Understanding the granule, growth ring, blocklets, crystalline and molecular structure of normal and waxy wheat A- and B- starch granules

A novel starch from Trichosanthes kirilowii roots: A comparison of its composition, structure and physicochemical properties with conventional root starch

This study investigated the properties of a novel medicinal starch isolated from the roots of Trichosanthes kirilowii (TKRS). The multiscale structural and physicochemical properties of TKRS were characterized and compared with two common starches, sweet potato starch (SPS) and kudzu starch (KS), to elucidate the influence of structural characteristics on the physicochemical properties of these root starches. TKRS granules exhibited elliptical and irregular polygonal shapes, with the largest median particle size (14.48 μm). TKRS had a lower amylose content (15.03 %) and a lower molecular weight (8.40 × 107 g/mol). XRD analysis confirmed a C-type crystallinity pattern, with a higher crystallinity degree (21.51 %) and a high degree of short-range ordered structure. Further analysis of the chain length distribution revealed that TKRS contained a larger proportion of long-chain amylopectin. Compared to SPS and KS, TKRS showed a lower gelatinization temperature (72.65 °C) but a higher peak viscosity (7351 cP). Additionally, despite its relatively lower water retention capacity, TKRS exhibited higher storage modulus and loss modulus than conventional tuber starches. In vitro digestibility analysis indicated that TKRS had a lower rapidly digestible starch content and a higher resistant starch content, highlighting its potential for processing into healthy starch-based food products.

A comparative study of starch granule-associated proteins/lipids on short-term and long-term retrogradation of normal and waxy corn starches

To evaluate the contribution of starch granule-associated proteins/lipids (SGAPs/SGALs) to the short- and long-term retrogradation of starch, a comparative study was conducted using normal and waxy corn starches. Following the removal of SGAPs, peak viscosity (3504.71 cP) and breakdown viscosity (1659.20 cP) significantly increased, while pasting temperature (74.31 °C) significantly decreased, compared to SGALs-removed (3131.00 cP, 1229.80 cP, 75.46 °C) and native normal corn starches (2704.40 cP, 794.60 cP, 79.30 °C). Rheological profiles further revealed that the removal of SGAPs/SGALs effectively promoted the short-term retrogradation of amylose, as evidenced by larger hysteresis rings and higher consistency indices (K) in the SGAPs/SGALs-removed starch gel. While SGAPs removal also greatly facilitated amylopectin recrystallization and double helix structure aggregation than removal of SGALs, thereby significantly increased the retrogradation enthalpy (from 6.48 to 7.37 J g-1) and gel hardness (from 461.26 gf to 518.31 gf) in normal corn starch after 14 days of storage, while no notable differences were observed in their corresponding waxy counterparts after both treatments. In conclusion, SGAPs showed significant superiority over SGALs in accelerating both short- and long-term retrogradation of normal corn starch, while both had minimal impact on waxy corn starch.

Insight into formation and structure of wheat starch-lauric acid complexes by extrusion: Effect of plasma-activated water

The objective of this study is to examine how plasma-activated water (PAW) affects the formation of complexes between wheat starch (WS) and lauric acid (LA) during extrusion. The findings from various analysis, including complexing index, X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, and differential scanning calorimetry, revealed that PAW promoted the formation of WS-LA complexes during extrusion, resulting in a better long-range and short-range ordered structure, as well as higher gelatinization enthalpy. Consequently, PAW led to lower solubility, swelling power, gel property, and rapidly digestible starch content but higher resistant starch content. Notably, the promotional impact of PAW60 (distilled water underwent plasma treatment for 60 s) was greater than PAW120 (distilled water underwent plasma treatment for 120 s) and PAW180 (distilled water underwent plasma treatment for 180 s). This study provides an efficacious technique to enhance the formation of starch complexes, being of great value in starch-based functional foods.

Effects of ratios of A- and B-type wheat starch on liangpi (a starch gel food) quality and its potential mechanism

The fractionation and reconstitution method was employed to investigate the impact of different proportions of A-type (AS) and B-type (BS) wheat starch on the quality of liangpi and its potential mechanism, with traditional gluten-removed liangpi (RGL) as a control. The results demonstrated that a higher AS/BS ratio led to an increase in hardness, resilience, and chewiness. Moreover, the sensory scores for BS-dominated liangpi were significantly lower than those for AS-dominated liangpi, and liangpi with 60 % AS had the highest sensory scores. Additionally, as the AS/BS ratio increased, the G' and G″ values of the samples gradually rose, while the tan δ value exhibited a corresponding decrease. The morphological results showed that with the increase of AS/BS ratio, the microstructure of liangpi had larger but fewer pores. Furthermore, the XRD and FTIR analyses demonstrated an increase in ordered structures among starch granules with higher ratios of AS/BS, resulting in stronger hydrogen bonds in the AS-dominated liangpi. This study provides a comprehensive understanding of how the proportion of AS and BS influences the quality of liangpi, offering valuable insights for enhancing the quality of liangpi by adjusting the AS/BS ratio during the production process.

Effect of NaCl stress germination on microstructure and physicochemical properties of wheat starch

Germination can enhance the nutritional properties of wheat and improve its bioavailability, while simultaneously altering the microstructure of wheat starch, which further impacts its physicochemical characteristics. This work investigated the synergistic effects of germination and NaCl on the microstructure and physicochemical properties of wheat starch by applying a 60 mmol/L NaCl solution. The results indicated that germination significantly influenced both the chemical composition and microstructure of wheat starch, as evidenced by cracks and pores, variations in size, crystallinity, lamellar order, hydrogen bond disruption, branching degree, and molecular weight distribution. These changes affected the pasting and gel properties of the starch. The NaCl treatment enhanced enzyme activity, resulting in a higher phenolic content (4.70 mg GAE/g DW) at 48 h, rougher and irregular surfaces, smaller dimensions (D10 from 3.87 to 2.20 μm), and increased degree of heterogeneity. Over time, the NaCl-induced treatment led to a greater structural disruption, including reduced crystallinity (from 17.93 % to 14.95 %), damage the lamellar structure, and the breaking of hydrogen and glycosidic bonds. The germinated starch exhibited improved solubility and swelling power, thereby altering its pasting, gel, and thermal properties. Overall, this study provides valuable insights for the application of germinated wheat in food.

Molecular structure of enzyme-synthesized amylose-like chimeric isomaltomegalosaccharides and their encapsulation of the sulfasalazine prodrug

The glucoconjugation between linear chimeric α-(1→4)- and α-(1→6)-glucosidic segments exhibits functional properties throughout their structure. In this study, we enzymatically synthesized three new series of chimeric nonreducing isomaltomegalosaccharides (N-IMS-n/m), each featuring a constant n, α-(1→4)-segment (average degree of polymerization, DP = 22-25) at the nonreducing terminal, and varying m, α-(1→6)-main chain lengths (DP = 7-53). The synthesized compounds-N-IMS-25/7, N-IMS-24/19, and N-IMS-22/53-were compared to amylose (DP = 28) and previous samples of N-IMS-15/35 and D-IMS-28.3/13/3. D-IMS refers to a sugar with double α-(1→4)-segments at both the nonreducing and reducing ends. The binding affinity to the aromatic prodrug sulfasalazine (SZ) was assessed using a phase-solubility assay, followed by freeze-thawing. Wide-angle X-ray scattering revealed B-type crystalline patterns in bulk, and the crystallinity generally reduced with the increasing α-(1→6) segment. Interestingly, the B-type crystal structure was maintained even after SZ encapsulation, in contrast to the more common transition to V-type crystals upon drug encapsulation. Multi-angle dynamic light scattering and small-angle X-ray scattering revealed an intricate solution-state morphology, both in the absence and presence of SZ. Glucoconjugation aids in maintaining structural organization and integrity, even after the incorporation of the large SZ molecule.

Insight into characteristics in rice starch under heat- moisture treatment: Focus on the structure of amylose/amylopectin

Heat-moisture treatment (HMT) could improve the structure and physicochemical characteristics of rice starch, the structural changes of amylose and amylopectin needed to be further investigated. Hence, the starch, amylose and amylopectin were modified by HMT with different moisture contents (MC). As MC increased, starch granules became irregular, amylose appeared molten while amylopectin was less damaged. The crystal structure of starch was disrupted by HMT. The increase in the double helix structure of amylose exhibited more drastic tendency towards molecular rearrangement than amylopectin did. In addition, the reduced proportion of amylopectin A chain could affect the rearrangement of amylose. The solubility and pasting temperature improved, but the enthalpy decreased. Moderate MC (20 %, 25 %) could enhance the viscosity and dynamic viscoelasticity. HMT promoted the conversion of RDS to RS, which was significantly increased by 85.26 % at HMT-40 %. These findings contributed to a better understanding of the mechanisms by which HMT affected starch.

Strategies and Methodologies for Improving Toughness of Starch Films

Starch films have attracted increasing attention due to their biodegradability, edibility, and potential use as animal feed from post-products. Applications of starch-based films include food packaging, coating, and medicine capsules. However, a major drawback of starch-based films is their brittleness, particularly under dry conditions, caused by starch retrogradation and the instability of plasticizers. To address this challenge, various strategies and methodologies have been developed, including plasticization, chemical modification, and physical reinforcement. This review covers fundamental aspects, such as the microstructures, phase transitions, and compatibility of starch, as well as application-oriented techniques, including processing methods, plasticizer selection, and chemical modifications. Plasticizers play a crucial role in developing starch-based materials, as they mitigate brittleness and improve processability. Given the abundance of hydroxyl groups in starch, the plasticizers used must also contain hydroxyl or polar groups for compatibility. Chemical modification, such as esterification and etherification, effectively prevents starch recrystallization. Reinforcements, particularly with nanocellulose, significantly improved the mechanical properties of starch film. Drawing upon both the literature and our expertise, this review not only summarizes the advancements in this field but also identifies the limitations of current technologies and outlines promising research directions for future development.

The Mechanism Underlying the Increase in Bread Hardness in Association with Alterations in Protein and Starch Characteristics During Room-Temperature Storage

Hardness constitutes one of the primary performance indices of bread. However, there is scarce literature regarding the study of the mechanisms of increased hardness in different breads. In this paper, the hardness and retrogradation rates of five popular brands of bread (DaliGarden, Mankattan, MianLunSi, TOLY, and ZhengMao) in China during storage at room temperature were determined, and the mechanism of increased hardness was revealed by the results in terms of Fourier transform infrared spectroscopy (FTIR), disulfide bonds, 13C solid-state nuclear magnetic resonance (NMR), X-ray diffraction, and differential scanning calorimetry (DSC). The results showed that the sequence for the degree of hardness increase among the five bread brands was DaliGarden > TOLY >Mankattan > MianLunSi > ZhengMao. The bread hardness was likely associated with the gliadin content; the more gliadin, the higher the hardness of the bread. All bread hardness values underwent a rapid increase during storage at room temperature. The hardness level of the bread preferred by Chinese individuals was approximately 105 g, and the hardness of the TOLY bread underwent relatively minor changes during storage at room temperature. The disulfide bond content of all breads apart from Mankattan decreased during storage at room temperature. The increase in the hardness of the bread was attributed to the ordered configuration of the amylopectin structures resulting from water evaporation. The results given in this paper offer a practical hardness index to control the quality of bread. This study is expected to contribute to better quality control and optimization in bread production, enhancing consumers' satisfaction and extending products' shelf lives.

Rheological, textural, and pasting properties of A- and B-type wheat starches in relation to their molecular structures

A- and B-type wheat starches have significant differences in rheological, textural, and pasting properties; however, the structure-property relationship is not fully revealed. Herein, the physicochemical characteristics and molecular structures of A- and B-type starches isolated from three wheat varieties with different apparent amylose contents (2.41%-27.93%) were investigated. A-type starches exhibited higher pasting viscosities, relative crystallinity, onset gelatinization temperatures, and enthalpies, while B-type starches had wide gelatinization temperature ranges. B-type starches had lower resistant starch contents than their A-type counterparts, but B-type starches formed more stable gels and had a lower tendency to retrograde, resulting in lower hardness, storage (G') and loss (G'') moduli but higher tan δ values. A-type starches had lower contents of short amylose (100 ≤ X < 1000) and amylopectin chains (DP 6-12) than B-type. These findings elucidated the differences in molecular structures between A- and B-type starches, which can contribute to their effective application.

Relationship between internal structure and in vitro digestibility of A- and B-type wheat starch revealed by chemical surface gelatinization

In this study, the properties of remaining starch granules obtained with different degrees of exfoliation were explored by removing the outer layers of A- and B-type wheat starch (AWS and BWS) granules with chemical surface gelatinization. SEM images revealed significant morphological variations with increasing exfoliation. CLSM and amylose content analysis indicated a predominance of lipid complexes in the outer granule layers, particularly in BWS. The structural characteristics of AWS and BWS were analyzed using PLM, XRD, FT-IR and DSC, verifying the conclusion of the alternation of starch crystalline and amorphous zone. And the amorphous regions are proportionally higher in the inner starch layer. Moreover, raw AWS and BWS granules were more easily digested from the outside in, with the RS content decreasing from 80.65 % to 66.92 % and 49.06 % to 45.01 %, respectively. The RS content of cooked WS were affected by the internally structures, particularly lipid content (11.46 % - 19.09 %) in BWS outer layers and amylose content (13.59 % - 19.43 %) in the inner layers. These results revealed the internal radial structural differences and digestibility patterns of AWS and BWS granules.

The accumulation and properties of starch are associated with the development of nutrient transport tissues at grain positions in the spikelet of wheat

A wheat spikelet accumulates several grains, which show significant positional effects in terms of size, weight, and material accumulation. However, few studies have investigated whether starch accumulation in these grains is related to the development of vascular bundles. This study analyzed the correlation between the morphology of vascular bundles and starch accumulation. The area of nutrient transport tissues in G1 and G2 was greater than that in G3 and G4. The proportion of A-type starch granules in G3 and G4 was significantly greater than that in G1 and G2, with the greatest proportion of C-type starch granules occurring in G2. The short-order structure of the starch granules in G1 was more developed than that in the other samples, and the crystalline region in G2 was the greatest. The area of the nucellar projection and vascular bundle was positively correlated with C- or B-type starch granules but negatively correlated with A-type starch granules and swelling power. The area of wall ingrowth was positively correlated with the proportion of branch chains (DP 25-36 and DP 37-100), and negatively correlated with the starch content. The above results indicate that the developmental status of the vascular bundles in the wheat grains controls the accumulation, composition, and characteristics of starch in the endosperm. The novelty of this study lies in elucidating the grain position effect on starch accumulation in wheat grains. This provides a new perspective for agricultural production, aiming to enhance the accumulation of carbohydrates in inferior grains, thereby facilitating their transformation into superior grains.

Freezing rate's impact on starch retrogradation, ice recrystallization, and quality of water-added and water-free quick-frozen rice noodles

The study evaluated the effect of freezing rate on the quality of water-added quick-frozen rice noodles and water-free quick-frozen rice noodles. Results indicated that the retrogradation enthalpy, relative crystallinity, freezable water content, and cooking loss of water-added quick-frozen rice noodles were higher than those of water-free quick-frozen rice noodles with increasing storage time. Furthermore, ice recrystallization accelerated the deterioration of the quality of the rice noodles, resulting in the enlargement of the pores within the rice noodles and the formation of many pores on the surface. This phenomenon was particularly evident in the rice noodles of Y-40 °C (freezing with water at -40 °C) and Y-60 °C (freezing with water at -60 °C). After 28 days of frozen storage, the hardness increased by 83.83 % for rice noodles of Y-20 °C (freezing with water at -20 °C), while the hardness decreased by 51.68 % and 45.80 %, respectively, for rice noodles of Y-40 °C and Y-60 °C. Consequently, the impact of the freezing rate on the quality of water-added quick-frozen rice noodles is more pronounced than that of water-free quick-frozen rice noodles. Moreover, a higher freezing rate can delay the deterioration of the quality of frozen rice noodles by postponing starch retrogradation and inhibiting ice recrystallization.

Fine molecular structure and digestibility changes of potato starch irradiated with electron beam and X-ray

The change of digestibility of starch irradiated with different types from the perspective of fine structure is not well understood. In this work, the change of internal structure, molecular weight and chain-length distribution, helical structure, lamellar structure, fractal structure and digestibility of native and treated potato starch with electron beam and X-ray was analyzed. Two irradiations caused the destruction of internal structure, the disappearance of growth rings and increase of pores. Irradiation degraded starch to produce short chains and to decrease molecular weight. Irradiation increased double helical content and the thickness and peak area of lamellar structure, resulting in the reorganization of amylopectin and increase of structure order degree. The protected glycosidic linkages increased starch resistance to hydrolase attack, thereby enhancing the anti-digestibility of irradiated starch. Pearson correlation matrix also verified the above-mentioned results. Moreover, X-ray more increased the anti-digestibility of starch by enhancing ability to change fine structure.

Optimization of the morphological, structural, and physicochemical properties of maize starch using straw returning and nitrogen fertilization in Northeast China

The combination of straw returning and nitrogen (N) fertilization is a popular tillage mode and essential strategy for achieving stable yield and high quality. However, the optimal combination strategy and the influence of tillage mode on the morphological, crystalline, and molecular structures of maize starch remain unclear. We conducted a long-term field experiment over 7 years in Northeast China using two tillage modes, rotary tillage with straw returning (RTS) and plow tillage with straw returning (PTS), and four N application rates. The relative crystallinity, 1045/1022 cm-1 value, and B2 and B3 chains of maize starch were higher under RTS than under PTS, resulting in increased stability of starch and improvements in gelatinization enthalpy and temperature. The surface of the starch granules induced by N fertilizer was smoother than that under the N0 (0 kg N ha-1) treatment. The proportion of amylose content, solubility, swelling power, and light transmittance increased under N2 (262 kg N ha-1) treatment, along with improvement in starch pasting properties. These results suggest that RTS combined with N2 treatment can regulate the morphological, structural, and physicochemical characteristics of maize starch, providing an essential reference for improving the quality of maize starch from an agronomic point of view.

Transcriptome analysis reveals the mechanism of nitrogen fertilizers in starch synthesis and quality in waxy and non-waxy proso millet

Recent findings suggest that optimal application of nitrogen fertilizers can effectively improve the quality of proso millet (PM). Here, we aimed to investigate the pathways associated with starch synthesis and metabolism to elucidate the effect and molecular mechanisms of nitrogen fertilization in starch synthesis and properties in waxy and non-waxy PM varieties using transcriptomic techniques. Co-expression network analysis revealed that the regulation of starch synthesis and quality in PM by nitrogen fertilizer mainly occurred in the S2 and S3 stages during grain filling. Nitrogen fertilization inhibited glycolysis/gluconeogenesis and starch biosynthesis in grains, but increased starch degradation to maltose and dextrin and then to glucose. Moreover, nitrogen fertilization increased starch accumulation by upregulating the expression of SuS and malZ genes, thereby increasing the total starch content in grains. In contrast, nitrogen fertilization suppressed the expression of GBSS gene and decreased amylose content in PM grains, resulting in a relatively higher crystallinity, light transmittance, and breakdown viscosity in the two PM varieties. Overall, these results provided transcriptomics insights into the molecular mechanisms by which nitrogen fertilization regulates starch quality in PM, identified key genes that associated with the starch properties, and provided new insights into the quality cultivation of PM.

Effects of different food ingredients and additives on the digestibility of extruded and roller-dried maize starch and its application in low glycemic index nutritional formula powder

BACKGROUND

Complex interactions that occur among starch, protein, and fat during food processing affect the taste, texture, and digestibility of starch-based food. The physicochemical properties of starch, in particular its slow digestibility, are greatly influenced by processing techniques such as extrusion and roller-drying. This study investigated the effects of various food ingredients and additives on the digestion properties of maize starch treated with extrusion and roller drying. It designed a nutritional formula to develop low glycemic index products.

RESULTS

The extruded group containing raw maize starch, soybean protein isolate, soybean oil, lecithin and microcrystalline cellulose in the ratio of 580:250:58:20:3 had the best slow digestion properties. Nutritional formulas were designed at the above ratio, with supplements including calcium casein peptide, multi-vitamins, sodium ascorbate, fructooligosaccharides, xylitol, and peanut meal. The sample containing 10% peanut meal and a 1:3 ratio of fructooligosaccharides and xylitol additions obtained the highest sensory evaluation scores. An obvious slow digestion effect was observed in samples produced from the optimal formula.

CONCLUSION

The results of the present study could contribute to the development and production of a low glycemic index, nutritional powder. © 2023 Society of Chemical Industry.

Comparison of the fine structure and physicochemical properties of proso millet (Panicum miliaceum L.) starch from different ecological regions

Field experiments were conducted to evaluate the morphology, granule size, fine structure, thermal properties, and pasting properties of starch from a waxy (139) and a non-waxy (297) varieties of proso millet grown in Yulin (YY) and Yangling (YL). Compared with the starches from the two varieties grown in YY, the starches from the two varieties grown in YL exhibited higher relative crystallinities, 1045/1022 cm-1 ratio, and amounts of amylopectin long branch chains (APL) but lower 1022/995 cm -1 ratio, amounts of amylopectin short branch chains (APs), and APs/APL ratios. Starches from YL also synthesized long branch-chain amylopectin to enhance intermolecular interactions and form a stable granular structure, which resulted in increased starch gelatinization temperature, enhanced shear resistance, and reduced setback viscosity. Starch from the waxy (139) variety has good application prospects in the food industry because of its high gelatinization temperature and light transmittance and low setback value, which can be ascribed to its extremely low amylose content, polydispersity index, high molecular weight, and dispersed molecular density. It may serve as a reference for applying proso millet starches in the food industry and developing breeding programs to improve starch quality.

Regulation of multi-scale structures and retrogradation property of A- and B-type wheat starch granules with maltogenic α-amylase

Maltogenic α-amylase (MA) is widely used to modify starch for improving properties. In this work, A- and B-type starches were separated from wheat completely and submitted to MA hydrolysis. Firstly, research in morphological features (SEM) suggested that MA treatment did not destroy the granule integrity. Next, crystalline features from XRD and SAXS assay showed that MA treatment did not change the crystal form, but deceased crystalline sheet (dc) and amorphous sheet (da) thickness in both modified starches. And amorphous sheet was more severely destroyed at higher MA dosage than crystalline sheet. Then changes in molecule structure (HPAEC) showed that MA mainly acted on sides chains with degree of polymerization 12-24 in amylopectin for both starches, resulting in a reduce in peak, trough, and final viscosity obtained from RVA assay. At last, RVA and DSC assay showed that the short-term and long-term retrogradation were retarded in both modified starches. This range of techniques covered changes in multi-scale structures and retrogradation property resulted from MA treatment on both starches, which provided references for studying the changes in structures and properties of MA modified starch granules and provided an important method for retarding retrogradation of starchy foods without gelatinization processing.

Starch granules and their size distribution in wheat: Biosynthesis, physicochemical properties and their effect on flour-based food systems

Starch is a vital component of wheat grain and flour, characterized by two distinct granule types: A-type starch (AS) with granules larger than 10 µm in diameter, and B-type starch (BS) with granules measuring no more than 10 µm in diameter. This review comprehensively evaluates the isolation, purification, and biosynthesis processes of these types of granules. In addition, a comparative analysis of the structure and properties of AS and BS is presented, encompassing chemical composition, molecular, crystalline and morphological structures, gelatinization, pasting and digestive properties. The variation in size distribution of granules leads to differences in physicochemical properties of starch, influencing the formation of polymeric proteins, secondary and micro-structures of gluten, chemical and physical interactions between gluten and starch, and water absorption and water status in dough system. Thus, starch size distribution affects the quality of dough and final products. In this review, we summarize the up-to-date knowledge of AS and BS, and propose the possible strategies to enhance wheat yield and quality through coordinated breeding efforts. This review serves as a valuable reference for future advancements in wheat breeding.

Starch Structure of Raw Materials with Different Amylose Contents and the Brewing Quality Characteristics of Korean Rice Beer

This study aimed to explore suitable processing materials for rice beer (RB) production by analyzing the starch structure of the raw materials utilized for brewing beer and the quality characteristics of RB. We used malt, employing the Heugho cultivar as the main ingredient, and produced beer containing 30% rice. The regular amylose-containing cultivars Samgwang (SA) and Hangaru (HA) and the high-amylose-containing cultivar Dodamssal (DO) were used as adjuncts. Distribution of the short molecular chains of the starch amylopectin was the highest for SA and malt at 29.3% and 27.1%, respectively. Glucose content was the highest in the wort prepared with 100% malt and 30% SA + 70% malt. The alcohol content in SA RB and HA RB was higher than that in beer prepared with 100% malt. DO RB had the least bitterness and volatile components, such as acetaldehyde and ethyl acetate. The three rice cultivars tested in this study are suitable as starch adjuncts for RB production. The characteristics of RBs varied depending on the molecular structure of the ingredients, irrespective of their amylose contents. SA could be considered a craft beer with quality characteristics and rich flavor components, similar to 100% malt beer, compared to other RBs.

Structural, rheological, pasting, and digestive properties of wheat A-starch: Effect of outshell removal combined with annealing

Wheat A- starch was subjected to single and combined CaCl₂ and annealing (ANN) treatments. The influence of the treatment on wheat A- starch's structural, rheological, pasting, and digestive characteristics were studied. The results indicated that the application of CaCl₂ treatment caused the removal of the outer layer of wheat A-starch, disrupted the integrity of the growth ring structure, and lowered the molecular weight of amylopectin and relative crystallinity. Meanwhile, the application of outshell removal combined with ANN treatment led to significant damage to the starch granules, resulting in a marked reduction in relative crystallinity, as well as the molecular weight of amylopectin and amylose. However, no changes were found in the non-Newtonian pseudoplastic behavior of starch after single or combined treatments. Furthermore, the combination of outshell removal and annealing treatment resulted in a decreased peak viscosity as well as trough viscosity of starch. Moreover, long-time ANN treatment had the potential to improve the resistant starch (RS) content of deshell starch.

The alterations in granule, shell, blocklets, and molecular structure of pea starch induced by ultrasound

Understanding the alterations to starch multi-scale structure induced by ultrasound treatment can help in determining the effective application of ultrasound in functional-starch preparation. This study aimed to comprehensively characterize and understand the morphological, shell, lamellae, and molecular structures of pea starch granules treated by ultrasound under different temperatures. Scanning electron microscopy and X-ray diffraction analyses showed that UT (ultrasound treatment) did not change C-type of crystalline, but caused a pitted surface and endowed a looser structure and higher enzyme susceptibility as the temperature increased above 35 °C for pea starch granules. Fourier transform infrared spectroscopy and small-angle X-ray scattering analyses revealed that UT reduced the short-range ordering and increased the thickness of semi-crystalline and amorphous lamellae by inducing starch chain depolymerization, which was manifested by molecule weight and chain length distribution analysis. The sample ultrasound-treated at 45 °C had the higher proportion of B2 chains compared with the other ultrasound-treated samples because the higher ultrasonic temperature altered the disruption sites of starch chains.

Physicochemical properties and molecular structure of starches from different wheat varieties and their influence on Chinese steamed bread

Starch is one of the key factors for the texture of Chinese steamed bread (CSB). In this study, the molecular structures and physicochemical properties of starches from 11 wheat varieties with amylose content (AC) of 1.75%-28.79% were investigated. Northern style CSB was made using these wheat varieties to explore the structure-property-quality relationship of starches. AC was negatively correlated with the pasting and gelatinization properties. The relative crystallinity (RC) had a negative correlation with AC but a positive correlation with gelatinization. The molecular structure results from the fluorophore-assisted capillary electrophoresis spectrophotometer indicated that the length of short amylopectin chains (β_Ap,i ) was positively correlated with hot paste and cool paste viscosities. The amount of medium amylopectin chains (h_Ap,iii ) was positively correlated with peak and breakdown viscosities but negatively correlated with setback viscosity. The h_Ap,iii had positive correlations with gelatinization temperatures and RC. The amount of long amylopectin chains (h_Ap,v ) had a positive correlation with peak temperature. For the CSB texture, β_Ap,i had negative correlations with hardness and chewiness, whereas had a positive correlation with resilience. The h_Ap,iii was negatively correlated with springiness and resilience. The h_Ap,v was negatively associated with resilience. PRACTICAL APPLICATION: Starch has a vital role in wheat flour products. Clarifying the structure-property-quality relationship of starches will help illuminate the role of starch molecular structure in CSB production and provide valuable information for the control of CSB quality. It also provides a significant reference for wheat breeding.

Variation in Wheat Quality and Starch Structure under Granary Conditions during Long-Term Storage

As a globally distributed cereal, wheat is an essential part of the daily human dietary structure. Various changes in nutrient composition and starch structure can reflect the quality of wheat. In this study, we carried out a series of measurements to reveal the levels of wheat quality during long-term storage. We found that the deterioration of wheat was apparent after two years of storage: (1) the content of fatty acid increased from 12.47% to 29.02%; (2) the malondialdehyde content increased to 37.46%; (3) the conductivity significantly increased from 35.71% to 46.79%; and (4) other indexes, such as the amylopectin content, peak viscosity, and disintegration rate, increased noticeably during storage. Moreover, SEM images revealed a certain degree of damage on the surface of starch granules, and an X-ray diffraction (XRD) analysis showed A-type crystalline starch of wheat. Additionally, FTIR spectra suggested that the ratio of amylose and amylopectin decreased with a decreasing content of amylose and increasing content of amylopectin. The ratio of amylose and amylopectin can lead to variations in wheat machining characteristics. Therefore, wheat should be kept at an average of 20 °C with safe water content for less than two years to maintain reasonable quality.

The structure-glycemic index relationship of Chinese yam (Dioscorea opposita Thunb.) starch

Yam (Dioscorea opposita Thunb.) is an important functional food in Asia. Yam starch usually has a low glycemic index. What is the structure requirement of starch to obtain a low glycemic index remains unknown. In order to understand the structure-glycemic index relationship, six yam starches from various regions with apparent structure difference were analyzed. Chinese yam starch (CYS) showed the lowest glycemic index. It presented as oval or round granules. Meanwhile, CYS showed a distinct A-type crystal structure while the others presented C-type crystal structure. The largest crystallinity, R_w, M_w/M_n, RS level, RS + SDS level, and the lowest peak viscosity, trough viscosity and C_∞ values were found for CYS. These data explained the lowest glycemic index of CYS. The above results suggested that CYS was a good neutraceutical candidate and could be used in the diet of diabetes population.

Structure and genetic regulation of starch formation in sorghum (Sorghum bicolor (L.) Moench) endosperm: A review

This review focuses on the structure and genetic regulation of starch formation in sorghum (Sorghum bicolor (L.) Moench) endosperm. Sorghum is an important cereal crop that is well suited to grow in regions with high temperatures and limited water resources due to its C4 metabolism. The endosperm of sorghum kernels is a rich source of starch, which is composed of two main components: amylose and amylopectin. The synthesis of starch in sorghum endosperm involves multiple enzymatic reactions, which are regulated by complex genetic and environmental factors. Recent research has identified several genes involved in the regulation of starch synthesis in sorghum endosperm. In addition, the structure and properties of sorghum starch can also be influenced by environmental factors such as temperature, water availability, and soil nutrients. A better understanding of the structure and genetic regulation of starch formation in sorghum endosperm can have important implications for the development of sorghum-based products with improved quality and nutritional value. This review provides a comprehensive summary of the current knowledge on the structure and genetic regulation of starch formation in sorghum endosperm and highlights the potential for future research to further improve our understanding of this important process.

Impact of solvent polarity on the morphology, physicochemical properties, and digestibility of A-type resistant starch particles

Resistant starch particles (RSP) formed by antisolvent precipitation method has attracted much attention as a functional food ingredient having beneficial effects on obesity and diabetes. However, the effect of solvent polarity on the physicochemical properties and digestibility of RSP remains unclear. Here, n-propanol, isopropanol, acetone, and ethanol were employed as antisolvents to prepare RSP. The width and length of the resulting RSP decreased from 0.87 μm to 0.59 μm and from 2.56 μm to 1.31 μm, respectively, upon increasing the solvent polarity, while dramatically decreasing their crystallinity and the gelatinization enthalpy from 80.5% to 62.3% and from 67.9 ± 14.4 J/g to 41.5 ± 8.3 J/g, respectively, suggesting that solvent polarity is critical factor determining morphology, crystallinity, and thermostability of RSP. Furthermore, the level of resistant starch in RSP was found to be inversely proportional to the degree of solvent polarity, which would provide a useful means for modulating the digestibility of RSP.

Heat-moisture modified blue wheat starch: Physicochemical properties modulated by its multi-scale structure

Blue wheat starch was modified by heat-moisture treatment (HMT) with varying moisture contents (MCs). Changes in physicochemical properties were evaluated on the basis of its multi-scale structure. Following HMTs with MC below 30 %, the starch remained brighter and presented total phenolics content up to 0.20 mg/g. As treating MC increased, structural disruptions became more pronounced, which were characterized by crystallinity loss, lamellae's loosening, hydrogen bonding breakage, and debranching. Furthermore, HMTs decreased the proportion of external A chains of amylopectin. Concomitantly, modified starches showed progressively increased transition temperatures but decreased enthalpy values. Despite the swelling power decrease, HMTs with MC of 15 % showed markedly higher peak viscosity than control, as a result of the more compact semi-crystalline lamellae and homogenous electron distribution. Besides, all HMT-starches showed lowered breakdown and setback. This novel modified starch would be promising ingredients for modulating the viscoelasticity of healthy anti-staling staple foods.

Study of Noodle Quality Based on Protein Properties of Three Wheat Varieties

Waxy wheat offers unique benefits in food processing, including improving the smoothness and performance of the product. However, waxy wheat is not yet commercially available. The protein characteristics, including the protein content, subunit distribution, secondary structure, chemical interactions, and microstructure of the gluten, were explored to realize the full potential of waxy wheat. The results showed that the noodles prepared from waxy wheat had a gentle and glutinous texture compared with GY2018 and YM13. Partial-waxy and waxy wheat had a lower gluten index and glutenin macropolymer (GMP) content than GY2018, indicating a reduced gluten strength. Confocal laser scanning microscopy (CLSM) images showed that the starch granules were not securely attached to the partial-waxy and waxy wheat protein matrix. In addition, the waxy protein chains appeared more elongated and they weakened the protein network. In particular, HMW-GS subunit 2 + 12 may be the essential cause of the weak dough from SKN1. Compared with GY2018 and YM13, SKN1 had the highest number of free sulfhydryl groups. Rather than ionic bonds, hydrophobic interactions increased the gluten network in GY2018, YM13, and SKN1. The weak molecular forces in the gluten will result in a soft noodle texture.

Physicochemical properties of A- and B-type granules isolated from waxy and normal hull-less barley starch

Large A-type and small B-type starch granules separated from waxy and normal hull-less barley starches were investigated for their physicochemical properties. Hull-less barley starch granules were covered by a membrane composed mainly of phospholipids. Channels of waxy A- and B-type granules were rich in proteins and phospholipids. Compared with A-type starch, B-type starch exhibited higher specific surface area, volume and average diameter of mesopores. Waxy A-type granules exhibited the higher peak, breakdown, final and setback viscosity than did B-type granules, while normal A-type granules showed the lower peak, breakdown, final viscosity and the higher setback viscosity than did B-type granules. B-type starch gels with lower storage modulus exhibited a less elastic gel network structure and retrograded more slowly. Moreover, in vitro hydrolysis of starch showed that the B-type granules exhibited a higher hydrolysis extent and rate than the A-type granules in the first stage, which was consistent with higher initial α-amylase binding ability of B-type granules. The study showed that the A-type and B-type starch separated from waxy and normal hull-less barley exhibited very different physicochemical properties.

A review of wheat starch analyses: Methods, techniques, structure and function

Wheat starch has received much attention as an important source of dietary energy for humans, an interesting carbohydrate and a polymeric material. The understanding of the structure and function of wheat starch has always been accompanied by newer technological tools. On the one hand, the general knowledge of wheat starch is constantly being enriched. On the other hand, an increasing number of studies are trying to add new insights to what is already known from two frontier perspectives, namely, wheat starch supramolecular structures and wheat starch fine structures (CLDs). This review describes the structure and function of wheat starch from the perspective of wheat starch analysis techniques (instruments).