The impact of resistant starch on characteristics of gluten-free dough and bread

Study on the Effect of Sorghum Flour Particle Size on the Storage Quality of Leavened Pancakes

Pancakes prepared with sorghum flour possess a high nutritional value, yet their quality is unstable and prone to degradation during storage. This instability can be attributed to the particle size of coarse cereal powder, which significantly influences the quality of flour products during storage. In this study, changes in the quality of these pancakes, prepared with varying particle sizes of sorghum flour, were meticulously analyzed during cold storage using advanced instruments such as a texture analyzer, nuclear magnetic resonance spectrometer, differential scanning calorimeter, X-ray diffractometer, and Fourier transform infrared spectrometer. Findings revealed that the hardness of leavened pancakes significantly increased over time. After a refrigeration period of 7 days, the hardness of wheat flour leavened pancakes increased by 56.60%. However, with a decrease in the particle size of sorghum flour, the increase in hardness diminished, thereby delaying the aging process of the pancakes. As the storage duration was extended, moisture migration within the pancakes occurred, and the sorghum flour pancakes with a smaller particle size exhibited a reduced moisture change rate, indicating an enhanced water holding capacity. In comparison to their wheat flour counterparts, sorghum flour leavened pancakes exhibited a substantial reduction in retrogradation enthalpy and crystallinity. The inclusion of sorghum flour effectively inhibited amylopectin recrystallization, thus slowing down the aging process of the pancakes. This inhibitory effect was more evident with decreasing sorghum flour particle sizes. Fourier transform infrared data indicated no significant alterations in absorption peaks across various wavelengths during cold storage. Although starch short-range orderliness increased with storage time, the use of sorghum flour with smaller particles reduced the degree of short-range orderliness in starch molecules throughout the cold storage period. Sorghum flour with a smaller particle size can inhibit water migration and amylopectin recrystallization, which subsequently delays pancake aging and enhances its quality stability during storage.

Rheological Characteristics of Wheat Dough Containing Powdered Hazelnuts or Walnuts Oil Cakes

This study assessed edible oil industry byproducts, oil cakes (OC) based on hazelnuts and walnuts (HOC, WOC), to replace wheat flour dough (WD) based on farinograph and extensograph parameters and rheological measurements. The research hypothesis of this work is that replacing part of wheat flour with ground nut oil cakes modifies the rheological characteristics of the dough. WF was replaced at the level of 5%, 10% and 15%. It was shown that use of OC in flour mixtures at various levels significantly influenced the rheological properties of the dough. The water absorption of wheat flour and oil cake mixtures was higher than that of the control sample, and the average value of this indicator was 53.4%. The control sample had the lowest dough development time (DDT), and the presence of HOC or WOC in the system resulted in a significant increase in this parameter (p < 0.05). The average DDT of WDHOC cakes was 4.7 min and was lower compared to WDWOC which was 5.9 min. The WDWOC10% and WDWOC15% samples were characterized by the highest dough stability value and the lowest degree of softening (p < 0.05). The presence of OC in the flour mixtures increased the values of the storage and loss moduli, which was reflected in the K' and K″ values. The values of these parameters also increased as the level of OC addition increased. WDHOC doughs were characterized by higher values of the K' and K″ parameters compared to WDWOC. The results of the creep and recovery test showed that the dough with the addition of nut OC was less susceptible to deformation compared to the control dough (p < 0.05). The resistance to deformation increased with the increasing share of HOC or WOC in the mixtures. The average value of viscoelastic compliance (J1) of this parameter for WDHOC dough was on average 1.8 × 10-4 Pa-1, and for WDWOC 2.0 × 10-4 Pa-1. Nut oil cakes are an interesting technological addition to the dough. Their use may have a positive impact on the characteristics of the finished product and expand their application possibilities in the food industry. This is because the dough with the addition of nut cakes was more stiff and less flexible and susceptible to deformation.

Characterization of Lactic Acid Bacteria and Yeast from Grains as Starter Cultures for Gluten-Free Sourdough

With the increasing number of people affected by gluten consumption-related diseases, adhering to a gluten-free (GF) diet is the most effective preventive measure. Herein, we aimed to isolate and characterize the functional properties of autochthonous lactic acid bacteria (LAB) and yeast from various GF sourdoughs to determine their suitability in starter cultures for sourdough preparation. Three LAB, Weissella confusa BAQ2, Lactobacillus brevis AQ2, Leuconostoc citreum YC2, and Saccharomyces cerevisiae BW1, were identified. The isolated LAB exhibited greater TTA, faster acidification rates, and higher acid tolerance than commercial LAB. W. confusa BAQ2 exhibited the highest EPS production, W. confusa BAQ2 and L. brevis AQ2 showed high maltose utilization, and S. cerevisiae BW1 exhibited the highest CO2 production rate. Accordingly, all four microbial strains were mixed for the starter culture. The sourdough prepared with starter cultures exhibited differences in gas production depending on fermentation time, which influenced the volume of GF bread dough. GF bread prepared with fermented sourdough exhibited a 16% higher specific volume and enhanced crumb firmness and elasticity than that prepared using non-fermented sourdough. Thus, autochthonous LAB strains isolated from various GF sourdoughs can be used together to improve the quality of sourdough bread, demonstrating their potential for use in starter cultures for GF sourdough production.

High Protein Yangyu jiaotuan (): In Vitro Oral-Gastro-Small Intestinal Starch Digestion and Some Physico-Chemical, Textural, Microstructural, and Rheological Properties

Biomimetic foods are expected to have potential health benefits for the management and prevention of chronic diseases, such as diabetes and cardiovascular disease. In the current research, two commercially available and affordable plant proteins (soy protein isolate-SPI and pea protein isolate-PPI) at two levels (5%, 10%) were added to the Yangyu jiaotuan with the objective of developing a product with reduced glycaemic properties and high protein content while maintaining its original taste and texture. The results showed that several important textural properties such as hardness and chewiness did not change significantly during the refrigerated storage. The storage modulus G' increased with refrigerated storage time for different samples, but there were significant differences among the five samples (with and without protein addition) with respect to frequency dependence during rheological measurements. The in vitro starch digestion experiments showed that the starch hydrolysis of Yangyu jiaotuan decreased considerably (by up to 42.08%) with the increase in PPI content and during refrigerated storage due to starch retrogradation. Protein has protected the microstructure and there was less damage when compared to samples without protein. The bimodal peaks of the particle size distribution curves showed that the newly developed Yangyu jiaotuan contains two different sizes of particles; the smaller particles (~30 μm) corresponded to PPI and starch granules, while the larger particles corresponded to the fragments of the gel network of the starch matrix. Based on the above results, Yangyu jiaotuan mixed with pea protein is a convenient potato staple food product, which complies with the biomimetic potato food very well.

Retrogradation behavior of starch dough prepared from damaged cassava starch and its application in functional gluten-free noodles

A novel starch-based model dough used to exploit staple foods was demonstrated to be feasible, which was based on damaged cassava starch (DCS) obtained by mechanical activation (MA). This study focused on the retrogradation behavior of starch dough and the feasibility of its application in functional gluten-free noodles. Starch retrogradation behavior was investigated by low field-nuclear magnetic resonance (LF-NMR), X-ray diffraction (XRD), scanning electron microscope (SEM), texture profile and resistant starch (RS) content analysis. During starch retrogradation, water migration, starch recrystallization and microstructure changes were observed. Short-term retrogradation could significantly alter the texture properties of starch dough, and long-term retrogradation promoted the formation of RS. The damage level influenced starch retrogradation, and damaged starch with the increasing damage level was beneficial to facilitate the starch retrogradation. Gluten-free noodles made from the retrograded starch had acceptable sensory quality, with darker color and better viscoelasticity than Udon noodles. This work provides a novel strategy for the proper utilization of starch retrogradation for the development of functional foods.

Comparison of the Rheological Behavior of Fortified Rye-Wheat Dough with Buckwheat, Beetroot and Flax Fiber Powders and Their Effect on the Final Product

This study was focused on the replacement of the part of the flour (10% w/w) in rye-wheat bread with three different botanical origin powders with a high dietary fiber content (buckwheat hulls, beetroot and flax powder). The dough was based on rye-wheat flour without and with the addition of fiber powders with different botanical origins and was tested, and the quality of the finished baked products made from those doughs were assessed. In order to characterize the flour mixtures, their basic parameters were determined, and their pasting characteristic was performed. The dough parameters were described by the Burger rheological model and also the creep and recovery test. On the other hand, in bread, the basic parameters of baking, crumb and crust color parameters were determined, and an analysis of the crumb texture was carried out. Additionally, a sensory analysis of the finished products was carried out. The applied fiber additives influenced the pasting characteristics of the tested rye-wheat flour and were influenced by the dough rheological properties. It was found that used fiber powders changed the quality parameters of the final products. Despite this, using fiber at the amount of 10% as a flour substitute allowed us to obtain bread of a similar quality to the control sample.

Nutritional Profile of Commercialized Plant-Based Meat: An Integrative Review with a Systematic Approach

Given the high cost of production of animal-based meats and the increase in the number of adepts of meatless diets, the need for plant-based meat substitutes is growing. In this prosperously growing market, there is a lack of knowledge about the nutritional value of these meat substitutes and their ingredients. This study aims to review the nutritional composition and ingredients of meat substitutes commercialized worldwide. An integrative review was performed with a systematic literature search in PubMed, EMBASE, Scopus, Science Direct, Web of Science, and 11 studies were selected to compose the sample of this review. Data on meat substitutes' nutritional composition and ingredients from different categories were collected and analyzed. The results showed that meat substitutes commonly present lower energy values and higher amounts of carbohydrates and dietary fiber. Protein values varied according to the meat substitute category, with some showing a higher concentration than others, more specifically in substitutes for bovine meat. Higher values were found in the Pieces category and lower in Seafood substitutes. Unlike animal meat, vegan meat has a proportion of carbohydrates higher than protein in most samples, except for chicken substitutes. Meat substitutes presented similar total and saturated fat content compared to their animal-based counterparts. Higher amounts of fat were found in the "Various" category and lower in "Pieces". Ingredients such as soy, pea, and wheat were the primary protein sources in meat substitutes, and vegetable oils were their primary fat source. Methylcellulose, various gums, and flavorings were the most used food additives. In general, meat substitutes presented high concentrations of sodium, possibly collaborating with an excessive sodium intake, highlighting the need for developing sodium-reduced or sodium-free alternatives. Most of the included samples did not describe the concentration of iron, zinc, and vitamin B12. Further studies are needed to develop meat substitutes with better nutritional composition, fulfilling the need for equivalent substitutes for animal-based meat.

The Possibility of Replacing Wet-Milling with Dry-Milling in the Production of Waxy Rice Flour for the Application in Waxy Rice Ball

Due to the large consumption and discharge of water in wet milling, dry-milling is an alternative to produce waxy rice flour. The physical properties and sensory characteristics for preparing waxy rice balls in dry-milled waxy rice flour were compared in this study. The results showed that the damaged starch content increased significantly with the particle size of dry-milled flour, which decreased from 160 to 30 μm. The reduction in particle size increased the pasting viscosity of waxy rice flour, which further improved the stretch ability of dough and increased the viscoelasticity of the rice ball. The increase in damaged starch content directly led to a significant increase in the solubility of dry-milled flour, thereby increasing the freeze cracking rate of the rice ball and reducing its transparency, resulting in a decline in quality. In comparison with wet-milled waxy rice balls, dry-milled waxy rice balls made from rice flour in the range of 40 μm to 60 μm particle size had a similar texture and taste to that of wet-milled ones, moderate freeze cracking rate and better storage stability, as well as a stronger aroma of waxy rice that the consumer favored. GC-MS analysis showed that the content of key aroma compounds, such as grassy and fruity, noted nonanal in dry-milled flour, was 15-30% higher than that in the wet-milled depending on the difference of waxy rice variety. In conclusion, dry-milled waxy rice flour with a particle size in the range of 40 μm to 60 μm could be a candidate to replace wet-milled flour in the preparation of a waxy rice ball.

The Influence of Prebiotics on Wheat Flour, Dough, and Bread Properties; Resistant Starch, Polydextrose, and Inulin

The addition of prebiotics to bread is one of the most important ways to improve its techno-functional properties. In this study, the effects of resistant starch, polydextrose, and inulin on wheat flour, dough, and bread properties were investigated. The farinography results showed that resistant starch significantly increased the development time (2:18) via a boosting effect; however, polydextrose (1:48) and inulin (1:36) weakened the dough (p < 0.05). Inulin, polydextrose, and resistant starch had the greatest effect on reducing water absorption (40, 43.2, and 48.9), respectively, (p < 0.05). According to extensography data, the addition of inulin produced the best result in baking compared to other polysaccharides. In terms of baked breads, the samples containing resistant starch had high moisture content that could be due to starch gelatinization and moisture-retention, which delays the staling process of the bread. Inulin, polydextrose, and resistant starch prebiotic ingredients affected the rheological properties of the dough, overall bread quality and organoleptic characteristics; however, resistant starch was the best prebiotic used in this study.

Gluten-free bakery products: Ingredients and processes

There is an increasing demand for gluten-free products around the world because certain groups of people, which have increased in the last decades, need to eliminate gluten from their diet. A growing number of people consider gluten-free products to be healthier. However, making gluten-free products such as bread is a technological challenge due to the important role of the gluten network in their development. However, other products, such as cakes and cookies usually made with wheat flour, can easily be made with gluten-free starches or flours since gluten does not play an essential role in their production. To replace wheat flour in these elaborations it is necessary to resort to gluten-free starches and/or flours and to gluten substitutes. Additionally, it can be convenient to incorporate other ingredients such as proteins, fibers, sugars or oils, as well as to modify their quantities in wheat flour formulations. Regarding gluten-free flours, it will also be necessary to know the parameters that influence their functionality in order to obtain regular products. These problems have originated a lower availability of gluten-free products which have a worse texture and are less tasty and more expensive than their homologues with gluten. These problems have been partially solved thanks to research on these types of products, their ingredients and their production methods. In recent years, studies about the nutritional improvement of these products have increased. This chapter delves into the main ingredients used in the production of gluten-free products, the processes for making gluten-free breads, cakes and cookies, and the nutritional quality of these products.

Amorphophallus konjac: Sensory Profile of This Novel Alternative Flour on Gluten-Free Bread

This study aimed to evaluate the sensory profile of gluten-free bread with Amorphophallus konjac (AK) flour in different concentrations. This experimental study is divided into three steps: preparation of the gluten-free bread formulations, sensory analysis, and statistical analysis. The addition of Konjac flour in a gluten-free bread formulation was tested in different proportions, 12.5%, 25%, 37.5%, and 50% of the flour content. The checking all-that-apply (CATA) was conducted with 110 panelists; among these, 43 were consumers of gluten-free bread. Sensory analysis was conducted using a 9-point hedonic scale for color, aroma, texture, flavor, appearance, and overall acceptability. The AK flour influenced the sensory characteristics of gluten-free bread. Bread with characteristics closer to those found in bread with gluten was the one with 12.5% of konjac flour for both the acceptability analysis as the attributes raised through a detailed CATA map. The control sample is located next to features like dry appearance, dry texture and grainy, dark color, and salty. Therefore, 12.5% AK gluten-free bread is closer to the characteristics of the control sample, such as light crust color, light crumb color, soft and moist texture, cohesion, and brightness. The bread with the highest percentage of overall consumer acceptance was 12.5% konjac with 93% and 96% acceptance among consumers and non-consumers of gluten-free bread, respectively.

Dietary fiber in bakery products: Source, processing, and function

Bakery products are prevalently consumed foods in the world, and they have been regarded as convenient dietary vehicles for delivering nutritive ingredients into people's diet, of which, dietary fiber (DF) is one of the most popular items. The food industry attempts to produce fiber-enriched bakery products with both increasing nutritional value and appealing palatability. As many new sources of DFs become available, and consumers are moving towards healthier diets, studies of using these DFs as functional ingredients in baked goods are becoming vast. Besides, the nutrition value of DF is commonly accepted, and many investigations have also revealed the health benefits of fiber-enriched bakery products. Thus, this chapter presents an overview of (1) trends in supplementation of DF from various sources, (2) impact of DF on dough processing, quality and physiological functionality of bakery products, and (3) technologies used to improve the compatibility of DF in bakery products.

Rheological Properties of Corn Starch Gels With the Addition of Hydroxypropyl Methylcellulose of Different Viscosities

The objective of this study is to determine the effect of the addition of hydroxypropyl methylcellulose (HPMC) (from 0.5 to 2.0% w/w, starch basis) with three different viscosities (40–60, 80–120, and 2,600–5,600 mPa⋅s) to corn starch (30% w/w, total basis) gels. Average viscosimetric molecular weights (M_v) of tested HPMC were determined (from 27.2 × 10³ to 82.7 × 10³ g/mol). Water retention capacity of HPMC varied linearly with M_v. The formation and curation of gels were monitored by rheology employing consecutive steps such as heating ramp (25–90°C), time sweep (90°C), cooling ramp (90–25°C), time sweep (25°C), and frequency sweep. Additionally, creep-recovery tests were performed. HPMC above 1.5% w/w delayed the range of gelatinization temperature of starch up to 2°C. Viscoelasticity and stiffness of corn starch gels with HPMC depend on both the amount of polymer added and M_v of the HPMC. Finally, to achieve corn gels with mimetic viscoelastic properties to wheat gel (with constant total solids), HPMC with relatively low viscosity (low M_v) is necessary to be added at certain content.

Effect of Resistant Starch Sources on the Physical Properties of Dough and on the Eating Quality and Glycemic Index of Salted Noodles

The aim of this study was to evaluate the characteristics and eating quality of salted noodles that are incorporated with different formulations of flour. Up to 20% of wheat flour was substituted by composite flours of highly resistant starches, including heat moisture treatment corn starch (HMT-CS), high-amylose corn starch (Hylon VII), and green banana flour (GBF). The physical properties of dough, in conjunction with the eating quality and estimated glycemic index (EGI) of cooked salted noodles, were investigated in this study. The results concluded that the incorporation of GBF, HMT, and Hylon VII not only affected the water absorption and mixing tolerance of the dough, but also the maximum resistance to extension and extensibility in terms of the extensographic properties. Meanwhile, GBF, HMT, and Hylon VII incorporation significantly increased the resistant starch content and decreased the fat content of the noodle samples. The textural profile analyses of cooked salted noodles indicated that hardness, gumminess, chewiness, and shearing force increased; nevertheless, springiness declined with the increase in the proportion of flours from 10 to 20%. The sensory evaluation detected that wheat flour composited with 10% GBF and HMT flours could produce acceptable quality noodles as compared with normal typical control noodles. In the meantime, salted noodles incorporated with GBF, HMT-CS, and Hylon VII flour decreased the estimated glycemic index (EGI) dramatically. The result of this study concluded that incorporation of various sources of resistant starch flour could develop a low-GI noodle with good acceptability that may contribute to gastrointestinal health.

Gluten proteins: Enzymatic modification, functional and therapeutic properties

Glutens are potential proteins with multifunctional therapeutic effects. Their covalence network structures with and without protease inhibitors are expected to enhance or to serve further properties and further technological points such as increased bioactive surfaces, gelatinization, gelation and pasting properties. The depletion of the allergic peptide sequences of gluten proteins comprising sometimes protease inhibitors are valid via the enzymatic ingestion using proteolytic enzymes that might enhance these functional and technological processes by producing active peptides having osmoregulation and regular glass transitions, surface activity for coating and encapsulation properties. In addition to further therapeutic functions such as immunoregulatory, antithrombin and opioidal activities, particularly in eradicating most of the free radicals, suppressing diabetes Mellitus II complications and inhibiting angiotensin converting enzyme cardiovascular growth diseases.

Variation of resistant starch content in different processing types and their starch granules properties in rice

Ninety-nine lines from recombinant inbred lines were selected to investigate the effects of starch synthesis-related genes on resistant starch (RS) content in different proceeding types. RS in raw milled rice (RSm), hot cooked rice (RSc), and retrogradation rice (RSr) showed a wide variation among the lines, especially RSm arrived at 10.61%. Divergent variability of RSm, RSc and RSr indicated that there were different regulation mechanisms for them. Waxy wildtype allele (Wx^a) could elevate RSm, RSc and RSr, but Soluble starch synthase IIa (SSIIa) only played a vital role in regulating RSm. Wx^a-indica SSIIa could increase RSm, and Wx^a-japonica SSIIa (SSIIaj) could elevate RSc and RSr. The mean diameter of Wx^a-SSIIaj was significantly bigger than others. The bigger starch granules, the higher RSc and RSr. Starch granules morphology with high-RSm would have a higher percentage in polyhedral and angular shape. The results provide new information for rice breeding with high-RS content.

Delving into the Role of Dietary Fiber in Gluten-Free Bread Formulations: Integrating Fundamental Rheological, Technological, Sensory, and Nutritional Aspects

The evidenced relevance of dietary fibers (DF) as functional ingredients shifted the research focus towards their incorporation into gluten-free (GF) bread, aiming to attain the DF contents required for the manifestation of health benefits. Numerous studies addressing the inclusion of DF from diverse sources rendered useful information regarding the role of DF in GF batter’s rheological properties, as well as the end product’s technological and nutritional qualities. The presented comprehensive review aspires to provide insight into the changes in fiber-enriched GF batter’s fundamental rheological properties, and technological, sensory, and nutritional GF bread quality from the insoluble and soluble DF (IDF and SDF) perspective. Different mechanisms for understanding IDF and SDF action on GF batter and bread were discussed. In general, IDF and SDF can enhance, but also diminish, the properties of GF batter and bread, depending on their addition level and the presence of available water in the GF system. However, it was seen that SDF addition provides a more homogenous GF batter structure, leading to bread with higher volumes and softer crumb, compared to IDF. The sensory properties of fiber-enriched GF breads were acceptable in most cases when the inclusion level was up to 7 g/100 g, regardless of the fiber type, enabling the labeling of the bread as a source of fiber.

Impact of Gluten-Free Sorghum Bread Genotypes on Glycemic and Antioxidant Responses in Healthy Adults

Sorghum is used to provide good quality gluten-free products due to phytochemicals and low glycemic index (GI). This study aimed to determine the chemical composition, the antioxidant activity and capacity, and the glycemic and insulinemic responses of gluten-free (GF) sorghum bread. GF bread samples were produced with three different sorghum genotypes. The samples were analyzed for chemical composition, resistant starch and dietary fiber content; antioxidant activity by ORAC; antioxidant capacity by FRAP; GI; and insulinemic responses. This double-blind, crossover, randomized clinical trial was conducted with 10 healthy men aged 28.0 ± 4.9 years (77.6 ± 11.7 kg and 24.2 ± 2.3 kg/m2). All sorghum bread showed significantly more fiber than rice bread (control). Brown sorghum bread was classified as low GI, bronze and white as medium GI, and control as high GI. Brown sorghum bread presented a low carbohydrate content, a significant amount of fiber, and a significantly lower 3 h AUC glucose response than those of the control, aside from the highest antioxidant activity value (p ≤ 0.001). Therefore, brown sorghum was superior to other genotypes analyzed in this study, and its production should be encouraged to provide gluten-free products with a better nutritional profile. More research is required to explore the effects of different sorghum genotypes in food products on human health.

Nutritional, physical and sensory characteristics of gluten-free biscuits incorporated with a novel resistant starch ingredient

Gluten-free (GF) biscuits were prepared by replacing part of a GF flour mix (GFM) with 0, 15, 30 and 45 g/100 g (total flour) with a novel resistant starch-rich ingredient obtained from annealed white sorghum starch (RSWS). The chemical composition, physical characteristics, in vitro starch digestion and sensory evaluation of biscuits were considered. The chemical composition of samples was influenced by the addition of the RSWS. The highest total dietary fibre and RS contents (p < 0.05) were measured in 45-RSWS biscuits. The starch hydrolysis index values decreased when the level of RSWS increased in the composite. With regard to quality parameters, the use of RSWS influenced the hardness of the biscuits, and the highest value obtained for 45-RSWS. Some of the selected sensory attributes, along with the overall acceptability score, were negatively influenced by the RSWS addition, even if all remained above the limit of acceptability. The use of RSWS in GF biscuit formulation can contribute towards the creation of food products likely having slowly digestible starch properties, and this can be achieved without drastically compromising on the quality and sensory attributes.

Impact of wheat bran micronization on dough properties and bread quality: Part I - Bran functionality and dough properties

This study aimed to investigate the effect of wheat bran micronization on its functionality including physicochemical and antioxidant properties, and dough properties. Coarse bran (D₅₀ = 362.3 ± 20.5 μm) was superfine ground to medium (D₅₀ = 60.4 ± 10.1 μm) and superfine (D₅₀ = 11.3 ± 2.6 μm) bran, accompanied with increasing specific surface area and breakdown of aleurone layers. Bran micronization increased its soluble dietary fibre content, ferulic acid liberation, and antioxidant properties including total polyphenol content, ABTS•+ and DPPH• scavenging activities, while decreased its water retention capacity and insoluble dietary fibre content. Moreover, bran micronization impacted dough rheological properties. The dough with superfine bran had higher water absorption and gelatinization temperature, peak viscosity, final viscosity and setback value, lower stability time, resistance to extension, and extensibility than the dough with coarse bran. This dough furthermore exhibited more solid-like properties characterized by decreased loss moduli and frequency dependence (n').

Effect of Citrus Fiber on the Rheological Properties of Dough and Quality of the Gluten-Free Bread

The aim of the study was to evaluate the use of citrus fiber for the nutritional enrichment and technological improvement of gluten-free bread. A partial replacement of starch in bread formulation was analyzed in terms of the dough’s rheological properties and selected quality parameters of the bread. The results allowed to conclude that the presence of citrus fiber modifies the rheological properties of the dough, causing an increase in storage modulus (G′) and loss modulus (G″) values, as well as zero shear viscosity, accompanied with a decrease in instantaneous compliance (J0) and viscoelastic compliance (J1) to the applied stress, which reflects dough strengthening caused by significantly greater water binding and swelling properties characteristic of this ingredient. The introduction of the citrus fiber to bread formulations caused a significant decrease in bread volume and structure changes in crumb visible in the larger porosity and average pore size. The presence of citrus fiber affected texture, decreasing crumb hardness, springiness, cohesiveness and chewiness in comparison to the control. It could also be observed that the use of citrus fiber results in limited crumb hardening during storage, which indicates that this component could be an effective factor retarding the staling of the gluten-free bread based on starch and hydrocolloids.

Chemical Composition and Glycemic Index of Gluten-Free Bread Commercialized in Brazil

Nowadays, the world is experiencing an increased demand for gluten-free products associated with the high prevalence of gluten-related disorders (GRD). As this market thrives, bread stands out as the most demanded and consumed product, highlighting the need to evaluate its nutritional quality. In this sense, this cross-sectional study aimed to assess the ingredients, chemical composition, and glycemic index of gluten-free bread (GFB) commercialized nationwide in Brazil. The labels were analyzed according to their ingredients and composition. In addition, centesimal composition analysis (moisture, carbohydrates, protein, ash, lipid, and fiber) was performed using the official methods, as well as the in vivo glycemic index. Significant differences between manufacturing lots of each brand and between different gluten-free bread samples were found. There is a mismatch from what is stipulated by the Brazilian legislation between analytical data and the data described on sample labels. Samples showed predominantly refined starch and high glycemic index profile. Most samples (75%, n = 6) of the non-whole gluten-free bread (n = 8) presented high glycemic index (GI). From four whole food/multigrain gluten-free bread samples, three of them (75%) presented medium GI. However, two samples presented GI near the value to be considered high. The results suggest a lack of production control, impairing the gluten-free nutritional label as a reliable information source and tool for dietary control. Therefore, it is necessary to standardize the process of gluten-free bread production and labeling, as well as to improve the nutritional characteristics of these products, aiming the give accurate information to consumers and provide a healthier product beyond the sensory characteristics.

Pasting, rheological, and dough mixing behavior of rice flour as affected by the addition of native and partially hydrolyzed β-glucan concentrate

This study was aimed at evaluating the potential of barley β-glucan concentrates (native and partially hydrolyzed) in modifying the techno-functionality of rice flour dough. β-Glucan concentrate was partially hydrolyzed to obtain a low molecular weight polymer and their influence on the pasting, rheological, and thermal properties of rice dough were assessed. Hydration, thermal, and pasting properties were significantly modified with the added β-glucans. The rice dough supplemented with β-glucan concentrates showed improved viscoelastic and creep behavior and the effectiveness of β-glucans in imparting strength to rice dough depended on its molecular weight. Hydrolyzed β-glucan concentrates having low molecular weight increased dough elasticity to the greater extent in comparison to native β-glucan concentrates. The micrographs of supplemented dough showed a strong and dense network indicating improved structure and strength.

The Effect of the Addition of Dietary Fibers from Apple and Oat on the Rheological and Textural Properties of Waxy Potato Starch

The aim of this paper was to investigate the influence of dietary fibers from oat (OF) and apple (AF) (concentration 0.2%) on the pasting properties, rheological (including thixotropic and anti-thixotropic) and textural properties of 3% and 4% (w/w) waxy potato starch pastes. The samples were characterized by their pasting characteristics, the hysteresis loop test, and textural properties measured during storage. It was found that the breakdown viscosity values of the blends, including oat fibers, were lower than those of the others (waxy potato starch (WPS), WPS-AF), which suggests that these samples would have higher resistance to retrogradation and therefore would form a more stable paste. The pattern of flow curves showed that the investigated waxy potato starch and starch-fiber pastes were non-Newtonian fluids, thinned by shear. Areas of the hysteresis loops indicated that pastes with fibers had anti-thixotropic or mixed thixotropic/anti-thixotropic character. The greatest areas of the anti-thixotropy hysteresis loops were characteristic for WPS, while its mixtures with AF and OF caused a decrease in the value of these areas. It can indicate that starch-fiber blends were more stable during shearing. Fiber-type and starch concentration strongly affected the textural parameters of the starch-fiber gels.

Effect of the viscoelastic properties of modified starch as a wall material on the surface morphology of microcapsules

BACKGROUND

Since microcapsule technology has a good protective effect on unstable bioactive substances, many studies have focused on exploring the best technical conditions for forming microcapsules. Modified starch is a microcapsule wall material with good emulsifying and film-forming properties. The objective of this work was to study the creep-recovery behavior of modified starch pastes for various creep time, shear stress and temperature. Furthermore, the effect of creep-recovery behavior on the morphology of microcapsules made of the modified starch was investigated.

RESULTS

The maximum creep compliance (J_max ), instantaneous compliance (J₀ ) and retardation compliance (J₁ ) of modified starch increased proportionally with increasing creep time and shear stress but decreased with increasing temperature. The Newtonian viscosity (η₀ ) increased with increasing creep time and temperature but decreased with increasing shear stress. The recovery rate of the modified starch pastes varied from 0.92 to 33.68% in the creep-recovery test conditions. Creep-recovery data could be well explained by a four-parameter Burgers model (R²  > 0.918).

CONCLUSIONS

Modified starch pastes exhibited time-, stress- and temperature-dependent creep-recovery behavior. The J_max values of modified starch pastes were low(<0.20 Pa^-1 ) and the η₀ values high (>3.5 × 10³  Pa s) for all test conditions. The results revealed the modified starch pastes had a good rigid network structure to resist deformation but recovery was difficult once deformation occurred. Microcapsules produced using the modified starch exhibited a small deformation with regular spheres and some dents, consistent with the results of creep-recovery tests. © 2019 Society of Chemical Industry.

Structural Basis of Resistant Starch (RS) in Bread: Natural and Commercial Alternatives

Bread is categorized as having a high amount of rapidly digested starch that may result in a rapid increase in postprandial blood glucose and, therefore, poor health outcomes. This is mostly the result of the complete gelatinization that starch undergoes during baking. The inclusion of resistant starch (RS) ingredients in bread formulas is gaining prominence, especially with the current positive health outcomes attributed to RS and the apparition of novel RS ingredients in the market. However, many RS ingredients contain RS structures that do not resist baking and, therefore, are not suitable to result in a meaningful RS increase in the final product. In this review, the structural factors for the resistance to digestion and hydrothermal processing of RS ingredients are reviewed, and the definition of each RS subtype is expanded to account for novel non-digestible structures recently reported. Moreover, the current in vitro digestion methods used to measure RS content are critically discussed with a view of highlighting the importance of having a harmonized method to determine the optimum RS type and inclusion levels for bread-making.

Relation between structural, mechanical and sensory properties of gluten-free bread as affected by modified dietary fibers

Gluten-free bread was fortified with modified dietary fibers (wheat bran, resistant starch and inulin) and their effects on water mobility, friction coefficient, thermal behavior, crystalline pattern and textural properties were evaluated. Moreover, time-intensity evaluation was used to study temporal dynamics of sensory attributes of fortified-breads. Dietary fibers increased gelatinization temperature while decreasing gelatinization enthalpy, more notably when inulin was used. X-ray diffraction patterns of bread showed the appearance of new peaks after addition of resistant starch and wheat bran, coinciding with an increase in crumb hardness. In contrast, inulin considerably decreased starch crystallinity in the bread, resulting in a softer crumb. Faster decay and shifting of protons to shorter times were found with incorporation of dietary fibers. Friction coefficient determined by tribology measurement was higher in the breads containing resistant starch and wheat bran compared to other samples. Pearson's correlation analysis indicated the sensory attributes of firmness, chewiness and dryness were positively correlated with instrumental findings. Time-intensity evaluation revealed inulin-fortified bread had the lowest firmness and chewiness with less dryness, whereas resistant starch-fortified bread showed the highest intensity of these descriptors.