Non-biodegradable polymeric waste pyrolysis for energy recovery

Photocatalytic Upcycling and Depolymerization of Vinyl Polymers

Photocatalytic upcycling and depolymerization of vinyl polymers have emerged as promising strategies to combat plastic pollution and promote a circular economy. This mini review critically summarizes current developments in the upcycling and degradation of vinyl polymers including polystyrene and poly(meth)acrylates. Of these material classes, polymethacrylates possess the unique possibility to undergo a photocatalytic depolymerization back to monomer under thermodynamically favourable conditions, thus presenting significant advantages over traditional thermal strategies. Our perspective on current formidable challenges and potential future directions are also discussed.

Recent advances in liquid fuel production from plastic waste via pyrolysis: Emphasis on polyolefins and polystyrene

The management of plastic waste (PW) has become an indispensable worldwide issue because of the enhanced accumulation and environmental impacts of these waste materials. Thermo-catalytic pyrolysis has been proposed as an emerging technology for the valorization of PW into value-added liquid fuels. This review provides a comprehensive investigation of the latest advances in thermo-catalytic pyrolysis of PW for liquid fuel generation, by emphasizing polyethylene, polypropylene, and polystyrene. To this end, the current strategies of PW management are summarized. The various parameters affecting the thermal pyrolysis of PW (e.g., temperature, residence time, heating rate, pyrolysis medium, and plastic type) are discussed, highlighting their significant influence on feed reactivity, product yield, and carbon number distribution of the pyrolysis process. Optimizing these parameters in the pyrolysis process can ensure highly efficient energy recovery from PW. In comparison with non-catalytic PW pyrolysis, catalytic pyrolysis of PW is considered by discussing mechanisms, reaction pathways, and the performance of various catalysts. It is established that the introduction of either acid or base catalysts shifts PW pyrolysis from the conventional free radical mechanism towards the carbonium ion mechanism, altering its kinetics and pathways. This review also provides an overview of PW pyrolysis practicality for scaling up by describing techno-economic challenges and opportunities, environmental considerations, and presenting future outlooks in this field. Overall, via investigation of the recent research findings, this paper offers valuable insights into the potential of thermo-catalytic pyrolysis as an emerging strategy for PW management and the production of liquid fuels, while also highlighting avenues for further exploration and development.

Two-stage thermal pyrolysis of plastic solid waste: Set-up and operative conditions investigation for gaseous fuel production

In response to the escalating global challenge of mounting plastic waste and the imperative to adopt more sustainable practices for resource utilization, our study focuses on the utilization of plastic solid waste (PSW) through a two-stage thermal pyrolysis process. This aims to demonstrate its potential as a high-performance alternative to existing two-stage catalytic pyrolysis methods. The experimentation involved processing real scrap PSW material in a lab-scale batch set-up, emphasizing optimizing residence time in the cracking reactor to maximize gas yield and its lower heating value (LHV). The study underscores the advantages of the employed two-stage thermal pyrolysis apparatus through a comparative analysis with established set-up dedicated to maximizing gas yield. Once the operative conditions were explored, resulting pyrolysis products underwent detailed characterization to assess their suitability as a sustainable fuel source. The study also presents a practical application of the produced gaseous fuel, envisioning its combustion in an internal combustion engine (ICE), known for its flexibility regarding fuel properties. This application is demonstrated through a simulation conducted in Unisim Design©. The successful processing of real PSW material in the two-stage lab-scale experimental set-up showcased optimal gas yield achievements (>65 % w/w) with an LHV (∼41 MJ/kg), comparable to that of natural gas. This emphasizes the potential of these sustainable alternatives to replace fossil fuels, especially in the context of ICE applications. The integration of the pyrolysis plant with an ICE demonstrated promising prospects for generating electricity in the transportation sector and facilitating thermal power for heat integration in pyrolysis reactors.

Sustainable management of drinking plastic straws is required to reduce plastic pollution: Are we using them more during COVID-19?

Nowadays, single-use plastic pollution attracts the attention of scholars, policymakers, and practitioners. In addition to personal protective equipment (PPEs) waste during the COVID-19 pandemic, other unpreceded plastic wastes such as packaging from online shopping and food delivery, viruses confirmatory testing, and drinking straws also contributed to pollution and worsened around the globe. This perspective aimed to provide insights into drinking plastic straws as an important source of plastic pollution. Literature searches confirmed that drinking plastic straws, unlike PPEs, have not been researched whether it is an important contributor to pollution or not during the COVID-19 pandemic. Thus, research on the pollution level of this plastic waste and its association with COVID-19 is required. Drinking straw producers and users require adequate strategies and management of this plastic pollution and more widespread rules and regulations to prevent environmental implications and health risks. This study can usefully give highlights for environmentalists, solid waste management experts, policymakers, and governments by describing the environmental impact and raising health risks of drinking plastic straw pollution.

Catalyst-mediated pyrolysis of waste plastics: tuning yield, composition, and nature of pyrolysis oil

With ever-increasing plastic waste, a robust and sustainable methodology to valorize the waste and tweak, the composition of the value added product is the need of the hour. The present study describes the effect of different heterogeneous catalyst systems on the yield, composition and nature of the pyrolysis oil produced from various waste polyolefins like high-density polyethylene (HDPE), linear low-density polyethylene (LLDPE), and polypropylene (PP). The waste polyolefins were subjected to thermal as well as catalytic pyrolysis. Liquid, gas, and solid products were obtained during the pyrolysis. Various catalysts such as activated alumina (AAL), ZSM-5, FCC catalyst, and halloysite clay (HNT) were used. Usage of catalysts has reduced the temperature of the pyrolysis reaction from 470 to 450 °C with better liquid product yield. PP waste generated higher liquid yield compared to LLDPE and HDPE waste. The highest liquid yield of 70.0% was achieved with PP waste using AAL catalyst at 450 °C. The sulfur and chloride content was found to be < 10 and < 20 ppm respectively in all the pyrolysis liquid. Pyrolysis liquid products were analyzed using gas chromatography (GC), nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, X-ray fluorescence (XRF) spectroscopy, and gas chromatography coupled with mass spectrophotometry (GC-MS). The obtained liquid products consist of paraffin, naphthene, olefin and aromatic components. Catalyst regeneration experiments with AAL showed that the product distribution profile remains the same up to three cycles of regeneration.

Chemical characteristics of bottom ash from biomedical waste incinerators in Ghana

Biomedical waste (BMW) incineration is the most used alternative disposal method in developing countries, such as Ghana. The improper disposal of incinerator-generated bottom ash (BA) is a significant concern due to the hazardous nature of waste. A study was conducted at Tema Hospital (TGH) and Asuogyaman Hospital (VRAH) incinerator sites. The BA samples were sent to the Council for Scientific and Industrial Research, Institute of Industrial Research, Ghana. The BA samples were weighed with fisher analytical balance, ground, and sieved with standard grade meshes of 120, 100, and 80 to determine the BA particle size distribution. The chemical composition and heavy metals were analysed using X-ray fluorescence spectrometry (XRF) and atomic absorption spectroscopy (AAS) techniques. The results indicated the chemical composition of the analysed BA samples was CaCO₃ (49.90%), CaO (27.96%) and MgCO₃ (6.02%) for TGH and CaCO₃ (48.30%), CaO (27.07%), and SiO₂ (6.10%) for VRAH, respectively. The mean concentration (M) (kg m^-3) and standard deviation (SD) for TGH in the BA were 7.082 ± 0.478 (Ti), 4.657 ± 0.127 (Zn) and 4.271 ± 1.263 (Fe), while that of VRAH consisted of 10.469 ± 1.588 (Ti), 7.896 ± 2.154 (Fe) and 4.389 ± 0.371 (Zn). Therefore, the heavy metals' mean concentration at the BA is above the WHO permissible limits of soil, i.e., 0.056 kg m^-3 (Ti), 0.085 kg m^-3 (Pb), 0.100 kg m^-3 (Cr) and 0.036 kg m^-3 (Cu). Furthermore, the heavy metal mean concentrations of TGH and VRAH present in the BA analysed samples were ranked in descending order: Ti > Zn > Fe and Ti > Fe > Zn, respectively. It is therefore recommended that BA must be properly disposed of because of the hazardous nature of heavy metals present in the analysed samples, which are able to cause environmental and public health issues.

Fixed Bed Batch Slow Pyrolysis Process for Polystyrene Waste Recycling

This study evaluates the potential of recycling polystyrene (PS) plastic wastes via a fixed bed (batch) slow pyrolysis reactor. The novelty lies in examining the reactor design, conversion parameters, and reaction kinetics to improve the process yield, activation energy, and chemical composition. PS samples were pyrolyzed at 475–575 °C for 30 min under 10–15 psi. Process yield and product attributes were evaluated using different methods to understand PS thermal degradation characteristics better. The results show that PS decomposition started within 2 min from all temperatures, and the total decomposition point of 97% at 475 °C at approximately 5 min. Additionally, analytical results indicate that the average necessary activation energy is 191 kJ/mol. Pyrolysis oil from PS was characterized by gas chromatography–mass spectrometry. The results show that styrene was produced 57–60% from all leading oil compounds (i.e., 2,4-diphenyl-1-butene, 2,4,6-triphenyl-1-hexene, and toluene), and 475 °C has the major average of conversion effectiveness of 91.3%. The results show that the reactor temperature remains the main conversion parameter to achieve the high process yield for oil production from PS. It is concluded that pyrolysis provides a sustainable pathway for PS waste recycling and conversion to value-added products, such as resins and polymers. The proposed method and analytical results are compared with earlier studies to identify directions for future studies.

Conversion of polypropylene-derived crude pyrolytic oils using hydrothermal autoclave reactor and ni/aceh natural zeolite as catalysts

The accumulation of plastic waste has urged researchers to develop methods of waste conversion into valuable products, which is fuel. This study aimed to synthesize Ni embedded onto Aceh natural zeolite (Ni/Aceh-zeolite) as a cheap catalyst which could be used in the reforming process to improve the quality of oil produced from polypropylene (PP) pyrolysis. Ni/Aceh-zeolite was synthesized from Ni(NO₃)₂·6H₂O and acid-activated natural zeolite through impregnation and calcination. The catalyst was found to have particle sizes ranging from 100 to 200 nm of 20 wt% Ni content. The reforming process using Ni/Aceh natural zeolite with Ni loading of 15 wt% yielded the highest amounts of liquid product (yield = 65%) and gasoline fractions (C₅-C₁₂, 96.71%). However, the highest high heating value of 45.467 MJ/kg was found in the liquid product obtained with 20% Ni/Aceh-zeolite. In conclusion, Ni/Aceh-zeolite could be used in the reforming process of PP pyrolysis-derived oil, which could reach a quality similar to that of commercial gasoline.

Catalytic Pyrolysis of Plastic Waste and Molecular Symmetry Effects: A Review

The present review addresses the latest findings and limitations in catalytic pyrolysis for the processing of plastic waste into valuable fuels. Compared to thermal degradation of plastics, catalytic pyrolysis provides better results in regards to the quality of the obtained liquid hydrocarbon fuel. Different types of catalysts can be used in order to improve the thermal degradation of plastics. Some of the most used catalysts are different types of zeolites (HUSY, HZSM-5, Hβ), Fluid Catalytic Cracking (FCC), silica-alumina catalysts, or natural clays. There is a need to find affordable and effective catalysts in the aim of achieving commercialization of catalytic pyrolysis of plastic waste. Therefore, this study summarizes and presents the most significant results found in the literature in regards to catalytic pyrolysis. This paper also investigates the symmetry effects of molecules on the pyrolysis process.

Cork, a Natural Choice to Wine?

This review presents the most recent data on the state-of-the-art of the main compounds present in cork, their interaction with wine, and the impact that natural stoppers may have on wines’ physical-chemical and sensory properties. According to the recent scientific literature, the chemical composition of cork and the scientific relevance of the compounds extract from cork to wine over time are reviewed. Furthermore, the effect of cork compounds transfer into wines during post-bottling is also discussed, as well as their impact on the organoleptic (colour and taste) of wines. This knowledge is essential for the decision-making process undertaken by wine producers to select the stopper most suitable for their wines. In addition, sustainability is also a topic addressed since it is a natural product that generates some waste as well as the way in which this industry is adapting to the closure of the waste cycle.

An Overview on Co-Pyrolysis of Biodegradable and Non-Biodegradable Wastes

Continuous urbanization and modernization have increased the burning of fossil fuels to meet energy needs across the globe, emanating environmental pollution and depleting fossil fuels. Therefore, a shift towards sustainable and renewable energy is necessary. Several techniques to exploit biomass to yield energy are trending, with pyrolysis one of them. Usually, a single feedstock is employed in pyrolysis for anoxygenic generation of biochar together with bio-oil at elevated temperatures (350–600 °C). Bio-oil produced through pyrolysis can be upgraded to crude oil after some modification. However, these modifications of bio-oil are one of the major drawbacks for its large-scale adoption, as upgradation increases the overall cost. Therefore, in recent years the scientific community has been researching co-pyrolysis technology that involves the pyrolysis of lignocellulosic biomass waste with non-biodegradable waste. Co-pyrolysis reduces the need for post-modification of bio-oil, unlike pyrolysis of a single feedstock. This review article discusses the recent advancements and technological challenges in waste biomass co-pyrolysis, the mechanism of co-pyrolysis, and factors that affect co-pyrolysis. The current study critically analyzes different recent research articles presented in databases such as PubMed, MDPI, ScienceDirect, Springer, etc. Hence, this review is one-of-a-kind in that it attempts to explain each and every aspect of the co-pyrolysis process and its current progress in the scientific field. Consequently, this review also compiles the remarkable achievements in co-pyrolysis and recommendations for the future.

Cellulose Nanocrystals (CNC)-Based Functional Materials for Supercapacitor Applications

The growth of industrialization and the population has increased the usage of fossil fuels, resulting in the emission of large amounts of CO_2. This serious environmental issue can be abated by using sustainable and environmentally friendly materials with promising novel and superior performance as an alternative to petroleum-based plastics. Emerging nanomaterials derived from abundant natural resources have received considerable attention as candidates to replace petroleum-based synthetic polymers. As renewable materials from biomass, cellulose nanocrystals (CNCs) nanomaterials exhibit unique physicochemical properties, low cost, biocompatibility and biodegradability. Among a plethora of applications, CNCs have become proven nanomaterials for energy applications encompassing energy storage devices and supercapacitors. This review highlights the recent research contribution on novel CNC-conductive materials and CNCs-based nanocomposites, focusing on their synthesis, surface functionalization and potential applications as supercapacitors (SCs). The synthesis of CNCs encompasses various pretreatment steps including acid hydrolysis, mechanical exfoliation and enzymatic and combination processes from renewable carbon sources. For the widespread applications of CNCs, their derivatives such as carboxylated CNCs, aldehyde-CNCs, hydride-CNCs and sulfonated CNC-based materials are more pertinent. The potential applications of CNCs-conductive hybrid composites as SCs, critical technical issues and the future feasibility of this endeavor are highlighted. Discussion is also extended to the transformation of renewable and low-attractive CNCs to conductive nanocomposites using green approaches. This review also addresses the key scientific achievements and industrial uses of nanoscale materials and composites for energy conversion and storage applications.

Applications of Starch Biopolymers for a Sustainable Modern Agriculture

Protected cultivation in modern agriculture relies extensively on plastic-originated mulch films, nets, packaging, piping, silage, and various applications. Polyolefins synthesized from petrochemical routes are vastly consumed in plasticulture, wherein PP and PE are the dominant commodity plastics. Imposing substantial impacts on our geosphere and humankind, plastics in soil threaten food security, health, and the environment. Mismanaged plastics are not biodegradable under natural conditions and generate problematic emerging pollutants such as nano-micro plastics. Post-consumed petrochemical plastics from agriculture face many challenges in recycling and reusing due to soil contamination in fulfilling the zero waste hierarchy. Hence, biodegradable polymers from renewable sources for agricultural applications are pragmatic as mitigation. Starch is one of the most abundant biodegradable biopolymers from renewable sources; it also contains tunable thermoplastic properties suitable for diverse applications in agriculture. Functional performances of starch such as physicomechanical, barrier, and surface chemistry may be altered for extended agricultural applications. Furthermore, starch can be a multidimensional additive for plasticulture that can function as a filler, a metaphase component in blends/composites, a plasticizer, an efficient carrier for active delivery of biocides, etc. A substantial fraction of food and agricultural wastes and surpluses of starch sources are underutilized, without harnessing useful resources for agriscience. Hence, this review proposes reliable solutions from starch toward timely implementation of sustainable practices, circular economy, waste remediation, and green chemistry for plasticulture in agriscience

Plastic Waste Management in India: Challenges, Opportunities, and Roadmap for Circular Economy

Plastic waste (PW) is one of the most rapid-growing waste streams in municipal solid waste all over the world. India has become a global player in the plastic value chain. Despite low consumption, domestic generation and imports create a significant burden on the overall waste management system, which requires in-depth understanding of the scenario and pathways that can mitigate the crisis. Although Indian researchers have widely researched technology-related issues in academic papers, a substantial knowledge gap exists in understanding the problem’s depth and possible solutions. This review article focuses on current plastic production, consumption, and waste generation in India. This review article mainly analyzes data and information regarding Indian PW management and highlights some critical issues such as reverse supply chain, effective PW management, source-specific recovery, and PW rules in India. Comprehensively, this review will help to identify implementable strategies for policymakers and research opportunities for future researchers in holistic PW management and recycling in India, focusing on the circular economy and sustainable development goals.

Current Trends in Waste Plastics’ Liquefaction into Fuel Fraction: A Review

Polymers and plastics are crucial materials in many sectors of our economy, due to their numerous advantages. They also have some disadvantages, among the most important are problems with the recycling and disposal of used plastics. The recovery of waste plastics is increasing every year, but over 27% of plastics are landfilled. The rest is recycled, where, unfortunately, incineration is still the most common management method. From an economic perspective, waste management methods that lead to added-value products are most preferred—as in the case of material and chemical recycling. Since chemical recycling can be used for difficult wastes (poorly selected, contaminated), it seems to be the most effective way of managing these materials. Moreover, as a result this of kind of recycling, it is possible to obtain commercially valuable products, such as fractions for fuel composition and monomers for the reproduction of polymers. This review focuses on various liquefaction technologies as a prospective recycling method for three types of plastic waste: PE, PP and PS.

Pyrolysis of waste surgical masks into liquid fuel and its life-cycle assessment

Pyrolysis of the middle layer of a surgical mask (MLM) and inner and outer layers of a surgical mask (IOM) was performed to assess their potential valorization as waste-to-energy feedstocks, and the characteristics of the resulting products were investigated. Pyrolysis of the main organics in waste surgical masks occurred at a very narrow temperature range of 456-466 °C. The main product was carbon-rich and oxygen-deficient liquid oil with a high heating value (HHV) of 43.5 MJ/kg. From the life-cycle perspective, environmental benefits and advantages of this upcycling approach were verified compared with conventional waste management approaches. This study advocated the potential application of waste surgical masks as feedstocks for fuels and energy, which is beneficial to mitigate plastic pollution and achieve sustainable plastic waste-to-energy upcycling, simultaneously.

Recent Trends in the Pyrolysis of Non-Degradable Waste Plastics

Waste plastics are non-degradable constituents that can stay in the environment for centuries. Their large land space consumption is unsafe to humans and animals. Concomitantly, the continuous engineering of plastics, which causes depletion of petroleum, poses another problem since they are petroleum-based materials. Therefore, energy recovering trough pyrolysis is an innovative and sustainable solution since it can be practiced without liberating toxic gases into the atmosphere. The most commonly used plastics, such as HDPE, LDPE (high- and low-density polyethylene), PP (polypropylene), PS (polystyrene), and, to some extent, PC (polycarbonate), PVC (polyvinyl chloride), and PET (polyethylene terephthalate), are used for fuel oil recovery through this process. The oils which are generated from the wastes showed caloric values almost comparable with conventional fuels. The main aim of the present review is to highlight and summarize the trends of thermal and catalytic pyrolysis of waste plastic into valuable fuel products through manipulating the operational parameters that influence the quality or quantity of the recovered results. The properties and product distribution of the pyrolytic fuels and the depolymerization reaction mechanisms of each plastic and their byproduct composition are also discussed.

A Novel Study of Synthesis and Experimental Investigation on Hybrid Biocomposites for Biomedical Orthopedic Application

In recent years the biocomposites are highly utilized in the biomedical applications, due to excellent strength as well as weight ratio. A lot of natural fibers, namely, flax, hemp, jute, kenaf, and sisal are cheaply available in colossal amount. Aim of this study, a novel approach, is executed for construction of biomedical orthopedic parts by using mixture of natural fibers. This work handled biocomposites such as flax fiber (FX), chicken feather fiber (CF), kenaf fiber (KF), and rice husk fiber (RH) effectively. From all these composites, four sets of mixed fibers with reinforcement of polylactic acid polymer used for creating orthopedic parts. The hand-lay-based methodology is undertaken for preparation of hybrid biocomposites. Parameters involved for this study are fiber types (KF + RH, RH + FX, FX + CF, and CF + KF), laminate count (2, 4, 6 and 8) infill density (30%, 60%, 90%, and 120%), and raster angle (0/60, 30/120, 50/140, and 70/160). Finding of this work is dimensional accuracy, flexural strength, and shore hardness that are analyzed by L16 orthogonal array. ANOVA statistical analysis is enhanced and enlightens the results of flexural strength and source hardness of the biocomposites. Amongst in four parameters, the fiber type parameter extremely contributes such as 40.50% in the flexural analysis. Similarly, laminate count parameter highly contributes such as 31.01% in the shore hardness analysis.

Compatibilization of Starch/Synthetic Biodegradable Polymer Blends for Packaging Applications: A Review

The health and environmental concerns of the usage of non-biodegradable plastics have driven efforts to explore replacing them with renewable polymers. Although starch is a vital renewable polymer, poor water resistivity and thermo-mechanical properties have limited its applications. Recently, starch/synthetic biodegradable polymer blends have captured greater attention to replace inert plastic materials; the question of ‘immiscibility’ arises during the blend preparation due to the mixing of hydrophilic starch with hydrophobic polymers. The immiscibility issue between starch and synthetic polymers impacts the water absorption, thermo-mechanical properties, and chemical stability demanded by various engineering applications. Numerous studies have been carried out to eliminate the immiscibility issues of the different components in the polymer blends while enhancing the thermo-mechanical properties. Incorporating compatibilizers into the blend mixtures has significantly reduced the particle sizes of the dispersed phase while improving the interfacial adhesion between the starch and synthetic biodegradable polymer, leading to fine and homogeneous structures. Thus, Significant improvements in thermo-mechanical and barrier properties and water resistance can be observed in the compatibilized blends. This review provides an extensive discussion on the compatibilization processes of starch and petroleum-based polymer blends.

From outbreak of COVID-19 to launching of vaccination drive: invigorating single-use plastics, mitigation strategies, and way forward

The unforeseen outbreak of the COVID-19 epidemic has significantly stipulated the use of plastics to minimize the exposure and spread of the novel coronavirus. With the onset of the vaccination drive, the issue draws even more attention due to additional demand for vaccine packaging, transport, disposable syringes, and other allied devices scaling up to many million tonnes of plastic. Plastic materials in personal protective equipment (PPE), disposable pharmaceutical devices, and packaging for e-commerce facilities are perceived to be a lifesaver for the frontline healthcare personnel and the general public amidst recurring waves of the pandemic. However, the same material poses a threat as an evil environmental polluter when attributed to its indiscriminate and improper littering as well as mismanagement. The review not only highlights the environmental consequences due to the excessive use of disposable plastics amidst COVID-19 but also recommends mixed approaches to its management by adopting the combined and step-by-step methodology of adequate segregation, sterilization, sanitization activities, technological intervention, and process optimization measures. The overview finally concludes with some crucial way-forward measures and recommendations like the development of bioplastics and focusing on biodegradable/bio-compostable material alternatives to holistically deal with future pandemics.

Utilization of liquid product through pyrolysis of LDPE and C/LDPE as commercial wax

In this study, pyrolysis of low-density polyethylene (LDPE) and LDPE with aluminum (C/LDPE) wastes was carried out with different heating rates (5, 10, 20 °C/min) at different temperatures (400, 600, 800 °C). Product yields of LDPE and C/LDPE wastes were compared, and optimum liquid products were analyzed to utilize as commercial waxes for future use. The properties of pyrolyzed wastes was investigated with proximate, elemental analysis, and TGA. The as-produced liquid from pyrolysis of wastes was characterized by different characteristic tools, such as elemental analyses, GC-MS analyses, 1H-NMR tests, FT-IR spectra, the density, melting point, and carbon residue to compare commercial waxes. As a result of pyrolysis, the highest liquid product yield was achieved at 800 °C with 5 °C/min heating rate (85.87%) and at 600 °C with 5 °C/min heating rate (71.3%) for LDPE and C/LDPE, respectively. The results indicated that the derived liquid products are similar to commercial heavy wax.

Enhancement of Methanogenic Activity in Volumetrically Undersized Reactor by Mesophilic Co-Digestion of Sewage Sludge and Aqueous Residue

To date, energy recovery from biological sewage sludge (BSS) by anaerobic digestion has been very popular. However, it can often happen that anaerobic reactors are volumetrically undersized, thus reducing performance in terms of biogas production. A continuous-flow pilot-scale plant was used to investigate, for the first time, the effects of mesophilic anaerobic co-digestion (MACoD) of sewage sludge and aqueous residue (AR) from a biosolids treatment plant (BTP) on methanogenic activity under low hydraulic retention time (HRT) conditions (to simulate the undersizing of the reactor). The results showed that the digestate is always more rapidly biodegradable than the matrices fed, while particulate COD hydrolyzed (12 ± 1.3%) is independent of the quantity of AR dosed. Feeding over 35% of soluble OLR, the total VFAs in the system strongly decreased, despite the low HRT. In correspondence with higher dosages of AR, the percentage of CH4 increased up to 77–78% and the CO2 CH4−1 ratio decreased to 0.25 ± 0.2. Specific methane production increased from 0.09 ± 0.01 m3CH4 kgCODremoved−1 with BSS alone to 0.28 ± 0.01 m3CH4CH4 kgCODremoved−1 in the case of BSS co-digested with AR. Moreover, co-digestion with AR from a BTP allowed continuous specific methanogenic activity to be enhanced from 1.76 ± 0.02 m3CH4 tVSS−1 d−1 to 6.48 ± 0.88 m3CH4 tVSS−1 d−1. Therefore, the MACoD of BSS and AR from a BTP could be a good solution to enhance methanogenic activity in a volumetrically undersized anaerobic digester with reduced HRT.

End-of-Life Options for (Bio)degradable Polymers in the Circular Economy

End-of-life options for plastics include recycling and energy recovery (incineration). Taking into account the polymeric waste, recycling is the intentional action that is aimed at reducing the amount of waste deposited in landfills by industrial use of this waste to obtain raw materials and energy. The incineration of waste leads to recovery of the energy only. Recycling methods divide on mechanical (reuse of waste as a full-valuable raw material for further processing), chemical (feedstock recycling), and organic (composting and anaerobic digestion). The type of recycling is selected in terms of the polymeric material, origin of the waste, possible toxicity of the waste, and its flammability. The (bio)degradable polymers show the suitability for every recycling methods. But recycling method should be used in such a form that it is economically justified in a given case. Organic recycling in a circular economy is considered to be the most appropriate technology for the disposal of compostable waste. It is addressed for plastics capable for industrial composting such as cellulose films, starch blends, and polyesters. The biological treatment of organic waste leads also to a decrease of landfills and thereby reducing methane emissions from them. If we add to their biodegradability the absence of toxicity, we have a biotechnological product of great industrial interest. The paper presents the overview on end-of-life options useful for the (bio)degradable polymers. The principles of the circular economy and its today development were also discussed.

A Review on Green Composites Based on Natural Fiber-Reinforced Polybutylene Succinate (PBS)

The need for utilization of environmentally friendly materials has emerged due to environmental pollution that is caused by non-biodegradable materials. The usage of non-biodegradable plastics has increased in the past decades in many industries, and, as a result, the generation of non-biodegradable plastic wastes has also increased. To solve the problem of non-biodegradable plastic wastes, there is need for fabrication of bio-based polymers to replace petroleum-based polymers and provide strategic plans to reduce the production cost of bioplastics. One of the emerging bioplastics in the market is poly (butylene succinate) (PBS) and it has been the biopolymer of choice due to its biodegradability and environmental friendliness. However, there are some disadvantages associated with PBS such as high cost, low gas barrier properties, and softness. To lower the cost of PBS and enhance its properties, natural lignocellulosic fibers are incorporated into the PBS matrix, to form environmentally friendly composites. Natural fiber-based biocomposites have emerged as materials of interest in important industries such as packaging, automobile, and construction. The bonding between the PBS and natural fibers is weak, which is a major problem for advanced applications of this system. As a result, this review paper discusses various methods that are employed for surface modification of the Fibers The paper provides an in-depth discussion on the preparation, modification, and morphology of the natural fiber-reinforced polybutylene succinate biocomposites. Furthermore, because the preparation as well as the modification of the fiber-reinforced biocomposites have an influence on the mechanical properties of the biocomposites, mechanical properties of the biocomposites are also discussed. The applications of the natural fiber/PBS biocomposites for different systems are also reported.

Dynamic pyrolysis behaviors, products, and mechanisms of waste rubber and polyurethane bicycle tires

Given their non-biodegradable, space-consuming, and environmentally more benign nature, waste bicycle tires may be pyrolyzed for cleaner energies relative to the waste truck, car, and motorcycle tires. This study combined thermogravimetry (TG), TG-Fourier transform infrared spectroscopy (TG-FTIR), and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) analyses to dynamically characterize the pyrolysis behavior, gaseous products, and reaction mechanisms of both waste rubber (RT) and polyurethane tires (PUT) of bicycles. The main devolatilization process included the decompositions of the natural, styrene-butadiene, and butadiene rubbers for RT and of urethane groups in the hard segments, polyols in the soft segments, and regenerated isocyanates for PUT. The main TG-FTIR-detected functional groups included C-H, C=C, C=O, and C-O for both waste tires, and also, N-H and C-O-C for the PUT pyrolysis. The main Py-GC/MS-detected pyrolysis products in the decreasing order were isoprene and D-limonene for RT and 4, 4'-diaminodiphenylmethane and 2-hexene for PUT. The kinetic, thermodynamic, and comprehensive pyrolysis index data verified the easier decomposition of PUT than RT. The pyrolysis mechanism models for three sub-stages of the main devolatilization process were best described by two-dimensional diffusion and two second-order models for RT, and the three consecutive reaction-order (three-halves order, first-order, and second-order) models for PUT.

Pyrolysis Conversion of Polymer Wastes to Noble Fuels in Conditions of the Slovak Republic

This paper deals with the pyrolysis conversion of synthetic waste materials into noble fuels, i.e., heating oils, gasoline, diesel, and carbon. The following article presents the principle and use of pyrolysis conversion of waste tires and plastics. The core of the paper is the determination of energy properties of noble fuels obtained from pyrolysis conversion and the possibility of their real use in industry. The aim of this paper is a technical-economic evaluation of the use of waste pyrolysis in practice in the Slovak Republic. Unlike various methods of waste management, there are also more efficient methods, which primarily have a positive effect on the ecology of our Earth and at the same time can be effectively used for the production of alternative fuels. One of these methods is the pyrolysis conversion of synthetic waste materials into noble fuels. It is an ecological, waste-free, economical, and economical disposal of waste with a full recovery of its energy and material components with reduced emissions, and therefore this direction of using synthetic waste for the conversion of alternative fuels contributes to sustainable development. A significant advantage of this waste management is considered to be the fact that only waste tires or chlorine-free plastics are used as input materials without other necessary raw materials obtained by other economic activity. Tires and plastics are generated daily as waste in every household.

Characterization of post-consumer plastic film waste from mixed MSW in Spain: A key point for the successful implementation of sustainable plastic waste management strategies

The purpose of this paper is to provide a full characterization of post-consumer plastic film recovered from mixed municipal solid waste (MSW) treatment plants in Spain. Currently, this type of plastic waste is not recycled due to technical or economic barriers and is still sent to landfill. Different types of municipal plastic waste (MPW) from manual and automated sorting were studied: i) colour plastic film recovered by ballistic separators and then manual sorting in different seasons; ii) colour plastic film recovered by automated sorting (air suction); and iii) white plastic film from primary manual sorting process. The samples were characterized by different techniques, including the ultimate and proximate analysis, Higher Heating Value (HHV) and Lower Heating Value (LHV), metal content, Thermogravimetric Analysis (TGA) and Derivative Thermogravimetry (DTG), Fourier Transform Infrared (FT-IR) analysis and Differential Scanning Calorimetry (DSC). The results were compared to those obtained for pretreated colour and white plastic film waste and contrasted with industrial recycled film granules of polyethylene (as a reference material for packaging film). Additionally, pretreated plastic film samples were also characterized by analyzing viscosity, Pressure-Volume-Temperature (PVT) diagram, specific heat capacity and halogen and sulphur contents. Characterization data from this study will contribute to identify and develop potential recycling alternatives for a more sustainable municipal plastic waste management, which is recognized as a priority in the European Circular Economy Action Plan to use resources in a more sustainable way.

Technical description and performance evaluation of different packaging plastic waste management's systems in a circular economy perspective

The plastic waste disposal strongly raised in importance in the recent past and it is approaching a critical situation worldwide, so requiring putting in practice the criteria of circular economy by avoiding meaningless policy responses against the plastic materials. The world of plastic materials includes a wide range of goods in all the sectors of our life: packaging, construction, biomedicals, etc. The answer to the plastic waste disposal is build an industrial network characterized by reliability, flexibility, sustainability, utility in the industrial cycle and ability to provide useful products to the market. The traditional processes including recycling and energy recovery fulfil only a part of these conditions and need to be assessed in correlation to their real effect on the circular economy such as the uses of the obtained products in the anthroposphere's life cycle, the burdens generated by the processes itself, etc. Among the possible processes that can be more sustainable if compared with the traditional ones, in a real circular economy perspective, those based on thermochemical exploitation of products obtained by plastics are discussed and assessed. The results show that it is possible to transform an expensive and non-resolving plastic waste management system in an industrial network having an intrinsic economic sustainability and, overall, a well-defined role in the economic chain of plastics. The results show that an integration between the present system with the production of petrochemical products, including oil/gasoline/syngas/…, strongly improve the economic performance of the overall waste system, allowing a larger savings of not-renewable resources, a limited greenhouse burden, a release in the market of valuable products instead of poor quality materials and the minimization of waste destined to be landfilled.