Magnetic hybrid of cyclodextrin nanosponge and polyhedral oligomeric silsesquioxane: Efficient catalytic support for immobilization of Pd nanoparticles

Sulphated zirconia on cyclodextrin nanosponge: A carbohydrate-based catalyst for conversion of mono-saccharides to 5-hydroxymethylfurfural

To expand the utility of cyclodextrin nanosponges for catalytic purpose, β-cyclodextrin nanosponge was prepared via melting method and then utilized as a catalyst support for the stabilization of sulphated zirconia. The resulting catalyst, denoted as CDNS-SO42-/ZrO2, was then applied as a heterogeneous acidic catalyst for conversion of fructose to 5-hydroxymethylfurfural. The results, underpinned that the catalytic activity of CDNS-SO42-/ZrO2, was superior to that of ZrO2 and SO42-/ZrO2, confirming the role of sulfonation of ZrO2 and immobilization of SO42-/ZrO2 on CDNS in catalysis. To optimize the reaction parameters and achieve maximum yield of the desired product, Response Surface Method that is an accurate procedure for appraising the impacts of the reaction variables was employed and it was found that using 35 wt% CDNS-SO42-/ZrO2 at 80 °C, HMF in 93 % yield was achieved in 45 min. Kinetic study also showed that the activation energy was 13.28 kJ/mol. Furthermore, thermodynamic parameters, i.e. enthalpy, entropy and Gibbs free energy were estimated as 10.46 kJ/mol, -150.40 J/mol and 63.58 kJ/mol respectively. Noteworthy, the catalysis was true heterogeneous, as confirmed by Hot filtration test and the catalyst could be recycled several times with low leaching of SO42-/ZrO2.

Click nanosponge - A novel amine-rich β-cyclodextrin-based crosslinked polymer for heterogeneous catalysis

Cyclodextrin-based nanosponges are promising materials for heterogeneous catalysis due to their inherent synthetic versatility, tunable porosity and nontoxicity. In this work, a primary amine-rich β-cyclodextrin nanosponge was synthesized via click imine condensation reaction between 1,6-hexamethylamine-functionalized β-cyclodextrin (CDAM) and glutaraldehyde (GLT) to afford CDGLAM, in mild conditions. The crosslinked polymer exhibited a BET surface area of 36.39 m2 g-1, an average pore diameter of 3.09 nm (as assessed by the BJH method), and thermal stability up to 253 °C. CDGLAM was tested as heterogeneous catalyst for the metal-free Henry and Knoevenagel reactions, between aromatic aldehydes and nitromethane or ethyl cyanoacetate, respectively, affording the products in moderate to very high yields. These results show the ease of preparation of β-CD-based nanosponges from a green chemistry perspective, as well as their potential for future use in catalytic systems.

Anti-Gene IGF-I Vaccines in Cancer Gene Therapy: A Review of a Case of Glioblastoma

OBJECTIVE

Vaccines for the deadliest brain tumor - glioblastoma (GBM) - are generally based on targeting growth factors or their receptors, often using antibodies. The vaccines described in the review were prepared to suppress the principal cancer growth factor - IGF-I, using anti-gene approaches either of antisense (AS) or of triple helix (TH) type. Our objective was to increase the median survival of patients treated with AS and TH cell vaccines.

METHODOLOGY

The cells were transfected in vitro by both constructed IGF-I AS and IGF-I TH expression episomal vectors; part of these cells was co-cultured with plant phytochemicals, modulating IGF-I expression. Both AS and TH approaches completely suppressed IGF-I expression and induced MHC-1 / B7 immunogenicity related to the IGF-I receptor signal.

RESULTS

This immunogenicity proved to be stronger in IGF-I TH than in IGF-I AS-prepared cell vaccines, especially in TH / phytochemical cells. The AS and TH vaccines generated an important TCD8+ and TCD8+CD11b- immune response in treated GBM patients and increased the median survival of patients up to 17-18 months, particularly using TH vaccines; in some cases, 2- and 3-year survival was reported. These clinical results were compared with those obtained in therapies targeting other growth factors.

CONCLUSION

The anti-gene IGF-I vaccines continue to be applied in current GBM personalized medicine. Technical improvements in the preparation of AS and TH vaccines to increase MHC-1 and B7 immunogenicity have, in parallel, allowed to increase in the median survival of patients.

Fabrication of uniform Pd nanoparticles immobilized on crosslinked ionic chitosan support as a super-active catalyst toward regioselective synthesis of pyrazole-fused heterocycles

Selection of biodegradable chitosan as a raw material is a smart technique due to its easy modifiability and high renewability. Herein, taking advantage of these functional characteristics, an ionic biopolymer support is produced from copolymerization of allylated chitosan (with 48 % degree of substitution) and polymerizable ionic liquid ([MEVIm]Br). Next, palladium nanoparticles are successfully stabilized in this designed support through a facile manner based on interconnected porous network, ionic nature and rich functional groups. Then, the Pd@CS-PIL structure was utilized as a heterogeneous catalyst for regioselective synthesis of pyrazole-fused heterocycles. The as-synthesized Pd@CS-PIL was characterized by various techniques such as XRD, EDX, FESEM, elemental mapping, TEM, BET, ICP, TGA, and FT-IR to better determine the structure, morphology, purity and physical properties. The obtained results revealed that the proposed nanostructure provides favorable porosity with significant specific surface area (139.2 m2.g-1), Pd nanoparticles with high dispersion (mean diameter ∼ 22.8 nm) and crosslinked nature with good thermal stability (50 % weight loss about 600 °C). Therefore, Pd@CS-PIL nanostructure showed the key features of a super-active catalyst, and pharmaceutical pyrazole-fused scaffolds were produced in favorable yields (86-96 %) under ultrasound conditions.

Cyclodextrin Inclusion Complexes for Improved Drug Bioavailability and Activity: Synthetic and Analytical Aspects

Many active pharmaceutical ingredients show low oral bioavailability due to factors such as poor solubility and physical and chemical instability. The formation of inclusion complexes with cyclodextrins, as well as cyclodextrin-based polymers, nanosponges, and nanofibers, is a valuable tool to improve the oral bioavailability of many drugs. The microencapsulation process modifies key properties of the included drugs including volatility, dissolution rate, bioavailability, and bioactivity. In this context, we present relevant examples of the stabilization of labile drugs through the encapsulation in cyclodextrins. The formation of inclusion complexes with drugs belonging to class IV in the biopharmaceutical classification system as an effective solution to increase their bioavailability is also discussed. The stabilization and improvement in nutraceuticals used as food supplements, which often have low intestinal absorption due to their poor solubility, is also considered. Cyclodextrin-based nanofibers, which are polymer-free and can be generated using environmentally friendly technologies, lead to dramatic bioavailability enhancements. The synthesis of chemically modified cyclodextrins, polymers, and nanosponges based on cyclodextrins is discussed. Analytical techniques that allow the characterization and verification of the formation of true inclusion complexes are also considered, taking into account the differences in the procedures for the formation of inclusion complexes in solution and in the solid state.

Nanoconjugates based on a novel organic-inorganic hybrid silsesquioxane and gold nanoparticles as hemocompatible nanomaterials for promising biosensing applications

A new hybrid organic-inorganic silsesquioxane material, 3-n-propyl(2-amino-4-methyl)pyridium chloride (SiAMPy⁺Cl^-), was synthesized and successfully applied for the synthesis of stable nanoconjugates with gold nanoparticles (AuNPs-SiAMPy⁺). SiAMPy⁺Cl^- was obtained through a simple sol-gel procedure by using chloropropyltrimetoxysilane and tetraethylorthosilicate as precursors and 2-amino-4-methylpyridine as the functionalizing agent. The resulting material was characterized by employing FTIR, XRD, and ¹H-, ¹³C-, and ²⁹Si-NMR spectroscopy. The synthesis of AuNPs-SiAMPy⁺ nanoconjugates was optimized through a 2³ full factorial design. UV-VIS, FTIR, TEM, DLS, and ζ-potential measurements were used to characterize the nanoconjugates, which presented a spherical morphology with an average diameter of 5.8 nm. To investigate the existence of toxic effects of AuNPs-SiAMPy⁺ on blood cells, which is essential for their future biomedical applications, toxicity assays on human erythrocytes and leukocytes were performed. Interestingly, no cytotoxic effects were observed for both types of cells. The nanoconjugates were further applied in the construction of electrochemical immunosensing devices, aiming the detection of anti-Trypanosoma cruzi antibodies in serum as biomarkers of Chagas disease. The AuNPs-SiAMPy⁺ significantly enhanced the sensitivity of the biodevice, which was able to discriminate between anti-T. cruzi positive and negative serum samples. Thus, the AuNPs-SiAMPy⁺-based biosensor showed great potential to be used as a new tool to perform fast and accurate diagnosis of Chagas disease. The promising findings described herein strongly confirm the remarkable potential of SiAMPy⁺Cl^- to obtain nanomaterials, which can present notable biomedical properties and applications.

Cyclodextrin-Based Nanosponges: Overview and Opportunities

Nanosponges are solid cross-linked polymeric nano-sized porous structures. This broad concept involves, among others, metal organic frameworks and hydrogels. The focus of this manuscript is on cyclodextrin-based nanosponges. Cyclodextrins are cyclic oligomers of glucose derived from starch. The combined external hydrophilicity with the internal hydrophobic surface constitute a unique "microenvironment", that confers cyclodextrins the peculiar ability to form inclusion host‒guest complexes with many hydrophobic substances. These complexes may impart beneficial modifications of the properties of guest molecules such as solubility enhancement and stabilization of labile guests. These properties complemented with the possibility of using different crosslinkers and high polymeric surface, make these sponges highly suitable for a large range of applications. Despite that, in the last 2 decades, cyclodextrin-based nanosponges have been developed for pharmaceutical and biomedical applications, taking advantage of the nontoxicity of cyclodextrins towards humans. This paper provides a critical and timely compilation of the contributions involving cyclodextrins nanosponges for those areas, but also paves the way for other important applications, including water and soil remediation and catalysis.

Ag Nanoparticles Stabilized on Cyclodextrin Polymer Decorated with Multi-Nitrogen Atom Containing Polymer: An Efficient Catalyst for the Synthesis of Xanthenes

In attempt to broaden the use of cyclodextrin polymer for catalytic purposes, a novel covalent hybrid system was prepared through growth of multi-nitrogen atom containing polymer (PMelamine) derived from reaction of ethylenediamine and 2,4,6-trichloro-1,3,5-triazine on the functionalized cyclodextrin polymer (CDNS). The resulting hybrid system was then utilized as a catalyst support for the immobilization of silver nanoparticles through using Cuscuta epithymum extract as a naturally-derived reducing agent. The catalytic activity of the catalyst, Ag@CDNS-N/PMelamine, for the synthesis of xanthenes through reaction of aldehydes and dimedone in aqueous media was examined. The results showed high catalytic activity and recyclability of the catalyst. It was believed that cyclodextrin in the backbone of the catalyst could act both as a capping agent for Ag nanoparticles and phase transfer agent to bring the hydrophobic substrates in the vicinity of the catalytic active sites and accelerate the reaction rate. Multi-nitrogen atoms on the polymer, on the other hand, could improve the Ag NPs anchoring and suppress their leaching.

POSS nanostructures in catalysis

In this review we highlight the use of appealing POSS-based nanostructures for both homogeneous and heterogeneous catalytic applications.