Fluorescent and colorimetric dual-response sensor based on copper (II)-decorated graphitic carbon nitride nanosheets for detection of toxic organophosphorus

Developing a highly sensitive electrochemical sensor for malathion detection based on green g-C3N4@LiCoO2 nanocomposites

Nowadays, developing pesticide-free agriculture is highly demanded by society. The development of electrochemical sensors to monitor and control pesticides is an effective step toward this desired goal. The current research has faced this issue by modifying of glassy carbon electrodes (GCEs) with green g-C3N4@LiCoO2 nanocomposites to probe malathion, an organophosphate pesticide. The g-C3N4@LiCoO2 modified GCE showed higher current than the net GCE, as a result of improved electrocatalytic performance of the modified GCE to oxidize malathion. Increased malathion concentration enhanced the malathion oxidation anodic peak current at +410 mV caused by the g-C3N4@LiCoO2 modified GCE. The developed probe showed an excellent linear response for malathion detection in the 5-120 nM (R 2 = 0.994) range and recorded a limit of detection of 4.38 nM. Besides, the modified GCE reveals considerable stability and reproducibility, which offers a cost-effective, sensitive, and selective electrode for malathion probing.

Graphite Phase Carbon Nitride Nanosheets-Based Fluorescent Sensors for Analysis and Detection

Fluorescent sensors reflect information such as the concentration or content of the analysis by interacting with a specific recognition group to change the signal of the fluorophore. It has attracted much attention because of its advantages of high sensitivity, fast detection speed and low cost, and it has become an effective alternative to traditional detection methods. Graphitic phase carbon nitride nanosheets (g-CNNs) are a class of carbon-based fluorescent nanomaterials derived from bulk graphite phase carbon nitride (g-C3N4), which have attracted much attention from scholars because of their advantages of low cost, simple fabrication, high quantum yield, strong stability and nontoxicity. Functional modified g-CNNs can greatly improve the photocatalytic performance. At present, although there have been some researches on fluorescent sensors based on g-CNNs. Nevertheless, there are few reviews about the g-CNNs-based fluorescent sensors. Therefore, in addition to summarizing the sensing mechanism of fluorescent sensors (such as photoinduced electron transfer, fluorescence resonance energy transfer, and intramolecular charge transfer) and the advantages and disadvantages of common signal substances, this paper focused on the application progress of g-CNNs-based fluorescent sensors in the field of analysis and detection.

Superior oxidase-mimetic activity of FeCo-NC dual-atom nanozyme for smartphone-based visually colorimetric assay of organophosphorus pesticides

A colorimetric analysis platform has been successfully developed based on FeCo-NC dual-atom nanozyme (FeCo-NC DAzyme) for the detection of organophosphorus pesticides (OPPs). The FeCo-NC DAzyme exhibited exceptional oxidase-like activity (OXD), enabling the catalysis of colorless TMB to form blue oxidized TMB (oxTMB) without the need for H2O2 involvement. By combining acid phosphatase (ACP) hydrolase with FeCo-NC DAzyme, a "FeCo-NC DAzyme + TMB + ACP + SAP" colorimetric system was constructed, which facilitated the rapid detection of malathion. The chromogenic system was applied to detect malathion using a smartphone-based app and an auxiliary imaging interferogram device for colorimetric measurements, which have a linear range of 0.05-4.0 µM and a limit of detection (LOD) as low as 15 nM in real samples, comparable to UV-Vis and HPLC-DAD detection methods. Overall, these findings present a novel approach for convenient, rapid, and on-site monitoring of OPPs.

A Multi-Enzyme Cascade Response for the Colorimetric Recognition of Organophosphorus Pesticides Utilizing Core-Shell Pd@Pt Nanoparticles with High Peroxidase-like Activity

In modern agricultural practices, organophosphorus pesticides or insecticides (OPs) are regularly used to restrain pests. Their limits are closely monitored since their residual hinders the capability of acetylcholinesterase (AChE) and brings out a threatening accumulation of the neurotransmitter acetylcholine (ACh), which affects human well-being. Therefore, spotting OPs in food and the environment is compulsory to prevent human health. Several techniques are available to identify OPs but encounter shortcomings like time-consuming, operating costs, and slow results achievement, which calls for further solutions. Herein, we present a rapid colorimetric sensor for quantifying OPs in foods using TMB as a substrate, a multi-enzyme cascade system, and the synergistic property of core-shell Palladinum@Platinum (Pd@Pt) nanoparticles. The multi-enzyme cascade response framework is a straightforward and effective strategy for OPs recognition and can resolve the previously mentioned concerns. Numerous OPs, including Carbofuran, Malathion, Parathion, Phoxim, Rojor, and Phosmet, were successfully quantified at different concentrations. The cascade method established using Pd@Pt had a simple and easy operation, a lower detection limit range of (1-2.5 ng/mL), and a short detection time of about 50 min. With an R2 value of over 0.93, OPs showed a linear range of 10-200 ng/mL, portraying its achievement in quantifying pesticide residue. Lastly, the approach was utilized in food samples and recovered more than 80% of the residual OPs.

Target-Responsive Metal-Organic Framework Nanosystem with Synergetic Sensitive Detection and Controllable Degradation against the Pesticide Triazophos in Contaminated Samples for Environment Assessment and Food Safety

Developing sensitive practical sensors for monitoring pesticide residues in edible foods and environmental samples is vital for food safety and environmental protection. Enzyme-inhibited biosensors offer effective alternative sensing strategies by using the inherent characteristics of pesticides. To further improve the degradation function of pesticide sensors, here, a target-triggered porphyrin metal-organic framework (MOF)-based nanosystem was designed with the synergetic bifunction of sensitive detection and controllable degradation of the triazophos pesticide. As a result of triazophos-inhibited glutathione consumption, the MOF collapsed and released the ligand porphyrin, leading to the recovery of fluorescence and photosensitization of the free porphyrin. The fluorescence recovery resulted in a sensitive detection limit of 0.6 ng mL^-1 for triazophos, which was also applied for the determination of contaminated samples and bioaccumulation in rice. Furthermore, the target-activated photocatalytic ability of porphyrin endowed the system with the ability to effectively generate reactive oxygen species for degrading triazophos with a removal rate of ∼85%, achieving eco-friendly synergetic detection and photodegradation in a controllable way. Therefore, the intelligent multifunctional MOF system demonstrated the potential of programmable systems for jointly controllable tracking and elimination of pesticide residues in the environment and opened a new avenue for designing a precise mechanism for stimulus-triggered degradation of pesticide residues accompanied by sensitive detection for environmental friendliness and food safety.

Constructing defective-functionalized g-C3N4 homojunction for efficient photocatalytic detoxification of lemon yellow in an aqueous solution and beverage

The content of food colorant in food and environment should be limited to a safe range. Thus, cost-effective, and environmental-friendly detoxification technology is urgent for food safety and environmental protection. In this work, defective-functionalized g-C₃N₄ was successfully fabricated via intermediate engineering strategy. The prepared g-C₃N₄ possesses large specific surface area with abundant in-plane pores. Carbon vacancy and N-CO unit are introduced into g-C₃N₄ molecular framework, endowing the different degrees of n-type conductivity in varied domains. And then the n-n homojunction is generated. This homojunction structure is demonstrated to be efficient in separation and transfer of photoinduced charge carriers, and causes enhanced photocatalytic detoxification of lemon yellow under visible light. Furthermore, as-prepared g-C₃N₄ in lemon tea enable completely removed lemon yellow without obvious effect on its overall acceptability. The findings deepen the understanding on the defect-induced self-functionality of g-C₃N₄, and prove the application potential of photocatalytic technology in contaminated beverages.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

Ratiometric detection of polymyxin B based on the disaggregation of pyrenyl nanoassemblies in 100% aqueous media

Polymyxin B (PMB) was an antibiotic with highly effective antibacterial effect but narrow safety interval, and its residues in food had attracted widespread attention. It was important to develop an accurate method for the rapid detection of PMB in animal foods. In this work, we had established a ratiometric sensing system based on the formation of supramolecular assemblies of pyrenyl probes, which were driven by the synergy of noncovalent forces such as multiple-electrostatic and π-π stacking interactions. Compared with the traditional fluorescence detection based on the single wavelength change, the present approach showing two-wavelength fluorescence response could reduce the interference of other factors making the experimental results more accurate. The sensor exhibited high sensitivity and selectivity with a low detection limit (28.3 nM). This method could be used to realize visual detection and had a visual detection limit of 1 μM. As we had learned yet, this was the first ratiometric sensor for PMB detection in aqueous solution. We believed all our preliminary would not only provide a complementary strategy for the detection of PMB, but also develop some new ideas for the construction of sensors for rapid antibiotic detection.

Bio-inspired aptamers decorated gold nanoparticles enable visualized detection of malathion

Biosensors always respond to the targets of interest in a specific manner, employing biological or bio-mimic recognition elements such as antibodies and aptamers. Inspired by target recognition in nature, an aptamer-mediated, gold nanoparticle-based sensing approach is developed in this work for effective determination of malathion. The sensing system consists of negatively charged aptamer probes, and polycationic proteins, protamine, as well as exceptional colorimetric nanoprobes, barely gold nanoparticles (AuNPs). Protamine molecules bound to aptamer probes hinder the aggregation of AuNPs, while no such inhibition is maintained when aptamer-specific malathion is introduced into the solution, thus leading to the solution colour change from red to blue observable by the naked eye. The assay is accomplished via a mix-and-measure step within 40 min with a detection limit as low as 1.48 μg/L (3σ/s rule). The assay method also exhibits high selectivity and good applicability for the quantification of malathion in tap water with recovery rates of 98.9%-109.4%. Additionally, the good detection accuracy is also confirmed by the high-performance liquid chromatography method. Therefore, the non-enzymatic, label- and device-free characteristics make it a robust tool for malathion assay in agricultural, environmental, and medical fields.

Acidic pH and thiol-driven homogeneous cathodic electrochemiluminescence strategy for determining the residue of organophosphorus pesticide in Chinese cabbage

Electrochemiluminescent (ECL) sensors for organophosphorus pesticides (OPs) have received considerable attention, whereas complicated electrode's immobilization, response to single hydrolysate and anodic emission correlated with ECL assays restrict their potential utilization. Herein, we developed a homogeneous dual-response cathodic ECL system for highly sensitive and reliable analysis of OP using CdTe QDs as emitters. CdTe QDs, emitting red light, were fabricated through a hydrothermal reaction and generated anodic and cathodic ECL emission upon stimulation of tripropyl amine and K₂S₂O₈, respectively. Notably, CdTe QDs-K₂S₂O₈ showed a simultaneous response to thiol and acidic pH, and were regarded as a ECL sensor for methidathion with limit of detection of 0.016 ng/mL based on hydrolysis of acetylthiocholine into thiocholine and CH₃COOH by acetylcholinesterase (AChE) and OPs' inhibition on AChE activity. This sensor also exhibited good practicability to detect methidathion in Chinese cabbage. Overall, the sensor will supply more useful information for ensuring OPs-related food safety.

One-dimensional bimetallic PdRh alloy mesoporous nanotubes constructed for ultra-sensitive detection of carbamate pesticide

Bimetallic nanomaterials with various dimensions have been successfully explored in electrochemical biosensor to detect the carbamate pesticide. One-dimensional bimetallic nanomaterials with mesoporous, which possess bigger electrochemical active area, more catalytic active sites and faster electron transmission efficiency, may have excellent performance in electrochemical biosensor, but have been rarely reported. In order to confirm this hypothesis, one-dimensional PdRh alloy mesoporous nanotubes were prepared and applied as a platform for carbamate pesticide electrochemical detection. Upon optimum conditions, the constructed AChE sensor showed an ultrahigh sensitivity (0.279 μA/nM), a wide linear range (9.44 × 10^-8 - 0.944 mg/L) and a low detection limit (9.44 × 10^-8 mg/L) for carbaryl. And the biosensor exhibited outstanding anti-interference ability, precision and stability. Moreover, the actual sample detection of the biosensor has been demonstrated with a satisfactory recovery (94.01%-102.80%). The remarkable property may attribute to the integrated advantages of one-dimensional mesoporous structure and bimetallic alloy.

Progress in Nanomaterials-Based Enzyme and Aptamer Biosensor for the Detection of Organophosphorus Pesticides

With the improvement of people's safety awareness, the requirement of pesticide detection is gradually increasing, and many new detection methods toward Organophosphorus pesticide (OPs) has been further developed and applied. Nanomaterials-based biosensors have played an important role in the trace detection of OPs. This article mainly introduces the detection principle of enzymes and aptamers as the identification element of biosensors. Various nanomaterials (i.e., metals and metal oxides, carbon nanotubes, graphene and graphene oxide, quantum dots, metal organic frameworks, molecular imprinted polymers, etc.) possess their unique properties and play different roles in the enzyme and aptamer-based biosensors toward OPs: (a) to produce the optical or electrochemical signal; (b) as a carrier to load the enzyme or aptamer; (c) to enhance the signal response. Besides, the intelligent portable devices provide the possibility to realize the onsite and real-time detection. The limitations of some nanomaterials and the future development are discussed. Finally, the future of enzyme and aptamer-based biosensors has prospected.

The recent development of nanozymes for food quality and safety detection

As potential mimics of natural enzymes, nanozymes overcome many disadvantages of natural enzymes such as complex preparation and purification process, high price, poor stability and low recycling efficiency. Combined with...

Ultrasmall Au nanoparticles modified 2D metalloporphyrinic metal-organic framework nanosheets with high peroxidase-like activity for colorimetric detection of organophosphorus pesticides

Ultrasmall Au nanoparticles (UsAuNPs) in the size range of 4.0-7.0 nm was successfully immobilized on the surface of 2D metalloporphyrinic metal-organic framework nanosheets (2D MOF). Firstly, The obtained hybrid nanomaterial, UsAuNPs/2D MOF, was fully characterized by TEM, HRTEM, element mapping images and XPS. Then, the peroxidase-like activity of UsAuNPs/2D MOF was comparatively studied with other hybrid nanozyme to explore the influence of AuNPs size on peroxidase-like activity. Further, UsAuNPs/2D MOF with outstanding peroxidase-like activity was selected to form ternary cascade enzyme reaction with acetylcholinesterase (AChE) and choline oxidase (ChOx). Based on the inhibitory effect of organophosphorus pesticides on AChE, a fast and sensitive colorimetric method was established for trichlorfon detection with the advantages of simple operation, low detection limit (1.7 μM), good linear range (1.7-42.4 μM) and high accuracy (recovery rate of 96.6-105.3%). Finally, this method was applied to visual analysis of trichlorfon concentration in tomatoes, cucumbers and eggplants.

Nanozyme-Participated Biosensing of Pesticides and Cholinesterases: A Critical Review

To improve the output and quality of agricultural products, pesticides are globally utilized as an efficient tool to protect crops from insects. However, given that most pesticides used are difficult to decompose, they inevitably remain in agricultural products and are further enriched into food chains and ecosystems, posing great threats to human health and the environment. Thus, developing efficient methods and tools to monitor pesticide residues and related biomarkers (acetylcholinesterase and butylcholinesterase) became quite significant. With the advantages of excellent stability, tailorable catalytic performance, low cost, and easy mass production, nanomaterials with enzyme-like properties (nanozymes) are extensively utilized in fields ranging from biomedicine to environmental remediation. Especially, with the catalytic nature to offer amplified signals for highly sensitive detection, nanozymes were finding potential applications in the sensing of various analytes, including pesticides and their biomarkers. To highlight the progress in this field, here the sensing principles of pesticides and cholinesterases based on nanozyme catalysis are definitively summarized, and emerging detection methods and technologies with the participation of nanozymes are critically discussed. Importantly, typical examples are introduced to reveal the promising use of nanozymes. Also, some challenges in the field and future trends are proposed, with the hope of inspiring more efforts to advance nanozyme-involved sensors for pesticides and cholinesterases.

Highly sensitive fluorescent quantification of acid phosphatase activity and its inhibitor pesticide Dufulin by a functional metal-organic framework nanosensor for environment assessment and food safety

Developing a rapid and accurate strategy of sensing Dufulin is a vital challenge for risk assessment and food crops along with its spreading usage. Herein a dye-encapsulated azoterephthalate metal-organic framework (MOF)-based fluorescent sensing system was designed for Dufulin analysis by acid phosphatase (ACP) enzyme-controlled collapse of MOF framework and subsequent release of the encapsulated dye. The fluorescence intensity of the DMOF/AAP/ACP system was negatively related to the dosage of Dufulin (0-5 μg mL^-1) with detection limit of 2.96 ng mL^-1. The sensing system able to rapidly and sensitively sense the activity of ACP and Dufulin, and was also applicable for assessment of the real samples including paddy water and soil, polished rice and cucumber. Accordingly, this study illustrated the feasibility and the potential of MOF-derived nanosensors for improving pesticide analysis and opening up the design of the enzyme-based probes for pesticide sensing in environmental assessment and food safety.

Graphite Carbon Nitride and Its Composites for Medicine and Health Applications

With the progress of science and technology and the improvement of people's living standards, the performance of traditional materials can no longer fully meet the needs of social development. Graphitic phase carbon nitride (g-C₃ N₄ ), as a new type of nanomaterial, has good properties. Its unique graphite like structure and stable thermodynamic characteristics have led an increasing number of researchers to explore its diverse functions and use this as a basis to develop related energy and products for applications in various fields. Among them, applications in the field of medicine health have become popular in recent years. Therefore, this review summarizes the synthesis methods of g-C₃ N₄ and its composites, as well as their applications in food, medicine, environmental monitoring and disease treatment, in the hope of providing references and basis for further expanding the applications of g-C₃ N₄ in large health areas.

Highly Sensitive and Selective Detection Toward Melamine in Dairy Product by Turn-On Fluorescence of Ultrathin Graphitic Carbon Nitride Nanosheet

It is meaningful and promising to develop a practical sensor toward melamine in dairy products with high sensitivity and selectivity. However, complicated composition and environment in milk necessitate stable luminophore as sensor with excellent photophysical properties. Herein, ultrathin graphitic carbon nitride nanosheet (CNNS) is prepared via successive thermal polymerization and acid exfoliation. The photophysical property of CNNS states its strong ultraviolet absorption and intense blue-light emission. Noteworthily, the CNNS could act as a chemo-sensor to detect trace melamine in dairy products. The high stability, eminent sensitivity, powerful selectivity and competitiveness substantiates that this CNNS luminophore is a promising sensor for melamine in dairy products, being of potentially practical value on monitoring milk quality.