Use of near infrared spectroscopy coupled with chemometrics for fast detection of irradiated dry fermented sausages

Artificial neural network-based shelf life prediction approach in the food storage process: A review

The prediction of food shelf life has become a vital tool for distributors and consumers, enabling them to determine storage and optimal edible time, thus avoiding unexpected food waste. Artificial neural network (ANN) have emerged as an effective, fast and accurate method for modeling, simulating and predicting shelf life in food. ANNs are capable of tackling nonlinear, complex and ill-defined problems between the variables without prior knowledge. ANN model exhibited excellent fit performance evidenced by low root mean squared error and high correlation coefficient. The low relative error between actual values and predicted values from the ANN model demonstrates its high accuracy. This paper describes the modeling of ANN in food quality prediction, encompassing commonly used ANN architectures, ANN simulation techniques, and criteria for evaluating ANN model performance. The review focuses on the application of ANN for modeling nonlinear food quality during storage, including dairy, meat, aquatic, fruits, and vegetables products. The future prospects of ANN development mainly focus on optimal models and learning algorithm selection, multiple model fusion, self-learning and self-correcting shelf-life prediction model development, and the potential utilization of deep learning techniques.

The Role of Near-Infrared Spectroscopy in Food Quality Assurance: A Review of the Past Two Decades

During food quality control, NIR technology enables the rapid and non-destructive determination of the typical quality characteristics of food categories, their origin, and the detection of potential counterfeits. Over the past 20 years, the NIR results for a variety of food groups-including meat and meat products, milk and milk products, baked goods, pasta, honey, vegetables, fruits, and luxury items like coffee, tea, and chocolate-have been compiled. This review aims to give a broad overview of the NIRS processes that have been used thus far to assist researchers employing non-destructive techniques in comparing their findings with earlier data and determining new research directions.

Rapid analysis technologies with chemometrics for food authenticity field: A review

In recent years, the problem of food adulteration has become increasingly rampant, seriously hindering the development of food production, consumption, and management. The common analytical methods used to determine food authenticity present challenges, such as complicated analysis processes and time-consuming procedures, necessitating the development of rapid, efficient analysis technology for food authentication. Spectroscopic techniques, ambient ionization mass spectrometry (AIMS), electronic sensors, and DNA-based technology have gradually been applied for food authentication due to advantages such as rapid analysis and simple operation. This paper summarizes the current research on rapid food authenticity analysis technology from three perspectives, including breeds or species determination, quality fraud detection, and geographical origin identification, and introduces chemometrics method adapted to rapid analysis techniques. It aims to promote the development of rapid analysis technology in the food authenticity field.

ATR-FTIR spectroscopy combined with chemometrics to assess the spectral markers of irradiated baijius and their potential application in irradiation dose control

Although some methods have been proposed for the identification of irradiated baijius, they are often costly, time-consuming, and destructive. It is also unclear what instrumentation can be used to fully characterize the quality changes in irradiated baijius. To address this issue, this study pioneers the use of attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy in combination with chemometrics to open up new avenues for characterizing irradiated baijius and their quality control. Principal component analysis, five spectral pre-processing methods (Savitzky-Golay smoothing (S-G), second-order derivative (SD), multiple scattering correction (MSC), S-G + SD and S-G + MSC), five wavelength selection methods (random forest variable importance (RFVI), two-dimensional correlation spectroscopy (2D-COS), variable importance in projection (VIP), ReliefF, and Venn), and three classification models (partial least squares-discriminant analysis (PLS-DA), random forest (RF), and grasshopper optimization algorithm-based support vector machine (GOA-SVM)) were integrated into the analytical framework of ATR-FTIR spectroscopy, aiming to accurately identify baijiu samples according to different irradiation doses and to search for irradiation-induced spectral difference characteristics (spectral markers). The results showed that SD was the best spectral pre-processing method, and RF models constructed using the 20 most competitive and discriminative spectral markers (selected by Venn) could achieve accurate identification of baijiu samples based on irradiation dose (0, 4, 6, and 8 kGy). After Pearson correlation analysis, the five significantly (P＜0.05) changed spectral markers (1596, 2025, 2309, 2329, and 2380 cm-1) were attributed to changes in the content of total acids, alcohols, and aromatic compounds. These findings demonstrate for the first time the potential of ATR-FTIR spectroscopy as a fast, low-cost, and non-destructive tool for the characterization and identification of irradiated baijiu samples. This approach may also offer a promising solution for labeling management of irradiated foods, vintage identification of baijius, and brand protection.

Can Near-Infrared Spectroscopy Replace a Panel of Tasters in Sensory Analysis of Dry-Cured Bísaro Loin?

This study involved a comprehensive examination of sensory attributes in dry-cured Bísaro loins, including odor, androsterone, scatol, lean color, fat color, hardness, juiciness, chewiness, flavor intensity and flavor persistence. An analysis of 40 samples revealed a wide variation in these attributes, ensuring a robust margin for multivariate calibration purposes. The respective near-infrared (NIR) spectra unveiled distinct peaks associated with significant components, such as proteins, lipids and water. Support vector regression (SVR) models were methodically calibrated for all sensory attributes, with optimal results using multiplicative scattering correction pre-treatment, MinMax normalization and the radial base kernel (non-linear SVR model). This process involved partitioning the data into calibration (67%) and prediction (33%) subsets using the SPXY algorithm. The model parameters were optimized via a hybrid algorithm based on particle swarm optimization (PSO) to effectively minimize the root-mean-square error (RMSECV) derived from five-fold cross-validation and ensure the attainment of optimal model performance and predictive accuracy. The predictive models exhibited acceptable results, characterized by R-squared values close to 1 (0.9616-0.9955) and low RMSE values (0.0400-0.1031). The prediction set's relative standard deviation (RSD) remained under 5%. Comparisons with prior research revealed significant improvements in prediction accuracy, particularly when considering attributes like pig meat aroma, hardness, fat color and flavor intensity. This research underscores the potential of advanced analytical techniques to improve the precision of sensory evaluations in food quality assessment. Such advancements have the potential to benefit both the research community and the meat industry by closely aligning their practices with consumer preferences and expectations.

Current State of Milk, Dairy Products, Meat and Meat Products, Eggs, Fish and Fishery Products Authentication and Chemometrics

Food fraud is a matter of major concern as many foods and beverages do not follow their labelling. Because of economic interests, as well as consumers' health protection, the related topics, food adulteration, counterfeiting, substitution and inaccurate labelling, have become top issues and priorities in food safety and quality. In addition, globalized and complex food supply chains have increased rapidly and contribute to a growing problem affecting local, regional and global food systems. Animal origin food products such as milk, dairy products, meat and meat products, eggs and fish and fishery products are included in the most commonly adulterated food items. In order to prevent unfair competition and protect the rights of consumers, it is vital to detect any kind of adulteration to them. Geographical origin, production methods and farming systems, species identification, processing treatments and the detection of adulterants are among the important authenticity problems for these foods. The existence of accurate and automated analytical techniques in combination with available chemometric tools provides reliable information about adulteration and fraud. Therefore, the purpose of this review is to present the advances made through recent studies in terms of the analytical techniques and chemometric approaches that have been developed to address the authenticity issues in animal origin food products.

Estimation of doses absorbed by potato tubers under electron beam or X-ray irradiation using an optical fingerprinting strategy

High-energy electron beam and X-ray processing of foods can be used for extending their storage life and for combating pests and pathogens. Several instrumental techniques are used to estimate irradiation doses in foods, but these methods are complex and laborious, require expensive equipment, and do not always allow to determine low doses. This study was aimed at developing simple methods for detecting irradiation in potato tubers and for dose estimation. We used a "fingerprinting" strategy that does not involve quantitation of any compound; instead, the rate of indicator reactions involving carbocyanine dyes is measured. The dye content was monitored by its near-infrared fluorescence intensity and visible-light absorption. Potatoes not subjected to treatment and those irradiated with different doses (10, 100, 1000, 5000, or 10,000 Gray) could be distinguished by linear discriminant analysis. Thus, the order of magnitude of the absorbed dose can be estimated with 89% ± 3% accuracy for a mixture of tubers of two potato varieties irradiated with an electron beam or with 95% ± 8% accuracy for one variety irradiated with an X-ray source.

Evaluation and monitoring of the quality of sausages by different analytical techniques over the last five years

Sausages are among the most vulnerable and perishable products, although those products are an important source of essential nutrients for human organisms. The evaluation of the quality of sausages becomes more and more required by consumers, producers, and authorities to thwarter falsification. Numerous analytical techniques including chemical, sensory, chromatography, and so on, are employed for the determination of the quality and authenticity of sausages. These methods are expensive and time consuming, and are often sensitive to significant sources of variation. Therefore, rapid analytical techniques such as fluorescence spectroscopy, near infrared (NIR), mid infrared (MIR), nuclear magnetic resonance (NMR), among others were considered helpful tools in this domain. This review will identify current gaps related to different analytical techniques in assessing and monitoring the quality of sausages and discuss the drawbacks of existing analytical methods regarding the quality and authenticity of sausages from 2015 up to now.

Determination of acid value during edible oil storage using a portable NIR spectroscopy system combined with variable selection algorithms based on an MPA-based strategy

BACKGROUND

The acid value is an important indicator for evaluating the quality of edible oil during storage. This study employs a portable near-infrared (NIR) spectroscopy system to determine the acid value during edible oil storage. Four MPA-based variable selection methods, namely competitive adaptive reweighted sampling (CARS), the variable iterative space shrinkage approach (VISSA), iteratively variable subset optimization (IVSO), and bootstrapping soft shrinkage (BOSS) were introduced to optimize the preprocessed NIR spectra. Support vector machine (SVM) models based on characteristic spectra obtained by different selection methods were then established to achieve quantitative detection of the acid value during edible oil storage.

RESULTS

The results revealed that, compared with the full-spectrum SVM model, the SVM models established by the characteristic wavelengths optimized by the variable selection methods based on the MPA strategy exhibit a significant improvement in complexity and generalization performance. Furthermore, compared with the CARS, VISSA, and IVSO methods, the BOSS method obtained the least number of characteristic wavelength variables, and the SVM model established based on the optimized features of this method exhibited the optimal prediction performance. The root mean square error of prediction (RMSEP) was 0.11 mg g-1, the coefficient of determination (Rp2) was 0.92 and the ratio performance deviation (RPD) was 2.82, respectively.

CONCLUSION

The overall results indicate that the variable selection methods based on the MPA strategy can select more targeted characteristic variables. This has good application prospects in NIR spectra feature optimization. © 2020 Society of Chemical Industry.

Histamine Control in Raw and Processed Tuna: A Rapid Tool Based on NIR Spectroscopy

The present study was designed to investigate whether near infrared (NIR) spectroscopy with minimal sample processing could be a suitable technique to rapidly measure histamine levels in raw and processed tuna fish. Calibration models based on orthogonal partial least square regression (OPLSR) were built to predict histamine in the range 10–1000 mg kg⁻¹ using the 1000–2500 nm NIR spectra of artificially-contaminated fish. The two models were then validated using a new set of naturally contaminated samples in which histamine content was determined by conventional high-performance liquid chromatography (HPLC) analysis. As for calibration results, coefficient of determination (r²) > 0.98, root mean square of estimation (RMSEE) ≤ 5 mg kg⁻¹ and root mean square of cross-validation (RMSECV) ≤ 6 mg kg⁻¹ were achieved. Both models were optimal also in the validation stage, showing r² values > 0.97, root mean square errors of prediction (RMSEP) ≤ 10 mg kg⁻¹ and relative range error (RER) ≥ 25, with better results showed by the model for processed fish. The promising results achieved suggest NIR spectroscopy as an implemental analytical solution in fish industries and markets to effectively determine histamine amounts.

Hyperspectral Imaging Coupled with Multivariate Analysis and Image Processing for Detection and Visualisation of Colour in Cooked Sausages Stuffed in Different Modified Casings

A hyperspectral imaging system was for the first time exploited to estimate the core colour of sausages stuffed in natural hog casings or in two hog casings treated with solutions containing surfactants and lactic acid in slush salt. Yellowness of sausages stuffed in natural hog casings (control group, 20.26 ± 4.81) was significantly higher than that of sausages stuffed in casings modified by submersion for 90 min in a solution containing 1:30 (w/w) soy lecithin:distilled water, 2.5% wt. soy oil, and 21 mL lactic acid per kg NaCl (17.66 ± 2.89) (p < 0.05). When predicting the lightness and redness of the sausage core, a partial least squares regression model developed from spectra pre-treated with a second derivative showed calibration coefficients of determination (R_c²) of 0.73 and 0.76, respectively. Ten, ten, and seven wavelengths were selected as the important optimal wavelengths for lightness, redness, and yellowness, respectively. Those wavelengths provide meaningful information for developing a simple, cost-effective multispectral system to rapidly differentiate sausages based on their core colour. According to the canonical discriminant analysis, lightness possessed the highest discriminant power with which to differentiate sausages stuffed in different casings.

Fraud in Animal Origin Food Products: Advances in Emerging Spectroscopic Detection Methods over the Past Five Years

Animal origin food products, including fish and seafood, meat and poultry, milk and dairy foods, and other related products play significant roles in human nutrition. However, fraud in this food sector frequently occurs, leading to negative economic impacts on consumers and potential risks to public health and the environment. Therefore, the development of analytical techniques that can rapidly detect fraud and verify the authenticity of such products is of paramount importance. Traditionally, a wide variety of targeted approaches, such as chemical, chromatographic, molecular, and protein-based techniques, among others, have been frequently used to identify animal species, production methods, provenance, and processing of food products. Although these conventional methods are accurate and reliable, they are destructive, time-consuming, and can only be employed at the laboratory scale. On the contrary, alternative methods based mainly on spectroscopy have emerged in recent years as invaluable tools to overcome most of the limitations associated with traditional measurements. The number of scientific studies reporting on various authenticity issues investigated by vibrational spectroscopy, nuclear magnetic resonance, and fluorescence spectroscopy has increased substantially over the past few years, indicating the tremendous potential of these techniques in the fight against food fraud. It is the aim of the present manuscript to review the state-of-the-art research advances since 2015 regarding the use of analytical methods applied to detect fraud in food products of animal origin, with particular attention paid to spectroscopic measurements coupled with chemometric analysis. The opportunities and challenges surrounding the use of spectroscopic techniques and possible future directions will also be discussed.