Utilization of maltogenic α-amylase treatment to enhance the functional properties and reduce the digestibility of pulse starches

Mechanism of maltogenic α-amylase modification on barley granular starches spanning the full range of amylose

Amylopectin (AP)-only (APBS), normal (NBS), and amylose (AM) only (AOBS) barley starches were selected here to investigate catalysis pattern of maltogenic α-amylase (MA) on hydrolyzing AP and AM granular starches. MA shortened starch side chains with degree of polymerization (DP) 11-30. MA-treated APBS exhibited porous granular structures and dramatically increased degree of branching (DB, 17-20 %), and reduced ordered degrees, suggesting high hydrolysis and transglycosylation activities of MA. MA-treated NBS showed less pronounced porous structures and slightly increased DB (2-4 %), indicating high hydrolysis but low transglycosylation activities. AOBS displayed minimal changes in DB (0.2-0.3 %) and starch structures, implying low hydrolysis and transglycosylation activities. Therefore, MA preferred to attack the AP molecules with abundant glucan substrates with DP 11-30, while AM restricted MA activity likely by creating ineffective binding sites and undergoing rapid reorganization. These findings deepened the understanding of the mechanisms of MA in modifying granular starches with varying AM content.

Novel hydrothermal modification to alter functionality and reduce glycemic response of pea starch

Despite being an effective and clean-label method, heat-moisture treatment (HMT) is not commonly used for starch modification in industry due to the difficulty of scale-up. This study aimed to develop a novel method of using extrusion combined with high-temperature drying (EHTD) as an alternative to HMT for starch modification. Pea starch was subjected to extrusion at 37.5 % moisture level and with a low-temperature profile (≤ 65 °C), followed by immediate heating at 130 °C for 1 h. EHTD significantly damaged the granules, altered the X-ray diffraction pattern, and reduced the relative crystallinity of pea starch. Overall, EHTD-modified pea starch exhibited increased gelatinization temperatures and decreased gelatinization enthalpy change, lowered pasting viscosity and gel hardness, as well as enhanced enzymatic resistance than the native pea starch. More importantly, in a human feeding trial (n = 20 healthy participants) to monitor plasma glucose response over a period of 2 h after consuming water-boiled sample (35 g starch, dry basis), EHTD-modified pea starch exhibited 22 % reduction (p < 0.01) in plasma glucose incremental area under the curve as compared to the native counterpart. The results indicated that EHTD could be a new simple and clean-label method to produce functional and low-glycemic starch ingredients.

Structural and property characterization of low-molecular-weight novel reuterans synthesized from pea starch by Limosilactobacillus reuteri N1 GtfB with 4,6-α-glucanotransferase II activity

Promising novel α-glucanotransferases with starch-converting activity have recently emerged from the CAZy GH70 GtfB subfamily. In this study, we thoroughly investigated and elucidated the impact of the newly characterized 4,6-α-glucanotransferase II Limosilactobacillus reuteri N1 GtfB (LrN1 GtfB), which was capable of synthesizing linear (α1 → 6) and branched (α1 → 4,6) linkages, on the fine structure, rheology, and retrogradation properties of pea starch (PS). The results revealed that as the reaction time increased, the total (α1 → 6) linkages in linear chains and branching points of PS increased from 5.6 % to 18.7 %, the molecular weight decreased from 7.3 × 106 g/mol to 7.4 × 104 g/mol, and the percentage of short chains (DP ≤ 12) increased from 47.4 % to 92.7 %, thereby producing low-molecular-weight, short-clustered novel reuterans with new (α1 → 6) linkages in both linear chains and branches. Additionally, LrN1 GtfB-modified PS exhibited lower storage/loss modulus and weaker creep property, indicating a significant attenuation of the strength and rigidity of the modified gel structure. Moreover, products derived from pea starch and LrN1 GtfB exhibited notably low retrogradation properties. These findings provide insights into the potential application of GtfB-type α-glucanotransferases in starch-based products, thereby producing unique-structured α-glucans with versatile properties from starch.

Structural elucidation and functional characteristics of novel potential prebiotics produced from Limosilactobacillus reuteri N1 GtfB-treated maize starches

The recently characterized Limosilactobacillus reuteri N1 GtfB (LrN1 GtfB) from glycoside hydrolase family 70 is a novel 4,6-α-glucanotransferase acting on starch/maltooligosaccharides with high enzyme activity and soluble protein yield (in heterogenous system). In this study, the influence of the treatment by LrN1 GtfB on the fine structure and functional characteristics of three maize starches were furtherly investigated and elucidated. Due to the treatment of LrN1 GtfB, the starch molecules were transformed into reuterans containing linear and branched (α1 → 6) linkages with notably smaller molecular weight and shorter chain length. Moreover, the (α1 → 6) linkage ratios in the GtfB-modified high-amylose maize starch (GHMS)/normal maize starch (GNMS)/waxy maize starch (GWMS) increased by 18.3 %/12.6 %/9.0 % as compared to their corresponding controls. In vitro digestibility experiment revealed that the resistant starch content of GHMS, GNMS and GWMS increased by 16 %, 18 % and 25 % as compared to the starch substrates. Furthermore, the butyric acid yielded from GHMS, GNMS and GWMS in the in vitro fermentation experiments were 1.4, 1.5 and 1.4 times higher than those of commercial galactose oligosaccharides. These results indicated that the highly-branched short-clustered reuteran synthesized by LrN1 GtfB might serve as novel potential prebiotics, and provide insights for the synthesis of promising prebiotic dietary fiber from starch.

Important roles of coarse particles in pasting and gelling performance of different pulse flours under high-temperature heating

Dehulled pea, lentil, and faba bean grains were milled into flours with 0.5- to 2.5-mm sieves. As the particle size decreased, damaged-starch contents of the flours from the same pulse crop increased. At a holding temperature of 95 °C in RVA, peak and final viscosities and gelling ability of the flours generally increased as the particle size decreased. When the holding temperature increased from 95 to 140 °C, pasting viscosities of pea and lentil flours and gel hardness of lentil flours gradually decreased. In contrast, pasting viscosities and gel hardness of faba bean flours reached the highest values at 120 °C. The comparison of the pulse flours varying in particle size across the three market classes revealed that coarse particles comprising agglomerated starch, protein, and dietary fiber (i.e., particles of the second peak in the bimodal particle-size distribution curves) showed significant correlations with certain important functional properties of pulse flours.

Utilizing Synchrotron-Based X-ray Micro-Computed Tomography to Visualize the Microscopic Structure of Starch Hydrogels In Situ

This study aimed to visualize the microstructures of starch hydrogels using synchrotron-based X-ray micro-computed tomography (μCT). Waxy maize starch (WMS, 3.3% amylose, db), pea starch (PS, 40.3% amylose), and high-amylose maize starch (HMS, 63.6% amylose) were cooked at 95 and 140 °C to prepare starch hydrogels. WMS and HMS failed to form a gel after 95 °C cooking and storage, while PS developed a firm gel. At 140 °C cooking, HMS of a high amylose nature was fully gelatinized and generated a rigid gel with the highest strength. Both scanning electron microscopy (SEM) and μCT revealed the unique structural features of various starch hydrogels/pastes prepared at different temperatures, which were greatly affected by the degree of swelling and dispersity of the starches. As a nondestructive method, μCT showed certain advantages over SEM, including minimal shrinkage of the hydrogels, relatively simple sample preparation, and allowing for three-dimensional reconstruction of the hydrogel microstructure. This study indicated that synchrotron-based μCT could be a useful technique in visualizing biopolymer-based hydrogels.

Ultrasound-assisted starch hydrolyzing by alpha-amylase: Implementation of computational fluid dynamics, acoustic field determination, and rheology modeling

The study aimed to optimize the ultrasonic-assisted modification (UAM) of corn and potato starch by assessing the influence of ultrasound geometry, power, and frequency on the fluid flow for sonicated starch to achieve porous starch with a higher degree of hydrolyzing by α-amylase. This assessment was conducted through mathematical modeling and 3D computational fluid dynamics (CFD) simulations. The ultrasonic pressure field is determined by the solution of the non-linear Westervelt equation in the frequency domain. Then, the obtained field is utilized to simulate the dissipated power and flow field characteristics. According to the results obtained from the Rapid Visco Analyzer (RVA), it was observed that the peak and final viscosity of hydrolyzed sonicated starch were less than hydrolyzed native starch. This decrease in viscosity indicates a breakdown of the starch structure, leading to a more fluid-like consistency. The shear rate and shear stress data are used for rheology modeling. The fluid's viscosity is represented based on three models of Herschel-Bulkley, Casson, and Power law (Ostwald-de Waele). The magnitude of yield shear stress at low shear rates, the shear-thinning behavior, and the nearly Newtonian fluid nature at high shear rates are extracted from the viscosity models. The surfaces of the starch granules were analyzed using scanning electron microscopy (SEM) revealed that sonication treatments caused damage, cracks, and porosity on the surfaces of the starch granules which were prone to amylolytic enzymes. This indicates that the structural integrity of the granules was compromised and facilitated enzyme penetration. This study proposes that ultrasonication can be utilized to produce damaged starch, which is susceptible to hydrolysis by α-amylase. This approach holds the potential for reducing enzyme consumption in various industries.

Heat-moisture treatment to modify structure and functionality and reduce digestibility of wrinkled and round pea starches

Heat-moisture treatment (HMT) was employed to modify wrinkled pea (74.2 % and 76.5 % amylose) and round pea starches (35.9 % and 34.8 % amylose) at 35.0 % moisture, 110 or 130 °C, and 6 h. HMT increased the gelatinization temperatures and decreased the gelatinization enthalpy changes, reduced the pasting viscosities and gel hardness, and enhanced the enzymatic resistance of the pea starches in comparison with the native counterparts, with greater extents of changes observed for HMT at 130 °C overall. Although HMT decreased the relative crystallinity and elevated the proportion of amorphous conformation, the remaining double-helical crystallites in the modified samples showed improved thermal stability as revealed by differential scanning calorimetry (DSC). More importantly, the HMT-modified pea starches required a higher heating temperature of 120 °C, rather than 95 °C, in Rapid Visco Analyser to provide greater pasting viscosities and develop firmer gels, suggesting that the modified samples had stronger molecular entanglement than the native counterparts. Such molecular entanglement could also reduce enzymatic digestion of HMT-modified starches after boiling in water. With more diverse functional profiles and increased resistant starch (RS) contents (particularly for the HMT-modified wrinkled pea starches having 22.7-29.9 % RS), the HMT-modified pea starches could be promising new ingredients for food applications.

Enzymes Immobilized into Starch- and Gelatin-Based Hydrogels: Properties and Application in Inhibition Assay

The present work is a review of the research on using hydrogels based on natural biodegradable polymers, starch, and gelatin for enzyme immobilization. This review addresses the main properties of starch and gelatin that make them promising materials in biotechnology for producing enzyme preparations stable during use and storage and insensitive to chemical and physical impacts. The authors summarize their achievements in developing the preparations of enzymes immobilized in starch and gelatin gels and assess their activity, stability, and sensitivity for use as biorecognition elements of enzyme inhibition-based biosensors.

Maltogenic amylase: Its structure, molecular modification, and effects on starch and starch-based products

Maltogenic amylase (MAA) (EC3.2.1.133), a member of the glycoside hydrolase family 13 that mainly produces α-maltose, is widely used to extend the shelf life of bread as it softens bread, improves its elasticity, and preserves its flavor without affecting dough processing. Moreover, MAA is used as an improver in flour products. Despite its antiaging properties, the hydrolytic capacity and thermal stability of MAA can't meet the requirements of industrial application. However, genetic engineering techniques used for the molecular modification of MAA can alter its functional properties to meet application-specific requirements. This review briefly introduces the structure and functions of MAA, its application in starch modification, its effects on starch-based products, and its molecular modification to provide better insights for the application of genetically modified MAA in starch modification.

Deciphering the structural and functional characteristics of an innovative small cluster branched α-glucan produced by sequential enzymatic synthesis

Highly branched α-glucan (HBAG) proved to be a promising material as an osmotic agent in peritoneal dialysis solutions. However, high resistance of HBAG to amylolytic enzymes might be a potential drawback for peritoneal dialysis due to its high degree of branching (20-30 %). To address this issue, we designed a small-clustered α-glucan (SCAG) with a relatively low molecular weight (Mw) and limited branching. Structural characteristics revealed that SCAG was successfully synthesized by modifying waxy rice starch (WRS) using sequential maltogenic α-amylase (MA) and starch branching enzyme (BE). The Mw of SCAG was 1.40 × 10⁵ Da, and its (α1 → 6) bonds ratio was 8.93 %, which was below that of HBAG. A relatively short branch distribution was observed in SCAG (CL = 6.27). Short-range orderliness of WRS was reduced from 0.749 to 0.322 with the MABE incubation. Additionally, SCAG had an extremely low viscosity (~12 cP) and nearly no retrogradation. Although the resistance of SCAG to amylolytic enzymes was enhanced by 15.22 % compared with native WRS, the extent was significantly lower than that of HBAG in previous studies. These new findings demonstrate the potential of SCAG as a novel functional α-glucan in food and pharmaceutical applications.

Solid state malic acid esterification on fungal α-amylase treated corn starch: Design of a green dual treatment

For the first time, the current work applied fungal α-amylase treated corn starch in granular form to produce solid state malate-esterified starch (MES). The pores and channels created on the granules after the enzymatic modification could provide more possibilities for malic acid to esterify the starch, resulting in the increase of substitution degree (0.084) and reaction efficiency (86.6%) compared to NS. Based on the obtained results, the dual treatment significantly increased solubility, amylose content, and syneresis, but reduced transparency, viscosity, digestibility rate, and swelling power compared to those of NS. The occurrence of esterification onto starch chains was confirmed by FT-IR at 1720 cm^-1. Other techniques including SEM, XRD, and DSC were employed to examine changes in the structure of starch granules after applying each treatment. Also, the greenness of the combined modification (score: 77) was proved by using a new methodology named Eco-Scale.

Exploring the functional attributes and in vitro starch and protein digestibility of pea flours having a wide range of amylose content

In this study, ten pea flours covering a broad range of amylose content (37.2-77.6 %, dsb) were characterized for functional and nutritional properties. As the amylose contents increased, the starch contents of the pea flours showed a downward trend (r = -0.990, p < 0.001 in Pearson correlation) but their protein and total dietary fiber contents exhibited an upward trend (r = 0.915, p < 0.001 and r = 0.885, p < 0.001, respectively). A greater amylose content tended to increase starch gelatinization temperatures of the pea flours, which thus required a higher cooking temperature for pasting viscosity development and subsequent gel formation. An increased amylose level reduced in vitro starch digestibility of the cooked pea flours (r = -0.944, p < 0.001) but did not influence in vitro protein digestibility. The insightful findings will be valuable for utilizing the diverse pea lines to create new flour, starch, and protein ingredients.

Effect of Cooking Method and Enzymatic Treatment on the in vitro Digestibility of Cooked and Instant Chestnut Flour

Microwave treatment, roasting, boiling, and enzymatic treatment were used to prepare cooked and instant chestnut flour, and the in vitro digestibility were compared. Cooking gelatinized the starch and destroyed the granular and crystal structure, increasing starch digestibility. After enzymatic hydrolysis, starches were degraded by 20~24%, and the reducing sugar content of the instant flours increased by 79~94%. Starch digestibility was reduced after enzymatic hydrolysis, however, the estimated glycemic index (GI) increased to 65.1 ~ 77.7 due to the combined effect of increased reducing sugar and decreased starch hydrolysis in the instant flours. The chestnuts treated by 'boiling + enzymes' are still a medium GI food. These findings give guidance for the development of low GI cooked and instant chestnut flour.

Bioactives of Momordica charantia as Potential Anti-Diabetic/Hypoglycemic Agents

Momordica charantia L., a member of the Curcubitaceae family, has traditionally been used as herbal medicine and as a vegetable. Functional ingredients of M. charantia play important roles in body health and human nutrition, which can be used directly or indirectly in treating or preventing hyperglycemia-related chronic diseases in humans. The hypoglycemic effects of M. charantia have been known for years. In this paper, the research progress of M. charantia phytobioactives and their hypoglycemic effects and related mechanisms, especially relating to diabetes mellitus, has been reviewed. Moreover, the clinical application of M. charantia in treating diabetes mellitus is also discussed, hoping to broaden the application of M. charantia as functional food.