Inhibitory effects of ionic liquids on the lactic dehydrogenase activity

Simultaneous saccharification of hemicellulose and cellulose of corncob in a one-pot system using catalysis of carbon based solid acid from lignosulfonate

The drive towards sustainable chemistry has inspired the development of active solid acids as catalysts and ionic liquids as solvents for an efficient release of sugars from lignocellulosic biomass for future biorefinery practices. Carbon-based solid acid (SI-C-S-H2O2) prepared from sodium lignosulfonate, a waste of the paper industry, was used with water or ionic liquid to hydrolyze corncob in this study. The effects of various reaction parameters were investigated in different solvent systems. The highest xylose yield of 83.4% and hemicellulose removal rate of 90.6% were obtained in an aqueous system at 130 °C for 14 h. After the pretreatment, cellulase was used for the hydrolysis of residue and the enzymatic digestibility of 92.6% was obtained. Following these two hydrolysis steps in the aqueous systems, the highest yield of total reducing sugar (TRS) was obtained at 88.1%. Further, one-step depolymerization and saccharification of corncob hemicellulose and cellulose to reducing sugars in an IL-water system catalyzed by SI-C-S-H2O2 was conducted at 130 °C for 10 h, with a high TRS yield of 75.1% obtained directly. After recycling five times, the solid acid catalyst still showed a high catalytic activity for sugar yield in different systems, providing a green and effective method for lignocellulose degradation.

A KNIME Workflow to Assist the Analogue Identification for Read-Across, Applied to Aromatase Activity

The reduction and replacement of in vivo tests have become crucial in terms of resources and animal benefits. The read-across approach reduces the number of substances to be tested, exploiting existing experimental data to predict the properties of untested substances. Currently, several tools have been developed to perform read-across, but other approaches, such as computational workflows, can offer a more flexible and less prescriptive approach. In this paper, we are introducing a workflow to support analogue identification for read-across. The implementation of the workflow was performed using a database of azole chemicals with in vitro toxicity data for human aromatase enzymes. The workflow identified analogues based on three similarities: structural similarity (StrS), metabolic similarity (MtS), and mechanistic similarity (McS). Our results showed how multiple similarity metrics can be combined within a read-across assessment. The use of the similarity based on metabolism and toxicological mechanism improved the predictions in particular for sensitivity. Beyond the results predicting a large population of substances, practical examples illustrate the advantages of the proposed approach.

Toxicity of ionic liquids in marine and freshwater microorganisms and invertebrates: state of the art

The variety of applications and expected growth in ionic liquid production are raising concerns about the release of these compounds into aquatic systems. Up to date, 103 studies have provided ecotoxicological data regarding the exposure effects of Ionic Liquids towards aquatic microorganisms and invertebrate species: 61 were devoted to freshwater species (n = 28), while marine species (n = 12) were mentioned in 42. The aim of this review, by gathering published studies on ionic liquids and model aquatic organisms, was to present the toxic effects described in distinct species and to understand which are the main factors influencing the toxicity of some ionic liquids. In accordance with the most recognized pattern, freshwater species were featured in a higher number of publications than marine ones. After literature analysis, algal species were the most represented organisms in aquatic toxicity assessments. Among tested compounds, the imidazolium cations in combination with long alkyl-chain anions, showed to be the most toxic one. In analytical terms, it is not straightforward to find the undissociated compound in a natural compartment, as ionic liquids are composed of ionic components, easily subjected to dissociation. Given the aforementioned, the present review paper points out the need of increasing the number of organisms being assessed in ionic liquids toxicity assays, in order to start defining monitoring procedures. Moreover, such would allow a better understanding of ionic liquids contamination status and, also, the opportunity to remark the effectiveness of new in silico methods for the ecotoxicity assessment of this kind of substances.

Exploration of structural requirements for azole chemicals towards human aromatase CYP19A1 activity: Classification modeling, structure-activity relationships and read-across study

Human aromatase, also called CYP19A1, plays a major role in the conversion of androgens into estrogens. Inhibition of aromatase is an important target for estrogen receptor (ER)-responsive breast cancer therapy. Use of azole compounds as aromatase inhibitors is widespread despite their low selectivity. A toxicological evaluation of commonly used azole-based drugs and agrochemicals with respect to CYP19A1is currently requested by the European Union- Registration, Evaluation, Authorization and Restriction of Chemicals (EU-REACH) regulations due to their potential as endocrine disruptors. In this connection, identification of structural alerts (SAs) is an effective strategy for the toxicological assessment and safe drug design. The present study describes the identification of SAs of azole-based chemicals as guiding experts to predict the aromatase activity. Total 21 SAs associated with aromatase activity were extracted from dataset of 326 azole-based drugs/chemicals obtained from Tox21 library. A cross-validated classification model having high accuracy (error rate 5%) was proposed which can precisely classify azole chemicals into active/inactive toward aromatase. In addition, mechanistic details and toxicological properties (agonism/antagonism) of azoles with respect to aromatase were explored by comparing active and inactive chemicals using structure-activity relationships (SAR). Lastly, few structural alerts were applied to form chemical categories for read-across applications.

Emerging impacts of ionic liquids on eco-environmental safety and human health

Owing to their unique physicochemical properties, ionic liquids (ILs) have been rapidly applied in diverse areas, such as organic synthesis, electrochemistry, analytical chemistry, functional materials, pharmaceutics, and biomedicine. The increase in the production and application of ILs has resulted in their release into aquatic and terrestrial environments. Because of their low vapor pressure, ILs cause very little pollution in the atmosphere compared to organic solvents. However, ILs are highly persistent in aquatic and terrestrial environments due to their stability, and therefore, potentially threaten the safety of eco-environments and human health. Specifically, the environmental translocation and retention of ILs, or their accumulation in organisms, are all related to their physiochemical properties, such as hydrophobicity. Based on results of ecotoxicity, cytotoxicity, and toxicity in mammalian models, the mechanisms involved in IL-induced toxicity include damage of cell membranes and induction of oxidative stress. Recently, artificial intelligence and machine learning techniques have been used in mining and modeling toxicity data to make meaningful predictions. Major future challenges are also discussed. This review will accelerate our understanding of the safety issues of ILs and serve as a guideline for the design of the next generation of ILs.

Review of the toxic effects of ionic liquids

Interest in ionic liquids (ILs), called green or designer solvents, has been increasing because of their excellent properties such as thermal stability and low vapor pressure; thus, they can replace harmful organic chemicals and help several industrial fields e.g., energy-storage materials production and biomaterial pretreatment. However, the claim that ILs are green solvents should be carefully considered from an environmental perspective. ILs, given their minimal vapor pressure, may not directly cause atmospheric pollution. However, they have the potential to cause adverse effects if leaked into the environment, for instance if they are spilled due to human mistakes or technical errors. To estimate the risks of ILs, numerous ILs have had their toxicity assessed toward several micro- and macro-organisms over the past few decades. Since the toxic effects of ILs depend on the method of estimating toxicity, it is necessary to briefly summarize and comprehensively discuss the biological effects of ILs according to their structure and toxicity testing levels. This can help simplify our understanding of the toxicity of ILs. Therefore, in this review, we discuss the key findings of toxicological information of ILs, collect some toxicity data of ILs to different species, and explain the influence of IL structure on their toxic properties. In the discussion, we estimated two different sensitivity values of toxicity testing levels depending on the experiment condition, which are theoretical magnitudes of the inherent sensitivity of toxicity testing levels in various conditions and their changes in biological response according to the change in IL structure. Finally, some perspectives, future research directions, and limitations to toxicological research of ILs, presented so far, are discussed.

Evaluating the hazardous impact of ionic liquids - Challenges and opportunities

Ionic liquids (ILs), being related to the design of new environmentally friendly solvents, are widely considered for applications within the "green chemistry" concept. Due to their unique properties and wide diversity, ILs allow tailoring new separation procedures and producing new materials for advanced applications. However, despite the promising technical performance, environmental concerns highlighted in recent studies focused on the toxicity and biodegradability of ILs and their metabolites have revealed that ILs safety labels are not as benign as previously claimed. This review refers to the fundamentals about the properties and applications of ILs also in the context of their potential environmental effect. Toxicological issues and harmful effects related to the use of ILs are discussed, including the evaluation of their biodegradability and ecological impact on diverse organisms and ecosystems, also with respect to bacteria, fungi, and cell cultures. In addition, this review covers the tools used to assess the toxicity of ILs, including the predictive computational models and the results of studies involving cell membrane models and molecular simulations. Summing up the knowledge available so far, there are still no reliable criteria for unequivocal attribution of toxicity and environmental impact credentials for ILs, which is a challenging research task.

Ionic Liquids-A Review of Their Toxicity to Living Organisms

Ionic liquids (ILs) were initially hailed as a green alternative to traditional solvents because of their almost non-existent vapor pressure as ecological replacement of most common volatile solvents in industrial processes for their damaging effects on the environment. It is common knowledge that they are not as green as desired, and more thought must be put into the biological consequences of their industrial use. Still, compared to the amount of research studying their physicochemical properties and potential applications in different areas, there is a scarcity of scientific papers regarding how these substances interact with different organisms. The intent of this review was to compile the information published in this area since 2015 to allow the reader to better understand how, for example, bacteria, plants, fish, etc., react to the presence of this family of liquids. In general, lipophilicity is one of the main drivers of toxicity and thus the type of cation. The anion tends to play a minor (but not negligible) role, but more research is needed since, owing to the very nature of ILs, except for the most common ones (imidazolium and ammonium-based), many of them are subject to only one or two articles.

Conformational Change and Activity Enhancement of Rabbit Muscle Lactate Dehydrogenase Induced by Polyethyleneimine

For a better understanding on the interaction between polyethyleneimine (PEI) and proteins, spectroscopic studies including UV-vis absorption, resonance Rayleigh scattering, fluorescence, and circular dichroism were conducted to reveal the conformational change of rabbit muscle lactate dehydrogenase (rmLDH) and related to the bioactivity of the enzyme. Regardless of the electrostatic repulsion, PEI could bind on the surface of rmLDH, a basic protein, via hydrogen binding of the dense amine groups and hydrophobic interaction of methyl groups. The competitive binding by PEI led to a reduction of the binding efficiency of rmLDH toward β-nicotinamide adenine dinucleotide, the coenzyme, and sodium pyruvate, the substrate. However, the complex formation with PEI induced a less ordered conformation and an enhanced surface hydrophobicity of rmLDH, facilitating the turnover of the enzyme and generally resulting in an increased activity. PEI of higher molecular weight was more efficient to induce alteration in the conformation and catalytic activity of the enzyme.

Structure-Activity Relationship Modeling and Experimental Validation of the Imidazolium and Pyridinium Based Ionic Liquids as Potential Antibacterials of MDR Acinetobacter Baumannii and Staphylococcus Aureus

Online Chemical Modeling Environment (OCHEM) was used for QSAR analysis of a set of ionic liquids (ILs) tested against multi-drug resistant (MDR) clinical isolate Acinetobacter baumannii and Staphylococcus aureus strains. The predictive accuracy of regression models has coefficient of determination q² = 0.66 - 0.79 with cross-validation and independent test sets. The models were used to screen a virtual chemical library of ILs, which was designed with targeted activity against MDR Acinetobacter baumannii and Staphylococcus aureus strains. Seven most promising ILs were selected, synthesized, and tested. Three ILs showed high activity against both these MDR clinical isolates.

Evaluation of Ionic Liquids and Ionic Liquids Active Pharmaceutical Ingredients Inhibition in Elastase Enzyme Activity

Human neutrophil elastase (HNE) is used as diagnostic biomarker for inflammation/infection. In this work, 10 ionic liquids (ILs) and 11 ionic liquids active pharmaceutical ingredients (ILs-APIs) were tested to evaluate the inhibition effect on the activity of porcine pancreatic elastase enzyme, frequently employed as a model for HNE. The insertion of ionic liquids in some drugs is useful, as the insertion of ILs with inhibitory capacity will also slow down all processes in which this enzyme is involved. Therefore, a spectrophotometric method was performed to the determination of EC₅₀ values of the compounds tested. EC₅₀ values of 124 ± 4 mM to 289 ± 11 mM were obtained, with the most toxic IL for elastase being tetrabutylammonium acetate and the least toxic 1-butyl-3-methylimidazolium acetate. Moreover, sodium salicylate (raw material) presented the lower and benzethonium bistriflimide the higher EC₅₀ when compared with all the IL-APIs tested. This work provides significant information about the effect of the studied IL and IL-APIs in elastase enzyme activity.

Biocatalytic action of proteases in ionic liquids: Improvements on their enzymatic activity, thermal stability and kinetic parameters

This study evaluated the effect of the addition of the following ionic liquids (IL): choline chloride (CC), tetramethylammonium bromide (TB) and 1‑ethyl‑3‑methylimidazolium bromide (EM), on some biochemical properties including enzymatic activity and different kinetic parameters of commercial proteases. The enzyme-IL combinations that showed the highest increases in enzyme activities were as follows: CC (0.5mM) and Neutrase® 0.8L; CC (5mM) and Flavourzyme® 500L; TB (2000mM) and Alcalase® 2.4L, with relative increases of 20, 15 and 150% in protease activities, respectively, compared to the control assays. The combination TB and Alcalase® 2.4L showed a reduction of 50% of the activation energy (E_a), an increase of the relation V_max/K_m of 35% and a 16-fold rise in the values of t_1/2, and D. Neutrase® 0.8L combined with CC showed an increase of 20% in the relation V_max/K_m. The combination Flavourzyme® 500L and CC presented a 20% higher value of the relation V_max/K_m and a 2-fold increase in the values of t_1/2 and D compared to the control assay. In summary, the most positive effects observed in this study included proteases with improved activity and stability properties and a greater affinity for the substrate.

Cytoprotective effect of deferiprone against aluminum chloride-induced oxidative stress and apoptosis in lymphocytes

Aluminum (Al) is a toxic metal, and excessive Al accumulation causes immunosuppression. Deferiprone (DFP) is a well-known chelator and used in dialysis patients for removing Al from tissues. The present study aimed to investigate whether DFP treatment can attenuate immunotoxicity induced by aluminum chloride (AlCl3) in cultured lymphocytes. Lymphocytes were treated with 0 and 0.6 mmol/L AlCl3∙6H2O (pH 7.2) and/or 1.8 mmol/L DFP, respectively. Immune function of lymphocytes was assessed by T and B lymphocytes proliferation rates, T lymphocyte subpopulations and IL-2, IL-6 and TNF-α contents. In addition, lymphocyte damage was assessed by LDH activity, NO and MDA contents, NOS, SOD and GSH-Px activities, lymphocyte apoptosis index. These results showed that AlCl3 exposure reduced T and B lymphocyte proliferation rates, CD3+ and CD4+ T lymphocyte subpopulations, CD4+/CD8+ ratio, IL-2, IL-6 and TNF-α contents, SOD and GSH-Px activities, early and later lymphocyte apoptosis indexes while enhanced CD8+ T lymphocyte subpopulation, NO and MDA contents, LDH activity. DFP treatment attenuated the immunotoxicity of lymphocytes and reduced oxidative stress and lymphocyte apoptosis induced by AlCl3, indicating that DFP could protect lymphocytes against immunosuppression induced by AlCl3 through attenuating oxidative stress and apoptosis.

Toxicity mechanisms of ionic liquids

Over the past three decades a growing awareness of environmental protection prompted the development of so-called green and sustainable technologies. Therefore, academic and wider community intensively explores new chemicals and safer, more energy efficient processes based on a rational compromise between economic, social, and environmental requirements. Due to low volatility and stability, ionic liquids emerged as a potential replacement for traditional volatile and harmful organic solvents. Various studies have been carried out to validate the green character of ionic liquids, whereby data published suggest that these compounds, due to their relatively high toxicity and poor biodegradability, could have an extremely negative impact on the environment. This paper presents the current knowledge on the toxicity of ionic liquids, with a special emphasis on the mechanisms by which this group of compounds causes changes in the morphology and physiology of organisms at different organisational levels of the ecosystem.

Environmental Impact of Ionic Liquids: Recent Advances in (Eco)toxicology and (Bio)degradability

This Review aims to integrate the most recent and pertinent data available on the (bio)degradability and toxicity of ionic liquids for global and critical analysis and on the conscious use of these compounds on a large scale thereafter. The integrated data will enable focus on the recognition of toxicophores and on the way the community has been dealing with them, with the aim to obtain greener and safer ionic liquids. Also, an update of the most recent biotic and abiotic methods developed to overcome some of these challenging issues will be presented. The review structure aims to present a potential sequence of events that can occur upon discharging ionic liquids into the environment and the potential long-term consequences.

Assessment of ionic liquids' toxicity through the inhibition of acylase I activity on a microflow system

Acylase I (ACY I) plays a role in the detoxication and bioactivation of xenobiotics as well in other physiological functions. In this context, an automated ACY I assay for the evaluation of ionic liquids' (ILs) toxicity was developed. The assay was implemented in a sequential injection analysis (SIA) system and was applied to eight commercially available ILs. The SIA methodology was based on the deacetylation of N-acetyl-l-methionine with production of l-methionine, which was determined using fluorescamine. ACY I inhibition in the presence of ILs was monitored by the decrease of fluorescence intensity. The obtained results confirmed the influence of ILs' structural elements on its toxicity and revealed that pyridinium and phosphonium cations, longer alkyl side chains and tetrafluoroborate anion displayed higher toxic effect on enzyme activity. The developed methodology proved to be robust and exhibited good repeatability (RSD < 1.3%, n = 10), leading also to a reduction of reagents consumption and effluents production. Thus, it is expected that the proposed assay can be used as a novel tool for ILs' toxicity screening.