like-models according to the order of application of the treatment sequences. The mathematical models allowed the estimation of the irradiation doses for which the viscosity decreased by e times for the dual modified starches (3.3 ± 1.3 kGy for CED/EBI and 5.6 ± 0.5 kGy for EBI/CED, respectively) and the fraction (f) of 0.47 ± 0.10 corresponding to starch granule considered to be affected by plasma. Both dual treatments yielded a synergistic effect, regardless of the order of application of the treatment sequences, being more effective in decreasing starch apparent viscosity than single EBI. However, synergism evaluation proved that the use of plasma as a pre-treatment to irradiation processing could provide benefits up to 20 kGy. These findings support the practical goals of technologists with valuable information that may facilitate or simplify the experimental design of starch dual modification with plasma and ionizing radiation.

Investigation of dual modification on physicochemical, morphological, thermal, pasting, and retrogradation characteristics of sago starch

The aim of this study was to evaluate the characteristics of dually modified sago starch by acid hydrolysis (AH)-hydroxypropylation (HP). For this purpose, sago starch was modified with the combination by AH (5-20 h hydrolysis times) followed by HP (5%-25% ratio of propylene oxide) processes. The results showed that the dual modification of the sago starch structure didn't have a significant effect on the size of starch granules, and the granule size was in the range of 0.005-0.151 µm; however, the pasting properties and the glass transition temperature decreased significantly (p < .05). Increasing the level of propylene oxide from 5% to 25% caused a significant increase in the substitution degree (DS) and swelling ability of starches and reduced the syneresis, while with increasing acid hydrolysis time from 5 h to 20 h, starch swelling decreased and syneresis increased (p < .05). AH process at high hydrolysis times (20 h) increased the gelatinization temperatures and decreased retrogradation temperatures. Increasing the level of propylene oxide in both single and dual modification reduced the temperatures and enthalpy of gelatinization and retrogradation of sago starch. In summary, dually modified sago starch has a great potential to use in specific food products such as frozen dough or frozen bakery products.

Impact of microwave irradiation on chemically modified talipot starches: A characterization study on heterogeneous dual modifications

In this study, the effect of chemical modifications such as oxidation, esterification and crosslinking was investigated alone and in combination with microwave irradiation on a non-conventional starch with 76% starch yield acquired from the trunk of matured talipot palm. The single- and dual-modifications imparted significant changes in the morphological, crystalline, pasting and rheological properties and digestibility of talipot starch. Characteristic peaks were observed in single- and dual-oxidized, esterified and crosslinked starches indicating their respective functional groups. All modifications significantly decreased (p ≤ 0.05) the relative crystallinity (RC) of talipot starches except for crosslinking, and the least RC (11.33%) was observed in microwave irradiated esterified starch. Microwave irradiation prior to chemical modifications showed a significant impact in the swelling and solubility of talipot starches. The decreased setback viscosity and increased light transmittance in single- and dual-microwave irradiated talipot starches showed their lowered retrogradation tendency, suitable for frozen foods. The resistant starch (RS) content was majorly improved in all heterogeneously dual modified talipot starches by incorporating more functional groups owed to structural and crystalline destruction in starch granules upon microwave irradiation. The highest RS content (45.02%) was observed in microwave irradiated esterified uncooked talipot starch.