A novel tool against multiresistant bacterial pathogens: lipopeptide modification of the natural antimicrobial peptide ranalexin for enhanced antimicrobial activity and improved pharmacokinetics

How can biomaterial-conjugated antimicrobial peptides fight bacteria and be protected from degradation?

The emergence of antibiotic-resistant bacteria is a serious threat to public health. Antimicrobial peptides (AMP) are a powerful alternative to antibiotics due to their low propensity to induce bacterial resistance. However, cytotoxicity and short half-lives have limited their clinical translation. To overcome these problems, AMP conjugation has gained relevance in the biomaterials field. Nevertheless, few studies describe the influence of conjugation on enzymatic protection, mechanism of action and antimicrobial efficacy. This review addresses this gap by providing a detailed comparison between conjugated and soluble AMP. Additionally, commonly employed chemical reactions and factors to consider when promoting AMP conjugation are reviewed. The overall results suggested that AMP conjugated onto biomaterials are specifically protected from degradation by trypsin and/or pepsin. However, sometimes, their antimicrobial efficacy was reduced. Due to limited conformational freedom in conjugated AMP, compared to their soluble forms, they appear to act initially by creating small protuberances on bacterial membranes that may lead to the alteration of membrane potential and/or formation of holes, triggering cell death. Overall, AMP conjugation onto biomaterials is a promising strategy to fight infection, particularly associated to the use of medical devices. Nonetheless, some details need to be addressed before conjugated AMP reach clinical practice. STATEMENT OF SIGNIFICANCE: Covalent conjugation of antimicrobial peptides (AMP) has been one of the most widely used strategies by bioengineers, in an attempt to not only protect AMP from proteolytic degradation, but also to prolong their residence time at the target tissue. However, an explanation for the mode of action of conjugated AMP is still lacking. This review extensively gathers works on AMP conjugation and puts forward a mechanism of action for AMP when conjugated onto biomaterials. The implications of AMP conjugation on antimicrobial activity, cytotoxicity and resistance to proteases are all discussed. A thorough review of commonly employed chemical reactions for this conjugation is also provided. Finally, details that need to be addressed for conjugated AMP to reach clinical practice are discussed.

Short-Chained Linear Scorpion Peptides: A Pool for Novel Antimicrobials

Scorpion venom peptides are generally classified into two main groups: the disulfide bridged peptides (DBPs), which usually target membrane-associated ion channels, and the non-disulfide bridged peptides (NDBPs), a smaller group with multifunctional properties. In the past decade, these peptides have gained interest because most of them display functions that include antimicrobial, anticancer, haemolytic, and anti-inflammatory activities. Our current study focuses on the short (9-19 amino acids) antimicrobial linear scorpion peptides. Most of these peptides display a net positive charge of 1 or 2, an isoelectric point at pH 9-10, a broad range of hydrophobicity, and a Grand Average of Hydropathy (GRAVY) Value ranging between -0.05 and 1.7. These features allow these peptides to be attracted toward the negatively charged phospholipid head groups of the lipid membranes of target cells, a force driven by electrostatic interactions. This review outlines the antimicrobial potential of short-chained linear scorpion venom peptides. Additionally, short linear scorpion peptides are in general more attractive for large-scale synthesis from a manufacturing point of view. The structural and functional diversity of these peptides represents a good starting point for the development of new peptide-based therapeutics.

Activities of a broad-spectrum antimicrobial peptide analogue SAMP-A4-C8 and its combat against pneumonia in Staphylococcus aureus-infected mice

Antimicrobial peptides and their analogues have become substitutes for antibiotics in recent years. The antimicrobial peptide analogue SAMP-A4-C8 (n-octanoic-VRLLRRRI) with high antimicrobial activity was found in our lab. We speculate that it may kill pathogens by some lethal mechanism of action. In the present investigation, the microbicidal activities of SAMP-A4-C8 and its mechanism of action were investigated. The results demonstrated that SAMP-A4-C8 had lethal activities against Staphylococcus aureus and Candida albicans by cell disruption. Based on its microbicidal activities, we believe that it is worth further research for its potential as drug candidate. The results showed that SAMP-A4-C8, with low propensity to induce the resistance of S. aureus and C. albicans, could kill the persister cells of S. aureus and C. albicans, exhibited biofilm forming inhibition activity and preformed biofilm eradication ability against S. aureus and C. albicans, and displayed therapeutic potential on pneumonia in S. aureus-infected mice by reducing lung inflammation. The present study provided a promising drug candidate in the war against multidrug resistance.

Very Large Pores Mesoporous Silica as New Candidate for Delivery of Big Therapeutics Molecules, Such as Pharmaceutical Peptides

The synthesis of a scaffold that can accommodate big molecules with a pharmaceutical role is important to shield them and maintain their biological activity. In this field, silica particles with large pores (LPMS) are innovative supports. Large pores allow for the loading of bioactive molecules inside the structure and contemporarily their stabilization and protection. These purposes cannot be achieved using classical mesoporous silica (MS, pore size 2-5 nm), because their pores are not big enough and pore blocking occurs. LPMSs with different porous structures are synthesized starting from an acidic water solution of tetraethyl orthosilicate reacting with pore agents (Pluronic^® F127 and mesitylene), performing hydrothermal and microwave-assisted reactions. Time and surfactant optimization were performed. Loading tests were conducted using Nisin as a reference molecule (polycyclic antibacterial peptide, with dimensions of 4-6 nm); UV-Vis analyses on loading solutions were performed. For LPMSs, a significantly higher loading efficiency (LE%) was registered. Other analyses (Elemental Analysis, Thermogravimetric Analysis and UV-Vis) confirmed the presence of Nisin in all the structures and its stability when loaded on them. LPMSs showed a lower decrease in specific surface area if compared to MS; in terms of the difference in LE% between samples, it is explained considering the filling of pores for LPMSs, a phenomenon that is not allowed for MSs. Release studies in simulated body fluid highlight, only for LPMSs, a controlled release, considering the longer time scale of release. Scanning Electron Microscopy images acquired before and after release tests shows the LPMSs' maintenance of the structure, demonstrating strength and mechanical resistance of structures. In conclusion, LPMSs were synthesized, performing time and surfactant optimization. LPMSs showed better loading and releasing properties with respect to classical MS. All collected data confirm a pore blocking for MS and an in-pore loading for LPMS.

Polysaccharides and lipoproteins as reactants for the synthesis of pharmaceutically important scaffolds: A review

The growing number of diseases in the past decade has once again highlighted the need for extensive research on the development of novel drugs. There has been a major expansion in the number of people suffering from malignant diseases and types of life-threatening microbial infections. The high mortality rates caused by such infections, their associated toxicity, and a growing number of microbes with acquired resistance necessitate the need to further explore and develop the synthesis of pharmaceutically important scaffolds. Chemical entities derived from biological macromolecules like carbohydrates and lipids have been explored and observed to be effective agents in the treatment of microbial infections and diseases. These biological macromolecules offer a variety of chemical properties that have been exploited for the synthesis of pharmaceutically relevant scaffolds. All biological macromolecules are long chains of similar atomic groups which are connected by covalent bonds. By altering the attached groups, the physical and chemical properties can be altered and molded as per the clinical applications and needs, this ring them potential candidates for drug synthesis. The present review establishes the role and significance of biological macromolecules by articulating various reactions and pathways reported in the literature.

Current Understanding of Modes of Action of Multicomponent Bioactive Phytochemicals: Potential for Nutraceuticals and Antimicrobials

Plants produce a diversity of plant secondary metabolites (PSMs), which function as defense chemicals against herbivores and microorganisms but also as signal compounds. An individual plant produces and accumulates mixtures of PSMs with different structural features using different biosynthetic pathways. Almost all PSMs exert one or several biological activities that can be useful for nutrition and health. This review discusses the modes of action of PSMs alone and in combinations. In a mixture, most individual PSMs can modulate different molecular targets; they are thus multitarget drugs. In an extract with many multitarget chemicals, additive and synergistic effects occur. Experiments with the model system Caenorhabditis elegans show that polyphenols and carotenoids can function as powerful antioxidative and longevity-promoting PSMs. PSMs of food plants and spices often exhibit antioxidant, anti-inflammatory, and antimicrobial properties, which can be beneficial for health and the prevention of diseases. Some extracts from food plants and spices with bioactive PSMs have potential for nutraceuticals and antimicrobials.

Design and Characterization of Myristoylated and Non-Myristoylated Peptides Effective against Candida spp. Clinical Isolates

The increasing resistance of fungi to antibiotics is a severe challenge in public health, and newly effective drugs are required. Promising potential medications are lipopeptides, linear antimicrobial peptides (AMPs) conjugated to a lipid tail, usually at the N-terminus. In this paper, we investigated the in vitro and in vivo antifungal activity of three short myristoylated and non-myristoylated peptides derived from a mutant of the AMP Chionodracine. We determined their interaction with anionic and zwitterionic membrane-mimicking vesicles and their structure during this interaction. We then investigated their cytotoxic and hemolytic activity against mammalian cells. Lipidated peptides showed a broad spectrum of activity against a relevant panel of pathogen fungi belonging to Candida spp., including the multidrug-resistant C. auris. The antifungal activity was also observed vs. biofilms of C. albicans, C. tropicalis, and C. auris. Finally, a pilot efficacy study was conducted on the in vivo model consisting of Galleria mellonella larvae. Treatment with the most-promising myristoylated peptide was effective in counteracting the infection from C. auris and C. albicans and the death of the larvae. Therefore, this myristoylated peptide is a potential candidate to develop antifungal agents against human fungal pathogens.

Effect of hydrophobicity on distinct anticancer mechanism of antimicrobial peptide chensinin-1b and its lipoanalog PA-C1b in breast cancer cells

Chensinin-1b and its lipoanalogs demonstrate different anticancer activities against selected cancer cells, and the anticancer activity of PA-C1b is improved up to 3-fold compared with that of the parent peptide chensinin-1b. However, detailing the mechanism of action of these peptides is required to better understand the structure-function relationship. In this study, chensinin-1b and PA-C1b were selected as the representative peptides to investigate the mode of action in cancer cells. The results indicated that the boundary of the cell membrane was broken when the cells were treated with chensinin-1b, while that of cells treated with PA-C1b remained intact based on morphological changes. Apoptosis assays indicated that PA-C1b induced MCF-7 cancer cell apoptosis, while chensinin-1b mainly damaged the cell membrane. MCF-7 cancer cells treated with the peptides induced the loss of mitochondrial membrane potential, and cytochrome c was released from mitochondria, but PA-C1b enhanced ROS generation. Additionally, PA-C1b uptake occurred via an energy-dependent pathway and was inhibited by selected endocytosis inhibitors. Furthermore, treatment of MCF-7 cells with PA-C1b suppressed Bcl-2 mRNA levels and increased Bax mRNA levels, upregulated the expression of the proapoptotic protein Bax and downregulated the expression of the antiapoptotic protein Bcl-2. These results indicate that the anticancer mechanism of AMPs may be considerably affected by only a slight difference in the hydrophobicity of the two peptides; and such a study may facilitate the design of novel peptide-based anticancer agents.

Low-cost production and application of lipopeptide for bioremediation and plant growth by Bacillus subtilis SNW3

At present time, every nation is absolutely concern about increasing agricultural production and bioremediation of petroleum-contaminated soil. Hence, with this intention in the current study potent natural surfactants characterized as lipopeptides were evaluated for low-cost production by Bacillus subtilis SNW3, previously isolated from the Fimkessar oil field, Chakwal Pakistan. The significant results were obtained by using substrates in combination (white beans powder (6% w/v) + waste frying oil (1.5% w/v) and (0.1% w/v) urea) with lipopeptides yield of about 1.17 g/L contributing 99% reduction in cost required for medium preparation. To the best of our knowledge, no single report is presently describing lipopeptide production by Bacillus subtilis using white beans powder as a culture medium. Additionally, produced lipopeptides display great physicochemical properties of surface tension reduction value (SFT = 28.8 mN/m), significant oil displacement activity (ODA = 4.9 cm), excessive emulsification ability (E24 = 69.8%), and attains critical micelle concentration (CMC) value at 0.58 mg/mL. Furthermore, biosurfactants produced exhibit excellent stability over an extensive range of pH (1-11), salinity (1-8%), temperature (20-121°C), and even after autoclaving. Subsequently, produced lipopeptides are proved suitable for bioremediation of crude oil (86%) and as potent plant growth-promoting agent that significantly (P < 0.05) increase seed germination and plant growth promotion of chili pepper, lettuce, tomato, and pea maximum at a concentration of (0.7 g/100 mL), showed as a potential agent for agriculture and bioremediation processes by lowering economic and environmental stress.

Antimicrobial Peptides: An Update on Classifications and Databases

Antimicrobial peptides (AMPs) are distributed across all kingdoms of life and are an indispensable component of host defenses. They consist of predominantly short cationic peptides with a wide variety of structures and targets. Given the ever-emerging resistance of various pathogens to existing antimicrobial therapies, AMPs have recently attracted extensive interest as potential therapeutic agents. As the discovery of new AMPs has increased, many databases specializing in AMPs have been developed to collect both fundamental and pharmacological information. In this review, we summarize the sources, structures, modes of action, and classifications of AMPs. Additionally, we examine current AMP databases, compare valuable computational tools used to predict antimicrobial activity and mechanisms of action, and highlight new machine learning approaches that can be employed to improve AMP activity to combat global antimicrobial resistance.

Antimicrobial peptides towards clinical application: Delivery and formulation

Antimicrobial peptides hold promise to supplement small molecules antibiotics and combat the multidrug resistant microbes. There are however technical hurdles towards the clinical applications, largely due to the inherent limitations of peptides including stability, cytotoxicity and bioavailability. Here we review recent studies concerning the delivery and formulation of antimicrobial peptides, by categorizing the different strategies as driven by physical interactions or chemical conjugation reactions, and carriers ranging from inorganic based ones (including gold, silver and silica based solid nanoparticles) to organic ones (including micelle, liposome and hydrogel) are covered. Besides, targeted delivery of antimicrobial peptides or using antimicrobial peptides as the targeting moiety, and responsive release of the peptides after delivery are also reviewed. Lastly, strategies towards the increase of oral bioavailability, from both physical or chemical methods, are highlighted. Altogether, this article provides a comprehensive review of the recent progress of the delivery and formulation of antimicrobial peptides towards clinical application.

Lipidation of Temporin-1CEb Derivatives as a Tool for Activity Improvement, Pros and Cons of the Approach

The alarming raise of multi-drug resistance among human microbial pathogens makes the development of novel therapeutics a priority task. In contrast to conventional antibiotics, antimicrobial peptides (AMPs), besides evoking a broad spectrum of activity against microorganisms, could offer additional benefits, such as the ability to neutralize toxins, modulate inflammatory response, eradicate bacterial and fungal biofilms or prevent their development. The latter properties are of special interest, as most antibiotics available on the market have limited ability to diffuse through rigid structures of biofilms. Lipidation of AMPs is considered as an effective approach for enhancement of their antimicrobial potential and in vivo stability; however, it could also have undesired impact on selectivity, solubility or the aggregation state of the modified peptides. In the present work, we describe the results of structural modifications of compounds designed based on cationic antimicrobial peptides DK5 and CAR-PEG-DK5, derivatized at their N-terminal part with fatty acids with different lengths of carbon chain. The proposed modifications substantially improved antimicrobial properties of the final compounds and their effectiveness in inhibition of biofilm development as well as eradication of pre-formed 24 h old biofilms of Candida albicans and Staphylococcus aureus. The most active compounds (C5-DK5, C12-DK5 and C12-CAR-PEG-DK5) were also potent against multi-drug resistant Staphylococcus aureus USA300 strain and clinical isolates of Pseudomonas aeruginosa. Both experimental and in silico methods revealed strong correlation between the length of fatty acid attached to the peptides and their final membranolytic properties, tendency to self-assemble and cytotoxicity.

Prediction and Activity of a Cationic α-Helix Antimicrobial Peptide ZM-804 from Maize

Antimicrobial peptides (AMPs) are small molecules consisting of less than fifty residues of amino acids. Plant AMPs establish the first barrier of defense in the innate immune system in response to invading pathogens. The purpose of this study was to isolate new AMPs from the Zea mays L. inbred line B73 and investigate their antimicrobial activities and mechanisms against certain essential plant pathogenic bacteria. In silico, the Collection of Anti-Microbial Peptides (CAMP_R3), a computational AMP prediction server, was used to screen a cDNA library for AMPs. A ZM-804 peptide, isolated from the Z. mays L. inbred line B73 cDNA library, was predicted as a new cationic AMP with high prediction values. ZM-804 was tested against eleven pathogens of Gram-negative and Gram-positive bacteria and exhibited high antimicrobial activities as determined by the minimal inhibitory concentrations (MICs) and the minimum bactericidal concentrations (MBCs). A confocal laser scanning microscope observation showed that the ZM-804 AMP targets bacterial cell membranes. SEM and TEM images revealed the disruption and damage of the cell membrane morphology of Clavibacter michiganensis subsp. michiganensis and Pseudomonas syringae pv. tomato (Pst) DC3000 caused by ZM-804. In planta, ZM-804 demonstrated antimicrobial activity and prevented the infection of tomato plants by Pst DC3000. Moreover, four virulent phytopathogenic bacteria were prevented from inducing hypersensitive response (HR) in tobacco leaves in response to low ZM-804 concentrations. ZM-804 exhibits low hemolytic activity against mouse red blood cells (RBCs) and is relatively safe for mammalian cells. In conclusion, the ZM-804 peptide has a strong antibacterial activity and provides an alternative tool for plant disease control. Additionally, the ZM-804 peptide is considered a promising candidate for human and animal drug development.

Fatty Acid Conjugation Leads to Length-Dependent Antimicrobial Activity of a Synthetic Antibacterial Peptide (Pep19-4LF)

The increasing number of infections caused by multidrug-resistant bacteria requires an intensified search for new antibiotics. Pep19-4LF is a synthetic antimicrobial peptide (GKKYRRFRWKFKGKLFLFG) that was previously designed with the main focus on high antimicrobial activity. The hydrophobic motif, LFLFG, was found to be essential for antimicrobial activity. However, this motif shows several limitations such as aggregation in biological media, low solubility, and small yields in peptide synthesis. In order to obtain more appropriate peptide characteristics, the hydrophobic motif was replaced with fatty acids. For this purpose, a shortened variant of Pep19-4LF (Pep19-short; GKKYRRFRWKFKGK) was synthesized and covalently linked to saturated fatty acids of different chain lengths. The peptide conjugates were tested with respect to their antibacterial activity by microdilution experiments on different bacterial strains. The length of the fatty acid was found to be directly correlated to the antimicrobial activity up to an ideal chain length (undecanoic acid, C11:0). This conjugate showed high antimicrobial activity in absence of toxicity. Time–kill studies revealed a fast and bactericidal mode of action. Furthermore, the first in vivo experiments of the conjugate in rodents demonstrated pharmacokinetics appropriate for application as a drug. These results clearly indicate that the hydrophobic motif of the peptide can be replaced by a single fatty acid of medium length, simplifying the design of this antimicrobial peptide while retaining high antimicrobial activity in the absence of toxicity.

Preparation, Characterization and Pharmacokinetic Study of N-Terminal PEGylated D-Form Antimicrobial Peptide OM19r-8

Recently, new cationic antibacterial peptide OM19R has been designed with low minimum inhibitory concentration (MIC) values against some gram-negative bacteria, such as Escherichia coli, Salmonella, and Shigella. However, this hybrid peptide, like most antibacterial peptides, has low enzyme stability and short half-life, which, in turn, increases the drug's cost. In this study, an antibacterial peptide (OM19r-8) was obtained containing some D-Arg amino acids. The new preparations were carried out through the replacement of l-Arginine by d-Arginine and the addition of PEG chains. Firstly, eight OM19r series of antibacterial peptides were obtained by designing D-Arg. Then, a polyethylene glycol-modified product mPEG₅-butyrALD-OM19r-8 (mPEG₅-OM19r-8) was isolated and purified by reverse-phase high-performance liquid chromatography (RT-HPLC). The enzyme stability test showed that the resistance of antibacterial peptide OM19r-8 to protease degradation increased by 4-32-fold. Moreover, the Time-kill studies showed that the germicidal kinetics curves of mPEG₅-OM19r-8 and OM19r-8 to Escherichia coli had a similar trend, thus suggesting that PEG modification has an acceptable effect on the activity of the original peptide. Furthermore, the elimination of half-life (28.09 ± 2.81min) of mPEG₅-OM19r-8, and the area under the drug concentration-time curve (2686.48 ± 651.36min∗ug/ml) was significantly prolonged. The current study demonstrates an example that optimizes the AMP by utilizing L-to-D amino acid replacement and including PEG chains. These results provide useful data for the clinical application of the mPEG₅-OM19r-8.

Effect of N-methylated and fatty acid conjugation on analogs of antimicrobial peptide Anoplin

With the increment of drug-resistant bacteria and the slow development of novel antibiotics, antimicrobial peptides have gained increasing attention as a potential antibiotic alternative. They not only displayed a broad-spectrum antimicrobial activity but also were difficult to induce resistance development because of their unique membrane-lytic activity. Herein, to improve the limitations of Anoplin, the N-methyl amino acids were first used to replace the amino acids of Anoplin at sensitive enzymatic cleave sites (Leu, Ile, Lys and Arg). Afterward, the N-methylated analogs M3.6/M4.7/M5.7 with high stability were screened out and further modified by N-terminal fatty acid conjugation to develop new antimicrobial peptide analogs with both potent antimicrobial activity and high proteolytic stability, and 12 new Anoplin analogs Cn-M3.6/M4.7/M5.7 (n = 8,10,12,14) were designed and synthesized. Our results showed that compared with native Anoplin, the stability of these N-methylated lipopeptides against trypsin and chymotrypsin degradation were increased by 10⁴-10⁶ times. Besides, they still possessed potent antimicrobial activity under physiological salts and serum environment. Among them, the new designed analogs C12-M3.6/M4.7/M5.7 showed the optimal antimicrobial activity, synergy and additive effects were also observed when they were combined with traditional antibiotics polymyxin B, rifampin, and kanamycin. Moreover, they could effectively inhibit the formation of biofilms by P. aeruginosa and S. aureus. The antimicrobial mechanism studied revealed that these N-methylated lipopeptides could display a rapid bactericidal effect by destroying the bacterial cell membrane. Notably, no detectable resistance of these new designed peptides was developed after continuous cultured with E. coli for 20 passages. In summary, we have designed a new class of antimicrobial peptide analogs with potent antimicrobial activity and high proteolytic stability through N-methyl amino acids substitution and N-terminal fatty acid conjugation. This study also provides new ideas and methods for the modification of antimicrobial peptides in the future.

Vancomycin-Lipopeptide Conjugates with High Antimicrobial Activity on Vancomycin-Resistant Enterococci

Multidrug-resistant bacteria represent one of the most important health care problems worldwide. While there are numerous drugs available for standard therapy, there are only a few compounds capable of serving as a last resort for severe infections. Therefore, approaches to control multidrug-resistant bacteria must be implemented. Here, a strategy of reactivating the established glycopeptide antibiotic vancomycin by structural modification with polycationic peptides and subsequent fatty acid conjugation to overcome the resistance of multidrug-resistant bacteria was followed. This study especially focuses on the structure-activity relationship, depending on the modification site and fatty acid chain length. The synthesized conjugates showed high antimicrobial potential on vancomycin-resistant enterococci. We were able to demonstrate that the antimicrobial activity of the vancomycin-lipopeptide conjugates depends on the chain length of the attached fatty acid. All conjugates showed good cytocompatibility in vitro and in vivo. Radiolabeling enabled the in vivo determination of pharmacokinetics in Wistar rats by molecular imaging and biodistribution studies. An improved biodistribution profile in comparison to unmodified vancomycin was observed. While vancomycin is rapidly excreted by the kidneys, the most potent conjugate shows a hepatobiliary excretion profile. In conclusion, these results demonstrate the potential of the structural modification of already established antibiotics to provide highly active compounds for tackling multidrug-resistant bacteria.

Effects of the antifungal peptide Skh-AMP1 derived from Satureja khuzistanica on cell membrane permeability, ROS production, and cell morphology of conidia and hyphae of Aspergillus fumigatus

Skh-AMP1 (GRTSKQELCTWERGSVRQADKTIAG) is an antifungal peptide isolated from Satureja khuzistanica which has been shown to have strong antifungal activity against Aspergillus and Candida species, but no obvious hemolytic effects or cell cytotoxicity in vitro. In the present study, Skh-AMP1 was synthesized, and its mode of action on the plasma membrane, mitochondria, and morphological and ultrastructural changes against conidia and hyphae of Aspergillus fumigatus were evaluated. The results indicated that Skh-AMP1 had sporicidal activities against the non-germinated conidia of A. fumigatus at concentrations of 40 and 80 μM. Skh-AMP1 induced the release of K⁺ and the uptake of propidium iodide and enhanced reactive oxygen species (ROS) production in the conidia and hyphae of the fungus. Scanning and transmission electron microscopy showed deformation and shrinkage of the hyphae and conidia, cell membrane disruption and detachment from the cell wall, microvesicle formation, vacuolation and depletion of cytoplasm and organelles of the hyphae of A. fumigatus exposed to 40-80 μM of the peptide. The results further demonstrated that the antifungal activity of Skh-AMP1 may be related to its ability to disrupt fungal cell membrane permeabilization and induce enhanced ROS production. Therefore, Skh-AMP1 can be introduced as a novel antifungal candidate for developing new therapeutic agents.

Performance evaluation of antimicrobial peptide ll-37 and hepcidin and β-defensin-2 secreted by mesenchymal stem cells

Peptides are secreted by different cell types and are trendy therapeutic agents that have attracted attention for the treatment of several diseases such as infections. Antimicrobial peptides exert various mechanisms such as changing cell membrane permeability which leads to inhibition or death of bacterial cells. mesenchymal stem cells (MSCs) are key to produce antimicrobial peptides and to inhibit the growth of pathogens. These cells have been shown to be capable of producing antimicrobial peptides upon exposure to different bacteria. As a result, antimicrobial peptides can be considered as novel agents for the treatment of infectious diseases. The purpose of this review was to investigate the targets and mechanisms of antimicrobial peptides secreted by MSCs.

Replacement of l-Amino Acids by d-Amino Acids in the Antimicrobial Peptide Ranalexin and Its Consequences for Antimicrobial Activity and Biodistribution

Infections caused by multidrug-resistant bacteria are a global emerging problem. New antibiotics that rely on innovative modes of action are urgently needed. Ranalexin is a potent antimicrobial peptide (AMP) produced in the skin of the American bullfrog Rana catesbeiana. Despite strong antimicrobial activity against Gram-positive bacteria, ranalexin shows disadvantages such as poor pharmacokinetics. To tackle these problems, a ranalexin derivative consisting exclusively of d-amino acids (named danalexin) was synthesized and compared to the original ranalexin for its antimicrobial potential and its biodistribution properties in a rat model. Danalexin showed improved biodistribution with an extended retention in the organisms of Wistar rats when compared to ranalexin. While ranalexin is rapidly cleared from the body, danalexin is retained primarily in the kidneys. Remarkably, both peptides showed strong antimicrobial activity against Gram-positive bacteria and Gram-negative bacteria of the genus Acinetobacter with minimum inhibitory concentrations (MICs) between 4 and 16 mg/L (1.9–7.6 µM). Moreover, both peptides showed lower antimicrobial activities with MICs ≥32 mg/L (≥15.2 µM) against further Gram-negative bacteria. The preservation of antimicrobial activity proves that the configuration of the amino acids does not affect the anticipated mechanism of action, namely pore formation.

Antimicrobial peptides: Promising alternatives in the post feeding antibiotic era

Antimicrobial peptides (AMPs), critical components of the innate immune system, are widely distributed throughout the animal and plant kingdoms. They can protect against a broad array of infection-causing agents, such as bacteria, fungi, parasites, viruses, and tumor cells, and also exhibit immunomodulatory activity. AMPs exert antimicrobial activities primarily through mechanisms involving membrane disruption, so they have a lower likelihood of inducing drug resistance. Extensive studies on the structure-activity relationship have revealed that net charge, hydrophobicity, and amphipathicity are the most important physicochemical and structural determinants endowing AMPs with antimicrobial potency and cell selectivity. This review summarizes the recent advances in AMPs development with respect to characteristics, structure-activity relationships, functions, antimicrobial mechanisms, expression regulation, and applications in food, medicine, and animals.

Strengthening peptide-based drug activity with novel glyconanoparticle

The therapeutic application of peptide-based drugs is significantly limited by the rapid proteolytic degradation that occurs when in blood. Encapsulation of these peptide structures within a delivery system, such as liposomes, can greatly improve both stability and target delivery. As part of our work focused on novel ambiphilic mannosylated neoglycolipids as targeted drug delivery systems, we have developed a C14-alkyl-mannopyranoside that forms self-assembled monodisperse liposomes. Herein, these glycoliposomes are investigated as a potential method to improve the plasma stability of peptide-based drugs. Reversed phase high-performance liquid chromatography (RP-HPLC) and mass spectrometry (MS) methods were developed to assess the in vitro plasma stability of two structurally diverse peptides, including the kappa opioid receptor selective antagonist dynantin, and the NOD2 innate immune receptor ligand muramyl dipeptide (MDP). The RP-HPLC methods developed were able to resolve the peptides from background plasma contaminants and provided suitable response levels and linearity over an appropriate concentration range. Both compounds were found to be significantly degraded in rat plasma. Increasing degrees of both entrapment and stabilization were noted when dynantin was combined with the C14-alkyl-mannopyranoside in increasing peptide:glycoside ratios. The combination of MDP with the glycolipid also led to peptide entrapment, which greatly improved the plasma stability of the peptide. Overall, the results clearly indicate that the stability of peptide-based structures, which are subject to degradation in plasma, can be greatly improved via entrapment within C14-alkyl-mannopyranoside-bearing glycoliposomes.

Dependence on size and shape of non-nature amino acids in the enhancement of lipopolysaccharide (LPS) neutralizing activities of antimicrobial peptides

HYPOTHESIS

Release of lipopolysaccharides (LPS) from bacteria into bloodstream may cause serious unwanted stimulation of the host immune system. P-113 is a clinically active histidine-rich antimicrobial peptide. Nal-P-113, a β-naphthylalanine-substituted P-113, is salt-resistant but has limited LPS neutralizing activity. We suspected the size and shape of the non-natural bulky amino acid may affect its LPS neutralizing activity. Herein, antimicrobial, LPS neutralizing, and antiproteolytic effects of phenylalanine- (Phe-P-113), β-naphthylalanine- (Nal-P-113), β-diphenylalanine- (Dip-P-113), and β-(4,4'-biphenyl)alanine- (Bip-P-113) substituted P-113 were studied.

EXPERIMENTS

Structure-activity relationships of P-113, Phe-P-113, Nal-P-113, Dip-P-113, and Bip-P-113 were evaluated using antimicrobial activity assays, serum proteolytic assays, peptide-induced permeabilization of large unilamellar vesicles, zeta potential measurements, dynamic light scattering measurement of LPS aggregation, and Limulus amebocyte lysate assays for measuring LPS neutralization. In vitro and in vivo LPS neutralizing activities were further confirmed by LPS-induced inflammation inhibition in an endotoxemia mouse model.

FINDINGS

Bip-P-113 and Dip-P-113 had the longest and widest non-nature amino acids, respectively. Bip-P-113 enhanced salt resistance, serum proteolytic stability, peptide-induced permeabilization, zeta potential measurements, LPS aggregation, and in vitro and in vivo LPS neutralizing activities. These results could help design novel antimicrobial peptides that have enhanced stability in vivo and that can have potential therapeutic applications.