Properties and antimicrobial activity of silver carp (Hypophthalmichthys molitrix) skin gelatin-chitosan films incorporated with oregano essential oil for fish preservation

The Antibacterial Activity and Mechanisms of a Mixed Bio-Preservative on the Bacillus Stains in Crab Roe Sauce

Crab roe sauce (CRS) is prone to spoilage due to microbial contamination. Therefore, this study aimed to investigate the inhibitory effects and mechanisms of a mixed bio-preservative (0.025% ε-polylysine hydrochloride (ε-PL) + 0.01% nisin (NS) + 0.01% tea polyphenols (TPs)) on the specific spoilage bacteria (SSB) in CRS. First, the SSB in CRS were isolated and identified by 16S rRNA sequencing. Two isolates were selected as representative strains based on their enzymatic spoilage potential and spoilage capability in CRS. By comparing the inhibition zones, ε-PL, NS, and TPs were selected from five conventional bio-preservatives (ε-PL, NS, TPs, grape seed extract (GSE), and rosemary extract (RE)) to prepare the mixed bio-preservative. The results showed that the minimum inhibitory concentration (MIC) of the mixed bio-preservative against Bacillus pumilus and Bacillus subtilis was 56.3 µg/mL. The growth curves and cell viability tests revealed that the mixed bio-preservative reduced the viability of both strains. The conductivity, alkaline phosphatase activity, and nucleic acid and soluble protein leakage indicated that the mixed bio-preservative disrupted the integrity of the cell walls and membranes of the two isolates in a concentration-dependent manner. Scanning electron microscopy further confirmed the damage to the cell membranes of the two isolates by the mixed bio-preservative. Overall, the mixed bio-preservative exhibited excellently inhibitory effects on the SSB and could be a promising method for the preservation of CRS.

A review of advancements in chitosan-essential oil composite films: Better and sustainable food preservation with biodegradable packaging

In response to the environmental pollution caused by non-degradable and non-recyclable plastic packaging films (PPFs) and the resulting health concerns due to the migration of microplastics into food, the development of biodegradable food packaging films has gained great attention. Chitosan has been extensively utilized in the food industry owing to its abundant availability, exceptional biocompatibility, degradability, and antimicrobial properties. Chitosan-essential oil composite films (CEOs) represent a promising avenue to replace conventional PPFs. This review provides an overview of the advancements in CEOs over the past decade, focusing on the effects of essential oils (EOs) on CEOs in terms of antimicrobial activity, antioxidant effect, gas barrier, light barrier, and mechanical properties. It also offers insights into the controlled release of EOs in CEOs and summarizes the application of CEOs in fresh food preservation.

Microencapsulation to Harness the Antimicrobial Potential of Essential Oils and Their Applicability in Dairy Products: A Comprehensive Review of the Literature

This literature review explores cutting-edge microencapsulation techniques designed to enhance the antimicrobial efficacy of essential oils in dairy products. As consumer demand for natural preservatives rises, understanding the latest advancements in microencapsulation becomes crucial for improving the shelf life and safety of these products. The bibliometric analysis utilized in this review highlighted a large number of documents published on this topic in relation to the following keywords: essential oils, AND antimicrobials, AND dairy products, OR microencapsulation. The documents published in the last 11 years, between 2013 and 2023, showed a diversity of authors and countries researching this topic and the keywords commonly used. However, in the literature consulted, no study was identified that was based on bibliometric analysis and that critically evaluated the microencapsulation of essential oils and their antimicrobial potential in dairy products. This review synthesizes findings from diverse studies, shedding light on the various encapsulation methods employed and their impact on preserving the quality of dairy goods. Additionally, it discusses the potential applications and challenges associated with implementation in the dairy industry. This comprehensive analysis aims to provide valuable insights for researchers, food scientists, and industry professionals seeking to optimize the use of essential oils with antimicrobial properties in dairy formulations.

Gelatin/dextran active films incorporated with cinnamaldehyde and α-tocopherol for scallop (Patinopecten yessoensis) adductor muscle preservation

Scallops are rich in eicosapentaenoic acid (EPA) and docosahexaenoic acid but perishable due to their microbial growth and lipid oxidation. In this study, gelatin/dextran films containing cinnamaldehyde and α-tocopherol (0% + 0%, 0.3% + 0.3%, 0.6% + 0.6%, 0.9% + 0.9%, and 1.2% + 1.2%, w/w) as active fillers were developed by solution casting method, and their preservation effects on scallop adductor muscle refrigerated at 4°C for 0, 3, 6, 9, and 12 days were evaluated. Inclusion of the two active fillers did not influence the thermal stability of the films but created heterogenous and discontinuous film microstructure and increased the film hydrophobicity. Increase in the concentrations of active fillers lowered the mechanical properties and water vapor permeability of the films but increased their crystallinity, thickness, water contact angle, opacity, antibacterial property, and antioxidant property. The longest release times for both cinnamaldehyde and α-tocopherol were found in 95% (v/v) ethanol solution. The gelatin/dextran films containing 1.2% (w/w) of active fillers (Gelatin [Ge]/Dextran [Dx]/1.2 film) improved the chemical stability of refrigerated scallop adductor muscle. The total viable count (TVC) of the unpackaged scallop adductor muscle exceeded the recommended limit of 7 lg CFU/g on day 6 (7.07 ± 0.50 lg CFU/g), whereas the TVC of the Ge/Dx/1.2 film-packaged scallop adductor muscle was still below the limit on day 9 (5.60 ± 0.50 lg CFU/g). Thus, the Ge/Dx/1.2 film can extend the shelf life of refrigerated scallop adductor muscle by at least 3 days. Overall, the developed gelatin/dextran active packaging films are promising for the preservation of aquatic food products.

Tricarboxylic Acid Cycle Metabolite-Coordinated Biohydrogels Augment Cranial Bone Regeneration Through Neutrophil-Stimulated Mesenchymal Stem Cell Recruitment and Histone Acetylation-Mediated Osteogenesis

Cranial bone defects remain a major clinical challenge, increasing patients' life burdens. Tricarboxylic acid (TCA) cycle metabolites play crucial roles in facilitating bone tissue regeneration. However, the development of TCA cycle metabolite-modified biomimetic grafts for skull bone regeneration still needs to be improved. The mechanism underlying the release of TCA cycle metabolites from biomaterials in regulating immune responses and mesenchymal stem cell (MSC) fate (migration and differentiation) remains unknown. Herein, this work constructs biomimetic hydrogels composed of gelatin and chitosan networks covalently cross-linked by genipin (CGG hydrogels). A series of TCA cycle metabolite-coordinated CGG hydrogels with strong mechanical and antiswelling performances are subsequently developed. Remarkably, the citrate (Na3Cit, Cit)-coordinated CGG hydrogels (CGG-Cit hydrogels) with the highest mechanical modulus and strength significantly promote skull bone regeneration in rat and murine cranial defects. Mechanistically, using a transgenic mouse model, bulk RNA sequencing, and single-cell RNA sequencing, this work demonstrates that CGG-Cit hydrogels promote Gli1+ MSC migration via neutrophil-secreted oncostatin M. Results also indicate that citrate improves osteogenesis via enhanced histone H3K9 acetylation on osteogenic master genes. Taken together, the immune microenvironment- and MSC fate-regulated CGG-Cit hydrogels represent a highly efficient and facile approach toward skull bone tissue regeneration with great potential for bench-to-bedside translation.

Preservative effect of gelatin/chitosan-based films incorporated with lemon essential oil on grass carp (Ctenopharyngodon idellus) fillets during storage

The present study investigated the effect of fish gelatin/chitosan-based (FG/CS-based) films incorporated with lemon essential oil (LEO) on grass carp fillets in terms of moisture status, total volatile basic nitrogen (TVB-N), and microbial community succession during chilled (4 °C) and iced (0 °C) storage. Low-field nuclear magnetic resonance (LF-NMR) revealed that the active films remarkably inhibited moisture transformation from being the immobilized to free water in grass carp fillets, accompanied with the reduced T22 relaxation time. Besides, magnetic resonance imaging (MRI) detected a higher density of proton in the treated fish samples, indicating that the active films could improve the water-holding capacity of fish samples. Moreover, high-throughput 16S rRNA sequencing suggested that the FG/CS-based films loaded with LEO efficiently decreased the relative abundance of the bacterial genera Shewanella and Aeromonas in grass carp fillets, with minimal accumulation of TVB-N during storage. Additionally, the low storage temperature (0 °C) could further enhance the preservative effect of the active films on the fish samples, which together prolonged their shelf-life to 18 days. Overall, the combination of the active films and iced storage could provide a promising strategy to preserve grass carp fillets.

Packaging films based on biopolymers from seafood processing wastes: Preparation, properties, and their applications for shelf-life extension of seafoods-A comprehensive review

Biopolymers derived from seafood processing byproducts are used to prepare active and biodegradable films as the packaging of food products. These films possess bioactivities to enhance the shelf life of packed foods by proactively releasing antimicrobial/antioxidative agents into the foods and providing sufficient barrier properties. Seafood processing byproducts are an eminent source of valuable compounds, including biopolymers and bioactive compounds. These biopolymers, including collagen, gelatin, chitosan, and muscle proteins, could be used to prepare robust and sustainable food packaging with some antimicrobial agents or antioxidants, for example, plant extracts rich in polyphenols or essential oils. These active packaging are not only biodegradable but also prevent the deterioration of packed foods caused by spoilage microorganisms as well as chemical deterioration. Seafood discards have a promising benefit for the development of environmentally friendly food packaging systems via the appropriate preparation methods or techniques. Therefore, the green packaging from seafood leftover can be better exploited and replace the synthetic counterpart.

Development of Plastic/Gelatin Bilayer Active Packaging Film with Antibacterial and Water-Absorbing Functions for Lamb Preservation

In order to extend the shelf life of refrigerating raw lamb by inhibiting the growth of microorganisms, preventing the oxidation of fat and protein, and absorbing the juice outflow of lamb during storage, an active packaging system based on plastic/gelatin bilayer film with essential oil was developed in this study. Three kinds of petroleum-derived plastic films, oriented polypropylene (OPP), polyethylene terephthalate, and polyethylene, were coated with gelatin to make bilayer films for lamb preservation. The results showed significant improvement in the mechanical properties, oxygen, moisture, and light barriers of the bilayer films compared to the gelatin film. The OPP/gelatin bilayer film was selected for further experiments because of its highest acceptance by panelists. If the amount of juice outflow was less than 350% of the mass of the gelatin layer, it was difficult for the gelatin film to separate from lamb. With the increase in essential oil concentration, the water absorption capacity decreased. The OPP/gelatin bilayer films with 20% mustard or 10% oregano essential oils inhibited the growth of bacteria in lamb and displayed better mechanical properties. Essential oil decreased the brightness and light transmittance of the bilayer films and made the film yellow. In conclusion, our results suggested that the active packaging system based on OPP/gelatin bilayer film was more suitable for raw lamb preservation than single-layer gelatin film or petroleum-derived plastic film, but need further study, including minimizing the amount of essential oil, enhancing the mechanical strength of the gelatin film after water absorption.

Bacterial diseases in marine fish species: current trends and future prospects in disease management

The fisheries sub-sector of aquaculture-i.e., the pisciculture industry, contributes significantly to a country's economy, employing a sizable proportion of the population. It also makes important contributions to household food security because the current demand for animal protein cannot be fulfilled by harvesting wild fish from riverines, lakes, dams, and oceans. For good pond management techniques and sustaining fish health, the fisherfolk, and the industry require well-established regulatory structures, efficient disease management strategies, and other extended services. In rearing marine fish, infections resulting from disease outbreaks are a weighty concern because they can cause considerable economic loss due to morbidity and mortality. Consequently, to find effective solutions for the prevention and control of the major diseases limiting fish production in aquaculture, multidisciplinary studies on the traits of potential fish pathogens, the biology of the fish as hosts, and an adequate understanding of the global environmental factors are fundamental. This review highlights the various bacterial diseases and their causative pathogens prevalent in the pisciculture industry and the current solutions while emphasising marine fish species. Given that preexisting methods are known to have several disadvantages, other sustainable alternatives like antimicrobial peptides, synthetic peptides, probiotics, and medicinal treatments have emerged to be an enormous potential solution to these challenges.

Insight on Incorporation of Essential Oils as Antimicrobial Substances in Biopolymer-Based Active Packaging

The increasing interest in microbiological food safety requires the development of sensitive and reliable analyses and technologies for preserving food products' freshness and quality. Different types of packaging systems are one of the solutions for controlling microbiological activity in foods. During the last decades, the development of biopolymer-based active packaging with essential oil incorporation systems has resulted in technologies with exceptional application potential, primarily in the food industry. There is no doubt that this principle can facilitate food status monitoring, reduce food waste, extend the shelf life, improve the overall quality of food, or indicate a larger problem during the storage, production, and distribution of foodstuffs. On the other hand, most antimicrobial packaging systems are in the development phase, while the sensitivity, selectivity, complexity, and, above all, safety of these materials are just some of the essential questions that need to be answered before they can be widely used. The incorporation of essential oils as antimicrobial substances in biopolymer-based active packaging holds significant promise for enhancing food safety, extending shelf life, and offering more sustainable packaging solutions. While challenges exist, ongoing research and innovation in this field are likely to lead to the development of effective and environmentally friendly packaging systems with enhanced antimicrobial properties.

Multifunctional chromone-incorporated poly(hydroxybutyrate) luminescent film for active and intelligent food packaging

The major objective of present work was to fabricate poly(hydroxybutyrate) based luminescent films for genuine food packaging applications. These films were synthesized by incorporating varying Chromone (CH) concentrations (5, 10, 15, 20, and 25 wt%) into poly(hydroxybutyrate) (PHB) matrix through solvent-casting. Different characteristics of prepared films were examined using Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Mechanical testing, and Time-resolved photoluminescence (TRPL). UV-blocking properties and water vapor permeation were also examined. FTIR spectra indicated the occurrence of hydrogen bonding between PHB and CH. Among all prepared film samples, PHB/CH15 showed maximum tensile strength (22.5 MPa) with enhanced barrier ability against water vapor and UV rays, thermal stability, and luminescent performance. After overall analysis, PHB/CH15 film was selected to investigate its X-ray diffraction, release behavior, DPPH scavenging, and antimicrobial potential. Release kinetics revealed that the cumulative release percentage of CH was higher in fatty acid stimulant. Moreover, results suggested that this film demonstrated antioxidant activity (>55 %) and superior antimicrobial potential against Aspergillus niger, Staphylococcus aureus, and Escherichia coli. Furthermore, packaging of bread samples using PHB/CH15 film demonstrated the complete inhibition of microbial growth in bread up to 10 days of storage and ensure the safety of genuine food products.

Gelatin Improves the Performance of Oregano Essential Oil Nanoparticle Composite Films-Application to the Preservation of Mullet

In this study, the addition of oregano oil chitosan nanoparticles (OEO-CSNPs) was conducted to enhance the comprehensive properties of gelatin films (GA), and the optimal addition ratio of nanoparticles was determined for its application in the preservation of mullet. Oregano oil chitosan nanoparticles were organically combined with gelatin at different concentrations (0%, 2%, 4%, 6% and 8%) to obtain oregano oil-chitosan nanoparticle-GA-based composite films (G/OEO-CSNPs), and thereafter G/OEO-CSNPs were characterized and investigated for their preservative effects on mullet. Subsequent analysis revealed that OEO-CSNPs were uniformly dispersed in the GA matrix, and that G/OEO-CSNPs had significantly improved mechanical ability, UV-visible light blocking performance and thermal stability. Furthermore, the nanoparticles exhibited excellent antioxidant and antibacterial properties, and they improved the films' suitability as edible packaging. The attributes of the G/OEO-CSNPs were optimized, the films had the strongest radical scavenging and lowest water solubility, and electron microscopy also showed nanoparticle penetration into the polymer when the concentration of OEO-CSNPs was 6% (thickness = 0.092 ± 0.001, TS = 47.62 ± 0.37, E = 4.06 ± 0.17, water solubility = 48.00 ± 1.11). Furthermore, the GA-based composite film containing 6% OEO-CSNPs was able to inhibit microbial growth, slow fat decomposition and protein oxidation, reduce endogenous enzyme activity, and delay the spoilage of mullet during the refrigeration process, all of which indicate its excellent potential for meat preservation application.

Chitosan with Natural Additives as a Potential Food Packaging

Recently, the development of materials based on natural polymers have been observed. This is the result of increasing environmental degradation, as well as increased awareness and consumer expectations. Many industries, especially the packaging industry, face challenges resulting from legal regulations. Chitin is the most common biopolymer right after cellulose and is used to produce chitosan. Due to the properties of chitosan, such as non-toxicity, biocompatibility, as well as antimicrobial properties, chitosan-based materials are used in many industries. Many studies have been conducted to determine the suitability of chitosan materials as food packaging, and their advantages and limitations have been identified. Thanks to the possibility of modifying the chitosan matrix by using natural additives, it is possible to strengthen the antioxidant and antimicrobial activity of chitosan films, which means that, in the near future, chitosan-based materials will be a more environmentally friendly alternative to the plastic packaging used so far. The article presents literature data on the most commonly used natural additives, such as essential oils, plant extracts, or polysaccharides, and their effects on antimicrobial, antioxidant, mechanical, barrier, and optical properties. The application of chitosan as a natural biopolymer in food packaging extends the shelf-life of various food products while simultaneously reducing the use of synthetic plastics, which in turn will have a positive impact on the natural environment. However, further research on chitosan and its combinations with various materials is still needed to extent the application of chitosan in food packaging and bring its application to industrial levels.

Formulation and stabilization of high internal phase emulsions: Stabilization by cellulose nanocrystals and gelatinized soluble starch

In this work, high internal phase emulsions (HIPEs) stabilized by naturally derived cellulose nanocrystals (CNC) and gelatinized soluble starch (GSS) were fabricated to stabilize oregano essential oil (OEO) in the absence of surfactant. The physical properties, microstructures, rheological properties, and storage stability of HIPEs were investigated by adjusting CNC contents (0.2, 0.3, 0.4 and 0.5 wt%) and starch concentration (4.5 wt%). The results revealed that CNC-GSS stabilized HIPEs exhibited good storage stability within one month and the smallest droplets size at a CNC concentration of 0.4 wt%. The emulsion volume fractions of 0.2, 0.3, 0.4 and 0.5 wt% CNC-GSS stabilized HIPEs after centrifugation reached 77.58, 82.05, 94.22, and 91.41 %, respectively. The effect of native CNC and GSS were analyzed to understand the stability mechanisms of HIPEs. The results revealed that CNC could be used as an effective stabilizer and emulsifier to fabricate the stable and gel-like HIPEs with tunable microstructure and rheological properties.

Effect of octenylsuccination of alginate on structure, mechanical and barrier properties of alginate-zein composite film

This study examines the effect of the chemical modification of alginate (ALG) by octenyl succinic anhydride (OSA) on the physical, mechanical, and barrier properties of the alginate-zein blend film. To reach this goal, the effect of the degree of substitution (DS) of the modified-ALG (OS-ALG) was assessed on the physical, mechanical, and barrier properties of the fabricated composite films. As confirmed by FTIR and XRD, the hydrophobic nature of OS-ALG facilitated the miscibility of OS-ALG-zein than ALG-zein. Moreover, scanning electron microscope (SEM) images confirmed the FTIR and XRD results. Furthermore, the substitution of ALG with OS-ALG in the blend films can significantly improve the water resistance and mechanical strength of the samples. The OSA-modification of ALG increased the water contact angle while decreasing the solubility, moisture content, extensibility, and water vapor permeability. Finally, the OS-ALG (DS = 0.034) and zein would be considered as a new source for the fabrication of biodegradable composite films with excellent structural and barrier properties.

Investigation of physicochemical properties, antimicrobial and antioxidant activity of edible films based on chitosan/casein containing Origanum vulgare L. essential oil and its effect on quality maintenance of cherry tomato

Edible coatings prevent physicochemical and biological food deterioration. Using bioactive compounds like essential oils can enrich films. In this study, edible films from chitosan (C), casein (Z) and oregano (OEO) were developed, and their physicochemical, barrier, antimicrobial, antioxidant, and structural properties (FTIR, SEM) were investigated. The C₁Z₃ ratio had good mechanical and inhibitory properties, and OEO improves flexibility, barrier, hydrophobic, antimicrobial, and antioxidant properties. The physicochemical and microbiological properties of cherry tomatoes were affected by C₁Z₃ and C₁Z₃O_1.5 coatings. Coated fruits were stored at 4 °C for 32 days. The best results for weight loss, shrinkage, and titratable acidity were found to be 17.88%, 31.12%, and 0.15% in C₁Z₃O_1.5 coated cherry tomatoes, respectively.The TMAB of C₁Z₃O_1.5 coated fruits was less than detectable and the fungal growth was inhibited for 28 days. Accordingly, by adding OEO to chitosan/casein coatings, the spoilage process of cherry tomatoes was delayed for long-term storage.

Mung bean protein films incorporated with cumin essential oil: development and characterization

Biodegradable films based on mung bean protein (1, 3 and 5%) incorporated with cumin essential oil (EO) (0, 0.25 and 0.5 ml/g protein) were developed. Adding cumin oil and increasing the protein content enhanced the thickness, tensile strength and yellowness. Films incorporated with EO exhibited less water vapor permeability and water solubility, as compared to the control films. A higher antioxidant activity was also obtained by increasing the EO and protein ratios. Films with higher levels of protein displayed lower thermal stability with a lower degradation temperature, as suggested by thermo-gravimetric analyses. In addition, the incorporation of EO reduced thermal stability, as confirmed by the higher weight loss and lower degradation temperature. Furthermore, mung bean protein films containing 0.5 ml cumin oil/g protein had suitable physical characteristics, antioxidant activities, water barrier properties and thermal stability; thus, they can be used as appropriate biodegradable packaging materials for food preservation.

Ginger Essential Oil as an Active Addition to Composite Chitosan Films: Development and Characterization

The recent interest in food biopackaging is showing an increasing trend, especially in the development of antimicrobial coatings and films. The focus of this study is to assess the potential application of ginger (Zingiber officinale) essential oil (GEO) to polysaccharide films based on chitosan (CHf) and their utilization as an active edible packaging. The films were characterized by different instrumental techniques, and data indicated significant differences (p < 0.05) in the chemical composition of the samples. Forty-seven active compounds from ginger rhizomes were identified in the examined essential oil by gas chromatography mass spectrometer (GC-MS). Fourier transforms infrared spectra (FT-IR) confirmed an interaction between the hydroxyl groups of the phenolic compounds of the essential oil and the amine groups of the bioactive matrix, as shown by the peaks at wavenumbers 1639 cm−1 and 1558 cm−1. X-ray diffraction data suggested a lower crystallinity in the CHf due to the addition of GEO. Differential scanning calorimetric (DSC) analysis revealed that the CHf possessed high thermal stability, especially when different concentrations of GEO were added. The bioactive CHf showed distinct activity against both Gram-positive and Gram-negative bacteria, such as Staphylococcus aureus, Bacillus subtilis, Streptococcus sp., Escherichia coli, Salmonella sp., and Pseudomonas aeruginosa, thus improving the antimicrobial activity to these films. The results provide a comprehensive insight into the importance of films with incorporated EOs as novel types of active food packaging. Antimicrobial food packaging is one of the most promising kinds of active packaging, and acts to reduce, inhibit, or retard any microorganism growth that could contaminate packaged food items.

Current Trends in the Utilization of Essential Oils for Polysaccharide- and Protein-Derived Food Packaging Materials

Essential oils (EOs) have received attention in the food industry for developing biopolymer-derived food packaging materials. EOs are an excellent choice to replace petroleum-derived additives in food packaging materials due to their abundance in nature, eco-friendliness, and superior antimicrobial and antioxidant attributes. Thus far, EOs have been used in cellulose-, starch-, chitosan-, and protein-based food packaging materials. Biopolymer-based materials have lower antioxidant and antibacterial properties in comparison with their counterparts, and are not suitable for food packaging applications. Various synthetic-based compounds are being used to improve the antimicrobial and antioxidant properties of biopolymers. However, natural essential oils are sustainable and non-harmful alternatives to synthetic antimicrobial and antioxidant agents for use in biopolymer-derived food packaging materials. The incorporation of EOs into the polymeric matrix affects their physicochemical properties, particularly improving their antimicrobial and antioxidant properties. EOs in the food packaging materials increase the shelf life of the packaged food, inhibit the growth of microorganisms, and provide protection against oxidation. Essential oils also influence other properties, such as tensile, barrier, and optical properties of the biopolymers. This review article gives a detailed overview of the use of EOs in biopolymer-derived food packaging materials. The innovative ways of incorporating of EOs into food packaging materials are also highlighted, and future perspectives are discussed.

Formation chitosan-based hydrogel film containing silicon for hops β-acids release as potential food packaging material

Hydrogel film composed of chitosan (CS) as raw material was prepared by free radical polymerization. Silicon was introduced into the hydrogel film in different ways (covalent/non-covalent) to improve the physical properties of the film, and β-acids were loaded to enhance the antibacterial activity of the film. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis were used to characterize the structure of films. The mechanical results indicated that when nano-silica (0.3%) was introduced into film (containing 0.2% β-acids) by non-covalently bond, the tensile strength increased to 8.59 MPa. Meanwhile silicon (0.3%) entered the film by covalent bonding, the tensile strength increased to 7.99 MPa. The films loaded with β-acids had well ability to blocks ultraviolet rays and exhibited inhibitory effect on E. coli and S. aureus. In the PBS (37 °C, pH = 7.4) simulant solution, the release mechanism of most films to release the β-acids followed non-Fick diffusion (n > 0.5). It could be concluded that the prepared hydrogel films loading with β-acids had broad application prospects in food packaging material with antibacterial property and controlled release.

Release of Cinnamaldehyde and Thymol from PLA/Tilapia Fish Gelatin-Sodium Alginate Bilayer Films to Liquid and Solid Food Simulants, and Japanese Sea Bass: A Comparative Study

This study aimed to develop an active biodegradable bilayer film and to investigate the release behaviors of active compounds into different food matrices. Cinnamaldehyde (CI) or thymol (Ty) was encapsulated in β-cyclodextrin (β-CD) to prepare the active β-CD inclusion complex (β-CD-CI/β-CD-Ty). The tilapia fish gelatin-sodium alginate composite (FGSA) containing β-CD-CI or β-CD-Ty was coated on the surface of PLA film to obtain the active bilayer film. Different food simulants including liquid food simulants (water, 3% acetic acid, 10% ethanol, and 95% ethanol), solid dry food simulant (modified polyphenylene oxide (Tenax TA)), and the real food (Japanese sea bass) were selected to investigate the release behaviors of bilayer films into different food matrixes. The results showed that the prepared β-CD inclusion complexes distributed evenly in the cross-linking structure of FGSA and improved the thickness and water contact angle of the bilayer films. Active compounds possessed the lowest release rates in Tenax TA, compared to the release to liquid simulants and sea bass. CI and Ty sustained the release to the sea bass matrix with a similar behavior to the release to 95% ethanol. The bilayer film containing β-CD-Ty exhibited stronger active antibacterial and antioxidant activities, probably due to the higher release efficiency of Ty in test mediums.

TOCNC-g-PEI nanoparticle encapsulated oregano essential oil for enhancing the antimicrobial activity of cellulose nanofibril packaging films

A nanocellulose-based film with excellent antimicrobial and antioxidant activity was developed by adding Pickering emulsion which was stabilized by functionalized particles. First, TOCNC-g-PEI nanoparticles were prepared by grafting polyethyleneimine (PEI) onto TEMPO-oxidized cellulose nanocrystals (TOCNCs) and used to stabilize oregano essential oil (OEO) Pickering emulsions. The contact angle of TOCNC-g-PEI nanoparticles was 79.7°, and the minimum inhibitory concentration against L.monocytogenes and E.coli was 0.50 mg/mL. Second, the emulsion droplets were stably dispersed in cellulose nanofibril (CNF) suspensions owing to the depletion stability of CNFs. Finally, the films were dried and emulsion droplets formed oil core/CNF shell microcapsules in active CNF films and completely encapsulated OEO in active CNF films. The inhibition rates of the film against L.monocytogenes and E.coli were 97.28% and 97.23%, respectively. The influence of Pickering emulsion on the active CNF films was discussed. The developed active CNF films have promising application in food preservation and active packaging.

ZnO nanoparticles stabilized oregano essential oil Pickering emulsion for functional cellulose nanofibrils packaging films with antimicrobial and antioxidant activity

The growth and reproduction of microorganisms can cause food spoilage in the process of food transportation and storage. Active packaging is a good way to inhibit food spoilage and prolong the shelf lives of foods. In this study, O/W Pickering emulsion with ZnO nanoparticles as solid particles and oregano essential oil as the oil phase was prepared and used to functionalize cellulose nanofibrils (CNFs) film, and excellent antimicrobial and antioxidant activity was obtained. When the concentration of ZnO nanoparticles was 1.5 wt% and the mass fraction of the oil phase was 20%, the Pickering emulsion with a particle size of 26.85 μm exhibited strong standing stability. The Pickering emulsion was blended with the film-forming matrix CNFs to prepare active packaging films by casting. The Pickering emulsion evenly dispersed in the film to form microcapsules which encapsulated oregano essential oil entirely. The antimicrobial activity against Listeria monocytogenes was 89.61%, the DPPH radical scavenging rate was 58.52%, while the barrier properties of the developed films against oxygen, water vapor and visible light were improved. The active CNFs film prepared by Pickering emulsion could inhibit the growth of microorganism and prolong the shelf lives of foods.

The impact of essential oils on the qualitative properties, release profile, and stimuli-responsiveness of active food packaging nanocomposites

Food industries attempt to introduce a new food packaging by blending essential oils (EOs) into the polymeric matrix as an active packaging, which has great ability to preserve the quality of food and increase its shelf life by releasing active compounds within storage. The main point in designing the active packaging is controlled-release of active substances for their enhanced activity. Biopolymers are functional substances, which suggest structural integrity to sense external stimuli like temperature, pH, or ionic strength. The controlled release of EOs from active packaging and their stimuli-responsive properties can be very important for practical applications of these novel biocomposites. EOs can affect the uniformity of the polymeric matrix and physical and structural characteristics of the composites, such as moisture content, solubility in water, water vapor transmission rate, elongation at break, and tensile strength. To measure the ingredients of EOs and their migration from food packaging, chromatographic methods can be used. A head-space-solid phase micro-extraction coupled to gas chromatography (HS-SPME-GC-MS) technique is as a good process for evaluating the release of Eos. Therefore, the aims of this review were to evaluate the qualitative characteristics, release profile, and stimuli-responsiveness of active and smart food packaging nanocomposites loaded with essential oils and developing such multi-faceted packaging for advanced applications.

Effect of chitosan coating incorporated with oregano or cinnamon essential oil on the bacterial diversity and shelf life of roast duck in modified atmosphere packaging

The present study aimed to investigate the effect of chitosan edible coating containing 0.15% oregano essential oil (OEO) or 0.60% cinnamon essential oil (CEO) on the quality characteristics and dynamic changes in the bacterial community of roast duck slices under modified atmosphere packaging (MAP, 30% CO₂/70% N₂) during 21 days of storage at 2 ± 2 °C. The results showed that the application of chitosan coating (CH) alone inhibited the growth of microorganisms and prevented lipid oxidation throughout storage. Moreover, the storage stability was further improved by including OEO or CEO, which lowered (P < 0.05) values for total viable count (TVC), Enterobacteriaceae, 2-thiobarbituric acid reactive substance (TBARS) and total volatile basic nitrogen (TVB-N). Based on the microbiological results, the shelf-life of CH-OEO and CH-CEO treated roast duck slices was prolonged by at least 7 days compared to that of the control. In addition, packaging types applied in this study played a major role in the bacterial community development. Notably, Vibrio spp. were the most predominant bacteria in all samples, when TVC values approached the shelf-life threshold, suggesting that this bacterium may be the main contributor to the spoilage of roast duck. The growth inhibition of Vibrio spp. in the CH-OEO and CH-CEO treatments during the early period of chilled storage might be the reason for the extension of the shelf life. Taken together, CH incorporated with OEO or CEO could be developed as prospective edible packaging materials to preserve roast duck meat.

Effect of Deterpenated Origanum majorana L. Essential Oil on the Physicochemical and Biological Properties of Chitosan/β-Chitin Nanofibers Nanocomposite Films

Herein, the effect of three deterpenated fractions from Origanum majorana L. essential oil on the physicochemical, mechanical and biological properties of chitosan/β-chitin nanofibers-based nanocomposite films were investigated. In general, the incorporation of Origanum majorana L. original essential oil or its deterpenated fractions increases the opacity of the nanocomposite films and gives them a yellowish color. The water solubility decreases from 58% for chitosan/β-chitin nanofibers nanocomposite film to around 32% for the nanocomposite films modified with original essential oil or its deterpenated fractions. Regarding the thermal stability, no major changes were observed, and the mechanical properties decreased. Interestingly, data show differences on the biological properties of the materials depending on the incorporated deterpenated fraction of Origanum majorana L. essential oil. The nanocomposite films prepared with the deterpenated fractions with a high concentration of oxygenated terpene derivatives show the best antifungal activity against Aspergillus niger, with fungal growth inhibition of around 85.90%. Nonetheless, the only nanocomposite film that does not present cytotoxicity on the viability of L929 fibroblast cells after 48 and 72 h is the one prepared with the fraction presenting the higher terpenic hydrocarbon content (87.92%). These results suggest that the composition of the deterpenated fraction plays an important role in determining the biological properties of the nanocomposite films.

Oregano essential oil addition in rice starch films and its effects on the chilled fish storage

Active packaging produced from biodegradable polymers and essential oil could have a great value to food industries. This study aimed to evaluate the effect of the addition of oregano essential oil (OEO) on rice starch films and its application as packaging for fish fillets. Several concentrations of OEO were added to the films, the film added with 4.5% OEO showed lower permeability to water vapor 3.7 g mm kPa^-1 m^-2 day^-1, intermediate solubility of 24% and high tensile strength (4.4 MPa) while the standard film (without the addition of OEO) presented 8.8 g mm kPa^-1 m^-2 day^-1, 25.8% and 2.2 MPa, respectively. Packed fish fillets with the active film showed an increase in its shelf life when compared to the standard film. Packaged fish fillets in OEO films showed greater resistance (13.4 N), less oxidation (1.65 mg malonaldehyde/kg of sample) and less microbiological growth 10⁷ CFU/g in 6 days of storage, while packaged fish fillets in standard film showed lower resistance (10.4 N), higher oxidation (1.88 mg malonaldehyde/kg of sample) and higher microbiological growth 10⁸ CFU/g. Thus, the active packaging developed had the capacity to increase the shelf life of a perishable product that has great interest of food industries.

Antibacterial Activity of Chitosan-Polylactate Fabricated Plastic Film and Its Application on the Preservation of Fish Fillet

This research prepared chitosan–PLA plastic films by extrusion, analyzed the physical and mechanical properties and antibacterial activity of the fabricated plastic films, and used them to preserve grouper fillet. We added chitosan (220 kDa, 93% DD) in the weight ratio of 0.5–2% into the PLA to prepare the chitosan–PLA films. With the increasing chitosan dosage, both the water vapor transmission rate and moisture content of chitosan–PLA films increased. Among the three doses of chitosan (0.5%, 1%, and 2%) added to PLA, 0.5% chitosan–PLA film had the highest antibacterial activity. This plastic film had an inhibitory efficiency of over 95% against Escherichia coli, Pseudomonas fluorescens, and Staphylococcus aureus. The action of covering the fish fillet with 0.5% chitosan–PLA film significantly reduced several microbes’ counting (i.e., mesophiles, psychrophiles, coliforms, Pseudomonas, Aeromonas, and Vibrio) and total volatile basic nitrogen (TVBN) value in the grouper fillets stored at 4 °C. Thus, such action prolongs the fish fillets’ shelf life to up to at least nine days, and this 0.5% chitosan–PLA film shows promising potential for preserving refrigerated fish.

Esculin and ferric citrate-incorporated sturgeon skin gelatine as an antioxidant film for food packaging to prevent Enterococcus faecalis contamination

Herein, a sturgeon skin gelatine film combined with esculin and ferric citrate was developed as an edible food packaging material to prevent Enterococcus faecalis (E. faecalis) contamination. E. faecalis is able to hydrolyse esculin in the film, and then the hydrolysed product, esculetin, combines with ferric citrate to form a brown-black phenol iron complex. This phenomenon can be observed easily after 48 h of contamination under visible light, and it can be determined under 365 nm ultraviolet light with high sensitivity. With the addition of esculin and ferric citrate, the film showed better mechanical properties and water vapour permeability than those of the unmodified gelatine. When an increased amount of esculin was added, an increase in thermal stability, antioxidant activity, and antioxidant stability of the film was observed. These physicochemical characteristics are beneficial for developing a packaging material for food storage that mitigates foodborne illness caused by E. faecalis.

The effect of chitosan coatings enriched with the extracts and essential oils of Elettaria Cardamomum on the shelf-life of chicken drumsticks vacuum-packaged at 4 °C

This study was conducted to investigate the microbial, chemical, and sensory quality of chicken drumsticks vacuum-packaged at 4 °C, using chitosan (CH) coating containing ethanol extracts and the essential oils (EO) of Elettaria Cardamomum. The treatments were stored for 16 days in cold conditions and investigated in three-day intervals. Total volatile base nitrogen analysis showed that, on the 6th day, the uncoated treatment showed unacceptable values, while treatments containing the EO and extracts stayed below the specified level even on the 16th day. In addition, during storage, the Peroxide values for the uncoated sample were higher than the documented for the coated groups. Results of the Thiobarbituric acid reactive substances index revealed that the sample containing the EO of E. Cardamomum is the best treatment. Regarding to pH on the 16th day, the microbial growth in the mixed sample was 0.46 units lower than the control group. Microbial analysis showed that coating significantly reduce the growth of all five groups of bacteria at 4 ± 1 °C; thus, on the 6th day, the differences between mesophiles, Enterobacteriaceae, psychrotrophic, and H₂S-producing bacteria with the control group were 4.5, 4.5, 2.5, and 2 logs Cfu/g, respectively (p < 0.05). Furthermore, the lactic acid bacteria growth was completely stopped. Finally, it was found that adding EO and extracts could significantly preserve the sensory quality of the samples. Thus, it was concluded that vacuum-packaged CH coatings enriched with the extract and EO of E. Cardamomum can preserve the quality of chicken drumsticks during storage in refrigerators.

Developed Chitosan/Oregano Essential Oil Biocomposite Packaging Film Enhanced by Cellulose Nanofibril

The use of advanced and eco-friendly materials has become a trend in the field of food packaging. Cellulose nanofibrils (CNFs) were prepared from bleached bagasse pulp board by a mechanical grinding method and were used to enhance the properties of a chitosan/oregano essential oil (OEO) biocomposite packaging film. The growth inhibition rate of the developed films with 2% (w/w) OEO against E. coli and L. monocytogenes reached 99%. With the increased levels of added CNFs, the fibrous network structure of the films became more obvious, as was determined by SEM and the formation of strong hydrogen bonds between CNFs and chitosan was observed in FTIR spectra, while the XRD pattern suggested that the strength of diffraction peaks and crystallinity of the films slightly increased. The addition of 20% CNFs contributed to an oxygen-transmission rate reduction of 5.96 cc/m2·day and water vapor transmission rate reduction of 741.49 g/m2·day. However, the increase in CNFs contents did not significantly improve the barrier properties of the film. The addition of 60% CNFs significantly improved the barrier properties of the film to light and exhibited the lowest light transmittance (28.53%) at 600 nm. Addition of CNFs to the chitosan/OEO film significantly improved tensile strength and the addition of 60% CNFs contributed to an increase of 16.80 MPa in tensile strength. The developed chitosan/oregano essential oil/CNFs biocomposite film with favorable properties and antibacterial activity can be used as a green, functional material in the food-packaging field. It has the potential to improve food quality and extend food shelf life.