Process optimization, purification and characterization of a novel acidic, thermostable chitinase from Humicola grisea

Response surface optimization, purification, characterization and short-chain chitooligosaccharides production from an acidic, thermostable chitinase from Thermomyces dupontii

Chitin, recovered in huge amounts from coastal waste, may biocatalytically valorized for utilization in food and biotech sectors. Conventional chemical-based conversion makes use of significant volumes of hazardous acid and alkali. Alternatively, enzymes offer better process control and generation of homogeneous products. Process variables were derived to achieve augmented levels of chitinase (3.8809 Ul-1 h-1) productivity from a novel thermophilic fungal strain Thermomyces dupontii, ITCC 9104 following incubation (96 h, 45 °C). An acidic thermostable chitinase TdChiT having molecular mass of 60 kDa has been purified. Optimal TdChiT activity has been demonstrated at 70 °C and pH 5. Notably decreased activity over a broad range of temperature and pH was observed following deglycosylation. Half-life, activation energy, Gibbs free energy, enthalpy and entropy for denaturation of TdChiT at its optimum temperature were 197.40 min, 105.48 kJ mol-1, 100.59 kJ mol-1, 102.64 kJ mol-1 and 5.95 J mol-1 K-1. TdChiT has specificity towards colloidal chitin and (GlcNAc)2-4. Metal ions viz. Mn2+, Ca2+ and Co2+ and nonionic surfactants notably enhanced chitinase activity. Thin layer chromatography analysis has revealed effective hydrolysis of colloidal chitin and (GlcNAc)2-4. TdChiT may potentially be employed for design of better, eco-friendly and less resource-intensive industrial procedures for upcycling of crustacean waste into value-added organonitrogens.

Chitinase from Streptomyces mutabilis as an Effective Eco-friendly Biocontrol Agent

Blood sucking parasites not only cause economic loss but also transmit numerous diseases. Dermanyssus gallinae, an obligatory blood feeding ectoparasite causes huge production loss to the poultry industry. Mosquitoes act as vector for transmitting several viral and parasitic diseases in humans. Acaricide resistance limits the control of these parasites. The present study was aimed to control the parasites using chitinase that have selective degradation of chitin, an important component in exoskeleton development. Chitinase was induced in Streptomyces mutabilis IMA8 with chitin extracted from Charybdis smithii. The enzyme showed more than 50% activity at 30-50 °C and the optimum activity at 45 °C. The enzyme activity of chitinase was highest at pH 7.0. The kinetic parameters Km and Vmax values of chitinase were determined by non-linear regression using Michaelis-Menten equation and its derivative Hanes-Wolf plot. The larvicidal effect of different concentrations of chitinase was evaluated against all instar larvae (I-IV) and pupae of An. stephensi and Ae. aegypti after 24 h of exposure. The percentage of mortality was directly proportional to the chitinase concentration. Bioassay for miticidal activity showed that chitinase had excellent miticidal activity (LC50 = 24.2 ppm) against D. gallinae. The present study suggested the usage of Streptomyces mutabilis for preparation of chitinase in mosquito and mite control.

An overview of fungal chitinases and their potential applications

Chitin, the world's second most abundant biopolymer after cellulose, is composed of β-1,4-N-acetylglucosamine (GlcNAc) residues. It is the key structural component of many organisms, including crustaceans, mollusks, marine invertebrates, algae, fungi, insects, and nematodes. There has been a significant increase in the generation of chitinous waste from seafood businesses, resulting in a big amount of scrap. Although several organisms, such as plants, crustaceans, insects, nematodes, and animals, produce chitinases, microorganisms are promising candidates and a sustainable option that mediates chitin degradation. Fungi are the dominant group of chitinase producers among microorganisms. In fungi, chitinases are involved in morphogenesis, cell division, autolysis, chitin acquisition for nutritional purposes, and mycoparasitism. Many efficient chitinolytic fungi with potential applications have been identified in a variety of environments, including soil, water, marine wastes, and plants. The current review highlights the key sources of chitinolytic fungi and the characterization of fungal chitinases. It also discusses the applications of fungal chitinases and the cloning of fungal chitinase genes.

Bioconversion of chitin into chitin oligosaccharides using a novel chitinase with high chitin-binding capacity

Chitin is the second largest renewable biomass resource in nature, it can be enzymatically degraded into high-value chitin oligosaccharides (CHOSs) by chitinases. In this study, a chitinase (ChiC8-1) was purified and biochemically characterized, its structure was analyzed by molecular modeling. ChiC8-1 had a molecular mass of approximately 96 kDa, exhibited its optimal activity at pH 6.0 and 50 °C. The K_m and V_max values of ChiC8-1 towards colloidal chitin were 10.17 mg mL^-1 and 13.32 U/mg, respectively. Notably, ChiC8-1 showed high chitin-binding capacity, which may be related to the two chitin binding domains in the N-terminal. Based on the unique properties of ChiC8-1, a modified affinity chromatography method, which combines protein purification with chitin hydrolysis process, was developed to purify ChiC8-1 while hydrolyzing chitin. In this way, 9.36 ± 0.18 g CHOSs powder was directly obtained by hydrolyzing 10 g colloidal chitin with crude enzyme solution. The CHOSs were composed of 14.77-2.83 % GlcNAc and 85.23-97.17 % (GlcNAc)₂ at different enzyme-substrate ratio. This process simplifies the tedious purification and separation steps, and may enable its potential application in the field of green production of chitin oligosaccharides.

Biochemical Properties of a Cold-Active Chitinase from Marine Trichoderma gamsii R1 and Its Application to Preparation of Chitin Oligosaccharides

The enzymatic degradation of different chitin polymers into chitin oligosaccharides (COSs) is of great significance given their better solubility and various biological applications. Chitinase plays a pivotal role in the enzymatic preparation of COSs. Herein, a cold-adapted and efficient chitinase (ChiTg) from the marine Trichoderma gamsii R1 was purified and characterized. The optimal temperature of ChiTg was 40 °C, and the relative activity at 5 °C was above 40.1%. Meanwhile, ChiTg was active and stable from pH 4.0 to 7.0. As an endo-type chitinase, ChiTg exhibited the highest activity with colloidal chitin, then with ball-milled and powdery chitin. In addition, ChiTg showed high efficiency when hydrolyzing colloidal chitin at different temperatures, and the end products were mainly composed of COSs with one to three degrees of polymerization. Furthermore, the results of bioinformatics analysis revealed that ChiTg belongs to the GH18 family, and its acidic surface and the flexible structure of its catalytic site may contribute to its high activity in cold conditions. The results of this study provide a cold-active and efficient chitinase and ideas for its application regarding the preparation of COSs from colloidal chitin.

Mechano-Enzymatic Degradation of the Chitin from Crustacea Shells for Efficient Production of N-acetylglucosamine (GlcNAc)

Chitin, the second richest polymer in nature, is composed of the monomer N-acetylglucosamine (GlcNAc), which has numerous functions and is widely applied in the medical, food, and chemical industries. However, due to the highly crystalline configuration and low accessibility in water of the chitin resources, such as shrimp and crab shells, the chitin is difficult utilize, and the traditional chemical method causes serious environment pollution and a waste of resources. In the present study, three genes encoding chitinolytic enzymes, including the N-acetylglucosaminidase from Ostrinia furnacalis (OfHex1), endo-chitinase from Trichoderma viride (TvChi1), and multifunctional chitinase from Chitinolyticbacter meiyuanensis (CmChi1), were expressed in the Pichia pastoris system, and the positive transformants with multiple copies were isolated by the PTVA (post-transformational vector amplification) method, respectively. The three recombinants OfHex1, TvChi1, and CmChi1 were induced by methanol and purified by the chitin affinity adsorption method. The purified recombinants OfHex1 and TvChi1 were characterized, and they were further used together for degrading chitin from shrimp and crab shells to produce GlcNAc through liquid-assisted grinding (LAG) under a water-less condition. The substrate chitin concentration reached up to 300 g/L, and the highest yield of the product GlcNAc reached up to 61.3 g/L using the mechano-enzymatic method. A yield rate of up to 102.2 g GlcNAc per 1 g enzyme was obtained.

Biodegradation and Prospect of Polysaccharide from Crustaceans

Marine crustacean waste has not been fully utilized and is a rich source of chitin. Enzymatic degradation has attracted the wide attention of researchers due to its unique biocatalytic ability to protect the environment. Chitosan (CTS) and its derivative chitosan oligosaccharides (COSs) with various biological activities can be obtained by the enzymatic degradation of chitin. Many studies have shown that chitosan and its derivatives, chitosan oligosaccharides (COSs), have beneficial properties, including lipid-lowering, anti-inflammatory and antitumor activities, and have important application value in the medical treatment field, the food industry and agriculture. In this review, we describe the classification, biochemical characteristics and catalytic mechanisms of the major degrading enzymes: chitinases, chitin deacetylases (CDAs) and chitosanases. We also introduced the technology for enzymatic design and modification and proposed the current problems and development trends of enzymatic degradation of chitin polysaccharides. The discussion on the characteristics and catalytic mechanism of chitosan-degrading enzymes will help to develop new types of hydrolases by various biotechnology methods and promote their application in chitosan.

Polyextremophilic Chitinolytic Activity by a Marine Strain (IG119) of Clonostachys rosea

The investigation for novel unique extremozymes is a valuable business for which the marine environment has been overlooked. The marine fungus Clonostachys rosea IG119 was tested for growth and chitinolytic enzyme production at different combinations of salinity and pH using response surface methodology. RSM modelling predicted best growth in-between pH 3.0 and 9.0 and at salinity of 0-40‱, and maximum enzyme activity (411.137 IU/L) at pH 6.4 and salinity 0‱; however, quite high production (>390 IU/L) was still predicted at pH 4.5-8.5. The highest growth and activity were obtained, respectively, at pH 4.0 and 8.0, in absence of salt. The crude enzyme was tested at different salinities (0-120‱) and pHs (2.0-13.0). The best activity was achieved at pH 4.0, but it was still high (in-between 3.0 and 12.0) at pH 2.0 and 13.0. Salinity did not affect the activity in all tested conditions. Overall, C. rosea IG119 was able to grow and produce chitinolytic enzymes under polyextremophilic conditions, and its crude enzyme solution showed more evident polyextremophilic features. The promising chitinolytic activity of IG119 and the peculiar characteristics of its chitinolytic enzymes could be suitable for several biotechnological applications (i.e., degradation of salty chitin-rich materials and biocontrol of spoiling organisms, possibly solving some relevant environmental issues).

Current Perspectives on Chitinolytic Enzymes and Their Agro-Industrial Applications

Chitinases are a large and diversified category of enzymes that break down chitin, the world's second most prevalent polymer after cellulose. GH18 is the most studied family of chitinases, even though chitinolytic enzymes come from a variety of glycosyl hydrolase (GH) families. Most of the distinct GH families, as well as the unique structural and catalytic features of various chitinolytic enzymes, have been thoroughly explored to demonstrate their use in the development of tailor-made chitinases by protein engineering. Although chitin-degrading enzymes may be found in plants and other organisms, such as arthropods, mollusks, protozoans, and nematodes, microbial chitinases are a promising and sustainable option for industrial production. Despite this, the inducible nature, low titer, high production expenses, and susceptibility to severe environments are barriers to upscaling microbial chitinase production. The goal of this study is to address all of the elements that influence microbial fermentation for chitinase production, as well as the purifying procedures for attaining high-quality yield and purity.

Heterologous expression and characterization of thermostable chitinase and β-N-acetylhexosaminidase from Caldicellulosiruptor acetigenus and their synergistic action on the bioconversion of chitin into N-acetyl-d-glucosamine

The bioconversion of chitin into N-acetyl-d-glucosamine (GlcNAc) using chitinolytic enzymes is one of the important avenues for chitin valorization. However, industrial applications of chitinolytic enzymes have been limited by their poor thermostability. Therefore, it is necessary to discover thermostable chitinolytic enzymes for GlcNAc production from chitin. In this study, two chitinolytic enzyme-encoding genes CaChiT and CaHex from Caldicellulosiruptor acetigenus were identified and heterologously expressed in Escherichia coli. The purified recombinant CaChiT and CaHex showed optimal activities at 70 °C and 90 °C respectively, and exhibited good thermostability over a range of temperature below 70 °C and broad pH stability at pH range of 3.0-8.0. CaChiT and CaHex were active on colloidal chitin, pNP-(GlcNAc)₂, pNP-(GlcNAc)₃, and pNP-GlcNAc, pNP-(GlcNAc)₂, pNP-(GlcNAc)₃, pNP-Glc respectively. Besides, the chitin oligosaccharides and colloidal chitin hydrolysis profiles revealed that CaChiT degraded chitin chains through exo-mode of action. Furthermore, CaChiT and CaHex exhibited a synergistic effect in the degradation of colloidal chitin, reaching 0.60 mg/mL of GlcNAc production after 1 h incubation. These results suggested that a combination of CaChiT and CaHex have great potential for industrial applications in the enzymatic production of GlcNAc from chitin-containing biowastes.

Insights into the Lignocellulose-Degrading Enzyme System of Humicola grisea var. thermoidea Based on Genome and Transcriptome Analysis

Humicola grisea var. thermoidea is a thermophilic ascomycete and important enzyme producer that has an efficient enzymatic system with a broad spectrum of thermostable carbohydrate-active (CAZy) enzymes. These enzymes can be employed in lignocellulose biomass deconstruction and other industrial applications. In this work, the genome of H. grisea var. thermoidea was sequenced. The acquired sequence reads were assembled into a total length of 28.75 Mbp. Genome features correlate with what was expected for thermophilic Sordariomycetes. The transcriptomic data showed that sugarcane bagasse significantly upregulated genes related to primary metabolism and polysaccharide deconstruction, especially hydrolases, at both pH 5 and pH 8. However, a number of exclusive and shared genes between the pH values were found, especially at pH 8. H. grisea expresses an average of 211 CAZy enzymes (CAZymes), which are capable of acting in different substrates. The top upregulated genes at both pH values represent CAZyme-encoding genes from different classes, including acetylxylan esterase, endo-1,4-β-mannosidase, exoglucanase, and endoglucanase genes. For the first time, the arsenal that the thermophilic fungus H. grisea var. thermoidea possesses to degrade the lignocellulosic biomass is shown. Carbon source and pH are of pivotal importance in regulating gene expression in this organism, and alkaline pH is a key regulatory factor for sugarcane bagasse hydrolysis. This work paves the way for the genetic manipulation and robust biotechnological applications of this fungus.

IMPORTANCE Most studies regarding the use of fungi as enzyme producers for biomass deconstruction have focused on mesophile species, whereas the potential of thermophiles has been evaluated less. This study revealed, through genome and transcriptome analyses, the genetic repertoire of the biotechnological relevant thermophile fungus Humicola grisea. Comparative genomics helped us to further understand the biology and biotechnological potential of H. grisea. The results demonstrate that this fungus possesses an arsenal of carbohydrate-active (CAZy) enzymes to degrade the lignocellulosic biomass. Indeed, it expresses more than 200 genes encoding CAZy enzymes when cultivated in sugarcane bagasse. Carbon source and pH are key factors for regulating the gene expression in this organism. This work shows, for the first time, the great potential of H. grisea as an enzyme producer and a gene donor for biotechnological applications and provides the base for the genetic manipulation and robust biotechnological applications of this fungus.

Chemoenzymatic production of chitooligosaccharides employing ionic liquids and Thermomyces lanuginosus chitinase

The aim of this work was to study a two-step chemoenzymatic method for production of short chain chitooligosaccharides. Chitin was chemically pretreated using sulphuric acid, sodium hydroxide and two different ionic liquids, 1-Ethyl-3-methylimidazolium bromide and Trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate under mild processing conditions. Pretreated chitin was further hydrolyzed employing purified chitinase from Thermomyces lanuginosus ITCC 8895. Trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate treated chitin appeared amorphous and resulted in generation of 1.10 ± 0.89 mg ml^-1 of (GlcNAc)₂ and 1.07 ± 0.92 mg ml^-1 of (GlcNAc)₃. Further derivation of optimum conditions through two-factor-9 run experiments resulted in to 1.5 and 1.3 fold increments in (GlcNAc)₂ and (GlcNAc)₃ production, respectively. 0.1 g of both (GlcNAc)₂ and (GlcNAc)₃ has been purified from the Trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate pretreated chitin (1 g) employing cation exchange chromatography. The present study will lay the foundation for development of a green sustainable solution for cost effective upcycling of coastal residual resources to chito-bioactives.

Microbial chitinases: properties, enhancement and potential applications

Chitinases are a category of hydrolytic enzymes that catalyze chitin and are formed by a wide variety of microorganisms. In nature, microbial chitinases are primarily responsible for chitin decomposition and play a vital role in the balance of carbon and nitrogen ratio in the ecosystem. The physicochemical attributes and the source of chitinase are the main bases that determine their functional characteristics and hydrolyzed products. Several chitinases have been reported and characterized, and they obtain a wider consideration for their utilization in a large number of uses such as in agriculture, food, environment, medicine and pharmaceutical companies. The antifungal and insecticidal impacts of several chitinases have been extensively studied, aiming to protect crops from phytopathogenic fungi and insects. Chitooligosaccharides synthesized by chitin degradation have been shown to improve human health through their antimicrobial, antioxidant, anti-inflammatory and antitumor properties. This review aims at investigating chitinase production, properties and their potential applications in various biotechnological fields.

Optimization of process parameters for improved chitinase activity from Thermomyces sp. by using artificial neural network and genetic algorithm

Chitinase is responsible for the breaking down of chitin to N-acetyl-glucosamine units linked through (1-4)-glycosidic bond. The chitinases find several applications in waste management and pest control. The high yield with characteristics thermal stability of chitinase is the key to their industrial application. Therefore, the present work focuses on parameter optimization for chitinase production using fungus Thermomyces lanuginosus MTCC 9331. Three different optimization approaches, namely, response surface methodology (RSM), artificial neural network (ANN) and genetic algorithm (GA) were used. The parameters under study were incubation time, pH and inoculum size. The central composite design with RSM was used for the optimization of the process parameters. Further, results were validated with GA and ANN. A multilayer feed-forward algorithm was performed for ANN, i.e., Levenberg-Marquardt, Bayesian Regularization, and Scaled Conjugate Gradient. The ANN predicted values gave higher chitinase activity, i.e., 102.24 U/L as compared to RSM-predicted values, i.e., 88.38 U/L. The predicted chitinase activity was also closer to the observed data at these levels. The validation study suggested that the highest activity of chitinase as predicted by ANN is in line with experimental analysis. The comparison of three different statistical approaches suggested that ANN gives better optimization results compared to the GA and RSM study.

Biochemical and molecular characterization of an acido-thermostable endo-chitinase from Bacillus altitudinis KA15 for industrial degradation of chitinous waste

This paper reports the isolation and identification of an acido-thermostable chitinase (ChiA-Ba43) which was purified, from the culture liquid of Bacillus altitudinis strain KA15, and characterized. Purification of ChiA-Ba43 produced a 69.6-fold increase in the specific activity (120,000 U/mg) of the chitinase, with a yield of 51% using colloidal chitin as substrate. ChiA-Ba43 was found to be a monomeric protein with a molecular mass of 43,190.05 Da as determined by MALDI-TOF/MS. N-terminal sequence of the first 27 amino-acids (aa) of ChiA-Ba43 displayed homology to chitinases from other Bacillus species. Interestingly, ChiA-Ba43 exhibited optimum pH and temperature of 4-5.5 and 85 °C, respectively. Thin-layer chromatography (TLC) showed that the final hydrolyzed products of the enzyme from chitin-oligosaccharides and colloidal chitin are a mixture of (GlcNAc)₂, (GlcNAc)₃, (GlcNAc)₄, and (GlcNAc)₅, which indicates that ChiA-Ba43 possesses an endo-acting function. More interestingly, compared to ChiA-Mt45, ChiA-Hh59, Chitodextrinase®, N-acetyl-β-glucosaminidase®, and ChiA-65, ChiA-Ba43 demonstrated a high level of catalytic efficiency and outstanding tolerance towards various organic solvents. The chiA-Ba43 gene (1332 bp) encoding ChiA-Ba43 (409 aa) was cloned, sequenced, and expressed in Escherichia coli strain HB101. The biochemical properties of the recombinant chitinase (rChiA-Ba43) were equivalent to those of the natively expressed enzyme. These properties make ChiA-Ba43 an ideal candidate for industrial bioconversion of chitinous waste.

Chemoenzymatic Production and Engineering of Chitooligosaccharides and N-acetyl Glucosamine for Refining Biological Activities

Chitooligosaccharides (COS) and N-acetyl glucosamine (GlcNAc) are currently of enormous relevance to pharmaceutical, nutraceutical, cosmetics, food, and agriculture industries due to their wide range of biological activities, which include antimicrobial, antitumor, antioxidant, anticoagulant, wound healing, immunoregulatory, and hypocholesterolemic effects. A range of methods have been developed for the synthesis of COS with a specific degree of polymerization along with high production titres. In this respect, chemical, enzymatic, and microbial means, along with modern genetic manipulation techniques, have been extensively explored; however no method has been able to competently produce defined COS and GlcNAc in a mono-system approach. Henceforth, the chitin research has turned toward increased exploration of chemoenzymatic processes for COS and GlcNAc generation. Recent developments in the area of green chemicals, mainly ionic liquids, proved vital for the specified COS and GlcNAc synthesis with better yield and purity. Moreover, engineering of COS and GlcNAc to generate novel derivatives viz. carboxylated, sulfated, phenolic acid conjugated, amino derived COS, etc., further improved their biological activities. Consequently, chemoenzymatic synthesis and engineering of COS and GlcNAc emerged as a useful approach to lead the biologically-active compound-based biomedical research to an advanced prospect in the forthcoming era.

Enzymatic Modifications of Chitin, Chitosan, and Chitooligosaccharides

Chitin and its N-deacetylated derivative chitosan are two biological polymers that have found numerous applications in recent years, but their further deployment suffers from limitations in obtaining a defined structure of the polymers using traditional conversion methods. The disadvantages of the currently used industrial methods of chitosan manufacturing and the increasing demand for a broad range of novel chitosan oligosaccharides (COS) with a fully defined architecture increase interest in chitin and chitosan-modifying enzymes. Enzymes such as chitinases, chitosanases, chitin deacetylases, and recently discovered lytic polysaccharide monooxygenases had attracted considerable interest in recent years. These proteins are already useful tools toward the biotechnological transformation of chitin into chitosan and chitooligosaccharides, especially when a controlled non-degradative and well-defined process is required. This review describes traditional and novel enzymatic methods of modification of chitin and its derivatives. Recent advances in chitin processing, discovery of increasing number of new, well-characterized enzymes and development of genetic engineering methods result in rapid expansion of the field. Enzymatic modification of chitin and chitosan may soon become competitive to conventional conversion methods.

A potent chitin-hydrolyzing enzyme from Myrothecium verrucaria affects growth and development of Helicoverpa armigera and plant fungal pathogens

Chitin, a crucial structural and functional component of insects and fungi, serves as a target for pest management by utilizing novel chitinases. Here, we report the biocontrol potential of recombinant Myrothecium verrucaria endochitinase (rMvEChi) against insect pest and fungal pathogens. A complete ORF of MvEChi (1185 bp) was cloned and heterologously expressed in Escherichia coli. Structure based sequence alignment of MvEChi revealed the presence of conserved domains SXGG and DXXDXDXE specific for GH-18 family, involved in substrate binding and catalysis, respectively. rMvEChi (46.6 kDa) showed optimum pH and temperature as 7.0 and 30 °C, respectively. Furthermore, rMvEChi remained stable within the pH range of 6.0 to 8.0 and up to 40 °C. rMvEChi exhibited k_cat/K_m values of 129.83 × 10³ [(g/L)^-1 s^-1] towards 4MU chitotrioside. Hydrolysis of chitooligosaccharides with various degrees of polymerization (DP) using rMvEChi indicated the release of DP2 as main end product with order of reaction as DP6 > DP5 > DP4 > DP3. Bioassay of rMvEChi against Helicoverpa armigera displayed potent anti-feedant activity and induced mortality. In vitro antifungal activity against plant pathogenic fungi (Ustilago maydis and Bipolaris sorokiniana) exhibited significant inhibition of mycelium growth. These results suggest that MvEChi has significant potential in enzyme-based pest and pathogen management.

Conversion of Chitin to Defined Chitosan Oligomers: Current Status and Future Prospects

Chitin is an abundant polysaccharide primarily produced as an industrial waste stream during the processing of crustaceans. Despite the limited applications of chitin, there is interest from the medical, agrochemical, food and cosmetic industries because it can be converted into chitosan and partially acetylated chitosan oligomers (COS). These molecules have various useful properties, including antimicrobial and anti-inflammatory activities. The chemical production of COS is environmentally hazardous and it is difficult to control the degree of polymerization and acetylation. These issues can be addressed by using specific enzymes, particularly chitinases, chitosanases and chitin deacetylases, which yield better-defined chitosan and COS mixtures. In this review, we summarize recent chemical and enzymatic approaches for the production of chitosan and COS. We also discuss a design-of-experiments approach for process optimization that could help to enhance enzymatic processes in terms of product yield and product characteristics. This may allow the production of novel COS structures with unique functional properties to further expand the applications of these diverse bioactive molecules.

Efficient enzymatic hydrolysis of ionic liquid pretreated chitin and its dissolution mechanism

Colloidal chitin, the substrate of chitinase with an open hydrated gel-like structure, can be obtained by treatment using either traditional hydrochloric acid (HCl) or ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]). IL-pretreated chitin provided an efficient production of N-acetylglucosamine (175.62 mg g chitin) and N,N'-diacetylchitobiose (341.70 mg g chitin) with a conversion of 61.49% at 48 h catalyzed by chitinase from Streptomyces albolongus ATCC 27414. A short time second homogenization treatment after IL pretreatment can increase the conversion to 76.11%. A comprehensive characterization and comparison of chitin with different pretreatments suggested that enzymatic performances were correlated with the structural changes (size of the grains and porosity), high decrease in crystallinity, and high enzyme adsorption. The NMR spectroscopy studies of N-acetylglucosamine solvation in [Emim][OAc] clearly suggest that hydrogen bonding is formed between the hydroxyls of N-acetylglucosamine and both the anions and cations of the IL.