Effect of wet-media milling on the physicochemical properties of tapioca starch and their relationship with the texture of myofibrillar protein gel

Insight into the mechanism of gel properties, microstructure and flavor of surimi gels improved by wheat bran with different particle sizes

This study investigated the effect of wheat bran (WB) with different particle sizes (W1, 155.00 ± 2.08 μm; W2, 78.33 ± 0.52 μm; W3, 46.90 ± 0.60 μm; W4, 23.53 ± 0.49 μm; and W5, 12.97 ± 0.19 μm) on the gel strength, texture, microstructure, dynamic rheological, secondary structures and flavor of surimi gels. Results demonstrated that the gel strength and water-holding capacity (WHC) of the surimi gels gradually increased with the decrease in WB particle size. The added W5 (12.97 ± 0.19 μm) increased the bound water content in the surimi gels by 12.60 % whereas the free water decreased by 6.59 % (p < 0.05), indicating that the addition of superfine WB contributed to the conversion of free water into bound water in the surimi gels matrices. Microstructural observations indicated that WB with different particle sizes promoted the formation of a continuous gel matrix and a denser surimi gel network structure. The β-sheet dominated in the secondary structure of surimi gels. Electronic tongue results showed that the addition of WB reduced the bitterness of surimi gels. Gas chromatography-ion mobility spectrometry (GC-IMS) results revealed that more esters were present in the samples when W1, W2, and W3 were added. Overall, W5 had the best enhancement effect on the quality of surimi gels, and this study lays the reference value for WB as an agricultural by-product to improve the quality of surimi products.

Effects of cross-linked/acetylated tapioca starches on the gelling properties, rheological behaviors and microstructure of myofibrillar protein gels: Perspective on molecular interactions and phase transition

The present work mainly investigated the changes of gel characteristics, rheological properties and ultrastructure of myofibrillar protein (MP) gels with varying amounts (2, 4, 6, and 8 %, w/w) of cross-linked tapioca starch (CTS) or acetylated tapioca starch (ATS). The findings showed that CTS or ATS notably improved the gelling characteristics (such as gel strength and water retention) of mixed MP gels in a dose-dependent manner (P < 0.05), which was clearly verified by the results of rheological behavior tests under different modes. Moreover, compared to ATS, CTS rendered higher gel strength and promoted the formation of a more uniform and smoother mixed MP gel matrix, which was mainly attributed to the higher peak viscosity of CTS. Furthermore, the images of iodine staining indicated that in mixed MP gels, the continuous phase supported by MP was gradually transited to being starch supported as the amounts of CTS or ATS increased between 2 % and 8 %. Additionally, hydrophobic interactions and disulfide bonds were the principal chemical forces of mixed MP gels, which could promote the occurrence phase transition. Briefly, our present work provided some vital understanding of the molecular interactions between MP and modified tapioca starches, which could efficiently modulate the quality profiles of meat products.

Hofmeister ion effects induced by different acidifiers and alkalizers improve the techno-functional properties of complex rapeseed protein during pH-driven self-assembly

pH-driven method is an effective strategy to prepare complex protein. This study provides guidance on how to select acidifiers and alkalizers from view of Hofmeister ion effects. Cations and anions regulated the molecular structure (particle size, surface charge, protein folding/unfolding, structural orderliness) of complex rapeseed proteins (CRPs) mainly via electrostatic and hydrogen bond. No evident changes were found in the molecular weight distribution, but their distribution on oil/air-water interface varied greatly. Various techno-functional properties of CRPs were synergistically improved: Citrate3- and Na+ increased the emulsifying activity index of CRPs from 80 to 102.21 m2/g; Citrate3-, K+ and Na+ made the foaming stability of CRPs close to 80 % after 60 min of storage. Moreover, the oil/water-holding and gel properties of CRPs were regulated effectively. These findings demonstrate the key role of Hofmeister ion effects in improving CRPs properties, contributing to develop, select, and apply novel acidifiers and alkalizers during pH-driven treatment.

Effect of ultrasonic pretreatment on physicochemical, thermal, and rheological properties of chemically modified corn starch

This study investigated the effects of ultrasonic and three chemical individual and dual modification treatments on corn starch's physicochemical, thermal, and rheological properties. Ultrasonication and the three chemical treatments disrupted the starch granules with a decrease in particle size and a significant increase in the ζ-potential. The hydrophilicity of ultrasonic-oxidized dual-modified starch (U-O-CS) was the highest, at 0.854 g/g. The lipophilicity of ultrasonic-esterified dual-modified starch (U-E-CS) was the highest, at 1.485 g/g. The gelatinization temperature of ultrasonic, oxidation, and cross-linking modified starches increased significantly, with cross-linking starches being the largest. Oxidative treatment significantly decreased the starch's G' and G" and weakened the textural properties. The rheological properties of U-O-CS were further weakened. The G' of the starch decreased after the esterification treatment, while the G" increased, and the textural properties were cut. The maximum rheological and textural properties were obtained for crosslinked modification, with a hardness value of 284.70 g.

Effect of wet media milling on starch-quercetin complex: Enhancement of Pickering emulsifying ability and oxidative resistance

This research explored the effect of media milling on complexation of corn starch (CS) and quercetin (QC), interaction mechanism and Pickering emulsifying ability of corn-quercetin (CS-QC) complex. CS-QC with QC/CS ratio of 1:24 had the highest encapsulation efficiency of 76.00 ± 1.30 %. Average volume-mean diameter, average whole molecular size (Rh) and debranchedamylopectinchain length of CS-QC were significantly decreased after milling. Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) spectra confirmed the complexation between CS and QC. Emulsifying capacity and emulsion stability of Pickering emulsion stabilized by 5 % CS-QC complex particles after 120 min milling reached 100.00 % and 100.00. Pickering emulsions stabilized by these complex particles demonstrated superior oxidative stability. These results demonstrated that media milling could be an efficient physical approach to obtain starch-polyphenol complex by enhancing non-covalent interactions, which could not only be used as food-grade Pickering emulsifiers, but also retard lipid oxidation.

Incorporation of cross-linked/acetylated tapioca starches on the gelling properties, rheological behaviour, and microstructure of low-salt myofibrillar protein gels: Perspective on phase transition

This study investigated the gelling properties, rheological behaviour, and microstructure of heat-induced, low-salt myofibrillar protein (MP) gels containing different levels (2%, 4%, 6%, and 8%, w/w) of cross-linked (CTS) or acetylated (ATS) tapioca starch. The results indicated that either CTS or ATS significantly enhanced the gel strength and water-holding capacity of low-salt MP gels (P < 0.05), an outcome verified by the rheological behaviour test results under different modes. Furthermore, iodine-staining images indicated that the MP-dominated continuous phase gradually transited to a starch-dominated phase with increasing CTS or ATS levels, and 4% was the critical point for this phase transition. In addition, hydrophobic interactions and disulphide bonds constituted the major intermolecular forces of low-salt MP gels, effectively promoting phase transition. In brief, modified tapioca starches possess considerable potential application value in low-salt meat products.

Acid Hydrolysis of Quinoa Starch to Stabilize High Internal Phase Emulsion Gels

Starch nanocrystals (SNCs) to stabilize high internal phase emulsions (HIPEs) always suffer low production efficiency from acid hydrolysis. Due to its small granule size, Quinoa starch (QS) was selected to produce SNCs as a function of acid hydrolysis time (0-4 days), and their structural changes and potential application as HIPEs' stabilizers were further explored. With increasing the acid hydrolysis time from 1 day to 4 days, the yield of QS nanocrystals decreased from 30.4% to 10.8%, with the corresponding degree of hydrolysis increasing from 51.2% to 87.8%. The occurrence of QS nanocrystals was evidenced from the Tyndall effect and scanning electron microscopy with particle size distribution. The relative crystallinity of QS subjected to different hydrolysis times (0-4 days) increased from 22.27% to 26.18%. When the acid hydrolysis time of QS was 3 and 4 days, their HIPEs showed self-standing after inversion, known as high internal phase emulsion gels (HIPE gels), closely related to their densely packed interfacial architecture around oil droplets, seen on an optical microscope, and relatively high apparent viscosity. This study could provide a theoretical guidance for the efficient production and novel emulsification of SNCs from QS to HIPE gels.

Molecular regulation of rapeseed protein for improving its techno-functional properties

To improve the techno-functional properties of rapeseed protein (RP), this work tried to regulate the molecular structure of RP via inducing the co-assembly of RP with zein and whey protein (WP). The results showed that WP and zein mainly regulate the folding process of RP through hydrophobic and disulfide bonds, thereby altering the structural conformation and forming stable complex RP (CRP). WP addition not only increased the number of surface charges and hydrophilicity of proteins, but also decreased their sizes, improved the water solubility, as well as the availability of active groups. These changes significantly increased the foaming capacity (from 60 % to 147 %) and in vitro gastric digestion rate (from 10 % to 60 %) of CRP. Besides, WP also contributed to the formation of gels and the regulation of their textural profiles. Comparatively, zein improved the hydrophobicity of CRP and balanced degree of intermolecular forces, which effectively increased the emulsifying activity index of CRP from 22 m2/g to 90 m2/g. Zein decreased the hardness, springiness and water-holding capacity of gel, but increased its gumminess and chewiness. Overall, both WP and zein effectively changed the structural conformation of RP, and improved its techno-functional properties, which provides an effective strategy to modify protein.

Rheological, thermal, and structural properties of heat-induced gluten gel: Effects of starch with varying degrees of debranching

This study evaluated the effects of starch with varying degree of debranching on the rheological, thermal, and structural properties of heat-induced gluten gel. As the duration of starch debranching treatment increased from 0 to 8 h, the viscoelasticity of the gel containing debranched starch (DBS) improved. Compared with the gluten gel (G), the gel strength of the G + DBS (8 h) sample increased by 65.2 %. The degradation temperature of gluten was minimally affected by DBS, while the weight loss rate increased by 4.4 %. Furthermore, the α-helical structure of gluten decreased, concomitant with an increase in β-sheet content. Notably, DBS treated for 8 h exhibited more hydrogen bonds with the tyrosine of gluten and triggered disulfide bridge conformation to transition from g-g-g to t-g-g, thereby reducing the stability of the molecular conformation of gluten proteins, as evidenced by the decreased height and width of the molecular chains observed in atomic force microscopy images. Overall, the composite gel structure induced by DBS exhibited a more continuous and homogeneous owing to the improved compatibility between DBS and gluten proteins, favoring the formation of a robust gel. These findings provide valuable insights for utilizing DBS to enhance gluten gel properties.

Emulsified sausages with yeast protein as an animal fat replacer: Effects on nutritional composition, spatial structure, gel performance, and sensory quality

This paper investigated the effect of yeast protein (YP)-fat replacement on the nutritional composition, spatial structure, gel performance, and sensory quality of emulsified sausages. YP is enriched with essential amino acids (36.49 g/100 g), which improved the nutritional quality of sausages whereas reducing its fat content. Moreover, YP could absorb water and fat, thus the YP-added sausages exhibiting an amount-dependent increase in emulsion stability and water migration. The microstructure illustrated that YP acted as a filler to improve structural homogeneity and compactness of the pork gel network. And YP-fat replacement could significantly enhance the hardness, gel strength and elasticity of sausages whereas decreasing the viscosity. Additionally, at partial or full YP-fat replacement (25-100%), the YP-added sausages scored higher in odor and texture, as well as better antioxidant stability than controls. Overall, YP can be employed as a new fat substitute for the preparation of healthy and nutritional sausages, while maintaining the sensory quality.

Stabilizing effect of silver carp myofibrillar protein modified by high intensity ultrasound on high internal phase emulsions: Protein denaturation, interfacial adsorption and reconfiguration

This study evaluated the impact of high intensity ultrasound (HIU) on myofibrillar proteins (MP) from silver carp, and investigated the stabilizing effect of HIU-treated MP (UMP) on high internal phase emulsions (HIPEs). Ultrasonic cavitation induced protein denaturation by decreasing size and unfolding conformation, to expose more hydrophobic groups, particularly UMP at 390 W, showing the smallest particle size (181.71 nm) and most uniform distribution. These structural changes caused that UMP under 390 W exhibited the highest surface hydrophobicity, solubility (92.72 %) and emulsibility (115.98 m2/g and 70.4 min), all of which contributed to fabricating stable HIPEs with oil volume fraction up to 0.8. UMP-based HIPEs possessed tightly packed gel network and self-supporting appearance due to the adsorption of numerous proteins at the oil-water interface and the reduction of interfacial tension by protein reconfiguration. The larger interface coverage reinforced cross-linking between interfacial proteins, thus increasing the viscoelasticity and recoverability of HIPEs, also the resistance to centrifugal force, high temperature (90 °C, 30 min) and freeze-thaw cycles. These findings furnished insightful perspectives for MP deep processing through HIU, expanding the high-value application of UMP-based HIPEs in fat replacer, nutritional delivery system with high encapsulation content and novel 3D printing ink.

Effect of starch-based emulsion with different amylose content on the gel properties of Nemipterus virgatus surimi

The emulsion was prepared with peanut oil and corn starch with different amylose content using high-speed homogenization assisted high-pressure homogenization, and the effect of starch-based emulsion on the gel properties, whiteness, microstructure, protein secondary structure, chemical forces, texture and sensory properties of Nemipterus virgatus surimi was investigated. The results showed that high amylose corn starch was more beneficial to the stability of emulsion than normal and waxy starch. The gel strength, water holding capacity and texture properties of surimi were significantly improved by adding 10 % waxy corn starch-based emulsion or 15 % high amylose or normal corn starch-based emulsion. Moreover, the whiteness of surimi gel containing starch-based emulsion was higher, and the microstructure was more compact and delicate than that of surimi without emulsion. The addition of starch-based emulsion could increase the hydrophobic interaction and disulfide bond content, and promote the transformation of protein secondary structure to irregular direction. The sensory properties such as color, texture, taste and overall acceptability could be improved to varying degrees. Therefore, starch-based emulsion could be used to enhance the gel properties and nutritional value of surimi products.

A mini review on manipulation of carbohydrate for better use in surimi and surimi products: modification and compounding

Carbohydrate is widely used in the production of surimi and surimi products to improve their qualities, such as anti-freezing capability, gelling ability, nutrition, flavor and 3D printability. More and more native carbohydrates have been modified through physical methods (e.g., ball milling, irradiation and differential sedimentation), chemical method (e.g., deacetylation, hydroxypropylation and acetic acid esterification) or enzymatic method (e.g., chitosanase) before being used in the processing of surimi and surimi products in recent years. At the same time, different carbohydrates are compounded and applied to surimi and surimi products. The modified and compounded carbohydrates in surimi have been proved to improve quality of surimi and surimi products more pronouncedly than native carbohydrates. Therefore, this review summarizes the manipulation of carbohydrate by modification and compounding to improve the qualities of surimi and surimi products. Moreover, the prospects for carbohydrate modification and compounding for use in surimi and surimi products are discussed. © 2023 Society of Chemical Industry.

Media-milled agar particles as a novel emulsifier for food Pickering emulsion

Pickering emulsions was successfully fabricated using ball-milled agar particles with sizes and sulfate content around 7 μm and 0.62 %, respectively. These particles were obtained through a simple media-milling process using agar powders initially sized at 120 μm. The lamellated agar is aggregated into a mass after the milling process. The surface charge and hydrophobicity of the ball-milled agar particles were characterized through zeta potential and contact angle measurements, respectively. The droplet size of Pickering emulsions was related to oil fraction and particle concentration, ranging from approximately 45 μm to 80 μm. Ball-milled agar stabilized emulsions were sensitive to pH and salt conditions. The results of confocal laser scanning microscopy and cryo-SEM showed that at low particle concentrations and oil fractions, ball-milled agar stabilized the emulsions by dispersing particles on the surface of the oil droplets through electrostatic repulsion. Conversely, ball-milled agar stabilized the emulsions under high particle concentrations and oil fractions by forming a gel network structure to bind the oil droplets. In this research, this developed method provides the basis for the high-value application of agar and a new idea for preparing stable food-grade Pickering emulsion-based functional foods using raw-food material without surface wettability.

Interaction with wheat starch affect the aggregation behavior and digestibility of gluten proteins

Understanding the interplay between gluten and wheat starch is crucial for elucidating the digestibility mechanism of gluten in wheat-based products. However, this mechanism remains under-investigated. This study sought to elucidate the influence of starch-induced protein structural modifications on gluten digestion. Our findings revealed that starch considerably enhanced gluten digestion. In the presence of starch, gluten protein digestibility increased from 10.91 % (in the control group with a gluten-to-starch ratio of 1:0) to 14.40 % (in the complex with a gluten-to-corn starch ratio of 1:1). The diminished gluten protein digestibility due to starch may be ascribed to modifications in protein configuration and aggregation behavior. Morphological studies suggested that starch not only functioned as filler particles but also diluted the gluten matrix. A protein network assessment further affirmed that both the junction density and branching rate of gluten proteins decreased notably by 29.9 % and 25.1 %, respectively. Conversely, lacunarity increased by 1.92-fold, compromising the cohesiveness and connectivity of the gluten matrix. Elevated starch concentrations suppressed the formation of disulfide bonds, impeding gluten protein aggregation. Concurrently, gluten-starch interactions were governed by hydrogen bonds and hydrophobic associations. In summary, starch augmented gluten protein digestibility by curtailing their polymerization. This revelation might offer novel perspectives on optimizing gluten protein digestion and utilization.

The effect of non-thermal physical modification on the structure, properties and chemical activity of starch: A review

Non-thermal physical treatments has obvious advantages in regulating the structure and properties of starch compared with chemical treatment. Hance, this article summarized and compared the effects of three kinds of non-thermal physical treatments including grinding and ball milling, high hydrostatic pressure and ultrasonic on the structure, properties and chemical activity of starches from different plants. The potential applications of non-thermal physical modified starch were introduced. And strategies to solve the problems in the current research were put forward. It is found that although starch has a dense structure, the starch granules could be deformed under three kinds of non-thermal physical treatments, which could damage the granule morphology, microstructure, and crystal structure of starch, reduce particle size, increase solubility and swelling power, and promote starch gelatinization. Three kinds of non-thermal physical treated starch could be used as flocculant thickener, starch based edible films and fat substitutes. Non-thermal physical treatments caused the structure of starch to undergo three stages, which were similar to mechanochemical effects. When starch was in the stress stage and the transition stage from aggregation to agglomeration, its active sites significantly increase and move inward, ultimately leading to a significant increase in the chemical activity of starch.

Investigation of the effects and mechanism of incorporation of cross-linked/acetylated tapioca starches on the gel properties and in vitro digestibility of kung-wan

The effects and mechanism of incorporation of cross-linked tapioca starch (CTS) or acetylated tapioca starch (ATS) on the gel properties and in vitro digestibility of kung-wan (a Chinese-style meatball) were evaluated. The results indicated that incorporation of either CTS or ATS significantly enhanced the gel properties of kung-wan in a dose-dependent manner (P < 0.05), as well as the rheological properties of meat batter. Moreover, hydrogen bonds and electrostatic interaction were the major intermolecular forces in kung-wan when incorporated with CTS or ATS. Meanwhile, CTS and ATS acted as fillers in the meat protein gel matrix, which was further verified by the microstructure of kung-wan. However, CTS produced a more uniform and dense meat protein gel network than ATS, which was mainly due to its limited swelling characteristics. In addition, the incorporation of CTS or ATS significantly increased the in vitro digestibility of protein in kung-wan with increasing level of addition (P < 0.05). However, no significant differences in protein digestibility were detected between the CTS and ATS groups at the same addition level (P > 0.05). Our results provided some critical points for the actual application of modified tapioca starch to promote the quality profiles of kung-wan.

Exploring the influence mechanism of water grinding on the gel properties of corn starch based on changes in its structure and properties

BACKGROUND

At present, most studies have focused on the preparation of modified starches by dry grinding. As an excellent starch plasticizer, water might enhance the action of grinding on the structure of starch granules, and water grinding might improve the gel properties of starch. Therefore, this article explored the influence mechanism of water grinding on the gel properties of corn starch based on the changes in its structure and properties.

RESULTS

The results showed that water grinding could make water enter the starch granules and hydrate the starch molecules, and the starch gelatinized after water grinding for 20 min. Thus, water enhanced the action of grinding on the structure of the starch granules. Under the plasticization and grinding action of water grinding, the mechanochemical effect of the starch granules occurred. When the starch was in the aggregation stage (7.5-10 min), the crystallinity of the starch increased, and the starch molecules rearranged into a more stable structure, which increased apparent viscosity (η), elastic modulus (G') and viscous modulus (G″) of the starch gels.

CONCLUSION

Therefore, appropriate water grinding (10 min) contributed to increasing the viscoelasticity of starch gels. This study provided a theoretical foundation for research on improving the properties of starch by mechanical modification in future. © 2023 Society of Chemical Industry.

Multi-scale structure and digestive property of bran starch in different particle size wheat bran

In this study, the multi-scale (granular, molecular, crystalline, lamellar and helical) structure and digestive property of starch isolated from wheat bran of different particle size, including plant scale (1110 μm), tissue scale (235 μm, 83 μm) and cell scale (19 μm), were investigated and compared with wheat flour starch. Bran milling modified bran starch to varying degrees. Tissue-scale milling of bran reduced the granule size of bran starch, but did not significantly modify its molecular, lamellar, crystalline and helical structure. However, cell-scale milling caused significant destruction of crystalline regions and double helix, and increase in starch digestibility. In addition, compared to wheat flour starch, wheat bran starch had more resistant starch and lower digestibility, which were highly correlated with its thinner lamellas, more double helix proportion and compact fractal. This study highlights the effect of supramolecular structure on bran starch digestibility and contributes to the application of bran starch.

Yam Bean (Pachyrhizus erosus L. Urban) Powder Improves Grass Carp Myofibrillar Protein Gel by Forming Disulfide Bonds, Hydrogen Bonds, and Proper Microstructure

This study aimed to analyze the impact of different additions (0-1.25%) of yam bean powder (YBP) on myofibrillar protein (MP) gel characteristics such as the structure, water-holding capacity (WHC), chemical interaction strength of grass carp MP, and texture. The results showed that the YBP exhibited a strong water absorption capacity and filled in the protein heat-induced polymerization gel network well, which enabled the gel network to capture and retain water effectively, resulting in MP gels containing YBP with excellent WHC and gel strength (0.75%). In addition, YBP induced the formation of hydrogen and disulfide bonds in proteins and inhibited the conversion of α-helices to β-sheets and β-turn structures, facilitating the formation of high-strength gel networks (p < 0.05). In conclusion, YBP can significantly improve the thermally induced gelling properties of grass carp MP. In particular, the addition of 0.75% YBP had the best effect in terms of filling the gel network of grass carp MP, resulting in the formation of a continuous and dense protein network, leading to the composite gel with the best WHC and texture.

Insight into the spatial distribution and interaction model of heat-induced micro- and nano-starch/myofibrillar protein blends

This work investigated the gelatinizing and hydration properties of raw and milled tapioca starches at micron and nano scale as well as their effects on gelation of myofibrillar proteins (MP) from Ctenopharyngodon idellus by analyzing rheology, texture and microstructure of heat-induced MP/starch blends. Milling induced starch granules damage to micron and nano scale, causing a fall in starch swelling power and a jump in water solubility. Among raw and milled starches, nano-starch had the best reinforcement effect on MP gel, i.e., MP/nano-starch showed the lowest critical gel concentration, highest G', strongest resistance to deformation and highest texture performance. Correlation analysis revealed that starch water solubility was responsible for the reinforced MP gel rather than starch swelling power. A schematic model was proposed for illustrating the interaction of starches and MP. All the blends had the ordered filamentous network as the basic skeleton, with some starches (granules and their fragments) in the voids or on the edge or surface of MP filaments as inert fillers, and some (chain segments) embedded in the filaments as active fillers. Almost all nano-starch were actively filled into the MP filaments to enhance the strength of filaments, thus achieving the best reinforcement effect on MP gel.

Evaluation and relationship analysis of pea protein on structure and heat-induced gel performance of myofibrillar protein

BACKGROUND

Surimi products occupy a large market in the food industry, and the gel performance is an important index to evaluate them. Thus, it is of great significance and practical value to find better food ingredients to regulate the structure and gel performance of surimi products. In this study, we used pea protein (PP) to restructure fish myofibrillar proteins (MPs) to achieve regulation of protein gel performance.

RESULTS

PP could enhance MP gel performance in terms of compressive strength, water-holding capacity, and some texture parameters. This may be the result of an increasing β-sheet content and a decreasing trend in the α-helix content, along with enhancements in hydrophobic interactions, nonspecific associations, and ionic bonds in a mixed PP-MP gel. The compressive strength, texture, and water-holding capacity of MP gel were positively correlated with surface hydrophobicity, active sulfhydryl, turbidity, and β-sheet of the mixed PP-MP system.

CONCLUSION

The findings suggest that PP can regulate the gel performance by remodeling the structure of MP. The regulation and correlation analysis between gel performance, structure, and physicochemical properties were explored and established to provide a theoretical basis for improving the quality of surimi products. This study will broaden the application of PP in the field of food processing and provide theoretical guidance for the manufacture of new surimi products. © 2023 Society of Chemical Industry.

Ball-milling: A sustainable and green approach for starch modification

Ball-milling is a low-cost and green technology that offers mechanical actions (shear, friction, collision, and impact) to modify and reduce starch to nanoscale size. It is one of the physical modification techniques used to reduce the relative crystallinity and improve the digestibility of starch to their better utility. Ball-milling alters surface morphology, improving the overall surface area and texture of starch granules. This approach also can improve functional properties, including swelling, solubility, and water solubility, with increased energy supplied. Further, the increased surface area of starch particles and subsequent increase in active sites enhance chemical reactions and alteration in structural transformations and physical and chemical properties. This review is about current information on the impact of ball-milling on the compositions, fine structures, morphological, thermal, and rheological characteristics of starch granules. Furthermore, ball-milling is an efficient approach for the development of high-quality starches for applications in the food and non-food industries. There is also an attempt to compare ball-milled starches from various botanical sources.

Lysozyme impacts gel properties of egg white protein via electrostatic interactions, polarity differences, local pH regulation, or as a filler

The effects of lysozyme on egg white gel properties and their underlying causes were investigated under comparison between lysozyme removed with ion exchange resin and three levels of commercial lysozyme powder (1/2, 2/2, 3/2 the natural concentration in egg white) re-added in the lysozyme-removed system. Results showed that a lysozyme-removed gel obtained the best water holding capacity (61.61 %), lowest cooking loss (11.85 %), and enhanced textural properties (hardness, 638.04 g; resilience, 0.57; and gumminess), which was attributed to lysozyme promoting protein aggregation and weakening electrostatic repulsion by charge neutralization and competition for water, and this could be eliminated by removing lysozyme. Besides, the stronger intermolecular interactions (enhanced ionic bonds, hydrogen bonds and inhibited hydrophobic interactions), the shorter transverse relaxation time (T₂₁ and T₂₂), as well as more uniform microstructure formed in the lysozyme-removed gel, allowing the gels to bind more water molecules. With return of lysozyme, the gel properties were weakened to varying degrees, which was also ascribed to the filling of lysozyme in gel matrix narrowed interspace for binding and storage of water. In sum, adjustment on the content of lysozyme can regulate the gel properties of egg white, so as to obtain gels with regulable gel quality and processing characteristics.

Structure and physicochemical properties of cross-linked and acetylated tapioca starches affected by oil modification

This work investigated the structure and physicochemical properties of cross-linked tapioca starch (CTS), acetylated tapioca starch (ATS) and their counterparts (Oil-CTS and Oil-ATS). The results showed oil on the interface of starch granules promoted granule agglomeration after oil modification. Besides, oil modification could increase granule size and destroy the crystalline structure but did not affect the molecular structure of starch. Meanwhile, oil-modified starches did not form the V-type structure like amylose-fatty acid complex, suggesting that oil could not enter the helical cavity of amylose to form complex. Furthermore, compared with CTS and ATS, oil-modified starches had higher shear resistance, lower viscosity and gelatinization enthalpy. Notably, Oil-CTS possessed excellent emulsion stability, with the potential application as an emulsion stabilizer. This study revealed oil modification as an innovative method to endow starch with high shear resistance, low gelatinization enthalpy and excellent emulsion stability to meet the demands of food industries.

Mechanochemical Transformations of Biomass into Functional Materials

Biomass is one of the promising alternatives to petroleum-derived materials and plays a major role in our fight against climate change by providing renewable sources of chemicals and materials. Owing to its chemical and structural complexity, the transformation of biomass into value-added products requires a profound understanding of its composition at different scales and innovative methods such as combining physical and chemical processes. In this context, the use of mechanochemistry in biomass valorization is currently growing owing to its potentials as an efficient, sustainable, and environmentally friendly approach. This review highlights the latest advances in the transformation of biomass (i. e., chitin, cellulose, hemicellulose, lignin, and starch) to functional materials using mechanochemical-assisted methods. We focused here on the methodology of biomass processing, influencing factors, and resulting properties with an emphasis on achieving functional materials rather than breaking down the biopolymer chains into smaller molecules. Opportunities and limitations associated this methodology were discussed accordingly for future directions.

Effect of micro- and nano-starch on the gel properties, microstructure and water mobility of myofibrillar protein from grass carp

This work evaluated the effect of micro- and nano-starch (MS and NS) on the gel properties of fish myofibrillar protein (MP). Both MS and NS could enhance MP gel performance in terms of breaking force, elasticity and water holding capacity (p < 0.05), with more significant effect from NS than MS. The difference between NS and MS in enhancement effect on MP gel is due to nano-size effect and different microstructures of MP/MS and MP/NS gels, with NS rather than MS contributing to the continuity of MP network. Synchrotron FTIR micro-spectroscopic images further verified that NS with large specific surface had good compatibility with MP, while MS was embedded in MP matrix with evident phase separation. Additionally, β-sheet still dominated the secondary structure of all gels, although adding both MS and NS could change molecular interactions, such as weakening ionic bonds and hydrogen bonds, and strengthening hydrophobic interactions.