Effects of high hydrostatic pressure on the binding capacity, interaction, and antioxidant activity of the binding products of cyanidin-3-glucoside and blueberry pectin

Molecular interactions and binding mechanisms of the homogalacturonan and rhamnogalacturonan-I fractions of pectin and different anthocyanins

This study investigated the interactions between different structural regional fractions of pectin, specifically homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) fractions, and three anthocyanin monomers: cyanidin-3-O-glucoside (C3G), peonidin-3-O-glucoside (P3G), and pelargonidin-3-O-malonylglucoside (P3M). The binding ratios, physicochemical and structural characteristics of these pectin-anthocyanin complexes, and their binding mechanisms were analyzed. The HG fraction exhibited the highest binding ratio with C3G. Zeta potential and particle size analyses indicated that the HG fraction had a significantly higher negative charge compared to RG-І at pH 3.7, and the complexes exhibited an increase in particle size relative to the individual pectin fractions. Furthermore, data from 1H NMR and isothermal titration calorimetry (ITC) confirmed that hydrogen bonding, electrostatic interactions, and hydrophobic interactions primarily facilitated the binding interactions. In the binding interactions involving HG/RG-І and C3G/P3G, the Δδmax, binding constant, and Gibbs free energy (ΔG) of the HG fraction were greater than those of the RG-І fraction, while C3G exhibited stronger binding characteristics than P3G. However, the RG-І fraction demonstrated stronger binding to P3M than to HG. The interactions between pectin and anthocyanins are highly dependent on the structural characteristics of both components. These results offer further insights into the interactions between pectin fractions and anthocyanins at the molecular level.

High-pressure processing enhances konjac glucomannan/zeaxanthin complex interactions: Implications for colorful plant-based gels

This study investigates the effects of high-pressure processing (HPP) on the physicochemical and structural properties of konjac glucomannan (KGM)/zeaxanthin (ZEA) composite-colored gel. Gels treated with varying pressures and holding times were analyzed, with untreated samples serving as the control. The results indicate that HPP at 300 MPa for 15 min significantly improved pigment retention and water-holding capacity by 14.58 % and 1.02 %, respectively, while also enhancing gel hardness and chewiness. Structural analysis revealed that HPP increased enthalpy change (ΔH) and relative crystallinity by 44.83 % and 20.32 %, respectively, contributing to improved thermal stability. Spectroscopic analysis further confirmed that HPP strengthened hydrophobic and hydrogen bonding interactions within the complex, leading to the formation of a denser three-dimensional network structure. These findings highlight the potential of HPP as an effective approach to improve the stability and functionality of plant-based colored gels, providing valuable insights for the development of functional konjac gel products.

Interactions between polyphenols and polysaccharides/proteins: Mechanisms, effect factors, and physicochemical and functional properties: A review

Polyphenols have attracted much attention in the food industry and nutrition because of their unique biological activities. However, the health benefits of polyphenols are compromised due to their structural instability and sensitivity to the external environment. The interaction between polyphenols and polysaccharides/proteins largely determines the stability and functional characteristics of polyphenols in food processing and storage. Hence, this topic has attracted widespread attention in recent years. This review initially outlines the basic properties of polyphenols and their applications in food. Subsequently, the interaction mechanisms between polyphenols and polysaccharides/proteins are discussed in detail including non-covalent bonding, covalent modification, and conformational changes. These interactions can display profound impacts on the nutritional value, taste, stability, and safety of food. Additionally, this article also systematically reviews the influencing factors (type, concentration, temperature, pH, and other factors) of interaction between polyphenols and proteins/polysaccharides. Finally, this paper also summarizes systematically the effects of the interaction between polyphenols and polysaccharides/proteins on the physicochemical and functional properties of polyphenols/proteins. The findings provide prospects for the application of composite materials in food preservation, functional food development, and nanocarrier development, which can provide theoretical references for the in-depth development of polyphenols in the food industry.

Elevating anthocyanin extraction from mangosteen pericarp: A comparative exploration of conventional and emerging non-thermal technology

Mangosteen pericarp (MP) is abundant in bioactive compounds but is often discarded as waste, leading to environmental pollution. This study compared the extraction of dried MP using maceration and high-pressure processing (HPP). HPP at 10 min (500 MPa/20 °C) resulted in the highest ACNs, total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activities. It also significantly reduced residual enzyme activities (REA) of polyphenol oxidase (PPO) and peroxidase (POD) by 33.90 % and 8.27 %, respectively. Fourier-transform infrared spectroscopy (FT-IR) analysis revealed a new wavelength at 2665.25 cm-1, and scanning electron microscopy (SEM) showed significant pore formation in MP cells, indicating cell damage. HPP-10 min enhanced the extraction of bioactive compounds, which significantly elevated the thermal stability of ACNs at 60 °C. This suggests that HPP is a promising method for extracting and preserving ACNs and other bioactive compounds from dried MP, with potential applications as natural colorants.

The mechanism of pectin in improving anthocyanin stability and the application progress of their complexes: A review

Improving anthocyanin stability is a major challenge for the food industry. Studies have revealed that the interaction with pectin through non-covalent bonds can improve the anthocyanin stability, thus showing the potential to alleviate the above challenges. However, the interactions are highly complex and diverse. Thus, analyzing the effect of this interaction on anthocyanin stability is essential to promote anthocyanin-pectin complexes application in functional foods. Pectin can interact with anthocyanins through covalent and non-covalent interactions, and these interactions are affected by their structure, the external environment, and the processing methods. Through their interaction with pectin, the thermal, color, and storage stability of anthocyanins are improved, enhancing their bioavailability in the gastrointestinal and facilitating their application range in food processing. This review provides a theoretical reference for improving anthocyanin stability and increasing the application range of anthocyanin-pectin complexes.

Effect of high-pressure-homogenisation on the interaction between pomegranate peel pectin fractions and anthocyanins in acidic environment

In this study, changes in the basic composition and structural characterisation of water-soluble pectin (WSP), homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) from pomegranate peel were investigated after high-pressure-homogenisation (HPH) at 50 MPa and 300 MPa. The interactions between three pectin and anthocyanin (ACN) complex were also studied. The three pectin fractions were mainly composed of galacturonic acid (34.95%-87.69%), all with low degrees of methyl-esterification ≤41.20%. HPH at 300 MPa increased the binding ratios of ACN to three pectin fractions by 34.22%-34.59%. Changes in the structural characterisation results of pectin confirmed that the depolymerisation and breakdown of the side chains of pectin after HPH promoted electrostatic interactions, hydrogen bond and hydrophobic interaction between pectin and ACN. Correspondingly, the thermal and storage stabilities of ACN in the complex was boosted after HPH at 300 MPa. This study provides insights into the interaction between pectin and ACN under HPH.

Effect of H2O2/ascorbic acid degradation and gradient ethanol precipitation on the physicochemical properties and biological activities of pectin polysaccharides from Satsuma Mandarin

In this work, three degraded polysaccharides (DMPP-40, DMPP-60, DMPP-80) were successfully obtained by H2O2/ascorbic acid degradation and gradient ethanol precipitation from Satsuma mandarin peel pectin (MPP), and their physicochemical properties, antioxidant and prebiotic activities were investigated. The molecular weight of MPP, DMPP-40, DMPP-60, DMPP-80 were determined to be 336.83 ± 10.57, 18.93 ± 0.54, 26.07 ± 0.83 and 8.71 ± 0.27 kDa, respectively. The ethanol concentration significantly affected the physicochemical properties of DMPPs. DMPP-60 showed the highest yield (69.07 %) and uronic acid content (64.85 %), DMPP-80 showed the lowest molecular weight (8.71 kDa), and the composition and proportion of monosaccharides of DMPPs were significantly different. Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance spectroscopy (1H NMR) confirmed that DMPPs exhibited similar functional groups, while X-ray diffraction (XRD) indicated that DMPP-40 possessed some crystallographic sequences. Scanning electron microscopy (SEM) images directly verified the fragmented structure and reduced surface area of DMPPs. Besides, the H2O2/ascorbic acid treatment could obviously reduce the apparent viscosity and thermal stability of MPP. Meanwhile, the results of bioactivity assay showed that DMPPs possessed better antioxidant activity and probiotics pro-proliferative effects compared with MPP. DMPP-80 could significantly inhibit lipopolysaccharides (LPS)-stimulated production of inflammatory factors (including nitric oxide (NO), interleukin (IL)-6, tumor necrosis factor (TNF)-α and interleukin (IL)-1β) in RAW264.7 cells. Results suggest that the H2O2/ascorbic acid combined with gradient ethanol precipitation has potential applications in degradation and separation of MPP to improve its biological activities.

Stabilization effect and interaction mechanism of mannoprotein on anthocyanins in mulberry juice

This study aimed to investigate the problem of color instability in mulberry juice, examine the effect of mannoprotein (MP) dosage on improving the stability of anthocyanins in mulberry juice, and explore the molecular binding mechanism between them. As the mass ratio of anthocyanins to MP of 1.07 × 10-3: 1-1.65 × 10-3: 1, the retention rates of anthocyanins in mulberry juice and simulated system were significantly improved in the photostability experiment, with the highest increase of 128.89 % and 24.11 %, respectively. In the thermal stability experiment, it increased by 7.96 % and 18.49 %, respectively. The synergistic effect of combining MP with anthocyanins has been demonstrated to greatly enhance their antioxidant capacity, as measured by ABTS, FRAP, and potassium ferricyanide reduction method. Furthermore, MP stabilized more anthocyanins to reach the intestine in simulated in vitro digestion. MP and cyanidin-3-glucoside (C3G) interacted with each other through hydrogen bonding and hydrophobic interactions. Specific amino acid residues involved of MP in binding process were identified as threonine (THR), isoleucine (ILE) and arginine (ARG). The identification of the effective mass concentration ratio range and binding sites of MP and anthocyanins provided valuable insights for the application of MP in mulberry juice.

Combined transcriptome and widely targeted metabolome analysis reveals the potential mechanism of HupA biosynthesis and antioxidant activity in Huperzia serrata

Introduction

Huperzia serrata is a traditional Chinese herb that has gained much attention for its production of Huperzine A (HupA). HupA has shown promise on treating Alzheimer's disease (AD). However, the biosynthetic pathway and molecular mechanism of HupA in H. serrata are still not well understood.

Methods

Integrated transcriptome and metabolome analysis was performed to reveal the molecular mechanisms related to HupA biosynthesis and antioxidant activity in Huperzia serrata.

Results

HT (in vitro H. serrata thallus) exhibits higher antioxidant activity and lower cytotoxicity than WH (wild H. serrata). Through hierarchical clustering analysis and qRT-PCR verification, 7 important enzyme genes and 13 transcription factors (TFs) related to HupA biosynthesis were detected. Among them, the average |log2FC| value of CYP (Cytochrome P450) and CAO (Copper amine oxidase) was the largest. Metabolomic analysis identified 12 metabolites involved in the HupA biosynthesis and 29 metabolites related to antioxidant activity. KEGG co-enrichment analysis revealed that tropane, piperidine and pyridine alkaloid biosynthesis were involved in the HupA biosynthesis pathway. Furthermore, the phenylpropanoid, phenylalanine, and flavonoid biosynthesis pathway were found to regulate the antioxidant activity of H. serrata. The study also identified seven important genes related to the regulation of antioxidant activity, including PrAO (primary-amine oxidase). Based on the above joint analysis, the biosynthetic pathway of HupA and potential mechanisms of antioxidant in H. serrata was constructed.

Discussion

Through differential transcriptome and metabolome analysis, DEGs and DAMs involved in HupA biosynthesis and antioxidant-related were identified, and the potential metabolic pathway related to HupA biosynthesis and antioxidant in Huperzia serrata were constructed. This study would provide valuable insights into the HupA biosynthesis mechanism and the H. serrata thallus medicinal value.

Impact of thermal treatment on proanthocyanidin-pectin binary complexes: Insights from structural, rheological, antioxidant, and astringent properties

In this study, the effects of thermal treatments on the structural, rheological, water mobility, antioxidant, and astringency properties of proanthocyanidin (PA)-pectin binary complexes were investigated. Thermal treatments (25, 63, or 85 °C) significantly decreased the particle size but increased the molecular weight of PA-pectin complexes, which indicated that heating altered the intermolecular and intramolecular interactions between PA and pectin. The thermal treatments reduced the apparent viscosity of both pectin and PA-pectin complexes, but the presence of proanthocyanidins (PAs) increased the apparent viscosity and water mobility of the PA-pectin complexes. Antioxidant activity analysis showed that the presence of pectin slightly reduced the antioxidant activity of the PAs, but there were no significant changes in the total phenolic content and antioxidant activity after thermal treatment. Finally, we found that pectin reduced the astringency of the PAs by forming PA-pectin complexes. Moreover, the thermal treatments also significantly reduced the astringency of the PA-pectin complexes.

Unveiling the impact of high-pressure processing on anthocyanin-protein/polysaccharide interactions: A comprehensive review

Anthocyanins, natural plant pigments responsible for the vibrant hues in fruits, vegetables, and flowers, boast antioxidant properties with potential human health benefits. However, their susceptibility to degradation under conditions such as heat, light, and pH fluctuations necessitates strategies to safeguard their stability. Recent investigations have focused on exploring the interactions between anthocyanins and biomacromolecules, specifically proteins and polysaccharides, with the aim of enhancing their resilience. Notably, proteins like soy protein isolate and whey protein, alongside polysaccharides such as pectin, starch, and chitosan, have exhibited promising affinities with anthocyanins, thereby enhancing their stability and functional attributes. High-pressure processing (HPP), emerging as a non-thermal technology, has garnered attention for its potential to modulate these interactions. The application of high pressure can impact the structural features and stability of anthocyanin-protein/polysaccharide complexes, thereby altering their functionalities. However, caution must be exercised, as excessively high pressures may yield adverse effects. Consequently, while HPP holds promise in upholding anthocyanin stability, further exploration is warranted to elucidate its efficacy across diverse anthocyanin variants, macromolecular partners, pressure regimes, and their effects within real food matrices.

Physicochemical and antioxidant properties of pectin fractions extracted from lemon (Citrus Eureka) peels

Pectin, a natural polysaccharide, holds versatile applications in food and pharmaceuticals. However, there is a need for further exploration into extracting novel functional fractions and characterizing them thoroughly. In this study, a sequential extraction approach was used to obtain three distinct lemon pectin (LP) fractions from lemon peels (Citrus Eureka): LP extracted with sodium acetate (LP-SA), LP extracted with ethylenediaminetetraacetic acid (LP-EDTA), and LP extracted with sodium carbonate and sodium borohydride (LP-SS). Comprehensive analysis revealed low methyl-esterification in all fractions. LP-SA and LP-SS displayed characteristics of rhamnogalacturonan-I type pectin, while LP-EDTA mainly consisted of homogalacturonan pectin. Notably, LP-SA formed self-aggregated particles with rough surfaces, LP-EDTA showed interlocking linear structures with smooth planes, and LP-SS exhibited branch chain structures with smooth surfaces. Bioactivity analysis indicated that LP-SA had significant apparent viscosity and ABTS radical scavenging activity, while both LP-EDTA and LP-SS showed excellent thermal stability according to thermogravimetric analysis (TGA). Furthermore, LP-SS exhibited remarkable gel-forming ability and significant hydroxyl free radicals scavenging activity. In conclusion, this study presents a novel method for extracting various lemon pectin fractions with unique structural and bioactive properties, contributing insights for advanced applications in the food and pharmaceutical sectors.

Ultrasound assisted phytochemical extraction of red cabbage by using deep eutectic solvent: Modelling using ANFIS and optimization by genetic algorithms

The present investigation studied the effect of process parameters on the extraction of phytochemicals from red cabbage by the application of ultrasonication and temperature. The solvent selected for the study was deep eutectic solvent (DES) prepared by choline chloride and citric acid. The ultrasound assisted extraction process was modeled using adaptive neuro-fuzzy inference system (ANFIS) algorithm and integrated with the genetic algorithm for optimization purposes. The independent variables that influenced the responses (total phenolic content, antioxidant activity, total anthocyanin activity, and total flavonoid content) were ultrasonication power, temperature, molar ratio of DES, and water content of DES. Each ANFIS model was formed by the training of three Gaussian-type membership functions (MF) for each input, trained by a hybrid algorithm with 500 epochs and linear type MF for output MF. The ANFIS model predicted each response close to the experimental data which is evident by the statistical parameters (R2>0.953 and RMSE <1.165). The integrated hybrid ANFIS-GA algorithm predicted the optimized condition for the process parameters of ultrasound assisted extraction of phytochemicals from red cabbage was found to be 252.114 W for ultrasonication power, 52.715 °C of temperature, 2.0677:1 of molar ratio of DES and 25.947 % of water content in DES solvent with maximum extraction content of responses, with fitness value 3.352. The relative deviation between the experimental and ANFIS predicted values for total phenolic content, antioxidant activity, total anthocyanin activity, and total flavonoid content was found to be 1.849 %, 3.495 %, 2.801 %, and 4.661 % respectively.

Effect of ultrahigh pressure processing (UHP) on physicochemical properties, antioxidant activity and anti-inflammatory activity of insoluble dietary fiber from Pholiota nameko

The aim of this study was to evaluate the effect of ultrahigh pressure processing (UHP) of 200, 300, 400, 500, 600 and 700 MPa for 20, 40 and 30 min on physicochemical and bioactive properties of the insoluble dietary fiber Pholiota nameko (PN-IDF). The results revealed that UHP were capable of decreasing the particle size of PN-IDF and binding phenolic content. Moreover, UHP technique had an improving effect on the bioaccessible phenolic content, the water-holding capacity, the oil-holding capacity and the nitrite ion adsorption capacity. Further, UHP technique presented a promoting effect on the antioxidant activity by scavenging ABTS or DPPH free radicals and increasing reducing power, and the anti-inflammatory activity by inhibiting carrageenan-induced paw edema on PN-IDF. Overall, this study well proved that UHP technology could improve the physicochemical and functional quality of PN-IDF, which could be used as a promising green technique for functional food ingredients processing.

Non-thermal treatments of strawberry pulp: The relationship between quality attributes and microstructure

The relationship between quality attributes and microstructure in strawberry pulp after pasteurization (PS), ultrasound (US), electron beam irradiation (EB), and high pressure (HP) treatments was investigated. The results showed that US treatment decreased the viscosity to the lowest by 80.15% and increased the a* value, cloudy stability, and contents of titratable acid, total soluble solid, organic acids, total phenols, total flavonoids, and total anthocyanins (TAC), as well as its antioxidant capacity, due to the decrease in particle size, the destruction of microstructure, and the release of intracellular compounds. US and EB treatments could maintain the volatile compounds. The greatest deterioration in TAC and volatile compound content was found in the pulp treated with PS and HP treatments. HP treatment was beneficial to the enhancement of apparent viscosity, organic acids, and soluble sugar. These results provided insights into the enhancement of quality attributes in strawberry pulp due to the microstructure change.

Characterize the physicochemical properties and microstructure of pectin from high-pressure and thermal processed cloudy hawthorn (Crataegus pinnatifida) juice based on acid heating extraction

Physicochemical properties and morphological features of pectin in high-pressure-processing (JHPP) and thermal-processing (JTP) treated cloudy hawthorn juice were investigated based on acid heating extraction. Pectin from hawthorn juice was identified as low methoxy pectin (41.77%), which was significantly reduced to 34.56%-39.51% from JHPP, while pectin esterification degree (DE) from JTP increased to 45.58%, which can also be confirmed by Fourier transform infrared spectroscopy. In comparison to control, pectin linearity of JHPP and JTP significantly decreased with more highly branched-chains. However, no significate difference was observed in thermostability, crystallinity and main functional groups. Interestingly, a large number of aggregations was observed in JHPP pectin, and the intermodular distance of JTP pectin was enhanced, which was consistent with the results of viscosity, molecular weight and DE. These findings provided insights into utilization of hawthorn pectin and application of high-pressure processing (HPP) for improving quality property of fruit products by pectin modification.

Nanoencapsulation of Cyanidin 3-O-Glucoside: Purpose, Technique, Bioavailability, and Stability

The current growing attractiveness of natural dyes around the world is a consequence of the increasing rejection of synthetic dyes whose use is increasingly criticized. The great interest in natural pigments from herbal origin such as cyanidin 3-O-glucoside (C3G) is due to their biological properties and their health benefits. However, the chemical instability of C3G during processing and storage and its low bioavailability limits its food application. Nanoencapsulation technology using appropriate nanocarriers is revolutionizing the use of anthocyanin, including C3G. Owing to the chemical stability and functional benefits that this new nanotechnology provides to the latter, its industrial application is now extending to the pharmaceutical and cosmetic fields. This review focuses on the various nanoencapsulation techniques used and the chemical and biological benefits induced to C3G.

Inhibition effect of high hydrostatic pressure combined with epigallocatechin gallate treatments on pectin methylesterase in orange juice and model system

High hydrostatic pressure (HHP) is currently the most successful non-thermal processing technology for commercial applications, but with a drawback that it is difficult to effectively inactivate the pectin methylesterase (PME), which is critical to the stability of orange juice. In this study, the PME inhibition and mechanism by HHP (600 MPa/10 min) combined with epigallocatechin gallate (HHP-EGCG) treatment were investigated. Firstly, the HHP-EGCG treatment showed enhancement effect on PME inhibition in orange juice, and the samples maintained higher content of water soluble pectin and exhibited higher suspension stability than the HHP treated samples during 13 days of refrigerated storage. Secondly, after HHP-EGCG treatment, further synergistic effect was observed in the phosphate buffer system, and the greatest secondary structure transformation and fluorescence quenching of PME occurred. Finally, molecule docking suggested that EGCG could interact with the active sites of PME, and transmission electron microscope results revealed further aggregation of PME under HHP-EGCG treatment.

Dietary Intervention with Blackcurrant Pomace Protects Rats from Testicular Oxidative Stress Induced by Exposition to Biodiesel Exhaust

The exposure to diesel exhaust emissions (DEE) contributes to negative health outcomes and premature mortality. At the same time, the health effects of the exposure to biodiesel exhaust emission are still in scientific debate. The aim of presented study was to investigate in an animal study the effects of exposure to DEE from two types of biodiesel fuels, 1st generation B7 biodiesel containing 7% of fatty acid methyl esters (FAME) or 2nd generation biodiesel (SHB20) containing 7% of FAME and 13% of hydrotreated vegetable oil (HVO), on the oxidative stress in testes and possible protective effects of dietary intervention with blackcurrant pomace (BC). Adult Fisher344/DuCrl rats were exposed by inhalation (6 h/day, 5 days/week for 4 weeks) to 2% of DEE from B7 or SHB20 fuel mixed with air. The animals from B7 (n = 14) and SHB20 (n = 14) groups subjected to filtered by a diesel particulate filter (DPF) or unfiltered DEE were maintained on standard feed. The rats from B7+BC (n = 12) or SHB20+BC (n = 12), exposed to DEE in the same way, were fed with feed supplemented containing 2% (m/m) of BC. The exposure to exhaust emissions from 1st and 2nd generation biodiesel resulted in induction of oxidative stress in the testes. Higher concentration of the oxidative stress markers thiobarbituric acid-reactive substances (TBARS), lipid hydroperoxides (LOOHs), 25-dihydroxycholesterols (25(OH)2Ch), and 7-ketocholesterol (7-KCh) level), as well as decreased level of antioxidant defense systems such as reduced glutathione (GSH), GSH/GSSG ratio, and increased level of oxidized glutathione (GSSG)) were found. Dietary intervention reduced the concentration of TBARS, 7-KCh, LOOHs, and the GSSG level, and elevated the GSH level in testes. In conclusion, DEE-induced oxidative stress in the testes was related to the biodiesel feedstock and the application of DPF. The SHB20 DEE without DPF technology exerted the most pronounced toxic effects. Dietary intervention with BC in rats exposed to DEE reduced oxidative stress in testes and improved antioxidative defense parameters, however the redox balance in the testes was not completely restored.

Beneficial effects of high pressure processing on the interaction between RG-I pectin and cyanidin-3-glucoside

In the present study, the effects of high-pressure processing (HPP) on the binding capacity, structural properties, antioxidant capacity and stability of rhamngalacturonan I (RG-I) pectin and cyanidin-3-glucoside (C3G) were investigated. HPP was found to have a positive effect on the binding between the two molecules, and the binding rate was increased by 32.8% after treatment (500 MPa/15 min). The increase in the binding rate is mainly due to the influence of high pressure on noncovalent effects such as hydrogen bonding and hydrophobicity. The results indicate that high pressure can be used to maintain the antioxidant capacity of C3G and improve the stability of C3G. The C3G retention rate is increased by 34.0% and 38.3% after heat treatment and simulated digestion, respectively. The results indicate that HPP improved stability of the C3G-RG-I pectin complex through interaction between C3G and RG-I pectin.

TMT-Based Quantitative Proteomics Analyses Reveal the Antibacterial Mechanisms of Anthocyanins from Aronia melanocarpa against Escherichia coli O157:H7

Aronia melanocarpa anthocyanins (AMAs), as natural plant extracts, can control pathogens and are attracting increasing attention. In this study, a tandem mass tag (TMT) quantitative proteomics method combined with multiple reaction monitoring (MRM) was used to explore the antibacterial mechanism of AMAs against Escherichia coli at the protein level. The results showed that 1739 proteins were identified in E. coli treated with AMAs, of which 628 were altered, including 262 downregulated proteins and 366 upregulated proteins. Bioinformatics analysis showed that these differentially expressed proteins have different molecular functions and participate in different molecular pathways. AMAs can affect E. coli protein biosynthesis, DNA replication and repair, oxidative stress response, peptidoglycan biosynthesis, and homeostasis. These pathways induce morphological changes and cell death. The results of this study help understand the molecular mechanism of the inhibitory effect of AMAs on food-borne pathogens and provide a reference for further development of plant-derived antimicrobial agents.

New valorization approach of Algerian dates (Phoenix dactylifera L.) by ultrasound pectin extraction: Physicochemical, techno-functional, antioxidant and antidiabetic properties

To exploit the great fortune of date fruits, the current study aimed to valorize an Algerian common variety by extracting pectins. Response surface methodology (RSM) was applied as process optimization tool to achieve the highest yield using ultrasound-assisted extraction (UAE) as compared to conventional acid extraction (CAE). The experimental yield value (6.7%) was well matched with the predicted one (6.6%) at the optimum conditions (60 °C, 90 min, pH 1.5), confirming the validity of the model. The evaluation of the monomeric composition showed higher content of galacturonic acid and lower of neutral sugars in UAE pectin, as compared to CAE pectin. Conventional treatments decreased the molecular weight (Mw) of the extracted pectins (539 kDa) in a higher extent than ultrasound treatment (800 kDa). Fourier-Transform Infrared Spectroscopy (FT-IR) spectral analysis showed that both samples were low-methoxyl pectins. CAE gave rise to pectins with slightly upper technological samples in terms of water and oil holding capacity (5.2 and 3.8 g/g, respectively), and emulsifying activity (38.5 m²/g). Moreover, date pectins obtained by UAE presented enhanced antioxidant activity (24.3 and 61.0 mg/g DW for DPPH and FRAP assays, respectively), and in vitro antidiabetic properties, showing higher glucose adsorption capacity (4 mmol g^-1 at 200 min), as well as α-amylase inhibition (73.7%) and potential capacity to decrease glucose diffusion (1.4 mmol mM g^-1 at 150 min), which could improve the ability to retard starch digestion (0.1 mmol mM g-1 at 150 min), providing potential health-promoting properties.

Anti-inflammatory and intestinal microbiota modulation properties of high hydrostatic pressure treated cyanidin-3-glucoside and blueberry pectin complexes on dextran sodium sulfate-induced ulcerative colitis mice

This study investigated the anti-inflammatory effects of cyanidin-3-glucoside (C3G) and blueberry pectin (BP) complexes on mice with dextran sodium sulfate (DSS)-induced colitis before and after high hydrostatic pressure (HHP) treatment. Real-time polymerase chain reaction (RT-PCR), western blotting, and 16S rDNA sequencing were used to study the expression of inflammation-related factors, activation of signal pathway-related proteins, and changes in the intestinal flora in ulcerative colitis (UC) mice. The results showed that HHP-treated C3G-BP complexes significantly relieved diarrhea and blood loss in the stool of UC mice and alleviated colon shortening. The potential mechanism of action involved reduction in intestinal oxidative stress mRNA expression of pro-inflammatory factors, improvement in anti-inflammatory factor levels, inhibition of the NF-κB signaling pathway, increased protein levels of Bcl-2/Bax and caspase-3/cleaved caspase-3 genes, and improved gut microbiota composition. Compared with other experimental groups, the HHP-treated C3G-BP complexes group exhibited the best anti-inflammatory effect on DSS-induced UC mice. The results may provide new ideas for using C3G-BP complexes for treating UC and help develop better processing methods.

Food-derived cyanidin-3-O-glucoside reverses microplastic toxicity via promoting discharge and modulating the gut microbiota in mice

Microplastics (MPs) ingested and accumulated by organisms would ultimately pose a threat to humans via the food chain. A balanced gut microbiota contributes to many health benefits, which is readily influenced by environmental chemicals such as MPs. Cyanidin-3-O-glucoside (C3G), a bioactive compound of the anthocyanin family, possesses a variety of functional effects including anti-oxidant and anti-inflammatory, as well as gut microbiota modulation. C3G has been demonstrated to prevent polystyrene (PS) induced toxicities in Caco-2 cells and Caenorhabditis elegans (C. elegans) via activating autophagy and promoting discharge. In the present study, we aimed to explore the alleviation effect of C3G on PS induced toxicities in C57BL/6 mice. Our results showed that the supplementation of C3G effectively reduced the tissue accumulation and promoted the fecal PS discharge, leading to alleviation of the PS-caused oxidative stress and inflammatory response. Meanwhile, C3G modulated PS-associated gut microbiome perturbations and regulated functional bacteria in inflammation such as Desulfovibrio, Helicobacter, Oscillospiraceae and Lachnoclostridium. Also, C3G administration initiated alterations in functional pathways in response to xenobiotic PS, and reduced bacterial functional genes related to inflammation and human diseases. These findings may offer evidence for the protective role of C3G in the intervention of PS-induced toxicity and gut dysbiosis.

Potential micro-/nano-encapsulation systems for improving stability and bioavailability of anthocyanins: An updated review

Anthocyanins (ACNs) are notable hydrophilic compounds that belong to the flavonoid family, which are available in plants. They have excellent antioxidants, anti-obesity, anti-diabetic, anti-inflammatory, anticancer activity, and so on. Furthermore, ACNs can be used as a natural dye in the food industry (food colorant). On the other hand, the stability of ACNs can be affected by processing and storage conditions, for example, pH, temperature, light, oxygen, enzymes, and so on. These factors further reduce the bioavailability (BA) and biological efficacy of ACNs, as well as limit ACNs application in both food and pharmaceutics field. The stability and BA of ACNs can be improved via loading them in encapsulation systems including nanoemulsions, liposomes, niosomes, biopolymer-based nanoparticles, nanogel, complex coacervates, and tocosomes. Among all systems, biopolymer-based nanoparticles, nanohydrogels, and complex coacervates are comparatively suitable for improving the stability and BA of ACNs. These three systems have excellent functional properties such as high encapsulation efficiency and well-stable against unfavorable conditions. Furthermore, these carrier systems can be used for coating of other encapsulation systems (such as liposome). Additionally, tocosomes are a new system that can be used for encapsulating ACNs. ACNs-loaded encapsulation systems can improve the stability and BA of ACNs. However, further studies regarding stability, BA, and in vivo work of ACNs-loaded micro/nano-encapsulation systems could shed a light to evaluate the therapeutic efficacy including physicochemical stability, target mechanisms, cellular internalization, and release kinetics.

High Hydrostatic Pressure Treatment of Oysters (Crassostrea gigas)-Impact on Physicochemical Properties, Texture Parameters, and Volatile Flavor Compounds

High hydrostatic pressure (HHP) treatment is a non-thermal processing technology, which is widely used in the food processing field at present. In this study, the effects of HHP treatment (100~500 MPa for 5 min) on the physicochemical properties, texture parameters, and volatile flavor compounds of oysters were investigated. The results showed that HHP treatment increased the water content while reducing the crude protein and ash content of the oyster. Texture parameters showed that HHP treatment improved the hardness, springiness, chewiness, and cohesiveness of oysters, compared with the control group. In addition, the saturated fatty acid (SFA) content was slightly increased after HHP treatment, while the difference in monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) content was not significant. Furthermore, HHP increased hexenoic aldehyde, 2,4-heptadienal, 1-octene-3-ol, and 2-octen-1-ol and decreased the contents of 3. 6-nadien-1-ol, 3-octanone, and 2-undecanone, suggesting that HHP might inhibit the fishiness of oyster and showed a positive effect on its flavor. Based on the above results, HHP improved the edible qualities such as texture properties and volatile flavor of oysters. This meets the requirements of consumers on the edible quality of seafood and provides new ideas for the development of seafood.