Casein phosphopeptide-calcium chelate: Preparation, calcium holding capacity and simulated digestion in vitro

Novel microbial fermentation for the preparation of iron-chelating scallop skirts peptides-its profile, identification, and possible binding mode

Iron chelating peptides have been widely utilized as iron supplements due to their excellent absorption capacity, However, the high cost and cumbersome manufacturing process of these peptides significantly limit their industrial application. In this study, fermentation was used for the first time to prepare iron chelating peptides. Bacillus altitudinis 3*1-3 was selected as the most suitable strain from 50 strains. The hydrolysates of fermented scallop skirts showed excellent iron-chelating capacity (9.39 mg/g). Aspartic acid, glutamic acid, and histidine are crucial for the binding of peptides to ferrous ions. The heptapeptide (FEDPEFE) forms six binding bonds with ferrous irons. Compared with ferrous sulfate, peptide-ferrous chelate showed more stability in salt solution and simulated gastrointestinal juice (p < 0.05). Furthermore, the fermentation method could save >50% of the cost compared with the enzymatic method. The results can provide a theoretical basis for the preparation of ferrous-chelated peptides using the fermentation method.

Characteristics of casein phosphopeptides in Chinese human milk and its correlation with infant growth: A cross-sectional study

This research aimed to investigate the characteristics of casein phosphopeptides in Chinese human milk, and their potential relationship to infant growth. Using the liquid chromatography-Orbitrap-mass spectrometry technique, a total of 15 casein phosphopeptides were identified from 200 human milk samples. Also, our results indicate that casein phosphopeptides were phosphorylated with only one phosphate. The relative concentrations of casein phosphopeptides at 6 months postpartum were increased compared with milk at 2 months (FDR < 0.05). Significantly positive correlations were observed between casein phosphopeptides and infant growth, as shown by four casein phosphopeptides were positively correlated with the infants' weight-for-age Z-scores (rs range from 0.20 to 0.29), and three casein phosphopeptides were positively correlated with the infants' length-for-age Z-scores (rs range from 0.19 to 0.27). This study is the first to reveal the phosphorylated level and composition of casein phosphopeptides in Chinese human milk, and their potential relationship with infant growth.

Recent progress in the preparation of bioactive peptides using simulated gastrointestinal digestion processes

Bioactive peptides (BAPs) represent a unique class of peptides known for their extensive physiological functions and their role in enhancing human health. In recent decades, owing to their notable biological attributes such as antioxidant, antihypertensive, antidiabetic, and anti-inflammatory activities, BAPs have received considerable attention. Simulated gastrointestinal digestion (SGD) is a technique designed to mimic physiological conditions by adjusting factors such as digestive enzymes and their concentrations, pH levels, digestion duration, and salt content. Initially established for analyzing the gastrointestinal processing of foods or their constituents, SGD has recently become a preferred method for generating BAPs. The BAPs produced via SGD often exhibit superior biological activity and stability compared with those of BAPs prepared via other methods. This review offers a comprehensive examination of the recent advancements in BAP production from foods via SGD, addressing the challenges of the method and outlining prospective directions for further investigation.

Glycated Walnut Meal Peptide-Calcium Chelates: Preparation, Characterization, and Stability

Finding stable and bioavailable calcium supplements is crucial for addressing calcium deficiency. In this study, glycated peptide-calcium chelates (WMPHs-COS-Ca) were prepared from walnut meal protein hydrolysates (WMPHs) and chitosan oligosaccharides (COSs) through the Maillard reaction, and the structural properties and stability of the WMPHs-COS-Ca were characterized. The results showed that WMPHs and COSs exhibited high binding affinities, with a glycation degree of 64.82%. After glycation, Asp, Lys, and Arg decreased by 2.07%, 0.46%, and 1.06%, respectively, which indicated that these three amino acids are involved in the Maillard reaction. In addition, compared with the WMPHs, the emulsifying ability and emulsion stability of the WMPHs-COS increased by 10.16 mg2/g and 52.73 min, respectively, suggesting that WMPHs-COS have better processing characteristics. After chelation with calcium ions, the calcium chelation rate of peptides with molecular weights less than 1 kDa was the highest (64.88%), and the optimized preparation conditions were 5:1 w/w for WMPH-COS/CaCl2s, with a temperature of 50 °C, a chelation time of 50 min, and a pH of 7.0. Scanning electron microscopy showed that the "bridging role" of WMPHs-COS changed to a loose structure. UV-vis spectroscopy and Fourier transform infrared spectrometry results indicated that the amino nitrogen atoms, carboxyl oxygen atoms, and carbon oxygen atoms in WMPHs-COS chelated with calcium ions, forming WMPHs-COS-Ca. Moreover, WMPHs-COS-Ca was relatively stable at high temperatures and under acidic and alkaline environmental and digestion conditions in the gastrointestinal tract, indicating that WMPHs-COS-Ca have a greater degree of bioavailability.

Effect of clove essential oil nanoemulsion on physicochemical and antioxidant properties of chitosan film

This study evaluated the physicochemical and antioxidant properties of clove essential oil (0, 0.2, 0.4, 0.6, 0.8, 1.0 % v/v) nanoemulsion (CEON) loaded chitosan-based films. With the increasing concentrations of the CEON, the thickness, b* and ΔE values of the films increased significantly (P < 0.05), while L* and light transmission dropped noticeably (P < 0.05). The hydrogen bonds formed between the CEON and chitosan could be demonstrated through Fourier-transform infrared spectra, indicating their good compatibility and intermolecular interactions. Furthermore, the added CEON considerably reduced the crystallinity and resulted in a porous structure of the films, as observed through X-ray diffraction plots and scanning electron microscopy images, respectively. This eventually led to a drop in both tensile strength and moisture content of the films. Moreover, the antioxidant properties were significantly enhanced (P < 0.05) with the increase in the amount of clove essential oil (CEO) due to the encapsulation of CEO by the nanoemulsion. Films containing 0.6 % CEO had higher elongation at break, higher water contact angle, lower water solubility, lower water vapor permeability, and lower oxygen permeability than the other films; therefore, such films are promising for application in meat preservation.

Preparation, characterization, and bioavailability evaluation of antioxidant phosvitin peptide-ferrous complex

BACKGROUND

Iron deficiency anemia (IDA) is one of the commonest global nutritional deficiency diseases, and the low bioavailability of iron is a key contributing factor. The peptide-iron complex could be used as a novel iron supplement to improve iron bioavailability.

RESULTS

In this study, antioxidant low molecular weight (<3 kDa) phosvitin peptide (named PP-4) was separated to prepare a phosvitin peptide-ferrous complex (named PP-4-Fe); then the structural conformation of PP-4-Fe was characterized and its bioavailability by in vitro digestion was evaluated. The results showed that PP-4 had good ferrous-binding activity with 96.14 ± 2.86 μg Fe2+ mg-1 , and had a strong antioxidant effect with 995.61 ± 79.75 μmol TE mg-1 in 2,2'-azinobis'3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 62.3 ± 3.95 μmol FeSO4 mg-1 in ferric ion reducing antioxidant power (FRAP). After ferrous binding, the FRAP activity of PP-4-Fe, enhanced by 1.8 times, formed a more ordered structure with an increase in α-helix and decrease in γ-random coil. The ferrous binding sites of PP-4 involved were the amino, carboxyl, imidazole, and phosphate groups. The PP-4-Fe complex displayed excellent gastrointestinal stability and antioxidant effects during digestion. The iron dialysis percentage of PP-4-Fe was 74.59% ± 0.68%, and increased to 81.10% ± 0.89% with the addition of 0.25 times vitamin C (VC). This indicated that PP-4-Fe displayed excellent bioavailability and VC in sufficient quantities had a synergistic effect on improving bioavailability.

CONCLUSIONS

This study demonstrated that antioxidant phosvitin peptide was an efficient delivery system to protect ferrous ions and suggested that the phosvitin peptide-ferrous complex has strong potential as a ferrous supplement. © 2023 Society of Chemical Industry.

Identification of calcium chelating peptides from peanut protein hydrolysate and absorption activity of peptide-calcium complex

BACKGROUND

Peanut peptides have good chelating ability with metal ions. However, there are few studies on the chelation mechanism of peanut peptides with calcium and absorption properties of peptide-calcium complex.

RESULTS

Peptides with high calcium chelating rate were isolated and purified from peanut protein hydrolysate (PPH), and the chelation rate of component F21 was higher (81.4 ± 0.8%). Six peptides were identified from component F21 by liquid chromatography-tandem mass spectrometry, and the frequency of acidic amino acids and arginine in the amino acid sequence was higher in all six peptides. Peanut peptide-calcium complex (PPH21-Ca) was prepared by selecting component F21 (PPH21). Ultraviolet analysis indicated that the chelate reaction occurred between peanut peptide and calcium ions. Fourier transform infrared analysis showed that the chelating sites were carboxyl and amino groups on the amino acid residues of peptides. Scanning electron microscopy revealed that the surface of peanut peptide had a smooth block structure, but the surface of the complex had a granular morphology. Caco-2 cell model tests revealed that the bioavailability of PPH21-Ca was 58.4 ± 0.5%, which was significantly higher than that of inorganic calcium at 37.0 ± 0.4%.

CONCLUSION

Peanut peptides can chelate calcium ions by carboxyl and amino groups, and the peptide-calcium complex had higher bioavailability. This study provides a theoretical basis for the development of new calcium supplement products that are absorbed easily. © 2024 Society of Chemical Industry.

Structural characterization and calcium absorption-promoting effect of sucrose-calcium chelate in Caco-2 monolayer cells and mice

Sucrose emerges as a chelating agent to form a stable sucrose-metal-ion chelate that can potentially improve metal-ion absorption. This study aimed to analyze the structure of sucrose-calcium chelate and its potential to promote calcium absorption in both Caco-2 monolayer cells and mice. The characterization results showed that calcium ions mainly chelated with hydroxyl groups in sucrose to produce sucrose-calcium chelate, altering the crystal structure of sucrose (forming polymer particles) and improving its thermal stability. Sucrose-calcium chelate dose dependently increased the amount of calcium uptake, retention, and transport in the Caco-2 monolayer cell model. Compared to CaCl2 , there was a significant improvement in the proportion of absorbed calcium utilized for transport but not retention (93.13 ± 1.75% vs. 67.67 ± 7.55%). Further treatment of calcium channel inhibitors demonstrated the active transport of sucrose-calcium chelate through Cav1.3. Cellular thermal shift assay and quantitative reverse transcription-polymerase chain reaction (qRT-PCR) assays indicated that the ability of sucrose-calcium chelate to promote calcium transport was attributed to its superior ability to bind with PMCA1b, a calcium transporter located on the basement membrane, and stimulate its gene expression compared to CaCl2 . Pharmacokinetic analysis of mice confirmed the calcium absorption-promoting effect of sucrose-calcium chelate, as evident by the higher serum calcium level (44.12 ± 1.90 mg/L vs. 37.42 ± 1.88 mmol/L) and intestinal PMCA1b gene expression than CaCl2 . These findings offer a new understanding of how sucrose-calcium chelate enhances intestinal calcium absorption and could be used as an ingredient in functional foods to treat calcium deficiency. PRACTICAL APPLICATION: The development of high-quality calcium supplements is crucial for addressing the various adverse symptoms associated with calcium deficiency. This study aimed to prepare a sucrose-calcium chelate and analyze its structure, as well as its potential to enhance calcium absorption in Caco-2 monolayer cells and mice. The results demonstrated that the sucrose-calcium chelate effectively promoted calcium absorption. Notably, its ability to enhance calcium transport was linked to its strong binding with PMCA1b, a calcium transporter located on the basement membrane, and its capacity to stimulate PMCA1b gene expression. These findings contribute to a deeper understanding of how the sucrose-calcium chelate enhances intestinal calcium absorption and suggest its potential use as an ingredient in functional foods for treating calcium deficiency.

Effect of the phosphorylation structure in casein phosphopeptides on the proliferation, differentiation, and mineralization of osteoblasts and its mechanism

Our previous studies have shown that highly phosphorylated casein phosphopeptides (residues 1-25) P5 could efficiently bind calcium and promote intestinal calcium absorption, and enhanced bone development in rats. The purpose of this study was to investigate the effect of the phosphorylation structure in P5 on the proliferation, differentiation, and mineralization of osteoblasts (MC3T3-E1) and its mechanism. P5 was obtained by high-performance liquid chromatography (HPLC) and non-phosphorylated peptide P5-0 was obtained by chemical synthesis. Compared with the control group, the proliferation rate of MC3T3-E1 cells treated by P5 was 1.10 times that of P5-0 at 200 μg mL-1. P5 caused the cell cycle retention of MC3T3-E1 cells in the G2/M phase, while P5-0 had no significant difference in the G2/M phase. MC3T3-E1 cells incubated with P5 showed stronger alkaline phosphatase (ALP) activity than with P5-0, suggesting a tendency to promote cellular differentiation. Compared to the P5-0 treatment group, the P5 treatment group at concentrations of 10 μg mL-1 showed significant differences in the mineralization rates (p < 0.05). P5 significantly upregulated the expressions of Runx2, ALP, ColIα1, and OCN compared with the control group (p < 0.05). In addition, in silico molecular docking showed that the binding force of the P5-EGFR complex was stronger than that of the P5-0-EGFR complex, which was significantly related to the phosphorylation structure in P5 and might be an important reason for osteoblast proliferation. In conclusion, the phosphorylation structure and amino acid composition in P5 stimulated the osteogenic activity of MC3T3-E1 cells, and could be expected to be a functional food for the prevention of osteoporosis.

Effects of casein phosphopeptides on thermal stability and sensory quality of whey protein emulsions containing calcium beta-hydroxy-beta-methylbutyrate

This study aimed to elucidate the effect of casein phosphopeptides (CPP) on the thermal stability and sensory quality of whey protein emulsions containing calcium beta-hydroxy-beta-methylbutyrate (WPEs-HMB-Ca). The interaction mechanism among CPP, HMBCa, and WP in the emulsions before and after autoclaving (121 °C, 15 min) was systematically investigated from macroscopic external and microscopic molecular perspectives. It was found that WPEs-HMB-Ca treated by autoclaving resulted in an increase in droplet size (d_4,3 = 24.09 μm) due to aggregation/flocculation of proteins, along with a stronger odor with higher viscosity, compared to those without autoclaving. When CPP:HMB-Ca = 1:25 (w/w) in the emulsion, the droplets exhibited a more uniform and consistent state in the emulsion. In addition, CPP was able to inhibit the formation of complex spatial network structures of proteins during autoclaving by binding with Ca²⁺, thus improving the thermal stability and storage stability of WPEs-HMB-Ca. This work might provide theoretical guidance for developing functional milk drinks with good thermal stability and flavor.

Process Optimization, Structural Characterization, and Calcium Release Rate Evaluation of Mung Bean Peptides-Calcium Chelate

To reduce grievous ecological environment pollution and protein resource waste during mung bean starch production, mung bean peptides-calcium chelate (MBP-Ca) was synthesized as a novel and efficient calcium supplement. Under the optimal conditions (pH = 6, temperature = 45 °C, mass ratio of mung bean peptides (MBP)/CaCl₂ = 4:1, MBP concentration = 20 mg/mL, time = 60 min), the obtained MBP-Ca achieved a calcium chelating rate of 86.26%. MBP-Ca, different from MBP, was a new compound rich in glutamic acid (32.74%) and aspartic acid (15.10%). Calcium ions could bind to MBP mainly through carboxyl oxygen, carbonyl oxygen, and amino nitrogen atoms to form MBP-Ca. Calcium ions-induced intra- and intermolecular interactions caused the folding and aggregation of MBP. After the chelation reaction between calcium ions and MBP, the percentage of β-sheet in the secondary structure of MBP increased by 1.90%, the size of the peptides increased by 124.42 nm, and the dense and smooth surface structure of MBP was transformed into fragmented and coarse blocks. Under different temperatures, pH, and gastrointestinal simulated digestion conditions, MBP-Ca exhibited an increased calcium release rate compared with the conventional calcium supplement CaCl₂. Overall, MBP-Ca showed promise as an alternative dietary calcium supplement with good calcium absorption and bioavailability.

Biocompatibility and osteoinductive ability of casein phosphopeptide modified polyetheretherketone

Polyetheretherketone (PEEK) is a potential implant material for dental application due to its excellent mechanical properties. However, its biological inertness and poor osteoinductive ability limited its clinical application. Based on a lay-by-layer self-assembly technique, here we incorporated casein phosphopeptide (CPP) onto PEEK surface by a simple two-step strategy to address the poor osteoinductive ability of PEEK implants. In this study, the PEEK specimens were positively charged by 3-ammoniumpropyltriethoxysilane (APTES) modification, then the CPP was adsorbed onto the positively charged PEEK surface electrostatically to obtain CPP-modified PEEK (PEEK-CPP) specimens. The surface characterization, layer degradation, biocompatibility and osteoinductive ability of the PEEK-CPP specimens were studied in vitro. After CPP modification, the PEEK-CPP specimens had a porous and hydrophilic surface and presented enhanced cell adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 cells. These findings indicated that CPP modification could significantly improve the biocompatibility and osteoinductive ability of PEEK-CPP implants in vitro. In a word, CPP modification is a promising strategy for the PEEK implants to achieve osseointegration.