Simultaneous analysis of 10 polycyclic aromatic hydrocarbons in roasted coffee by isotope dilution gas chromatography-mass spectrometry: Optimization, in-house method validation and application to an exploratory study

Simultaneous determination of 12 novel brominated flame retardants and their potential exposure via the dietary intake of processed foods in Korea

This study has developed an analytical method employing gas chromatography-tandem mass spectrometry (GC-MS/MS) to quantify 12 novel brominated flame retardants (NBFRs) in processed food, aiming to evaluate the potential exposure via human dietary consumption. The proposed approach incorporates a multilayer silica gel column with additional liquid-liquid or solid-phase extraction steps for low- and high-fat food matrices respectively. This method is rigorously validated and applied to 273 samples across 39 food types. This study also evaluates the variance in NBFR presence across different food processing stages, and demonstrates an increase in the diversity of NBFRs in the more heavily processed stages. This research not only fills a critical methodological void but also aids in the risk assessment of NBFRs, paving the way for improved food safety regulations and public health policies.

Polycyclic Aromatic Hydrocarbons' Impact on Crops and Occurrence, Sources, and Detection Methods in Food: A Review

Polycyclic aromatic hydrocarbons (PAHs) represent a category of persistent organic pollutants that pose a global concern in the realm of food safety due to their recognized carcinogenic properties in humans. Food can be contaminated with PAHs that are present in water, air, or soil, or during food processing and cooking. The wide and varied sources of PAHs contribute to their persistent contamination of food, leading to their accumulation within these products. As a result, monitoring of the levels of PAHs in food is necessary to guarantee the safety of food products as well as the public health. This review paper attempts to give its readers an overview of the impact of PAHs on crops, their occurrence and sources, and the methodologies employed for the sample preparation and detection of PAHs in food. In addition, possible directions for future research are proposed. The objective is to provide references for the monitoring, prevention, and in-depth exploration of PAHs in food.

Search for new green natural solid phases for sample preparation for PAHs determination in seafood samples followed by LC and GC-MS/MS analysis

Polycyclic aromatic hydrocarbons (PAHs) are carcinogenic organic pollutants found in various environments, notably aquatic ecosystems and the food chain, posing significant health risks. Traditional methods for detecting PAHs in food involve complex processes and considerable reagent usage, raising environmental concerns. This study explores eco-friendly approaches suing solid phases derived from natural sources in matrix solid phase dispersion. We aimed to develop, optimize, and validate a sample preparation technique for seafood, employing natural materials for PAH analysis. Ten natural phases were compared with a commercial reference phase. The methodology involved matrix solid phase dispersion and pressurized liquid extraction, followed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Three solid phases (perlite, sweet manioc starch, and barley) showed superior performance in LC-MS/MS and were further evaluated with gas chromatography-tandem mass spectrometry (GC-MS/MS), confirming perlite as the most effective phase. Validation followed Brazilian regulatory guidelines and European Community Regulation 2021/808/EC. The resulting method offered advantages in cost-effectiveness, reduced environmental impact, cleaner extracts, and enhanced analytical performance compared to the reference solid phase and LC-MS/MS. Proficiency analysis confirmed method reliability, with over 50% alignment with green analytical chemistry principles. In conclusion, this study developed an environmentally sustainable sample preparation technique for seafood analysis using natural solid phases, particularly perlite, for PAH determination.

Rapid and Sensitive Detection of Polycyclic Aromatic Hydrocarbons in Tea Leaves Using Magnetic Approach

A rapid and efficient method using an alkyl-functionalized magnetic nanoparticles-based extraction technique combined with Ultra-High Performance Liquid Chromatography was developed for the detection of trace amounts of polycyclic aromatic hydrocarbons in tea leaves. As a popular coating for chromatographic column packing materials, C₁₈-alkyl has been demonstrated to be effective in separating polycyclic aromatic hydrocarbons. Additionally, the magnetism of the nanomaterials accelerates the extraction process while their high surface ratio enables desirable dispersity in the sample matrix. Meanwhile, the adsorbents can be washed and reused 30 times without compromising recovery, which greatly reduces the budget. The effects of various parameters were investigated and optimized, and the recoveries for five analytes were in the range of 84.8-105.4%. The RSD of intra-day and inter-day were below 11.9% and 6.8%, respectively. The limits of detection and limits of quantification ranged from 1.69-9.97 ng g^-1 and 5.12-30.21 ng g^-1, indicating satisfactory sensitivity. Thus, the proposed methodology is rapid, highly efficient, and economical, and it expands the application of magnetic cleanup approaches in complex food matrices.

Pressurized Liquid Extraction: A Powerful Tool to Implement Extraction and Purification of Food Contaminants

Pressurized liquid extraction (PLE) is considered an advanced extraction technique developed in the mid-1990s with the aim of saving time and reducing solvent with respect to traditional extraction processes. It is commonly used with solid and semi-solid samples and employs solvent extraction at elevated temperatures and pressures, always below the respective critical points, to maintain the solvent in a liquid state throughout the extraction procedure. The use of these particular pressure and temperature conditions changes the physicochemical properties of the extraction solvent, allowing easier and deeper penetration into the matrix to be extracted. Furthermore, the possibility to combine the extraction and clean-up steps by including a layer of an adsorbent retaining interfering compounds directly in the PLE extraction cells makes this technique extremely versatile and selective. After providing a background on the PLE technique and parameters to be optimized, the present review focuses on recent applications (published in the past 10 years) in the field of food contaminants. In particular, applications related to the extraction of environmental and processing contaminants, pesticides, residues of veterinary drugs, mycotoxins, parabens, ethyl carbamate, and fatty acid esters of 3-monochloro-1,2-propanediol and 2-monochloro-1,3-propanediol from different food matrices were considered.

Advances of stable isotope technology in food safety analysis and nutrient metabolism research

Food quality, safety, and the regulatory metabolism of food nutrients in cells are primary factors in determining human health. However, residues of undesirable or hazardous compounds in food products and dysregulation in the nutrient metabolism inevitably occur occasionally. For years, chromatography-mass spectrometry technology has been recognized as an essential research tool in food analysis and nutrient metabolism research, and it is more accurate and robust when coupled with stable isotopes. In this study, we summarize the applications of stable isotope technology in the quantification of contaminant residues (pesticides, veterinary drugs, mycotoxins, polycyclic aromatic hydrocarbons, and other hazardous compounds) in foods and in the nutrients (glucose, lipids, amino acids and proteins) metabolism research. The aim of this review was to serve as a reference for providing effective analysis techniques for protecting food quality and human health, and to pave the way for the broader application of stable isotope technology.

Thermal Contaminants in Coffee Induced by Roasting: A Review

Roasting is responsible for imparting the main characteristics to coffee, but the high temperatures used in the process can lead to the formation of several potentially toxic substances. Among them, polycyclic aromatic hydrocarbons, acrylamide, furan and its derivative compounds, α-dicarbonyls and advanced glycation end products, 4-methylimidazole, and chloropropanols stand out. The objective of this review is to present a current and comprehensive overview of the chemical contaminants formed during coffee roasting, including a discussion of mitigation strategies reported in the literature to decrease the concentration of these toxicants. Although the formation of the contaminants occurs during the roasting step, knowledge of the coffee production chain as a whole is important to understand the main variables that will impact their concentrations in the different coffee products. The precursors and routes of formation are generally different for each contaminant, and the formed concentrations can be quite high for some substances. In addition, the study highlights several mitigation strategies related to decreasing the concentration of precursors, modifying process conditions and eliminating/degrading the formed contaminant. Many of these strategies show promising results, but there are still challenges to be overcome, since little information is available about advantages and disadvantages in relation to aspects such as costs, potential for application on an industrial scale and impacts on sensory properties.

Legacy and emerging pollutants in Latin America: A critical review of occurrence and levels in environmental and food samples

The increase and indiscriminate use of personal care products, food products, fertilizers, pesticides, and health products, among others, have resulted/are resulting in extensive environmental contamination. Most of these products contain traces of widespread chemicals, usually known as emerging pollutants (EPs) or pollutants of emerging concern (PEC). The Latin American (LA) region comprises 20 countries with different social and cultural aspects, with 81 % of the population living in urban areas. The LA region has some countries on the top list of users/consumers of EPs, from pesticides and fertilizers to personal care products. However, there is a gap in information related to the distribution of EPs in the environment of this region, with very few existing review texts exploring this issue. Therefore, this present paper advances this approach. An exhaustive literature review, with the selection of 176 documents, provided unique up-to-date information on the presence/distribution of 17 classes of legacy or emerging pollutants in different food and environmental matrices (soil, sediment, water, and air). The study shows that the wide distribution and recorded levels of these pollutants in the continental environment are potential risks to human health, mainly through food and drinking water ingestion. Polycyclic aromatic hydrocarbons are pollutants of deep public concern since they show carcinogenic properties. Several classes of pollutants, like endocrine disruptors, have caused harmful effects on humans and the environment. Besides that, pharmaceutical products and pesticides are compounds of high consumption worldwide, being environmental contamination a real and ongoing possibility. Finally, gaps and future research needs are deeply pointed out.

Coffee Silverskin: Chemical and Biological Risk Assessment and Health Profile for Its Potential Use in Functional Foods

The coffee supply chain is characterized by a complex network with many critical and unsustainable points producing a huge amount of waste products. Among these, coffee silverskin (CS), the only by-product of the coffee roasting phase, has an interesting chemical profile that suggests potential use as a food ingredient. However, few data on its safety are available. For this reason, the purpose of the study was to assess the occurrence of chemical and biological contaminants in CS, and the resulting risk due to its potential consumption. Essential, toxic, and rare earth elements, polycyclic aromatic hydrocarbons (PAHs), process contaminants, ochratoxin A (OTA), and pesticides residues were analyzed in three classes of samples (Coffea arabica CS, Coffea robusta CS, and their blend). Furthermore, total mesophilic bacteria count (TMBC) at 30 °C, Enterobacteriaceae, yeasts, and molds was evaluated. The risk assessment was based upon the hazard index (HI) and lifetime cancer risk (LTCR). In all varieties and blends, rare earth elements, pesticides, process contaminants, OTA, and PAHs were not detected except for chrysene, phenanthrene, and fluoranthene, which were reported at low concentrations only in the arabica CS sample. Among essential and toxic elements, As was usually the most representative in all samples. Microorganisms reported a low load, although arabica and robusta CS showed lower contamination than mixed CS. Instead, the risk assessment based on the potential consumption of CS as a food ingredient did not show either non-carcinogenic or carcinogenic risk. Overall, this study provides adequate evidence to support the safety of this by-product for its potential use in functional foods.

Polycyclic Aromatic Hydrocarbons (PAHs) Sample Preparation and Analysis in Beverages: A Review

The monitoring of food contaminants is of interests to both food regulatory bodies and the consumers. This literature review covers polycyclic aromatic hydrocarbons (PAHs) with regard to their background, sources of exposures, and occurrence in food and environment as well as health hazards. Furthermore, analytical methods focusing on the analysis of PAHs in tea, coffee, milk, and alcoholic samples for the last 16 years are presented. Numerous experimental methods have been developed aiming to obtain better limits of detections (LODs) and percent recoveries as well as to reduce solvent consumption and laborious work. These include information such as the selected PAHs analyzed, food matrix of PAHs, methods of extraction, cleanup procedure, LOD, limits of quantitation (LOQ), and percent recovery. For the analysis of tea, coffee, milk, and alcoholic samples, a majority of the research papers focused on the 16 US Environmental Protection Agency PAHs, while PAH4, PAH8, and methylated PAHs were also of interests. Extraction methods range from the classic Soxhlet extraction and liquid–liquid extraction to newer methods such as QuEChERS, dispersive solid-phase microextraction, and magnetic solid-phase extraction. The cleanup methods involved mainly the use of column chromatography and SPE filled with either silica or Florisil adsorbents. Gas chromatography and liquid chromatography coupled with mass spectrometry or fluorescence detectors are the main analytical instruments used. A majority of the selected combined methods used are able to achieve LODs and percent recoveries in the ranges of 0.01–5 ug/kg and 70–110%, respectively, for the analysis of tea, coffee, milk, and alcoholic samples.

Polycyclic aromatic hydrocarbons, pesticides, and metals in olive: analysis and probabilistic risk assessment

In the present study, levels of 22 pesticides, eight metals, and 16 polycyclic aromatic hydrocarbons (PAHs) in 1800 Iranian olive samples (20 cultivars from six different cultivation zones), were determined; then, health risk posed by oral consumption of the olive samples to Iranian consumers was assessed. Quantification of PAHs and pesticides was done by chromatography-mass spectrometry (GC-MS), and metal levels were determined using inductively coupled plasma-optical emission spectrometry (ICP-OES). There were no significant differences among the cultivars and zones in terms of the levels of the tested compounds. Target hazard quotients (THQ) were <1.0 for all pesticides, and total hazard indices (HI) indicated di minimis risk. At the 25th or 95th centiles, Incremental Life Time Cancer Risks (ILCRs) for carcinogenic elements, arsenic, and lead and noncarcinogenic metals did not exhibit a significant hazard (HI <1.0 for both cases). At the 25th or 95th centiles, ILCR and margins of exposure (MoE) for PAHs indicated di minimis risk. Sensitivity analysis showed that concentrations of contaminants had the most significant effect on carcinogenic and noncarcinogenic risks.

Polycyclic aromatic hydrocarbons in coffee samples: Enquiry into processes and analytical methods

Polycyclic aromatic hydrocarbons (PAHs) are considered to be potentially genotoxic and carcinogenic in humans. These ubiquitous environmental pollutants may derive from the incomplete combustion and pyrolysis of organic matter. Coffee is an extensively consumed drink, and its PAHs contamination is not only ascribed to environmental pollution, but mainly to the roasting processes. Although no fixed limits have yet been set for residual PAHs in coffee, the present review intends to summarise and discuss the knowledge and recent advances in PAHs formation during roasting. Because coffee origin and brewing operations may affect PAHs content, we thoroughly analysed the literature on extraction and purification procedures, as well as the main analytical chromatographic methods for both coffee powders and brews. With regards to the safety of this appreciated commodity, the control on the entire production chain is desirable, because of coffee beverage could contribute to the daily human intake of PAHs.

Processing effects on acrylamide content in roasted coffee production

Acrylamide is a toxic compound that develops during the roasting process of coffee beans. According to literature, the levels of acrylamide in coffee vary with the percentage of Robusta type in the mix and with the time-temperature parameters during the roasting process. Therefore, this study aimed to find the best roasting conditions in order to mitigate acrylamide formation. Two types of roasted coffee (Arabica and Robusta) were analyzed through GC-MS and two clean-up methods were compared. The best roasting conditions were optimized on an industrial scale and the median levels of acrylamide decreased from the range 170-484 µg kg^-1 to 159-351 µg kg^-1, after the optimization of roasting parameters. Therefore, the choice of the best conditions, according to the percentage of Robusta type in the finished product, could be an efficient mitigation strategy for acrylamide formation in coffee, maintaining the manufacturer's requirements of the finished product.

Effect of mild roasting on Arabica and Robusta coffee beans contamination with polycyclic aromatic hydrocarbons

The aim of this research was to establish the effect of mild roasting on coffee beans contamination level by polycyclic aromatic hydrocarbons (PAHs). The materials investigated were green Arabica and Robusta coffee beans imported from different countries, as well as those already roasted. The experiment was carried out in a coffee-roasting plant, with the use of an electric coffee roaster, at the temperature of 125-135 °C for 25-26 min. PAHs analysis was conducted by means of high-performance liquid chromatography with fluorescence and diode array detectors (HPLC-FLD/DAD). Results had been verified by means of gas chromatography with mass spectrometry. Contamination level for 19 PAHs, 15 of which were heavy PAHs included on the list of European Union Scientific Committee in Food, varied from 4.29 to 16.17 µg/kg in roasted coffee beans, whereas in green coffee beans varied from 8.66 to 76.63 µg/kg. The results of statistical analysis showed that the contamination level in roasted coffee beans was significantly lower than that in green beans. The applied parameters of roasting did not lead to the occurrence of conditions in which PAHs, especially heavy ones, would possibly be formed. On the contrary, the roasting process itself had significantly reduced the PAHs content in the final product. The reason for this phenomenon was relatively high volatility of light PAHs.

Comparative oesophageal cancer risk assessment of hot beverage consumption (coffee, mate and tea): the margin of exposure of PAH vs very hot temperatures

Background

Consumption of very hot (> 65 °C) beverages is probably associated with increased risk of oesophageal cancer. First associations were reported for yerba mate and it was initially believed that high content of polycyclic aromatic hydrocarbons (PAH) might explain the risk. Later research on other beverage groups such as tea and coffee, which are also consumed very hot, found associations with increased risk of oesophageal cancer as well. The risk may therefore not be inherent in any compound contained in mate, but due to temperature. The aim of this study was to quantitatively assess the risk of PAH in comparison with the risk of the temperature effect using the margin of exposure (MOE) methodology.

Methods

The human dietary benzo[a]pyrene (BaP) and PAH4 (sum of benzo[a]pyrene, benzo[a]anthracene, chrysene, and benzo[b]fluoranthene) exposure through consumption of coffee, mate, and tea was estimated. The oesophageal cancer risk assessment for both PAH and temperature was conducted using the MOE approach.

Results

Considering differences in the transfer of the PAH from the leaves of mate and tea or from the ground coffee to the infusion, and considering the different preparation methods, exposures may vary considerably. The average individual exposure in μg/kg bw/day arising from consumption of 1 cup (0.2 L) of infusion was highest for mate (2.85E-04 BaP and 7.22E-04 PAH4). The average per capita exposure in μg/kg bw/day was as follows: coffee (4.21E-04 BaP, 4.15E-03 PAH4), mate (4.26E-03 BaP, 2.45E-02 PAH4), and tea (8.03E-04 BaP, 4.98E-03 PAH4). For all individual and population-based exposure scenarios, the average MOE for BaP and PAH4 was > 100,000 independent of beverage type. MOE values in this magnitude are considered as a very low risk. On the contrary, the MOE for the temperature effect was estimated as < 1 for very hot drinking temperatures, corroborating epidemiological observations about a probable oesophageal cancer risk caused by this behaviour.

Conclusions

The temperature effect but not PAH exposure may pose an oesophageal cancer risk. Consumer education on risks associated with consumption of ‘very hot’ beverages and policy measures to threshold serving temperatures should be discussed.

Electronic supplementary material

The online version of this article (10.1186/s12885-018-4060-z) contains supplementary material, which is available to authorized users.

Gas chromatography-mass spectrometry determination of polycyclic aromatic hydrocarbons in baby food using QuEChERS combined with low-density solvent dispersive liquid-liquid microextraction

A sensitive GC-MS method is reported for the determination of twelve polycyclic aromatic hydrocarbons (PAHs) in baby food. The sample preparation involves QuEChERS extraction combined with low-density solvent dispersive liquid-liquid microextraction (LDS-DLLME) and ultra-low temperature (-80 °C). Plackett-Burman screening design was employed to identify the main sample preparation variables that affect the extraction efficiency, such as the volume of toluene used in LDS-DLLME. The suitability of proposed method was verified by analytical selectivity, linearity in solvent and matrix-matched calibration curves and adequate recoveries (72-112%) and precision (RSD values ≤11%), under repeatability and within-laboratory reproducibility conditions. High analytical sensitivity was achieved for the monitoring of PAHs at the strict limit of 1 µg kg^-1 fixed by the European Commission for baby foods. The validated method was applied to thirty-two commercial baby food samples, and the investigated PAHs were not detected in any sample.

Accelerated solvent extraction method for the quantification of polycyclic aromatic hydrocarbons in cocoa beans by gas chromatography-mass spectrometry

An accelerated solvent extraction (ASE) procedure for use with gas chromatography-mass spectrometry (GC-MS) was optimized for the determination of eight polycyclic aromatic hydrocarbons (PAHs) in cocoa beans. Plackett-Burman and rotatable central composite design (RCCD) indicated that three variables affected the recoveries of PAHs during the extraction and purification steps: agitation time in the second liquid-liquid partition, weight of silica gel in the column, and volume of hexane for PAH elution from the column. After obtaining the optimal conditions, a single laboratory method validation was performed. Linearity was demonstrated for benzo[a]pyrene in the concentration range from 0.5 to 8.0mgkg^-1 of sample, corresponding to 1.25-20.0μgkg^-1 of cocoa on a fat basis. For the other analytes, linearity was observed from 0.75 to 8.0μgkg^-1 of sample (1.88-20.0μgkg^-1 of cocoa on a fat basis). Significant matrix effects were found for chrysene and benzo[b]fluoranthene. The precision of the method was verified with relative standard deviations (RSDs) ranging from 2.57 to 14.13% and from 4.36 to 19.77% under repeatability and intermediate precision conditions, respectively. The average recoveries of the eight PAHs ranged from 74.99 to 109.73%. These parameters, limits and measurement uncertainties met the performance criteria established by European Union regulations, except for the theoretical limit of detection for chrysene. The method was applied to the analysis of samples of Brazilian cocoa beans, and only one sample was found to have a PAH content above the maximum limit defined by the European Union legislation. This optimized and validated method is intended to be used as part of the official Brazilian monitoring programs investigating contaminants and residues in food.

Single-laboratory validation of a saponification method for the determination of four polycyclic aromatic hydrocarbons in edible oils by HPLC-fluorescence detection

An analytical method is reported for the determination of four polycyclic aromatic hydrocarbons (benzo[a]pyrene (BaP), benz[a]anthracene (BaA), benzo[b]fluoranthene (BbF) and chrysene (CHR)) in edible oils (sesame, maize, sunflower and olive oil) by high-performance liquid chromatography. Sample preparation is based on three steps including saponification, liquid-liquid partitioning and, finally, clean-up by solid phase extraction on 2 g of silica. Guidance on single-laboratory validation of the proposed analysis method was taken from the second edition of the Eurachem guide on method validation. The lower level of the working range of the method was determined by the limits of quantification of the individual analytes, and the upper level was equal to 5.0 µg kg(-1). The limits of detection and quantification of the four PAHs ranged from 0.06 to 0.12 µg kg(-1) and from 0.13 to 0.24 µg kg(-1). Recoveries of more than 84.8% were achieved for all four PAHs at two concentration levels (2.5 and 5.0 µg kg(-1)), and expanded relative measurement uncertainties were below 20%. The performance of the validated method was in all aspects compliant with provisions set in European Union legislation for the performance of analytical methods employed in the official control of food. The applicability of the method to routine samples was evaluated based on a limited number of commercial edible oil samples.