Simultaneous treatment of heat and high pressure homogenization of zein in ethanol–water solution: Physical, structural, thermal and morphological characteristics

Comparison of the effects of pectin with different esterification degrees on the thermal aggregation of wheat glutenin and gliadin

Our previous study found that pectin with different degrees of esterification (DE) could affect the thermal aggregation of gluten, but the mechanism was not clear. Analyzing the thermal aggregation of glutenin and gliadin supplemented with pectin can clarify this mechanism. With the increase of temperature, the particle size, disulfide bonds and β-sheet of glutenins increased, the surface hydrophobicity (H0) and fluorescence intensity decreased, and the network gradually aggregated, but the change trend of gliadins was opposite. These results suggested that the thermal aggregation of gluten mainly depended on glutenin. Glutenin and gliadin supplemented with low ester pectin (LEP) were in an aggregated state. At 95 °C, LEP (DE = 37 %) increased the particle size of glutenin and gliadin (141.83 μm and 19.91 μm), promoted the conversion of thiol to disulfide bonds, increased β-sheet (34.01 % and 31.13 %), decreased fluorescence intensity (2186.33 and 5165.33) and H0 (49.65 and 369.26). Scanning electron microscope (SEM) indicated that glutenin and gliadin supplemented with LEP retained a dense network structure, especially glutenin. This study elucidated the specific mechanism of how pectin affected the thermal aggregation of gluten. These results provide a more comprehensive theoretical support and scientific basis for understanding how pectin regulates the final quality of gluten-based products.

Fabrication and characterization of curcumin-loaded composite nanoparticles based on high-hydrostatic-pressure-treated zein and pectin: Interaction mechanism, stability, and bioaccessibility

We successfully designed curcumin (Cur)-loaded composite nanoparticles consisting of high-hydrostatic-pressure-treated (HHP-treated) zein and pectin with a pressure of 150 MPa (zein-150 MPa-P-Cur), showing nano-spherical structure with high zeta-potential (-36.72 ± 1.14 mV) and encapsulation efficiency (95.64 ± 1.23 %). We investigated the interaction mechanism of the components in zein-150 MPa-P-Cur using fluorescence spectroscopy, molecular dynamics simulation, Fourier-transform infrared spectrometry and scanning electron microscopy techniques. Compared with zein-P-Cur, the binding sites and binding energy (-53.68 kcal/mol vs. - 44.22 kcal/mol) of HHP-treated zein and Cur were increased. Meanwhile, the interaction force among HHP-treated zein, pectin, and Cur was significantly enhanced, which formed a tighter and more stable particle structure to further improve package performance. Additionally, Cur showed the best chemical stability in zein-150 MPa-P-Cur. And the bioavailability of Cur was increased to 65.53 ± 1.70 %. Collectively, composite nanoparticles based on HHP-treated zein and pectin could be used as a promising Cur delivery system.

Effects of plasma-activated slightly acidic electrolyzed water on salmon myofibrillar protein: Insights from structure and molecular docking

The present study investigated the impact of plasma-activated water (PAW), slightly acidic electrolytic water (SAEW) and plasma-activated slightly acidic electrolytic water (PASW) treatment on myofibrillar protein (MP) in salmon fillets. Additionally, the interaction mechanism between myosin and reactive oxygen species was explored by molecular docking. Compared with the control group (719.26 nm), PASW treatment group exhibited the smallest particle size (408.97 nm). The PASW treatment exhibited efficacy in reducing MP aggregation and inhibiting protein oxidation. In comparison with other treatments, PASW treatment demonstrated a greater ability to mitigate damage to the secondary and tertiary structures of MP. O3 and H2O2 interact with myosin through hydrogen bonding. Specifically, O3 interacts with Lys676, Gly677, and Met678 of myosin while H2O2 binds to Thr681, Asp626, Arg680, and Met678. This study offers novel insights into the impact of PASW on MP, and provides a theoretical foundation for its application in aquatic product processing.

pH-induced interaction mechanism of zearalenone with zein: Binding characteristics, conformational structure and intermolecular forces

Zein-bound zearalenone (ZEN) complexes are naturally existed in maize by their spontaneous interaction, which significantly impacts the risk assessment of ZEN. Additionally, the pH levels in processing could affect the binding or release of zein-bound ZEN. In this study, pH-induced interaction mechanism of ZEN with zein were studied. Results showed that the acid conditions increased the binding constant (Ka) from 3.46 to 10.0 × 104 L/mol, binding energy from -17.38 to -43.49 kJ mol-1. By increasing hydrophobic interaction and hydrogen bond of ZEN with zein, the binding of ZEN with zein was promoted, forming zein-bound ZEN. Whereas, alkaline conditions decreased the Ka to 1.45 × 104 L/mol and binding energy to 148.48 kJ mol-1, weakened ZEN-zein interaction and stretched zein molecules, resulting the release of ZEN from zein. This study could provide important theoretical basis for perfecting risk assessment and controlling zein-bound ZEN during processing.

Emerging Zein-Bound Zearalenone in Maize: Thermal-Induced Mechanism of Binding or Releasing

The emerging zein-bound zearalenone (ZEN) in maize could affect its nutrition and health. Besides, thermal processing could affect the zein-ZEN interaction, causing the binding or release of ZEN. To control the harm of zein-bound ZEN on the quality of maize, the thermal-induced mechanism of binding or releasing of zein-bound ZEN were studied. Results showed that thermal processing decreased the binding constant from 1.70 to 0.27 × 104 L mol-1, and binding energy from -78.41 to -32.51 kJ mol-1, with the decreased hydrogen bonds, hydrophobic, and electrostatic interactions of ZEN with Leu81 and Arg85, Val125, Ala129, and Gln132. Furthermore, thermal processing destroyed the interactions among zein molecules and caused the unwinding of zein, releasing the ZEN from the hydrophobic cavity of zein. This paper provided theoretic insights into the heat-induced binding/releasing mechanism of ZEN with zein, which helped to perfect the exposure risk evaluation of ZEN (including free and zein-bound ZEN) in maize-based products.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

The Impact of High-Pressure Homogenization and Thermal Processing on the Functional Properties of De-Fatted Chickpea Flour Dispersion

Defatted chickpea flour (DCF), a rich source of protein and starch, is frequently utilized in the food industry. Two crucial methods of modifying food materials are high-pressure homogenization (HPH) and heat treatment (HT). This study investigates the effect of co-treatment (HPH-HT) on the particle size, rheological behavior, and thermal characteristics of DCF suspensions. The results indicate that both HPH and HT can result in a more uniform distribution of particle size in the suspensions. The effect of HPH on G' was observed to be reductionary, whereas HT increased it. Nevertheless, the HPH-HT treatment further amplified G' (notably in high-concentration DCF), which demonstrates that the solid properties of DCF are improved. The apparent viscosity of the suspensions increased with individual and combined treatments, with the HPH-HT treatment of DCF12% exhibiting the most significant increase (from 0.005 to 9.5 Pa·s). The rheological behavior of DCF8% with HPH-HT treatment was found to be comparable to that of DCF12% treated only with HT. In conclusion, HPH-HT treatment shows a synergistic impact of HPH and HT on the rheological properties of DCF suspensions, however, it has limited effect on the particle size distribution and freeze-thaw stability.

Dynamic high pressure treatments: current advances on mechanistic-cum-transport phenomena approaches and plant protein functionalization

Dynamic high pressure treatment (DHPT) either by high pressure homogenization or microfluidisation, is an emerging concept used in the food industry for new products development through macromolecules modifications in addition to simple mixing and emulsification action. Mechanistic understanding of droplets breakup during high pressure homogenization is used to understand how these compact and high molecular weight-sized globular plant proteins are affected during DHPTs. Plant protein needs to be functionalized for advanced use in food formulation. DHPTs brought changes in plant proteins' secondary, tertiary, and quaternary structures through alterations in intermolecular and intramolecular interactions, sulfhydryl groups, and disulfide bonds. These structural changes in plant proteins affected their functional and physicochemical properties like solubility, oil and water holding capacity, gelation, emulsification, foaming, and rheological properties. These remarkable changes made utilization of this concept in novel food system applications like in plant-based dairy analogues. Overall, this review provides a comprehensive and critical understanding of DHPTs on their mechanistic and transport approaches for droplet breakup, structural and functional modification of plant macromolecules. This article also explores the potential of DHPT for formulating plant-based dairy analogues to meet healthy and sustainable food consumption needs. HIGHLIGHTSIt critically reviews high pressure homogenization (HPH) and microfluidisation (DHPM).It explores the mechanistic and transport phenomena approaches of HPH and DHPMHPH and DHPM can induce conformational and structural changes in plant proteins.Improvement in the functional properties of HPH and DHPM treated plant proteins.HPH and DHPM are potentially applicable for plant based dairy alternatives food system.

Improving myofibrillar proteins solubility and thermostability in low-ionic strength solution: A review

The development of myofibrillar proteins drinks (MPDs) can provide meat protein nutrition to specific groups of people. However, one major challenge is that myofibrillar proteins (MPs) are insoluble in solutions with a low ionic strength. Another functional constraint is the susceptibility of MPs to heat-induced aggregation. Currently, the primary approach used to improve the water solubility of MPs is to inhibit the assembly of myofilaments. Increasing the thermostability of MPs primarily inhibits the aggregation of myosin or oxidizes myosin to soluble substances. This review focuses on the description of several chemical and physical strategies, with an emphasis on the advantages, disadvantages, and recent progress. Under the myosin filament assembly process and the cross-linking aggregation mechanism, this summary helps improve our understanding of the solution and thermostability of MPs in low-ionic-strength solutions, thus providing new ideas to the development of MPDs.

Preparation of Natural Food-Grade Core-Shell Starch/Zein Microparticles by Antisolvent Exchange and Transglutaminase Crosslinking for Reduced Digestion of Starch

The purpose of this study was to slow down the digestibility of starch granules by encapsulating it in zein shells. Drop of the preformed swollen corn starch (CS) granule suspension into thermal-treated zein ethanolic solution enables antisolvent precipitation of thermal-treated zein on the surface of the preformed swollen CS granules, leading to the formation of core-shell starch/zein microparticles. Confocal laser scanning microscopy images showed that the preformed swollen CS granules were coated by thermal-treated zein shells with a thickness of 0.48–0.95 μm. The volume average particle diameter of core-shell starch/zein microparticles was 14.70 μm and reached 18.59–30.98 μm after crosslinking by transglutaminase. The results of X-ray diffraction and Fourier transform infrared spectroscopy demonstrated that an interaction occurred between the preformed swollen CS granules and the thermal-treated zein. The results for thermodynamic characteristics, pasting properties, and swelling power indicated that the compact network structure of core-shell starch/zein microparticles crosslinked by transglutaminase could improve starch granule thermal stability and resistance to shearing forces. Compared to native CS, the peak gelatinization temperatures of core-shell starch/zein microparticles increased significantly (p < 0.05), with a maximum value of 76.64°C. The breakdown values and the swelling power at 95°C of core-shell starch/zein microparticles significantly (p < 0.05) decreased by 52.83–85.66% and 0.11–0.28%, respectively. The in vitro digestibility test showed that the contents of slowly digestible starch and resistant starch in the core-shell starch/zein microparticles increased to ∼42.66 and ∼34.75%, respectively, compared to those of native CS (9.56 and 2.48%, respectively). Our research supports the application of food-grade core-shell starch/zein microparticles to formulate low-digestibility food products.

Surface-Tailored Zein Nanoparticles: Strategies and Applications

Plant-derived proteins have emerged as leading candidates in several drug and food delivery applications in diverse pharmaceutical designs. Zein is considered one of the primary plant proteins obtained from maize, and is well known for its biocompatibility and safety in biomedical fields. The ability of zein to carry various pharmaceutically active substances (PAS) position it as a valuable contender for several in vitro and in vivo applications. The unique structure and possibility of surface covering with distinct coating shells or even surface chemical modifications have enabled zein utilization in active targeted and site-specific drug delivery. This work summarizes up-to-date studies on zein formulation technology based on its structural features. Additionally, the multiple applications of zein, including drug delivery, cellular imaging, and tissue engineering, are discussed with a focus on zein-based active targeted delivery systems and antigenic response to its potential in vivo applicability.

Comparison of the characteristics of prolamins among foxtail millet varieties with different palatability: Structural, morphological, and physicochemical properties

Recently, there are considerable interests in the influence of prolamins on eating quality of grains. To inquire the potential effect of prolamins on the palatability of foxtail millet, prolamin characteristics under its raw (PR) and post-cooked (PC) state among three typical varieties with high (Zhonggu, ZG), medium (Zhaonong, ZN), and low (Hongmiao, HM) palatability were compared. The distinctive differences in amino acid composition, molecular structure, physicochemical properties were found in PRs and PCs, especially for HM variety. HM-PR recorded the lowest hydrophobic amino acids and surface hydrophobicity while having the superior hydration properties. The lowest denaturation temperature was found in HM-PR, which also had the highest denaturation enthalpy (ΔH). Nevertheless, HM-PR exhibited irregularly spherical protein body with the largest mean diameter. Evidenced by the highest random coil and lower α-helix and β-sheet content, a less stable secondary structure of HM-PR was found, corresponding to the most intensified disulfide cross-linking and protein aggregations in HM upon cooking. Overall, HM-PR was presumed to greatly affect the hydro-thermal utilization efficiency of starch granules during cooking, given the steric-hindrance effect of prolamins on granules in endosperm. The Present study provided new insights into the role of prolamins on foxtail millet palatability.

Injectable hydrogel for co-delivery of 5-azacytidine in zein protein nanoparticles with stem cells for cardiac function restoration

Heart failure is major cause of mortality associated with mostly Myocardial infarction (MI). Transplanting mesenchymal stem cells (MSC) have exhibited potential role in myocardial regeneration. Secretion of immune-modulatory cytokines and various growth factors after transplantation plays significant role in remodelling process of MI region. However, low retention, higher shear stress during administration and rejection at host infarct environment hinders therapeutic efficacy. Myocardial regeneration demands for accurate spatio-temporal delivery of MSCs with supportive vascular network that leads to improvement of cardiac function. In this study, injectable alginate based microporous hydrogel has been used to deliver 5-Azacytidine (5-Aza) in zein protein nanoparticle with MSCs for attenuating adverse cardiac remodelling after MI. Zein nanoparticles loaded with 5-Aza were prepared by liquid-liquid dispersion, and it was found that 35% of drug was released in 7 days supported with mathematical modelling. The presence of 5-Aza and zein in developed hydrogel supported in vitro MSC proliferation, migration and angiogenesis. Significant increased expression of cardiac specific markers, GATA4, MEF2C, MLC, SERCA and NKX2.5 was observed in vitro. 5-Aza loaded protein nanoparticle with MSCs encapsulated hydrogels in rat MI model also exhibited substantial improvement of functional cardiac parameters such as cardiac output and ejection fraction. Histopathological analysis showed reduced fibrosis, attenuated infarct expansion and cardiac tissue restoration and angiogenesis. In brief, we developed nanocarrier-hydrogel system a promising strategy for co-delivering 5-Aza as cardiac differentiation cue with MSCs to achieve higher cell retention and enhanced improvement in myocardial regeneration after MI.

Formulation and characterization of zein/gum arabic nanoparticles for the encapsulation of a rutin-rich extract from Ruta chalepensis L

Rutin, a plant flavonol characterized by a wide range of biological effects, has limited application in foods because of its low water solubility and scarce bioavailability. This work aimed to investigate the encapsulation of a rutin-rich extract (200.6 ± 1.5 mg/g of rutin) from Ruta chalepensis L. in zein nanoparticles (hydrodynamic diameter of 80-170 nm) prepared by antisolvent precipitation and stabilized by gum arabic (GA). The addition of GA (1:1 mass ratio with zein) significantly reduced the instability phenomena of zein nanoparticles through the deposition of a negatively charged layer as evidenced by the zeta potential and the UV-visible measurement, suggesting an electrostatic interaction between zein and GA. It also contributed to enhancing the encapsulation efficiency of rutin and inducing a rapid release during simulated digestion. These findings show that zein/GA nanoparticles represent a promising delivery system for natural extracts, fabricated through a facile and versatile process.

Effect of temperature and pH on the conversion between free and hidden zearalenone in zein

Food processing might induce the transformation of hidden ZEN (zein-bound ZEN) in maize. The objective of this study was to assess the effect of processing factors on free ZEN and hidden ZEN. After zein was treated under different temperature and pH, ZEN was quantified in samples before and after in vitro digestion. The ratios of hidden to total ZEN in zein are decreased from 54.25% to 40.74% after thermal treatment and from 54.25% to 0 after alkaline treatment, respectively. Conversely, acid treatment increased the ratio of hidden to total ZEN from 54.25% to 100%. Thus, it can be concluded that thermal or alkaline condition induced the conversion of hidden ZEN to free ZEN while acid condition promoted the ZEN-zein interactions to form the hidden ZEN. Overall, temperature and pH values played a vital role in the conversion of hidden ZEN during food processing.

Effect of temperature of preheated soy protein isolate on the structure and properties of soy protein isolate heated-vitamin D3 complex

In this paper, soy protein isolate (SPI) was preheated and combined with vitamin D₃ (VD₃ ) to study the protective effect of modified SPI on VD₃ . The structure and properties of the SPI with heat treatment-VD₃ (SPI(H)-VD₃ ) complex were determined. The secondary and tertiary structure of SPI(H)-VD₃ results showed that the content of α-helix decreased and the content of random coil increased, indicating that the rigid structure of the protein decreased, the flexibility increased, and the maximum fluorescence intensity wavelength was red shifted. When the heat treatment temperature was 85°C, the embedding rate of SPI(H)-VD₃ composite was the highest. As the heat treatment temperature increased, the internal hydrophobic groups of SPI were exposed, and the average particle size decreased significantly. The light stability results showed that the content of VD₃ in the SPI(H)-VD₃ composite at a heat treatment temperature of 85°C was significantly increased compared with the unheated SPI. PRACTICAL APPLICATIONS: This article mainly discusses the structure and properties of modified soy protein isolates bound to VD₃ by preheating soy protein isolates at different temperatures. It provides more possibilities for the application of VD₃ in food.

Fabrication of pea protein-curcumin nanocomplexes via microfluidization for improved solubility, nano-dispersibility and heat stability of curcumin: Insight on interaction mechanisms

Poor dispersibility of curcumin (cur) in aqueous medium and heat instability are common drawbacks preventing its efficiently practical use. Herein, the aim of this work was to reduce the size of cur crystals to the nanoscale through solid dispersion technique and subsequently stabilize them in an amorphous form. In this work, different ratios of pea protein (PP) to cur (6: 1, 12:1, 18:1 and 24:1, w/w) nano-supernatant (NS) in water were prepared via microfluidization. Results showed that particle size, Zeta potential (ZP) and cur concentration of cur in PP-cur NS in optimal conditions reached 357.45 nm, -33.43 mV and 81.68 mg/L, respectively. PP-cur NS showed excellent storage stability within one month and high heat stability of 52.32% at 90 °C after 180 min. Structural analysis including FT-IR, DSC and XRD indicated that cur entered into the hydrophobic pocket of PP by hydrophobic interactions and hydrogen bonds after microfluidization. This study indicated that PP exhibiting as an emulsifier and carrier might significantly reduce the surface tension of NS and in turns prolong their storability.

Effects of microfluidization and thermal treatment on the characterization and digestion of curcumin loaded protein–polysaccharide–tea saponin complex nanoparticles

Microfluidization (50–150 MPa) and thermal treatment (45–85 °C) were applied to modulate the stability, molecular interaction and microstructure of zein–proplyene glycol alginate (PGA)–tea saponin (TS) complex nanoparticles for delivery of curcumin.

Modifying the Physicochemical and Functional Properties of Water-soluble Protein from Mussels by High-pressure Homogenization Treatment

This study investigated the changes in physicochemical and functional properties of water-soluble protein from mussels (MWP) induced by high-pressure homogenization (HPH). The results indicated that HPH treatment unfolded or disrupted the initial structure of MWP, exposing free sulfhydryl groups and buried hydrophobic groups. As the homogenization pressure increased, the aggregation of MWP particles gradually decreased. Moreover, protein solubility and dispersion stability increased in aqueous solution. Foaming and emulsifying properties were also improved. HPH treatment has proven to be an effective technique for enhancing the functional properties of shellfish protein, and 120 MPa was the optimum homogenization pressure to modify MWP.

Effects of high-speed shear homogenization on the emulsifying and structural properties of myofibrillar protein under low-fat conditions

BACKGROUND

Emulsification is important for food quality and processing functionality. Most emulsification occurs under high-fat conditions that eventually cause health concerns. Protein emulsifiers also have drawbacks such as lower dispersity. This study considered the effects of different high-speed shear homogenization (HSH) speeds on the emulsifying and structural properties of myofibrillar proteins (MPs) under low-fat conditions.

RESULTS

High-speed shear homogenization significantly increased the emulsifying activity and emulsifying stability of MPs at lower speeds (8000 to 14 500 rpm). The primary structure of MP was not altered significantly by HSH, whereas its secondary, tertiary, and quaternary structures were changed. Particle size decreased first and then increased significantly, and reached a minimum when the HSH speed was 14 500 rpm. The absolute zeta potential values increased significantly and the dendritic fibrous structure of sample was destroyed when the speed exceeded 14 500 rpm. High-speed shear homogenization (14 500 rpm) decreased the particle size and unfolded the protein, which improved the emulsifying properties of MPs. Excessive HSH speeds (20 500 rpm or higher) caused an aggregation of MP molecules, which was not conducive to improving their emulsifying properties.

CONCLUSION

Optimal HSH speed was achieved at 14 500 rpm to modify MPs' emulsifying and structural properties under low-fatconditions. © 2019 Society of Chemical Industry.

Effects of High Pressure Modification on Conformation and Digestibility Properties of Oyster Protein

To expand the utilization of oyster protein (OP), the effects of high pressure (100 to 500 MPa) on chemical forces, structure, microstructure, and digestibility properties were investigated. High pressure (HP) treatment enhanced the electrostatic repulsion (from -13.3Control to -27.8HP200 mV) between protein molecules and avoided or retarded the formation of protein aggregates. In addition, the HP treated samples showed uniform distribution and small particle size. The changes in electrostatic interaction and particle size contributed to the improvement of solubility (from 10.53%Control to 19.92%HP500 at pH 7). The stretching and unfolding of protein were modified by HP treatment, and some internal hydrophobic groups and -SH groups were exposed. HP treatment modified the secondary structure of OP. The treated samples contained less α-helix and β-sheet structures, whereas the proportions of β-sheet and random coil structures were increased. The treated samples have high digestibility in the stomach (from 26.3%Control to 39.5%HP500) and in the total digestive process (from 62.1%Control to 83.7%HP500). In addition, the total digestive production showed higher percentages of small peptides (<1 kDa) after HP treatment. The protein solubility and digestibility were increased after HP treatment, and high solubility and high digestibility might increase the chance that OP become a kind of protein supplement.

Application of high-pressure homogenization for improving the physicochemical, functional and rheological properties of myofibrillar protein

The present work investigated effects of high-pressure homogenization (HPH) pressure (0, 40, 80 and 120 MPa) on physicochemical, functional and rheological properties of clam myofibrillar protein (CMP). Results showed that HPH changed the CMP secondary and tertiary structures. Absolute zeta potential and protein solubility increased but particle size and turbidity of CMP decreased after HPH treatment. Both of emulsifying properties and foaming properties were significantly improved. The shear stress, apparent viscosity and the viscosity coefficients reduced, but flow index increased. Application of HPH improved the physicochemical, functional and rheological properties of CMP, and 120 MPa was the optimal pressure for modification.

Sterile and Dual-Porous Aerogels Scaffolds Obtained through a Multistep Supercritical CO₂-Based Approach

Aerogels from natural polymers are endowed with attractive textural and biological properties for biomedical applications due to their high open mesoporosity, low density, and reduced toxicity. Nevertheless, the lack of macroporosity in the aerogel structure and of a sterilization method suitable for these materials restrict their use for regenerative medicine purposes and prompt the research on getting ready-to-implant dual (macro + meso)porous aerogels. In this work, zein, a family of proteins present in materials for tissue engineering, was evaluated as a sacrificial porogen to obtain macroporous starch aerogels. This approach was particularly advantageous since it could be integrated in the conventional aerogel processing method without extra leaching steps. Physicochemical, morphological, and mechanical characterization were performed to study the effect of porogen zein at various proportions (0:1, 1:2, and 1:1 zein:starch weight ratio) on the properties of the obtained starch-based aerogels. From a forward-looking perspective for its clinical application, a supercritical CO₂ sterilization treatment was implemented for these aerogels. The sterilization efficacy and the influence of the treatment on the aerogel final properties were evaluated mainly in terms of absence of microbial growth, cytocompatibility, as well as physicochemical, structural, and mechanical modifications.

Effects of High-Pressure Homogenization at Different Pressures on Structure and Functional Properties of Oyster Protein Isolates

Oyster protein isolate (OPI) suspensions (6.19 % ± 0.82 %, w/v) were treated by high-pressure homogenization (HPH) at 0 (control), 20, 40, 60, 80 or 100 MPa for three cycles. Protein profiles, secondary structure, free sulfhydryl, surface hydrophobicity, particle size distribution, zeta-potential, solubility, water and oil holding capacity (OHC), emulsifying and foaming properties of the obtained suspensions were analyzed. The results showed that HPH treatment did not cause changes in protein profiles of OPI, but caused changes in secondary structure, content of α-helix decreased but content of β-turn and random coil increased significantly (P < 0.05). Free sulfhydryl and surface hydrophobicity all increased significantly (P < 0.05) after HPH treatment, indicating that tertiary and quaternary structures changed. Functional properties of OPI significantly (P < 0.05) improved after HPH treatment, such as zeta-potential (from −12.67 to −33.57 mV), solubility (from 20.24 % to 57.99 %), OHC (from 981.77 % to 1229.40 %), foaming ability (from 17.50 % to 35.00 %), foaming stability (from 44.49 % to 66.60 %), emulsifying activity index (from 8.87 to 17.06 m2/g) and emulsion stability index (from 14.65 to 41.68 min). At 60 MPa and 80 MPa, the improvements were more remarkable. However, HPH treatment significantly (P < 0.05) decreased particle size (from 200–500 nm to 0–200 nm) and water holding capacity (from 341.15 % to 216.96 %). These improvements were closely related to structural changes and reduction of particle size. Application of different pressures affected functional properties of OPI. These results could provide information for determining HPH applying condition in OPI modification.

The Interaction between Zein and Lecithin in Ethanol-Water Solution and Characterization of Zein-Lecithin Composite Colloidal Nanoparticles

Lecithin, a naturally small molecular surfactant, which is widely used in the food industry, can delay aging, enhance memory, prevent and treat diabetes. The interaction between zein and soy lecithin with different mass ratios (20:1, 10:1, 5:1, 3:1, 2:1, 1:1 and 1:2) in ethanol-water solution and characterisation of zein and lecithin composite colloidal nanoparticles prepared by antisolvent co-precipitation method were investigated. The mean size of zein-lecithin composite colloidal nanoparticles was firstly increased with the rise of lecithin concentration and then siginificantly decreased. The nanoparticles at the zein to lecithin mass ratio of 5:1 had the largest particle size (263 nm), indicating that zein and lecithin formed composite colloidal nanoparticles, which might aggregate due to the enhanced interaction at a higher proportion of lecithin. Continuing to increase lecithin concentration, the zein-lecithin nanoparticles possibly formed a reverse micelle-like or a vesicle-like structure with zein in the core, which prevented the formation of nanoparticle aggregates and decreased the size of composite nanoparticles. The presence of lecithin significantly reduced the ζ-potential of zein-lecithin composite colloidal nanoparticles. The interaction between zein and lecithin enhanced the intensity of the fluorescence emission of zein in ethanol-water solution. The secondary structure of zein was also changed by the addition of lecithin. Differential scanning calorimetry thermograms revealed that the thermal stability of zein-lecithin nanoparticles was enhanced with the rise of lecithin level. The composite nanoparticles were relatively stable to elevated ionic strengths. Possible interaction mechanism between zein and lecithin was proposed. These findings would help further understand the theory of the interaction between the alcohol soluble protein and the natural small molecular surfactant. The composite colloidal nanoparticles formed in this study can broaden the application of zein and be suitable for incorporating water-insoluble bioactive components in functional food and beverage products.