Colloidal complexation of zein hydrolysate with tannic acid: Constructing peptides-based nanoemulsions for alga oil delivery

Enhancing emulsification and gelation properties of porcine myofibrillar protein under low NaCl by lipoxygenase from volvaria volvacea

The objective of this research was to present an alternate approach for enhancing the emulsification and gelation properties of porcine MP under low NaCl conditions (0.1 M). This was achieved by utilizing lipoxygenase from Volvaria volvacea (vvLOX). Addition of vvLOX from 0 to 1000 U/mL, gradually decreased the protein particle size, polydispersity index, and zeta potential values at same time increased the emulsion activity and stability index of the MP emulsion. Additionally, the gel strength and water holding capability of the MP gel also increased. At a concentration of 0.1 M NaCl, the application of vvLOX treatment resulted in a compact gel matrix for the MP gel, as evidenced by measurements of dynamic viscoelasticity and microstructure. The mechanism of enhancing emulsification and gelation properties by vvLOX addition could attribute to decreasing the dispersion of particle sizes and increasing the repulsive forces between droplets.

Advanced characterization of fish skin gelatin-proanthocyanidins covalent and non-covalent composite emulsions for benzyl isothiocyanate delivery

This research endeavored to engineer robust delivery matrices for bioactives, specifically benzyl isothiocyanate (BITC), by harnessing the synergistic covalent and non-covalent interactions between fish skin gelatin (FSG) and proanthocyanidins (PC) to synthesize novel composite emulsions. The objective was to delineate the influence of these molecular interactions on the emulsion's structural integrity and stability, which are pivotal for the efficacious encapsulation and controlled release of BITC. Employing a suite of analytical techniques, including Fourier transform infrared spectroscopy (FTIR), fluorescence spectroscopy, and contact angle measurements, the study delineated the predominant molecular forces at play within the FSG-PC complex, identifying electrostatic and hydrophobic interactions as the cornerstones of this interaction. An assessment of the emulsions' physicochemical properties, encompassing chromaticity, antioxidant efficacy, microstructural attributes, particle dimensions, zeta potential, and BITC retention, was undertaken to discern the optimal encapsulation strategy. The data unequivocally indicated that emulsions enriched with 0.06 wt% PC, in non-covalent synergy with FSG, afforded the most pronounced stability and retention of BITC. This work paves the way for future studies and the translational application of FSG-PC composite emulsions in the realm of bioactive substance delivery, offering a promising avenue for innovation in pharmaceutical and nutraceutical formulations.

Recent advances in the plant protein-polyphenol interactions for the stabilization of emulsions

Proteins from plant sources including legumes, cereals and oilseeds are gaining attention due to their suitability for sustainable production, functionality, and positive consumer perception. On the other hand, polyphenols (PPs) are receiving considerable attention as natural ingredients in the human diet due to their potent antioxidant and anti-inflammatory properties. Recent studies indicate that the emulsifying properties of plant proteins (PLPs) can be improved after modification through covalent and/or non-covalent interactions with PPs due to the changes in the conformation and/or the surface chemistry of the proteins. Complexes formed between PLPs-PPs can serve as innovative ingredients for developing novel food products with modified textural properties. Also, Pickering emulsions, multiple emulsions, multilayer emulsions, nanoemulsions, and high internal phase emulsions can be stabilized by such systems to deliver bioactive compounds. This paper reviews the most recent research on the PLP-PP interactions and their role in the stabilization of various emulsion-based systems. A special emphasis is given to modifying the structure and functionality of PLPs and PPs. The challenges and opportunities of applying PLP-PP interactions in emulsion-based systems are also highlighted.

Soy protein-polyphenols conjugates interaction mechanism, characterization, techno-functional and biological properties: An updated review

Soy protein is a promising nutritional source with improved functionality and bioactivities due to conjugation with polyphenols (PP)-the conjugates between soy protein and PP held by covalent and noncovalent bonds. Different approaches, including thermodynamics, spectroscopy, and molecular docking simulations, can demonstrate the outcomes and mechanism of these conjugates. The soy protein, PP structure, matrix properties (temperature, pH), and interaction mechanism alter the ζ-potential, secondary structure, thermal stability, and surface hydrophobicity of proteins and also improve the techno-functional properties such as gelling ability, solubility, emulsifying, and foaming properties. Soy protein-PP conjugates also reveal enhanced in vitro digestibility, anti-allergic, antioxidant, anticancer, anti-inflammatory, and antimicrobial activities. Thus, these conjugates may be employed as edible film additives, antioxidant emulsifiers, hydrogels, and nanoparticles in the food industry. Future research is needed to specify the structure-function associations of soy protein-PP conjugates that may affect their functionality and application in the food industry.

Nanoencapsulation of vitamin D3 by ultrasonic pretreated zein hydrolysates: Stability improvement in food models

This work is aimed to assess the effect of ultrasonic pre-treatment on the enzymatic hydrolysis of zein and the nanoencapsulation of vitamin D3 (VitD3) by zein hydrolysates (ZH). The ultrasonic pre-treatment significantly increased the degree of hydrolysis by and the α-helix, β-sheet, β-turns contents, and random coils were enhanced by ultrasonic pre-treatment. VitD3 was successfully encapsulated by the developed ZH nanoparticles (NPs), with an encapsulation efficiency of 95.23 ± 1.78 %. The surface charge and particle size of the nanoparticles (NPs) were -5.45 ± 1.76 mV and 39.43 ± 7.96 nm, respectively. The detailed morphology study of NPs showed a regular spherical morphology, and the chemical structures of NPs were characterized by Fourier Transform Infrared Red spectroscopy. Additionally, the developed NPs were added to milk, which exhibited high stability after one month of storage. In conclusion, the VitD3-loaded ZHNPs had considerable potential for fortifying different foodstuffs.

Tuning the Interfacial Deformation of Gliadin-Flaxseed Gum Complex Particles for Improving the Foam Stability

Gliadin nanoparticle (GNP) is a promising foaming agent, but its application is hindered by the limited foam stability under low acidic conditions. Herein, we attempted to tune the foam stability of GNP by coating it with flaxseed gum (FG) and investigated the structure, interfacial behaviors, and foam functionality of gliadin-FG (GFG) particles at pH 4.5. Results showed that the formation of GFG complex particles was driven by an electrostatic interaction between positive charge patches on the surface of GNP (~17 mV) and negative charges in FG molecule (~-13 mV) at all tested ratios. The addition of appropriate amounts of FG (1:0.05) effectively improved the foam stability of GNP. This was because GFG with larger sizes and lower surface charge possessed higher rigidity after coating with FG. When they adsorbed at the air/water interface, their deformation process was slower than that of GNP, as indicated by interfacial dilatational rheology and cryo-SEM, and the covered particles seemed to be more closely distributed to form solid-like and dense interfacial films. Notably, the addition of FG at a higher ratio (1:0.3) promoted the foam stability of GNP by about five folds because the larger GFG with suitable flexibility and wettability could form a stiff interface layer with more significant elastic response, and the unabsorbed particles and FG could form a gel-like network structure in the continuous phase. These characteristics effectively prevented foam disproportionation and coalescence, as well as retard the drainage. Our findings demonstrate that coating GNPs with FG is an effective approach to improve their application in foamed foods.

A Review on the Driving Forces in the Formation of Bioactive Molecules-Loaded Prolamin-Based Particles

Prolamin-based particles loaded with bioactive molecules have attracted widespread attention from scientists due to their novel properties in chemistry, physics, and biology. In the self-assembly process of biopolymer-based nanocapsules, noncovalent interactions are the main driving forces for reducing bulk materials to the nanoscale and controlling the release of bioactive molecules. This article reviews the types of interaction forces, binding strength, binding active sites, molecular orientation, and binding affinity that affect the release profile of bioactive molecules during the preparation of protein stabilizer particles. Different preparation formulations, the use of different biopolymers, the inherent nature of the loaded bioactive molecules, and external factors (including pH, biopolymer concentration, temperature, salt, ultrasonication, and atmospheric cold plasma treatment) lead to different types and strengths of intra- and intermolecular interactions. Strategies, such as pH, ultrasonication, and atmospheric cold plasma, to change the protein conformation are key to improving the binding strength between proteins and bioactive substances or stabilizers. This review provides some guidance for scientists and technicians dedicated to improving loading efficiency, delaying release, enhancing colloidal stability, and exploring the binding behavior among proteins, stabilizers, and bioactive molecules.

Formation mechanism of off-flavor and the inhibition regulatory strategies in the algal oil-loaded emulsions-a review

Algal oil rich in docosahexaenoic acid is easily oxidized and degraded to produce volatile short-chain compounds, leading to the deterioration of product flavor. Currently, the emulsion delivery of algal oil provides a promising approach to minimize oxidative deterioration and conceal its off-flavor. However, algal oil emulsions would also experience unanticipated oxidation as a result of the large specific surface area between the aqueous phase and the oil phase. The current paper offers a mechanism overview behind off-flavor formation in algal oil emulsions and explores corresponding strategies for the inhibition regulation. Additionally, the paper delves into the factors influencing lipid oxidation and the perception of off-flavors in such emulsions. To mitigate the development of off-flavors in algal oil emulsions resulting from oxidation, it is crucial to decline the likelihood of lipid oxidation and proactively prevent the creation of off-flavors whenever possible. Minimizing the release of volatile off-flavor compounds that are inevitably generated is also considered effective for weakening off-flavor. Moreover, co-encapsulation with particular desirable aroma substances could improve the overall flavor characteristics of emulsions.

Simulating the behavior of antioxidant to explore the mechanisms of oxidative stability in Pickering emulsion

This study explores effective strategies for bolstering emulsion oxidative stability via optimized interfacial distribution of varying hydrophobicity antioxidants (gallic acid, propyl gallate, octyl gallate) in zein nanoparticle (ZP) stabilized Pickering emulsions. Experimental and simulation methods revealed that antioxidant (AO) with higher hydrophobicity or loaded into ZP demonstrated stronger hydrogen bonding and van der Waals interactions with ZP. This increased interfacial loading of antioxidants resulted in improved oxidative stability in Pickering emulsions. The flow, distribution and orientation of AO, as revealed by dissipative dynamics simulations, highlighted the role of hydrophobic interactions during initial AO migration, influenced by varied alkyl chain lengths. Subsequent interface rearrangements arose from conservative force interactions between the AO's phenol hydroxyl ends and ZP. These findings inform effective interfacial engineering to optimize antioxidant efficiency, guiding practical applications in emulsion systems for improved oxidative stability.

Recent Advances in Efficient Lutein-Loaded Zein-Based Solid Nano-Delivery Systems: Establishment, Structural Characterization, and Functional Properties

Plant proteins have gained significant attention over animal proteins due to their low carbon footprint, balanced nutrition, and high sustainability. These attributes make plant protein nanocarriers promising for applications in drug delivery, nutraceuticals, functional foods, and other areas. Zein, a major by-product of corn starch processing, is inexpensive and widely available. Its unique self-assembly characteristics have led to its extensive use in various food and drug systems. Zein's functional tunability allows for excellent performance in loading and transporting bioactive substances. Lutein offers numerous bioactive functions, such as antioxidant and vision protection, but suffers from poor chemical stability and low bioavailability. Nano-embedding technology can construct various zein-loaded lutein nanodelivery systems to address these issues. This review provides an overview of recent advances in the construction of zein-loaded lutein nanosystems. It discusses the fundamental properties of these systems; systematically introduces preparation techniques, structural characterization, and functional properties; and analyzes and predicts the target-controlled release and bioaccessibility of zein-loaded lutein nanosystems. The interactions and synergistic effects between Zein and lutein in the nanocomplexes are examined to elucidate the formation mechanism and conformational relationship of zein-lutein nanoparticles. The physical and chemical properties of Zein are closely related to the molecular structure. Zein and its modified products can encapsulate and protect lutein through various methods, creating more stable and efficient zein-loaded lutein nanosystems. Additionally, embedding lutein in Zein and its derivatives enhances lutein's digestive stability, solubility, antioxidant properties, and overall bioavailability.

Physicochemical stability of corn protein hydrolysate/tannic acid complex-based β-carotene nanoemulsion delivery system

Moderate non-covalent interaction of protein and polyphenols can improve the emulsifying property of protein itself. The corn protein hydrolysate (CPH) and tannic acid (TA) complex was successfully used to construct nanoemulsion for algal oil delivery. There has been no study on the feasibility of this nanoemulsion delivery system for other food functional components, for example, β-carotene (β-CE). CPH/TA complex-based nanoemulsion system for β-CE delivery was studied, focusing on the effect of β-CE content on the physicochemical stability of the nanoemulsions. The nanoemulsion delivery systems (dia. 150 nm) with low viscosity and good liquidity were easily fabricated by two-step emulsification. The nanoemulsions with high β-CE content (>71.5 μg/mL) significantly increased (p < .05) the emulsion droplet size. However, there was no significant (p > .05) effect of β-CE content on polydispersity index (PDI) and zeta potential of the nanoemulsions. The storage (30 days) experiment results demonstrated that the droplet size of the nanoemulsions with varying β-CE content increased slightly during storage. However, the PDI values showed a slightly decreasing trend. Zeta potentials of the nanoemulsions showed no noticeable change during storage. Moreover, after storage of 30 days, the retention ratios of β-CE were found to be up to 90%, which suggests an excellent protective effect for β-CE by the nanoemulsion systems. The CPH/TA complex stabilized nanoemulsions could aggregate in gastric condition, but the β-CE content did not have obvious effect on the digestive stability of the nanoemulsions. The CPH/TA complex could be employed as an emulsifier to construct a physicochemical stable nanoemulsion delivery system for lipophilic active components.

Formation mechanism of quinoa protein hydrolysate-EGCG complexes at different pH conditions and its effect on the protein hydrolysate-lipid co-oxidation in emulsions

This study aimed to investigate the interaction, structure, antioxidant, and emulsification properties of quinoa protein hydrolysate (QPH) complexes formed with (-)-epigallocatechin gallate (EGCG) at pH 3.0 and 7.0. Additionally, the effect of pH conditions and EGCG complexation on protein hydrolysate-lipid co-oxidation in QPH emulsions was explored. The results indicated that QPH primarily interacted with EGCG through hydrophobic interactions and hydrogen bonds. This interaction led to alterations in the secondary structure of QPH, as well as a decrease in surface hydrophobicity and free SH content. Notably, the binding affinity between QPH and EGCG was observed to be higher at pH 7.0 compared to pH 3.0. Consequently, QPH-EGCG complexes exhibited more significant enhancement in antioxidant and emulsification properties at pH 7.0 than pH 3.0. The pH level also influenced the droplet size, ζ-potential, and interfacial composition of emulsions formed by QPH and QPH-EGCG complexes. Compared to QPH stabilized emulsions, QPH-EGCG stabilized emulsions were more capable of mitigating destabilization during storage and displayed fewer lipid oxidation products, carbonyl generation, and sulfhydryl groups and fluorescence loss, which implied better oxidative stability of the emulsions. Furthermore, the QPH-EGCG complexes formed at pH 7.0 exhibited better inhibition of protein hydrolysate-lipid co-oxidation. Overall, these findings provide valuable insights into the potential application of QPH and its complexes with EGCG in food processing systems.

Nanoencapsulation and delivery of bioactive ingredients using zein nanocarriers: approaches, characterization, applications, and perspectives

Zein has garnered widespread attention as a versatile material for nanosized delivery systems due to its unique self-assembly properties, amphiphilicity, and biocompatibility characteristics. This review provides an overview of current approaches, characterizations, applications, and perspectives of nanoencapsulation and delivery of bioactive ingredients within zein-based nanocarriers. Various nanoencapsulation strategies for bioactive ingredients using various types of zein-based nanocarrier structures, including nanoparticles, nanofibers, nanoemulsions, and nanogels, are discussed in detail. Factors affecting the stability of zein nanocarriers and characterization methods of bioactive-loaded zein nanocarrier structures are highlighted. Additionally, current applications of zein nanocarriers loaded with bioactive ingredients are summarized. This review will serve as a guide for the selection of appropriate nanoencapsulation techniques within zein nanocarriers and a comprehensive understanding of zein-based nanocarriers for specific applications in the food, pharmaceutical, cosmetic, and agricultural industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01489-6.

Peptides as carriers of active ingredients: A review

Bioactive compounds are highly valuable in the fields of food and medicine, but their application is limited due to easy deterioration after oral or skin administration. In recent years, the use of peptides as delivery systems for bioactive compounds has been intensively researched because of their special physicochemical characteristics. Peptides can be assembled using various preparation methods and can form several composite materials such as hydrogels, micelles, emulsions and particles. The composite material properties are determined by peptides, bioactive compounds and the construction methods employed. Herein, this paper provides a comprehensive review of the peptides used for active ingredients delivery, fabrication methods for creating delivery systems, structures, targeting characteristics, functional activities and mechanism of delivery systems, as well as their absorption and metabolism, which provided theoretical basis and reference for further research and development of functional composites.

Structure relationship of non-covalent interactions between lotus seedpod oligomeric procyanidins and glycated casein hydrolysate during digestion

Procyanidin-amino acid interactions during transmembrane transport cause changes in the structural and physical properties of peptides, which limits further absorption of oligopeptide-advanced glycation end products (AGEs). In this study, glycated casein hydrolysates (GCSHs) were employed to investigate the structure and interaction mechanism of GCSH with lotus seedpod oligomeric procyanidin (LSOPC) complexes in an intestinal environment. LSOPC can interact with GCSH under certain conditions to form hydrogen bonds and hydrophobic interactions to form GCSH-LSOPC complexes. Results showed that procyanidin further leads to the transformation of a GCSH secondary structure and the increase of surface hydrophobicity (H0). The strongest non-covalent interaction between GCSH and (-)-epigallocatechin gallate (EGCG) was due to the polyhydroxy structure of EGCG. Binding site analysis showed that EGCG binds to the internal cavity of P1 to maintain the relative stability of the binding conformation. The antioxidant capacity of GCSH was remarkably elevated by GCSH-LSOPC. This study will provide a new reference for the accurate control of oligopeptide-AGEs absorption by LSOPC in vivo.

Influence of interfacial properties/structure on oxygen diffusion in oil-in-water emulsions

Oxygen diffusion played an important role in the lipid oxidation of food emulsions. In this study, a simple method was developed to quantitatively observe the oxygen diffusion in the oil-water biphasic system, and it was further applied to investigate the relationship between the oxygen diffusion and lipid oxidation in O/W emulsions. Various factors that related to the emulsion oxidation were considered, from their influence on the oxygen diffusion and lipid oxidation in the emulsions. Results showed that there was obvious correlation between the oxygen diffusion and lipid oxidation in O/W emulsions, which reveals the inhibition of oxygen diffusion could apparently slow down the lipid oxidation. Moreover, the changes of oil phase, water phase and interfacial layer of the emulsions, which were related to the oxygen diffusion, could improve the oxidative stability of the emulsions effectively. Our findings are helpful for deep understanding the mechanisms of the lipid oxidation in food emulsions.

Improving the biological activity, functional properties, and emulsion stability of soybean meal hydrolysate via covalent conjugation with polyphenol

The use of by-products as functional components in food production is gaining popularity. This study investigated the structure, biological activity, interaction force, and emulsion stability of soybean meal hydrolysate (SMHs) after covalent conjugation with proanthocyanidin (PC), epigallocatechin (EGCG), gallic acid (GA), and caffeic acid (CA). SDS-PAGE confirmed the formation of SMHs-polyphenol conjugates. Structural analysis indicates unfolding and disordered-structure formation. This transformation directly influenced the antioxidant activity and emulsification of SMHs. The antioxidant and emulsifying properties of all covalent complexes were superior to SMHs, in order of SMHs-PC, SMHs-EGCG, SMHs-GA, and SMHs-CA. Among, SMHs-PC conjugates displayed the highest antioxidant activity (ABTS^•+ and DPPH radical scavenging capacities of 89.33% and 52.71%, respectively), total polyphenol content (235.10 mg/g), and emulsification activity (EAI) and stability (ESI) values (109.27 m²/g and 135.05 min, respectively). Moreover, SMHs-PC emulsion showed the smallest particle size (467.20 nm), highest viscosity (520.19 Pa.s), highest protein adsorption (94.33%), and lowest release rate of free fatty acids (FFAs) (18.61%) after digestion. These results provided valuable information for the use of modified SMHs as emulsifiers, which is a promising approach for increasing the value of soybean meal.

Reducing disulfide bonds as a robust strategy to facilitate the self-assembly of cod protein fabricating potential active ingredients-nanocarrier

In this study, a novel method was developed to encapsulate hydrophobic compounds by self-assembly of cod protein (CP) triggered by breaking disulfide bonds. Curcumin (Cur), a representative lipid-soluble polyphenol, was selected as a model to evaluate the potential of CP nanoparticles as novel and accessible nanocarriers. Results showed that the protein structure gradually unfolded with increasing dithiothreitol (DTT) concentration, indicating that S-S cleavage was conducive to forming a looser structure. The resultant unfolded CP exposed more hydrophobic sites, facilitating its interaction with hydrophobic compounds. The encapsulation efficiency (EE) of formed CP-Cur nanoparticles was relatively high, reaching 99.09%, 98.8%, and 89.77% when the mass ratios of CP to Cur were 20:1, 10:1, and 5:1 (w/v), respectively. The hydrophobic interaction, weak van der Waals, and hydrogen bond were the forces contributing to the formation of CP-Cur nanoparticles, whereas the hydrophobic interaction played a crucial role. The CP-Cur complex exhibited increased stability and a homogeneous-stable structural phase. Thus, this research not only proposed a novel and simple encapsulation method of hydrophobic bioactive compounds but also provided a theoretical reference for the application of reductants in food or pharmacy system.

Industrial Application of Protein Hydrolysates in Food

Protein hydrolysates, which may be produced by the protein in the middle of the process or added as an ingredient, are part of the food formula. In food, protein hydrolysates are found in many forms, which can regulate the texture and functionality of food, including emulsifying properties, foaming properties, and gelation. Therefore, the relationship between the physicochemical and structural characteristics of protein hydrolysates and their functional characteristics is of significant importance. In recent years, researchers have conducted many studies on the role of protein hydrolysates in food processing. This Review explains the relationship between the structure and function of protein hydrolysates, and their interaction with the main ingredients of food, to provide reference for their development and further research.

Hybrid suture coating for dual-staged control over antibacterial actions to match well wound healing progression

Absorbable sutures have moved to the forefront in surgical fields with a huge market. Antibacterial activity is one indispensable feature for the next generation of absorbable sutures. This study develops a simple and cost-effective coating method to endow sutures with staged control over antibacterial actions to achieve enhanced dual stages of the wound healing process. This method is achieved in aqueous solution under mild conditions without the usage of any organic solvent and reserves the fundamental properties of suture materials, based on the pH-dependent reversible self-polymerization of tannic acid (TA) together with the strong adhesion of poly (tannic acid) (PTA) not only toward the suture surface but also with TA. Just by changing pH of TA solution, a hybrid coating (MPTA) composed of PTA and TA could be readily formed on the commercialized sutures originating from synthetic and natural materials. In the initial post-surgery stage, wound sites are susceptible to aseptic and/or bacterial inflammation. The resulting acid conditions induce burst release of antibacterial TA mostly coming from the adsorbed TA monomer. In the later stage, TA release is tailored totally depending on the pH conditions determined by the healing degree of wounds, allowing the sustained antibacterial prevention in a biologically adjustable manner. Thus, antibacterial MPTA coating meets the rigid requirements that differ distinctly during two major wound healing stages. Nontoxic MPTA coating on sutures leads to excellent post-implantation outcomes regarding bacterial prevention/elimination, anti-inflammation, tissue repair and wound healing. Moreover, MPTA coating provides sutures with a robust platform for functional expansion due to the matrix-independent adhesive ability of PTA.

Modulating aroma release of flavour oil emulsion based on mucoadhesive property of tannic acid

Flavour is a crucial sensory element that determines the consumers' preference for food and beverages. In this study, we determined the effects of complex gum arabic (GA) and tannic acid (TA) on the aroma release of flavour oil emulsions in vitro by simulating oral processing conditions. GA and TA were used to stabilize flavour oil emulsions. Visualization of in vitro retention using ex vivo porcine tongue, detection of aroma release in the model mouth, and sensory evaluation of flavour emulsions were performed to determine the effect of TA and GA. The results indicated that the retention of emulsions and the release of aroma compounds were modulated by TA and GA, which could be because of interactions that occurred between GA and TA in emulsions and mucins on the tongue. GA enhanced aroma release, whereas TA contributed to the retention or slow release of target aroma compounds.

Advances in dietary proteins binding with co-existed anthocyanins in foods: Driving forces, structure-affinity relationship, and functional and nutritional properties

Anthocyanins, which are the labile flavonoid pigments widely distributed in many fruits, vegetables, cereal grains, and flowers, are receiving intensive interest for their potential health benefits. Proteins are important food components from abundant sources and present high binding affinity for small dietary compounds, e.g., anthocyanins. Protein-anthocyanin interactions might occur during food processing, ingestion, digestion, and bioutilization, leading to significant changes in the structure and properties of proteins and anthocyanins. Current knowledge of protein-anthocyanin interactions and their contributions to functions and bioactivities of anthocyanin-containing foods were reviewed. Binding characterization of dietary protein-anthocyanins complexes is outlined. Advances in understanding the structure-affinity relationship of dietary protein-anthocyanin interaction are critically discussed. The associated properties of protein-anthocyanin complexes are considered in an evaluation of functional and nutritional values.

Improving foam performance using colloidal protein-polyphenol complexes: Lactoferrin and tannic acid

In this study, colloidal complexes were prepared from bovine lactoferrin (BLF) and tannic acid (TA) and then their ability to form and stabilize foams was characterized. The molecular interactions between BLF and TA were studied using fluorescence and molecular docking analysis, which suggested that hydrophobic forces were primarily involved in holding the complexes together. The production of colloidal BLF-TA complexes was supported by increases in turbidity and mean particle diameter, quenching of intrinsic fluorescence, decrease in surface hydrophobicity, and change in conformation. When used alone, BLF exhibited good foam formation but poor foam stability properties. In contrast, BLF-TA complexes exhibited good foam stability but poor foamability properties. The change in foaming properties of the proteins was closely related to their interactions with the polyphenols. These findings may be useful for the development of novel functional ingredients to construct food foams with good physicochemical and nutritional attributes.

Polyphenolic phytochemicals as natural feed additives to control bacterial pathogens in the chicken gut

Poultry provides an important protein source consumed globally by human population, and simultaneously, acts as a substantial reservoir of antibiotic resistant bacterial species such as Escherichia coli, Salmonella, Campylobacter, Clostridium perfringens. These bacterial species can include commensal strains with beneficial roles on poultry health and productivity, and pathogenic strains not only to poultry but zoonotically to man. This review paper evaluates the role of phytochemicals as possible alternatives to antibiotics and natural anti-bacterial agents to control antibiotic resistance in poultry. The focus of this paper is on the polyphenolic phytochemicals as they constitute the major group; carvacrol oil (the active ingredient of oregano), thymol oil (the main ingredient of oregano), oregano oil, and tannins oil as feed additives and their mechanism of actions that might enhance avian gut health by controlling antibiotic-resistant bacterial strains spread in poultry.

Lipid oxidation and in vitro digestion of pickering emulsion based on zein-adzuki bean seed coat polyphenol covalent crosslinking nanoparticles

This study first used adzuki bean seed coat polyphenol (ABSCP) to modify zein and form covalent nanoparticles (ZAP) and used ZAP as an emulsifier to stabilize Pickering emulsion (ZAE). The results showed that the ratio of zein-ABSCP controlled the physicochemical properties of the two compounds. ZAP could be absorbed on the water-oil surface and stabilized ZAE, which presented as a non-Newtonian fluid state with good rheological properties. The addition of ABSCP inhibited lipid oxidation in a dose-dependent manner, as verified through the analysis of accelerated oxidation experiments (50 °C, 20 days). In in vitro gastrointestinal digestion of ZAE showed that free fatty acids (FFA) release gradually decreased with ABSCP concentration increasing. Moreover, ABSCP gave ZAE a strong red-yellow color, which allowed ZAE to be used for specific applications (e.g., natural pigments). Our findings make it feasible to develope functional food and food-grade delivery systems made of protein-plant polyphenols nanoparticles.

Fabrication and emulsifying properties of non-covalent complexes between soy protein isolate fibrils and soy soluble polysaccharides

Non-covalent complexes (SPIF/SSPS) of soy protein isolate fibrils (SPIF) and soy soluble polysaccharides (SSPS) were fabricated and used to stabilize oil-in-water (O/W) emulsions. FT-IR spectroscopy and zeta potential results demonstrated that the interactions between SPIF and SSPS mainly include hydrogen bonding and electrostatic interactions. The presence of SSPS decreased the particle size and surface hydrophobicity of SPIF, resulting in a decrease and redshift of the fluorescence intensity. During the interfacial adsorption process, SPIF/SSPS complexes had lower diffusion and penetration rates compared with pure SPIF because of their hydrophilic region, but the molecular reorganization rate increased. Emulsions stabilized with the SPIF/SSPS complex at 5 : 5 (i.e., 1 : 1) ratio had both an excellent emulsifying activity index (EAI) of 26.17 m2 g-1 and an excellent emulsifying stability index (ESI) of 93.01%, as well as the smallest emulsion droplet particle size of 1.74 μm. Meanwhile, no flocculation was observed in this emulsion which is attributed to the sufficient steric stabilization provided by the hydrophilic SSPS. After three weeks of storage, there was no phase separation observed in the emulsions stabilized by SPIF/SSPS complexes in 5 : 4 and 5 : 5 ratios and the Turbiscan stability indices were 17.86 and 15.14, respectively, much lower than the other emulsion formulations tested.

Anti-aging properties of phytoconstituents and phyto-nanoemulsions and their application in managing aging-related diseases

Aging is spontaneous and inevitable process in all living beings. It is a complex natural phenomenon that manifests as a gradual decline of physiological functions and homeostasis. Aging inevitably leads to age-associated injuries, diseases, and eventually death. The research on aging-associated diseases aimed at delaying, preventing or even reversing the aging process are of great significance for healthy aging and also for scientific progress. Numerous plant-derived compounds have anti-aging effects, but their therapeutic potential is limited due to their short shelf-life and low bioavailability. As the novel delivery system, nanoemulsion can effectively improve this defect. Nanoemulsions enhance the delivery of drugs to the target site, maintain the plasma concentration for a longer period, and minimize adverse reaction and side effects. This review describes the importance of nanoemulsions for the delivery of phyto-derived compounds and highlights the importance of nanoemulsions in the treatment of aging-related diseases. It also covers the methods of preparation, fate and safety of nanoemulsions, which will provide valuable information for the development of new strategies in treatment of aging-related diseases.

Prolamin-based complexes: Structure design and food-related applications

Prolamins are a group of safe food additives that are biocompatible, biodegradable, and sustainable. Zein, gliadin, kafirin, and hordein are common prolamins that have been extensively studied, particularly as these form colloidal particles because of their amphiphilic properties. Prolamin-based binary/ternary complexes, which have stable physicochemical properties and superior functionality, are formed by combining prolamins with polysaccharides, polyphenols, water-soluble proteins, and surfactants. Although the combination of prolamins with other components has received attention, the relationship between the structural design of prolamin-based complexes and their functionalities remains uncertain. This review discusses the production methods of prolamin-based complexes, the factors influencing their structural characteristics, and their applications in the food industry. Further studies are needed to elucidate the structure-function relationships between prolamins and other biopolymers, as well as the toxicological effects of these complexes in food.

Nanoencapsulation of unsaturated omega-3 fatty acids as protection against oxidation: A systematic review and data-mining

The chemical structure of unsaturated fatty acids makes them highly prone to oxidation, which decreases their nutritional properties. Nanocarriers have the ability to protect unstable nutraceuticals and take them to their specific targets. Thus, the aim is to determine the effectiveness of nanoencapsulation of omega-3 unsaturated fatty acids as protection against oxidation, as well as to apply data-mining approach to identify nanoencapsulation profiles. Three databases were used to search for studies focused on comparing omega-3 encapsulation to the active compound in its raw form. Studies without oxidation test or no use omega 3-rich oil as active ingredient in nanoformulations were excluded. Twenty-three studies were included in the systematic review. The qualitative analysis indicated that the main evaluated parameters were encapsulation efficiency (%), physical-chemical parameters and oxidation (analyzed at different storage temperatures), oil type, and whether the formulation was added to food. With regard to quantitative analysis, studies that did not perform oxidation tests focused on comparing free oil to the encapsulated one were excluded. Data-mining indicated that encapsulation efficiency and particle size were the main characteristic defining nanocarrier's effectiveness in protecting the oil against oxidation. Nevertheless, it is important to note the main characteristics associated with oil protection in nanocarriers.

Limited hydrolysis and conjugation of zein with chitosan oligosaccharide by enzymatic reaction to improve functional properties

In order to improve its aqueous solubility and emulsifying function, zein was partially hydrolyzed by trypsin and conjugated to chitosan oligosaccharide lactate by transglutaminase. Hydrolysis and covalent linkage to chitosan oligosaccharide was confirmed by free amine content, gel electrophoresis, and infrared spectroscopy. Enzymatic glycosylation was optimized at pH 6, 44 °C, and 4 h to bind approximately 95% of the free amines in the hydrolysates to chitosan oligosaccharide. Hydrolysis and conjugation increased solubility of zein by 47.60% and 72.93%. Hydrolysis and conjugation also decreased surface hydrophobicity by more than 20% and more than doubled emulsifying activity index, emulsion stability index, and foaming capacity. This enzymatic modification has potential to be applied to improve functional properties of other prolamins.

Improvement of protein emulsion stability through glycosylated black bean protein covalent interaction with (-)-epigallocatechin-3-gallate

This study investigated the effects of covalent conjugates combined by glycosylated black bean protein isolate (BBPI-G) and (−)-epigallocatechin-3-gallate (EGCG) on the emulsion stability. Fourier transform infrared (FTIR) spectroscopy showed that covalent binding of EGCG with BBPI-G made the protein molecule unfolded. Besides, the emulsifying properties of BBPI-G were increased after combined with EGCG. BBPI-G–EGCG emulsion had lower mean particle size and higher content of interfacial protein adsorption (AP), which resulted in thicker and more impact oil–water interface. Therefore, the stability of emulsions was significantly improved. Furthermore, the emulsions prepared by BBPI-G–EGCG compounds exhibited considerable stability in storage, oxidation, thermal treatments, freeze–thaw and freeze-dried powders resolubility. This study demonstrated that the covalent bond of glycosylated protein and polyphenols could advance the emulsifying performance of protein, and BBPI-G–EGCG covalent complex was an effective emulsifier for preparing high stability emulsions.

Stability improvement of emulsions stabilized by covalent conjugation with glycosylated black bean protein and EGCG (BBPI-G–EGCG) was studied through structure changes of proteins and emulsion properties.

Impact of pH, ferrous ions, and tannic acid on lipid oxidation in plant-based emulsions containing saponin-coated flaxseed oil droplets

The influence of pH (pH 3, 5 and 7), ferrous ions (0 or 100 μM Fe²⁺), and tannic acid (0 to 0.1% TA) on the rate of lipid oxidation in plant-based emulsions containing quillaja saponin-coated flaxseed oil droplets was studied. Tannic acid formed complexes with Fe²⁺ whose properties depended on TA:Fe²⁺ ratio and pH. Emulsions were incubated at 37 °C in the dark, and changes in their particle size, surface potential, appearance, microstructure, and lipid oxidation status were monitored over time. The initial ζ-potential and mean particle diameter of the emulsions were -68 mV and 0.18 μm, respectively. In the absence of TA, the particle size increased appreciably during storage due to droplet coalescence, as rapid oxidation occurred. In the presence of TA, the emulsions were more resistant to both droplet aggregation and lipid oxidation, as a result of its strong ferrous ion-binding properties. The lipid oxidation rate increased with decreasing pH, which was attributed to an increase in ferrous ion's water-solubility and activity in acidic solutions. The addition of Fe²⁺ greatly accelerated lipid oxidation, but the oxidation rate was decreased by also adding TA. These results suggest that tannic acid is an effective antioxidant in emulsions, which can be attributed to its ferrous ion-chelation properties.