Enhanced inactivation of Salmonella enterica Enteritidis biofilms on the stainless steel surface by proteinase K in the combination with chlorine

Exploring the potential of hydrolytic enzymes combined with antibacterial agents to disrupt pathogenic biofilms and disinfect released cells

Biofilms are bacterial communities encapsulated in a self-produced extracellular polymeric matrix comprising carbohydrates, proteins, lipids, and DNA. This matrix provides structural integrity while significantly enhancing bacterial antibiotic resistance, presenting substantial disinfection challenges. The persistence of biofilm-associated infections and foodborne outbreaks underscores the need for more effective disinfection strategies. Conventional antibacterial agents often are less effective against biofilm-protected cells compared to their efficacy against planktonic (non-attached) bacteria. Integrating hydrolytic enzymes, such as cellulases, proteases, and DNases, into disinfection protocols offers a promising approach by breaking down the biofilm matrix to expose the bacteria. However, the follow-up use of antibacterial agents is important, as enzymes alone do not possess bactericidal properties. Unlike traditional disinfectants, natural antibacterial agents work synergistically with enzymes, enhancing biofilm disruption without compromising the enzymatic activity through oxidation. This review offers a comprehensive analysis of the current knowledge and potential of combining hydrolytic enzymes with disinfectants to disrupt biofilms and eradicate the released bacterial cells, emphasizing applications for clinical and foodborne pathogens.

Synergy of sodium dodecyl sulfate and citric acid in removing bacterial biofilms in hydroponic farming facilities

This research explored various concentrations of sodium dodecyl sulfate (SDS) and citric acid (CA), both individually and in combination, to assess their effectiveness against Salmonella biofilms in hydroponic agriculture systems. Results demonstrated that a combined sanitizer of 0.1% SDS (1.0 ± 0.1 log reduction when used alone) and 1% CA (1.4 ± 0.3 log reduction when used alone) was highly effective in eliminating Salmonella biofilms from polyvinyl chloride pipes in hydroponic systems, reducing biofilm levels to below detectable limits (>5.6 log reduction when used in combination). Confocal laser scanning microscopy showed significantly greater proportions of damaged/dead cells in the 0.1% SDS- and 1% CA-treated samples (82.6 ± 2.6%) than in the single treatment with 0.1% SDS (26.1 ± 3.0%) and 1% CA (31.6 ± 2.5%) (P < 0.05). Fourier transform infrared spectroscopy together with analysis of proteins and polysaccharides in the extracellular polymeric substances of the biofilm matrices showed that the treatment not only affected bacterial viability but also significantly reduced the biomass of the biofilm. In summary, this research provides a foundation for the development of improved cleaning protocols in hydroponic systems, promoting safer and more sustainable farming practices.

Characterization of emetic Bacillus cereus biofilm formation and cereulide production in biofilm

Bacillus cereus is a well-known foodborne pathogen that can cause human diseases, including vomiting caused by emetic toxin, cereulide, requiring 105-108 cells per gram to cause the disease. The bacterial cells may be eliminated during processing, but cereulide can survive in most processing techniques due to its resistance to high temperatures, extreme pH and proteolytic enzymes. Herein, we reported dynamic processes of biofilm formation of four different types and cereulide production within the biofilm. Confocal laser scanning microscopy (CLSM) images revealed that biofilms of the four different types reach each stage at different time points. Among the extracellular polymeric substances (EPS) components of the four biofilms formed by the emetic B. cereus F4810/72 strain, proteins account for the majority. In addition, there are significant differences (p < 0.05) in the EPS components at the same stage among biofilms of different types. The time point at which cereulide was first detected in the four types of biofilms was 24 h. In the biofilm of B. cereus formed in ultra-high-temperature (UHT) milk, the first peak of cereulide appeared at 72 h. The cereulide content of the biofilms formed in BHI was mostly higher than that of the biofilms formed in UHT milk. This study contributes to a better understanding of food safety issues in the industry caused by biofilm and cereulide toxin produced by B. cereus.

The promotion of biofilm dispersion: a new strategy for eliminating foodborne pathogens in the food industry

Food safety is a critical global concern due to its direct impact on human health and overall well-being. In the food processing environment, biofilm formation by foodborne pathogens poses a significant problem as it leads to persistent and high levels of food contamination, thereby compromising the quality and safety of food. Therefore, it is imperative to effectively remove biofilms from the food processing environment to ensure food safety. Unfortunately, conventional cleaning methods fall short of adequately removing biofilms, and they may even contribute to further contamination of both equipment and food. It is necessary to develop alternative approaches that can address this challenge in food industry. One promising strategy in tackling biofilm-related issues is biofilm dispersion, which represents the final step in biofilm development. Here, we discuss the biofilm dispersion mechanism of foodborne pathogens and elucidate how biofilm dispersion can be employed to control and mitigate biofilm-related problems. By shedding light on these aspects, we aim to provide valuable insights and solutions for effectively addressing biofilm contamination issues in food industry, thus enhancing food safety and ensuring the well-being of consumers.

Uncovering the anti-biofilm activity of Ilicicolin B against Staphylococcus aureus

The formation of bacterial biofilms reduces the entry of antibiotics into bacteria and helps bacteria tolerate otherwise lethal concentrations of antimicrobials, leading to antibiotic resistance. Therefore, clearing bacterial biofilm is an effective strategy to tackle drug resistance. Currently, there are no approved antibiotics for inhibiting bacterial biofilm formation. We found that Ilicicolin B had excellent antibacterial activity against MRSA without obvious hemolytic activity. More importantly, Ilicicolin B effectively inhibited the biofilm formation in a concentration-dependent manner by crystal violet colorimetric assay and fluorescence microscopy analysis. Exposure of Staphylococcus aureus to Ilicicolin B for 24 h reduced the protein and polysaccharide components in EPS, suggesting that Ilicicolin B disintegrated the biofilms by dissociating the EPS in a matrix. In addition, Ilicicolin B demonstrated strong antibacterial effects in a murine abscess model of S. aureus. Our findings suggest that Ilicicolin B has the potential to treat S. aureus infection by inhibiting biofilm formation.

Characteristics of Staphylococcus aureus biofilm matured in tryptic soy broth, low-fat milk, or whole milk samples along with inactivation by 405 nm light combined with folic acid

In the present study, the characteristics of Staphylococcus aureus biofilms matured in tryptic soy broth (TSB), low-fat milk, or whole milk samples were identified along with their resistance to 405 nm light with or without folic acid. Phenotypic properties of carbohydrate and protein contents in extracellular polymeric substance (EPS) of S. aureus biofilms matured in different conditions were identified. The carbohydrate content was higher in the biofilm matured in low-fat milk (1.27) than the samples matured in whole milk (0.58) and TSB (0.10). Protein content in the EPS of biofilm was higher in the sample matured in whole milk (6.59) than the samples matured in low-fat milk (3.24) and TSB (2.08). Moreover, the maturation condition had a significant effect on the membrane lipid composition of the biofilm, producing more unsaturated fatty acids in biofilm matured in milk samples. These changes in biofilm matured in milk samples increased the resistance of S. aureus to 405 nm light in the presence of folic acid (LFA). Additionally, transcriptomic analysis was conducted to identify the response of S. aureus biofilm to LFA treatment. Several genes related to DNA and protein protection from oxidative stress along with biofilm accumulation were overexpressed in the LFA-treated biofilms. These results indicate the maturation of S. aureus biofilm in various samples and the biofilms responses to bactericidal treatments.

Extracellular matrix-degrading enzymes as a biofilm control strategy for food-related microorganisms

Biofilm is one of the major problems in food industries and is difficult to be removed or prevented by conventional sanitizers. In this review, we discussed the extracellular matrix-degrading enzymes as a strategy to control biofilms of foodborne pathogenic and food-contaminating bacteria. The biofilms can be degraded by using the enzymes targeting proteins, polysaccharides, extracellular DNA, or lipids which mainly constitute the extracellular polymeric substances of biofilms. However, the efficacy of enzymes varies by the growth medium, bacterial species, strains, or counterpart microorganisms due to a high variation in the composition of extracellular polymeric substances. Several studies demonstrated that the combined treatment using conventional sanitizers or multiple enzymes can synergistically enhance the biofilm removal efficacies. In this review, the application of the immobilized enzymes on solid substrates is also discussed as a potential strategy to prevent biofilm formation on food contact surfaces.

Plasma-activated liquids for mitigating biofilms on food and food contact surfaces

Plasma-activated liquids (PALs) are emerging and promising alternatives to traditional decontamination technologies and have evolved as a new technology for applications in food, agriculture, and medicine. Contamination caused by foodborne pathogens and their biofilms has posed challenges and concerns to the food industry in terms of safety and quality. The nature of the food and the food processing environment are major factors that contribute to the growth of various microorganisms, followed by the biofilm characteristics that ensure their survival in severe environmental conditions and against traditional chemical disinfectants. PALs show an efficient impact against microorganisms and their biofilms, with various reactive species (short- and long-lived ones), physiochemical properties, and plasma processing factors playing a crucial role in mitigating biofilms. Moreover, there is potential to improve and optimize disinfection strategies using a combination of PALs with other technologies for the inactivation of biofilms. The overarching aim of this study is to build a better understanding of the parameters that govern the liquid chemistry generated in a liquid exposed to plasma and how these translate into biological effects on biofilms. This review provides a current understanding of PALs-mediated mechanisms of action on biofilms; however, the precise inactivation mechanism is still not clear and is an important part of the research. Implementation of PALs in the food industry could help overcome the disinfection hurdles and can enhance biofilm inactivation efficacy. Future perspectives in this field to expand existing state of the art to seek breakthroughs for scale-up and implementation of PALs technology in the food industry are also discussed.

Anti-biofilm activity of biochanin A against Staphylococcus aureus

Biofilm-forming Staphylococcus aureus can easily accumulate on various food contact surfaces which induce cross-contamination and are difficult to eliminate in the food industry. This study aimed to evaluate the anti-biofilm effects of natural product biochanin A against S. aureus. Results showed that biochanin A effectively eradicated established S. aureus biofilms on different food-contact materials. Fluorescence microscopic analyses suggested that biochanin A disintegrated the established biofilms by dissociate extracellular polymeric substance (EPS) in matrix. In addition, biochanin A at the sub-MIC concentration also effectively inhibited the biofilm formation by regulating the expression of biofilm-related genes (icaA, srtA, eno) and suppressing the release of EPS in biofilm matrix. Molecular docking also demonstrated that biochanin A conducted strong interactions with biofilm-related proteins (Ica A, Sortase A, and Enolase). These findings demonstrated that biochanin A has the potential to be developed as a potent agent against S. aureus biofilm in food industries. KEY POINTS: • Anti-biofilm effect of biochanin A against S. aureus was revealed for the first time. • Biofilm of S. aureus on various food-contact surfaces were efficiently eradicated. • Biochanin A prevented S. aureus biofilm formation via reducing EPS production.

Antimicrobial Compounds in Food Packaging

This review presents current knowledge on antimicrobial agents that are already used in the food packaging industry. At the beginning, innovative ways of food packaging were discussed, including how smart packaging differs from active packaging, and what functions they perform. Next, the focus was on one of the groups of bioactive components that are used in these packaging, namely antimicrobial agents. Among the antimicrobial agents, we selected those that have already been used in packaging and that promise to be used elsewhere, e.g., in the production of antimicrobial biomaterials. Main groups of antimicrobial agents (i.e., metals and metal oxides, organic acids, antimicrobial peptides and bacteriocins, antimicrobial agents of plant origin, enzymes, lactoferrin, chitosan, allyl isothiocyanate, the reuterin system and bacteriophages) that are incorporated or combined with various types of packaging materials to extend the shelf life of food are described. The further development of perspectives and setting of new research directions were also presented.

Preparation of Acidic Electrolyzed Water by a RuO2@TiO2 Electrode with High Selectivity for Chlorine Evolution and Its Sterilization Effect

The food hygiene problems caused by bacterial biofilms in food processing equipment are directly related to human life safety and health. Therefore, it is of great strategic significance to study new food sterilization technology. An acidic electrolyzed water (AEW) disinfectant is an electrochemical sterilization technology which has the characteristics of wide adaptability, high efficiency, and environmental friendliness. However, since the sterilization efficiency of AEW for biofilms is not ideal, it is necessary to increase the available chlorine content (ACC) in AEW. A feasible method to increase the ACC is by increasing the chlorine evolution reaction (CER) selectivity of the electrode for AEW preparation. In this paper, the RuO₂@TiO₂ electrode was prepared by thermal decomposition combined with high-vacuum magnetron sputtering. Compared with the oxygen evolution reaction (OER) activity of an ordinary RuO₂ electrode, the OER activity of the RuO₂@TiO₂ electrode is significantly reduced. However, the CER activity of the RuO₂@TiO₂ electrode is close to the OER activity of RuO₂. The CER mechanism of the RuO₂@TiO₂ electrode is the second electron transfer, and the OER mechanism is the formation and transformation of OH_ads. The potential difference between the CER and OER of the RuO₂@TiO₂ electrode is 174 mV, which is 65 mV higher than that of the RuO₂ electrode, so the selectivity of the CER of the RuO₂@TiO₂ electrode is remarkably improved. During the preparation of AEW, the ACC obtained with the RuO₂@TiO₂ electrode is 1.7 times that obtained with the RuO₂ electrode. In the sterilization experiments on Escherichia coli and Bacillus subtilis biofilms, the logarithmic killing values of AEW prepared the by RuO₂@TiO₂ electrode are higher than those of AEW prepared by the RuO₂ electrode.