Understanding and improving transgene stability and expression in insects for SIT and conditional lethal release programs

A transposon-based genetic marker for conspecific identity within the Bactrocera dorsalis species complex

Here we describe a molecular approach to assess conspecific identity that relies on the comparison of an evolved mutated transposable element sequence and its genomic insertion site in individuals from closely related species. This was explored with the IFP2 piggyBac transposon, originally discovered in Trichoplusia ni as a 2472 bp functional element, that was subsequently found as mutated elements in seven species within the Bactrocera dorsalis species complex. In a B. dorsalis [Hendel] strain collected in Kahuku, Hawaii, a degenerate 2420 bp piggyBac sequence (pBacBd-Kah) having ~ 94.5% sequence identity to IFP2 was isolated, and it was reasoned that common species, or strains within species, should share the same evolved element and its precise genomic insertion site. To test this assumption, PCR using primers to pBacBd-Kah and adjacent genomic sequences was used to isolate and compare homologous sequences in strains of four sibling species within the complex. Three of these taxa, B. papayae, B. philippinensis, and B. invadens, were previously synonymized with B. dorsalis, and found to share nearly identical pBacBd-Kah homologous elements (> 99% nucleotide identity) within the identical insertion site consistent with conspecific species. The fourth species tested, B. carambolae, considered to be a closely related yet independent species sympatric with B. dorsalis, also shared the pBacBd-Kah sequence and insertion site in one strain from Suriname, while another divergent pBacBd-Kah derivative, closer in identity to IFP2, was found in individuals from French Guiana, Bangladesh and Malaysia. This data, along with the absence of pBacBd-Kah in distantly related Bactrocera, indicates that mutated descendants of piggyBac, as well as other invasive mobile elements, could be reliable genomic markers for common species identity.

Comparison of classical and transgenic genetic sexing strains of Mediterranean fruit fly (Diptera: Tephritidae) for application of the sterile insect technique

The development of genetic sexing strains (GSSs) based on classical genetic approaches has revolutionized the application of the sterile insect technique (SIT) against the Mediterranean fruit fly Ceratitis capitata (Wiedemann) (Diptera: Tephritidae). The global use of Mediterranean fruit fly GSS for SIT applications as part of area-wide integrated pest management (AW-IPM) programmes is testimony to their effectiveness. During recent years, transgenic sexing strains (TSSs) have been developed through genetic engineering techniques offering the possibility to produce male-only progeny by introducing female embryonic lethal genes and to increase the efficacy to identify released sterile males by means of the expression of fluorescent transgene markers. Here, we present a comparative analysis of two Mediterranean fruit fly strains: the classical GSS VIENNA 8^D53-/Toliman and the transgenic FSEL#32. The strains were compared for production efficiency and quality control indices under semi mass-rearing conditions, response to sterilizing irradiation doses, male mating performance in walk-in field cages, and production cost of male-only pupae. The results showed that, the FSEL #32 TSS had a similar fecundity but a higher production of male-only pupae than the VIENNA 8^D53-/Toliman GSS. For some of the quality control parameters tested, such as pupal weight and survival under starvation conditions, the FSEL #32 TSS was inferior to the VIENNA 8^D53-/Toliman GSS. Both the transgenic and the classical genetic sexing strains have shown acceptable and similar mating competitiveness when compared with wild males for mating with wild females. The cost production for both strains is similar but the FSEL#32 TSS may potentially be more cost effective at higher production levels. The results are discussed in the context of incorporating the transgenic strain for SIT application.

Enhancing the stability and ecological safety of mass-reared transgenic strains for field release by redundant conditional lethality systems

The genetic manipulation of agriculturally important insects now allows the development of genetic sexing and male sterility systems for more highly efficient biologically-based population control programs, most notably the Sterile Insect Technique (SIT), for both plant and animal insect pests. Tetracycline-suppressible (Tet-off) conditional lethal systems may function together so that transgenic strains will be viable and fertile on a tetracycline-containing diet, but female-lethal and male sterile in tetracycline-free conditions. This would allow their most efficacious use in a unified system for sterile male-only production for SIT. A critical consideration for the field release of such transgenic insect strains, however, is a determination of the frequency and genetic basis of lethality revertant survival. This will provide knowledge essential to evaluating the genetic stability of the lethality system, its environmental safety, and provide the basis for modifications ensuring optimal efficacy. For Tet-off lethal survival determinations, development of large-scale screening protocols should also allow the testing of these modifications, and test the ability of other conditional lethal systems to fully suppress propagation of rare Tet-off survivors. If a dominant temperature sensitive (DTS) pupal lethality system proves efficient for secondary lethality in Drosophila, it may provide the safeguard needed to support the release of sexing/sterility strains, and potentially, the release of unisex lethality strains as a form of genetic male sterility. Should the DTS Prosβ2(1) mutation prove effective for redundant lethality, its high level of structural and functional conservation should allow host-specific cognates to be created for a wide range of insect species.

Postintegration stability of the silkworm piggyBac transposon

The piggyBac transposon is the most widely used vector for generating transgenic silkworms. The silkworm genome contains multiple piggyBac-like sequences that might influence the genetic stability of transgenic lines. To investigate the postintegration stability of piggyBac in silkworms, we used random insertion of the piggyBac [3 × p3 EGFP afm] vector to generate a W chromosome-linked transgenic silkworm, named W-T. Results of Southern blot and inverse PCR revealed the insertion of a single copy in the W chromosome of W-T at a standard TTAA insertion site. Investigation of 11 successive generations showed that all W-T females were EGFP positive and all males were EGFP negative; PCR revealed that the insertion site was unchanged in W-T offspring. These results suggested that endogenous piggyBac-like elements did not affect the stability of piggyBac inserted into the silkworm genome.

Not all GMOs are crop plants: non-plant GMO applications in agriculture

Since tools of modern biotechnology have become available, the most commonly applied and often discussed genetically modified organisms are genetically modified crop plants, although genetic engineering is also being used successfully in organisms other than plants, including bacteria, fungi, insects, and viruses. Many of these organisms, as with crop plants, are being engineered for applications in agriculture, to control plant insect pests or diseases. This paper reviews the genetically modified non-plant organisms that have been the subject of permit approvals for environmental release by the United States Department of Agriculture/Animal and Plant Health Inspection Service since the US began regulating genetically modified organisms. This is an indication of the breadth and progress of research in the area of non-plant genetically modified organisms. This review includes three examples of promising research on non-plant genetically modified organisms for application in agriculture: (1) insects for insect pest control using improved vector systems; (2) fungal pathogens of insects to control insect pests; and (3) virus for use as transient-expression vectors for disease control in plants.

A new powerful method for site-specific transgene stabilization based on chromosomal double-strand break repair

Transgenic insects are a promising tool in sterile insect techniques and population replacement strategies. Such transgenic insects can be created using nonautonomous transposons, which cannot be transferred without a transposase source. In biocontrol procedures where large numbers of insects are released, there is increased risk of transgene remobilization caused by external transposase sources that can alter the characteristics of the transgenic organisms lead horizontal transgene transfer to other species. Here we describe a novel, effective method for transgene stabilization based on the introduction of directed double-strand breaks (DSB) into a genome-integrated sequence and their subsequent repair by the single-strand annealing (SSA) pathway. Due to the construct's organization, the repair pathway is predictable, such that all transposon and marker sequences can be deleted, while preserving integration of exogenous DNA in the genome. The exceptional conservation of DNA repair pathways makes this method suitable for a broad range of organisms.

Recombination technologies for enhanced transgene stability in bioengineered insects

Transposon-based vectors currently provide the most suitable gene transfer systems for insect germ-line transformation and are used for molecular improvement of the Sterile Insect Technique. However, the long time stability of genome-integrated transposon constructs depends on the absence of transposase activity that could remobilize the transposon-embedded transgenes. To achieve transgene stability transposon vectors are usually non-autonomous, lacking a functional transposase gene, and chosen so that endogenous or related transposon activities are not present in the host. Nevertheless, the non-autonomous transposon-embedded transgenes could become unstable by the unintended presence of a mobilizing transposase that may have been undetected or subsequently entered the host species by horizontal gene transfer. Since the field release of transgenic insects will present environmental concerns relating to large populations and high mobility, it will be important to ensure that transgene constructs are stably integrated for maintaining strain integrity and eliminating the possibility for unintentional transfer into the genome of another organism. Here we review efficient methods to delete or rearrange terminal repeat sequences of transposons necessary for their mobility, subsequent to their initial genomic integration. These procedures should prevent transposase-mediated remobilization of the transgenes, ensuring their genomic stability.

Analysis of expressed sequence tags from a significant livestock pest, the stable fly (Stomoxys calcitrans), identifies transcripts with a putative role in chemosensation and sex determination

The stable fly, Stomoxys calcitrans L. (Diptera: Muscidae), is one of the most significant pests of livestock in the United States. The identification of targets for the development of novel control for this pest species, focusing on those molecules that play a role in successful feeding and reproduction, is critical to mitigating its impact on confined and rangeland livestock. A database was developed representing genes expressed at the immature and adult life stages of the stable fly, comprising data obtained from pyrosequencing both immature and adult stages and from small-scale sequencing of an antennal/maxillary palp-expressed sequence tag library. The full-length sequence and expression of 21 transcripts that may have a role in chemosensation is presented, including 13 odorant-binding proteins, 6 chemosensory proteins, and 2 odorant receptors. Transcripts with potential roles in sex determination and reproductive behaviors are identified, including evidence for the sex-specific expression of stable fly doublesex- and transformer-like transcripts. The current database will be a valuable tool for target identification and for comparative studies with other Diptera.

piggyBac-like elements in the pink bollworm, Pectinophora gossypiella

A transgenic line of the pink bollworm, Pectinophora gossypiella, a key lepidopteran cotton pest, was generated previously using the piggyBac transposon IFP2 from Trichoplusia ni. Here we identified an endogenous piggyBac-like element (PLE), designated as PgPLE1, in the pink bollworm. A putatively intact copy of PgPLE1 (PgPLE1.1) presents the canonical features of PLE: inverted terminal repeats with three C/G residues at the extreme ends, inverted subterminal repeats, TTAA target site and an open reading frame encoding transposase with 68% similarity to IFP2. Vectorette PCR revealed large variation in the insertion sites of PgPLE1 amongst worldwide populations, indicating the potential mobility of PgPLE1. The PgPLE1 was undetectable in the genome of Pectinophora endema, implying the recent invasion of PgPLE1 after the divergence of these two closely related species.

Conceptual framework and rationale

The sterile insect technique (SIT) has been shown to be an effective and sustainable genetic approach to control populations of selected major pest insects, when part of area-wide integrated pest management (AW-IPM) programmes. The technique introduces genetic sterility in females of the target population in the field following their mating with released sterile males. This process results in population reduction or elimination via embryo lethality caused by dominant lethal mutations induced in sperm of the released males. In the past, several field trials have been carried out for mosquitoes with varying degrees of success. New technology and experience gained with other species of insect pests has encouraged a reassessment of the use of the sterility principle as part of integrated control of malaria vectors. Significant technical and logistic hurdles will need to be overcome to develop the technology and make it effective to suppress selected vector populations, and its application will probably be limited to specific ecological situations. Using sterile males to control mosquito vector populations can only be effective as part of an AW-IPM programme. The area-wide concept entails the targeting of the total mosquito population within a defined area. It requires, therefore, a thorough understanding of the target pest population biology especially as regards mating behaviour, population dynamics, dispersal and level of reproductive isolation. The key challenges for success are: 1) devising methods to monitor vector populations and measuring competitiveness of sterile males in the field, 2) designing mass rearing, sterilization and release strategies that maintain competitiveness of the sterile male mosquitoes, 3) developing methods to separate sexes in order to release only male mosquitoes and 4) adapting suppression measures and release rates to take into account the high reproductive rate of mosquitoes. Finally, success in area-wide implementation in the field can only be achieved if close attention is paid to political, socio-economic and environmental sensitivities and an efficient management organization is established taking into account the interests of all potential stakeholders of an AW-IPM programme.

Development and utilization of transgenic New World screwworm, Cochliomyia hominivorax

The New World screwworm (NWS), Cochliomyia hominivorax (Coquerel) (Diptera: Calliphoridae), was the first insect to be effectively controlled using the sterile insect technique (SIT). Recent efforts to improve SIT control of this species have centred on the development of genetically transformed strains using the piggyBac transposon vector system. Eight transgenic strains were produced incorporating an enhanced green fluorescent protein (EGFP) marker gene under polyubiquitin regulation that has the potential for use as a genetic marking system for released males. The transgenic strains were genetically and phenotypically characterized, including for life fitness parameters and mating competitiveness. These characteristics were unique for each strain and thus some strains were deemed suitable for incorporation into SIT eradication programmes. The strain with the best attributes is designated 'CLAY'. Four of the strains, including CLAY, have been successfully cryopreserved so that their original characteristics should be unchanged when further evaluation is required. With the demonstration of efficient germ-line transformation in NWS, allowing production of fit and competitive transformants, it is now possible to consider further transgenic strain development to improve SIT that are currently being tested in other dipteran species. This includes strains that allow genetic marking with fluorescent proteins, genetic sexing by female lethality, male-specific fluorescent sorting and male sterility by testis-specific lethality. The SIT may also be improved upon by new strategies resulting in lethality of offspring of released insects using conditional lethal systems based upon temperature-dependent or dietary tetracycline regulation of lethal gene expression. Both the creation of new NWS transgenic strains and the ecological safety of their release will be enhanced by new vector systems that allow specific genomic targeting of vector constructs and their subsequent immobilization, ensuring transgene and strain stability.

Perspectives on the state of insect transgenics

Genetic transformation is a critical component to the fundamental genetic analysis of insect species and holds great promise for establishing strains that improve population control and behavior for practical application. This is especially so for insects that are disease vectors, many of which are currently subject to genomic sequence analysis, and intensive population control measures that must be improved for better efficacy and cost-effectiveness. Transposon-mediated germ-line transformation has been the ultimate goal for most fundamental and practical studies, and impressive strides have been made in recent development of transgene vector and marker systems for several mosquito species. This has resulted in rapid advances in functional genomic sequence analysis and new strategies for biological control based on conditional lethality. Importantly, advances have also been made in our ability to use these systems more effectively in terms of enhanced stability and targeting to specific genomic loci. Nevertheless, not all insects are currently amenable to germ-line transformation techniques, and thus advances in transient somatic expression and paratransgenesis have also been critical, if not preferable for some applications. Of particular importance is how this technology will be used for practical application. Early ideas for population replacement of indigenous pests with innocuous transgenic siblings by transposon-vector spread, may require reevaluation in terms of our current knowledge of the behavior of transposons currently available for transformation. The effective implementation of any control program using released transgenics, will also benefit from broadening the perspective of these control measures as being more mainstream than exotic.

Technology transfer from worms and flies to vertebrates: transposition-based genome manipulations and their future perspectives

To meet the increasing demand of linking sequence information to gene function in vertebrate models, genetic modifications must be introduced and their effects analyzed in an easy, controlled, and scalable manner. In the mouse, only about 10% (estimate) of all genes have been knocked out, despite continuous methodologic improvement and extensive effort. Moreover, a large proportion of inactivated genes exhibit no obvious phenotypic alterations. Thus, in order to facilitate analysis of gene function, new genetic tools and strategies are currently under development in these model organisms. Loss of function and gain of function mutagenesis screens based on transposable elements have numerous advantages because they can be applied in vivo and are therefore phenotype driven, and molecular analysis of the mutations is straightforward. At present, laboratory harnessing of transposable elements is more extensive in invertebrate models, mostly because of their earlier discovery in these organisms. Transposons have already been found to facilitate functional genetics research greatly in lower metazoan models, and have been applied most comprehensively in Drosophila. However, transposon based genetic strategies were recently established in vertebrates, and current progress in this field indicates that transposable elements will indeed serve as indispensable tools in the genetic toolkit for vertebrate models. In this review we provide an overview of transposon based genetic modification techniques used in higher and lower metazoan model organisms, and we highlight some of the important general considerations concerning genetic applications of transposon systems.

Transposon-free insertions for insect genetic engineering

Methods involving the release of transgenic insects in the field hold great promise for controlling vector-borne diseases and agricultural pests. Insect transformation depends on nonautonomous transposable elements as gene vectors. The resulting insertions are stable in the absence of suitable transposase, however, such absence cannot always be guaranteed. We describe a method for post-integration elimination of all transposon sequences in the pest insect Medfly, Ceratitis capitata. The resulting insertions lack transposon sequences and are therefore impervious to transposase activity.

Optimal life stage for radiation sterilization of Anopheles males and their fitness for release

Mating by male Anopheles mosquitoes (Diptera: Culicidae) was evaluated in the laboratory to assess fitness effects of radio-sterilization applied during different life stages of the malaria vectors An. stephensi Liston and An. gambiae Giles sensu stricto. After reproductive sterilization by gamma-irradiation (120 Gy), equal proportions of sterile and fertile (unirradiated) male adults were released into cages with virgin females and allowed to compete for matings. Radio-sterilization was applied when the males were pupae aged 0-7 h or 24-32 h, or adults aged <24 h or 24-55 h. After being radio-sterilized in the adult stage, males of both species competed effectively with unirradiated males, whereas those sterilized in the pupal stage obtained significantly fewer matings than unirradiated males from the same cohort. There was no evidence of females obtaining multiple inseminations. These findings emphasize the need to radio-sterilize males as adults in order to minimize the fitness cost. Such males may be intended for sterile insect technique population suppression or for trial releases of transgenic anophelines.

Site-specific genomic targeting in Drosophila

Transcriptional regulation of transgenes depends upon genomic localization in higher eukaryotes. For the applied use of transgenic organisms as producers of pharmaceutically relevant proteins or as pest population control agents, a method to make transgene expression predictable is highly desirable. A targeting method that allows precise cassette replacement comprising solely genes of interest (without extraneous donor vector sequences) would be highly advantageous for insects and other multicellular organisms. In this report, we describe a method for transgene targeting to predefined chromosomal sites in Drosophila by using a transposon vector that, once integrated in the germ line, acts as an acceptor site for donor vectors. To make recombinational insertions irreversible, a FLP recombinase-mediated cassette exchange strategy was used, and to enhance donor-target pairing, a homing sequence from the linotte locus was used. Site-specific recombinants were screened by interconvertible eye fluorescence marker phenotypes yielding, on average, targeted insertions at a frequency of 23%. The cassette exchange system provides for repetitive integrations into the same locus, allowing comparative analysis of true transgenic alleles. Furthermore, this method was used to stabilize a targeted transgene by the postintegration excision of putatively mobile transposon sequences. The genomic targeting and stabilization strategy described for Drosophila should be applicable to other insects, specifically for the goals of optimizing heterologous protein expression and enhancing ecological safety of transgenic strains intended for release in biocontrol programs.

Microarray analysis of genes showing variable expression following a blood meal in Anopheles gambiae

A microarray analysis of 14 900 genes of the malaria vector mosquito, Anopheles gambiae, shows that as many as 33% (4924) of their corresponding transcription products vary in abundance within 24 h after a blood meal. Approximately half (2388) of these products increase in their accumulation and the remainder (2536) decrease. Expression dynamics of 80% of the genes analysed by expressed sequence tag (EST) projects reported previously are consistent with the observations from this microarray analysis. Furthermore, the microarray analysis is more sensitive in detecting variation in abundance of gene products expressed at low levels and is more sensitive overall in that a greater number of regulated genes are detected. Major changes in transcript abundance were seen in genes encoding proteins involved in digestion, oogenesis and locomotion. The microarray data and an electronic hyperlinked version of all tables are available to the research community at http://www.angagepuci.bio.uci.edu/1/.

Isolation of white gene orthologue of the sawfly, Athalia rosae (Hymenoptera) and its functional analysis using RNA interference

We isolated and characterized the white gene orthologue of the sawfly, Athalia rosae (Hymenoptera). The A. rosae white (Ar white) cDNA cloned was 2058-bp long encoding 685 amino acids in a single open reading frame (ORF). Comparison of the cDNA sequence with the genomic DNA sequence revealed that the ORF was derived from 11 exons. Ar white was a single copy gene as evidenced by genomic Southern blotting and its cytological localization on the metaphase chromosomes. The deduced amino acid sequence aligned well with known insect white orthologous gene products sharing conserved regions such as the ATP-binding motif and the six transmembrane-spanning segments. Expression of Ar white was detected at embryonic and pupal stages by Northern blotting. In situ hybridization detected the embryonic expression in a pair of the lateral tips of protocephalic placodes from where optic organs are formed. Ar white function was examined using double-stranded RNA (dsRNA)-mediated interference. The synthesized dsRNA targeting Ar white transcripts caused a decrease in the level of the original mRNAs, and resulted in the white phenocopy in the embryonic eye pigmentation when microinjected into eggs from wild-type females. The effects occurred in a dose-dependent manner.

Preservation of a transgenic strain of the sawfly, Athalia rosae (Hymenoptera) by artificial fertilization using cryopreserved sperm

Germline transformation using a piggyBac-derived vector is feasible in the sawfly, Athalia rosae. A previously generated transgenic line carrying green fluorescence protein (GFP) genes as reporters was successfully maintained and preserved without consecutive rearing. Sperm taken from males that were frozen directly in liquid nitrogen and stored at -80 degrees C for a year were microinjected into mature unfertilized eggs dissected from female ovaries. A fraction of the sperm-injected eggs was fertilized and developed into diploid females, and all of them expressed GFP. Haploid male progeny from these females segregated into GFP-positive and GFP-negative individuals in a ratio of 1:1 indicating heterozygosity of the parental females. The GFP genes were stably inherited staying at the location where they were originally integrated.

Post-integration stabilization of a transposon vector by terminal sequence deletion in Drosophila melanogaster

Germline transformation systems for nearly 20 insect species have been derived from transposable elements, allowing the development of transgenic insects for basic and applied studies. These systems use a defective nonautonomous vector that results in stable vector integrations after the disappearance of transiently provided transposase helper plasmid, which is essential to maintain true breeding lines and consistent transgene expression that would otherwise be lost after vector remobilization. The risk of remobilization by an unintended transposase source has so far not been a concern for laboratory studies, but the prospective use of millions of transgenic insects in biocontrol programs will likely increase the risk, therefore making this a critical issue for the ecological safety of field release programs. Here we describe an efficient method that deletes a terminal repeat sequence of a transposon vector after genomic integration. This procedure prevents transposase-mediated remobilization of the other terminal sequence and associated genes, ensuring their genomic stability.